Search Results

Search found 38064 results on 1523 pages for 'oracle linux'.

Page 667/1523 | < Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >

• Can't ping through default gateway

  - by Andrew G.H.

  I have the following configuration: Routing table on M3 is: Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.3.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0 Routing table on M1 is: Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 So basically M3's gateway is M1, and M1's gateway is M2's wireless internet interface. If I ping 8.8.8.8 from M1, everything is ok, replies are received. Pinging from M1 to M3 and viceversa is also possible. I have configured M1 as gateway trafic forwarder using firestarter package and stopped firewall with it. iptables policies are ACCEPT for everything. Problem: I have tried ping-ing ip 8.8.8.8 from M3 but without success. What could be the source of this problem?

  Read the article

• SSH multi-hop connections with netcat mode proxy

  - by aef

  Since OpenSSH 5.4 there is a new feature called natcat mode, which allows you to bind STDIN and STDOUT of local SSH client to a TCP port accessible through the remote SSH server. This mode is enabled by simply calling ssh -W [HOST]:[PORT] Theoretically this should be ideal for use in the ProxyCommand setting in per-host SSH configurations, which was previously often used with the nc (netcat) command. ProxyCommand allows you to configure a machine as proxy between you local machine and the target SSH server, for example if the target SSH server is hidden behind a firewall. The problem now is, that instead of working, it throws a cryptic error message in my face: Bad packet length 1397966893. Disconnecting: Packet corrupt Here is an excerpt from my ~/.ssh/config: Host * Protocol 2 ControlMaster auto ControlPath ~/.ssh/cm_socket/%r@%h:%p ControlPersist 4h Host proxy-host proxy-host.my-domain.tld HostName proxy-host.my-domain.tld ForwardAgent yes Host target-server target-server.my-domain.tld HostName target-server.my-domain.tld ProxyCommand ssh -W %h:%p proxy-host ForwardAgent yes As you can see here, I'm using the ControlMaster feature so I don't have to open more than one SSH connection per-host. The client machine I tested this with is an Ubuntu 11.10 (x86_64) and both proxy-host and target-server are Debian Wheezy Beta 3 (x86_64) machines. The error happens when I call ssh target-server. When I call it with the -v flag, here is what I get additionally: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /home/aef/.ssh/config debug1: Applying options for * debug1: Applying options for target-server.my-domain.tld debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: auto-mux: Trying existing master debug1: Control socket "/home/aef/.ssh/cm_socket/[email protected]:22" does not exist debug1: Executing proxy command: exec ssh -W target-server.my-domain.tld:22 proxy-host.my-domain.tld debug1: identity file /home/aef/.ssh/id_rsa type -1 debug1: identity file /home/aef/.ssh/id_rsa-cert type -1 debug1: identity file /home/aef/.ssh/id_dsa type -1 debug1: identity file /home/aef/.ssh/id_dsa-cert type -1 debug1: identity file /home/aef/.ssh/id_ecdsa type -1 debug1: identity file /home/aef/.ssh/id_ecdsa-cert type -1 debug1: permanently_drop_suid: 1000 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debian-3 debug1: match: OpenSSH_6.0p1 Debian-3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent Bad packet length 1397966893. Disconnecting: Packet corrupt

  Read the article

• Have Ubuntu auto-connect to wireless AP without logging in

  - by dragonmantank

  We have an ubuntu box set up to do some monitoring but due to the placement are unable to run CAT5 to the box itself. I have an Atheros PCI card that works great as long as someone is logged into Gnome and it doesn't disconnect from the AP during that time. Is there a way to have Ubuntu connect to the AP during boot, and always reconnect if it finds a signal from a specified AP? The box would have a static IP and only connecting to a specific AP using WEP.

  Read the article

• Hugepages not utilized by MySQL 5.0, CentOS 5

  - by TechZilla

  I've set up Hugepages, but i'm not seeing any of them reserved. Have I missed a step, or for some particular reason, is MySQL is unable to utilize the Hugepages? I have not created a mount of hugetlbfs, although from what I read, MySQL would not call pages in such a manner. If I'm wrong, please let me know, as that would be a trivial solution. Almost all my MySQL tables are using InnoDB. NOTE: I created a hugetlbfs, no change as expected. Is it possible that rebooting would rectify this situation? I would not want to go through the procedure, as this is high availability, but would do so if necessary. This is the configurations, which I believe are relevant. /etc/sysctl.conf ... ## Huge Pages vm.nr_hugepages = 4096 vm.hugetlb_shm_group = 27 ## SHM kernel.shmmax = 34359738368 kernel.shmall = 8589934592 ... /etc/security/limits.conf ... mysql soft nofile 12888 mysql hard nofile 51552 @mysql soft memlock unlimited @mysql hard memlock unlimited /etc/my.cnf [mysqld] large-pages ... grep Huge /proc/meminfo HugePages_Total: 4096 HugePages_Free: 4096 HugePages_Rsvd: 0 Hugepagesize: 2048 kB id mysql uid=27(mysql) gid=27(mysql) groups=27(mysql) context=root:system_r:unconfined_t:SystemLow-SystemHigh tail -6 /var/log/mysqld.log InnoDB: HugeTLB: Warning: Failed to allocate 1342193664 bytes. errno 12 InnoDB HugeTLB: Warning: Using conventional memory pool 120808 15:49:25 InnoDB: Started; log sequence number 0 1729804158 120808 15:49:25 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution I would really appreciate any help, I'm completely out of ideas. If I missed any more relevant configs, or diagnostics, please comment and I'll add it to the question.

  Read the article

• Is the /etc/inittab file read top down?

  - by PeanutsMonkey

  When the init process is executed when the kernel has loaded, does it read the /etc/inittab file in a top down approach i.e. it executes each line as it appears in the file. If so and based on my reading and understanding, does this mean that it enters the documented run level and then launch sysinit process or vice versa? For example the common examples I have seen are id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit

  Read the article

• Help debugging Sendmail/Mailman configuration issue

  - by inxilpro

  Hi folks, I'm trying to configure a server with Sendmail and Mailman. I've been getting "Broken pipe" errors for a while, and have slowly been debugging. I fixed some permission issues, and changed the user that Mailman expects to be called from, among other things. Finally, I'd gone through everything I could think of, so I added a new test to see if it's the Mailman script or Sendmail that's causing the problem. Here's the error I'm getting now (stripped of timestamps and identifying information): <-- MAIL FROM:[email protected] Authentication-Warning: xxxxx.org: xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] didn't use HELO protocol --- 250 2.1.0 [email protected]... Sender ok <-- RCPT TO: [email protected] --- 250 2.1.5 [email protected]... Recipient ok <-- DATA --- 354 Enter mail, end with "." on a line by itself [email protected], size=20, class=0, nrcpts=1, msgid=<[email protected]>, proto=SMTP, relay=xxxxxxxxxxxxxx.net [xx.xx.xxx.xxx] --- 250 2.0.0 o6KMg2xZ025804 Message accepted for delivery alias [email protected] => "|/bin/echo foo" SYSERR(root): putbody: write error: Broken pipe 0: fl=0x0, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 1: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 2: fl=0x1, mode=20660: CHR: dev=0/15, ino=776, nlink=1, u/gid=0/0, size=0 3: fl=0x2, mode=140777: SOCK localhost->[[UNIX: /dev/log]] 5: fl=0x0, mode=100600: dev=8/3, ino=486765, nlink=1, u/gid=0/51, size=5 6: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 7: fl=0x8000, mode=100640: dev=8/3, ino=65501, nlink=1, u/gid=0/0, size=12288 8: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 9: fl=0x8000, mode=100640: dev=8/3, ino=65510, nlink=1, u/gid=0/0, size=12288 10: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 11: fl=0x8000, mode=100640: dev=8/3, ino=64814, nlink=1, u/gid=0/51, size=12288 12: fl=0x1, mode=100600: dev=8/3, ino=486767, nlink=1, u/gid=0/51, size=754 13: fl=0x1, mode=10600: FIFO: dev=0/5, ino=7649785, nlink=1, u/gid=0/51, size=0 14: fl=0x0, mode=10600: FIFO: dev=0/5, ino=7649786, nlink=1, u/gid=0/51, size=0 MCI@0x0: NULL MCI@0x0: NULL to="|/bin/echo foo", [email protected] (8/0), delay=00:00:08, xdelay=00:00:00, mailer=prog, pri=30476, dsn=5.0.0, stat=Service unavailable o6KMsnxX025948: DSN: Service unavailable done; delay=00:00:08, ntries=1 The alias in /etc/aliases is: cmtest: "|/bin/echo foo" As you can see, even when trying to pipe to /bin/echo I still get the same error. But I can't for the life of me figure out what else to check. Normal aliases work fine. Any ideas? Thanks!

  Read the article

• Looking for a host based network monitor solution

  - by Ole Martin Handeland

  Hi all! Problem So, my hosting company has a network usage graph for my dedicated server. It seems that one day earlier this month, my network usage suddenly spiked with several hundred megabytes transferred (usually it's in the tens, not hundreds). It was probably me, but i just can't be sure who or what it was. Question So my question is; does anyone know of any host based solution for monitoring network usage that would tell me the client's IP-address, the port/service he/she used? What I don't want I'm just guessing that someone will suggest i use nagios, munin, zabbix, cacti, mrtg - I've also looked at those, but a graph over network usage will not give me the answers I'm looking for. :-) Almost there I've already looked at a lot of monitoring solutions, and I've tried [ntop][http://www.ntop.org/], [darkstat][http://unix4lyfe.org/darkstat/] and others. Darkstat just didn't give me the answers. Although it listed a lot of statistics, and i could list the clients - it doesn't show me the network usage for a particular period. Ntop is by far the best I've seen so far - but i think it mostly shows current network usage, not the historical part. I could run apt-get upgrade and download a whole bunch of software, but not see it in the log afterwards.

  Read the article

• All virtualhosts serving Apache default files

  - by tj111

  I'm trying to configure Apache as an in-network webserver, and am using the sites-available/sites-enabled feature as opposed to just static vhost files. I set up a couple VirtualHosts, all with a unique DocumentRoot, however request for all the VirtualHosts just serve up the "It's Working!" default file. I can't for the life of me figure out why it won't serve the content out of the correct directory. Here's the contents of the virtualhost directive files, let me know if I need to post more. default (note that apache renames this to 000-default in sites-enabled, so it's not an ordering issue) NameVirtualHost *:80 ServerName emp <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName emp DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> billmed <VirtualHost *:80> ServerName billmed.emp ServerRoot /home/empression/Projects/billmed/web/httpdocs <Directory "/home/empression/Projects/billmed/web/httpdocs"> Order Allow,Deny Allow from All </Directory> </VirtualHost> Note that I have DNS zones for both emp and billmed.emp, as well as entries in /etc/hosts. My ultimate goal is to set up this machine as an in-house webserver with a custom tld (emp), but progress has been pretty slow.

  Read the article

• Nginx and automatic updates

  - by Desmond Hume

  I'm on Ubuntu 12.04.1 with unattended-upgrades configured for automatic security updates, and I installed Nginx by first adding deb http://nginx.org/packages/ubuntu/ lucid nginx deb-src http://nginx.org/packages/ubuntu/ lucid nginx to /etc/apt/sources.list file, just as was suggested by the official wiki, and then by sudo apt-get update sudo apt-get install nginx which installed Nginx with all the standard modules. But now I think I could make good use of one or two of the Nginx optional modules, like the gzip precompression module or some security-related one. So far, I see two ways of adding an optional module to Nginx, one is compiling and installing from the source code and the other is described in this article. So, which of the ways should I choose so that automatic updates still run for and apply to Nginx and its optional modules? Or should I create a cron job with a command/script specific for Nginx instead of using unattended-upgrades utility? Can I choose between volume updates and security-only updates to be automatically applied to the standard and optional modules? And finally, is there a possibility to automatically update Nginx's modules on the fly (without any connections having been dropped), like the documentation suggests it's possible with sudo kill -USR2 $( cat /run/nginx.pid ) P.S. Actually I'm not certain if unattended-upgrades utility would automatically update the standard modules in the first place, not enough time has passed since Nginx was installed to say for sure.

  Read the article

• Configure postfix to filter email into hold queue

  - by Ian

  Hey, I would like postfix to send all emails received on SMTP off to an external process, which will decide whether to allow them through as normal, or whether to put them into the hold queue (or another quarantine area), where they have to wait for admin approval. I was thinking of doing this with an after-queue content filter, which uses pipe(8) to run a script on each message, and the script itself will spawn "postsuper -h " if it decides to put the message on hold. Then the admin can do postsuper -d or -r to delete or pass the message on as appropriate. So, my questions are - a) will this work, and b) is this the best way to do it? Would a milter or another type of content filter be a better approach?

  Read the article

• How do I keep gnome-terminal width from changing when I use "reset"

  - by monguin

  When I use reset in gnome-terminal (bash, Ubuntu 9.04), the window width resets, though the height does not. On my personal computer, this does not happen in xterm or konsole. On my work computer (RHEL 5 or maybe 4), this does not happen in any terminals, including gnome-terminal. I assume there is some environment variable that controls this, but my .bashrc at work is hundreds of lines long, so I'm not sure where to look in there.

  Read the article

• Script execution flow stopped?

  - by vijay.shad

  Hi all, Now my script is able to start server, But I am still have some problem with my script. When the start server command is executed, the control does not pass the line and does not execute further of that line. Please tell me what is the problem and how can I get smooth execution of the my script.

  Read the article

• New Coherence 12c White Paper: The Advantages of Coherence on Exalogic

  - by JuergenKress

  This white paper provides you with an overview of both Oracle Coherence and Oracle Exalogic Elastic Cloud, and how businesses can realize even greater benefits from these technologies when they are used in tandem. Get the white paper here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Coherence,OOW,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Do I need to restart my server after editing fstab and mtab?

  - by jaypabs

  I'm just wondering if I need to restart my server after editing fstab and mtab. I changed something in this file manually due to problem with awstats report. I am using ISPConfig 3 with the help of the tutorial from howtoforge. But due to removing/deleting of some account, the configuration of fstab and mtab messed up. I also ask this question at howtoforge forum but until now no one has answered. If you'd like to read my question please visit it here. I tried very hard to fix the problem w/o luck. Update: Here's what happen to my fstab: Before the value was (I omitted the other): /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 So I changed it to the correct path: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none bind,nobootwait 0 0 I also found mtab to have the same value as above that's why I edited it manually. from: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none rw,bind 0 0 to: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none rw,bind 0 0 I edited those value because the correct path of mydomain.com and example.com should be under web2 and web3 folder respectively. As of now the log of example.com is pointed to: /var/www/clients/client1/web2/log when it should be: /var/www/clients/client1/web3/log So I am thinking that this is because of fstab and mtab. Please guide me how to point the log correctly to it's default directory. I explain the scenario one by one at this link. to dawud: Based on your example mount -o remount,noexec /var, should I run mount -o remount,noexec /var/log/ispconfig/httpd/example.com?

  Read the article

• How can I make XAnalogTV fill my screen?

  - by Breakthrough

  I recently installed xscreensaver, as well as the additional/extra screensavers. Many of the OpenGL ones function correctly, going fullscreen as expected. However, for some reason, the XAnalogTV screensaver leaves two "blank" spots on the edges of my screen. If I manually launch XAnalogTV, it displays a window, which it fills correctly. When I maximize the window, the same effect occurs: the window maximizes, but the two edges of the screen are literally "transparent". This effect also occurs when the screensaver is set to fullscreen. For these reasons, I believe the problem may be related to the aspect ratio of the screen. The edges of the screen are literally "ignored", with nothing being drawn there. Specifically, note the transition between the maximized and full-screen screenshots (with the un-drawn whitespace shrinking as the vertical height has been increased). For reference, I am running Xubuntu 12.04 on a Dell Vostro 1520 (Intel P8600, Nvidia 9300M) with a 1440 x 900 display (16:10). I have also set the GetViewPortIsFullOfLies preference to true. Is there any way to force XAnalogTV to fill my entire screen? Relevant screenshots (windowed, maximized, and full-screen, respectively):

  Read the article

• fail2ban block ports rules iptable

  - by J Spen

  I just installed Ubuntu Server 14.04 and don't have much experience with IPtables. I am trying to get a basic setup going where I only accept SSH connections on port 22 and 2222. I actually have that working with no problem using fail2ban ssh. Then I wanted to block all other ports except 423 and 4242 but either method of DROPing all connections that are not listed seems not to work and it blocks me out of everything. Below is the setup that works: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN I tried to change it either to: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN or: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A INPUT -j DROP -A fail2ban-ssh -j RETURN I have noticed that the rules for fail2ban-ssh are automatically added to my iptables on boot because if I save them with iptables-persistant they are entered twice. How do I go about blocking everything accept those 2 ports using fail2ban? Is it a bad fail2ban configuration or do I need to add the fail2ban-ssh -j Return somewhere else in my code.

  Read the article

• Centos Server/MySQL server problem

  - by Jake

  Hello all, I currently run a website we get about 15,000-20,000 hits a day. We currently run a very active forum, that is hosted using Vbulletin software. We have 4.5 Million Posts, 80,000 Threads, with about 11,000 members of which just under a third is active all the time. Now I am running a Intel Xeon Quad Core (2.13Ghz) with 4GB of RAM, Centos 5.5 and running DirectAdmin on the box to manage it. I also run the current stable version of Apache, MySQL, and php. This is the only site that is hosted on this machine. Now during random times of day sometimes when it gets busy the server load can get to like 20, but this can also happen when we only have like 200 users active too. I dont understand what is causing these problems. Sometimes I get pages that can generate in .2 seconds other times it takes like 5-8 seconds. I have customized the my.cnf file and that has not helped out anything, I didnt know where else to turn so if anyone has any suggestions please let me know. Thank You In advance.

  Read the article

• Less Can Be More In E-Commerce

  - by Michael Hylton

  Today’s consumers are inundated with product choices and vendors. Visit your favorite electronics retailer and see the vast assortment of flat panel televisions. Or the variety of detergents at the supermarket. All of this can be daunting for the average consumer who is looking for the products and services that interest them.  In a study titled “Choice is Demotivating: Can One Desire Too Much of a Good Thing”, the author, Sheena Iyengar found that participants actually reported greater subsequent satisfaction with their selections and wrote better essays when their original set of options had been limited. The same can be said for e-commerce and your website. Being able to quickly convert shoppers into buyers with effective merchandising is what makes leading businesses successful. You want to engage each individual visitor with the most-relevant content to drive higher conversions and order values while decreasing abandonment, but predicting what will resonate with each customer is difficult. In a world of choices, online merchandizing tools can help personalize, streamline, and refine what your customers view when they browse your online catalog. The key to being effective is to align your products and content as closely as possible with the customer’s needs. The goal on the home page is to promote your brand and push visitors farther into the site. The home page is often the starting point for repeat customers as well as for new visitors hoping to address their current product needs. As the customer selects different filters and narrows the choices, valuable information is being provided to the retailer about the customer’s current need—regardless of previous search behavior or what other customers with a similar demographic profile have purchased. Together with search pages, category browse pages are among the primary options available to customers as a means of finding products on your site. Once a customer reaches the product detail page, it is clear what that person desires, regardless of the segment the customer falls into. However, don’t disregard campaign-based promotions completely. A campaign targeted to all customers but featuring rule-driven promotions tied to the product can be effective. Click here to learn more about merchandizing techniques so what your customer sees if half full and not half empty.

  Read the article

• No clue for high load average on top

  - by Oz.

  We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

  Read the article

• 284 GiB of data, 217.4 GiB of space

  - by Malfist

  I want to reinstall my OS, but I don't have the hard drive space to backup any more (I have a RAID 1 array, so I haven't done it for a while). In my /home I have 284.8 GiB of data, and I have a spare 250 GB (or 217.4 GiB) hard drive that I've been using for backup. What type of compression algorithm (if any) is capable of this type of compression? I don't care about the time, I have a quad core though, so something that utilizes all 4 cores would be great. I have tried 7zip with no success. Ran on one core for two days and failed because of lack of space. Any ideas?

  Read the article

• How do I test complex expressions with bash?

  - by router

  I can only do simply expressions like 1=1 and 0=1 test 1 = 1 -a 0 = 1 But how to do complex expressions like 1=1 and (0=1 or 1=1) ?

  Read the article

• Makefile fails to install file correctly, installing HPL

  - by zarose

  I started installing HPL a while ago, and had a related question. I've been following along with this guide from Intel. I figure this warrants a whole new one. When I try to make the archive, the output seems fine until the end, where it gives an error. make[2]: Entering directory `/hpl-2.0/src/auxil/intel64' Makefile:47: Make.inc: No such file or directory make[2]: *** No rule to make target `Make.inc'. Stop. make[2]: Leaving directory `/hpl-2.0/src/auxil/intel64' make[1]: *** [build_src] Error 2 make[1]: Leaving directory `/hpl-2.0' make: *** [build] Error 2 Going to the directory /hpl-2.0/src/auxil/intel64 shows a file, "Make.inc", but it's highlighted red, and the white text blinks. Is there a way to manually make that file? What do I need to do to get the makefile to do this for me?

  Read the article

• Make GRUB automatically boot Ubuntu

  - by Matt Robertson

  I am running a dual-boot with Ubuntu (10.10) and Windows 7. Recently I edited my /boot/grub/grub.cfg file to only show one version of Ubuntu (as opposed to several kernel versions) and Windows, simply by commenting out all other menu entries. My question is if I can edit GRUB to just boot a specific entry automatically. I tried removing all other menu entries, but GRUB still showed the menu with only one entry. I've also considered just setting the timeout to either 0 or 1 second, as this would basically achieve the same thing. What is the best way to do this?

  Read the article

• Other users on my Server?

  - by Jennifer Weinberg

  I'm buying a Server from a person (that I don't know really well) and I want to make sure that the previous owner hasn't got any access anymore. It's an Ubuntu Virtual Server and I already received the admin access (via shell). How can I find out if there are still other accounts left, who are still able to access my server (e.g. with a still existing shell account, ftp or another type of user account)? And how can I delete them if these accounts exist? Best regards, Jennifer

  Read the article

• What steps should I take to debug this non-starting hvm virtual machine?

  - by Ophidian

  I have a dom0 machine running CentOS 5.4 with all the latest updates using Xen as my hypervisor. I am using Xen in part because this machine was set up prior to KVM being included in RHEL, and in part because KVM's network bridging configuration is not nearly as simple as Xen's. The dom0 machine is headless and I do all of my VM management via virsh from the command line. I have two hvm domU's: A web server running CentOS 5.4 A mail server running Gentoo Both VM's are backed by LV's on the dom0 but do not use LVM in the domU. Both have virtually identical libvirt configurations (differing by expected things like name, UUID, NIC MAC, VNC port, etc). The web server domU (WSdomU hereafter) does not start since applying the most recent kernel update (kernel-xen-2.6.18-164.15.1.el5.x86_64 and kernel-2.6.18-164.15.1.el5.x86_64 for the dom0 and WSdomU respectively). By 'not start' I mean it appears to be running but it does not use an CPU cycles, does not bring up a graphical console, and does not respond on the network. The WSdomU is listed as no state rather than the normal running or blocked in xentop. The mail server domU starts fine and functions normally. Here are the steps I have taken so far that did not solve the problem: Reboot the dom0 to see if things come up on their own Check xen dmesg on dom0 Check xend logs (a cursory viewing did not show anything blatant; specific suggestions of things to look for would be appreciated) Attempted to connect to the WSdomU's graphical (VNC) console from the dom0 Shutdown the mail server domU and attempt to start the WSdomU Check the SELinux labels on backing LV's (they're the same) Set SELinux to permissive and attempt to start the WSdomU Use virsh edit to try tweaking the WSdomU config virsh undefine, reboot, virsh define the WSdomU config dd the WSdomU LV to an .img file, copy it to my Fedora desktop and run it under KVM (works fine) What steps should I take next to debug this? I will edit in any additional configuration's requested in the comments.

  Read the article

< Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >