Search Results

Search found 62161 results on 2487 pages for 'set difference'.

Page 650/2487 | < Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657 | Next Page >

Ethernet interface number changed, and old one does not exist, but does not leave IP address

- by Sagar

I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

Read the article
PhpMyAdmin::403 error - don't have permission to enter localhost/phpmyadmin/ on Apache2, Fedora 13

- by George

I am running an apache 2.17 at a Fedora 13. I did install phpmyadmin from the repos (via yum). It is installed in /usr/share/phpMyAdmin. I did make a symlink from my document root to the /user/share/phpMyadmin. I set 755 permsissions on that folder, set it to be owned by user apache and group apache. And yet, when I try to open http://localhost/phpmyadmin, it gives me the 403 error - you do not have permisssion! I tried also commenting some deny lines in the phpMyAdmin.conf file, no success. Any help would be gladly appreciated.

Read the article
Issues with Rsync on a NAS

- by Daniel Fischer

I'm trying to rsync a few external hard drives over to my new Nas DS412+ but I'm noticing it's stupid slow. I'm trying it via mounting the backup folder via afb on a Mac. I was told this may be the wrong way to do it. I recently just turned on "network backup" on the Synology and am now running rsync over ssh like: rsync -ar --progress . admin@localip:/backup/path Is this the right way to do it now? Will it be faster? Is there something else I can do to make it faster? Edit: I'm getting a ton of: "failed to set permissions" "failed to set times" now that I run it. What do I do?

Read the article
TFTP uploads failing

- by dunxd

I am running TFTPD via xinetd on a Centos 5.4 server. I am able to access files via tftp fine, so I know the service is running ok. However, whenever I try and upload a file I get a 0 Permission denied message. I have already created the file in /tftpboot and set the permissions to 666. My tftpd config has verbose logging (-vvvv), but all I see in my /var/log/messages is: START: tftp pid=20383 from=192.168.77.4 I have seen some mention that SELinux can prevent TFTPD uploads, but I'd expect to see something in the logs. I have SELinux set in permissive mode. Any ideas?

Read the article
Forwarding port to a VM - How to?

- by Peter Gadd

I use Win 8 Ent x64 on my PC, and I also have a Win 7 VMware virtual machine set up using a bridged network adapter. The IPv4 number for the Win 7 VM is 192.168.1.115. I require access to the VM from the Internet through port 1688. How do I set up port forwarding to achieve this? My router is a Cisco Linksys WAG120N. ========= If you require any further information to help me with this, I will gladly supply it. ========= Thanks in advance.

Read the article
ADSL Modem Goes Slower Than Dialup

- by peter

Hi All, I have two ADSL modems, the first one does not have wireless, but is configured and working fine at around 6 - 7 mbps (ADSL) on Orcon in New Zealand. I bought a Belkin N150 wireless router to replace the first one. I configured it exactly the same as the first one, but a speed test confirms that it is running slower than dial up. One difference I noticed is that the first modem (a linksys) came from Orcon, and didn't have an ADSL username and password set up. The Belkin modem on the other hand wouldn't let me leave the username and password field blank. Any ideas? I am a techy guy, so it doesn't appear to be anything obvious with the settings I have missed. Thanks.

Read the article
MS SQL Query Sum of subquery

- by San

Hello , I need a help i getting following output from the query . SELECT ARG_CONSUMER, cast(ARG_TOTALAMT as float)/100 AS 'Total', (SELECT SUM(cast(DAMT as float))/100 FROM DEBT WHERE DDATE >= ARG.ARG_ORIGDATE AND DDATE <= ARG.ARG_LASTPAYDATE AND DTYPE IN ('CSH','CNTP','DDR','NBP') AND DCONSUMER = ARG.ARG_CONSUMER ) AS 'Paid' FROM ARGMASTER ARG WHERE ARG_STATUS = '1' Current output is a list of all records... But what i want to achieve here is count of arg consumers Total of ARG_TOTALAMT total of that subquery PAID difference between PAID & Total amount. I am able to achieve first two i.e. count of consumers & total of ARG _ TOTALAMT... but i am confused about sum of of ...i.e. sum (SELECT SUM(cast(DAMT as float))/100 FROM DEBT WHERE DDATE >= ARG.ARG_ORIGDATE AND DDATE <= ARG.ARG_LASTPAYDATE AND DTYPE IN ('CSH','CNTP','DDR','NBP') AND DCONSUMER = ARG.ARG_CONSUMER) AS 'Paid' Please advice

Read the article
Bash vs. Gnu screen : Replace Ctrl-A with Ctrl-Shift-A

- by Stefan Lasiewski

I'm a new user to GNU Screen. I've been using Bash for a very long time, and I want to give GNU Screen a try. As you know, GNU Screen uses 'C-a' (Control-A) as as the command character. Trouble is, this interferes with the Line Editing feature in Bash (and GNU Readline), because Control-A in Bash will Move to the start of the line." I know I can set the Command Character to another key sequence, like "^Q" or "``" (Backtick), but I have trouble finding another key sequence which isn't already in use (^Q is used by the terminal, backtick is used when writing shell scripts). It appears that the Command Character may only be one or two characters in length. Can I set the GNU Screen control character to be something like "Control-Shift-A"? (I can't use more then one hyperlink yet, so I cannot link to the Bash documentation)

Read the article
Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

- by Robert Koritnik

Windows 7 x64 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 R2 doesn't. Event though it's practically the same OS when it comes to drivers. I know there's a very good reason for this difference. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are usually desktop machines (a bit more powerful though) and would benefit from the whole driver spectrum that Windows 7 offers... Question I know I've been reading on the internet about some trick where you first install Windows 7, than do something to get either all Windows 7 drivers or just those installed, and then install Windows Server 2008 R2 and use those drivers of Windows 7. The thing is I can't find these instructions on the internet any more. If anybody knows where they are please provide the link for the rest of us.

Read the article
Selinux interfering with vboxwebsrv or phpvirtualbox

- by Mike W

I have a brand new installation of Fedora 18, with a brand new installation of Virtualbox 4.2. I have spent a painful few hours trying to get phpVirtualBox working. Apache 2.4 and PHP 5.4 are installed, along with the phpVirtualBox software. Attempting to access phpVirtualBox allowed me to login, but then I'd have a prolonged wait until an 'Error fetching HTTP headers' message appeared. Finally, I set SeLinux to permissive, and Bingo! things start to work. For some reason the SeLinux Troubleshooter isn't flagging any messages from SeLinux, I don't know what to look for now. This is a development box so I could leave SeLinux set to permissive but I will need to make this work in anger on the next project. My question, then, is this: What changes to SeLinux policies do I need to make to allow phpVirtualBox and vboxwebsrv to work together? If there's more information I can post that will assist I'll gladly post it - just let me know what it is.

Read the article
Nginx + PHP-FPM executes script, but returns 404

- by MorfiusX

I am using Nginx + PHP-FPM to run a Wordpress based site. I have a URL that should return dynamically generated JSON data for use with the DataTables jQuery plugin. The data is returned properly, but with a return code of 404. I think this is a Nginx config issue, but I haven't been able to figure out why. The script 'getTable.php' works properly on the production version of the site which is currently using Apache. Anyone know how I can get this to work on Nginx? URL: http://dev.iloveskydiving.org/wp-content/plugins/ils-workflow/lib/getTable.php SERVER: CentOS 6 + Varnish (caching disabled for development) + Nginx + PHP-FPM + Wordpress + W3 Total Cache Nginx Config: server { # Server Parameters listen 127.0.0.1:8082; server_name dev.iloveskydiving.org; root /var/www/dev.iloveskydiving.org/html; access_log /var/www/dev.iloveskydiving.org/logs/access.log main; error_log /var/www/dev.iloveskydiving.org/logs/error.log error; index index.php; # Rewrite minified CSS and JS files location ~* \.(css|js) { if (!-f $request_filename) { rewrite ^/wp-content/w3tc/min/(.+\.(css|js))$ /wp-content/w3tc/min/index.php?file=$1 last; expires max; } } # Set a variable to work around the lack of nested conditionals set $cache_uri $request_uri; # Don't cache uris containing the following segments if ($request_uri ~* "(\/wp-admin\/|\/xmlrpc.php|\/wp-(app|cron|login|register|mail)\.php|wp-.*\.php|index\.php|wp\-comments\-popup\.php|wp\-links\-opml\.php|wp\-locations\.php)") { set $cache_uri "no cache"; } # Don't use the cache for logged in users or recent commenters if ($http_cookie ~* "comment_author|wordpress_[a-f0-9]+|wp\-postpass|wordpress_logged_in") { set $cache_uri 'no cache'; } # Use cached or actual file if they exists, otherwise pass request to WordPress location / { try_files /wp-content/w3tc/pgcache/$cache_uri/_index.html $uri $uri/ /index.php?q=$uri&$args; } # Cache static files for as long as possible location ~* \.(xml|ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|css|rss|atom|js|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { try_files $uri =404; expires max; access_log off; } # Deny access to hidden files location ~* /\.ht { deny all; access_log off; log_not_found off; } location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; include /etc/nginx/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_intercept_errors on; fastcgi_pass unix:/var/lib/php-fpm/php-fpm.sock; # port where FastCGI processes were spawned } } Fast CGI Params: fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; UPDATE: Upon further digging, it looks like Nginx is generating the 404 and PHP-FPM is executing the script properly and returning a 200. UPDATE: Here are the contents of the script: <?php /** * Connect to Wordpres */ require(dirname(__FILE__) . '/../../../../wp-blog-header.php'); /** * Define temporary array */ $aaData = array(); $aaData['aaData'] = array(); /** * Execute Query */ $query = new WP_Query( array( 'post_type' => 'post', 'posts_per_page' => '-1' ) ); foreach ($query->posts as $post) { array_push( $aaData['aaData'], array( $post->post_title ) ); } /** * Echo JSON encoded array */ echo json_encode($aaData);

Read the article
Setting the view of the toolbar to Large icons creates a gap in the Windows 7's taskbar

- by Boris

If you add a custom toolbar in the Windows 7 taksbar and set the toolbar view to Large Icons (and the icons in the toolbar are not set to Use small icons), the height of the taskbar unexpectedly increases by around 5 pixels, which makes a rather stupid gap at the bottom of the screen. If the option Use small icons is used for the taskbar appearance, the height of the taskbar is normal. It appears that the programmers at Microsoft were not very meticulous while designing the Windows 7 UI; it is obviously a bug. I was wondering if there is a registry hack to fix this or if anyone knows any solution to the problem, except for the obvious one: "use the small icons"? Thanks.

Read the article
Bind DHCP Server to Network Bridge

- by Luke

My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

Read the article
Purpose of "computer" section in MySQL Cluster 7.2?

- by dpk

According to the cluster documentation, you can either define data nodes with: [ndbd] NodeId=n HostName=1.2.3.4 or [ndbd] NodeId=n ExecuteOnComputer=m [computer] Id=m HostName=1.2.3.4 I don't see a substantial difference between the two. The documentation has this to say: The [computer] section has no real significance other than serving as a way to avoid the need of defining host names for each node in the system. I'm stumped. If I have to define a hostname, what benefit is there to defining it in [computer] instead of [ndbd]?

Read the article
Cannot install any Feature/Role on Windows 2008 R2 Standard

- by Parsa

I was trying to install Exchange 2010 prerequisites, when I encountered some error. All look like the same. Like this one: Error: Installation of [Windows Process Activation Service] Configuration APIs failed. the server needs to be restarted to undo the changes. My server is running Windows Server 2008 R2 Standard Edition. UPDATE: I tried installing the prerequisites one by one using PowerShell. Now I have errors on RPC over Http proxy: Installation of [Web Server (IIS)] Tracing Failed, Attempt to install tracing failed with error code 0x80070643. Fatal error during installation. Searching about the error code doesn't tell me much more than something went wrong when trying to update windows. Installing Http Tracing alone also doesn't make any difference.

Read the article
Access internal IP using public IP

- by willvv

Hi, I have a DSL modem with a public IP address (201.206.x.x), and I have a web server in my internal network (192.168.0.50). I set up the modem to forward requests to port 80 to my web server, so, if I access 201.206.x.x from outside my network, it shows my web page, the same happens if I access 192.168.0.50 from a computer inside my network. Now, the problem is when I try to access 201.206.x.x from my internal network, the browser tries to connect to the DSL modem configuration, instead of redirecting my request to my Web server. Which settings do I have to change in the modem to set up this redirection? Thanks!

Read the article
Setting up a fileserver, some questions?

- by Tanax

Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

Read the article
Setting up a fileserver, some questions?

- by Tanax

Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

Read the article
customErrors="RemoteOnly" not working properly in Server 2008

- by Atomiton

It would appear that on my brand new Windows Server 2008 with IIS7, customErrors is not working. We have customErrors set to RemoteOnly in the web.config on our Asp.Net sites and applications. However, no matter what we do, it would appear that our sites act like it's set to On and we can't get any detailed messages showing up on our applications when remoted into our servers. I'm not entirely sure how to trace where this is being overrided, or if there is something in the way the server is configured that would make the server think the request is internal? How does this actually resolve correctly, anyway? Any help is appreciated... Our network admin has added domains to our hosts file to direct applications to the IP address.

Read the article
Upgrade MySQL on Plesk on Windows

- by Cyril Gupta

I just got a nasty surprise when I installed a website in Unicode Hindi (Indian language) on a server, all freshly entered unicode data is turning into question marks on the server. On my dev machine it works perfectly. I found that I have MySQL version 5.0.45 (installed in default by Plesk I guess). On my dev machine i have version 5.1.33. I believe the problem could be due to the version difference. The new version of MySQL apparently has better support for Unicode than the older one. I want to upgrade MySQL on my Windows Server machine with Plesk installed on it I am reluctant to just install the new version using the mysql installer because Plesk maintains some custom settings for mysql and I am afraid the new version could change those settings and break my db. Can anyone tell me do I have to do anything special to install MySQL on plesk on windows or can I just use the new version installer?

Read the article
How to specify file permission when putting a file using OpenSSH sftp command

- by Adi Roiban

I am using various SFTP clients for uploading files to an SFTP server and I have a problem with default permission used when putting files. When requesting to put a file, SFTP client like WinSCP or Filezilla will send the SSH_OPEN command without requesting any explicit file permission. On the other side, it looks like the OpenSSH sftp command on Linux (Red Hat and Ubuntu) is pending the SSH_OPEN command together with the '640' mode. How can I configure the OpenSSH command to not explictly set the file mode or how can I configure it to send a mode, other than 640? Many thanks! Update: I checked the OpenSSH sftp client source code and it looks like OpenSSH sftp will always tries to preserve file mode even if -P is not set: http://www.koders.com/c/fidD3B20680F615B33ACCB42398FAAFEE1C007DF942.aspx?s=rsa#L986 To solve this problem I used Putty SFTP client.

Read the article
Use alternative Active Directory server to gain administrative privileges

- by Sharuzzaman Ahmat Raslan

I have this idea, just want to see if it is implementable or not. Let say I have my office laptop, with no administrator privileges, using example domain ASDF Can I set at my home, another AD server (Microsoft or Samba 4), that have the same domain ASDF as my office laptop. Then I set an administrative user in my own AD server. Theoretically, is it possible to authenticate my office laptop with my own AD? If the above is possible, theoretically, is it possible to gain administrative privileges also with this setup? Thanks.

Read the article
MySQL open files limit

- by Brian

This question is similar to set open_files_limit, but there was no good answer. I need to increase my table_open_cache, but first I need to increase the open_files_limit. I set the option in /etc/mysql/my.cnf: open-files-limit = 8192 This worked fine in my previous install (Ubuntu 8.04), but now in Ubuntu 10.04, when I start the server up, open_files_limit is reported to be 1710. That seems like a pretty random number for the limit to be clipped to. Anyway, I tried getting around it by adding a line like this in /etc/security/limits.conf: mysql hard nofile 8192 I also tried adding this to the pre-start script in mysql's upstart config (/etc/init/mysql.conf): ulimit -n 8192 Obviously neither of those things worked. So where is the hoop that has been added between Ubuntu 8.04 and 10.04 through which I must jump in order to actually increase the open files limit?

Read the article
Nginx location issue

- by dave

I'm trying to set a longer (30 day) 'expires' header for my (images only) in the /misc-stuff/ directory. This is what I'm using for my site : # Serve static files directly from nginx location ~* \.(jpg|jpeg|gif|png|bmp|ico|pdf|flv|swf|exe|html|htm|txt|css|js) { add_header Cache-Control public; add_header Cache-Control must-revalidate; expires 7d; } I want to be able to keep that code in to handle regular site images, but create a new block to handle the /misc-stuff/ directory. I have tried : location ^~ /misc-stuff/ { ... } The problem I'm having now is that my backup .php files in that directory show up as plain text if someone tries to access it. How do I set it up so ONLY .gif images in the /misc-stuff/ directory are effected?

Read the article
Simple Workstation Imaging Solution?

- by user23087

I need a fairly cheap imaging solution for Windows XP corporate desktops. Ideally, I'd be able to set up a desktop exactly as we want it, create an image, deploy this image to a server, then boot a new desktop to a CD/USB Drive/Network and quickly set up the workstation. Ideally, each computer would also have a unique workstation name. Any ideas? Right now I'm using a custom built Linux DD solution, but it's slow, not network-based, can't image multiple computers at the same time as there's only one copy on a USB drive, and can't uniquely name the computers. Thanks, Will

Read the article

< Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657 | Next Page >