Search Results

Search found 2123 results on 85 pages for 'crossover cable'.

Page 60/85 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• solaris + why cant ping to default getway

  - by yael

  I have Solaris machine with IP 10.10.10.100 and default getway 10.10.10.1 and subnet 255.255.255.0 remark - solaris machine connected to cisco switch via cross cable and from switch to my laptop I configure my laptop to connect to my Solaris machine so my laptop IP is 10.10.10.1 and subnet 255.255.255.0 but something not clearly I have ssh connection from my laptop to my Solaris machine ( I mean I in my solaris machine ) but from Solaris machine I can do ping to 10.10.10.1 ? ( how it can be ??? ) please advice why?

  Read the article

• Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

  - by Robert

  From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• Rate of UDP packet loss over WLAN

  - by Martin

  While testing something with TFTP I noticed lots of timeouts (and slow speed as result) when I used my WLAN - and no problems when using a network cable. A quick test program sending/receiving UDP revealed that there are about 3-5% packets lost. While it's obvious that WLAN has to be less reliable than LAN, I have no knowledge what loss rates are considered 'normal' - and when there is a need to further investigate the network infrastructure. Are there 'typical' packet loss rates on WLAN (and other network technologies e.g. PowerLAN, WAN, ...? Thanks

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• How to route local traffic over switch?

  - by Franz Kafka

  I'm just cabled up at home but haven't got any way of verifying that gigabit speed can be reached. As I've only got one laptop with one network card, one cable, and one switch, I'm kind of stuck. I'm using a tool that you can start as a server or as a client to send data from one box to another. I would like to send and receive on the same Windows box. I guess if I use my network local IP address, my Windows 8.1 PC will just route traffic internally. Is there some way of forcing the traffic to go to the switch and back again?

  Read the article

• Slow internet connection on Mac OS

  - by user984621

  At home, we have a router. From router goes the internet connection into the desktop PC (Windows 7) and Macbook Pro. The problem is, that on Mac OS is incredibly slow internet connection - is not possible to use the laptop for surfing on the internet. The same as for WiFi as for cable. On the PC with Windows 7 is working the internet connection properly. Is there any tool for testing, if on my Mac is a virus or just something, what slowing down the internet connection? THank you in advance.

  Read the article

• windows 2008 server spooler problem

  - by air

  i have one windows 2008 server & windows xp clients. one HP2600n is connected to network with network cable, and installed in server and shared. also same printer is shared on xp cleints. the problem is: once cleints send print it come to the server que and stuck there untill we manually restart printer spooler service. once we restart the service all the prints in QUE prints and after that new prints again stuck in QUE till next manually restart. how can we solve this problem? Thanks

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• Samsung TV connected to PC for Powerpoint

  - by Skaughty

  I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

  Read the article

• Which method of SQL Server 2005 or 2008 Replication is best for ease of field changes?

  - by Rick

  We need 15 minute warm updates from one SQL Server to another. Log Shipping looks good and appears easy to setup. We are also looking into Transactional Replication. The data only needs to copy one way. We have two main requirements: 1) The destination database needs to be a max 15 minute old copy of the source. It needs to re-try and get up-to-date if a network cable is unplugged for a while. 2) We would really like table (fields added or modified) changes in the source as easy as possible. Thanks in advance for all suggestions.

  Read the article

• Extend university wifi network [migrated]

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want? Thank you all

  Read the article

• Configure PL2303-based USB-to-RS232 adapter to stay awake when no active device is present

  - by casualuser

  I am resurrecting some X10 devices with the aid of a USB-to-RS232 adapter. The problem is, that the adapter only works with the Firecracker device when there is another serial device on the line (the Firecracker is a pass-through device that monitors the RTS and DTR lines to do its magic). Is the PL2303 going to sleep without a real device on the line? Is there an option or command to keep it awake? Is there a cable configuration that would make it work without a real serial device present?

  Read the article

• Infected Win XP disk not openable on a Vista computer

  - by Retired57

  How can I read a WinXP partioned disk that is infected and shows up on a USB connection to Win Vista computer as a single partition that Vista cannot see the contents? The XP computer HDD is partioned into 4 partitions. It became infected, and all attempts to clean it have failed. Applications begin to launch, but are then shut down by the infecting agent. Using a major Anti-virus Co. boot disk (which was unable to connect to the Web, probably because the infecting agent stopped it) with virus definitions dated after the disk became infected, the resultant scan showed no infection. I bought a USB cable to connect the IDE drive to my Vista computer, but when I open Win Explorer, it sees the disk, but does not show any contents. It indicates it is a single partition that is valid. However in all the ways I have tried it does not show drive contents. Any suggestions on what to do next?

  Read the article

• Database for heat tolerances of various cables?

  - by I. F.

  Is there any kind of unified database of heat tolerances for networking cables? I've been setting up a number of home/small office networks lately and as a mostly-amateur I could really use some information on what is safe to run behind a radiator, next to a steam pipe, etc. The question I'm up against at the moment is: Can I run normal RJ11 phone line cable (from DSL modem to phone jack) behind a steam radiator without risking a fire? Unlike cat5, I could not find published standards for these, so I'm turning to experts with more experience. This is a cut-rate show. Do I go out and buy more cabling, and if so which, or use the spare that I have?

  Read the article

• How do I record sound from my CD/DVD player without other system sounds in the mix?

  - by Software Monkey

  Using GoldWave I can record via the "Stereo Mix" channel, but I get no sound on the "CD" channel. Of course, using the stereo mix also mixes in all system sounds, including beeps, etc. I have the analog out on the DVD player connected to the CD-IN connector on the MoBo. I can hear CDs and DVDs playing just fine through my speakers - is this because the CD is also IDE data connection in to deliver the sound to the sound card, then? I specifically want to record a DVD; I can easily rip a CD using GoldWave's built-in ripper. Is there anything I have forgotten or have to enable? Or is it likely I have a damaged cable? My system is an MSI mobo and is running Windows XP SP3.

  Read the article

• Wireless only connects to Google

  - by dmanxiii

  I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

  Read the article

• How can I disable my laptop's built-in keyboard?

  - by sam

  I have a HP Compaq Presario C700 laptop with Windows 7 installed on it. My laptop's keyboard is not working properly; some keys never work and some keys will keep on pressing. I've formatted the OS but it didn't solve my problem. I bought an external USB keyboard and it works well. As some keys in the built-in keyboard activate themselves, I still couldn't work effectively. After searching Google I tried the following steps to disable the built-in keyboard: Disabled keyboard drivers: This didn't work because when the system reboots, the driver gets installed again automatically. Installed irrelevant driver for keyboard: This failed - I couldn't install the driver. After rebooting it installed the correct driver automatically. Can anyone help explain how I can temporarily uninstall my built-in keyboard? I don't want to remove it manually (removing the hardware cable).

  Read the article

• Laptop with Windows 7 turns on spontaneously while being in "Sleep" state

  - by alexb

  I own a laptop(HP Pavilion DV7) with Windows 7 installed for already half a year. Usually when I finish my work I do not turn machine off - closing is enough to get is into "Sleep" state. Generally it's okay for me, but recent several days laptop was turning on in night spontaneously, while I was sleeping. I haven't installed any app with "turn-on by schedule on when_dooes_pc_wants"-like features. Checked if there are some "Wake-On-Lan"-like settings in BIOS, haven't found ones. The power-cable is always plugged-in. Does someone have any suggestions regarding that? p.s. laptop is placed right near by bed, so when it turns-on on night - it is quite annoying and a bit scary. I think it's trolling me, please help to stop it :) Thanks.

  Read the article

• DNS point to server on ISP and keep shared host too?

  - by Dwayne

  I know this is probably quite easy to do, but I might just have the right search sorted out... so here is the situation: We have example.com set up as a hosted server along with app1.example.com, app2.example.com and a few others. What I would like to do is set up the right zone file to also make our internal server addressable from the outside world as internalapp.example.com. This server sits behind a firewall (pfsense) and is hooked up to the world via a cable modem that is technically on DHCP from our ISP, but has had the same external IP for the past 15 months so far. What would be the best way to set this up?

  Read the article

• Planning office network [closed]

  - by gakhov

  I'm planning to setup my office network from scratch and want to ask professional opinions or tips. My office is connected to Internet with Cable connection (100Mb/s). The devices i would like to connect are VoIP Phone (RJ-11), TV (WiFi/LAN), 3 laptops (WiFi), a few smartphones (WiFi), iPad (WiFi), Kindle (WiFi) and, probably, MediaServer (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, i need help to choose the best routers combination (or even one?) to support stable connections for all these devices and minimize the total number of routers/adapters. Any thoughts? Thank you!

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• Window 7 not recognizing printer for driver (re)installation

  - by user55406

  OK I am having this printer problem. I had a user delete her printer. Please don't ask, I don't know. She is using an HP deskjet 6940 printer, and for her desktop she has an HP dx2400, with Windows 7. When I plug in the USB cable it should install the new drivers, but it does not. I believe you guys don't need to know my network setup. I could be wrong. If you guys here at serverfault could help that will be great. :)

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >