Search Results

Search found 18993 results on 760 pages for 'context info'.

Page 673/760 | < Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >

  • Windows Server 2008 R2 Firewall - Interface specific rules

    - by Mehmet Ergut
    I'm trying to define per interface rules, much like it was in Server 2003. We will be replacing our old 2003 server with a new 2008 R2 server. The server runs IIS and SQL Server. It's a dedicated server at the hosting company. We use a OpenVPN connection from the office to access SQL server, RDesktop, FTP and other administrative services. Only http and ssh is listening on the public interface. On the old server running 2003, I was able to define global rules for http and ssh, and allow other services only on the vpn interface. I can't find a way to do the same on 2008 R2. I understand that there is the Network Location Awareness service, firewall rules are applied according to the current network location. But I don't understand the purpose of this on a server. The only close solution I found is to set the scope on the firewall rule and restrict remote ip addresses to the private subnet of the office. But the ports will still be listening on the public interface. So how can I restrict a firewall rule to the connections coming from the vpn interface ? A note on this page states that scoping a rule to an interface does not exist anymore: In earlier versions of Windows, many of these command accepted a parameter called interface. This parameter is not supported in the firewall context in Windows Vista or later versions of Windows. I can't believe that they simply decided to remove a core firewall functionality that every firewall has. There must be a way to restrict a rule to an interface. Any ideas ? I'm still unable to find an adequate solution to my problem. So for now, my workaround is this: Administrative services listen on VPN IP address Firewall rules restrict the scope to the local IP address of VPN Public services listen on all interfaces, no scope restriction on firewall rules This is not optimal, if I change the IP address of the VPN, I need to edit the firewall rules too. It won't be the case if the rules were bound to the interface.

    Read the article

  • Joining Windows 7 Professional to a Windows Server 2003 R2 x64 domain fails.

    - by Vinko Vrsalovic
    I have a windows 7 professional (spanish) laptop trying to join a Windows Server 2003 (english) domain. It detect correctly the SRV record, finding the proper domain controller, but then the join fails with the error message (snippet, because the error is in spanish) An Active Directory Domain Controller for This Domain Could Not be Contacted The DNS is correctly set, and client can ping by name and IP the server, the server can ping the client by IP. I've tested with the FW down to no avail. A host of other XP Pro clients are connected to the domain. I've restarted Net Logon and checked that Windows Time is up. Also the times are in sync between the server and the client. I'll put below diagnostics output. I'm wondering if there's anything special to be done on either the server or the client to have a Win 7 Pro join a 2k3 R2 domain. The following diagnostic information follows: netdiag /q for the DC dcdiag on the DC ipconfig /all on the Win 7 client netdiag /q on the DC: .................................. Computer Name: HI-X2 DNS Host Name: hi-x2.hi.local System info : Microsoft Windows Server 2003 R2 (Build 3790) Processor : EM64T Family 6 Model 23 Stepping 10, GenuineIntel List of installed hotfixes : KB923561 KB924667-v2 KB925398_WMP64 KB925902 KB926122 KB927891 KB929123 KB930178 KB932168 KB936357 KB938127 KB941569 KB942830 KB942831 KB943055 KB943460 KB944338-v2 KB944653 KB945553 KB946026 KB948496 KB950760 KB950762 KB950974 KB951066 KB951748 KB952004 KB952069 KB952954 KB954155 KB954550-v7 KB955069 KB955759 KB956572 KB956802 KB956803 KB956844 KB958469 KB958644 KB958869 KB959426 KB960225 KB960803 KB960859 KB961063 KB961118 KB961501 KB967715 KB967723 KB968389 KB968816 KB969059 KB969947 KB970238 KB970430 KB970483 KB971032 KB971468 KB971657 KB971737 KB971961 KB971961-IE8 KB972270 KB973037 KB973354 KB973507 KB973540 KB973687 KB973815 KB973825 KB973869 KB973904 KB973917-v2 KB974112 KB974318 KB974392 KB974571 KB975025 KB975467 KB975560 KB975713 KB976662-IE8 KB977290 KB977816 KB977914 KB978037 KB978262 KB978338 KB978542 KB978601 KB978706 KB979306 KB979309 KB979683 KB980182 KB980182-IE8 KB980232 KB980302-IE8 KB981332-IE8 KB981350 Q147222 Per interface results: Adapter : Local Area Connection Host Name. . . . . . . . . : hi-x2.hi.local IP Address . . . . . . . . : 10.0.1.199 Subnet Mask. . . . . . . . : 255.0.0.0 Default Gateway. . . . . . : 10.0.1.1 Dns Servers. . . . . . . . : 10.0.1.199 WINS service test. . . . . : Skipped Global results: [WARNING] You don't have a single interface with the 'WorkStation Service', 'Messenger Service', 'WINS' names defined. DNS test . . . . . . . . . . . . . : Passed PASS - All the DNS entries for DC are registered on DNS server '10.0.1.199'. IP Security test . . . . . . . . . : Skipped The command completed successfully dcdiag on the DC: Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Connectivity ......................... HI-X2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Replications ......................... HI-X2 passed test Replications Starting test: NCSecDesc ......................... HI-X2 passed test NCSecDesc Starting test: NetLogons ......................... HI-X2 passed test NetLogons Starting test: Advertising ......................... HI-X2 passed test Advertising Starting test: KnowsOfRoleHolders ......................... HI-X2 passed test KnowsOfRoleHolders Starting test: RidManager ......................... HI-X2 passed test RidManager Starting test: MachineAccount ......................... HI-X2 passed test MachineAccount Starting test: Services ......................... HI-X2 passed test Services Starting test: ObjectsReplicated ......................... HI-X2 passed test ObjectsReplicated Starting test: frssysvol ......................... HI-X2 passed test frssysvol Starting test: frsevent ......................... HI-X2 passed test frsevent Starting test: kccevent ......................... HI-X2 passed test kccevent Starting test: systemlog ......................... HI-X2 passed test systemlog Starting test: VerifyReferences ......................... HI-X2 passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : hi Starting test: CrossRefValidation ......................... hi passed test CrossRefValidation Starting test: CheckSDRefDom ......................... hi passed test CheckSDRefDom Running enterprise tests on : hi.local Starting test: Intersite ......................... hi.local passed test Intersite Starting test: FsmoCheck ......................... hi.local passed test FsmoCheck ipconfig /all on the Windows 7 client: Configuraci¢n IP de Windows Nombre de host. . . . . . . . . : hi-p6 Sufijo DNS principal . . . . . : Tipo de nodo. . . . . . . . . . : h¡brido Enrutamiento IP habilitado. . . : no Proxy WINS habilitado . . . . . : no Adaptador de LAN inal mbrica Conexi¢n de red inal mbrica: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN Direcci¢n f¡sica. . . . . . . . . . . . . : 00-22-FB-63-47-A0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv4. . . . . . . . . . . . . . : 10.0.1.42(Preferido) M scara de subred . . . . . . . . . . . . : 255.255.255.0 Puerta de enlace predeterminada . . . . . : 10.0.1.1 Servidores DNS. . . . . . . . . . . . . . : 10.0.1.199 NetBIOS sobre TCP/IP. . . . . . . . . . . : habilitado Adaptador de Ethernet Conexi¢n de  rea local: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe GBE Family Controller Direcci¢n f¡sica. . . . . . . . . . . . . : 00-1E-33-1F-35-B1 DHCP habilitado . . . . . . . . . . . . . : s¡ Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel isatap.{8926581E-09AC-4123-906B-DA6386AD2D60}: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Adaptador ISATAP de Microsoft Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel Teredo Tunneling Pseudo-Interface: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv6 . . . . . . . . . . : 2001:0:5ef5:73ba:1cec:3883:f5ff:fed5(Preferido) V¡nculo: direcci¢n IPv6 local. . . : fe80::1cec:3883:f5ff:fed5%13(Preferido) Puerta de enlace predeterminada . . . . . : :: NetBIOS sobre TCP/IP. . . . . . . . . . . : deshabilitado

    Read the article

  • Moving from VPS to Cloud

    - by GRIGORE-TURBODISEL
    ...and I have a few questions. I'm basically working on a MySQL+PHP based webapp. Since I don't have on-demand scaling with VPS, I'm planning to move from VPS to Cloud when I hit the 1000 subscribers barrier. I'm looking at Windows Azure but I'm ok with other suggestions. So here are my questions: Will it really cost me a kidney? Every subscriber needs to download around 4-5MB of static resources each day. Bandwidth is free on the VPS but here I see costs can easily get to $800.00/mo; this makes me very insecure about the whole thing, I mean VPS is just $2,000/yr. Do I need another VM or is PHP included in the Web Sites? I have basic sysadmin skills, I think I can handle setting up a PHP install, but will I have to do this? If yes, what other service do I need to setup manually? What about Memcached, MySQL, etc? What security protections does it include? For example I have some basic protection included, like directory traversals and executable files upload; I also have CloudFlare on my other websites for DDoS protection; will I need to do the same thing here too, can it even be installed, can I edit my DNS records, etc? How are e-mails, subdomains, add-on domains, parked domains, etc. handled? I haven't seen any references to e-mail boxes. On the VPS I simply add them from cPanel ([email protected] / whatever.mysite.com / ...); do I have a similar management interface here? Do I get SSH access? Or at least FTP, remote MySQL access and maybe some incremental back-ups or something? Can I see my quotas and advanced traffic info? I must mention that I really like the idea of the whole "cloud" concept, the added reliability and everything but I really need maybe a parallel to regular hosting or something so I know what to expect.

    Read the article

  • Windows Server 2008 Software Raid 5 - Data integrity issues

    - by Fopedush
    I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

    Read the article

  • Scaling a video processing application on EC2?

    - by Stpn
    I am approaching the need to scale a video-processign application that runs on EC2. So far the setup is one machine: Backbonejs frontend Rails 3.2 Postgresql Resque + S3 for storage The flow of the app is as follows: 1) Request from frontend. Upload a video. 2) Storing video 3) Quering external APIs. 4) Processing / encoding videos. 5) Post to frontend. I can separate the backend and frontend without any problems, but when it comes to distributing the backend between several servers I am a bit puzzled. I can probably come up with a temporary solution (like just duplicating apps making several instances), but since I don't really have expertise in backend system administration, there can be some fundamental mistakes.. Also I would rather have something that is scalable. I wonder if anyone can give some feedback on the following plan: A) Frontend machine. Just frontend, talks to backend via REST Api of sorts. B) Backend server (BS), main database. Gets request from 1), posts to 2) saves uploads to 3) C) S3 storage. D) Server for quering APIs. Basically just a Resque workers, that post info back to 2) E) Server for video encoding. Processes videos uploaded on 3) and uploads them back. So I will have: A)frontend \ \ B)MAIN_APP/DB ----- C)S3 Storage (Files) / \ / / \ / D)ExternalAPI_queries E)Video_Processing (redundant DB) (redundant DB) All this will supposedly talk to each other via HTTP requests. My reason for this is that Video Processing part is really the most resource-intensive and I would just run barebones application that accepts requests and starts processing them. Questions: 1) In this setup I will have the main database at B) and all other servers will communicate with it via HTTP requests (and store duplicates of databases also I guess..for safety reasons). Is it the right approach or should I have 1 database that everyone connects to (how then?) 2) Is it a good idea to separate API queries from Video Processing part? Logically they are very close (processing is determined by the result of API queries), but resource-wise Video Processing is waaay more intensive. 3) what should I use to distribute calls between backend apps based on load?

    Read the article

  • Thinkpad speaker turns mute - Linux Codec issue?

    - by Curlew
    At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

    Read the article

  • SSH: Port Forwarding, Firewalls, & Plesk

    - by Kian Mayne
    I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • How do I (robustly) remotely execute tasks on Windows workstations in a domain?

    - by Zac B
    I'm not even sure if "robustly" is a word. Anyway. Context: We have a few hundred Windows 7 workstations on a LAN. We use AD/GPO management pretty heavily, but there are a lot of periodic and/or manual maintenance tasks we need to do that can't be done via GPO/scheduled task. For example, say I want to execute program X (which runs silently, in the background, and doesn't bother the user) on workstation Y, or say I want to execute task A on a workstation group B either on a schedule or on demand. Kicking the users off of their computers to do this (i.e. using RDP) is a no-no, and doesn't work on groups anyway. Question: What's the best way to do this that is robust enough that, after setup, I could give it to beginner support people (read: people who are phobic of the command line, and get confused with GUI interfaces more complicated than Firefox)? I'm a competent programmer, and, if there is a robust set of tools or framework out there for this type of task, I'd consider hacking something together myself if it didn't take too long. If there's some combination of tools or techniques that others use to make remote-workstation-administration doable by beginners, I have yet to find it. For those who care about the "why": I'm midlevel IT, and was told to implement a remote management solution that allows arbitrary/scheduled remote execution, with confirmation that programs actually ran remotely, and the ability to view what they returned. "Why?" I asked, "Can't I just use PsExec and the task scheduler on a dispatcher machine?" "No," I was told, "'Joe' the second-week tech is going to be in charge of this one, and he needs something simple with a GUI." What I've tried: I've played with making a bunch of one-clickable "transfer files to remote computer and run them with PsExec" batch/VB scrips, but those tend to break down and don't easily support running on customizable groups. I've played a little bit with the Windows version of Puppet, but it doesn't support arbitrary-time remote execution (it's ability to group computers into a tree/node structure is really nice though). I've used an older version of Altiris, and, while it does a lot of what I want, it's interface is awful, it's slow, crashes a lot, and is probably too expensive for management. SwiftWater's DMS solution does some of what I want, but it's very underdeveloped, closed-source (not a deal breaker but not ideal), and I get the impression that support and reliability are lacking.

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • Moving default web site to another drive

    - by Chadworthington
    I set the default location from c:\inetpub\wwwroot to d:\inetpub\wwwroot but when I access my .NET 4.0 site get this error: Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. Source Error: Line 105: Set explicit="true" to force declaration of all variables. Line 106: --> Line 107: <compilation debug="true" strict="true" explicit="true" targetFramework="4.0"> Line 108: <assemblies> Line 109: <add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> When I try to Manage the Basic Settings on the Site and click the "Test Settings" button, I see that I have a problem under "authorization:" The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that <domain>\<computer_name>$ has Read access to the physical path. Then test these settings again. 1) Do I need to grant rights to IIS to the new folder? Which user? I thought it was something like IIS_USER or something similar but I cannot determine the correct name of the user. 2) Also, do I need to set the default version of the framework somewhere at the Default Site level or at the Virtual folder level? How is this done in IIS6, I am used to IIS5 or whatever came with XP Pro. 3) My original site had a subfolder under wwwroot called "aspnet_client." How was this cleated? I manually copied it to the corresponding new location. My app was using seperate ASP specific databases for storing session state and role info, if that is relevant. Thanks

    Read the article

  • Got Hacked. Want to understand how.

    - by gaoshan88
    Someone has, for the second time, appended a chunk of javascript to a site I help run. This javascript hijacks Google adsense, inserting their own account number, and sticking ads all over. The code is always appended, always in one specific directory (one used by a third party ad program), affects a number of files in a number of directories inside this one ad dir (20 or so) and is inserted at roughly the same overnight time. The adsense account belongs to a Chinese website (located in a town not an hour from where I will be in China next month. Maybe I should go bust heads... kidding, sort of), btw... here is the info on the site: http://serversiders.com/fhr.com.cn So, how could they append text to these files? Is it related to the permissions set on the files (ranging from 755 to 644)? To the webserver user (it's on MediaTemple so it should be secure, yes?)? I mean, if you have a file that has permissions set to 777 I still can't just add code to it at will... how might they be doing this? Here is a sample of the actual code for your viewing pleasure (and as you can see... not much to it. The real trick is how they got it in there): <script type="text/javascript"><!-- google_ad_client = "pub-5465156513898836"; /* 728x90_as */ google_ad_slot = "4840387765"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> Since a number of folks have mentioned it, here is what I have checked (and by checked I mean I looked around the time the files were modified for any weirdness and I grepped the files for POST statements and directory traversals: access_log (nothing around the time except normal (i.e. excessive) msn bot traffic) error_log (nothing but the usual file does not exist errors for innocuous looking files) ssl_log (nothing but the usual) messages_log (no FTP access in here except for me)

    Read the article

  • Why is domU faster than dom0 on IO?

    - by Paco
    I have installed debian 7 on a physical machine. This is the configuration of the machine: 3 hard drives using RAID 5 Strip element size: 1M Read policy: Adaptive read ahead Write policy: Write Through /boot 200 MB ext2 / 15 GB ext3 SWAP 10GB LVM rest (~500GB) emphasized text I installed postgresql, created a big database (over 1GB). I have an SQL request that takes a lot of time to run (a SELECT statement, so it only reads data from the database). This request takes approximately 5.5 seconds to run. Then, I installed XEN, created a domU, with another debian distro. On this OS, I also installed postgresql, with the same database. The same SQL request takes only 2.5 seconds to run. I checked the kernel on both dom0 and domU. uname-a returns "Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux" on both systems. I checked the kernel parameters, which are approximately the same. For those that are relevant, I changed their values to make them match on both systems using sysctl. I saw no changes (the requests still take the same amount of time). After this, I checked the file systems. I used ext3 on domU. Still no changes. I installed hdparm, and ran hdparm -Tt on both systems, on all my partitions on both systems, and I get similar results. Now, I am stuck, I don't know what is different, and what could be the cause of such a big difference. Additional Info: Debian runs on a Dell server PowerEdge 2950 postgresql: 9.1.9 (both dom0 and domU) xen-linux-system: 3.2.0 xen-hypervisor: 4.1 Thanks EDIT: As Krzysztof Ksiezyk suggested, it might be due to some file caching system. I ran the dd command to test both the read and write speed. Here is domU: root@test1:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 18.8289 s, 107 MB/s root@test1:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 15.0549 s, 134 MB/s And here is dom0: root@debian:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 8.87281 s, 191 MB/s root@debian:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 0.501509 s, 3.4 GB/s What can be the cause of this caching system? And how can we "fix" it? Can we apply it to dom0? EDIT 2: I switched my virtual disk type. To do so I followed this article. I did a dd if=/dev/vg0/test1-disk of=/mnt/test1-disk.img bs=16M Then in /etc/xen/test1.cfg, I changed the disk parameter to use file: instead of phy: it should have removed the file caching, but I still get the same numbers (domU being much faster for Postgres)

    Read the article

  • route http and ssh traffic normally, everything else via vpn tunnel

    - by Normadize
    I've read quite a bit and am close, I feel, and I'm pulling my hair out ... please help! I have an OpenVPN cliend whose server sets local routes and also changes the default gw (I know I can prevent that with --route-nopull). I'd like to have all outgoing http and ssh traffic via the local gw, and everything else via the vpn. Local IP is 192.168.1.6/24, gw 192.168.1.1. OpenVPN local IP is 10.102.1.6/32, gw 192.168.1.5 OpenVPN server is at {OPENVPN_SERVER_IP} Here's the route table after openvpn connection: # ip route show table main 0.0.0.0/1 via 10.102.1.5 dev tun0 default via 192.168.1.1 dev eth0 proto static 10.102.1.1 via 10.102.1.5 dev tun0 10.102.1.5 dev tun0 proto kernel scope link src 10.102.1.6 {OPENVPN_SERVER_IP} via 192.168.1.1 dev eth0 128.0.0.0/1 via 10.102.1.5 dev tun0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 1 This makes all packets go via to the VPN tunnel except those destined for 192.168.1.0/24. Doing wget -qO- http://echoip.org shows the vpn server's address, as expected, the packets have 10.102.1.6 as source address (the vpn local ip), and are routed via tun0 ... as reported by tcpdump -i tun0 (tcpdump -i eth0 sees none of this traffic). What I tried was: create a 2nd routing table holding the 192.168.1.6/24 routing info (copied from the main table above) add an iptables -t mangle -I PREROUTING rule to mark packets destined for port 80 add an ip rule to match on the mangled packet and point it to the 2nd routing table add an ip rule for to 192.168.1.6 and from 192.168.1.6 to point to the 2nd routing table (though this is superfluous) changed the ipv4 filter validation to none in net.ipv4.conf.tun0.rp_filter=0 and net.ipv4.conf.eth0.rp_filter=0 I also tried an iptables mangle output rule, iptables nat prerouting rule. It still fails and I'm not sure what I'm missing: iptables mangle prerouting: packet still goes via vpn iptables mangle output: packet times out Is it not the case that to achieve what I want, then when doing wget http://echoip.org I should change the packet's source address to 192.168.1.6 before routing it off? But if I do that, the response from the http server would be routed back to 192.168.1.6 and wget would not see it as it is still bound to tun0 (the vpn interface)? Can a kind soul please help? What commands would you execute after the openvpn connects to achieve what I want? Looking forward to hair regrowth ...

    Read the article

  • nginx+django serving static files

    - by avalore
    I have followed instruction for setting up django with nginx from the django wiki (https://code.djangoproject.com/wiki/DjangoAndNginx) and have nginx setup as follows (a few name changes to fit my setup). user nginx nginx; worker_processes 2; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /static/ { root /srv/static/; } location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js|mov) { access_log off; expires 30d; } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_param REMOTE_ADDR $remote_addr; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } } Static files aren't being served (nginx 404). If I look in the access log it seems nginx is looking in /etc/nginx/html/static... rather than /srv/static/ as specified in the config. I've no clue why it's doing this, any help would be hugely appreciated.

    Read the article

  • can't send with postfix but I can whith one user

    - by CvR_XX
    I have a postfix and dovecot server but when i try to send an email i get an time -out. Im trying to send with the email [email protected]. A telnet session isn't helping much ether. I get a blank screen. Local it's working fine. My smtp service is running on treadity.com:25. The strange thing is that the logs are completely empty with any info regarding sending emails. Receiving is working alright. Another strange thing is that i've send some message's and that it worked. But that is only with one email. I can still send from that account but other emails are failing any idea's? config file: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/ssl/certs/dovecot.pem smtpd_tls_key_file=/etc/ssl/private/dovecot.pem smtpd_use_tls=yes smtpd_tls_auth_only = yes #Enabling SMTP for authenticated users, and handing off authentication to Dovecot smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes 1,1 Top

    Read the article

  • Recovering data from failed Raid configuration with 4 drives and two raid sets (Asus P6T / Intel ICH10r)

    - by user56365
    I've added the complete detailed version for my question below for those who can help, but want to quickly summarize my question first. I setup two Raid arrays using (4) WD Raptors, a striped set for the OS and 1+0 set for crucial data. After booting once out of the 50 times a cable fell out, the drive wasn't recognized in the array anymore. After trying to fix it, another drive did the same. I now have two drives remaining, luckily with the parity information. I know the striped set is gone, but I need the data on the other set. Can anyone recommend anything to recover the data, or fix the two drives that doesn't allow the raid controller to recognize the drives, even though they are listed on the utility screen as still apart of the configuration but that they are not found? More Details I recently upgraded to a ASUS P6T motherboard with an Intel ICH10R raid controller and changed my previous 4 drive raid array from strictly a Raid 1+0 set to a Raid 0 for the OS/Page/Scratch drive and a Raid 1+0 set for crucial data. I never had problems after upgrading with my configuration, even when a drive died and was replaced. I managed to rebuild the array fine. Unfortunately this time around, a cable came unattached and I booted my system up until the raid status screen with the degraded error. This shouldn't have been a problem, but after I attached the drive it was no longer recognized as a member in the array. Both drives actually show up as a non-member disk. I've spent a very, very long time online trying to find information or support and haven't had much luck. After spending time trying to scan the drive for errors, damaged partition info, etc.. another drive in the set decided it didn't want to be recognized as a part of the array. At this point, I have two out of the four drives still functioning, but the Raid 1+0 array went from degraded to failed and I must find a way to retrieve that data. I think the two drives still in the array have the parity information because they show up as OS (110GB),BACKUP(80GB) and OS:1(110GB),BACKUP(80GB) under windows data management. The other two are simply 74gb Raw unallocated Is it possible recover the data using those two drive only, and which tool would I use? Could it be a simple partition table or any other error that is repairable with hard drive utilities out there? I know the Raid 0 set is done for, but I would assume because the correct drives failed in a 1+0 config to save the data I can retrieve it some how.

    Read the article

  • Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

    - by amn
    Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

    Read the article

  • Alienware m15x (older model) BSOD investigation

    - by Crishu
    A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

    Read the article

  • Recover strategy single bad sector in moricon

    - by Damon
    This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

    Read the article

  • installed mongo using brew but stuck at prompt

    - by user50946
    I have installed mongo using brew on my mac. When I give mongo command I see this MongoDB shell version: 2.4.6 connecting to: test but it stays there and never give me command prompt back anyone else noticed something like this I have reinstalled with no luck. The issue is persistent thanks Logs ***** SERVER RESTARTED ***** Fri Oct 18 08:11:48.360 [initandlisten] MongoDB starting : pid=2081 port=27017 dbpath=/usr/local/var/mongodb 64-bit host=Asims-MacBook-Air.local Fri Oct 18 08:11:48.360 [initandlisten] db version v2.4.6 Fri Oct 18 08:11:48.360 [initandlisten] git version: nogitversion Fri Oct 18 08:11:48.360 [initandlisten] build info: Darwin minimountain.local 12.5.0 Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64 x86_64 BOOST_LIB_VERSION=1_49 Fri Oct 18 08:11:48.360 [initandlisten] allocator: tcmalloc Fri Oct 18 08:11:48.360 [initandlisten] options: { bind_ip: "127.0.0.1", config: "/usr/local/etc/mongod.conf", dbpath: "/usr/local/var/mongodb", logappend: "true", logpath: "/usr/local/var/log/mongodb/mongo.log" } Fri Oct 18 08:11:48.361 [initandlisten] journal dir=/usr/local/var/mongodb/journal Fri Oct 18 08:11:48.361 [initandlisten] recover : no journal files present, no recovery needed Fri Oct 18 08:11:48.398 [websvr] admin web console waiting for connections on port 28017 Fri Oct 18 08:11:48.398 [initandlisten] waiting for connections on port 27017 Fri Oct 18 08:12:03.279 [signalProcessingThread] got signal 1 (Hangup: 1), will terminate after current cmd ends Fri Oct 18 08:12:03.279 [signalProcessingThread] now exiting Fri Oct 18 08:12:03.279 dbexit: Fri Oct 18 08:12:03.279 [signalProcessingThread] shutdown: going to close listening sockets... Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 9 Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 10 Fri Oct 18 08:12:03.280 [signalProcessingThread] closing listening socket: 11 Fri Oct 18 08:12:03.280 [signalProcessingThread] removing socket file: /tmp/mongodb-27017.sock Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to flush diaglog... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to close sockets... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: waiting for fs preallocator... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: lock for final commit... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: final commit... Fri Oct 18 08:12:03.282 [signalProcessingThread] shutdown: closing all files... Fri Oct 18 08:12:03.282 [signalProcessingThread] closeAllFiles() finished

    Read the article

  • only removing index.php rule works on my NginX and CodeIgniter as rewrite. Why?

    - by Atomei Cosmin
    I am very new in rewriting in nginx but although I've spent 2 days reading on forums, I still can't get some Codeigniter rewrites working ... server { listen *:80; server_name artademy.com www.artademy.com; root /var/www/artademy.com/web; index index.html index.htm index.php index.cgi index.pl index.xhtml; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1; } if (!-e $request_filename) { rewrite ^/(index.php\?)/(.*)$ /$1/mobile_app last; break; } error_log /var/log/ispconfig/httpd/artademy.com/error.log; access_log /var/log/ispconfig/httpd/artademy.com/access.log combined; ## Disable .htaccess and other hidden files location ~ /\. { deny all; access_log off; log_not_found off; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location /stats { index index.html index.php; auth_basic "Members Only"; auth_basic_user_file /var/www/clients/client0/web3/.htpasswd_stats; } location ^~ /awstats-icon { alias /usr/share/awstats/icon; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9012; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_intercept_errors on; } } Codeigniter settings are: well for uri_protocol: REQUEST_URI; What i noticed is that from this rule: rewrite ^/(.)$ /index.php?/$1; it works ever if i write it like this: rewrite ^/(.)$ /index.php?; It might be a wild guess but it stops at the question mark... Anyhow what I need are rules as these from .htaccess: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{QUERY_STRING} ^lang=([a-z]{2})$ RewriteRule ^([a-z]{2})$ index.php?/home_page?lang=$1 [L,QSA] RewriteRule ^([a-z]{2})$ index.php?/home_page?lang=$1 [L,QSA] #how_it_works RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^how-it-works/(en)$ index.php?/how_it_works?lang=en [L,QSA] #order_status RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^order-status/(en)$ index.php?/order_status?lang=en [L,QSA] Can anyone tell me what i'm doing wrong and show me a proper way for at least one rule? It would be more than helpful. Thank you in advance! ^^ PS: I made it work on apache by using Path_info for uri_protocol.. if this info is of any help, and i remember having kind of the same problem there too but switching to path_info made it all good.

    Read the article

  • Linux service --status-all shows "Firewall is stopped." what service does firewall refer to?

    - by codewaggle
    I have a development server with the lamp stack running CentOS: [Prompt]# cat /etc/redhat-release CentOS release 5.8 (Final) [Prompt]# cat /proc/version Linux version 2.6.18-308.16.1.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Oct 2 22:50:05 EDT 2012 [Prompt]# yum info iptables Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.anl.gov * extras: centos.mirrors.tds.net * rpmfusion-free-updates: mirror.us.leaseweb.net * rpmfusion-nonfree-updates: mirror.us.leaseweb.net * updates: mirror.steadfast.net Installed Packages Name : iptables Arch : x86_64 Version : 1.3.5 Release : 9.1.el5 Size : 661 k Repo : installed .... Snip.... When I run: service --status-all Part of the output looks like this: .... Snip.... httpd (pid xxxxx) is running... Firewall is stopped. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) ....Snip.... iptables has been loaded to the kernel and is active as represented by the rules being displayed. Checking just the iptables returns the rules just like status all does: [Prompt]# service iptables status Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) .... Snip.... Starting or restarting iptables indicates that the iptables have been loaded to the kernel successfully: [Prompt]# service iptables restart Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] [Prompt]# service iptables start Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] I've googled "Firewall is stopped." and read a number of iptables guides as well as the RHEL documentation, but no luck. As far as I can tell, there isn't a "Firewall" service, so what is the line "Firewall is stopped." referring to?

    Read the article

  • VPN Connection Causes Internal LAN Connection Loss with Server

    - by sleepisfortheweak
    I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

    Read the article

  • linux disk usage report inconsistancy after removing file. cpanel inaccurate disk usage report

    - by brando
    relevant software: Red Hat Enterprise Linux Server release 6.3 (Santiago) cpanel installed 11.34.0 (build 7) background and problem: I was getting a disk usage warning (via cpanel) because /var seemed to be filling up on my server. The assumption would be that there was a log file growing too large and filling up the partition. I recently removed a large log file and changed my syslog config to rotate the log files more regularly. I removed something like /var/log/somefile and edited /etc/rsyslog.conf. This is the reason I was suspicious of the disk usage report warning issued by cpanel that I was getting because it didn't seem right. This is what df was reporting for the partitions: $ [/var]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 511M 8.9G 6% / tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/sda1 99M 53M 42M 56% /boot /dev/sda8 883G 384G 455G 46% /home /dev/sdb1 9.9G 151M 9.3G 2% /tmp /dev/sda3 9.9G 7.8G 1.6G 84% /usr /dev/sda5 9.9G 9.3G 108M 99% /var This is what du was reporting for /var mount point: $ [/var]# du -sh 528M . clearly something funky was going on. I had a similar kind of reporting inconsistency in the past and I restarted the server and df reporting seemed to be correct after that. I decided to reboot the server to see if the same thing would happpen. This is what df reports now: $ [~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 511M 8.9G 6% / tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/sda1 99M 53M 42M 56% /boot /dev/sda8 883G 384G 455G 46% /home /dev/sdb1 9.9G 151M 9.3G 2% /tmp /dev/sda3 9.9G 7.8G 1.6G 84% /usr /dev/sda5 9.9G 697M 8.7G 8% /var This looks more like what I'd expect to get. For consistency this is what du reports for /var: $ [/var]# du -sh 638M . question: This is a nuisance. I'm not sure where the disk usage reports issued by cpanel get their info but it clearly isn't correct. How can I avoid this inaccurate reporting in the future? It seems like df reporting wrong disk usage is a strong indicator of the source problem but I'm not sure. Is there a way to 'refresh' the filesystem somehow so that the df report is accurate without restarting the server? Any other ideas for resolving this issue?

    Read the article

  • cd Command Linux and Mystery Flags

    - by Jason R. Mick
    Platform: CentOS 6.2 Shell:tcsh I'm playing around with cd for a BASH script, and noticed the wondrous cd - option, but was left with many questions... Why the cd -? Isn't this redundant with cd ..? EDIT [As FatalError points out, these two commands don't do the same things... so the answer is "no"] Can you delve farther back into your history with - flag, a la in a browser? e.g. When I type cd -, it takes me to my previous directory, but then if I enter that command again, it takes me to the directory I just came from, creating a sort of loop. Is a shorthand for going back multiple levels supported?EDITI realize I can go back with cd .., but was hoping this could be a gateway to a less verbose deep back, e.g. cd -3 vs. cd ../../../ ... hopefully that clarifies what I'm asking....EDIT2As to the current feedback, while .. is a special directory, I don't see a reason why the built-in cd to the terminal couldn't use a shorthand for ../../ ... ../ e.g. cd ..5 or why the built-in also couldn't have a history (a la auto pushd/popd) that could be turned on and used like cd -3. I get that this could be somewhat of security/privacy risk, but I don't see how it's any worst than storing a command history, which most shells/terminals do. The manpage for cd, accessible via man cd and help cd (it's the same for either command), only lists -L and -P flags. However when I type in cd --help it outputs Usage: cd [-plvn][-|<dir>].. Am I right in assuming the other flags and the - (back) option are nonstandard? What are the -n and -v flags for? Both seem to take me back to my home directory, that's all I've been able to figure out via experimentation. A quick read on web resources [1][2] offered just the same sort of info that the man page did and didn't answer my questions. Note: The second Linux-centric resource above claimed cd only had two options (obviously not true in current CentOS) hence my assumption that this functionality could be non-standard.

    Read the article

< Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >