Search Results

Search found 15 results on 1 pages for 'udo'.

Page 1/1 | 1 

  • insserv: Script <SCRIPT_NAME> is broken: missing end of LSB comment.

    - by udo
    I am getting this error when running: insserv -r udo-startup.sh insserv: Script udo-startup.sh is broken: missing end of LSB comment. insserv: exiting now! The content of udo-startup.sh is this: #!/bin/bash ### BEGIN INIT INFO # Provides: udo-startup.sh # Required-Start: $local_fs $remote_fs $network $syslog # Required-Stop: $local_fs $remote_fs $network $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: - # Description: - ### END INIT INF ID=$(xinput list | grep -i touchpad | sed '/TouchPad/s/^.*id=\([0-9]*\).*$/\1/') xinput set-prop $ID "Device Enabled" 0 exit 0

    Read the article

  • Configure nginx for multiple node.js apps with own domains

    - by udo
    I have a node webapp up and running with my nginx on debian squeeze. Now I want to add another one with an own domain but when I do so, only the first app is served and even if I go to the second domain I simply get redirected to the first webapp. Hope you see what I did wrong here: example1.conf: upstream example1.com { server 127.0.0.1:3000; } server { listen 80; server_name www.example1.com; rewrite ^/(.*) http://example1.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example1.com; access_log /var/log/nginx/example1.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example1.com; proxy_redirect off; } } example2.conf: upstream example2.com { server 127.0.0.1:1111; } server { listen 80; server_name www.example2.com; rewrite ^/(.*) http://example2.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example2.com; access_log /var/log/nginx/example2.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example2.com; proxy_redirect off; } } curl simply does this: zazzl:Desktop udo$ curl -I http://example2.com/ HTTP/1.1 301 Moved Permanently Server: nginx/1.2.2 Date: Sat, 04 Aug 2012 13:46:30 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: http://example1.com/ Thanks :)

    Read the article

  • Changes to the LINQ-to-StreamInsight Dialect

    - by Roman Schindlauer
    In previous versions of StreamInsight (1.0 through 2.0), CepStream<> represents temporal streams of many varieties: Streams with ‘open’ inputs (e.g., those defined and composed over CepStream<T>.Create(string streamName) Streams with ‘partially bound’ inputs (e.g., those defined and composed over CepStream<T>.Create(Type adapterFactory, …)) Streams with fully bound inputs (e.g., those defined and composed over To*Stream – sequences or DQC) The stream may be embedded (where Server.Create is used) The stream may be remote (where Server.Connect is used) When adding support for new programming primitives in StreamInsight 2.1, we faced a choice: Add a fourth variety (use CepStream<> to represent streams that are bound the new programming model constructs), or introduce a separate type that represents temporal streams in the new user model. We opted for the latter. Introducing a new type has the effect of reducing the number of (confusing) runtime failures due to inappropriate uses of CepStream<> instances in the incorrect context. The new types are: IStreamable<>, which logically represents a temporal stream. IQStreamable<> : IStreamable<>, which represents a queryable temporal stream. Its relationship to IStreamable<> is analogous to the relationship of IQueryable<> to IEnumerable<>. The developer can compose temporal queries over remote stream sources using this type. The syntax of temporal queries composed over IQStreamable<> is mostly consistent with the syntax of our existing CepStream<>-based LINQ provider. However, we have taken the opportunity to refine certain aspects of the language surface. Differences are outlined below. Because 2.1 introduces new types to represent temporal queries, the changes outlined in this post do no impact existing StreamInsight applications using the existing types! SelectMany StreamInsight does not support the SelectMany operator in its usual form (which is analogous to SQL’s “CROSS APPLY” operator): static IEnumerable<R> SelectMany<T, R>(this IEnumerable<T> source, Func<T, IEnumerable<R>> collectionSelector) It instead uses SelectMany as a convenient syntactic representation of an inner join. The parameter to the selector function is thus unavailable. Because the parameter isn’t supported, its type in StreamInsight 1.0 – 2.0 wasn’t carefully scrutinized. Unfortunately, the type chosen for the parameter is nonsensical to LINQ programmers: static CepStream<R> SelectMany<T, R>(this CepStream<T> source, Expression<Func<CepStream<T>, CepStream<R>>> streamSelector) Using Unit as the type for the parameter accurately reflects the StreamInsight’s capabilities: static IQStreamable<R> SelectMany<T, R>(this IQStreamable<T> source, Expression<Func<Unit, IQStreamable<R>>> streamSelector) For queries that succeed – that is, queries that do not reference the stream selector parameter – there is no difference between the code written for the two overloads: from x in xs from y in ys select f(x, y) Top-K The Take operator used in StreamInsight causes confusion for LINQ programmers because it is applied to the (unbounded) stream rather than the (bounded) window, suggesting that the query as a whole will return k rows: (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) The use of SelectMany is also unfortunate in this context because it implies the availability of the window parameter within the remainder of the comprehension. The following compiles but fails at runtime: (from win in xs.SnapshotWindow() from x in win orderby x.A select win).Take(k) The Take operator in 2.1 is applied to the window rather than the stream: Before After (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) from win in xs.SnapshotWindow() from b in     (from x in win     orderby x.A     select x.B).Take(k) select b Multicast We are introducing an explicit multicast operator in order to preserve expression identity, which is important given the semantics about moving code to and from StreamInsight. This also better matches existing LINQ dialects, such as Reactive. This pattern enables expressing multicasting in two ways: Implicit Explicit var ys = from x in xs          where x.A > 1          select x; var zs = from y1 in ys          from y2 in ys.ShiftEventTime(_ => TimeSpan.FromSeconds(1))          select y1 + y2; var ys = from x in xs          where x.A > 1          select x; var zs = ys.Multicast(ys1 =>     from y1 in ys1     from y2 in ys1.ShiftEventTime(_ => TimeSpan.FromSeconds(1))     select y1 + y2; Notice the product translates an expression using implicit multicast into an expression using the explicit multicast operator. The user does not see this translation. Default window policies Only default window policies are supported in the new surface. Other policies can be simulated by using AlterEventLifetime. Before After xs.SnapshotWindow(     WindowInputPolicy.ClipToWindow,     SnapshotWindowInputPolicy.Clip) xs.SnapshotWindow() xs.TumblingWindow(     TimeSpan.FromSeconds(1),     HoppingWindowOutputPolicy.PointAlignToWindowEnd) xs.TumblingWindow(     TimeSpan.FromSeconds(1)) xs.TumblingWindow(     TimeSpan.FromSeconds(1),     HoppingWindowOutputPolicy.ClipToWindowEnd) Not supported … LeftAntiJoin Representation of LASJ as a correlated sub-query in the LINQ surface is problematic as the StreamInsight engine does not support correlated sub-queries (see discussion of SelectMany). The current syntax requires the introduction of an otherwise unsupported ‘IsEmpty()’ operator. As a result, the pattern is not discoverable and implies capabilities not present in the server. The direct representation of LASJ is used instead: Before After from x in xs where     (from y in ys     where x.A > y.B     select y).IsEmpty() select x xs.LeftAntiJoin(ys, (x, y) => x.A > y.B) from x in xs where     (from y in ys     where x.A == y.B     select y).IsEmpty() select x xs.LeftAntiJoin(ys, x => x.A, y => y.B) ApplyWithUnion The ApplyWithUnion methods have been deprecated since their signatures are redundant given the standard SelectMany overloads: Before After xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count()) xs.GroupBy(x => x.A).SelectMany(     gs =>     from win in gs.SnapshotWindow()     select win.Count()) xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count(), r => new { r.Key, Count = r.Payload }) from x in xs group x by x.A into gs from win in gs.SnapshotWindow() select new { gs.Key, Count = win.Count() } Alternate UDO syntax The representation of UDOs in the StreamInsight LINQ dialect confuses cardinalities. Based on the semantics of user-defined operators in StreamInsight, one would expect to construct queries in the following form: from win in xs.SnapshotWindow() from y in MyUdo(win) select y Instead, the UDO proxy method is referenced within a projection, and the (many) results returned by the user code are automatically flattened into a stream: from win in xs.SnapshotWindow() select MyUdo(win) The “many-or-one” confusion is exemplified by the following example that compiles but fails at runtime: from win in xs.SnapshotWindow() select MyUdo(win) + win.Count() The above query must fail because the UDO is in fact returning many values per window while the count aggregate is returning one. Original syntax New alternate syntax from win in xs.SnapshotWindow() select win.UdoProxy(1) from win in xs.SnapshotWindow() from y in win.UserDefinedOperator(() => new Udo(1)) select y -or- from win in xs.SnapshotWindow() from y in win.UdoMacro(1) select y Notice that this formulation also sidesteps the dynamic type pitfalls of the existing “proxy method” approach to UDOs, in which the type of the UDO implementation (TInput, TOuput) and the type of its constructor arguments (TConfig) need to align in a precise and non-obvious way with the argument and return types for the corresponding proxy method. UDSO syntax UDSO currently leverages the DataContractSerializer to clone initial state for logical instances of the user operator. Initial state will instead be described by an expression in the new LINQ surface. Before After xs.Scan(new Udso()) xs.Scan(() => new Udso()) Name changes ShiftEventTime => AlterEventStartTime: The alter event lifetime overload taking a new start time value has been renamed. CountByStartTimeWindow => CountWindow

    Read the article

  • Changes to the LINQ-to-StreamInsight Dialect

    - by Roman Schindlauer
    In previous versions of StreamInsight (1.0 through 2.0), CepStream<> represents temporal streams of many varieties: Streams with ‘open’ inputs (e.g., those defined and composed over CepStream<T>.Create(string streamName) Streams with ‘partially bound’ inputs (e.g., those defined and composed over CepStream<T>.Create(Type adapterFactory, …)) Streams with fully bound inputs (e.g., those defined and composed over To*Stream – sequences or DQC) The stream may be embedded (where Server.Create is used) The stream may be remote (where Server.Connect is used) When adding support for new programming primitives in StreamInsight 2.1, we faced a choice: Add a fourth variety (use CepStream<> to represent streams that are bound the new programming model constructs), or introduce a separate type that represents temporal streams in the new user model. We opted for the latter. Introducing a new type has the effect of reducing the number of (confusing) runtime failures due to inappropriate uses of CepStream<> instances in the incorrect context. The new types are: IStreamable<>, which logically represents a temporal stream. IQStreamable<> : IStreamable<>, which represents a queryable temporal stream. Its relationship to IStreamable<> is analogous to the relationship of IQueryable<> to IEnumerable<>. The developer can compose temporal queries over remote stream sources using this type. The syntax of temporal queries composed over IQStreamable<> is mostly consistent with the syntax of our existing CepStream<>-based LINQ provider. However, we have taken the opportunity to refine certain aspects of the language surface. Differences are outlined below. Because 2.1 introduces new types to represent temporal queries, the changes outlined in this post do no impact existing StreamInsight applications using the existing types! SelectMany StreamInsight does not support the SelectMany operator in its usual form (which is analogous to SQL’s “CROSS APPLY” operator): static IEnumerable<R> SelectMany<T, R>(this IEnumerable<T> source, Func<T, IEnumerable<R>> collectionSelector) It instead uses SelectMany as a convenient syntactic representation of an inner join. The parameter to the selector function is thus unavailable. Because the parameter isn’t supported, its type in StreamInsight 1.0 – 2.0 wasn’t carefully scrutinized. Unfortunately, the type chosen for the parameter is nonsensical to LINQ programmers: static CepStream<R> SelectMany<T, R>(this CepStream<T> source, Expression<Func<CepStream<T>, CepStream<R>>> streamSelector) Using Unit as the type for the parameter accurately reflects the StreamInsight’s capabilities: static IQStreamable<R> SelectMany<T, R>(this IQStreamable<T> source, Expression<Func<Unit, IQStreamable<R>>> streamSelector) For queries that succeed – that is, queries that do not reference the stream selector parameter – there is no difference between the code written for the two overloads: from x in xs from y in ys select f(x, y) Top-K The Take operator used in StreamInsight causes confusion for LINQ programmers because it is applied to the (unbounded) stream rather than the (bounded) window, suggesting that the query as a whole will return k rows: (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) The use of SelectMany is also unfortunate in this context because it implies the availability of the window parameter within the remainder of the comprehension. The following compiles but fails at runtime: (from win in xs.SnapshotWindow() from x in win orderby x.A select win).Take(k) The Take operator in 2.1 is applied to the window rather than the stream: Before After (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) from win in xs.SnapshotWindow() from b in     (from x in win     orderby x.A     select x.B).Take(k) select b Multicast We are introducing an explicit multicast operator in order to preserve expression identity, which is important given the semantics about moving code to and from StreamInsight. This also better matches existing LINQ dialects, such as Reactive. This pattern enables expressing multicasting in two ways: Implicit Explicit var ys = from x in xs          where x.A > 1          select x; var zs = from y1 in ys          from y2 in ys.ShiftEventTime(_ => TimeSpan.FromSeconds(1))          select y1 + y2; var ys = from x in xs          where x.A > 1          select x; var zs = ys.Multicast(ys1 =>     from y1 in ys1     from y2 in ys1.ShiftEventTime(_ => TimeSpan.FromSeconds(1))     select y1 + y2; Notice the product translates an expression using implicit multicast into an expression using the explicit multicast operator. The user does not see this translation. Default window policies Only default window policies are supported in the new surface. Other policies can be simulated by using AlterEventLifetime. Before After xs.SnapshotWindow(     WindowInputPolicy.ClipToWindow,     SnapshotWindowInputPolicy.Clip) xs.SnapshotWindow() xs.TumblingWindow(     TimeSpan.FromSeconds(1),     HoppingWindowOutputPolicy.PointAlignToWindowEnd) xs.TumblingWindow(     TimeSpan.FromSeconds(1)) xs.TumblingWindow(     TimeSpan.FromSeconds(1),     HoppingWindowOutputPolicy.ClipToWindowEnd) Not supported … LeftAntiJoin Representation of LASJ as a correlated sub-query in the LINQ surface is problematic as the StreamInsight engine does not support correlated sub-queries (see discussion of SelectMany). The current syntax requires the introduction of an otherwise unsupported ‘IsEmpty()’ operator. As a result, the pattern is not discoverable and implies capabilities not present in the server. The direct representation of LASJ is used instead: Before After from x in xs where     (from y in ys     where x.A > y.B     select y).IsEmpty() select x xs.LeftAntiJoin(ys, (x, y) => x.A > y.B) from x in xs where     (from y in ys     where x.A == y.B     select y).IsEmpty() select x xs.LeftAntiJoin(ys, x => x.A, y => y.B) ApplyWithUnion The ApplyWithUnion methods have been deprecated since their signatures are redundant given the standard SelectMany overloads: Before After xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count()) xs.GroupBy(x => x.A).SelectMany(     gs =>     from win in gs.SnapshotWindow()     select win.Count()) xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count(), r => new { r.Key, Count = r.Payload }) from x in xs group x by x.A into gs from win in gs.SnapshotWindow() select new { gs.Key, Count = win.Count() } Alternate UDO syntax The representation of UDOs in the StreamInsight LINQ dialect confuses cardinalities. Based on the semantics of user-defined operators in StreamInsight, one would expect to construct queries in the following form: from win in xs.SnapshotWindow() from y in MyUdo(win) select y Instead, the UDO proxy method is referenced within a projection, and the (many) results returned by the user code are automatically flattened into a stream: from win in xs.SnapshotWindow() select MyUdo(win) The “many-or-one” confusion is exemplified by the following example that compiles but fails at runtime: from win in xs.SnapshotWindow() select MyUdo(win) + win.Count() The above query must fail because the UDO is in fact returning many values per window while the count aggregate is returning one. Original syntax New alternate syntax from win in xs.SnapshotWindow() select win.UdoProxy(1) from win in xs.SnapshotWindow() from y in win.UserDefinedOperator(() => new Udo(1)) select y -or- from win in xs.SnapshotWindow() from y in win.UdoMacro(1) select y Notice that this formulation also sidesteps the dynamic type pitfalls of the existing “proxy method” approach to UDOs, in which the type of the UDO implementation (TInput, TOuput) and the type of its constructor arguments (TConfig) need to align in a precise and non-obvious way with the argument and return types for the corresponding proxy method. UDSO syntax UDSO currently leverages the DataContractSerializer to clone initial state for logical instances of the user operator. Initial state will instead be described by an expression in the new LINQ surface. Before After xs.Scan(new Udso()) xs.Scan(() => new Udso()) Name changes ShiftEventTime => AlterEventStartTime: The alter event lifetime overload taking a new start time value has been renamed. CountByStartTimeWindow => CountWindow

    Read the article

  • How to exclude a folder in svn checkout in maven?

    - by Udo Fholl
    Hi all, Im using maven to checkout some projects. I don't want maven to checkout a folder. But it seems to ignore the excludes tag in configuration. This is the svn structure: trunk/ | L_ folder_to_include | L_ folder_to_ignore And here it goes a sample of the pom.xml: <execution> <id>checkout_application</id> <configuration> <connectionUrl>hostname</connectionUrl> <checkoutDirectory>checkout_folder</checkoutDirectory> <excludes>folder_to_ignore</excludes> </configuration> <phase>process-resources</phase> <goals> <goal>checkout</goal> </goals> </execution> Sorry for the poor formatting and my english. I wasn't able to insert proper tabulation (four spaces?). Thank you! Udo.

    Read the article

  • bind: blackhole for invalid recursive queries?

    - by Udo G
    I have a name server that's publicly accessible since it is the authoritative name server for a couple of domains. Currently the server is flooded with faked type ANY requests for isc.org, ripe.net and similar (that's a known distributed DoS attack). The server runs BIND and has allow-recursion set to my LAN so that these requests are rejected. In such cases the server responds just with authority and additional sections referring the root servers. Can I configure BIND so that it completely ignores these requests, without sending a response at all?

    Read the article

  • dpkg: error processing /var/cache/apt/archives/python2.6-minimal_2.6.6-5ubuntu1_i386.deb (--unpack)

    - by udo
    I had an issue (Question 199582) which was resolved. Unfortunately I am stuck at this point now. Running root@X100e:/var/cache/apt/archives# apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following NEW packages will be installed: file libexpat1 libmagic1 libreadline6 libsqlite3-0 mime-support python python-minimal python2.6 python2.6-minimal readline-common 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/5,204kB of archives. After this operation, 19.7MB of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 6108 files and directories currently installed.) Unpacking python2.6-minimal (from .../python2.6-minimal_2.6.6-5ubuntu1_i386.deb) ... new installation of python2.6-minimal; /usr/lib/python2.6/site-packages is a directory which is expected a symlink to /usr/local/lib/python2.6/dist-packages. please find the package shipping files in /usr/lib/python2.6/site-packages and file a bug report to ship these in /usr/lib/python2.6/dist-packages instead aborting installation of python2.6-minimal dpkg: error processing /var/cache/apt/archives/python2.6-minimal_2.6.6-5ubuntu1_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/python2.6-minimal_2.6.6-5ubuntu1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) results in above error. Running root@X100e:/var/cache/apt/archives# dpkg -i python2.6-minimal_2.6.6-5ubuntu1_i386.deb (Reading database ... 6108 files and directories currently installed.) Unpacking python2.6-minimal (from python2.6-minimal_2.6.6-5ubuntu1_i386.deb) ... new installation of python2.6-minimal; /usr/lib/python2.6/site-packages is a directory which is expected a symlink to /usr/local/lib/python2.6/dist-packages. please find the package shipping files in /usr/lib/python2.6/site-packages and file a bug report to ship these in /usr/lib/python2.6/dist-packages instead aborting installation of python2.6-minimal dpkg: error processing python2.6-minimal_2.6.6-5ubuntu1_i386.deb (--install): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: python2.6-minimal_2.6.6-5ubuntu1_i386.deb results in above error. Running root@X100e:/var/cache/apt/archives# dpkg -i --force-depends python2.6-minimal_2.6.6-5ubuntu1_i386.deb (Reading database ... 6108 files and directories currently installed.) Unpacking python2.6-minimal (from python2.6-minimal_2.6.6-5ubuntu1_i386.deb) ... new installation of python2.6-minimal; /usr/lib/python2.6/site-packages is a directory which is expected a symlink to /usr/local/lib/python2.6/dist-packages. please find the package shipping files in /usr/lib/python2.6/site-packages and file a bug report to ship these in /usr/lib/python2.6/dist-packages instead aborting installation of python2.6-minimal dpkg: error processing python2.6-minimal_2.6.6-5ubuntu1_i386.deb (--install): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: python2.6-minimal_2.6.6-5ubuntu1_i386.deb is not able to fix this. Any clues how to fix this?

    Read the article

  • How to execute an update via SQLQuery in Hibernate

    - by Udo Fholl
    Hi, I need to update a joined sub-class. Since Hibernate doesn't allow to update joined sub-classes in hql or named-query I want to do it via SQL. I also can't use a sql named-query because updates via named-query are not supported in Hibernate. So I decided to use a SQLQuery. But Hibernate complaints about not calling addScalar(). Are updates returning the number of rows affected and how is named that column? Are there any other ways to do an update on a joined sub-class in hibernate? Thanks in advance!

    Read the article

  • maven scm plugin deleting output folder in every execution

    - by Udo Fholl
    Hi all, I need to download from 2 different svn locations to the same output directory. So i configured 2 different executions. But every time it executes a checkout deletes the output directory so it also deletes the already downloaded projects. Here is a sample of my pom.xml: <profiles> <profile> <id>checkout</id> <activation> <property> <name>checkout</name> <value>true</value> </property> </activation> <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-scm-plugin</artifactId> <version>1.3</version> <configuration> <username>${svn.username}</username> <password>${svn.pass}</password> <checkoutDirectory>${path}</checkoutDirectory> <skipCheckoutIfExists /> </configuration> <executions> <execution> <id>checkout_a</id> <configuration> <connectionUrl>scm:svn:https://host_n/folder</connectionUrl> <checkoutDirectory>${path}</checkoutDirectory> </configuration> <phase>process-resources</phase> <goals> <goal>checkout</goal> </goals> </execution> <execution> <id>checkout_b</id> <configuration> <connectionUrl>scm:svn:https://host_l/anotherfolder</connectionUrl> <checkoutDirectory>${path}</checkoutDirectory> </configuration> <phase>process-resources</phase> <goals> <goal>checkout</goal> </goals> </execution> </executions> </plugin> </plugins> </build> </profile> Is there any way to prevent the executions to delete the folder ${path} ? Thank you. PS: I cant format the pom.xml fragment correctly, sorry!

    Read the article

  • Fill object data from several tables using hibernate mapping

    - by Udo Fholl
    Hi all, I'd like to know if it is possible to fill up a class data from database using the hibernate hbm (mapping). For instance: public class someClass { List<OtherClass> otherClasses; List<YetAnotherClass> yetAnotherClasses; //Constructors ? class OtherClass { String name; //setters, getters } class YetAnotherClass { String name; //setters, getters } //setters, getters } Using an hbm can I fill in the data from tables OTHER_CLASS_TABLE and YET_ANOTHER_CLASS_TABLE? I have no such SOME_CLASS_TABLE since this info is for viewing only. I've been playing with the <join table=""><subselect> and different constructors... But it is not working Thanks! Sorry for my english!

    Read the article

  • Catching Oracle Errors in Django

    - by Dashdrum
    My Django app runs on an Oracle database. A few times a year, the database is unavailable because of a scheduled process or unplanned downtime. However, I can't see how to catch the error a give a useful message back to the requester. Instead, a 500 error is triggered, and I get an email (or hundreds) showing the exception. One example is: File "/opt/UDO/env/events/lib/python2.6/site-packages/django/db/backends/oracle/base.py", line 447, in _cursor self.connection = Database.connect(conn_string, **conn_params) DatabaseError: ORA-01035: ORACLE only available to users with RESTRICTED SESSION privilege I see a similar error with a different ORA number when the DB is down. Because the exception is thrown deep within the Django libraries, and can be triggered by any of my views or the built in admin views, I don't know where any exception trapping code would go. Any suggestions?

    Read the article

  • Grub rescue - error: unknown filesystem

    - by user53817
    I have a multiboot system set up. The system has three drives. Multiboot is configured with Windows XP, Windows 7, and Ubuntu - all on the first drive. I had a lot of unpartitioned space left on the drive and was reserving it for adding other OSes and for storing files there in the future. One day I went ahead and downloaded Partition Wizard and created a logical NTFS partition from within Windows 7, still some unpartitioned space left over. Everything worked fine, until I rebooted the computer a few days later. Now I'm getting: error: unknown filesystem. grub rescue First of all I was surprised not to find any kind of help command, by trying: help, ?, man, --help, -h, bash, cmd, etc. Now I'm stuck with non-bootable system. I have started researching the issue and finding that people usually recommend to boot to a Live CD and fix the issue from there. Is there a way to fix this issue from within grub rescue without the need for Live CD? UPDATE By following the steps from persist commands typed to grub rescue, I was able to boot to initramfs prompt. But not anywhere further than that. So far from reading the manual on grub rescue, I was able to see my drives and partitions using ls command. For the first hard drive I see the following: (hd0) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) I now know that (hd0,msdos6) contains Linux on it, since ls (hd0,msdos6)/ lists directories. Others will give "error: unknown filesystem." UPDATE 2 After the following commands I am now getting to the boot menu and can boot into Windows 7 and Ubuntu, but upon reboot I have to repeat these steps. ls ls (hd0,msdos6)/ set root=(hd0,msdos6) ls / set prefix=(hd0,msdos6)/boot/grub insmod /boot/grub/linux.mod normal UPDATE 3 Thanks Shashank Singh, with your instructions I have simplified my steps to the following. I have learned from you that I can replace msdos6 with just a 6 and that I can just do insmod normal instead of insmod /boot/grub/linux.mod. Now I just need to figure out how to save this settings from within grub itself, without booting into any OS. set root=(hd0,6) set prefix=(hd0,6)/boot/grub insmod normal normal UPDATE 4 Well, it seems like it is a requirement to boot into Linux. After booting into Ubuntu I have performed the following steps described in the manual: sudo update-grub udo grub-install /dev/sda This did not resolve the issue. I still get the grub rescue prompt. What do I need to do to permanently fix it? I have also learned that drive numbers as in hd0 need to be translated to drive letters as in /dev/sda for some commands. hd1 would be sdb, hd2 would be sdc, and so on. Partitions listed in grub as (hd0,msdos6) would be translated to /dev/sda6.

    Read the article

  • CodePlex Daily Summary for Tuesday, April 27, 2010

    CodePlex Daily Summary for Tuesday, April 27, 2010New ProjectsActive Directory User Properties Change: A complete application in VS 2005 and VB.NET, for Request Request in User Details in Active Directory, with flow to HR and then to IT for approval ...AVR Terminal: A Windows application for connecting to an AVR via RS232 serial or USB-to-COM FTDI ports. Works on Arduino, Bare Bones Board, and any custom board...Battle Droids: AVR-based Network Combat!: A Battle Droid is an AVR® microcontroller running the BattleDroid firmware. This firmware turns your AVR into a lean, mean, fighting machine, and ...Camp Foundation: Camp Foundationchakma: chakma is a question - answer based web application to make people get questions from anybody around the world and being able to answer them. c...Document.Editor: Document.Editor is a multitab text editor for Windows. It includes plain and rich text format support, multi tab interface so you can edit multiple...Dot Net Marche Music Store Demo Application: This is a demo application that the DotNetMarche user gorup (www.dotnetmarche.org) use to make experiments and prepare demos for our workshopselivators: a monitor which enables the user to view the movement of the elivators in a buildingExtended SSIS Package Execute: The SSIS package execute task is flawed as it does not support passing variables. Here we have a custom task that will pass items in a dataflow as...File tools: File toolsFileExplorer.NET: FileExplorer.NET is a .net usercontrol which tries to mimic the Windows FileExplorer treeview.Kazuku: ASP.NET MVC 2 Content Management SystemKSharp Ajax Control Toolkit Library: Built ontop of the Microsoft ASP.NET Ajax Control Toolkit, this library offers enhanced versions of the controls found in the Ajax Control Toolkit....Nitrous - An Aspx ViewEngine for ASP.NET MVC: Near drop-in replacement ASP.NET ViewEngine for MVC.Open Data Protocol - Client Libraries: This is an Open Source release of the .NET and Silverlight Client Libraries for the Open Data Protocol (OData). For more information on odata, see ...ORAYLIS BI.SmartDiff: BI.SmartDiff is a helper to connect the functionality of BIDS Helper – SmartDiff to TortoiseSVN. BIDS Helper – SmartDiff helps you to get more read...RicciWebSiteSystem: soon websiteSynapse:Silverlight A Simple Silverlight Framework: Synapse:Silverlight is a simplified framework for Silverlight. It's purpose is to help developers and designers produce basic LOB solutions that do...TestProjectMB: Testing Team Foundation ServerThoughtWorks Cruise Notification Interceptor: Cruise notification interceptorThreadSafeControls: ThreadSafeControls is a C# project that greatly simplifies the process of transitioning Windows Forms applications to a multithreaded environment b...Unscrambler: Unscrambler is a multitouch WPF word game built with MVVM Light in order to show how to use the touch maniupation and inertia features included in ...Web Utilities: web utilitiesNew Releases7zbackup - PowerShell Script to Backup Files with 7zip: 7zBackup v. 1.7.1 Stable: Bug Solved : Presence of junction.exe is wrongly referred to 7z.exeAVR Terminal: AVR Terminal v0.2: Here is an Alpha-almost-BETA release of the AVR Terminal. That being said, I use it almost daily and it shouldn't break anything on your system, b...Bistro FSharp Extensions: 0.9.7.0: This is the VS 2010 release of BistroFS extensions. This release focused on usability, adding key functionality such as resource aliasing and secur...Bojinx: Bojinx Dialog Management V1.0: Stable release of the Bojinx Dialog Management library.BOWIE: BOWIE 2010: This new version works on Outlook 2007/2010 and TFS 2008/2010 RTM. Details about all features in this version on the Home Page : http://bowie.code...Catharsis: Catharsis 2.5 on catarsa.com: The Catharsis framework has finally its own portal http://catarsa.com Example - documented steps to create Web-Application http://catarsa.com/Arti...Colorful Expression: Expression Blend 3: Alpha Version, Read Issues and Installing! Colorful Expression is an add-in for Expression Blend and Expression Design that brings you the Adobe K...Colorful Expression: Expression Blend 4: Read Issues and Installing! Colorful Expression is an add-in for Expression Blend and Expression Design that brings you the Adobe Kuler and ColorLo...Courier: Version 1.0: This release includes integration with the Reactive Framework for more elegant message handling and allowing more succinct client code. Full suite...CRM 4.0 Contract Utilities: Release 1.0: Project Description List of Contract Utilities (i.e. custom workflow actions) 1. Change contract status from Active to Draft 2. Copy Contract (with...Document.Editor: 0.9.0: Whats New?: New icon set Bug fix'sDotNetNuke® Blog: 04.00.00: Minimum Required DNN Version: 4.06.02General Code organization * Converted project to .NET 3.5 * Converted solution to Visual Stud...EPiAbstractions: EPiAbstractions 1.2: Updated for EPiServer CMS 6. Only features abstractions for EPiServer CMS. For abstractions for EPiServer.Common and EPiServer.Community use versio...Fluent ViewModel Configuration for WPF (MVVM): FluentViewModel Alpha2: Added support for view model validation using FluentValidation (http://fluentvalidation.codeplex.com/) Fixed exception from Blend while in design...GArphics: Beta v0.9: Beta v0.9. Practically all of the planned features have been implemented and are available to the users. For the version 1.0 mainly just some minor...HTML Ruby: 6.22.2.1: Fixed a bug where HTML Ruby's options window will generate entries in the error log when applying option changes (regression from 6.21.8)HTML Ruby: 6.22.3: Add/remove stop spacing event listener as needed for possible fix to 4620iTuner - The iTunes Companion: iTuner 1.2.3768 Beta 3b: Beta 3 requires iTunes 9.1.0.79 or later A Librarian status panel showing active and queued Librarian scanners. This will be hidden behind the "bi...LiveUpload to Facebook: LiveUpload to Facebook 3.2.3: Version 3.2.3Become a fan on Facebook! Features Quickly and easily upload your photos and videos to Facebook, including any people tags added in W...Maintainance Schedule: Maintenance Scheduler: The first Alpha release of the project.NetSockets: NetSockets (1.2): The NetSockets library (DLL)NSIS Autorun: NSIS Autorun 0.1.2: NSIS Autorun 0.1.1 This release includes source code, application binary, and example materials.OpenSceneGraph glsl samples: OsgGlslSamples Win32 binaries: Project binary release for Windows. The effects shown are: Ambient Occlusion, Depth of Field, DoF with alpha channel, Fire effects, HDR, Light Ma...ORAYLIS BI.SmartDiff: ORAYLIS BI.SmartDiff 0.6.1: First public versionpatterns & practices - Windows Azure Guidance: Code Drop 4 - Content Complete: This release includes documentation and all code samples intended for this first guide. As before, this code release builds on the previous one an...Pex Custom Arithmetic Solver: Custom Solver Package: This is the custom solvers packaged together. To use simply include the dll in your project and add [assembly: PexCustomArithmeticSolver] to your P...PokeIn Comet Ajax Library: PokeIn v08 x86: New FeatureFrom this version forward, PokeIn will define a way between the main page and client side automaticly based to security level. Add "pub...Proxi [Proxy Interface]: Proxi Release 1.0.0.426: Proxi Release 1.0.0.426QuestTracker: QuestTracker 0.3: This release includes recurring quests! Now you can set a quest to uncomplete itself every X minutes, hours, or days! And the quests still retain t...Rensea Image Viewer: RIV 0.4.5: RIV Fix Version. You would need .NET Framework 4.0 to make it run RIVU Improved Version. With separated RIV up-loader, to upload images to Renjian...SCC Switch Provider: Provides a GUI to Switch Source Code Control Provi: Transferred from GotDotNet Workplace. Initial public Release. Downloaded ~922 times from original post.sTASKedit: sTASKedit v0.7a (Alpha): + Fixed: XOR text encoding + Fixed: adding timed rewards missing values + Fixed: occupations in clone()Synapse:Silverlight A Simple Silverlight Framework: Synapse Silverlight Alpha Release: Initial Road-map is being defined.ThoughtWorks Cruise Notification Interceptor: 1.0.0: Initial release.UDC indexes parser: UDC indexex parser Beta 2: Добавлена возможность работать с распределением определителей как если бы генератор был бы LALR(2) То что осталось: Если текстовое дополнение начи...Unscrambler: Release 1.0: Here's the first release of Unscrambler.WinXound: WinXound 3.3.0 Beta 2 for Mac OsX: New: Code Repository (for UDO and personal code) New: Format Code - Added the ability to format only the selected text of the code New: Explore...WPF Inspirational Quote Management System: Release 1.2.2: - Fixed issue some users were having when the application is minimised.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationParticle Plot PivotBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleFarseer Physics EngineIonics Isapi Rewrite FilterN2 CMSDotNetZip Library

    Read the article

1