Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 610/2372 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

• Log & monitor mysql databases on servers

  - by user3215

  How MySQL databases logged and monitored on ubuntu servers in real time?. I checked /var/log/mysql.log and found it empty. EDIT 1: The log was not enabled in the mysql configuration file. Now it logs and I could see the logs in the file /var/log/mysql/mysql.log But this could not be sufficient to gather additional information about the database logs. Is there any other way or any popular open source tool?

  Read the article

• Memcached Lagging

  - by Brad Dwyer

  Let me preface this by saying that this is a followup question to this topic. That was "solved" by switching from Solaris (SmartOS) to Ubuntu for the memcached server. Now we've multiplied load by about 5x and are running into problems again. We are running a site that is doing about 1000 requests/minute, each request hits Memcached with approximately 3 reads and 1 write. So load is approximately 65 requests per second. Total data in the cache is about 37M, and each key contains a very small amount of data (a JSON-encoded array of integers amounting to less than 1K). We have setup a benchmarking script on these pages and fed the data into StatsD for logging. The problem is that there are spikes where Memcached takes a very long time to respond. These do not appear to correlate with spikes in traffic. What could be causing these spikes? Why would memcached take over a second to reply? We just booted up a second server to put in the pool and it didn't make any noticeable difference in the frequency or severity of the spikes. This is the output of getStats() on the servers: Array ( [-----------] => Array ( [pid] => 1364 [uptime] => 3715684 [threads] => 4 [time] => 1336596719 [pointer_size] => 64 [rusage_user_seconds] => 7924 [rusage_user_microseconds] => 170000 [rusage_system_seconds] => 187214 [rusage_system_microseconds] => 190000 [curr_items] => 12578 [total_items] => 53516300 [limit_maxbytes] => 943718400 [curr_connections] => 14 [total_connections] => 72550117 [connection_structures] => 165 [bytes] => 2616068 [cmd_get] => 450388258 [cmd_set] => 53493365 [get_hits] => 450388258 [get_misses] => 2244297 [evictions] => 0 [bytes_read] => 2138744916 [bytes_written] => 745275216 [version] => 1.4.2 ) [-----------:11211] => Array ( [pid] => 8099 [uptime] => 4687 [threads] => 4 [time] => 1336596719 [pointer_size] => 64 [rusage_user_seconds] => 7 [rusage_user_microseconds] => 170000 [rusage_system_seconds] => 290 [rusage_system_microseconds] => 990000 [curr_items] => 2384 [total_items] => 225964 [limit_maxbytes] => 943718400 [curr_connections] => 7 [total_connections] => 588097 [connection_structures] => 91 [bytes] => 562641 [cmd_get] => 1012562 [cmd_set] => 225778 [get_hits] => 1012562 [get_misses] => 125161 [evictions] => 0 [bytes_read] => 91270698 [bytes_written] => 350071516 [version] => 1.4.2 ) ) Edit: Here is the result of a set and retrieve of 10,000 values. Normal: Stored 10000 values in 5.6118 seconds. Average: 0.0006 High: 0.1958 Low: 0.0003 Fetched 10000 values in 5.1215 seconds. Average: 0.0005 High: 0.0141 Low: 0.0003 When Spiking: Stored 10000 values in 16.5074 seconds. Average: 0.0017 High: 0.9288 Low: 0.0003 Fetched 10000 values in 19.8771 seconds. Average: 0.0020 High: 0.9478 Low: 0.0003

  Read the article

• Oracle Keynote Panel at AIIM - The Movie

  - by [email protected]

  I've uploaded the video of the Oracle keynote panel at AIIM. It's broken into a number of segments, and I've put some of the quotes in the comments area so you can follow the topics as you decide which one to view. You can see the video here. A big thanks to our panelists for their time and insights - Cindy Bixler of Embry Riddle Aeronautical Univerisity, Tom Showalter of JP Morgan Chase, Irfan Motiwala of Moodys Investments, and Monica Crocker of Land O' Lakes, and a special thanks to our moderator, Robert Shimp of Oracle.

  Read the article

• Use Autoruns to Manually Clean an Infected PC

  - by Mark Virtue

  There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program?  Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit.  It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer).  Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer.  It can be simply downloaded, unzipped and run (link below).  This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry.  Note:  This does not terminate the program if it is running at the time – it merely prevents it from starting next time.  To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)).  Note:  This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not.  Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you.  Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay.  Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”).  Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries:  Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them.  Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place.  If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others.  Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry.  Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry.  When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• The Shift: how Orchard painlessly shifted to document storage, and how it’ll affect you

  - by Bertrand Le Roy

  We’ve known it all along. The storage for Orchard content items would be much more efficient using a document database than a relational one. Orchard content items are composed of parts that serialize naturally into infoset kinds of documents. Storing them as relational data like we’ve done so far was unnatural and requires the data for a single item to span multiple tables, related through 1-1 relationships. This means lots of joins in queries, and a great potential for Select N+1 problems. Document databases, unfortunately, are still a tough sell in many places that prefer the more familiar relational model. Being able to x-copy Orchard to hosters has also been a basic constraint in the design of Orchard. Combine those with the necessity at the time to run in medium trust, and with license compatibility issues, and you’ll find yourself with very few reasonable choices. So we went, a little reluctantly, for relational SQL stores, with the dream of one day transitioning to document storage. We have played for a while with the idea of building our own document storage on top of SQL databases, and Sébastien implemented something more than decent along those lines, but we had a better way all along that we didn’t notice until recently… In Orchard, there are fields, which are named properties that you can add dynamically to a content part. Because they are so dynamic, we have been storing them as XML into a column on the main content item table. This infoset storage and its associated API are fairly generic, but were only used for fields. The breakthrough was when Sébastien realized how this existing storage could give us the advantages of document storage with minimal changes, while continuing to use relational databases as the substrate. public bool CommercialPrices { get { return this.Retrieve(p => p.CommercialPrices); } set { this.Store(p => p.CommercialPrices, value); } } This code is very compact and efficient because the API can infer from the expression what the type and name of the property are. It is then able to do the proper conversions for you. For this code to work in a content part, there is no need for a record at all. This is particularly nice for site settings: one query on one table and you get everything you need. This shows how the existing infoset solves the data storage problem, but you still need to query. Well, for those properties that need to be filtered and sorted on, you can still use the current record-based relational system. This of course continues to work. We do however provide APIs that make it trivial to store into both record properties and the infoset storage in one operation: public double Price { get { return Retrieve(r => r.Price); } set { Store(r => r.Price, value); } } This code looks strikingly similar to the non-record case above. The difference is that it will manage both the infoset and the record-based storages. The call to the Store method will send the data in both places, keeping them in sync. The call to the Retrieve method does something even cooler: if the property you’re looking for exists in the infoset, it will return it, but if it doesn’t, it will automatically look into the record for it. And if that wasn’t cool enough, it will take that value from the record and store it into the infoset for the next time it’s required. This means that your data will start automagically migrating to infoset storage just by virtue of using the code above instead of the usual: public double Price { get { return Record.Price; } set { Record.Price = value; } } As your users browse the site, it will get faster and faster as Select N+1 issues will optimize themselves away. If you preferred, you could still have explicit migration code, but it really shouldn’t be necessary most of the time. If you do already have code using QueryHints to mitigate Select N+1 issues, you might want to reconsider those, as with the new system, you’ll want to avoid joins that you don’t need for filtering or sorting, further optimizing your queries. There are some rare cases where the storage of the property must be handled differently. Check out this string[] property on SearchSettingsPart for example: public string[] SearchedFields { get { return (Retrieve<string>("SearchedFields") ?? "") .Split(new[] {',', ' '}, StringSplitOptions.RemoveEmptyEntries); } set { Store("SearchedFields", String.Join(", ", value)); } } The array of strings is transformed by the property accessors into and from a comma-separated list stored in a string. The Retrieve and Store overloads used in this case are lower-level versions that explicitly specify the type and name of the attribute to retrieve or store. You may be wondering what this means for code or operations that look directly at the database tables instead of going through the new infoset APIs. Even if there is a record, the infoset version of the property will win if it exists, so it is necessary to keep the infoset up-to-date. It’s not very complicated, but definitely something to keep in mind. Here is what a product record looks like in Nwazet.Commerce for example: And here is the same data in the infoset: The infoset is stored in Orchard_Framework_ContentItemRecord or Orchard_Framework_ContentItemVersionRecord, depending on whether the content type is versionable or not. A good way to find what you’re looking for is to inspect the record table first, as it’s usually easier to read, and then get the item record of the same id. Here is the detailed XML document for this product: <Data> <ProductPart Inventory="40" Price="18" Sku="pi-camera-box" OutOfStockMessage="" AllowBackOrder="false" Weight="0.2" Size="" ShippingCost="null" IsDigital="false" /> <ProductAttributesPart Attributes="" /> <AutoroutePart DisplayAlias="camera-box" /> <TitlePart Title="Nwazet Pi Camera Box" /> <BodyPart Text="[...]" /> <CommonPart CreatedUtc="2013-09-10T00:39:00Z" PublishedUtc="2013-09-14T01:07:47Z" /> </Data> The data is neatly organized under each part. It is easy to see how that document is all you need to know about that content item, all in one table. If you want to modify that data directly in the database, you should be careful to do it in both the record table and the infoset in the content item record. In this configuration, the record is now nothing more than an index, and will only be used for sorting and filtering. Of course, it’s perfectly fine to mix record-backed properties and record-less properties on the same part. It really depends what you think must be sorted and filtered on. In turn, this potentially simplifies migrations considerably. So here it is, the great shift of Orchard to document storage, something that Orchard has been designed for all along, and that we were able to implement with a satisfying and surprising economy of resources. Expect this code to make its way into the 1.8 version of Orchard when that’s available.

  Read the article

• Ghost team foundation build controllers

  - by Martin Hinshelwood

  Quite often after an upgrade there are things left over. Most of the time they are easy to delete, but sometimes it takes a little effort. Even rarer are those times when something just will not go away no matter how much you try. We have had a ghost team build controller hanging around for a while now, and it had defeated my best efforts to get rid of it. The build controller was from our old TFS server from before our TFS 2010 beta 2 upgrade and was really starting to annoy me. Every time I try to delete it I get the message: Controller cannot be deleted because there are build in progress -Manage Build Controller dialog   Figure: Deleting a ghost controller does not always work. I ended up checking all of our 172 Team Projects for the build that was queued, but did not find anything. Jim Lamb pointed me to the “tbl_BuildQueue” table in the team Project Collection database and sure enough there was the nasty little beggar. Figure: The ghost build was easily spotted Adam Cogan asked me: “Why did you suspect this one?” Well, there are a number of things that led me to suspect it: QueueId is very low: Look at the other items, they are in the thousands not single digits ControllerId: I know there is only one legitimate controller, and I am assuming that 6 relates to “zzUnicorn” DefinitionId: This is a very low number and I looked it up in “tbl_BuildDefinition” and it did not exist QueueTime: As we did not upgrade to TFS 2010 until late 2009 a date of 2008 for a queued build is very suspect Status: A status of 2 means that it is still queued This build must have been queued long ago when we were using TFS 2008, probably a beta, and it never got cleaned up. As controllers are new in TFS 2010 it would have created the “zzUnicorn” controller to handle any build servers that already exist. I had previously deleted the Agent, but leaving the controller just looks untidy. Now that the ghost build has been identified there are two options: Delete the row I would not recommend ever deleting anything from the database to achieve something in TFS. It is really not supported. Set the Status to cancelled (Recommended) This is the best option as TFS will then clean it up itself So I set the Status of this build to 2 (cancelled) and sure enough it disappeared after a couple of minutes and I was then able to then delete the “zzUnicorn” controller. Figure: Almost completely clean Now all I have to do is get rid of that untidy “zzBunyip” agent, but that will require rewriting one of our build scripts which will have to wait for now.   Technorati Tags: ALM,TFBS,TFS 2010

  Read the article

• Always keep files updated in Eclipse

  - by AK01

  I keep lots of files/editors open in Eclipse. I also love using git stash and other git commands that essentially change the contents of my open files. Is there an Eclipse feature or plugin that will always keep the contents of my open files up to date and live? Currently if I put focus in an out of sync editor, I get an awkwardly worded dialog that I have to parse carefully every time. I wish it would just keep me synced like Textmate does.

  Read the article

• CodePlex Daily Summary for Wednesday, November 23, 2011

  CodePlex Daily Summary for Wednesday, November 23, 2011Popular ReleasesVisual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775Developer Team Article System Management: DTASM v1.3: ?? ??? ???? 3 ????? ???? ???? ????? ??? : - ????? ?????? ????? ???? ?? ??? ???? ????? ?? ??? ? ?? ???? ?????? ???? ?? ???? ????? ?? . - ??? ?? ???? ????? ???? ????? ???? ???? ?? ????? , ?????? ????? ????? ?? ??? . - ??? ??????? ??? ??? ???? ?? ????? ????? ????? .SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...Anno 2070 Assistant: v0.1.0 (STABLE): Version 0.1.0 Features Production Chains Eco Production Chains (Complete) Tycoon Production Chains (Disabled - Incomplete) Tech Production Chains (Disabled - Incomplete) Supply (Disabled - Incomplete) Calculator (Disabled - Incomplete) Building Layouts Eco Building Layouts (Complete) Tycoon Building Layouts (Disabled - Incomplete) Tech Building Layouts (Disabled - Incomplete) Credits (Complete)Free SharePoint 2010 Sites Templates: SharePoint Server 2010 Sites Templates: here is the list of sites templates to be downloadedVsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 30 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 30 (beta)New: Support for TortoiseSVN 1.7 added. (the download contains both setups, for TortoiseSVN 1.6 and 1.7) New: OpenModifiedDocumentDialog displays conflicted files now. New: OpenModifiedDocument allows to group items by changelist now. Fix: OpenModifiedDocumentDialog caused Visual Studio 2010 to freeze sometimes. Fix: The installer didn...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.30: Highlight features & improvements: • Performance optimization. • Back in stock notifications. • Product special price support. • Catalog mode (based on customer role) To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).WPF Converters: WPF Converters V1.2.0.0: support for enumerations, value types, and reference types in the expression converter's equality operators the expression converter now handles DependencyProperty.UnsetValue as argument values correctly (#4062) StyleCop conformance (more or less)Json.NET: Json.NET 4.0 Release 4: Change - JsonTextReader.Culture is now CultureInfo.InvariantCulture by default Change - KeyValurPairConverter no longer cares about the order of the key and value properties Change - Time zone conversions now use new TimeZoneInfo instead of TimeZone Fix - Fixed boolean values sometimes being capitalized when converting to XML Fix - Fixed error when deserializing ConcurrentDictionary Fix - Fixed serializing some Uris returning the incorrect value Fix - Fixed occasional error when...Media Companion: MC 3.423b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Replaced 'Rebuild' with 'Refresh' throughout entire code. Rebuild will now be known as Refresh. mc_com.exe has been fully updated TV Show Resolutions... Resolved issue #206 - having to hit save twice when updating runtime manually Shrunk cache size and lowered loading times f...Delta Engine: Delta Engine Beta Preview v0.9.1: v0.9.1 beta release with lots of refactoring, fixes, new samples and support for iOS, Android and WP7 (you need a Marketplace account however). If you want a binary release for the games (like v0.9.0), just say so in the Forum or here and we will quickly prepare one. It is just not much different from v0.9.0, so I left it out this time. See http://DeltaEngine.net/Wiki.Roadmap for details.ASP.net Awesome Samples (Web-Forms): 1.0 samples: Demos and Tutorials for ASP.net Awesome VS2008 are in .NET 3.5 VS2010 are in .NET 4.0 (demos for the ASP.net Awesome jQuery Ajax Controls)SharpMap - Geospatial Application Framework for the CLR: SharpMap-0.9-AnyCPU-Trunk-2011.11.17: This is a build of SharpMap from the 0.9 development trunk as per 2011-11-17 For most applications the AnyCPU release is the recommended, but in case you need an x86 build that is included to. For some dataproviders (GDAL/OGR, SqLite, PostGis) you need to also referense the SharpMap.Extensions assembly For SqlServer Spatial you need to reference the SharpMap.SqlServerSpatial assemblyAJAX Control Toolkit: November 2011 Release: AJAX Control Toolkit Release Notes - November 2011 Release Version 51116November 2011 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 - Binary – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 - Binary – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found h...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.36: Fix for issue #16908: string literals containing ASP.NET replacement syntax fail if the ASP.NET code contains the same character as the string literal delimiter. Also, we shouldn't be changing the delimiter for those literals or combining them with other literals; the developer may have specifically chosen the delimiter used because of possible content inserted by ASP.NET code. This logic is normally off; turn it on via the -aspnet command-line flag (or the Code.Settings.AllowEmbeddedAspNetBl...MVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds SDK .NET Wrapper to provide this functionality.Aigu: Enter special characters like you would on your mobile phone. For instance, if you want to type 'é', you just hold down 'e' and a menu will appear. Selected the desired character using the arrow keys and press 'enter'. Simple but powerful.Are you workaholic?: Are you a workaholic? Did your Doctor advice you not to stare at the computer monitor for a long time? Then this app is perfectly made for you. It runs in the background, and alerts you to take periodic rests for your eyes and body. What's more, It's open source (MS-PL).ATDIS PoC: privateAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This allows you to publish new versions of these files without having to force the server or the client browsers to expire cache.Bachelor Thesis Algorithm Test Bed: Algorithm Test Bed for my Bachelor ThesisBase64: Simple application helps converting strings and files from or to Base64 string. You can use any encoding to convert while a sidebar previews decoded string for all other encodings.BoracayExpress: BoracayExpressC++ Framework for Test Driven Development: A testing framework for C++ written in C++.Class2Table: Class2Table aka Entity2Table. Easy tool that allows creation of SQL tables from .Net types.Code for Demos & Experiments: This is where I will post code from demos and presentationsCodeMaker: CodeMaker?????????： 1、?????????? 2、???? 3、????? 4、??Python????????? ConsoleCommand: ConsoleCommand provides certain .Net commands for access from javascript console engines. Included are commands to set the text and background colors, as well as list and extract resources compiled in a .Net dll. Converter: Character code conversion tools ???????? CryptoInator - self contained, self-encrypting, self-decrypting image viewer: Original developed to encrypt and store NemID images in Denmark. DAiBears: Something, something, botDelicious Notify Plugin: Lets you push a blog post straight to Delicious from Live WriterDeveloperFile: Compresses Javascripts using the YUI .NET project. Loops through the root folder and subfolders for files matching the debug extension and creates new files using the release extension. (File extensions must match exactly).DotNetNuke SharePoint File Explorer: A DotNetNuke SharePoint File ExplorerDouban FM: WP7 Douban FM appGame Lib: Game Library is a open-source game library to allow focusing on the fun part of a game. It is developed in C#, but will be ported to C++ and VB.net.Google reader notes to Delicious Export tool (WPF): Google reader discontinued note in reader features. Current google reader allows to export users old notes in JSON format, This App will parse the JSON file & upload it to it delicious , delicious is a good alternative for note in readerHtml Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that was before server exception. It helps to reproduce bugs and can be used with other logging systems.Ideopuzzle: A puzzle gameImageShack-Uploader: This project demonstrates how to upload files automated to imageshack.us and other image hosters with C#.Insert Acronym Tags: Lets you insert <acronym> and <abbr> tags into your blog entry more easily.Insert Quick Link: Allows you to paste a link into the Writer window and have the a window similar to the one in Writer where you can change what text is to appear, open in new window, etc.Insert Video Plugin: Allows you to insert a video into a blog entry from a multitude of different sitesIoCWrap: Provides a wrapper to the various IoC container implementations so that it is possible to switch to a different provider without changing any application code.kaveepoj: sharepoint projectKinect Quiz Engine: Fun quiz game for the Kinect.Klaverjas: Test application for testing different new technologies in .NET (WCF, DataServices, C# stuff, Entity...etc.)Man In The Middle: A cyberpunk themed action with puzzle and strategy elements. Made with XNA as part of a game development course at the IT University of Copenhagen by Bo Bendtsen, Jonas Flensbak, Daniel Kromand, Jess Rahbek & Darryl Woodford.MediaSelektor: Simple tool to select mediasMicajah Mindtouch Deki Wiki Copier: Small C# application to move data between 2 Deki Wiki installs or, more importantly, from a wik.is account to a locally installed systemMineFlagger: MineFlagger is a mine clearing game modeled after Microsoft’s Minesweeper. In addition to standard play, MineFlagger incorporates an AI for fun and training.myXbyqwrhjadsfasfhgf: myXbyqwrhjadsfasfhgfnatoop: natoopNauplius.KeyStore: Provides secure application key storage backed by SQL 2008 and Active Directory.ObjectDB: An object database written using C# 4 and Mono.Cecil.PaceR: PaceR is an attempt to encapsulate a lot of the common code functionality I use on different projects. Instead of recreating functionality from memory or worse, copying from older projects, I'd like to have a central location to maintain this common code. Parseq: Parseq is a Parser Combinator library written in C# (version 2.0).PowerShell Network Adapter Configuration module: PowerShell Network Adapter Configuration module is a PowerShell module which provides functions for managing network adapters using WMI.public traffic tracker: This is a university project for a .net course. We develop a public traffic tracker applications for Windows Phone 7 devices, that can give information about the actual positions of the nearest vehicle on a given line. The speciality is that we use only the GPS information of the users' WP7 devices, so this is a completely software solution without any hardware investment. The disatvantage is that for the real operation we would need a lot of active WP7 user.puyo: puyoRadioTroll: Projeto web Radio TrollRead Feed Community: Read Feed CommunityReviewer: Reviewer.dk - Dansk spil og anmeldelsessite.Rollout Sharepoint Solutions - ROSS: ROSS performs the following actions: - Delete sitecollection and restart services - 'Get Latest Version' from SourceSafe - Rebuild Solution - Install all wsp solutions - Create SiteCollections - Check for build en provisioning errors - Send email to developers if errors occurredSchool Management: school managementSQL File Executer: This project is a class library written in c# which is used for executing *.sql files in remote server. Simply one dll file. You include it in your web project, add using statement at the top of your page, pass the parameters inside. Rest, it will do.Startup Manager: Startup Manager launches all startup programs at a managed rate therefore meaning that your computer doesn't crash everytime it starts up and you can use it immediately.stetic: ...Test Infrastructure Guidance: The purpose of this project is to provide guidance to testers in using TFS effectively as an ALM solution. TFS is much more than a simple code repository. Used with Visual Studio it can form a powerful testing solution and remove a lot of pain in dealing with test infrastructure overhead.Tête-à-tête: Tete-a-tete is an address book with a built-in function to send electronic mail over the Internet.Tipeysh! - Add-in that helps you creating C/C++ header files on a single click: Are you also feel miserable when you need to create a new header file in your Visual Studio C/C++ project? Repeatedly choosing "new header file", then writing the annoying (but needed) "#ifndef" section, then writing the class name with it's "private", "protected" and "public" access modifiers... too much clicks and typewriting! Well, there is a solution: Tipeysh! is a simple, easy to use, very handy and configurable Visual Studio Add-In, compatible for both the 2005 and 2008 versions. Once ...UMN Dashboard Project: academic projUsersMOSS: UsersMOSS est une petite application permettant de consulter sur un serveur MOSS les sites web (SPWeb) les users (SPUser), et les groupes (SPGroup). Cette application utilise le modèle objet de MOSS pour inspecter le contenu des objets d'un serveur MOSS. Cette application est loin d'être professionnelle, ou même terminée, mais elle me rend très souvent service. Surtout ne l'utilisez pas sur un serveur de production car le gestion du GC n'est pas faite, ce qui peut provoquer des plantages de v...UtilityLibrary.Win32: UtilityLibrary.Win32UW iLearn: The iLearn activity inference platform is a suite of desktop and mobile tools for logging, modeling, and classifying sensor data for mobile devices. It was created at the University of Washington.VsDocGen: Dynamic javascript documentation generation directly from xml comment documented source code.Windows Live Spaces Photo Album plugin: This is going to be a plugin for Windows Live Writer that will allow you to browse a Windows Live Space Photo Album.Windows Live Writer Plugin for Amazon Books using CueCat: This Windows Live Writer Plugin is for users who use WLW and wish to use their CueCat to scan books. ItemLookups are run against Amazon via its AWS and book image, title, author, and publisher is returned. This project was first created by Scott Hanselman on MSDN's Coding4Fun! X7: X7 makes it easier for win7user to clean the system. You'll no longer have to delete useless stuff in your win7. It's developed in bat.xDT - Commander: Using this application, the user can assign shortcuts (short texts) for various links/URLs. These short texts will be typed into a Textbox to then launch/go to the target (similar to the "Run" program in Windows).

  Read the article

• You do not need a separate SQL Server license for a Standby or Passive server - this Microsoft White Paper explains all

  - by tonyrogerson

  If you were in any doubt at all that you need to license Standby / Passive Failover servers then the White Paper “Do Not Pay Too Much for Your Database Licensing” will settle those doubts. I’ve had debate before people thinking you can only have a single instance as a standby machine, that’s just wrong; it would mean you could have a scenario where you had a 2 node active/passive cluster with database mirroring and log shipping (a total of 4 SQL Server instances) – in that set up you only need to buy one physical license so long as the standby nodes have the same or less physical processors (cores are irrelevant). So next time your supplier suggests you need a license for your standby box tell them you don’t and educate them by pointing them to the white paper. For clarity I’ve copied the extract below from the White Paper. Extract from “Do Not Pay Too Much for Your Database Licensing” Standby Server Customers often implement standby server to make sure the application continues to function in case primary server fails. Standby server continuously receives updates from the primary server and will take over the role of primary server in case of failure in the primary server. Following are comparisons of how each vendor supports standby server licensing. SQL Server Customers does not need to license standby (or passive) server provided that the number of processors in the standby server is equal or less than those in the active server. Oracle DB Oracle requires customer to fully license both active and standby servers even though the standby server is essentially idle most of the time. IBM DB2 IBM licensing on standby server is quite complicated and is different for every editions of DB2. For Enterprise Edition, a minimum of 100 PVUs or 25 Authorized User is needed to license standby server.   The following graph compares prices based on a database application with two processors (dual-core) and 25 users with one standby server. [chart snipped]  Note   All prices are based on newest Intel Xeon Nehalem processor database pricing for purchases within the United States and are in United States dollars. Pricing is based on information available on vendor Web sites for Enterprise Edition. Microsoft SQL Server Enterprise Edition 25 users (CALs) x $164 / CAL + $8,592 / Server = $12,692 (no need to license standby server) Oracle Enterprise Edition (base license without options) Named User Plus minimum (25 Named Users Plus per Core) = 25 x 2 = 50 Named Users Plus x $950 / Named Users Plus x 2 servers = $95,000 IBM DB2 Enterprise Edition (base license without feature pack) Need to purchase 125 Authorized User (400 PVUs/100 PVUs = 4 X 25 = 100 Authorized User + 25 Authorized Users for standby server) = 125 Authorized Users x $1,040 / Authorized Users = $130,000  

  Read the article

• Responding to Invites

  - by Daniel Moth

  Following up from my post about Sending Outlook Invites here is a shorter one on how to respond. Whatever your choice (ACCEPT, TENTATIVE, DECLINE), if the sender has not unchecked the "Request Response" option, then send your response. Always send your response. Even if you think the sender made a mistake in keeping it on, send your response. Seriously, not responding is plain rude. If you knew about the meeting, and you are happy investing your time in it, and the time and location work for you, and there is an implicit/explicit agenda, then ACCEPT and send it. If one or more of those things don't work for you then you have a few options. Send a DECLINE explaining why. Reply with email to ask for further details or for a change to be made. If you don’t receive a response to your email, send a DECLINE when you've waited enough. Send a TENTATIVE if you haven't made up your mind yet. Hint: if they really require you there, they'll respond asking "why tentative" and you have a discussion about it. When you deem appropriate, instead of the options above, you can also use the counter propose feature of Outlook but IMO that feature has questionable interaction model and UI (on both sender and recipient) so many people get confused by it. BTW, two of my outlook rules are relevant to invites. The first one auto-marks as read the ACCEPT responses if there is no comment in the body of the accept (I check later who has accepted and who hasn't via the "Tracking" button of the invite). I don’t have a rule for the DECLINE and TENTATIVE cause typically I follow up with folks that send those.   The second rule ensures that all Invites go to a specific folder. That is the first folder I see when I triage email. It is also the only folder which I have configured to show a count of all items inside it, rather than the unread count - when sending a response to an invite the item disappears from the folder and hence it is empty and not nagging me. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• 5 Reasons why I hate WPF

  - by Richard Mitchell

  I decided to use writing a new tool as a way to learn WPF and MVVM and I thought I'd write down a few of my problems as a way of cathartic release. I decided to read a book before attempting WPF for the first time as I've heard others complain about the steep learning curve. I chose the rather excellent "WPF 4 Unleashed" by Adam Nathan to read through and "Pro WPF in C# 2010" by Matthew MacDonald as a reference whilst I programmed. 1 - Poor editing support for XAML The first thing I think any...(read more)

  Read the article

• Use BGInfo to Build a Database of System Information of Your Network Computers

  - by Sysadmin Geek

  One of the more popular tools of the Sysinternals suite among system administrators is BGInfo which tacks real-time system information to your desktop wallpaper when you first login. For obvious reasons, having information such as system memory, available hard drive space and system up time (among others) right in front of you is very convenient when you are managing several systems. A little known feature about this handy utility is the ability to have system information automatically saved to a SQL database or some other data file. With a few minutes of setup work you can easily configure BGInfo to record system information of all your network computers in a centralized storage location. You can then use this data to monitor or report on these systems however you see fit. BGInfo Setup If you are familiar with BGInfo, you can skip this section. However, if you have never used this tool, it takes just a few minutes to setup in order to capture the data you are looking for. When you first open BGInfo, a timer will be counting down in the upper right corner. Click the countdown button to keep the interface up so we can edit the settings. Now edit the information you want to capture from the available fields on the right. Since all the output will be redirected to a central location, don’t worry about configuring the layout or formatting. Configuring the Storage Database BGInfo supports the ability to store information in several database formats: SQL Server Database, Access Database, Excel and Text File. To configure this option, open File > Database. Using a Text File The simplest, and perhaps most practical, option is to store the BGInfo data in a comma separated text file. This format allows for the file to be opened in Excel or imported into a database. To use a text file or any other file system type (Excel or MS Access), simply provide the UNC to the respective file. The account running the task to write to this file will need read/write access to both the share and NTFS file permissions. When using a text file, the only option is to have BGInfo create a new entry each time the capture process is run which will add a new line to the respective CSV text file. Using a SQL Database If you prefer to have the data dropped straight into a SQL Server database, BGInfo support this as well. This requires a bit of additional configuration, but overall it is very easy. The first step is to create a database where the information will be stored. Additionally, you will want to create a user account to fill data into this table (and this table only). For your convenience, this script creates a new database and user account (run this as Administrator on your SQL Server machine): @SET Server=%ComputerName%.@SET Database=BGInfo@SET UserName=BGInfo@SET Password=passwordSQLCMD -S “%Server%” -E -Q “Create Database [%Database%]“SQLCMD -S “%Server%” -E -Q “Create Login [%UserName%] With Password=N’%Password%’, DEFAULT_DATABASE=[%Database%], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF”SQLCMD -S “%Server%” -E -d “%Database%” -Q “Create User [%UserName%] For Login [%UserName%]“SQLCMD -S “%Server%” -E -d “%Database%” -Q “EXEC sp_addrolemember N’db_owner’, N’%UserName%’” Note the SQL user account must have ‘db_owner’ permissions on the database in order for BGInfo to work correctly. This is why you should have a SQL user account specifically for this database. Next, configure BGInfo to connect to this database by clicking on the SQL button. Fill out the connection properties according to your database settings. Select the option of whether or not to only have one entry per computer or keep a history of each system. The data will then be dropped directly into a table named “BGInfoTable” in the respective database.   Configure User Desktop Options While the primary function of BGInfo is to alter the user’s desktop by adding system info as part of the wallpaper, for our use here we want to leave the user’s wallpaper alone so this process runs without altering any of the user’s settings. Click the Desktops button. Configure the Wallpaper modifications to not alter anything.   Preparing the Deployment Now we are all set for deploying the configuration to the individual machines so we can start capturing the system data. If you have not done so already, click the Apply button to create the first entry in your data repository. If all is configured correctly, you should be able to open your data file or database and see the entry for the respective machine. Now click the File > Save As menu option and save the configuration as “BGInfoCapture.bgi”.   Deploying to Client Machines Deployment to the respective client machines is pretty straightforward. No installation is required as you just need to copy the BGInfo.exe and the BGInfoCapture.bgi to each machine and place them in the same directory. Once in place, just run the command: BGInfo.exe BGInfoCapture.bgi /Timer:0 /Silent /NoLicPrompt Of course, you probably want to schedule the capture process to run on a schedule. This command creates a Scheduled Task to run the capture process at 8 AM every morning and assumes you copied the required files to the root of your C drive: SCHTASKS /Create /SC DAILY /ST 08:00 /TN “System Info” /TR “C:\BGInfo.exe C:\BGInfoCapture.bgi /Timer:0 /Silent /NoLicPrompt” Adjust as needed, but the end result is the scheduled task command should look something like this:   Download BGInfo from Sysinternals Latest Features How-To Geek ETC How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? How to Use and Master the Notoriously Difficult Pen Tool in Photoshop HTG Explains: What Are the Differences Between All Those Audio Formats? How To Use Layer Masks and Vector Masks to Remove Complex Backgrounds in Photoshop Bring Summer Back to Your Desktop with the LandscapeTheme for Chrome and Iron The Prospector – Home Dash Extension Creates a Whole New Browsing Experience in Firefox KinEmote Links Kinect to Windows Why Nobody Reads Web Site Privacy Policies [Infographic] Asian Temple in the Snow Wallpaper 10 Weird Gaming Records from the Guinness Book

  Read the article

• How can I get my progress reviewed as a solo junior developer

  - by Oliver Hyde

  I am currently working for a 2 person company, as the solo primary developer. My boss gets the clients, mocks up some png design templates and hands them over to me. This system has been working fine and i'm really enjoying it. The types of projects I work on are for small - medium sized businesses and they usually want a CMS system. Developed from scratch i'll build a customised backend for the client to add/edit/remove categories, tags, products etc and then output them to the front end according to the design template handed to me. As time has gone on, the projects have increased in complexity, with shopping cart / ordering features and other common e-commerce type features. Again, this system has been working fine and i'm really enjoying it. My issue is my personal development as a programmer. I spend a lot of my spare time reading programming blogs, checking through stackexchange, reading suggested programming books (currently on 'The Pragmatic Programmer', really good so far), doing brain exercises (lumosity.com and khanacademy math problems), doing lots of physical exercise and other personal development type activities. I can't help but feel though, that I'm missing out on feedback, critique. My boss is great and never holds back on praise in regards to my work, but he unfortunately is either to busy to check my code, or to be honest, I don't think it's one of his specialties and so can't provide feedback. I want to know what i'm doing wrong and what i'm doing right. Should I be putting that much logic in the controller, am I modulating my code enough etc. So what I have done is developed a little 'Family Budgeting' app and tried to do it as cleanly and effectively as I currently know how. What i'm wanting to know is, is there somewhere I can submit this app, and have some seasoned developers provide feedback. It's not just a subsection of my code like 'codereview.stackexchange' appears to require, it's my entire workflow that I want critiqued. I know this is a lot to ask, and I expect the main advice given will be to look for a job within a team, which is certainly something I will look into later down the track, but for now I want to persist with my current employment situation, but just don't want to develop too many bad habits. Let me know if I can provide any further information to help clarify, or if this isn't the right place for this type of question I apologise in advance. Didn't want to use reddit as I felt this community fosters more well thought out responses.

  Read the article

• how to reinstall/repair ubuntu 12.04 after dual boot installation fails with windows 7

  - by Rini

  I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio s series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. I looked in to /var/log/syslog but not able to understand what is error. Then, I ran sudo fdisk -l to view my partitions and it shows me only one partition. Probably, all the partitions I created for Ubuntu 12.04 are lost while running windows 7 recovery CD. So, I don't know whether the Ubuntu is still there or probably corrupted. My boot-info URL is: http://paste.ubuntu.com/1202146/ Please tell me how to remove this error so that I can reinstall/repair Ubuntu 12.04 Thanks in advance. R Shukla My boot-info URL is: http://paste.ubuntu.com/1202146/ Please tell me how to remove this error so that I can reinstall/repair Ubuntu 12.04 Thanks for your help! I tried to boot from the CD but I every time it give me error before disk partitioning step. Also, I am unable to start Gparted. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. I looked in to /var/log/syslog but not able to understand what is error. Then, I ran sudo fdisk -l to view my partitions and it shows me only ne partition. Probaply, all the partitions I created for Ubuntu 12.04 are lost while running windows 7 recovery CD. Please tell me how to remove this error. Best Regards, R S

  Read the article

• Google I/O 2012 - Building High Performance Mobile Web Applications

  Google I/O 2012 - Building High Performance Mobile Web Applications Ryan Fioravanti Learn what it takes to build an HTML5 mobile app that will wow your users. This session will focus on speed, offline support, UI layouts, and the tools necessary to set up a productive development environment. Come to this session if you're looking to make a killer mobile web app that stands out amongst the competition. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 33 0 ratings Time: 49:43 More in Science & Technology

  Read the article

• Play a New Random Game Each Day in Chrome

  - by Asian Angel

  Being able to unwind for a few moments each day can make the time pass so much better and help you feel refreshed. If your favorite method for relaxing is playing a quick game, then join us as we take a look at the Random Games from MyGiochi.net extension for Google Chrome. Random Games from MyGiochi.net in Action The really great thing about this extension is that each day you can have a new random game to play. If you love variety this is definitely going to be a perfect match for you. We got “Power Golf” as our random game of the day. Here is a look at things once we got started…this one can be a lot of fun to play. Time to move on to the third hole now… What if you want something different from the game available on any given day? In the upper right corner you will find links for “game categories” that you can look through (clicking on the links will open a new tab). Since the links are in Italian you might need to experiment a little bit to find the category that you want to browse through. We chose the “Games for Girls Category”. With Chrome’s new built in “Translation Bar” you can easily switch the page over to the language of your choice. Note: Translation Bar available in Dev Channel releases. Ready to choose a fun game to play! You really can have a lot of fun with the games available at My Giochi. With our “game of the day” we had a second option for other games to try. More games equals more fun! Conclusion If playing online games is your favorite way to relax then the MyGiochi.net extension will make a great addition to your browser. Have fun with all of those new games each day! Links Download the Random Games from MyGiochi.net extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Geek Fun: Play Alien Arena the Free FPS GamePlay Avalanche!! in Google ChromeFriday Fun: Get Your Mario OnFriday Fun: Play Bubble QuodFriday Fun: 13 Days in Hell TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet

  Read the article

• Query Tuning Mastery at PASS Summit 2012: The Demos

  - by Adam Machanic

  For the second year in a row, I was asked to deliver a 500-level "Query Tuning Mastery" talk in room 6E of the Washington State Convention Center, for the PASS Summit. ( Here's some information about last year's talk, on workspace memory. ) And for the second year in a row, I had to deliver said talk at 10:15 in the morning, in a room used as overflow for the keynote, following a keynote speaker that didn't stop speaking on time. Frustrating! Last Thursday, after very, very quickly setting up and...(read more)

  Read the article

• No sound in Ubuntu except at log in

  - by Mohd Arafat Hossain

  I installed Ubuntu 12.04 a month ago and am using it till now. I failed to notice that all this time there was no sound at all while running Ubuntu, even while playing a game in Wine. The weird thing is that only the startup sound comes when I log in (Indian/African drum tone), then comes the utter silence. I tested both Digital Output (S/PDIF) and the speakers in the sound settings but can hear nothing. Any help?

  Read the article

• Beginner’s Guide to Flock, the Social Media Browser

  - by Asian Angel

  Are you wanting a browser that can work as a social hub from the first moment that you start it up? If you love the idea of a browser that is ready to go out of the box then join us as we look at Flock. During the Install Process When you are installing Flock there are two install windows that you should watch for. The first one lets you choose between the “Express Setup & Custom Setup”. We recommend the “Custom Setup”. Once you have selected the “Custom Setup” you can choose which of the following options will enabled. Notice the “anonymous usage statistics” option at the bottom…you can choose to leave this enabled or disable it based on your comfort level. The First Look When you start Flock up for the first time it will open with three tabs. All three are of interest…especially if this is your first time using Flock. With the first tab you can jump right into “logging in/activating” favorite social services within Flock. This page is set to display each time that you open Flock unless you deselect the option in the lower left corner. The second tab provides a very nice overview of Flock and its’ built-in social management power. The third and final page can be considered a “Personal Page”. You can make some changes to the content displayed for quick and easy access and/or monitoring “Twitter Search, Favorite Feeds, Favorite Media, Friend Activity, & Favorite Sites”. Use the “Widget Menu” in the upper left corner to select the “Personal Page Components” that you would like to use. In the upper right corner there is a built-in “Search Bar” and buttons for “Posting to Your Blog & Uploading Media”. To help personalize the “My World Page” just a bit more you can even change the text to your name or whatever best suits your needs. The Flock Toolbar The “Flock Toolbar” is full of social account management goodness. In order from left to right the buttons are: My World (Homepage), Open People Sidebar, Open Media Bar, Open Feeds Sidebar, Webmail, Open Favorites Sidebar, Open Accounts and Services Sidebar, Open Web Clipboard Sidebar, Open Blog Editor, & Open Photo Uploader. The buttons will be “highlighted” with a blue background to help indicate which area you are in. The first area will display a listing of people that you are watching/following at the services shown here. Clicking on the “Media Bar Button” will display the following “Media Slider Bar” above your “Tab Bar”. Notice that there is a built-in “Search Bar” on the right side. Any photos, etc. clicked on will be opened in the currently focused tab below the “Media Bar”. Here is a listing of the “Media Streams” available for viewing. By default Flock will come with a small selection of pre-subscribed RSS Feeds. You can easily unsubscribe, rearrange, add custom folders, or non-categorized feeds as desired. RSS Feeds subscribed to here can be viewed combined together as a single feed (clickable links) in the “My World Page”. or can be viewed individually in a new tab. Very nice! Next on the “Flock Toolbar is the “Webmail Button”. You can set up access to your favorite “Yahoo!, Gmail, & AOL Mail” accounts from here. The “Favorites Sidebar” combines your “Browser History & Bookmarks” into one convenient location. The “Accounts and Services Sidebar” gives you quick and easy access to get logged into your favorite social accounts. Clicking on any of the links will open that particular service’s login page in a new tab. Want to store items such as photos, links, and text to add into a blog post or tweet later on? Just drag and drop them into the “Web Clipboard Sidebar” for later access. Clicking on the “Blog Editor Button” will open up a separate blogging window to compose your posts in. If you have not logged into or set up an account yet in Flock you will see the following message window. The “Blogging Window”…nice, simple, and straightforward. If you are not already logged into your photo account(s) then you will see the following message window when you click on the “Photo Uploader Button”. Clicking “OK” will open the “Accounts and Services Sidebar” with compatible photo services highlighted in a light yellow color. Log in to your favorite service to start uploading all those great images. After Setting Up Here is what our browser looked like after setting up some of our favorite services. The Twitter feed is certainly looking nice and easy to read through… Some tweaking in the “RSS Feeds Sidebar” makes for a perfect reading experience. Keeping up with our e-mail is certainly easy to do too. A look back at the “Accounts and Services Sidebar” shows that all of our accounts are actively logged in (green dot on the right side). Going back to our “My World Page” you can see how nice everything looks for monitoring our “Friend Activity & Favorite Feeds”. Moving on to regular browsing everything is looking very good… Flock is a perfect choice for anyone wanting a browser and social hub all built into a single app. Conclusion Anyone who loves keeping up with their favorite social services while browsing will find using Flock to be a wonderful experience. You literally get the best of both worlds with this browser. Links Download Flock The Official Flock Extensions Homepage The Official Flock Toolbar Homepage Similar Articles Productive Geek Tips Add Color Coding to Windows 7 Media Center Program GuideAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow to use an ISO image on Ubuntu LinuxAdvertise on How-To GeekFixing When Windows Media Player Library Won’t Let You Add Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• SQL SERVER – Core Concepts – Elasticity, Scalability and ACID Properties – Exploring NuoDB an Elastically Scalable Database System

  - by pinaldave

  I have been recently exploring Elasticity and Scalability attributes of databases. You can see that in my earlier blog posts about NuoDB where I wanted to look at Elasticity and Scalability concepts. The concepts are very interesting, and intriguing as well. I have discussed these concepts with my friend Joyti M and together we have come up with this interesting read. The goal of this article is to answer following simple questions What is Elasticity? What is Scalability? How ACID properties vary from NOSQL Concepts? What are the prevailing problems in the current database system architectures? Why is NuoDB  an innovative and welcome change in database paradigm? Elasticity This word’s original form is used in many different ways and honestly it does do a decent job in holding things together over the years as a person grows and contracts. Within the tech world, and specifically related to software systems (database, application servers), it has come to mean a few things - allow stretching of resources without reaching the breaking point (on demand). What are resources in this context? Resources are the usual suspects – RAM/CPU/IO/Bandwidth in the form of a container (a process or bunch of processes combined as modules). When it is about increasing resources the simplest idea which comes to mind is the addition of another container. Another container means adding a brand new physical node. When it is about adding a new node there are two questions which comes to mind. 1) Can we add another node to our software system? 2) If yes, does adding new node cause downtime for the system? Let us assume we have added new node, let us see what the new needs of the system are when a new node is added. Balancing incoming requests to multiple nodes Synchronization of a shared state across multiple nodes Identification of “downstate” and resolution action to bring it to “upstate” Well, adding a new node has its advantages as well. Here are few of the positive points Throughput can increase nearly horizontally across the node throughout the system Response times of application will increase as in-between layer interactions will be improved Now, Let us put the above concepts in the perspective of a Database. When we mention the term “running out of resources” or “application is bound to resources” the resources can be CPU, Memory or Bandwidth. The regular approach to “gain scalability” in the database is to look around for bottlenecks and increase the bottlenecked resource. When we have memory as a bottleneck we look at the data buffers, locks, query plans or indexes. After a point even this is not enough as there needs to be an efficient way of managing such large workload on a “single machine” across memory and CPU bound (right kind of scheduling)  workload. We next move on to either read/write separation of the workload or functionality-based sharing so that we still have control of the individual. But this requires lots of planning and change in client systems in terms of knowing where to go/update/read and for reporting applications to “aggregate the data” in an intelligent way. What we ideally need is an intelligent layer which allows us to do these things without us getting into managing, monitoring and distributing the workload. Scalability In the context of database/applications, scalability means three main things Ability to handle normal loads without pressure E.g. X users at the Y utilization of resources (CPU, Memory, Bandwidth) on the Z kind of hardware (4 processor, 32 GB machine with 15000 RPM SATA drives and 1 GHz Network switch) with T throughput Ability to scale up to expected peak load which is greater than normal load with acceptable response times Ability to provide acceptable response times across the system E.g. Response time in S milliseconds (or agreed upon unit of measure) – 90% of the time The Issue – Need of Scale In normal cases one can plan for the load testing to test out normal, peak, and stress scenarios to ensure specific hardware meets the needs. With help from Hardware and Software partners and best practices, bottlenecks can be identified and requisite resources added to the system. Unfortunately this vertical scale is expensive and difficult to achieve and most of the operational people need the ability to scale horizontally. This helps in getting better throughput as there are physical limits in terms of adding resources (Memory, CPU, Bandwidth and Storage) indefinitely. Today we have different options to achieve scalability: Read & Write Separation The idea here is to do actual writes to one store and configure slaves receiving the latest data with acceptable delays. Slaves can be used for balancing out reads. We can also explore functional separation or sharing as well. We can separate data operations by a specific identifier (e.g. region, year, month) and consolidate it for reporting purposes. For functional separation the major disadvantage is when schema changes or workload pattern changes. As the requirement grows one still needs to deal with scale need in manual ways by providing an abstraction in the middle tier code. Using NOSQL solutions The idea is to flatten out the structures in general to keep all values which are retrieved together at the same store and provide flexible schema. The issue with the stores is that they are compromising on mostly consistency (no ACID guarantees) and one has to use NON-SQL dialect to work with the store. The other major issue is about education with NOSQL solutions. Would one really want to make these compromises on the ability to connect and retrieve in simple SQL manner and learn other skill sets? Or for that matter give up on ACID guarantee and start dealing with consistency issues? Hybrid Deployment – Mac, Linux, Cloud, and Windows One of the challenges today that we see across On-premise vs Cloud infrastructure is a difference in abilities. Take for example SQL Azure – it is wonderful in its concepts of throttling (as it is shared deployment) of resources and ability to scale using federation. However, the same abilities are not available on premise. This is not a mistake, mind you – but a compromise of the sweet spot of workloads, customer requirements and operational SLAs which can be supported by the team. In today’s world it is imperative that databases are available across operating systems – which are a commodity and used by developers of all hues. An Ideal Database Ability List A system which allows a linear scale of the system (increase in throughput with reasonable response time) with the addition of resources A system which does not compromise on the ACID guarantees and require developers to learn new paradigms A system which does not force fit a new way interacting with database by learning Non-SQL dialect A system which does not force fit its mechanisms for providing availability across its various modules. Well NuoDB is the first database which has all of the above abilities and much more. In future articles I will cover my hands-on experience with it. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• Friday Fun: Games that Look Like Productivity Apps

  - by Mysticgeek

  We’ve been showing you fun flash games to play during company time on a Friday afternoon. Hopefully while playing them, you haven’t received a “talking to”. Today we show you some cool games to play that look like productivity apps, so the boss will be none the wiser. The website cantyouseeimbusy.com has developed some very neat little games that look like productivity apps like Word and Excel. These apps look exactly like some project you would be working on, but are really neat little games. Here we take a look at three cool ones on the site called Breakdown, Leadership, and Cost Cutter. Leadership Leadership is a cool game that looks like something you would be working in Excel and is a spin off of the classic game Moon Lander. You navigate your ship through a variety of challenging line graphs. Breakdown This one is a knock off of the classic game Break Out. Use your mouse to scroll the racket at the bottom and bounce the ball off of the text in the document. Press the space bar to pause the game and the elements will disappear…good for when the boss comes around. Cost Cutter This one is a puzzle game where it looks like your working on some bar charts in Excel. You need to click combinations of two or more blocks that are the same color. Again, hit the spacebar and the game elements will disappear. If you’re looking for a way to goof off with some simple games without the boss knowing, these will definitely do the trick. Another cool game along these lines is Excit! which we covered previously. Play Cost Cutter, Breakdown, and Leadership at cantyouseeimbusy.com Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Bricks Breaking & Cube CrashFriday Fun: Fancy Pants AdventuresFriday Fun: GemCraft is a Totally Addictive Tower Defense GameFriday Fun: Five More Time Wasting Online Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

  Read the article

• Structuring multi-threaded programs

  - by davidk01

  Are there any canonical sources for learning how to structure multi-threaded programs? Even with all the concurrency utility classes that Java provides I'm having a hard time properly structuring multi-threaded programs. Whenever threads are involved my code becomes very brittle, any little change can potentially break the program because the code that jumps back and forth between the threads tends to be very convoluted.

  Read the article

• PASS Virtual Chapter: Powershell today - Aaron Nelson

  - by dbaduck

  Just a reminder about the Virtual Chapter today at 12:00 Noon Eastern Time we will have a meeting with Aaron Nelson presenting a Grab Bag of Powershell stuff for SQL Server. The link below is the attendee link. This is our regularly scheduled program each month, and the website is http://powershell.sqlpass.org . http://bit.ly/gQJ5PM Hope you can make it. There was standing room only in Aarons SQL PASS presentation in Seattle, so you won't want to miss this if you can make it....(read more)

  Read the article

• Going For Gold: AngloGold Ashanti and Oracle Spatial 11g

  - by stephen.garth

  Last chance - Register Now for Free Webinar Date and Time: Thursday May 6 at 11:00am PDT (2:00pm EDT) Check out this 1-hour Directions Media webinar to learn how the world's 3rd largest gold miner has implemented a unique geospatial data infrastructure based on Oracle Spatial 11g to streamline their business processes for gold exploration. Terry Harbort, Exploration Systems Architect with AngloGold Ashanti, will provide insights into the company's use of Oracle Spatial 11g GeoRaster, 3D visualization techniques, Real Application Clusters, and more. The presentation is followed by a live Q&A session. Register Here

  Read the article

• Unable to update/ install any files [closed]

  - by Surya

  Possible Duplicate: “Problem with MergeList” error when trying to do an update Just now I installed ubuntu 12.04 on my Lenovo G570 laptop. First I got an error at the time of installation (don't know about it) and I restarted the system and next time, it went well. So, after installing problems started.. There was a error with "Language recognition" and I tried to fix it but didn't work. I tried to install powerTop to check the status of power management. at terminal: sudo apt-get install powertop This is the error I got surya@surya-Lenovo-G570:~$ sudo apt-get powertop install [sudo] password for surya: E: Invalid operation powertop surya@surya-Lenovo-G570:~$ sudo apt-get install powertop Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened. surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ I downloaded Google Chrome .deb one and tried to install but its not working. Software center is opened and its not loading. There was a notification on the status bar which says: An error occurred please run the package manager from the right-click menu ... .... ... E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages "Copy & Paste" from terminal is not really working... When I press Ctrl + C; its showing ^C on terminal but its not working.. The most important error: I am unable to see a "chip" icon on the status bar so as to install proprietary drivers for my ATI drivers... The interesting part is, powertop worked will on live cd and it even detected my ATI card. Update When I opened "Software Up to Date", this showed a error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' : My laptop details Lenovo G570; Intel 2nd Gen i5 processor 4GB DDR3 RAM Intel in-build graphics + AMD Radeon HD 6370M 1GB graphics. I need help ASAP.

  Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >