Search Results

Search found 24969 results on 999 pages for 'oracle forms upgrade 11g'.

Page 672/999 | < Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >

  • The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

    - by Geertjan
    I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

    Read the article

  • JMX Monitoring of GlassFish Servers

    - by tjquinn
    Did you ever wonder what this message in your GlassFish server.log file means? JMXStartupService has started JMXConnector on JMXService URL service:jmx:rmi://192.168.2.102:8686/jndi/rmi://192.168.2.102:8686/jmxrmi It means you can monitor any GlassFish server process, remotely or locally, using any standard Java Management Extensions (JMX) client.  Examples: jconsole or jvisualvm.   Copy the part of the log message that starts with "service:" into the Add JMX Connection dialog of jvisualvm:  or into the New Connection dialog of jconsole: (The full string is truncated in the on-screen display, but if you copied from the server.log and pasted into the form it should all be there.) The examples above are for a DAS, and your host will probably be different.   The server.log files for other GlassFish servers (instances) will have similar log entries giving the JMX connection string to use for those processes.  Look for the host and/or port to be different. Note a few things about security: Here we've assumed you are using the default admin username and password.  If you are not, just enter a valid admin username and password for your installation.  Once connected, you have normal access to all the JVM statistics and controls. You can use JMX clients that support MBeans to view the GlassFish configuration.  When you connect to the DAS, you can also change that configuration, but you can only view configuration when you connect to an instance. To use a JMX client on one system to connect to a GlassFish server running on another system, you need to enable secure admin if you have not already done so: asadmin change-admin-password (respond to the prompts) asadmin enable-secure-admin asadmin restart-domain (as prompted in the output from enable-secure-admin)

    Read the article

  • Marek's JAX-RS 2.0 content from Devoxx 2011

    - by alexismp
    Marek Potociar, one of the two co-spec leads for the upcoming JAX-RS 2.0 had a very well-attended session at Devoxx and wrote a blog post about it detailing his conference experience (1st time at Devoxx) and running through the new features of the specification. A link to slides is also included in his post. The work by the expert group seems very solid at this point as you can read for yourself in details in the recently published early draft document. You can follow the remaining work between now and the middle of new year on the specification project pages on java.net.

    Read the article

  • Fix import hint

    - by Martin Janicek
    Good news everyone! I've implemented 'Fix import hint' which should make your life (and most probably also the groovy development) much easier! It looks in the same way as in Java editor, so you might choose between classes with the same name. Hope you will enjoy it! And as usual if you would like to try it on your own, download the latest development build and I will be more than happy for every feedback!

    Read the article

  • Jersey 1.8 is released

    - by Jakub Podlesak
    On the last Friday, we have released the 1.8 version of Jersey, the open source, production quality, reference implementation of JAX-RS. The JAX-RS 1.1 specification is available at the JCP web site and also available in non-normative HTML here. For an overview of JAX-RS features read the Jersey user guide. To get started with Jersey read the getting started section of that guide. To understand more about what Jersey depends on read the dependencies section of that guide. See change log here. This, 1.8, version of Jersey is going to be integrated into GlassFish 3.1.1 and contains bug fixes mainly. The most important fix from this perspective is included in the JAX-RS/EJB integration layer. It is now possible to implement JAX-RS resources as EJB Session beans, which implement local and/or remote interfaces. This functionality was broken in previous releases. Another great addition should come into the client space, where Pavel has already done some preparation in the client API (including some breaking changes there) for the non-blocking asynchronous client feature. The implementation is already part of the experimental Jersey space and should be included as part of the stable Jersey bits in some of the coming releases. For feedback send email to: [email protected] (archived here) or log bugs/features here.

    Read the article

  • Enterprise Service Bus (ESB): Important architectural piece to a SOA or is it just vendor hype?

    Is an Enterprise Service Bus (ESB) an important architectural piece to a Service-Oriented Architecture (SOA), or is it just vendor hype in order to sell a particular product such as SOA-in-a-box? According to IBM.com, an ESB is a flexible connectivity infrastructure for integrating applications and services; it offers a flexible and manageable approach to service-oriented architecture implementation. With this being said, it is my personal belief that ESBs are an important architectural piece to any SOA. Additionally, generic design patterns have been created around the integration of web services in to ESB regardless of any vendor. ESB design patterns, according to Philip Hartman, can be classified in to the following categories: Interaction Patterns: Enable service interaction points to send and/or receive messages from the bus Mediation Patterns: Enable the altering of message exchanges Deployment Patterns: Support solution deployment into a federated infrastructure Examples of Interaction Patterns: One-Way Message Synchronous Interaction Asynchronous Interaction Asynchronous Interaction with Timeout Asynchronous Interaction with a Notification Timer One Request, Multiple Responses One Request, One of Two Possible Responses One Request, a Mandatory Response, and an Optional Response Partial Processing Multiple Application Interactions Benefits of the Mediation Pattern: Mediator promotes loose coupling by keeping objects from referring to each other explicitly, and it lets you vary their interaction independently Design an intermediary to decouple many peers Promote the many-to-many relationships between interacting peers to “full object status” Examples of Interaction Patterns: Global ESB: Services share a single namespace and all service providers are visible to every service requester across an entire network Directly Connected ESB: Global service registry that enables independent ESB installations to be visible Brokered ESB: Bridges services that are reluctant to expose requesters or providers to ESBs in other domains Federated ESB: Service consumers and providers connect to the master or to a dependent ESB to access services throughout the network References: Mediator Design Pattern. (2011). Retrieved 2011, from SourceMaking.com: http://sourcemaking.com/design_patterns/mediator Hartman, P. (2006, 24 1). ESB Patterns that "Click". Retrieved 2011, from The Art and Science of Being an IT Architect: http://artsciita.blogspot.com/2006/01/esb-patterns-that-click.html IBM. (2011). WebSphere DataPower XC10 Appliance Version 2.0. Retrieved 2011, from IBM.com: http://publib.boulder.ibm.com/infocenter/wdpxc/v2r0/index.jsp?topic=%2Fcom.ibm.websphere.help.glossary.doc%2Ftopics%2Fglossary.html Oracle. (2005). 12 Interaction Patterns. Retrieved 2011, from Oracle® BPEL Process Manager Developer's Guide: http://docs.oracle.com/cd/B31017_01/integrate.1013/b28981/interact.htm#BABHHEHD

    Read the article

  • Be There: Tinkerforge/NetBeans Platform Integration Course

    - by Geertjan
    Tinkerforge is an electronic construction kit. It exposes a number of API bindings, including, of course, Java. The nice thing also is that Tinkerforge products are open source, both on the hardware and software levels, so that you can take their bases as a starting point for your own modifications. "The TinkerForge system is a set of pre-built electronics boards that are built in such a way that you can stack the boards (known as bricks), attach accessories (known as bricklets), and have your prototype and and running quickly. Unlike systems, such as the Arduino or Launchpad, the TinkerForge has to be attached to a computer and the computer does all of the work. With an easy set of application programming interfaces (APIs) available in C/C++, C#, Java, PHP, and Ruby, the system is easy to interface and program over USB in a snap." (from this useful article) Henning Krüp, who has arranged several NetBeans Platform Certified Training Courses in the past, in the Nordhorn/Lingen area in Germany, had the inspired idea to focus the next course on integration with Tinkerforge. In other words, the whole course will be focused on creating a standalone Java desktop application that leverages the NetBeans Platform to interact with Tinkerforge! Interested in joining the course or setting up something similar yourself? The course organized by Henning will be held from 19 to 21 September, as explained here, together with contact details.  If you'd like to organize a similar course at a location of your choosing, leave a comment at the end of this blog entry and we'll set something up together!

    Read the article

  • JavaOne - Java SE Embedded Booth - Servergy Micro Server

    - by David Clack
    Hi All,  So it's been awhile, I've been working with all the ARM and Power Architecture partners we have now on testing Java SE Embedded. We will have a Java SE Embedded for ARM and PPC at Java One next week, I'll be bringing in some of the great ARM and PPC systems to demonstrate.  The first system I'd like to tell you about is a really cool 8 core Power Architecture Micro Server from a company in Dallas called Servergy. Java One will be it's first public outing, Bill Mapp the CEO will be doing a talk at the Java Embedded @ JavaOne conference in the Hotel Nikko, right next door to the JavaOne show in the Hilton. To read more about Servergy https://www.linux.com/news/enterprise/cloud-computing/641488-linux-based-servergy-advances-data-center-efficiency http://www.servergy.com/ If you are registered at JavaOne you can come over to the Java Embedded @ JavaOne for $100 Come see us in booth 5605 See you there Dave

    Read the article

  • Using the full tty real estate with sqlplus

    - by katsumii
    I believe 'rlwrap' is widely used for adding 'sqlplus' the history function and command line editing. 'rlwrap' has other functions and here's my kludgy alias to force sqlplus to use the full real estate of yourtty. Be it PuTTy session from Windows or Linux gnome terminal. $ declare -f sqlplus sqlplus () { PRE_TEXT=$(resize |sed -n "1s/COLUMNS=/set linesize /p;2s/LINES=/set pagesize /p"|while read line; do printf "%s \ " "$line";done); if [ -z "$1" ]; then rlwrap -m -P "$PRE_TEXT" sqlplus /nolog; else if ! echo $1 | grep '^-' > /dev/null; then rlwrap -m -P "$PRE_TEXT connect $*" sqlplus /nolog; else command sqlplus $*; fi; fi }

    Read the article

  • YouTube: Chrome Dev Tools Integration with NetBeans IDE!

    - by Geertjan
    Some time ago my colleague David Konecny discussed the question "What works better for you? NetBeans IDE or Chrome Developer Tools?". It's a good read. David highlights the point that it's not a question of either/or but both, since the two tools are like the apple/pear dichotmoy. However, good news! The two worlds are not divided in NetBeans IDE 7.4. Changes you make in Chrome Developer Tools (CDT) are automatically persisted to the related files in NetBeans IDE, as you can see in a new YouTube clip I made today. The new integration of CDT with NetBeans IDE has been mentioned in the NetBeans IDE 7.4 New & Noteworthy, while on Twitter this was sighted yesterday: Watch the movie above and within 5 minutes you too will see the simplicity and power of CDT integration with NetBeans IDE. In other news. I consider the above to be my favorite (though it's a tough choice, since there are so many new features in NetBeans IDE 7.4) new feature, for the article "What is your favorite new NetBeans IDE 7.4 feature?"

    Read the article

  • Update Your NetBeans Plugin's "Supported NetBeans Versions" In The Next Two Weeks!

    - by Geertjan
    For each NetBeans plugin uploaded to the NetBeans Plugin Portal, the registration page starts like this: Note how the "Supported NetBeans Versions" field is empty, i.e., no checkbox is checked, for the plugin above. As you can also see, there is a red asterisk next to this field, which means it is mandatory. It is mandatory for the latest version of the NetBeans Plugin Portal, while it wasn't mandatory before, so that several plugins were registered without their supported version being set. Therefore, since the version is now mandatory, anyone who doesn't want their plugin to be hidden for the rest of this year, and removed on 1 January 2013 if no one complains about their absence, needs to go to their plugin's registration page and set a NetBeans Version. E-mails have been sent to plugin developers of unversioned plugins already, over the last weeks. Currently there are 91 plugins that still need to have their NetBeans Version set. Probably at least 1/3 of those are my own plugins, so this is as much a reminder to myself as anyone else! Whether or not you have received an e-mail asking you to set a NetBeans Version for your plugins, please take a quick look anyway and maybe this is a good opportunity to update other information relating to your plugin. You (and I) have two weeks: on Monday 16 April, any NetBeans plugin in the Plugin Portal without a NetBeans Version will be hidden. And then removed, at the start of next year, if no one complains.

    Read the article

  • Play Majesty: The Fantasy Kingdom Sim on your Java ME phone

    - by hinkmond
    Here's a game that started on on the iDrone, then Anphoid, and now finally on Java ME tech-enabled mobile phones (thank goodness!). See: Majesty: Fantasy Kingdom Here's a quote: When you become the head of the country all the responsibility for the land's prosperity rests on your royal shoulders. You will have to fight various enemies and monsters, explore new territories, manage economic and scientific developments and solve a heap of unusual and unexpected tasks. For example, what will you do when all the gold in the kingdom transforms into cookies? Sounds like the same as becoming President of the U.S... except for the gold turning into cookies part... and the part about dragons. But, everything else is the same. Hinkmond

    Read the article

  • How do you report out user research results?

    - by user12277104
    A couple weeks ago, one of my mentees asked to meet, because she wanted my advice on how to report out user research results. She had just conducted her first usability test for her new employer, and was getting to the point where she wanted to put together some slides, but she didn't want them to be boring. She wanted to talk with me about what to present and how best to present results to stakeholders. While I couldn't meet for another week, thanks to slideshare, I could quickly point her in the direction that my in-person advice would have led her. First, I'd put together a panel for the February 2012 New Hampshire UPA monthly meeting that we then repeated for the 2012 Boston UPA annual conference. In this panel, I described my reporting techniques, as did six of my colleagues -- two of whom work for companies smaller than mine, and four of whom are independent consultants. Before taking questions, we each presented for 3 to 5 minutes on how we presented research results. The differences were really interesting. For example, when do you really NEED a long, written report (as opposed to an email, spreadsheet, or slide deck with callouts)? When you are reporting your test results to the FDA -- that makes sense. in this presentation, I describe two modes of reporting results that I use.  Second, I'd been a participant in the CUE-9 study. CUE stands for Comparative Usability Evaluation, and this was the 9th of these studies that Rolf Molich had designed. Originally, the studies were designed to show the variability in evaluation methods practitioners use to evaluate websites and applications. Of course, using methods and tasks of their own choosing, the results were wildly different. However, in this 9th study, the tasks were the same, the participants were the same, and the problem severity scale was the same, so how would the results of the 19 practitioners compare? Still wildly variable. But for the purposes of this discussion, it gave me a work product that was not proprietary to the company I work for -- a usability test report that I could share publicly. This was the way I'd been reporting results since 2005, and pretty much what I still do, when time allows.  That said, I have been continuing to evolve my methods and reporting techniques, and sometimes, there is no time to create that kind of report -- the team can't wait the days that it takes to take screen shots, go through my notes, refer back to recordings, and write it all up. So in those cases, I use bullet points in email, talk through the findings with stakeholders in a 1-hour meeting, and then post the take-aways on a wiki page. There are other requirements for that kind of reporting to work -- for example, the stakeholders need to attend each of the sessions, and the sessions can't take more than a day to complete, but you get the idea: there is no one "right" way to report out results. If the method of reporting you are using is giving your stakeholders the information they need, in a time frame in which it is useful, and in a format that meets their needs (FDA report or bullet points on a wiki), then that's the "right" way to report your results. 

    Read the article

  • Unlock the Java EE 6 Platform using NetBeans 7.1

    - by arungupta
    NetBeans IDE provide tools, templates, and code generators that can be used for the specifications that are part of the Java EE 6 Platform. In a recent article Geertjan builds a simple end-to-end application using the standard Model-View-Controller architecture. It uses Java Persistence API 2, Servlets 3, JavaServer Faces 2, Enterprise Java Beans 3.1, Context and Dependency Injection 1.0, and Java API for RESTful Web Services 1.1 showing the complete stack. A self-paced and an extensive hands-on lab covering this article and much more is also available here. A video (47-minutes) explaining how to build a similar application can be viewed here.

    Read the article

  • Setup a Autoreply Only Account

    - by dabrain
    For some very good reason you might would like to setup a 'autoreply' only account, without storing the incoming mail into a mailbox. If not already done, create an account via Delegated Admin Gui or commadmin Commandline Tool. Example: /opt/sun/comms/da/bin/commadmin user create -D admin -d vmdomain.tld -w enigma -F Mike -l    mparis -L Paris -W tester -E [email protected] -S mail -H mars.vmdomain.tld Setup mailDeliveryOption to autoreply mode only, so no email will be stored in the user mailbox, skip this step if you want incoming emails stored in the mailbox. ldapmodify -D "cn=Directory Manager" -w enigma -f /tmp/modfile [/tmp/modfile] dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify replace: mailDeliveryOption mailDeliveryOption: autoreply Setup mailSieveRuleSource with the autoreply text and 'do-not-reply' From address. The "Thank you ..." part becomes the subject. The next string in quotes is the body part of the message. The ":hours 0" denotes that we want a reply sent for every message. Finally,  the \n is used because of the wanted newlines in the body. ldapmodify -D "cn=Directory Manager" -w enigma -f /tmp/addfile [/tmp/addfile] dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: mailSieveRuleSource mailSieveRuleSource: require "vacation"; vacation :hours 0 :reply :from "do-not-reply   @domain.com" :subject "Thank you for contacting webpost" "Your Mail is being review   ed.\nTo access contact information please visit : http://www.domain.com \nPlease do    not reply to this e-mail as it is an automated response on your mail being accessed   .\n\nPublic Respose Unit.\n"

    Read the article

  • Valentine's Day in sunny Ottawa, Ontario

    - by Roy F. Swonger
    Birds may fly south for the winter, but I will be heading to Ottawa, Ontario next week for a workshop on 15-FEB. I'm pretty used to winter because I grew up in the snow belt southeast of Buffalo, NY -- and this winter in New England is helping me get prepared as well. For reference, the big lump is my gas grill. Anyway, I'm looking forward to a good workshop and to visiting Ottawa for my first time. If you're in the Ottawa/Gatineau area and would like to attend, please contact your account team for more information.

    Read the article

  • Upcoming Enhancements in AngularJS Integration in NetBeans IDE

    - by Geertjan
    New bleeding edge enhancements in AngularJS support in NetBeans IDE enable many more controllers to be found than in NetBeans IDE 7.4. The next version of NetBeans IDE parses all JavaScript files and checks for defined AngularJS controllers, such as the below: All recognized AngularJS controllers are offered in code completion, as shown below. In other words, code completion works better in finding AngularJS controllers. Another improvement is in the "Go To Declaration" feature. When you click Ctrl+Mouse over the name of a controller inside an NG-controller directive, you will be navigated to the related controller declaration. More accurate results can be shown in code completion mainly because there are changes in the generation of JavaScript virtual sources in an AngularJS page.

    Read the article

  • Hot-hot-hot for jobs in Java and mobile software

    - by hinkmond
    It's hot-hot-hot! The market for Java and mobile developers keeps growing hotter, and hotter--so says the latest Dice survey. See: Dice survey says Java & Mobile are tops Here's a quote: The market for mobile developers is expanding faster than the talent pool can adapt, a Dice survey indicates. Software developers in general—as well as Java, mobile software and Microsoft .Net developers in particular—are in short supply today. Those fields represent four of the top five most difficult positions IT managers are looking to fill... ... The New York/New Jersey metro area led the country with 8,871 positions listed... So, if you are looking to get into software development get crackin' in learning Java mobile programming and move to NY or NJ. Let's go Mets! Hinkmond

    Read the article

  • Considering Embedding a Database? Choose MySQL!

    - by Bertrand Matthelié
    The M of the LAMP stack and the #1 database for Web-based applications, MySQL is also an extremely popular choice as embedded database. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Access our Resource Kit to discover the top reasons why:   3,000 ISVs and OEMs rely on MySQL as their embedded database 8 of the top 10 software vendors and hundreds of startups selected MySQL to power their cloud, on-premise and appliance-based offerings Leading mobile and SaaS providers ensure continuous service availability and scalability with lower cost and risk using MySQL Cluster. Learn how you can reduce costs and accelerate time to market while increasing performance and reliability. Access white papers, webinars, case studies and other resources in our Resource Kit.  

    Read the article

  • Meet up with the JCP at JavaOne Latin America

    - by Heather VanCura
    The JCP made it to JavaOne Brazil!  We had a quickie presentation earlier today on JCP.Next that was well attended.  Come to see us at@ the  OTN mini-theatre tomorrow from 12:00-12:15 pm for a quickie on participation.  Then make your way to the Mazanino Sala 12 at 12:30 pm for CON-22250.  "The Java Community Process: How You Can Make a Positive Difference" will be presented with Heather VanCura, JCP,  and Fabio Velloso, SouJava, on Thursday, 6 December, at 12:30 pm.  Find out more about how to participate in the JCP program, the JCP.Next effort and how to get involved with Adopt-a-JSR through your JUG (or on your own)!  Here is the description in Portuguese: A JCP desempenha um papel fundamental na evolução do Java. A sessão vai enfatizar o valor da transparência e participação através da JCP, Grupos de Usuários Java e do programa Adote um JSR. Vamos explorar também algumas das mudanças futuras no processo através da iniciativa JCP.Next, e explicar como você pode se envolver. Traga suas dúvidas, suas sugestões, e suas preocupações. Nós queremos ouvir de você, e incentivá-lo e facilitar a sua participação ativa no avanço da plataforma Java

    Read the article

  • New Analytic settings for the new code

    - by Steve Tunstall
    If you have upgraded to the new 2011.1.3.0 code, you may find some very useful settings for the Analytics. If you didn't already know, the analytic datasets have the potential to fill up your OS hard drives. The more datasets you use and create, that faster this can happen. Since they take a measurement every second, forever, some of these metrics can get in the multiple GB size in a matter of weeks. The traditional 'fix' was that you had to go into Analytics -> Datasets about once a month and clean up the largest datasets. You did this by deleting them. Ouch. Now you lost all of that historical data that you might have wanted to check out many months from now. Or, you had to export each metric individually to a CSV file first. Not very easy or fun. You could also suspend a dataset, and have it not collect data at all. Well, that fixed the problem, didn't it? of course you now had no data to go look at. Hmmmm.... All of this is no longer a concern. Check out the new Settings tab under Analytics... Now, I can tell the ZFSSA to keep every second of data for, say, 2 weeks, and then average those 60 seconds of each minute into a single 'minute' value. I can go even further and ask it to average those 60 minutes of data into a single 'hour' value.  This allows me to effectively shrink my older datasets by a factor of 1/3600 !!! Very cool. I can now allow my datasets to go forever, and really never have to worry about them filling up my OS drives. That's great going forward, but what about those huge datasets you already have? No problem. Another new feature in 2011.1.3.0 is the ability to shrink the older datasets in the same way. Check this out. I have here a dataset called "Disk: I/O opps per second" that is about 6.32M on disk (You need not worry so much about the "In Core" value, as that is in RAM, and it fluctuates all the time. Once you stop viewing a particular metric, you will see that shrink over time, just relax).  When one clicks on the trash can icon to the right of the dataset, it used to delete the whole thing, and you would have to re-create it from scratch to get the data collecting again. Now, however, it gives you this prompt: As you can see, this allows you to once again shrink the dataset by averaging the second data into minutes or hours. Here is my new dataset size after I do this. So it shrank from 6.32MB down to 2.87MB, but i can still see my metrics going back to the time I began the dataset. Now, you do understand that once you do this, as you look back in time to the minute or hour data metrics, that you are going to see much larger time values, right? You will need to decide what size of granularity you can live with, and for how long. Check this out. Here is my Disk: Percent utilized from 5-21-2012 2:42 pm to 4:22 pm: After I went through the delete process to change everything older than 1 week to "Minutes", the same date and time looks like this: Just understand what this will do and how you want to use it. Right now, I'm thinking of keeping the last 6 weeks of data as "seconds", and then the last 3 months as "Minutes", and then "Hours" forever after that. I'll check back in six months and see how the sizes look. Steve 

    Read the article

  • Building Queries Systematically

    - by Jeremy Smyth
    The SQL language is a bit like a toolkit for data. It consists of lots of little fiddly bits of syntax that, taken together, allow you to build complex edifices and return powerful results. For the uninitiated, the many tools can be quite confusing, and it's sometimes difficult to decide how to go about the process of building non-trivial queries, that is, queries that are more than a simple SELECT a, b FROM c; A System for Building Queries When you're building queries, you could use a system like the following:  Decide which fields contain the values you want to use in our output, and how you wish to alias those fields Values you want to see in your output Values you want to use in calculations . For example, to calculate margin on a product, you could calculate price - cost and give it the alias margin. Values you want to filter with. For example, you might only want to see products that weigh more than 2Kg or that are blue. The weight or colour columns could contain that information. Values you want to order by. For example you might want the most expensive products first, and the least last. You could use the price column in descending order to achieve that. Assuming the fields you've picked in point 1 are in multiple tables, find the connections between those tables Look for relationships between tables and identify the columns that implement those relationships. For example, The Orders table could have a CustomerID field referencing the same column in the Customers table. Sometimes the problem doesn't use relationships but rests on a different field; sometimes the query is looking for a coincidence of fact rather than a foreign key constraint. For example you might have sales representatives who live in the same state as a customer; this information is normally not used in relationships, but if your query is for organizing events where sales representatives meet customers, it's useful in that query. In such a case you would record the names of columns at either end of such a connection. Sometimes relationships require a bridge, a junction table that wasn't identified in point 1 above but is needed to connect tables you need; these are used in "many-to-many relationships". In these cases you need to record the columns in each table that connect to similar columns in other tables. Construct a join or series of joins using the fields and tables identified in point 2 above. This becomes your FROM clause. Filter using some of the fields in point 1 above. This becomes your WHERE clause. Construct an ORDER BY clause using values from point 1 above that are relevant to the desired order of the output rows. Project the result using the remainder of the fields in point 1 above. This becomes your SELECT clause. A Worked Example   Let's say you want to query the world database to find a list of countries (with their capitals) and the change in GNP, using the difference between the GNP and GNPOld columns, and that you only want to see results for countries with a population greater than 100,000,000. Using the system described above, we could do the following:  The Country.Name and City.Name columns contain the name of the country and city respectively.  The change in GNP comes from the calculation GNP - GNPOld. Both those columns are in the Country table. This calculation is also used to order the output, in descending order To see only countries with a population greater than 100,000,000, you need the Population field of the Country table. There is also a Population field in the City table, so you'll need to specify the table name to disambiguate. You can also represent a number like 100 million as 100e6 instead of 100000000 to make it easier to read. Because the fields come from the Country and City tables, you'll need to join them. There are two relationships between these tables: Each city is hosted within a country, and the city's CountryCode column identifies that country. Also, each country has a capital city, whose ID is contained within the country's Capital column. This latter relationship is the one to use, so the relevant columns and the condition that uses them is represented by the following FROM clause:  FROM Country JOIN City ON Country.Capital = City.ID The statement should only return countries with a population greater than 100,000,000. Country.Population is the relevant column, so the WHERE clause becomes:  WHERE Country.Population > 100e6  To sort the result set in reverse order of difference in GNP, you could use either the calculation, or the position in the output (it's the third column): ORDER BY GNP - GNPOld or ORDER BY 3 Finally, project the columns you wish to see by constructing the SELECT clause: SELECT Country.Name AS Country, City.Name AS Capital,        GNP - GNPOld AS `Difference in GNP`  The whole statement ends up looking like this:  mysql> SELECT Country.Name AS Country, City.Name AS Capital, -> GNP - GNPOld AS `Difference in GNP` -> FROM Country JOIN City ON Country.Capital = City.ID -> WHERE Country.Population > 100e6 -> ORDER BY 3 DESC; +--------------------+------------+-------------------+ | Country            | Capital    | Difference in GNP | +--------------------+------------+-------------------+ | United States | Washington | 399800.00 | | China | Peking | 64549.00 | | India | New Delhi | 16542.00 | | Nigeria | Abuja | 7084.00 | | Pakistan | Islamabad | 2740.00 | | Bangladesh | Dhaka | 886.00 | | Brazil | Brasília | -27369.00 | | Indonesia | Jakarta | -130020.00 | | Russian Federation | Moscow | -166381.00 | | Japan | Tokyo | -405596.00 | +--------------------+------------+-------------------+ 10 rows in set (0.00 sec) Queries with Aggregates and GROUP BY While this system might work well for many queries, it doesn't cater for situations where you have complex summaries and aggregation. For aggregation, you'd start with choosing which columns to view in the output, but this time you'd construct them as aggregate expressions. For example, you could look at the average population, or the count of distinct regions.You could also perform more complex aggregations, such as the average of GNP per head of population calculated as AVG(GNP/Population). Having chosen the values to appear in the output, you must choose how to aggregate those values. A useful way to think about this is that every aggregate query is of the form X, Y per Z. The SELECT clause contains the expressions for X and Y, as already described, and Z becomes your GROUP BY clause. Ordinarily you would also include Z in the query so you see how you are grouping, so the output becomes Z, X, Y per Z.  As an example, consider the following, which shows a count of  countries and the average population per continent:  mysql> SELECT Continent, COUNT(Name), AVG(Population)     -> FROM Country     -> GROUP BY Continent; +---------------+-------------+-----------------+ | Continent     | COUNT(Name) | AVG(Population) | +---------------+-------------+-----------------+ | Asia          |          51 |   72647562.7451 | | Europe        |          46 |   15871186.9565 | | North America |          37 |   13053864.8649 | | Africa        |          58 |   13525431.0345 | | Oceania       |          28 |    1085755.3571 | | Antarctica    |           5 |          0.0000 | | South America |          14 |   24698571.4286 | +---------------+-------------+-----------------+ 7 rows in set (0.00 sec) In this case, X is the number of countries, Y is the average population, and Z is the continent. Of course, you could have more fields in the SELECT clause, and  more fields in the GROUP BY clause as you require. You would also normally alias columns to make the output more suited to your requirements. More Complex Queries  Queries can get considerably more interesting than this. You could also add joins and other expressions to your aggregate query, as in the earlier part of this post. You could have more complex conditions in the WHERE clause. Similarly, you could use queries such as these in subqueries of yet more complex super-queries. Each technique becomes another tool in your toolbox, until before you know it you're writing queries across 15 tables that take two pages to write out. But that's for another day...

    Read the article

  • Not Drowning, Being Saved By a Dog

    - by Aaron Lazenby
    Really, there's no dog in this story. Just a week without travel to get some actual work done.I had plans to blog ambitiously from from Collaborate 10 (Wi-Fi was limited; iPad is still untested), but it's a much busier week than your agenda suggests.Scheduling sessions is one thing: you can count on those chunks of time being lost to the universe. It's the bumping into people in the hall and dropping in on an impromptu lunch that really knocks things out of whack.Good think too: I met with some great folks from

    Read the article

  • Mix metrics for June 14, 2010

    - by tim.bonnemann
    We've been busy working on a few improvements to Mix which we plan to roll out over the coming weeks. In the meantime, here are our latest community metrics once again: Registered Mix users (weekly growth) 64,769 (+0.9%) Active users (percent of total) Last 30 days: 4,682 (7.2%) Last 60 days: 8,251 (12.7%) Last 90 days: 11,936 (18.4%) Traffic (30-day) Visits: 13,674 Page views: 77,808 Twitter Followers: 3,451 List mentions: 205 User-generated content (30-day) New ideas: 29 New questions: 38 New comments: 167 Groups There are currently 1,440 Mix groups (requires login).

    Read the article

< Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >