Search Results

Search found 32610 results on 1305 pages for 'internet options'.

Page 596/1305 | < Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >

  • Dual booting Linux/Win7, Grub refuses to load Win7

    - by JohnB
    Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

    Read the article

  • Configure Domino to use SMTP routing and hMailServer

    - by Sébastien Lachance
    I have been trying for a couple of days to set up a Domino 8.5 server. Basically, I want everything to be run inside a local network. Right now I can send email to other user in the Domino directory without any mail address. I am pretty new to all this stuff, so maybe the answer will be really obvious. What I need to do is be able to send a mail from somewhere else to a domino user that will be redirected to his account. On the Domino server, I also have hMailServer installed on port 25. I configured Domino to use port 26. I followed those step to get where I am now. -I have set the Fully qualified Internet host name to "preview.notes". -Smtp Listener task changed to Enabled to turn on the Listener so that the server can receive messages routed via SMTP routing -Setting up SMTP routing within the local Internet domain (http://www.h2l.com/help/help85%5Fadmin.nsf/f4b82fbb75e942a6852566ac0037f284/7f9738a49efc4f58852574d500097b01?OpenDocument) -I modified the person to use the [email protected] address. -I'm using the hMailServer (which have the local "preview.local" domain name) to send mail to [email protected]. When sending mail I got an error telling that the DNS is not set up correctly. Is using the Domino Smtp server instead of hMailServer will solve the problem? I can Telnet the Domino Smtp Server.

    Read the article

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • SQL Server restore a backup results in an error.

    - by Mario
    I have a database in dev (SQL Server 2005 on Windows Server 2008) that I need to move to prod (SQL Server 2000 on Windows Server 2003). My process is as follows: Login to dev, open SQL Server Management Studio Right click on the database | Tasks | Backup. Keep all default options (full backup etc.) Move .bak file locally to prod (no network drive), login to prod, open SQL Server Enterprise Manager. Right click Databases node | All Tasks | Restore database. Change Restore as database to reflect the same database name. Click radio button 'From device'. Click 'Select Devices' Click Restore from: Add..., browse to .bak file (small - only 6mb) Now I am ready to restore the database, so I click OK and get the following error: "The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE DATABASE is terminating abnormally." This error is immediate. I have tried a few different variations of this - restoring the db to dev machine with a different db name and log file names (where it originated), creating an empty database with the same physical path to files before and trying to restore to that, making a few different .bak files and making sure they are verified before uploading them to prod. I know for a fact the directory for the .mdf and .ldf files exist on prod, though the files themselves don't exist. If, before I click OK to restore, go to the options tab instead I get the following error: Error 3241: The media family on device 'E:...bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE FILELIST is terminating abnormally. Anyone have any bright ideas?

    Read the article

  • Issue resolving names on Hyper-V guest with Routing and Remote Access

    - by John Sheehan
    I've got a Win2k8 standard server running Hyper-V with a Server 2003 web guest instance running. The host is publicly available on the internet. I've created an Internal Private network in the Hyper-V Virtual Network manager. I've set the host IP for that virtual adapter to 192.168.0.1. I've set the IP on the guest to 192.168.0.2. They can ping each other and share files. I can't browse the web on the guest though. NSLOOKUPs are working. I've tried setting the DNS server setting on the guest to 192.168.0.1 and something external like Google's 8.8.8.8 server to no avail. Windows firewall is disabled on the internal virtual network. I've tried it with both DNS installed on the host and without it. I'm not sure which RRAS/NAT settings are relevant to pass on so ask if you need me to clarify anything. How do I get outbound internet working on the guest VM?

    Read the article

  • Change which server mailbox is associated with in Exchange 2007

    - by tacos_tacos_tacos
    I have restored and mounted an EDB file onto a new Exchange 2007 Server. However, the old server is still online and although all the mailboxes I need are in the newly-mounted database, in Exchange 2007 System Manager it still shows that the mailbox is associated with the old server. If I try to "Move" the database it actually tries to copy the files from the old server to the new server, which is not necessary because they are already there - and produces and error about the mailbox on the destination already existing. How can I simply tell Exchange (AD?) to use the new server to find the mailbox rather than the old? Edit: I did the restore by taking the old server offline (turning off all Exchange services), copying EDB file to the new server, restoring it with eseutil, and mounting it to the new server. I did it this way in part because I didn't know a better way and in part because I couldn't use move-mailbox as the source location had a horrible Internet connection (which is why Exchange is being moved to the new location). I had to copy the EDB from the old server to a hard disk, go somewhere with a better Internet connection, upload the EDB to the new server.

    Read the article

  • ssh timeout issue connecting to an EC2 instance on OS X

    - by mamusr
    I am new to AWS and not a networking expert but curious to know more about it. I created a VPC with a public subnet only. Then i created an EC2 instance using an Ubuntu 14.04 64-bit pv AMI image (ami-e84d8480) as well generating the key pair needed to connect to it through ssh. I followed amazon's instructions to connect to an EC2 instance via ssh which did not work. Here is my attempted input and debug log: Running on OS X 10.9.4 user$ ssh -vvv -i key.pem [email protected] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 102: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: connect to address xxx.xxx.xxx.xxx port 22: Operation timed out ssh: connect to host xxx.xxx.xxx.xxx port 22: Operation timed out To attempt to resolve the issue: I enabled the SSH port. Tried different usernames other than ubuntu, like ec2-user and root. Initially set an inbound ssh rule in the security group to connect to only my ip address. When that did not work, i changed it to allow any ip to connect. But those actions did not fix the problem. Here are my guesses as to what i am missing in getting the EC2 instance connection to work. My etc/ssh_config file may be preventing the connection from taking place. I may have missed an important networking detail when setting up the VPC. I do not have a public ip address specified for the instance. I am connecting through the private ip address. My questions for the community: Am i going about it the wrong way connecting to the instance through the private ip address? if so, do i need to specify a public ip address for it to connect or some other method?

    Read the article

  • RRAS NAT not working on a certain computer

    - by legenden
    This is driving me crazy. I have a virtualized W2K8 server running RRAS. Every other computer or server on the network can access the internet through the NAT except one. On one server, it just won't work. I can ping the ip address of the NAT gateway just fine, and everything else works. (SMB, etc) DNS, which is hosted by the same server, also works just fine. I have even reinstalled the OS on the problem server and it still doesn't work. Recap of the steps I tried: There are 3 network cards in the server, I tried every one and different switch ports. Not a hardware problem. Reinstalled W2K8 R2 on server with the problem, didn't help. Tried the IP of the internet gateway directly - this did work (!). But I need NAT to work. All firewalls are disabled. Removed computer from domain, deleted computer membership in Active Directory Users and Computers and added it back. Disabled all other network adapters and set a static ip and specified the gateway ip manually. When I tracert a public IP, the first hop (or any other hop) comes up as: C:\>tracert www.google.com Tracing route to www.l.google.com [209.85.225.106] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. From a different computer, on which NAT works, the first hop comes up as: tracert www.google.com Tracing route to www.l.google.com [209.85.225.105] over a maximum of 30 hops: 1 <1 ms * <1 ms xxxx [10.5.1.1] This is the most bizarre problem I ever came across, and I realize that it's a long shot asking it here given all the details, but I'm pulling my hair out. Maybe someone has an idea...

    Read the article

  • Mail server: can't connect via POP/IMAP

    - by MelkerOVan
    I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=password Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=password Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

    Read the article

  • Windows 7 wireless not seeing any networks

    - by jkohlhepp
    I think I have managed to confuse Windows 7. When I did the install, I had the network cable plugged in to my router, but the wireless card was also enabled. During the install, Windows 7 seemed to see my wireless network and even asked me for the WEP key. I know that it used the WEP key because I initially entered an invalid one and it gave me an error. Then the network said "SoAndSoWireless Connected". However, when I unplug or disable my wired network card, then I have no internet, and it can't see any networks. When I plug in the wired network card, it says "SoAndSoWireless Connected". Under Network and Internet Network Connections I have "Local Area Connection" and "Wireless Network Connection". The wired one's status is "SoAndSoWireless" and the wireless status is "Not Connected". Also, the wireless connection can't seem to see any other wireless networks in the area and I know there are tons. My neighbors have several. I've somehow seemingly confused Windows 7 into thinking that my wired network card is my wireless card or something. Any ideas on how to un-confuse it? This is a desktop machine by the way, if it matters. EDIT: Ah, I think part of the problem is that I named my network accidentally the same as the name of the wireless network being broadcast by the wireless router. So that might be why it says that name on the hard-wired connection. Perhaps the drivers just are completely not working for the wireless card. Thanks, ~ Justin

    Read the article

  • 2 nics. 2 Defaults Gateways

    - by andre.dias
    Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits using eth0, traffic coming from eth1 exits using eth1. And there is a default gateway configured. $route: default IP 0.0.0.0 UG 0 0 0 eth0 With this configuration, the traffic generated in the server is going out using eth0 (lynx www.google.com for example). The problem is: the Internet link from eth0 went down today. The traffic coming from eth1 was ok...no problem. But the traffic generated in the server was a problem...the default gateway was out...no access do the Internet anymore (no more lynx www.google.com) So i added a new default gateway configuration, pointing to eth1. For 30 minutes i kept that way...2 default gateways, but just one was "working"...and everything was working just fine. But then i removed de eth0 gateway entry because, well, 2 default gateways is kind of weird. My question: is there any problem on keeping these 2 default gateways, one for each? So i don´t need to do nothing when one link go down again? $route: default IP1 0.0.0.0 UG 0 0 0 eth0 default IP2 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Replacing local home server with VPS: Suggestions?

    - by CamronBute
    So right now, I'm running an old box with a 2TB HDD in it. I use this as a file server for the home network, as well as a box for downloading large files which are synced via Dropbox. Lots of other tinkering things, too. Basically, I'm sick of paying extra for the power and having to worry about drive failures and whatnot. I'd rather get a remote server, let someone else manage it and provide access from the Internet. So, I've been looking for a Windows VPS that would give me access to install things and tinker, and I'm having a problem finding a host that offers more than 100GB of hard drive space. If they do offer a package with 100GB of storage, everything else is waaayyyy more than what I actually need. The idea is to create a permanent VPN connection from the cloud server to my home network to provide a transparent solution so I'm not having to go to lengths to transfer files or whatnot. I think a VPS solution will allow me to do this. I would like 1TB of storage space, minimum 100Mbps Internet connection, minimum 250GB bandwidth, admin access. Anyone have anything? Or am I being unreasonable? If I am, why?

    Read the article

  • Overriding routes on Openvpn client, iproute, iptables2

    - by sarvavijJana
    I am looking for some way to route packets based on its destination ports switching regular internet connection and established openvpn tunnel. This is my configuration OpenVPN server ( I have no control over it ) OpenVPN client running ubuntu wlan0 192.168.1.111 - internet connected if Several routes applied on connection to openvpn from server: /sbin/route add -net 207.126.92.3 netmask 255.255.255.255 gw 192.168.1.1 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 And I need to route packets regarding it's destination ports for ex: 80,443 into vpn everything else directly to isp connection 192.168.1.1 What i have used during my attempts: iptables -A OUTPUT -t mangle -p tcp -m multiport ! --dports 80,443 -j MARK --set-xmark 0x1/0xffffffff ip rule add fwmark 0x1 table 100 ip route add default via 192.168.1.1 table 100 I was trying to apply this settings using up/down options of openvpn client configuration All my attempts reduced to successful packet delivery and response only via vpn tunnel. Packets routed bypassing vpn i have used some SNAT to gain proper src address iptables -A POSTROUTING -t nat -o $IF -p tcp -m multiport --dports 80,443 -j SNAT --to $IF_IP failed in SYN-ACK like 0 0,1 0,1: "70","192.168.1.111","X.X.X.X","TCP","34314 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18664016 TSER=0 WS=7" "71","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584430 TSER=18654692 WS=5" "72","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584779 TSER=18654692 WS=5" "73","192.168.1.111","X.X.X.X","TCP","34343 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18673732 TSER=0 WS=7" I hope someone has already overcome such a situation or probably knows better approach to fulfill requirements. Please kindly give me a good advice or working solution.

    Read the article

  • NAT ports - how do they work?

    - by Davidoper
    I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

    Read the article

  • SSRS 2005 inaccessible after install

    - by Gabriel Guimarães
    Hi I've just installed SQL 2005 and Database Engine is ok, however I can't access it for nothing. When I go to http://localhost/reports I get this prompt for a username and password and it fails with 401.1. When I tried to disable kerberos on the virtual directories, nothing changed. I've tried changing the auth to anonymous and get: Internet Explorer cannot display the webpage. When I access from another machine, I get the prompt only once and get this error. Internet Explorer cannot display the webpage. Can't access this with IE or SSMS 2005. If I try to access with Management Studio i get this error: TITLE: Microsoft SQL Server Management Studio The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient) ADDITIONAL INFORMATION: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System) An existing connection was forcibly closed by the remote host (System) BUTTONS: OK By the way the server info: its a Win 2003 R2 Standard with IIS 6 Can't seem to understand this. Does anyone have a hint?

    Read the article

  • Configure nginx for multiple node.js apps with own domains

    - by udo
    I have a node webapp up and running with my nginx on debian squeeze. Now I want to add another one with an own domain but when I do so, only the first app is served and even if I go to the second domain I simply get redirected to the first webapp. Hope you see what I did wrong here: example1.conf: upstream example1.com { server 127.0.0.1:3000; } server { listen 80; server_name www.example1.com; rewrite ^/(.*) http://example1.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example1.com; access_log /var/log/nginx/example1.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example1.com; proxy_redirect off; } } example2.conf: upstream example2.com { server 127.0.0.1:1111; } server { listen 80; server_name www.example2.com; rewrite ^/(.*) http://example2.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example2.com; access_log /var/log/nginx/example2.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example2.com; proxy_redirect off; } } curl simply does this: zazzl:Desktop udo$ curl -I http://example2.com/ HTTP/1.1 301 Moved Permanently Server: nginx/1.2.2 Date: Sat, 04 Aug 2012 13:46:30 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: http://example1.com/ Thanks :)

    Read the article

  • Apache 403 Forbidden Error when accessing local web server using local IP address

    - by amjo324
    I have an odd problem when attempting to browse to pages stored on a local web server (Apache 2.2). The pages are served as expected when I browse to localhost or 127.0.0.1 on port 80. Yet when I attempt to browse to the same pages by referencing the local IP address (192.168.x.x), I receive a HTTP 403 (Forbidden) error. In essence, http://localhost:80 works but 192.168.x.x:80 doesn't even though I'm specifying the IP of the local machine. You may be thinking "who cares? just use localhost". However, this is the first step in troubleshooting why I cannot remotely access these pages from different hosts on my LAN. I'm presuming this can't be a firewall issue as I'm only connecting to the local machine. Even so, I verified there was no iptables rules that could be having an effect. I've checked the Apache error logs and the corresponding line of relevance is: [Sat Oct 19 07:38:35 2013] [error] [client 192.168.x.x] client denied by server configuration: /var/www/ I've inspected most of the apache config files and they don't appear to differ from what you would expect with a default install. I can't see anything in apache2.conf that would be a problem and httpd.conf is an empty file. This is an excerpt from /etc/apache2/sites-enabled/000-default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Any insight as to where I can look next to find a solution ? Thanks in advance.

    Read the article

  • How can I setup apache+mod_proxy so when I connect to mod_proxy on interface X, it sends the traffic

    - by aspitzer
    We use a service that allots us X number of requests per IP and has allows us to setup 5 IPs with such a limit (I know.. it seems stupid they could not just up the limit 5x on one IP). Pretend I have a linux box with the following address on the internet: 66.249.90.104 - that is an Google IP and not mine... so feel free to try to hack into it :) I setup apache+mod_proxy as a forwarding proxy (ProxyRequests On). i.e. you can setup firefox to use 66.249.90.104:8080 as a proxy, and all firefox traffic comes out as 66.249.90.104. So far so good. Problem: Now I add more alias interfaces so the total looks like this: eth0: 66.249.90.104 eth0:1 66.249.90.105 eth0:2 66.249.90.106 eth0:3 66.249.90.107 eth0:4 66.249.90.108 I run apache+mod_proxy (single apache instance) which binds to all interfaces, but no matter which address I connect to use the forwarding proxy, all traffic goes out to the internet as 66.249.90.104 I have also tried running 5 different apaches, each binding to its own interface only, but that still sends the outbound request through 66.249.90.104. I was hoping to get it to work as follows: I connect to 66.249.90.108 and make a proxy request, and it goes out as 66.249.90.108. I connect to 66.249.90.107 and make a proxy request, and it goes out as 66.249.90.107. etc. Has anyone else had to deal with this issue? The fall back solution would be to just run apache on 5 separate boxes, but I would prefer it to all work on one box. Thanks!

    Read the article

  • Access Denied / Server 2008 / Home Directories

    - by Shaun Murphy
    Domain Controller: BDC01 (192.168.9.2) Storage Server: BrightonSAN1 (192.168.9.3) Domain: brighton.local Last night I moved our users home directories off of our Domain Controller onto a storage server using the MS FSMT. I'm getting a mixed bag of errors. The first being some users cannot logon properly, they can't access the logon.vbs in the sysvol folder on the DC and consequently cannot map their drives. I've narrowed that down to a DNS issue as we there was a remnant of our previous DNS server in the DHCP server options and scope options. I'm able to get their drives remapped by browsing to the sysvol folder by IP address as opposed to Computer Name and manually running the logon.vbs script. The other error I'm getting is Access Denied on a few of the users home directories. The top level folder (Home) is shared as normal and I've removed and re-added the NTFS security a number of times now including making the user the owner with full control. I've checked each and every individual file and folder in said users home directory and they are indeed the owner but I'm unable to write but I can read the contents. I'm stumped. This isn't happening to all clients. I'm considering removing their AD accounts, backing up their folders and readding them as a last resort but obviously I'd like to know why the above errors are happening.

    Read the article

  • Files built with a makefile are disapearing (including the binary)

    - by Reid
    I am building a program on a TS-7800(SBC), and when I run make (show below), it appears to go through all of the steps normally, but in the end i do not get a binary file. Why is this, and how can I get my file. makefile CC= /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc # compiler options #CFLAGS= -O2 CFLAGS= -mcpu=arm9 #CFLAGS= -pg -Wall # linker LN= $(CC) # linker options LNFLAGS= #LNFLAGS= -pg # extra libraries used in linking (use -l command) LDLIBS= -lpthread # source files SOURCES= HMITelem.c Cpacket.c GPS.c ADC.c Wireless.c Receivers.c CSVReader.c RPM.c RS485.c # include files INCLUDES= Cpacket.h HMITelem.h CSVReader.h RS485.h # object files OBJECTS= HMITelem.o Cpacket.o GPS.o ADC.o Wireless.o Receivers.o CSVReader.o RPM.o RS485.o HMITelem: $(OBJECTS) $(LN) $(LNFLAGS) -o $@ $(OBJECTS) $(LDLIBS) .c.o: $*.c $(CC) $(CFLAGS) -c $*.c RUN : ./HMITelem #clean: # rm -f *.o # rm -f *~ Output root@ts7800:ReidTest# make /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c HMITelem.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c Cpacket.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c GPS.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c ADC.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c Wireless.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c Receivers.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c CSVReader.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c RPM.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -mcpu=arm9 -c RS485.c /home/eclipse/ReidTest/cc/cross-toolchains/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -o HMITelem HMITelem.o Cpacket.o GPS.o ADC.o Wireless.o Receivers.o CSVReader.o RPM.o RS485.o -lpthread Thank you.

    Read the article

  • What keeps you from changing your public IP address and wreak havok?

    - by Whitemage
    An interesting question was asked to me and I did not know what to answer.. So I'll ask here. Let's say I subscribed to an ISP and I'm using cable internet access. ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let's say, 60.61.62.75 and mess with another consumer's internet access? For the sake of this argument, let's say that this other IP address is also owned by the same ISP. Also, let's assume that it's possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gaetway, a network address and a broadcast address. So that's 3 addresses the ISP "loses" to you. That seems very wastefull for dynamically assigned IP addresses where the majority of customers are.. Could they simply be using static arps? ACLs? Other simple mechanisms? Anyone who worked at an ISP would be willing to explain this a bit?

    Read the article

  • Can't login via ssh after upgrading to Ubuntu 12.10

    - by user42899
    I have an Ubuntu 12.04LTS instance on AWS EC2 and I upgraded it to 12.10 following the instructions at https://help.ubuntu.com/community/QuantalUpgrades. After upgrading I can no longer ssh into my VM. It isn't accepting my ssh key and my password is also rejected. The VM is running, reachable, and SSH is started. The problem seems to be about the authentication part. SSH has been the only way for me to access that VM. What are my options? ubuntu@alice:~$ ssh -v -i .ssh/sos.pem [email protected] OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /home/ubuntu/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to www.hostname.com [37.37.37.37] port 22. debug1: Connection established. debug1: identity file .ssh/sos.pem type -1 debug1: identity file .ssh/sos.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: RSA 33:33:33:33:33:33:33:33:33:33:33:33:33:33 debug1: Host '[www.hostname.com]:22' is known and matches the RSA host key. debug1: Found key in /home/ubuntu/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: .ssh/sos.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again.

    Read the article

  • ssh connection slow when using @hostname.com but now when using @ipaddress

    - by Alex Recarey
    When connecting to a Debian server using ssh, if I use [email protected] (the IP address of hte server) the connection is instant. If however I use [email protected] (a DNS redirected to the IP address of the server) the ssh connection hangs for a 20 seconds before connecting successfully. The ssh logs show the following: [alex@alex home]$ ssh -v -v [email protected] OpenSSH_5.5p1, OpenSSL 1.0.0c-fips 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 and here it hangs during 20 seconds before continuing. I think it might have something to do with reverse DNS or similar (the server does not really "know" it's name is hostname.com, it just has that DNS rediriected to its IP address). I have added the following options to /etc/ssh/sshd_config: UseDNS no GSSAPIAuthentication no to no effect. The server's DNS records in /etc/resolv.conf are configured correctly: ping hostname.com PING sub.domain.com (X.X.X.X) 56(84) bytes of data. 64 bytes from replicant (X.X.X.X): icmp_seq=1 ttl=64 time=0.029 ms 64 bytes from replicant (X.X.X.X): icmp_seq=2 ttl=64 time=0.050 ms?s Thanks for the help. Solution: It seems the DSL router my ISP saddled me with was causing the trouble. Changing my DNS server from 192.168.1.1 (router's IP) to google's (8.8.8.8, always good to know when you are in a hurry) instantly solved the connection delay problem. I am guessing that the 50€ router provided does not cache DNS entries, although I don't understand why pinging the DNS address had no delay, and 20 seconds is too long of a wait, even for uncached DNS. Tnanks again for the help!

    Read the article

  • BGP Multipath & return routes

    - by Dennis van der Stelt
    I'm probably a complete n00b concerning serverfault related questions, but our IT department makes a bold statement I wish to verify. I've searched the internet, but can find nothing related to my question, so I come here. We have Threat Management Gateway 2010 and we used to just route the request to IIS and it contained the ip address so we could see where it was coming from. But now they turned on "Requests apear to come the TMG server" so ip addresses aren't forwarded anymore. Every request has the ip of the TMG server. Now the idea behind this is that because of multipath bgp routes, the incoming request goes over RouteA, but the acknowledgement messages could return over RouteB. The claim is that because the request doesn't come from the first known source, our proxy, but instead from IIS, some smart routers at the visitor of our websites don't recognize the acknowledgement message and filter it out. In other words, the response never arrives. Again, this is the claim. But I cannot find ANY resources on the internet that support this claim. I do read about bgp multipath, but more in the case that there are alternative routes when the fastest route fails for some reason. So is the claim completely bogus or is there (some) truth to it? Can someone explain or point me to resources? Thanks in advance!

    Read the article

  • mod_rewrite "Request exceeded the limit of 10 internal redirects due to probable configuration error."

    - by Shoaibi
    What i want: Force www [works] Restrict access to .inc.php [works] Force redirection of abc.php to /abc/ Removal of extension from url Add a trailing slash if needed old .htaccess : Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteRule ^(.*)/$ /$1.php [L,R=301] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.example.net/$1/ [R=301,L] </IfModule> New .htaccess: Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteCond %{REQUEST_FILENAME} \.php$ RewriteCond %{REQUEST_FILENAME} -f RewriteRule (.*)\.php$ /$1/ [L,R=301] #### Map pseudo-directory to PHP file RewriteCond %{REQUEST_FILENAME}\.php -f RewriteRule (.*) /$1.php [L] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule (.*) $1/ [L,R=301] </IfModule> errorlog: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://www.example.net/ Rewrite.log: http://pastebin.com/x5PKeJHB

    Read the article

< Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >