Search Results

Search found 34532 results on 1382 pages for 'different'.

Page 663/1382 | < Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >

• Network monitoring solution

  - by Hellfrost

  Hello Serverfault ! I have a big distributed system I need to monitor. Background: My system is comprised of two servers, concentrating and controlling the system. Each server is connected to a set of devices (some custom kind of RF controllers, doesnt matter to my question), each device connects to a network switch, and eventually all devices talk to the servers, the protocol between the servers and the devices is UDP, usually the packets are very small, but there are really a LOT of packets. the network is also somewhat complex, and is deployed on a large area physically. i'll have 150-300 of these devices, each generating up to 100+ packets per second, and several network switches, perhaps on 2 different subnets. Question I'm looking for some solution that will allow me to monitor all this mess, how many packets are sent, where, how do they move through the network, bandwidth utilization, throughput, stuff like that. what would you recommend to achieve this? BTW Playing nice with windows is a requirement.

  Read the article

• When are Bold/Italic Fonts Used in Windows?

  - by Otaku

  Environment: Windows 7, MS Office 2007, OpenOffice In the Control Panel-Fonts section, there are a number of fonts available, sometimes as families. For example, the Arial family (double click on it) shows both Arial and Arial Narrow. The Arial one has a few different versions, like "Arial Bold" and "Arial Bold Italic" and "Arial Italic". The Cambria font is the similar. When, if at all, are these Bold, Italic, etc. versions of these fonts ever used? In MS Office and OpenOffice they they are not available to choose from. Any insights on if I even need to keep them on my system at all?

  Read the article

• Excel trendline accuracy

  - by Rook

  This is a problem I have every once in a while, and it annoys me tremendously, beacuse I have always to recheck every trendline I get. An example: r L (mm) 30,00 97,0 60,00 103,2 90,00 106,0 110,00 101,0 125,00 88,0 140,00 62,0 148,00 36,7 152,50 17,0 Upon drawing a trendline (using 3rd order polynomial regression type) with r on the x axis, and L on the y one, Excel will give the formula y = -0,0002x³ + 0,0341x² - 1,8979x + 128,73 with R² = 0,994. If I interpolate values using that formula for the same values of r as the ones the formula was derived from, I get r y (mm) 30,00 97,083 60,00 94,416 90,00 88,329 110,00 66,371 125,00 33,68 140,00 -17,416 148,00 -53,5912 152,50 -76,97725 which are quite different? Why does this happen? What is the reason for it?

  Read the article

• Application Launcher for Hyper-V Server

  - by peterchen

  We are currently in the process of setting up a HyperV R2 Server machine. Though there's not a lot we need to do wihtin the HyperV Server itself, the command line is sure minimalistic. There are a few administrative / Hardware Monitoring tools that we want to run on he machine itself (accessed through remote desktop). I am looking for a simple program/application launcher where we can hook up these maintenance tools (and one to open a new cmd.exe window in case I habitually close the one I'm working in!) However, all tools I tried by now more or less assume explorer is present, and fail in different ways. Before I go and write a simple one myself, any recommendations?

  Read the article

• How to determine which source files are required for an Eclipse run configuration

  - by isme

  When writing code in an Eclipse project, I'm usually quite messy and undisciplined in how I create and organize my classes, at least in the early hacky and experimental stages. In particular, I create more than one class with a main method for testing different ideas that share most of the same classes. If I come up with something like a useful app, I can export it to a runnable jar so I can share it with friends. But this simply packs up the whole project, which can become several megabytes big if I'm relying on large library such as httpclient. Also, if I decide to refactor my lump of code into several projects once I work out what works, and I can't remember which source files are used in a particular run configuration, all I can do it copy the main class to a new project and then keep copying missing types till the new project compiles. Is there a way in Eclipse to determine which classes are actually used in a particular run configuration?

  Read the article

• Forward emails from specific domain in Exchange

  - by neildeadman

  Our Exchange server handles emails for @ourdomain.com (for example). We have multiple clients that will send emails to our [email protected] email address and we want to configure server-side rules that will forward emails from each client's domain to a different email address within our exchange server. For example: [email protected] sends an email to [email protected] and we forward it to [email protected] [email protected] sends an email to [email protected] and we forward it to [email protected] ...and so on. It would be nice if we can additionally stop the email arriving in the [email protected] mailbox, but that is not a specific requirement. We have a rule setup in Outlook that sort of works, but it doesn't do all from a domain only specific email addresses. It does work when Outlook is not running which is a start. I realise it would be easier to give each client a partiuclar email address and have them email straight to that rather than all use the same, but this is what I have been asked to setup.... :S

  Read the article

• Error running phusion passenger in standalone mode

  - by msidell

  I'm trying to run standalone phusion passenger so that I can run different ruby rvm configurations on the same host. I already have ruby and passenger running fine on this host. I am following the instructions here. When I run standalone passenger the first time, it appears to successfully install nginx. But then when it tries to run, I get this error: [root@clark directra]# passenger start -a 127.0.0.1 -p 3001 -d --user dweb *** ERROR *** Could not start Passenger Nginx core: nginx: [alert] could not open error log file: open() "/tmp/passenger-standalone.16757/logs/error.log" failed (2: No such file or directory) nginx: [alert] Unable to start the Phusion Passenger watchdog (/var/lib/passenger-standalone/3.0.11-x86-ruby1.9.3-linux-gcc4.1.2-1002/support/ agents/PassengerWatchdog): Permission denied (13) (13: Permission denied) Stopping web server... done FWIW, /tmp is writeable. Any idea what's wrong?

  Read the article

• IIS site hacked with ww.robint.us malware

  - by sucuri

  A bunch of IIS sites got hacked with a javascript malware pointing to ww.robint.us/u.js. Google cache says more than 1,000,000 different pages got affected: http://www.google.com/#hl=en&source=hp&q=http%3A%2F%2Fww.robint.us%2Fu.js http://blog.sucuri.net/2010/06/mass-infection-of-iisasp-sites-robint-us.html My question is: Did anyone here got hacked with that and still have any logs (or network dump) available for analysis? If you do, have you spotted anything interesting in there? Sites as big as wsj.com got hacked and some people are saying that maybe a zero-day on IIS/ASP.net is in the wild...

  Read the article

• How GZipped contents are transfered on the web?

  - by PJ

  I heard that static contents like CSS and JavaScript can be better delivered in GZip format. And Content Developer Network (CDN) always does so. However I don't understand how the format works. First when I tried making a gzipped file via command-line. The file extension is .gz. This is different from .css and .js. How do browsers recognize which file is gzipped or not. Second, how browsers "decompress" files? I dragged my index.html.gz onto my browsers. But no one worked. How do such gzipped work in the real world? What do I need to do if I want to serve CSS/JavaScript using Gzipped format.

  Read the article

• How can I check whether a volume is mounted where it is supposed to be using Python?

  - by Ben Hymers

  I've got a backup script written in Python which creates the destination directory before copying the source directory to it. I've configured it to use /external-backup as the destination, which is where I mount an external hard drive. I just ran the script without the hard drive being turned on (or being mounted) and found that it was working as normal, albeit making a backup on the internal hard drive, which has nowhere near enough space to back itself up. My question is: how can I check whether the volume is mounted in the right place before writing to it? If I can detect that /external-backup isn't mounted, I can prevent writing to it. The bonus question is why was this allowed, when the OS knows that directory is supposed to live on another device, and what would happen to the data (on the internal hard drive) should I later mount that device (the external hard drive)? Clearly there can't be two copies on different devices at the same path! Thanks in advance!

  Read the article

• 32bit Application Memory Usage on 64bit Windows 7

  - by Brian

  I have an early 2012 Macbook Pro with and Intel I7 processor and 16 gigs RAM running Windows 7 Professional 64bit via Bootcamp. I work in Geographical Information Systems as a programmer so most of the applications I am running are 32bit Applications, but tend to use a lot of resources (i.e. ArcGIS, SQL Server Express, Visual Studio, etc.). I have been noticing that when I have multiple instances of either the same 32bit application or different 32bit applications and they are all working on hefty processing tasks, I am still only topping out at about 30% memory use. I understand 32bit applications are limited to less than 4gb RAM, but I assumed that one instance could use its own 4gb while another instance could use another 4gb to take full advantage of all the memory I have installed. Can anyone explain how this works and how I can get my applications to take advantage of all my memory via running multiple instances?

  Read the article

• The security database on the server does not have a computer account for this workstation trust relationship

  - by alex

  I have a Server 2008 machine called OTTO I recently, by mistake, booted up an old machine, also called OTTO (the hardware was unstable, so the new one was set up to take it's place) I shut down the old machine, turned it off, and recycled it (it won't ever be back on) Now, whenever i try to log in to the real OTTO with the domain account (mydomain\Administrator) i get the following error: The security database on the server does not have a computer account for this workstation What can I do to fix this? It doesn't appear in active directory any more I've added it, but I'm guessing this had no effect, due to a different SID I can log in as the local administrator however

  Read the article

• Windows 7 can ping but can't see device on other subnet

  - by user192702

  I have 2 Windows 7 on 2 different subnets but 1 of them is unable to reach a NAS. The topology is as follow. Any idea why this is the case? Is there some Windows settings I need to apply? Subnet 1 - PC 1 - NAS Subnet 2 - PC 2 PC 1 is able to do the following: - Load the admin page on the browser. - Show the NAS under Windows Explorer - Network. - Access the NAS when typed in \\ in Windows Explorer. PC 2 is unable to do any of the above 3. It can however ping the NAS and get a response.

  Read the article

• Windows 7 admin denied access to taskmgr, system32 dir

  - by DotNet Zebra

  I have a Windows 7 (32-bit) box with 2 users, both admins (my wife and I are both developers). My admin account was created during Windows setup, hers was created later. Both accounts are in the same groups, yet we have VERY different permissions. In the beta and RC, both accounts worked identically (RC to RTM was a fresh install on this box, not an upgrade). I have a C:\bin folder with the sysinternals utilities and a bunch of other stuff. Running anything in there or in system32 just works on my account, on hers I get access denied errors (cannot access file or path). If I right click and try Run As Administrator, I still get the same thing!!!

  Read the article

• VPS for Glassfish

  - by Harry Pham

  Our small startup company plan to deploy a web application on Glassfish, I and wonder if some of the experience user out there can answer me couple question. When I shopping for server, I usually look at RAM amount, as GF does required good amount of RAM to run, below are the two sites with significant price different for the same amount of RAM. I wonder why?? Godaddy: http://www.godaddy.com/hosting/virtual-dedicated-servers.aspx?ci=9013 Versus http://entic.net/Servers Does below plan from Godaddy consider good to run GF application. OS: Linux CentOS • RAM: 4 GB • Storage: 60 GB • Bandwidth: 2,000 GB/mo Our web application is a social network, expected to have 2000-4000 users to start with

  Read the article

• Upgrade TFS 2010 build server to support .net 4.5

  - by JustEngland

  What is needed in the tfs 2010 build agent, to build .net 4.5 projects, in tfs 2008 we had to set the MSBuildPath property, but the configuration seems to be different in 2010. I get the following error message. (614): The imported project "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the declaration is correct, and that the file exists on disk. How we handled it in 2008 http://blogs.msdn.com/b/willbar/archive/2009/11/01/building-net-4-0-applications-using-team-build-2008.aspx

  Read the article

• How can I port forward with an airport extreme and a NAT enabled modem?

  - by Jon

  I run an Actiontec HD701D modem with NAT to an Airport extreme base station to laptop etc. As you might expect I get double NAT issues. I tried a lot of different things to forward a port, but no luck. Currently the airport is in bridge mode letting the modem handle the NAT, but still can't forward the port. Also to note: firewall is off on the router, firewall is set to allow the application in OSX 10.6.3 and I did forward the port in the router. No luck.

  Read the article

• Outlook 2010 + Move IMAP PST file = Outlook data file cannot be accessed.

  - by GWB

  I set up a new IMAP account in Outlook 2010. It works but creates IMAP PST file in C:\Users\User\AppData\Local\Microsoft\Outlook. I want the file on my data drive in D:\Users\User\Documents\Outlook Files (the same folder where outlook automatically creates the local Outlook PST. I followed the instructions here to move the IMAP PST. Testing the account (send/receive) works fine, but if I try to manually send an email I get error 0x8004010F Outlook data file cannot be accessed. I've tried repairing the PST using SCANPST (it always finds errors), and deleting and recreating the account but I get the same error. If I move the PST file back, it works again, but this is not ideal. Note: I don't think this is a duplicate of this question as the cause is different and the solution does not help.

  Read the article

• Ubuntu: Is there a good tabbed PDF viewer?

  - by Frank

  Is there a good non-bloated PDF viewer for (Ubuntu) Linux that supports tabs? I don't want to use Acrobat Reader because it is slow and takes much memory, and my computer isn't the fastest. I know the alternative readers evince and foxit, but they don't support opening different PDF files in tabs. (foxit has that feature on Windows, but the Linux version 1.1, which I just tried, doesn't have it.) For evince, I know many people would like this functionality, but they get ridiculed by Ubuntu people (see here), who say that tabs are the task of a window manager. If that is the case, how can I put all evince windows into one in GNOME?

  Read the article

• Can I rebuild degraded RAID1 on a SAS 5 i controller with a larger mirror drive size?

  - by Kenny

  Hi, A drive failed on a Dell SAS 5i controller - see controller bios screengrab: http://imagebin.ca/view/SkZbszA.html The primary is a 160GB 10k sata drive. I added a 250GB 7k rpm drive in the hope that the array would rebuild onto this drive. This did not happen. (assuming that the controller would just operate at the speed of the slowest drive) The controller could see the new drive, but it didn't automatically rebuild the raid1 onto this drive. (my assumption is that it did not do this rebuild as the drive sizes are different). There was an option to add the new drive to the existing raid1 array - but when I tried this a message appeared stating that all data on the array would be lost. (I didn't get a screenshot of this message, I will later) Should the SAS 5i allow me to rebuild the array onto a larger drive? Is the option to add the drive to the array the right way to go? Many thanks!

  Read the article

• Windows 7 - Remote Desktop - multiple credentials

  - by w--

  My home network consists of a couple Windows XP machines and a Windows 7 box. One of the Windows XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, I just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In Windows 7, it seems to store credentials for a box based on machine name. I.e. I can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In Windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box?

  Read the article

• Deploying an application on a windows domain

  - by ALOToverflow

  I'm looking for different ways to deploy, execute and uninstall an application on all machines of a Windows domain. I've did some research on Group Policy Object (GPO) but I'm still looking for other ideas. As I said, I need to deploy the application, run it without the user having to click anything and letting him to control over the machine. Once it's finished running I need to uninstall it and never run it again. Can such things be done with a GPO? Are there any other possibilites on a Windows domain? Thank you

  Read the article

• Is there an application that can do a blue screen effect with a webcam?

  - by Axxmasterr

  Background: This is not the blue screen of death I am speaking of but the process called "Blue Screening" that takes and removes a particular colored background from an image so that it can be superimposed on some other video/still picture. If you have ever seen the weatherman stand in front of the map, then you have seen someone doing a blue screen technique. I would like to be able to capture video from my webcam, then send that video to a blue screen program which removes the white (or other color) from the background and then inserts a background of my own choosing. (think of the dead guy in freejack who was calling from all of the different places on earth) Then once the image is superimposed, I would like to pipe it into Skype for video conferencing. Anyone have a good way to do this?

  Read the article

• Blocking a country (mass iP Ranges), best practice for the actual block

  - by kwiksand

  Hi all, This question has obviously been asked many times in many different forms, but I can't find an actual answer to the specific plan I've got. We run a popular European Commercial deals site, and are getting a large amount of incoming registrations/traffic from countries who cannot even take part in the deals we offer (and many of the retailers aren't even known outside Western Europe). I've identified the problem area to block a lot of this traffic, but (as expected) there are thousands of ip ranges required. My question now (finally!). On a test server, I created a script to block each range within iptables, but the amount of time it took to add the rules was large, and then iptables was unresponsive after this (especially when attempting a iptables -L). What is the most efficient way of blocking large numbers of ip ranges: iptables? Or a plugin where I can preload them efficiantly? hosts.deny? .htaccess (nasty as I'd be running it in apache on every load balanced web server)? Cheers

  Read the article

• How to troubleshoot intermittent and irregular connection errors on home network (preferrably Mac client)

  - by Martin

  Hi, I'm experiencing intermittent connection errors in our home network from two different computers, normally "Connection Reset" when browsing, but also other issues such as very slow throughput. I have approximately a network setup as below: ISP-Cable Modem-Dlink DIR 655 Router-(Ethernet)-Fon Router-Mac/Windows laptop Basically, is there a simple way to monitor the network and detect where issues are coming from? Right now we don't know if it is the Fon router, the Dlink router, the modem or the ISP. As the issue is intermittent, is there a software that regularly traceroutes a set of destinations and tests e.g. throughput, something that can help us figure out where in the chain the errors are introduced? The more automatic network monitor, the better.

  Read the article

< Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >