Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 599/750 | < Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >

• RDP or SSH connection trough Windows 2008 server VPN hang after a while

  - by xt4fs

  I have been experiencing a very strange issue with our VPN setup on Windows Server 2008. That server is running as a Xen Virtual Machine. We use it for two purposes, permit our mobile workers to connect to another server hosted somewhere else that only allow that ip, and use it to RDP or ssh to many other virtual machine on the same server. The server has no performance issue and still a load of memory free. All other virtual machine has no problem whatsoever. Many of those virtual machine have public IP (web servers) and all their firewall are set to allow only ssh connection or RDP connection from their local interface. When I am connecting directly with either ssh or RDP to one of the other virtual machine everything run without any issues. However, when I am doing so through the VPN after some time the connection just hang, it usually continue after some time (5 or 10 minutes). It seems as more there is network usage more often it happen to a point where it is completely unusable. The worst thing I can do to hang it faster is to actually ping the vpn client IP from the local network, after some time the latency increase until it hang. This happen even if I do RDP to the local ip of the VPN server trough the VPN. The server report no problem and if I disconnect to the vpn and reconnect right away everything is alright. There is nothing wrong in the VPN server log. I have taught at the beginning that it could have been an issue with the Host server so I try to RDP,ssh directly to the guest and I have experience no issue while doing this, so it really seems to be a problem with the VPN server on Windows server 2008. Another very weird thing is it does not seems to be of any issue if you only do Internet (NAT) without trying to connect to any local ips.

  Read the article

• Munin graphing by CGI

  - by Vaughn Hawk

  I have Munin working just fine, but any time I try to do cgi graphing - it just stops graphing... no errors in the log, nothing. I've followed the instructions here: http://munin-monitoring.org/wiki/CgiHowto - and it should be working - here's my munin.conf setup, at least the parts that matter: dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin tmpldir /etc/munin/templates graph_strategy cgi cgiurl /usr/lib/cgi-bin cgiurl_graph /cgi-bin/munin-cgi-graph And then the host info yada yada - graph_strategy cgi and cgrurl are commented out in munin.conf - that's because if I uncomment them, graphing stops working. Again, I get no errors in logs, just blank images where the graphs used to be. Comment out cgi? As soon as munin html runs again, everything is back to normal. I'm running the latest version of munin and munin-node - I've tried fastcgi and regular cgi - permissions for all of the directories involved are munin:www-data - and my httpd.conf file looks like this: ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory /usr/lib/cgi-bin/> AllowOverride None SetHandler fastcgi-script Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Location /cgi-bin/munin-cgi-graph> SetHandler fastcgi-script </Location> Does anyone have any ideas? Without this working, at least from what I understand, Munin just graphs stuff, even if no one is looking at them - you add 100 servers to graph, and this starts to become a problem. Hope someone has ran into this and can help me out. Thanks!

  Read the article

• Using public interfaces on a server connected through a GRE tunnel

  - by Evan

  I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

  Read the article

• Troubleshoot dropped wireless connections

  - by Jack

  I was recently hired in the IT department of a small company (~180 users) and one of the issues that people have been complaining about is having their wi-fi connections drop during meetings. The company is using an HP ProCurve Wireless LAN with 10 APs and a controller unit located in the server room. I don't have any experience troubleshooting WLAN in a multi-AP environment, so I'm trying to at least gather information using free or cheap tools. I did a basic site survey using the free version of Ekahau HeatMapper and discovered the following in one of the conference rooms that has been a problem. The program picked up three access points (plus a bunch of others with much lower signals that were out of range): AP 1: SSID: "Unknown SSID" - Signal strength: -48 dBm - -40 dBm. Channel: 2 AP 2: SSID "CompanyMain" - Signal strength: -35 dBm or greater. Channel: 2. Security: WEP (This is the main SSID for the company's WLAN.) AP 3: SSID: "CompanyGuest" - Signal strength: -40 dBm - -35 dBm. Channel: 2. Security: WPA2 (This SSID is the company's "guest" WLAN, which was setup to allow Internet access, but prevent network access.) Is there anything that you see that is clearly a problem from the above? I'm assuming that the unknown SSID might be a big problem, and that it is an AP from a neighboring office that is causing interference. Does that seem likely? Also, regarding channel, should we try changing the channels of our APs to avoid interference with that unknown SSID? (Since everything seems to be on Channel 2?) Should our APs be on different channels? In other words, should the CompanyMain and CompanyGuest APs be on different channels? Finally, any recommendations for free/cheap tools to help me figure this out, and/or a good methodology to follow? Thanks in advance for any help. Jack

  Read the article

• Rewriting html links with modproxyperlhtml

  - by Juancho

  I'm trying to setup an Apache reverse proxy using mod_proxy and modproxyperlhtml. This is my scenario: Domain for the proxy: http : // www.myserver.com/ Destination server (the one behind the proxy): http : // myserver.foo.com/myapp/ I'm sorry that I have to space the URL but serverfault doesn't allow me to post more than two links as "spam protection mechanism" (ridiculous on a site where you ask questions about servers and it's really probable to post more than two times the same URL's to explain your question). The idea is to map http : // www.myserver.com/ to http : // myserver.foo.com/myapp/ . Note that the path on the proxy is / and on the destination server is /myapp/. All of the examples I can find on the net (like the one on the official documentation of modproxyperlhtml) are the other way around, ie. path on the proxy /myapp/ and path on the destination server /. This is my current config that doesn't work: ProxyPass / http : // myserver.foo.com/myapp/ ProxyPassReverse / http : // myserver.foo.com/myapp/ PerlInputFilterHandler Apache2::ModProxyPerlHtml PerlOutputFilterHandler Apache2::ModProxyPerlHtml SetHandler perl-script PerlSetVar ProxyHTMLVerbose "On" LogLevel Info <Location / > # ProxyPassReverse /myapp/ PerlAddVar ProxyHTMLURLMap "/myapp/ /" PerlAddVar ProxyHTMLURLMap "http : // myserver.foo.com /" </Location> The examples use the ProxyPassReverse inside the Location directive, but on my case doesn't work, only when outside. With this configuration the links aren't being replaced as they should be, my guess is that the location isn't being found, thus the rewrite rules aren't being applied. The error log only shows that it uncompresses the content, searches it but doesn't find anything: [Tue Nov 13 0842:05 2012] [warn] [ModProxyPerlHtml] Uncompressing text/html; charset=UTF-8, Content-Encoding: gzip\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Compressing output as Content-Encoding: gzip\n [Tue Nov 13 08:42:06 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n What could be wrong ?

  Read the article

• Storing changes to multiple databases in a single centralized database

  - by B4x

  The setup: multiple MySQL databases at different locations with the same scheme. The databases are in production. The motivation: we want to present information in these databases in a web interface, clearly showing which database the row originated from. We want to be able to get this data from one single source (for different reasons, one of them is pagination which gets tricky if you use multiple sources). The problem: how do we collect data from multiple databases, storing it at a central location and clearly marking the origin of each row? We have discussed using a centralized DB that tracks changes to the production DBs, with the same schema and one additional column for origin. If possible, we would like to avoid having to make changes in the production environment. Since we can't use MySQL's replication (multiple masters to a single slave isn't allowed), what are our other options? Are there any existing solutions for something like this or do we have to code something ourselves? Is the best solution to change the database schemas in production and add a column for origin? The idea of a centralized database isn't set in stone. If there is a solution to this that solves our other problems without a centralized DB, we can be flexible. Any help is much appreciated.

  Read the article

• How to configure networking on an appliance such that it can plug and play on any corporate network?

  - by Joshua Lim

  I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

  Read the article

• Setting up PerformancePoint Services on Sharepoint 2010: connection errors

  - by Rik

  I have tried to setup PerformancePoint Services on SharePoint 2010, but every time I try to use the dashboard designer, I get this error: “An error has occurred attempting to contact the specified SharePoint site” I have tried these steps but it hasn't helped. Any ideas? The event log gives the following information: WebHost failed to process a request. Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/24724999 Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item. --- System.ArgumentException: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item) at System.Collections.Generic.SynchronizedCollection`1.Add(T item) at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses) at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) --- End of inner exception stack trace --- at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) Process Name: w3wp Process ID: 2576

  Read the article

• svn post-commit not performing

  - by davin

  ive been sitting on this for about 7 hours, and ive aged close to 7 years... ahhh, server admin does that to me. i have svn wired through apache2 with webdav in the usual manner (basically like http://www.howtoforge.com/setting-up-subversion-with-webdav-post-commit-hook-and-multiple-sites-on-jaunty-jackalope-ubuntu-9.04). ive had endless problems with this (i didnt on my previous ubuntu server install, although this is ubuntu 10.10): this happened, and was fixed like in the post: http://stackoverflow.com/questions/2547400/how-do-you-fix-an-svn-409-conflict-error this looks like my issue, although its not my solution: http://serverfault.com/questions/135494/apache-svn-on-ubuntu-post-commit-hook-fails-silently-pre-commit-hook-permis my commit to svn works (finally). although the post-commit hook which is supposed to svn update the working copy of the repo on the server, doesn't work. the post-commit hook itself executes, and has sudo permissions (as in the setup url above. testing with whoami somelogfile.log or sudo whoami somelogfile.log shows www-data and root, respectively), although it wont perform the svn update (sudo svn update /var/www/gameServer /var/svn/gameServer.log). similar to the serverfault url above, when i perform the exact command it does update the working copy to the latest revision, just not through the post-commit hook. an age old question that is 90% of the time a permissions issue. but in pure frustration i chmod 777 lots of stuff not to mention the fact that www-data is in /etc/sudoer so it shouldnt even need that. im collapsing in front of the screen partly out of frustration and partly out of sleepiness. any direction would be appreciated.

  Read the article

• Hotmail marking messages as junk

  - by Canadaka

  I was having problems with emails sent from my server being blocked completely by Hotmail, but I found out Hotmail had blocked my IP and by contacting Hotmail I had the block removed. See this question for more info: Email sent from server with rDNS & SPF being blocked by Hotmail But now all emails from my server are going directly to recipients "Junk" folder on hotmail and I can't figure out why. Hotmail says "Microsoft SmartScreen marked this message as junk and we'll delete it after ten days." I tried contacting the same people at Hotmail who had my IP block removed, but I haven't received any reply and its been almost a week. Here are some details: I have a valid SPF record for my domain "v=spf1 a include:_spf.google.com ~all" I have reverse DNS setup I have a Sender Score of 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 I have signed up for Microsoft's SNDS and was approved. My ip says "All of the specified IPs have normal status." Microsoft added my IP to the JMRP Database My IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 my FROM header is being sent in proper format "From: CKA <[email protected]>" Here is a test email source:

  Read the article

• Persistent routes for DD-WRT PPTP VPN client

  - by Tim Kemp

  My home network in the USA is behind a Buffalo router (G300NH) running their version of DD-WRT. I use the built-in PPTP VPN client to connect to a VPN provider in the UK. I route certain traffic over the VPN (so it has a UK source address, for various entirely legal reasons) which I achieved by following the instructions in the DD-WRT docs and my VPN provider's own instructions. I placed two commands like this in the firewall script: route add -net xxx.xxx.0.0 netmask 255.255.0.0 dev ppp0 route add -net yyy.yyy.0.0 netmask 255.255.0.0 dev ppp0 I didn't put any of the iptables rules in since it my setup doesn't seem to need them. It works like a charm. Traffic to the xxx subnets goes over the VPN, everything else goes out over my ISPs own pipes. The problem comes when the VPN drops, which it does occasionally. DD-WRT does a fine job of reconnecting it automatically, but the routes are trashed every time that happens. How do I automate the process of re-establishing my routes? I thought about static routes, but the IP address of the VPN connection is dynamically assigned (which is why I'm using dev ppp0). Many thanks, Tim

  Read the article

• Multi domain on my dedicated server with Apache2

  - by x4vier

  I setup a server with Ubuntu 10.04 server edition. It's works for a long time with a single domain name. Now i want to add another domain wich will pointed to a new directory. I tried to change my Apache2 configuration but it does not seems to work properly. Here is my /etc/apache2/sites-available/default <VirtualHost *:80> DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> <VirtualHost *:80> ServerName mydomain.com ServerAlias www.mydomain.com DocumentRoot /var/www/mydomain </VirtualHost> here is my /etc/hosts 127.0.0.1 localhost **.***.133.29 sd-***.****.fr sd-**** **.***.133.29 mediousgame.com # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ****::0 ip6-localnet ****: :0 ip6-mcastprefix ****::1 ip6-allnodes ****::2 ip6-allrouters ****::3 ip6-allhosts With this configuration when i try to access to mydomain it redirect to the /var/www/ content. Do you have any idea to redirect to the right folder ?

  Read the article

• how do you add an A record for a root domain

  - by nbv4

  this seems really simple, but I can't figure it out. I'm using xname.org since it's free and I own a bunch of domains spread over a few different registrars. The setup I desire is very simple: one A record that points the bare domain name to my server, plus a wildcard CNAME record pointing all subdomains to the same server. So if the user goes to domain.com it will point them to 285.24.435.75, if they go to www.domain, blah.domain.com, or any other sub domain, they'll get sent to 285.24.435.75. All the examples I read on the internet about setting up A records all have the A record set to a subdomain such as www. WWW is deprecated so I want to have noting to do with it. Currently my xname.org zone looks like this: $TTL 86400 ; Default TTL domain.com. IN SOA ns0.xname.org. nbvfour.gmail.com. ( 2010052503 ; serial 10800 ; Refresh period 3600 ; Retry interval 604800 ; Expire time 10800 ; Negative caching TTL ) $ORIGIN domain.com. IN NS ns2.xname.org. IN NS ns0.xname.org. IN NS ns1.xname.org. @ IN A 65.49.73.148 * IN CNAME domain.com The '@' symbol is something that the godaddy domain interface uses to mean "this root domain', but that may have been specefic to that interface and has no meaning here. Before I had a 'www' entry in the A rcords and it worked in the sense that I could ping 'www.domain.com' and it returned a response, but pinging the root domain 'domain.com' returned "no host found".

  Read the article

• PHPMyAdmin: "General relation features: Disabled"

  - by Simón

  I've been looking around for something like this for a while, and I've found some tips on similar issues, but not exactly the same. I really don't know what to do. I downloaded and installed WAMP, and I have a MySQL and PHPMyAdmin setup according to common indications that can be found everywhere (securing MySQL root account, etc.). When I log into PHPMyAdmin (either as root or as pma), I see the following message at the bottom of the page: The additional features for working with linked tables have been deactivated. To find out why click here. And when following the link, got a page with the following: Server: localhost $cfg['Servers'][$i]['pmadb'] ... OK $cfg['Servers'][$i]['relation'] ... OK General relation features: Disabled $cfg['Servers'][$i]['table_info'] ... OK Display Features: Disabled $cfg['Servers'][$i]['table_coords'] ... OK $cfg['Servers'][$i]['pdf_pages'] ... OK Creation of PDFs: Disabled $cfg['Servers'][$i]['column_info'] ... OK Displaying Column Comments: Disabled Bookmarked SQL query: Disabled Browser transformation: Disabled $cfg['Servers'][$i]['history'] ... OK SQL history: Disabled $cfg['Servers'][$i]['designer_coords'] ... OK Designer: Disabled Somebody please explain to me, why the heck if all settings are "OK" the features remain "Disabled"? Note: at first all the settings were "not OK" and I managed to add the settings to config.inc.php, and then created the tables using scripts/create_tables.php. Of course I have already tried restarting the server or clearing the browser cache (several times, so I am sure the problem comes elsewhere).

  Read the article

• Xinerama creates a panning viewport

  - by iblue

  EDIT: I've created a bug report: https://bugs.freedesktop.org/show_bug.cgi?id=48458 My Setup I have 4 monitors, 1920x1080, which are in portrait mode (rotated left). They are connected to two radeon graphic cards. As usual, a picture says more than a thousand words. The problem Everything works fine, when Xinerama is disabled. But when I enable Xinerama, things get weird. When I move the mouse of the screen and return, the screen contents begin to move with the mouse, only on this monitor. It seems like the virtual display size does not match the real screen size, which activates a panning viewport. Any idea how to stop this? The video I created a video to demonstrate the issue: http://www.youtube.com/watch?v=zq_XHji1P24 xorg.conf This is my xorg.conf: Section "ServerLayout" ##################[ Evilness begins here ]############# Option "Xinerama" "on" # <--- Makes it go b0rked! ##################[ End of all evil ]############# Identifier "BOFH Console of Doom" Screen 0 "Screen-0" 0 0 Screen 1 "Screen-1" RightOf "Screen-0" Screen 2 "Screen-2" RightOf "Screen-1" Screen 3 "Screen-3" RightOf "Screen-2" EndSection Section "ServerFlags" Option "RandR" "false" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "dri2" Load "record" Load "glx" EndSection Section "Monitor" Identifier "Monitor-0" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-1" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-2" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-3" Option "Rotate" "left" EndSection Section "Device" Identifier "Radeon-0-0" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-0" Screen 0 EndSection Section "Device" Identifier "Radeon-0-1" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-1" Screen 1 EndSection Section "Device" Identifier "Radeon-1-0" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-2" Screen 0 EndSection Section "Device" Identifier "Radeon-1-1" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-3" Screen 1 EndSection Section "Screen" Identifier "Screen-0" Device "Radeon-0-0" Monitor "Monitor-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-1" Device "Radeon-0-1" Monitor "Monitor-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-2" Device "Radeon-1-0" Monitor "Monitor-2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-3" Device "Radeon-1-1" Monitor "Monitor-3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Scheduling Automatic Backups for Virtual Private Web Server running CENTOS 6.3 and WHM

  - by Oliver Farrell

  I'm pretty new to administering my own VPS - but thus far am finding it quite a compelling experience. There's something quite refreshing about having complete control over everything it does. One thing that I would like to look at is a suitable backup solution (a few times a day). My current setup is as follows: I'm running a CENTOS 6.3 VPS with a single 25GB hard drive solely for the purpose of hosting websites. I'm using WHM & cPanel for administering them. I now plan on adding an additional hard disk and hooking it up to my VPS. What I'm not sure about is how I get the two disks talking and get the backup process going. I'm not a seasons SSH-er so don't really know where to start. I'm hosting with Serverlove (one of the best hosting providers I've used) and am provided with a number of unique identifiers for each hard disk so I imagine these may play a part in linking them together. I appreciate that this is a little vague (I'm clutching at straws) but any assistance is very much appreciated.

  Read the article

• Computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Joomla SMTP Configuration Issue

  - by msargenttrue

  I'm having an issue with the SMTP setup of my Joomla website when trying to send mass emails through the CB Mailing (Mass Email) extension. I receive this error: SMTP Error! The following recipients failed: Number of users to whom e-mail was sent: 0 (Total in list: 1) The old version of this websites mass emailer worked fine, however, in order to add Kunena Forum and maintain compatibility I had to make several upgrades to the site. Both the new version and old verson configurations are outlined below. Server for Website: Mac OS X Server 10.4.11, Apache 1.3.4.1, PHP 5.2.3, MySQL 4.1.22 Server for SMTP: Eudora Internet Mail Server 3.3.9 (EIMS Server X) New Configuration: Joomla 1.5.25, Community Builder 1.7.1, CB Paid Subscriptions (CB Subs) 1.2.2, CBMailing 2.3.4, Kunena Forum 1.7.0, Legacy 1.0 plug-in disabled Mail Settings (New Config): Mailer: SMTP Server Mail from: [email protected] From Name: CASPA Sendmail Path: /usr/sbin/sendmail SMTP Authentication: Yes SMTP Security: None SMTP Port: 25 SMTP Username: [email protected] SMTP Password: xxxxxxx SMTP Host: 209.48.40.194 Old Configuration (Working SMTP Configuration): Joomla 1.5.9, Community Builder 1.2, CB Paid Subscriptions (CB Subs) 1.0.3, CB Mailing 2.1, Legacy 1.0 plug-in enabled Mail Settings (Old Config): Mailer: SMTP Server Mail from: [email protected] From Name: CASPA Sendmail Path: /usr/sbin/sendmail SMTP Authentication: Yes SMTP Username: [email protected] SMTP Password: xxxxxxx SMTP Host: 209.48.40.194 (Notice how the older version of Joomla is missing the 2 fields: SMTP Security and SMTP Port) Thanks in advance!

  Read the article

• grep --color=auto with -i option disables the matching text color, why?

  - by emptyset

  I was messing around with grep and put this in my .zshenv: export GREP_OPTIONS="--color=auto" export GREP_COLORS='mt=1;34' I was bonking my head on the keyboard and changing GREP_COLORS around for a minute trying to figure out why the folder colors were working, but the matching text wasn't. I was doing this: $ grep -R -n -i -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * The line number and file names were set with the default colors, but the matching text wasn't. After spending way too much time, I thought to do this: $ grep -R -n -e "functionFoo\(" --include=*.cs --exclude-dir=Logs * (I removed the -i option.) That's all it took to get the matching text to correctly show up in bold blue. This is a Cygwin on Vista setup, with rxvt running zsh. Any idea why grep colors would break on specifying a case-insensitive match? Update: Under cygwin 1.7, it's a little bit better - case insensitive search works correctly, but it only highlights the word that matches the expression exactly. In other words, "FunctionFoo" highlights "FunctionFoo" but not "functionFoo" and vice versa. Probably a grep issue so I'll be submitting it to that list.

  Read the article

• IPv6 Routing / Subnetting

  - by nappo

  Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

  Read the article

• when should be choose simple php mail and when smpt with loggin+password?

  - by user43353

  Hi, My Case: web application that need to send 1,000 messages per day to main gmail account. (Only need to send email, not need receive emails - email client) 1. option - use php mail function + sendmail + config php.ini php example: <?php $to = '[email protected]'; $subject = 'the subject'; $message = 'hello'; $headers = 'From: [email protected]' . "\r\n" . 'Reply-To: [email protected]' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); mail($to, $subject, $message, $headers); ?> php.ini config (ubuntu): sendmail_path = /usr/sbin/sendmail -t -i pros:don't need email account, easy to setup cons:? 2. option - use Zend_Mail + transport on smpt+ password auto php example(need include Zend_Mail classes): $config = array('auth' => 'login', 'username' => 'myusername', 'password' => 'password'); $transport = new Zend_Mail_Transport_Smtp('mail.server.com', $config); $mail = new Zend_Mail(); $mail->setBodyText('This is the text of the mail.'); $mail->setFrom('[email protected]', 'Some Sender'); $mail->addTo('[email protected]', 'Some Recipient'); $mail->setSubject('TestSubject'); $mail->send($transport); pros:? cons:? Questions: Can 1 option be filtered by gmail email server as spam? please can you add pros + cons to options above Thanks

  Read the article

• How to unblacklist an IP at Google?

  - by DJRayon

  I own a small business with two servers for webhosting. When setting up the primary (CentOS 5.5 + WHM, secondary is WHM DNS Only) server I kinda messed up the firewall, so the hackers could send stuff from my server. My primary IP is x.y.29.218. Anyway - I got blacklisted in several places, but now those blacklistings are gone. For a week or so, but Google still has my IP blacklisted. I handling serious damages because of that. Many clients want to switch from my hosting, etc. I've fixed the hole with CSF firewall SMTP_BLOCK option and enabled also the WHM SMTP TEAK Currently all I see from the Main Email View Mail Statistics (Errors section) in WHM is rows and rows of the following message removed-the-email-address-for-security R=lookuphost T=remote_smtp: SMTP error from remote mail server after end of data: host aspmx.l.google.com [a.b.39.27]: 550-5.7.1 [x.y.29.218 1] Our system has detected an unusual rate of\n550-5.7.1 unsolicited mail originating from your IP address. To protect our\n550-5.7.1 users from spam, mail sent from your IP address has been blocked.\n550-5.7.1 Please visit http://www.google.com/mail/help/bulk_mail.html to review\n550 5.7.1 our Bulk Email Senders Guidelines. h24si3868764fas.171 What are my options? I have one IP free. How can I configure Exim to send mail from that IP? My brain is like constantly blowing up because of this problem. Please someone, who has any knowledge how to deal with the current situation, please give me some kind of help - any help, suggestions, etc. I've tried everything I know, and I still don't know much, because this is the first time (I just started to webhost, etc) I deal with real physical servers not some kind of pre-setup VPS solution. Many - many thanks, whoever has time to offer some help.

  Read the article

• L2TP over IPSec VPN with OpenSwan and XL2TPD can't connect, timeout on Centos 6

  - by Disco

  I'm setting up LT2p over IPSec on my Centos 6.3 fresh install. I have iptables flushed, permit all. Whenever I try to connect, i get a 'no reply from vpn' and nothi Here's my ipsec.conf file (Server is 1.2.3.4) : config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=1.2.3.4 leftprotoport=17/1701 right=%any rightprotoport=17/%any My /etc/ipsec.secrets 1.2.3.4 %any: PSK "password" My sysctl.conf (appened lines) net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.default.log_martians = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.icmp_ignore_bogus_error_responses = 1 Here's what 'ipsec verify' gives: # ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.32/K2.6.32-279.19.1.el6.x86_64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] And I see xl2tpd is listening on 1701/udp : udp 0 0 1.2.3.4:1701 0.0.0.0:* 2096/xl2tpd

  Read the article

• Prevent master to fall back to master after failure

  - by Chrille

  I'm using keepalived to setup a virtual ip that points to a master server. When a failover happens it should point the virtual ip to the backup, and the IP should stay there until I manually enable (fix) the master. The reason this is important is that I'm running mysql replication on the servers and writes should only be on the master. When I failover I promote the slave to master. The master server: global_defs { ! this is who emails will go to on alerts notification_email { [email protected] ! add a few more email addresses here if you would like } notification_email_from [email protected] ! I use the local machine to relay mail smtp_server 127.0.0.1 smtp_connect_timeout 30 ! each load balancer should have a different ID ! this will be used in SMTP alerts, so you should make ! each router easily identifiable lvs_id APP1 } vrrp_instance APP1 { interface eth0 state EQUAL virtual_router_id 61 priority 999 nopreempt virtual_ipaddress { 217.x.x.129 } smtp_alert } Backup server: global_defs { ! this is who emails will go to on alerts notification_email { [email protected] ! add a few more email addresses here if you would like } notification_email_from [email protected] ! I use the local machine to relay mail smtp_server 127.0.0.1 smtp_connect_timeout 30 ! each load balancer should have a different ID ! this will be used in SMTP alerts, so you should make ! each router easily identifiable lvs_id APP2 } vrrp_instance APP2 { interface eth0 state EQUAL virtual_router_id 61 priority 100 virtual_ipaddress { 217.xx.xx.129 } notify_master "/etc/keepalived/notify.sh del app2" notify_backup "/etc/keepalived/notify.sh add app2" notify_fault "/etc/keepalived/notify.sh add app2” smtp_alert }

  Read the article

• IIS Digest repeatedly asking for authentication

  - by David Budiac

  I have a development copy of an ASP.NET intranet site checked out and running on my local machine. We're using digest authentication to allow users to log in using their active directory accounts. On my development copy only, Digest sometimes will repeatedly prompt for login information usually ~9 times per page request. After repeatedly logging in (or it also works to cancel out of 8 out of the 9 prompts), I can use the site as normal. I cannot pinpoint what is triggering the issue. Sometimes this problem triggers upon the next page request, sometimes after I edited/saved/refreshed a page, and sometimes it doesn't happen at all. Each prompt triggers several logon (Event ID 4624 & 4672) security events in the Events Viewer. Shortly after each burst of logon events, I'll see a burst of logoff events (Event ID A co-worker who has a nearly an identical setup (Windows 7, IIS 7) is not experiencing the issue. Our production copy (that is running on a different server) also does not experience the issue. We've tried to compare our settings in IIS, not really finding any differences. I'm using chrome but I've experienced the issue in other browsers.

  Read the article

< Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >