context info - Page 678

DVD not detected?

- by Benjamin

As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

Read the article

ASP.NET WebAPI Security 2: Identity Architecture

- by Your DisplayName here!

Pedro has beaten me to the punch with a detailed post (and diagram) about the WebAPI hosting architecture. So go read his post first, then come back so we can have a closer look at what that means for security. The first important takeaway is that WebAPI is hosting independent- currently it ships with two host integration implementations – one for ASP.NET (aka web host) and WCF (aka self host). Pedro nicely shows the integration into the web host. Self hosting is not done yet so we will mainly focus on the web hosting case and I will point out security related differences when they exist. The interesting part for security (amongst other things of course) is the HttpControllerHandler (see Pedro’s diagram) – this is where the host specific representation of an HTTP request gets converted to the WebAPI abstraction (called HttpRequestMessage). The ConvertRequest method does the following: Create a new HttpRequestMessage. Copy URI, method and headers from the HttpContext. Copies HttpContext.User to the Properties<string, object> dictionary on the HttpRequestMessage. The key used for that can be found on HttpPropertyKeys.UserPrincipalKey (which resolves to “MS_UserPrincipal”). So the consequence is that WebAPI receives whatever IPrincipal has been set by the ASP.NET pipeline (in the web hosting case). Common questions are: Are there situations where is property does not get set? Not in ASP.NET – the DefaultAuthenticationModule in the HTTP pipeline makes sure HttpContext.User (and Thread.CurrentPrincipal – more on that later) are always set. Either to some authenticated user – or to an anonymous principal. This may be different in other hosting environments (again more on that later). Why so generic? Keep in mind that WebAPI is hosting independent and may run on a host that materializes identity completely different compared to ASP.NET (or .NET in general). This gives them a way to evolve the system in the future. How does WebAPI code retrieve the current client identity? HttpRequestMessage has an extension method called GetUserPrincipal() which returns the property as an IPrincipal. A quick look at self hosting shows that the moral equivalent of HttpControllerHandler.ConvertRequest() is HttpSelfHostServer.ProcessRequestContext(). Here the principal property gets only set when the host is configured for Windows authentication (inconsisteny). Do I like that? Well – yes and no. Here are my thoughts: I like that it is very straightforward to let WebAPI inherit the client identity context of the host. This might not always be what you want – think of an ASP.NET app that consists of UI and APIs – the UI might use Forms authentication, the APIs token based authentication. So it would be good if the two parts would live in a separate security world. It makes total sense to have this generic hand off point for identity between the host and WebAPI. It also makes total sense for WebAPI plumbing code (especially handlers) to use the WebAPI specific identity abstraction. But – c’mon we are running on .NET. And the way .NET represents identity is via IPrincipal/IIdentity. That’s what every .NET developer on this planet is used to. So I would like to see a User property of type IPrincipal on ApiController. I don’t like the fact that Thread.CurrentPrincipal is not populated. T.CP is a well established pattern as a one stop shop to retrieve client identity on .NET. That makes a lot of sense – even if the name is misleading at best. There might be existing library code you want to call from WebAPI that makes use of T.CP (e.g. PrincipalPermission, or a simple .Name or .IsInRole()). Having the client identity as an ambient property is useful for code that does not have access to the current HTTP request (for calling GetUserPrincipal()). I don’t like the fact that that the client identity conversion from host to WebAPI is inconsistent. This makes writing security plumbing code harder. I think the logic should always be: If the host has a client identity representation, copy it. If not, set an anonymous principal on the request message. Btw – please don’t annoy me with the “but T.CP is static, and static is bad for testing” chant. T.CP is a getter/setter and, in fact I find it beneficial to be able to set different security contexts in unit tests before calling in some logic. And, in case you have wondered – T.CP is indeed thread static (and the name comes from a time where a logical operation was bound to a thread – which is not true anymore). But all thread creation APIs in .NET actually copy T.CP to the new thread they create. This is the case since .NET 2.0 and is certainly an improvement compared to how Win32 does things. So to sum it up: The host plumbing copies the host client identity to WebAPI (this is not perfect yet, but will surely be improved). or in other words: The current WebAPI bits don’t ship with any authentication plumbing, but solely use whatever authentication (and thus client identity) is set up by the host. WebAPI developers can retrieve the client identity from the HttpRequestMessage. Hopefully my proposed changes around T.CP and the User property on ApiController will be added. In the next post, I will detail how to add WebAPI specific authentication support, e.g. for Basic Authentication and tokens. This includes integrating the notion of claims based identity. After that we will look at the built-in authorization bits and how to improve them as well. Stay tuned.

Read the article

Check Your Spelling, Grammar, and Style in Firefox and Chrome

- by Matthew Guay

Are you tired of making simple writing mistakes that get past your browser’s spell-check? Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks. Even webapps like Google Docs don’t check more than basic spelling errors. However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system. This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing. To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected. Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it. Click Cancel to go back and check your writing first. To change the After the Deadline settings, click its icon in the toolbar and select View Options. Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome. Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome. To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar. Click Tools, then select AtD Preferences. In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page. Here you can make After the Deadline as correction-happy as you like. Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever. Even our insignificant tweets are being archived in the Library of Congress. After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible. Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

Read the article

Profit's COLLABORATE 10 Session Selections

- by Aaron Lazenby

COLLABORATE 2010 is a mere 11 days away (thanks for the reminder @ocp_advisor). Every year I publish my a list of the sessions I think reflect some of the more interesting people/trends in enterprise IT. I should be at all of these sessions, so drop by for a chat--I'll be the guy tapping out emails on my iPad... Monday, April 19 9:15 a.m. - Keynote: Transforming Customer Value, Delivering Highest Customer Service Location: Keynote Hall I never miss Charles Phillips when he speaks--it's one of the best opportunities to get an update on Oracle product developments and strategy. And there's certainly occasion for an update: this will be Phillips' first big presentation since the Oracle + Sun Strategy Update in late January. Phillips is appearing with Oracle Executive Vice President of Development Thomas Kurian which means there should be some excellent information about how customers are using Oracle's complete software and hardware stack to address enterprise IT challenges. The session should provide some excellent context for the rest of the week's session...don't miss it. 10:45 a.m. - Oracle Fusion Applications: Functional Overview Location: South Seas FI met Basheer Khan at COLLABORATE 08 in Denver and have followed his work ever since. He's a former member of the OAUG Board of Directors, an Oracle ACE, and a charismatic enterprise IT expert. Having worked with the Oracle Usability Advisory Board, Basheer should have some fascinating insights to share about the features and interface of Oracle's Fusine Applications. This session, along with Nadia Bendjedou's "10 Things You Can Do Today to Prepare for the Next Generation Applications" (on Tuesday, April 20 8:00 a.m. in room 3662) should give attendees the update they need about Oracle's next-generation applications. 1:15p.m. - E-Business Suite in the Amazon Cloud Location: South Seas HI did my first full-fledged cloud computing coverage at last year's COLLABORATE show (check out my interview with Oracle's Bill Hodak), where I first learned about Amazon's EC2 offering. I've since talked with several people who have provisioned server space on Amazon's cloud with great results. So I'm looking forward to watching the audience configure an instance of the Oracle E-Business Suite release 12 on the cloud while Chuck Edwards from Blue Gecko drives. This session should take some of the mist and vapor out of the cloud conversation.2:30 p.m. - "Zero Sign-on" to EBS - Enabling 96000 Users to Login to EBS Without User Maintenance Location: South Seas HI'll be sitting tight in South Seas H for the next session on Monday where Doug Pepka, a ten-year veteran of communications giant Comcast, will be walking attendees through a massive single sign-on (SSO) project across the enterprise. I'm working on a story about SSO for the August issue of Profit, so this session has real practical value to me. Plus the proliferation of user account logins--both personal and professional--makes this a critical usability/change management issue for IT leaders planning for successful long-term IT implementations. Tuesday 8:00 am - Information Architecture for Men in Kilts Location: SURF AGetting to a 8:00 a.m. presentation is a tall order in Las Vegas, but presenter Billy Cripe will make it worth your effort. Not only is the title of this session great, but the content should appeal to any IT strategist looking to push the limits of Web 2.0 technologies in the enterprise. Cripe is a product management director of Enterprise 2.0 and Enterprise Content Management at Oracle, author of Reshaping Your Business with Web 2.0, and a prolific blogger--he knows how information architecture is critical to and enterprise 2.0 implementation. 10:30a.m. - Oracle Virtualization: From Desktop to Data Center Location: REEF FData center virtualization is still one of the best ways to reduce the cost of running enterprise IT. With the addition of Sun products, Oracle has the industry's most comprehensive virtualization portfolio. I must admit, I'm no expert in this subject. So I'm looking forward to Monica Kumar's presentation so I can get up to speed. Wednesday 8:00 a.m. - The Art of the Steal Location: Mandalay Bay Ballroom JMany will know Frank Abagnale from Steven Spielberg's 2002 film "Catch Me if You Can." The one-time con man and international fugitive who swindled $2.5 million in forged checks went on to help U.S. federal officials investigate fraud cases. Now the CEO of Abagnale and Associates, he has become an invaluable source to the business world on the subject of fraud and fraud protection. With identity theft and digital fraud still on the rise, this session should be an entertaining, and sobering, education on the threats facing businesses and customers around the world. A great way to start Wednesday.1:00 p.m. - Google Wave: Will it replace e-mail as we know it today? Location: SURF EBy many assessments (my own included), Google Wave is a bit of an open collaboration failure. It may seem like an odd reason for me to be excited about this session, but I'm looking forward to the chance to revisit the technology. Also, this is a great case study in connecting free, available Internet tools to existing enterprise computing environments--an issue that IT strategists must contend with as workers spreads out and choose their own productivity tools.

Read the article

Resetting Your Oracle User Password with SQL Developer

- by thatjeffsmith

There’s nothing more annoying than having to email, call, or log a support ticket to have one of your accounts reset. This is no less annoying in the Oracle database. Those pesky security folks have determined that your password should only be valid for X days, and your time is up. Time to reset the password! Except…you can’t log into the database to reset your password. What now? Wait a second, look at this nifty thing I see in SQL Developer: Right click on my connection, reset password not available! Why not? The JDBC Driver Doesn’t Support This Operation We can’t make this call over the Oracle JDBC layer, because it hasn’t been implemented. However our primary interface, OCI, does indeed support this. In order to use the Oracle Call Interface (OCI), you need to have an Oracle Client on your machine. The good news is that this is fairly easy to get going. The Instant Client will do. You have two options, the full or ‘Lite’ Instant Clients. If you want SQL*Plus and the other client tools, go for the full. If you just want the basic drivers, go for the Lite. Either of these is fine, but mind the bit level and version of Oracle! Make sure you get a 32 bit Instant Client if you run 32 bit SQL Developer or 64 bit if you run 64 Here’s the download link What, you didn’t believe me? Mind the version of Oracle too! You want to be at the same level or higher of the database you’re working with. You can use a 11.2.0.3 client with 11.2.0.1 database but not a 10gR2 client with 11gR2 database. Clear as mud? Download and Extract Put it where you want – Program Files is as good as place as any if you have the rights. When you’re done, copy that directory path you extracted the archive to, because we’re going to add it to your Windows PATH environment variable. The easiest way to find this in Windows 7 is to open the Start dialog and type ‘path’. In Windows 8 you’ll cast your spell and wave at your screen until something happens. I recommend you put it up front so we find our DLLs first. Now with that set, let’s start up SQL Developer. Check the Connection Context menu again Bingo! What happened there? SQL Developer looks to see if it can find the OCI resources. Guess where it looks? That’s right, the PATH. If it finds what it’s looking for, and confirms the bit level is right, it will activate the Reset Password option. We have a Preference to ‘force’ an OCI/THICK connection that gives you a few other edge case features, but you do not need to enable this to activate the Reset Password. Not necessary, but won’t hurt anything either. There are a few actual benefits to using OCI powered connections, but that’s beyond the scope of today’s blog post…to be continued. Ok, so we’re ready to go. Now, where was I again? Oh yeah, my password has expired… Right click on your connection and now choose ‘Reset Password’ You’ll need to know your existing password and select a new one that meets your databases’s security standards. I Need Another Option, This Ain’t Working! If you have another account in the database, you can use the DBA Panel to reset a user’s password, or of course you can spark up a SQL*Plus session and issue the ALTER USER JEFF IDENTIFIED BY _________; command – but you knew this already, yes? I need more help ‘installing’ the Instant Client, help! There are lots and lots of resources out there on this subject. But I also know from personal experience that many of you have problems getting this to ‘work.’ The key things to remember is to download the right bit level AND make sure the client install directory is in your path. I know many folks that will just ‘install’ the Instant Client directly to one of their ‘bin’ type directories. You can do that if you want, but I prefer the cleaner method. Of course if you lack admin privs to change the PATH variable, that might be your only option. Or you could do what the original ORA- message indicated and ‘contact your DBA.’

Read the article

Aggregating cache data from OCEP in CQL

- by Manju James

There are several use cases where OCEP applications need to join stream data with external data, such as data available in a Coherence cache. OCEP’s streaming language, CQL, supports simple cache-key based joins of stream data with data in Coherence (more complex queries will be supported in a future release). However, there are instances where you may need to aggregate the data in Coherence based on input data from a stream. This blog describes a sample that does just that. For our sample, we will use a simplified credit card fraud detection use case. The input to this sample application is a stream of credit card transaction data. The input stream contains information like the credit card ID, transaction time and transaction amount. The purpose of this application is to detect suspicious transactions and send out a warning event. For the sake of simplicity, we will assume that all transactions with amounts greater than $1000 are suspicious. The transaction history is available in a Coherence distributed cache. For every suspicious transaction detected, a warning event must be sent with maximum amount, total amount and total number of transactions over the past 30 days, as shown in the diagram below. Application Input Stream input to the EPN contains events of type CCTransactionEvent. This input has to be joined with the cache with all credit card transactions. The cache is configured in the EPN as shown below: <wlevs:caching-system id="CohCacheSystem" provider="coherence"/> <wlevs:cache id="CCTransactionsCache" value-type="CCTransactionEvent" key-properties="cardID, transactionTime" caching-system="CohCacheSystem"> </wlevs:cache> Application Output The output that must be produced by the application is a fraud warning event. This event is configured in the spring file as shown below. Source for cardHistory property can be seen here. <wlevs:event-type type-name="FraudWarningEvent"> <wlevs:properties type="tuple"> <wlevs:property name="cardID" type="CHAR"/> <wlevs:property name="transactionTime" type="BIGINT"/> <wlevs:property name="transactionAmount" type="DOUBLE"/> <wlevs:property name="cardHistory" type="OBJECT"/> </wlevs:properties </wlevs:event-type> Cache Data Aggregation using Java Cartridge In the output warning event, cardHistory property contains data from the cache aggregated over the past 30 days. To get this information, we use a java cartridge method. This method uses Coherence’s query API on credit card transactions cache to get the required information. Therefore, the java cartridge method requires a reference to the cache. This may be set up by configuring it in the spring context file as shown below: <bean class="com.oracle.cep.ccfraud.CCTransactionsAggregator"> <property name="cache" ref="CCTransactionsCache"/> </bean> This is used by the java class to set a static property: public void setCache(Map cache) { s_cache = (NamedCache) cache; } The code snippet below shows how the total of all the transaction amounts in the past 30 days is computed. Rest of the information required by CardHistory object is calculated in a similar manner. Complete source of this class can be found here. To find out more information about using Coherence's API to query a cache, please refer Coherence Developer’s Guide. public static CreditHistoryData(String cardID) { … Filter filter = QueryHelper.createFilter("cardID = :cardID and transactionTime :transactionTime", map); CardHistoryData history = new CardHistoryData(); Double sum = (Double) s_cache.aggregate(filter, new DoubleSum("getTransactionAmount")); history.setTotalAmount(sum); … return history; } The java cartridge method is used from CQL as seen below: select cardID, transactionTime, transactionAmount, CCTransactionsAggregator.execute(cardID) as cardHistory from inputChannel where transactionAmount1000 This produces a warning event, with history data, for every credit card transaction over $1000. That is all there is to it. The complete source for the sample application, along with the configuration files, is available here. In the sample, I use a simple java bean to load the cache with initial transaction history data. An input adapter is used to create and send transaction events for the input stream.

Read the article

Find odd and even rows using $.inArray() function when using jQuery Templates

- by hajan

In the past period I made series of blogs on ‘jQuery Templates in ASP.NET’ topic. In one of these blogs dealing with jQuery Templates supported tags, I’ve got a question how to create alternating row background. When rendering the template, there is no direct access to the item index. One way is if there is an incremental index in the JSON string, we can use it to solve this. If there is not, then one of the ways to do this is by using the jQuery’s $.inArray() function. - $.inArray(value, array) – similar to JavaScript indexOf() Here is an complete example how to use this in context of jQuery Templates: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <style type="text/css"> #myList { cursor:pointer; } .speakerOdd { background-color:Gray; color:White;} .speaker { background-color:#443344; color:White;} .speaker:hover { background-color:White; color:Black;} .speakerOdd:hover { background-color:White; color:Black;} </style> <title>jQuery ASP.NET</title> <script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.min.js" type="text/javascript"></script> <script src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.min.js" type="text/javascript"></script> <script language="javascript" type="text/javascript"> var speakers = [ { Name: "Hajan1" }, { Name: "Hajan2" }, { Name: "Hajan3" }, { Name: "Hajan4" }, { Name: "Hajan5" } ]; $(function () { $("#myTemplate").tmpl(speakers).appendTo("#myList"); }); function oddOrEven() { return ($.inArray(this.data, speakers) % 2) ? "speaker" : "speakerOdd"; } </script> <script id="myTemplate" type="text/x-jquery-tmpl"> <tr class="${oddOrEven()}"> <td> ${Name}</td> </tr> </script> </head> <body> <table id="myList"></table> </body> </html> So, I have defined stylesheet classes speakerOdd and speaker as well as corresponding :hover styles. Then, you have speakers JSON string containing five items. And what is most important in our case is the oddOrEven function where $.inArray(value, data) is implemented. function oddOrEven() { return ($.inArray(this.data, speakers) % 2) ? "speaker" : "speakerOdd"; } Remark: The $.inArray() method is similar to JavaScript's native .indexOf() method in that it returns -1 when it doesn't find a match. If the first element within the array matches value, $.inArray() returns 0. From http://api.jquery.com/jQuery.inArray/ So, now we can call oddOrEven function from inside our jQuery Template in the following way: <script id="myTemplate" type="text/x-jquery-tmpl"> <tr class="${oddOrEven()}"> <td> ${Name}</td> </tr> </script> And the result is I hope you like it. Regards, Hajan

Read the article

Nesting Linq-to-Objects query within Linq-to-Entities query –what is happening under the covers?

- by carewithl

var numbers = new int[] { 1, 2, 3, 4, 5 }; var contacts = from c in context.Contacts where c.ContactID == numbers.Max() | c.ContactID == numbers.FirstOrDefault() select c; foreach (var item in contacts) Console.WriteLine(item.ContactID); Linq-to-Entities query is first translated into Linq expression tree, which is then converted by Object Services into command tree. And if Linq-to-Entities query nests Linq-to-Objects query, then this nested query also gets translated into an expression tree. a) I assume none of the operators of the nested Linq-to-Objects query actually get executed, but instead data provider for particular DB (or perhaps Object Services) knows how to transform the logic of Linq-to-Objects operators into appropriate SQL statements? b) Data provider knows how to create equivalent SQL statements only for some of the Linq-to-Objects operators? c) Similarly, data provider knows how to create equivalent SQL statements only for some of the non-Linq methods in the Net Framework class library? EDIT: I know only some Sql so I can't be completely sure, but reading Sql query generated for the above code it seems data provider didn't actually execute numbers.Max method, but instead just somehow figured out that numbers.Max should return the maximum value and then proceed to include in generated Sql query a call to TSQL's build-in MAX function. It also put all the values held by numbers array into a Sql query. SELECT CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN '0X0X' ELSE '0X1X' END AS [C1], [Extent1].[ContactID] AS [ContactID], [Extent1].[FirstName] AS [FirstName], [Extent1].[LastName] AS [LastName], [Extent1].[Title] AS [Title], [Extent1].[AddDate] AS [AddDate], [Extent1].[ModifiedDate] AS [ModifiedDate], [Extent1].[RowVersion] AS [RowVersion], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[CustomerTypeID] END AS [C2], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[InitialDate] END AS [C3], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryDesintation] END AS [C4], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryDestination] END AS [C5], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryActivity] END AS [C6], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryActivity] END AS [C7], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[Notes] END AS [C8], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[RowVersion] END AS [C9], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[BirthDate] END AS [C10], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[HeightInches] END AS [C11], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[WeightPounds] END AS [C12], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[DietaryRestrictions] END AS [C13] FROM [dbo].[Contact] AS [Extent1] LEFT OUTER JOIN (SELECT [Extent2].[ContactID] AS [ContactID], [Extent2].[BirthDate] AS [BirthDate], [Extent2].[HeightInches] AS [HeightInches], [Extent2].[WeightPounds] AS [WeightPounds], [Extent2].[DietaryRestrictions] AS [DietaryRestrictions], [Extent3].[CustomerTypeID] AS [CustomerTypeID], [Extent3].[InitialDate] AS [InitialDate], [Extent3].[PrimaryDesintation] AS [PrimaryDesintation], [Extent3].[SecondaryDestination] AS [SecondaryDestination], [Extent3].[PrimaryActivity] AS [PrimaryActivity], [Extent3].[SecondaryActivity] AS [SecondaryActivity], [Extent3].[Notes] AS [Notes], [Extent3].[RowVersion] AS [RowVersion], cast(1 as bit) AS [C1] FROM [dbo].[ContactPersonalInfo] AS [Extent2] INNER JOIN [dbo].[Customers] AS [Extent3] ON [Extent2].[ContactID] = [Extent3].[ContactID]) AS [Project1] ON [Extent1].[ContactID] = [Project1].[ContactID] LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll3].[C1] AS [C1] FROM (SELECT [UnionAll2].[C1] AS [C1] FROM (SELECT [UnionAll1].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable1] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable2]) AS [UnionAll1] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable3]) AS [UnionAll2] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable4]) AS [UnionAll3] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable5]) AS [c]) AS [Limit1] ON 1 = 1 LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll7].[C1] AS [C1] FROM (SELECT [UnionAll6].[C1] AS [C1] FROM (SELECT [UnionAll5].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable6] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable7]) AS [UnionAll5] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable8]) AS [UnionAll6] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable9]) AS [UnionAll7] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable10]) AS [c]) AS [Limit2] ON 1 = 1 CROSS JOIN (SELECT MAX([UnionAll12].[C1]) AS [A1] FROM (SELECT [UnionAll11].[C1] AS [C1] FROM (SELECT [UnionAll10].[C1] AS [C1] FROM (SELECT [UnionAll9].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable11] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable12]) AS [UnionAll9] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable13]) AS [UnionAll10] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable14]) AS [UnionAll11] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable15]) AS [UnionAll12]) AS [GroupBy1] WHERE [Extent1].[ContactID] IN ([GroupBy1].[A1], (CASE WHEN ([Limit1].[C1] IS NULL) THEN 0 ELSE [Limit2].[C1] END)) Based on this, is it possible that Linq2Entities provider indeed doesn't execute non-Linq and Linq-to-Object methods, but instead creates equivalent SQL statements for some of them ( and for others it throws an exception )? Thank you in advance

Read the article

Windows Workflow Foundation (WF) and things I wish were more intuitive

- by pjohnson

I've started using Windows Workflow Foundation, and so far ran into a few things that aren't incredibly obvious. Microsoft did a good job of providing a ton of samples, which is handy because you need them to get anywhere with WF. The docs are thin, so I've been bouncing between samples and downloadable labs to figure out how to implement various activities in a workflow. Code separation or not? You can create a workflow and activity in Visual Studio with or without code separation, i.e. just a .cs "Component" style object with a Designer.cs file, or a .xoml XML markup file with code behind (beside?) it. Absence any obvious advantage to one or the other, I used code separation for workflows and any complex custom activities, and without code separation for custom activities that just inherit from the Activity class and thus don't have anything special in the designer. So far, so good. Workflow Activity Library project type - What's the point of this separate project type? So far I don't see much advantage to keeping your custom activities in a separate project. I prefer to have as few projects as needed (and no fewer). The Designer's Toolbox window seems to find your custom activities just fine no matter where they are, and the debugging experience doesn't seem to be any different. Designer Properties - This is about the designer, and not specific to WF, but nevertheless something that's hindered me a lot more in WF than in Windows Forms or elsewhere. The Properties window does a good job of showing you property values when you hover the mouse over the values. But they don't do the same to find out what a control's type is. So maybe if I named all my activities "x1" and "x2" instead of helpful self-documenting names like "listenForStatusUpdate", then I could easily see enough of the type to determine what it is, but any names longer than those and all I get of the type is "System.Workflow.Act" or "System.Workflow.Compone". Even hitting the dropdown doesn't expand any wider, like the debugger quick watch "smart tag" popups do when you scroll through members. The only way I've found around this in VS 2008 is to widen the Properties dialog, losing precious designer real estate, then shrink it back down when you're done to see what you were doing. Really? WF Designer - This is about the designer, and I believe is specific to WF. I should be able to edit the XML in a .xoml file, or drag and drop using the designer. With WPF (at least in VS 2010 Ultimate), these are side by side, and changes to one instantly update the other. With WF, I have to right-click on the .xoml file, choose Open With, and pick XML Editor to edit the text. It looks like this is one way where WF didn't get the same attention WPF got during .NET Fx 3.0 development. Service - In the WF world, this is simply a class that talks to the workflow about things outside the workflow, not to be confused with how the term "service" is used in every other context I've seen in the Windows and .NET world, i.e. an executable that waits for events or requests from a client and services them (Windows service, web service, WCF service, etc.). ListenActivity - Such a great concept, yet so unintuitive. It seems you need at least two branches (EventDrivenActivity instances), one for your positive condition and one for a timeout. The positive condition has a HandleExternalEventActivity, and the timeout has a DelayActivity followed by however you want to handle the delay, e.g. a ThrowActivity. The timeout is simple enough; wiring up the HandleExternalEventActivity is where things get fun. You need to create a service (see above), and an interface for that service (this seems more complex than should be necessary--why not have activities just wire to a service directly?). And you need to create a custom EventArgs class that inherits from ExternalDataEventArgs--you can't create an ExternalDataEventArgs event handler directly, even if you don't need to add any more information to the event args, despite ExternalDataEventArgs not being marked as an abstract class, nor a compiler error nor warning nor any other indication that you're doing something wrong, until you run it and find that it always times out and get to check every place mentioned here to see why. Your interface and service need an event that consumes your custom EventArgs class, and a method to fire that event. You need to call that method from somewhere. Then you get to hope that you did everything just right, or that you can step through code in the debugger before your Delay timeout expires. Yes, it's as much fun as it sounds. TransactionScopeActivity - I had the bright idea of putting one in as a placeholder, then filling in the database updates later. That caused this error: The workflow hosting environment does not have a persistence service as required by an operation on the workflow instance "[GUID]". ...which is about as helpful as "Object reference not set to an instance of an object" and even more fun to debug. Google led me to this Microsoft Forums hit, and from there I figured out it didn't like that the activity had no children. Again, a Validator on TransactionScopeActivity would have pointed this out to me at design time, rather than handing me a nearly useless error at runtime. Easily enough, I disabled the activity and that fixed it. I still see huge potential in my work where WF could make things easier and more flexible, but there are some seriously rough edges at the moment. Maybe I'm just spoiled by how much easier and more intuitive development elsewhere in the .NET Framework is.

Read the article

Write your Tests in RSpec with IronRuby

- by kazimanzurrashid

[Note: This is not a continuation of my previous post, treat it as an experiment out in the wild. ] Lets consider the following class, a fictitious Fund Transfer Service: public class FundTransferService : IFundTransferService { private readonly ICurrencyConvertionService currencyConvertionService; public FundTransferService(ICurrencyConvertionService currencyConvertionService) { this.currencyConvertionService = currencyConvertionService; } public void Transfer(Account fromAccount, Account toAccount, decimal amount) { decimal convertionRate = currencyConvertionService.GetConvertionRate(fromAccount.Currency, toAccount.Currency); decimal convertedAmount = convertionRate * amount; fromAccount.Withdraw(amount); toAccount.Deposit(convertedAmount); } } public class Account { public Account(string currency, decimal balance) { Currency = currency; Balance = balance; } public string Currency { get; private set; } public decimal Balance { get; private set; } public void Deposit(decimal amount) { Balance += amount; } public void Withdraw(decimal amount) { Balance -= amount; } } We can write the spec with MSpec + Moq like the following: public class When_fund_is_transferred { const decimal ConvertionRate = 1.029m; const decimal TransferAmount = 10.0m; const decimal InitialBalance = 100.0m; static Account fromAccount; static Account toAccount; static FundTransferService fundTransferService; Establish context = () => { fromAccount = new Account("USD", InitialBalance); toAccount = new Account("CAD", InitialBalance); var currencyConvertionService = new Moq.Mock<ICurrencyConvertionService>(); currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); fundTransferService = new FundTransferService(currencyConvertionService.Object); }; Because of = () => { fundTransferService.Transfer(fromAccount, toAccount, TransferAmount); }; It should_decrease_from_account_balance = () => { fromAccount.Balance.ShouldBeLessThan(InitialBalance); }; It should_increase_to_account_balance = () => { toAccount.Balance.ShouldBeGreaterThan(InitialBalance); }; } and if you run the spec it will give you a nice little output like the following: When fund is transferred » should decrease from account balance » should increase to account balance 2 passed, 0 failed, 0 skipped, took 1.14 seconds (MSpec). Now, lets see how we can write exact spec in RSpec. require File.dirname(__FILE__) + "/../FundTransfer/bin/Debug/FundTransfer" require "spec" require "caricature" describe "When fund is transferred" do Convertion_Rate = 1.029 Transfer_Amount = 10.0 Initial_Balance = 100.0 before(:all) do @from_account = FundTransfer::Account.new("USD", Initial_Balance) @to_account = FundTransfer::Account.new("CAD", Initial_Balance) currency_convertion_service = Caricature::Isolation.for(FundTransfer::ICurrencyConvertionService) currency_convertion_service.when_receiving(:get_convertion_rate).with(:any, :any).return(Convertion_Rate) fund_transfer_service = FundTransfer::FundTransferService.new(currency_convertion_service) fund_transfer_service.transfer(@from_account, @to_account, Transfer_Amount) end it "should decrease from account balance" do @from_account.balance.should be < Initial_Balance end it "should increase to account balance" do @to_account.balance.should be > Initial_Balance end end I think the above code is self explanatory, treat the require(line 1- 4) statements as the add reference of our visual studio projects, we are adding all the required libraries with this statement. Next, the describe which is a RSpec keyword. The before does exactly the same as NUnit's Setup or MsTest’s TestInitialize attribute, but in the above we are using before(:all) which acts as ClassInitialize of MsTest, that means it will be executed only once before all the test methods. In the before(:all) we are first instantiating the from and to accounts, it is same as creating with the full name (including namespace) like fromAccount = new FundTransfer.Account(.., ..), next, we are creating a mock object of ICurrencyConvertionService, check that for creating the mock we are not using the Moq like the MSpec version. This is somewhat an interesting issue of IronRuby or maybe the DLR, it seems that it is not possible to use the lambda expression that most of the mocking tools uses in arrange phase in Iron Ruby, like: currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); But the good news is, there is already an excellent mocking tool called Caricature written completely in IronRuby which we can use to mock the .NET classes. May be all the mocking tool providers should give some thought to add the support for the DLR, so that we can use the tool that we are already familiar with. I think the rest of the code is too simple, so I am skipping the explanation. Now, the last thing, how we are going to run it with RSpec, lets first install the required gems. Open you command prompt and type the following: igem sources -a http://gems.github.com This will add the GitHub as gem source. Next type: igem install uuidtools caricature rspec and at last we have to create a batch file so that we can execute it in the Notepad++, create a batch like in the IronRuby bin directory like my previous post and put the following in that batch file: @echo off cls call spec %1 --format specdoc pause Next, add a run menu and shortcut in the Notepad++ like my previous post. Now when we run it it will show the following output: When fund is transferred - should decrease from account balance - should increase to account balance Finished in 0.332042 seconds 2 examples, 0 failures Press any key to continue . . . You will complete code of this post in the bottom. That's it for today. Download: RSpecIntegration.zip

Read the article

How to install iodbc in Ubuntu 12.10

- by Hanynowsky

I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

Read the article

Delving into design patterns, and what that means for the Oracle user experience

- by Kathy.Miedema

By Kathy Miedema, Oracle Applications User Experience George Hackman, Senior Director, Applications User Experiences The Oracle Applications User Experience team has some exciting things happening around Fusion Applications design patterns. Because we’re hoping to have some new offerings soon (stay tuned with VoX to see what’s in the pipeline around Fusion Applications design patterns), now is a good time to talk more about what design patterns can do for the individual user as well as the entire company. George Hackman, Senior Director of Operations User Experience, says the first thing to note is that user experience is not just about the user interface. It’s about understanding how people do things, observing them, and then finding the patterns that emerge. The Applications UX team develops those patterns and then builds them into Oracle applications. What emerges, Hackman says, is a consistent, efficient user experience that promotes a productive workplace. Creating design patterns What is a design pattern in the context of enterprise software? “Every day, people use technology to get things done,” Hackman says. “They navigate a virtual world that reaches from enterprise to consumer apps, and from desktop to mobile. This virtual world is constantly under construction. New areas are being developed and old areas are being redone. As this world is being built and remodeled, efficient pathways and practices emerge. “Oracle's user experience team watches users navigate this world. We measure their productivity and ask them about their satisfaction. We take the most efficient, most productive pathways from the enterprise and consumer world and turn them into Oracle's user experience patterns.” Hackman describes the process as combining all of the best practices from every part of a user’s world. Members of the user experience team observe, analyze, design, prototype, and measure each work task to find the best possible pattern for a particular work flow. As the team builds the patterns, “we make sure they are fully buildable using Oracle technology,” Hackman said. “So customers know they can use these patterns. There’s no need to make something up from scratch, not knowing whether you can even build it.” Hackman says that creating something on a computer is a good example of a user experience pattern. “People are creating things all the time,” he says. “On the consumer side, they are creating documents. On the enterprise side, they are creating expense reports. On a mobile phone, they are creating contacts. They are using different apps like iPhone or Facebook or Gmail or Oracle software, all doing this creation process.” The Applications UX team starts their process by observing how people might create something. “We observe people creating things. We see the patterns, we analyze and document, then we apply them to our products. It might be different from phone to web browser, but we have these design patterns that create a consistent experience across platforms, and across products, too. The result for customers Oracle constantly improves its part of the virtual world, Hackman said. New products are created and existing products are upgraded. Because Oracle builds user experience design patterns, Oracle's virtual world becomes both more powerful and more familiar at the same time. Because of design patterns, users can navigate with ease as they embrace the latest technology – because it behaves the way they expect it to. This means less training and faster adoption for individual users, and more productivity for the business as a whole. Hackman said Oracle gives customers and partners access to design patterns so that they can build in the virtual world using the same best practices. Customers and partners can extend applications with a user experience that is comfortable and familiar to their users. For businesses that are integrating different Oracle applications, design patterns are key. The user experience created in E-Business Suite should be similar to the user experience in Fusion Applications, Hackman said. If a user is transitioning from one application to the other, it shouldn’t be difficult for them to do their work. With design patterns, it isn’t. “Oracle user experience patterns are the building blocks for the virtual world that ensure productivity, consistency and user satisfaction,” Hackman said. “They are built for the enterprise, but incorporate the best practices from across the virtual world. They empower productivity and facilitate social interaction. When you build with patterns, you get all the end-user benefits of less training / retraining from the finished product. You also get faster / cheaper development.” What’s coming? You can already access design patterns to help you build Dashboards with OBIEE here. And we promised you at the beginning that we had something in the pipeline on Fusion Applications design patterns. Look for the announcement about when they are available here on VoX.

Read the article

User Productivity Kit - Powerful Packages (Part 2)

- by [email protected]

In my first post on packages I described what a package is and how it can be used. I also started explaining some of the considerations that should be taken into account when determining how to arrange your packages. The first is when the files are interrelated and depend on one another such as an HTML file and it's graphics. A second consideration is how the files are used in your outlines. Let's say you're using a dozen Word doc files. You could place them all in a single package or put each Word doc file in a separate package but what's the right thing to do? There are several factors that will influence your decision. To understand the first, let me explain a function of UPK publishing. Take an outline in UPK that has an attachment (concept, frame link, or hyperlink) that points to a file in a package. When you publish this outline, the publishing engine will determine that there is a link to a file in the package and copy the contents of the package to the publishing destination directory. This is done to ensure that any interrelated files are kept together. For the situation where you have an HTML file with links to number of graphics files, this is a good thing. If, however, the package has a dozen unrelated Word doc files and you link to only one of them, all dozen Word documents will be copied to the publishing destination directory. Whether or not this is a good thing is dependent on two things. First, are all of the files in the package used in the outline that you're publishing? Take an outline that includes links to all of the Word documents in that dozen document package I described earlier. For this situation, you may choose to keep all the files in a single package for convenience. A second consideration is how your organization leverages reuse in UPK. In this context, I'm referring to the link style of reuse such as when you link to the same topic from multiple UPK outlines and changes to the topic appear in both places. Take an example where you have the earlier mentioned dozen Word document package and an outline with a dozen topics in it. Each topic has an attachment pointing to one of the Word documents in the package (frame link, concept, etc.) If you're only publishing this outline, the single package probably works fine but what if you're reusing one of these topics in another outline? As I explained earlier, linking to one file in the package will result in all files in the package being copied to your published output. In this example, linking to one topic in the first outline will result in all dozen Word documents being copied to the published output. This may result in files in the output that you don't want there for business or size reasons. This is a situation in which you should consider placing each of the Word documents in it's own separate package. With each document in it's own package, that link to a single document will result in only that single package and single Word document being copied to the published output. In my last post I had described that packages are documents in the UPK library. When using the multi-user version of the UPK Developer you can leverage standard library capabilities for managing the files in these packages during the development process - capabilities such as check in / check out, history, etc. When structuring your packages take into consideration how the authors are going to be adding, modifying and deleting files from the packages. A single package is a single document in the UPK library. Like any other document in the library, a single user can check out the package and edit it at a time. If you have a large number of files in a single package and these must be modified by many users, you need to consider whether this will cause problems as multiple users compete to update the same package. If the files don't depend on each other consider placing the files in separate packages to reduce contention. I hope you've enjoyed these two posts on how you can leverage the power of packages in your content. In summary, consider the following when structuring your packages: Is the asset a single, standalone file or a set of files that depend on each other? Will all the files always be used together in a single outline or may only some of the files be needed based on how the content is reused across multiple outlines? Will multiple developers need to update the files in a single package or should you break it into multiple packages to reduce contention when checking out the document? We'd like to hear from you on how you're using packages in your content. Please add your comments below! Thank you and I hope these two posts have given you additional insights into how to use packages in your content and structure them for efficient use. John Zaums Senior Director, Product Development Oracle User Productivity Kit

Read the article

SSAS Maestro Training in July 2012 #ssasmaestro #ssas

- by Marco Russo (SQLBI)

A few hours ago Chris Webb blogged about SSAS Maestro and I’d like to propagate the news, adding also some background info. SSAS Maestro is the premier certification on Analysis Services that selects the best experts in Analysis Services around the world. In 2011 Microsoft organized two rounds of training/exams for SSAS Maestros and up to now only 11 people from the first wave have been announced – around 10% of attendees of the course! In the next few days the new Maestros from the second round should be announced and this long process is caused by many factors that I’m going to explain. First, the course is just a step in the process. Before the course you receive a list of topics to study, including the slides of the course. During the course, students receive a lot of information that might not have been included in the slides and the best part of the course is class interaction. Students are expected to bring their experience to the table and comparing case studies, experiences and having long debates is an important part of the learning process. And it is also a part of the evaluation: good questions might be also more important than good answers! Finally, after the course, students have their homework and this may require one or two months to be completed. After that, a long (very long) evaluation process begins, taking into account homework, labs, participation… And for this reason the final evaluation may arrive months later after the course. We are going to improve and shorten this process with the next courses. The first wave of SSAS Maestro had been made by invitation only and now the program is opening, requiring a fee to participate in order to cover the cost of preparation, training and exam. The number of attendees will be limited and candidates will have to send their CV in order to be admitted to the course. Only experienced Analysis Services developers will be able to participate to this challenging program. So why you should do that? Well, only 10% of students passed the exam until now. So if you need 100% guarantee to pass the exam, you need to study a lot, before, during and after the course. But the course by itself is a precious opportunity to share experience, create networking and learn mission-critical enterprise-level best practices that it’s hard to find written on books. Oh, well, many existing white papers are a required reading *before* the course! The course is now 5 days long, and every day can be *very* long. We’ll have lectures and discussions in the morning and labs in the afternoon/evening. Plus some more lectures in one or two afternoons. A heavy part of the course is about performance optimization, capacity planning, monitoring. This edition will introduce also Tabular models, and don’t expect something you might find in the SSAS Tabular Workshop – only performance, scalability monitoring and optimization will be covered, knowing Analysis Services is a requirement just to be accepted! I and Chris Webb will be the teachers for this edition. The course is expensive. Applying for SSAS Maestro will cost around 7000€ plus taxes (reduced to 5000€ for students of a previous SSAS Maestro edition). And you will be locked in a training room for the large part of the week. So why you should do that? Well, as I said, this is a challenging course. You will not find the time to check your email – the content is just too much interesting to think you can be distracted by something else. Another good reason is that this course will take place in Italy. Well, the course will take place in the brand new Microsoft Innovation Campus, but in general we’ll be able to provide you hints to get great food and, if you are willing to attach one week-end to your trip, there are plenty of places to visit (and I’m not talking about the classic Rome-Florence-Venice) – you might really need to relax after such a week! Finally, the marking process after the course will be faster – we’d like to complete the evaluation within three months after the course, considering that 1-2 months might be required to complete the homework. If at this point you are not scared: registration will open in mid-April, but you can already write to [email protected] sending your CV/resume and a short description of your level of SSAS knowledge and experience. The selection process will start early and you may want to put your admission form on top of the FIFO queue!

Read the article

IBM "per core" comparisons for SPECjEnterprise2010

- by jhenning

I recently stumbled upon a blog entry from Roman Kharkovski (an IBM employee) comparing some SPECjEnterprise2010 results for IBM vs. Oracle. Mr. Kharkovski's blog claims that SPARC delivers half the transactions per core vs. POWER7. Prior to any argument, I should say that my predisposition is to like Mr. Kharkovski, because he says that his blog is intended to be factual; that the intent is to try to avoid marketing hype and FUD tactic; and mostly because he features a picture of himself wearing a bike helmet (me too). Therefore, in a spirit of technical argument, rather than FUD fight, there are a few areas in his comparison that should be discussed. Scaling is not free For any benchmark, if a small system scores 13k using quantity R1 of some resource, and a big system scores 57k using quantity R2 of that resource, then, sure, it's tempting to divide: is 13k/R1 > 57k/R2 ? It is tempting, but not necessarily educational. The problem is that scaling is not free. Building big systems is harder than building small systems. Scoring 13k/R1 on a little system provides no guarantee whatsoever that one can sustain that ratio when attempting to handle more than 4 times as many users. Choosing the denominator radically changes the picture When ratios are used, one can vastly manipulate appearances by the choice of denominator. In this case, lots of choices are available for the resource to be compared (R1 and R2 above). IBM chooses to put cores in the denominator. Mr. Kharkovski provides some reasons for that choice in his blog entry. And yet, it should be noted that the very concept of a core is: arbitrary: not necessarily comparable across vendors; fluid: modern chips shift chip resources in response to load; and invisible: unless you have a microscope, you can't see it. By contrast, one can actually see processor chips with the naked eye, and they are a bit easier to count. If we put chips in the denominator instead of cores, we get: 13161.07 EjOPS / 4 chips = 3290 EjOPS per chip for IBM vs 57422.17 EjOPS / 16 chips = 3588 EjOPS per chip for Oracle The choice of denominator makes all the difference in the appearance. Speaking for myself, dividing by chips just seems to make more sense, because: I can see chips and count them; and I can accurately compare the number of chips in my system to the count in some other vendor's system; and Tthe probability of being able to continue to accurately count them over the next 10 years of microprocessor development seems higher than the probability of being able to accurately and comparably count "cores". SPEC Fair use requirements Speaking as an individual, not speaking for SPEC and not speaking for my employer, I wonder whether Mr. Kharkovski's blog article, taken as a whole, meets the requirements of the SPEC Fair Use rule www.spec.org/fairuse.html section I.D.2. For example, Mr. Kharkovski's footnote (1) begins Results from http://www.spec.org as of 04/04/2013 Oracle SUN SPARC T5-8 449 EjOPS/core SPECjEnterprise2010 (Oracle's WLS best SPECjEnterprise2010 EjOPS/core result on SPARC). IBM Power730 823 EjOPS/core (World Record SPECjEnterprise2010 EJOPS/core result) The questionable tactic, from a Fair Use point of view, is that there is no such metric at the designated location. At www.spec.org, You can find the SPEC metric 57422.17 SPECjEnterprise2010 EjOPS for Oracle and You can also find the SPEC metric 13161.07 SPECjEnterprise2010 EjOPS for IBM. Despite the implication of the footnote, you will not find any mention of 449 nor anything that says 823. SPEC says that you can, under its fair use rule, derive your own values; but it emphasizes: "The context must not give the appearance that SPEC has created or endorsed the derived value." Substantiation and transparency Although SPEC disclaims responsibility for non-SPEC information (section I.E), it says that non-SPEC data and methods should be accurate, should be explained, should be substantiated. Unfortunately, it is difficult or impossible for the reader to independently verify the pricing: Were like units compared to like (e.g. list price to list price)? Were all components (hw, sw, support) included? Were all fees included? Note that when tpc.org shows IBM pricing, there are often items such as "PROCESSOR ACTIVATION" and "MEMORY ACTIVATION". Without the transparency of a detailed breakdown, the pricing claims are questionable. T5 claim for "Fastest Processor" Mr. Kharkovski several times questions Oracle's claim for fastest processor, writing You see, when you publish industry benchmarks, people may actually compare your results to other vendor's results. Well, as we performance people always say, "it depends". If you believe in performance-per-core as the primary way of looking at the world, then yes, the POWER7+ is impressive, spending its chip resources to support up to 32 threads (8 cores x 4 threads). Or, it just might be useful to consider performance-per-chip. Each SPARC T5 chip allows 128 hardware threads to be simultaneously executing (16 cores x 8 threads). The Industry Standard Benchmark that focuses specifically on processor chip performance is SPEC CPU2006. For this very well known and popular benchmark, SPARC T5: provides better performance than both POWER7 and POWER7+, for 1 chip vs. 1 chip, for 8 chip vs. 8 chip, for integer (SPECint_rate2006) and floating point (SPECfp_rate2006), for Peak tuning and for Base tuning. For example, at the 8-chip level, integer throughput (SPECint_rate2006) is: 3750 for SPARC 2170 for POWER7+. You can find the details at the March 2013 BestPerf CPU2006 page SPEC is a trademark of the Standard Performance Evaluation Corporation, www.spec.org. The two specific results quoted for SPECjEnterprise2010 are posted at the URLs linked from the discussion. Results for SPEC CPU2006 were verified at spec.org 1 July 2013, and can be rechecked here.

Read the article

EU Digital Agenda scores 85/100

- by trond-arne.undheim

If the Digital Agenda was a bottle of wine and I were wine critic Robert Parker, I would say the Digital Agenda has "a great bouquet, many good elements, with astringent, dry and puckering mouth feel that will not please everyone, but still displaying some finesse. A somewhat controlled effort with no surprises and a few noticeable flaws in the delivery. Noticeably shorter aftertaste than advertised by the producers. Score: 85/100. Enjoy now". The EU Digital Agenda states that "standards are vital for interoperability" and has a whole chapter on interoperability and standards. With this strong emphasis, there is hope the EU's outdated standardization system finally is headed for reform. It has been 23 years since the legal framework of standardisation was completed by Council Decision 87/95/EEC8 in the Information and Communications Technology (ICT) sector. Standardization is market driven. For several decades the IT industry has been developing standards and specifications in global open standards development organisations (fora/consortia), many of which have transparency procedures and practices far superior to the European Standards Organizations. The Digital Agenda rightly states: "reflecting the rise and growing importance of ICT standards developed by certain global fora and consortia". Some fora/consortia, of course, are distorted, influenced by single vendors, have poor track record, and need constant vigilance, but they are the minority. Therefore, the recognition needs to be accompanied by eligibility criteria focused on openness. Will the EU reform its ICT standardization by the end of 2010? Possibly, and only if DG Enterprise takes on board that Information and Communications Technologies (ICTs) have driven half of the productivity growth in Europe over the past 15 years, a prominent fact in the EU's excellent Digital Competitiveness report 2010 published on Monday 17 May. It is ok to single out the ICT sector. It simply is the most important sector right now as it fuels growth in all other sectors. Let's not wait for the entire standardization package which may take another few years. Europe does not have time. The Digital Agenda is an umbrella strategy with deliveries from a host of actors across the Commission. For instance, the EU promises to issue "guidance on transparent ex-ante disclosure rules for essential intellectual property rights and licensing terms and conditions in the context of standard setting", by 2011 in the Horisontal Guidelines now out for public consultation by DG COMP and to some extent by DG ENTR's standardization policy reform. This is important. The EU will issue procurement guidance as interoperability frameworks are put into practice. This is a joint responsibility of several DGs, and is likely to suffer coordination problems, controversy and delays. We have seen plenty of the latter already and I have commented on the Commission's own interoperability elsewhere, with mixed luck. :( Yesterday, I watched the cartoonesque Korean western film The Good, the Bad and the Weird. In the movie (and I meant in the movie only), a bandit, a thief, and a bounty hunter, all excellent at whatever they do, fight for a treasure map. Whether that is a good analogy for the situation within the Commission, others are better judges of than I. However, as a movie fanatic, I still await the final shoot-out, and, as in the film, the only certainty is that "life is about chasing and being chased". The missed opportunity (in this case not following up the push from Member States to better define open standards based interoperability) is a casualty of the chaos ensued in the European Wild West (and I mean that in the most endearing sense, and my excuses beforehand to actors who possibly justifiably cannot bear being compared to fictional movie characters). Instead of exposing the ongoing fight, the EU opted for the legalistic use of the term "standards" throughout the document. This is a term that--to the EU-- excludes most standards used by the IT industry world wide. So, while it, for a moment, meant "weapon down", it will not lead to lasting peace. The Digital Agenda calls for the Member States to "Implement commitments on interoperability and standards in the Malmö and Granada Declarations by 2013". This is a far cry from the actual Ministerial Declarations which called upon the Commission to help them with this implementation by recognizing and further defining open standards based interoperability. Unless there is more forthcoming from the Commission, the market's judgement will be: you simply fall short. Generally, I think the EU focus now should be "from policy to practice" and the Digital Agenda does indeed stop short of tackling some highly practical issues. There is need for progress beyond the Digital Agenda. Here are some suggestions that would help Europe re-take global leadership on openness, public sector reform, and economic growth: A strong European software strategy centred around open standards based interoperability by 2011. An ambitious new eCommission strategy for 2011-15 focused on migration to open standards by 2015. Aligning the IT portfolio across the Commission into one Digital Agenda DG by 2012. Focusing all best practice exchange in eGovernment on one social networking site, epractice.eu (full disclosure: I had a role in getting that site up and running) Prioritizing public sector needs in global standardization over European standardization by 2014.

Read the article

I have a problem with a AE1200 Cisco/Linksys Wireless-N USB adapter having stopped working after I ran the update manager in Ubuntu 12.04

- by user69670

Here is the problem, I use a Cisco/Linksys AE1200 wireless network adapter to connect my desktop to a public wifi internet connection. I use ndiswrapper to use the windows driver and it had been working fine for me untill I ran the update manager overnight a few days ago. When I woke up it was asking for the normal computer restart to implement the changes but after rebooting the computer, the wireless adapter did not work, the status light on the adapter did not light up even though ubuntu recognizes it is there and according to ndiswrapper the drivers are loaded and the hardware is present. the grep command is being a bitch for some unknown reason today so this will be long sorry Output from "lspci": 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge (rev 01) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RC410 [Radeon Xpress 200] 02:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem 02:03.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Output from "lsusb": Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 13b1:0039 Linksys AE1200 802.11bgn Wireless Adapter [Broadcom BCM43235] Bus 003 Device 002: ID 045e:0053 Microsoft Corp. Optical Mouse Bus 004 Device 002: ID 1043:8006 iCreate Technologies Corp. Flash Disk 32-256 MB Output from "ifconfig": eth0 Link encap:Ethernet HWaddr 00:19:21:b6:af:7c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0xb400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13232 errors:0 dropped:0 overruns:0 frame:0 TX packets:13232 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1084624 (1.0 MB) TX bytes:1084624 (1.0 MB) Output from "iwconfig": lo no wireless extensions. eth0 no wireless extensions. Output from "lsmod": Module Size Used by nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat uas 17828 0 usb_storage 39646 1 nls_utf8 12493 1 udf 84366 1 crc_itu_t 12627 1 udf snd_ca0106 39279 2 snd_ac97_codec 106082 1 snd_ca0106 ac97_bus 12642 1 snd_ac97_codec snd_pcm 80845 2 snd_ca0106,snd_ac97_codec rfcomm 38139 0 snd_seq_midi 13132 0 snd_rawmidi 25424 2 snd_ca0106,snd_seq_midi bnep 17830 2 parport_pc 32114 0 bluetooth 158438 10 rfcomm,bnep ppdev 12849 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd 62064 11 snd_ca0106, snd_ac97_codec,snd_pcm,snd_rawj9fe snd_ca0106,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_ca0106,snd_pcm sp5100_tco 13495 0 i2c_piix4 13093 0 radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon mac_hid 13077 0 shpchp 32325 0 ati_agp 13242 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid 8139too 23283 0 8139cp 26759 0 pata_atiixp 12999 1 Output from "sudo lshw -C network": *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 5 bus info: pci@0000:02:05.0 logical name: eth0 version: 10 serial: 00:19:21:b6:af:7c size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 10 0bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:20 ioport:b400(size=256) memory:ff5fdc00-ff5fdcff Output from "iwlist scan": lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. Output from "lsb_release -d": Ubuntu 12.04 LTS Output from "uname -mr": 3.2.0-24-generic-pae i686 Output from "sudo /etc/init.d/networking restart": * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... [ OK ]

Read the article

5 minutes WIF: Make your ASP.NET application use test-STS

- by DigiMortal

Windows Identity Foundation (WIF) provides us with simple and dummy STS application we can use to develop our system with no actual STS in place. In this posting I will show you how to add STS support to your existing application and how to generate dummy application that plays you real STS. Word of caution! Although it is relatively easy to build your own STS using WIF tools I don’t recommend you to build it. Identity providers must be highly secure and stable in every means and this makes development of your own STS very complex task. If it is possible then use some known STS solution. I suppose you have WIF and WIF SDK installed on your development machine. If you don’t then here are the links to download pages: Windows Identity Foundation Windows Identity Foundation SDK Adding STS support to your web application Suppose you have web application and you want to externalize authentication so your application is able to detect users, send unauthenticated users to login and work in other terms exactly like it worked before. WIF tools provide you with all you need. 1. Click on your web application project and select “Add STS reference…” from context menu to start adding or updating STS settings for web application. 2. Insert your application URI in application settings window. Note that web.config file is already selected for you. I inserted URI that corresponds to my web application address under IIS Express. This URI must exist (later) because otherwise you cannot use dummy STS service. 3. Select “Create a new STS project in the current solution” and click Next button. 4. Summary screen gives you information about how your site will use STS. You can run this wizard always when you have to modify STS parameters. Click Finish. If everything goes like expected then new web site will be added to your solution and it is named as YourWebAppName_STS. Dummy STS application Image on right shows you dummy STS web site. Yes, it is created as web site project not as web application. But it still works nice and you don’t have to make there any modifications. It just works but it is dummy one. Why dummy STS? Some points about dummy STS web site: Dummy STS is not template for your own custom STS identity provider. Dummy STS is very good and simple replacement of real STS so you have more flexible development environment and you don’t have to authenticate yourself in real service. Of course, you can modify dummy STS web site to mimic some behavior of your real STS. Pages in dummy STS Dummy STS has two pages – Login.aspx and Default.aspx. Default.aspx is the page that handles requests to STS service. Login.aspx is the page where authentication takes place. Dummy STS authenticates users using FBA. You can insert whatever username you like and dummy STS still works. You can take a look at the code behind these pages to get some idea about how this dummy service is built up. But again – this service is there to simplify your life as developer. Authenticating users using dummy STS If you are using development web server that ships with Visual Studio 2010 I suggest you to switch over to IIS or IIS Express and make some more configuration changes as described in my previous posting Making WIF local STS to work with your ASP.NET application. When you are done with these little modifications you are ready to run your application and see how authentication works. If everything is okay then you are redirected to dummy STS login page when running your web application. Adam Carter is provided as username by default. If you click on submit button you are authenticated and redirected to application page. In my case it looks like this. Conclusion As you saw it is very easy to set up your own dummy STS web site for testing purposes. You coded nothing. You just ran wizard, inserted some data, modified configuration a little bit and you were done. Later, when your application goes to production you can run again this STS configuration utility and it generates correct settings for your real STS service automatically.

Read the article

Creating Property Set Expression Trees In A Developer Friendly Way

- by Paulo Morgado

In a previous post I showed how to create expression trees to set properties on an object. The way I did it was not very developer friendly. It involved explicitly creating the necessary expressions because the compiler won’t generate expression trees with property or field set expressions. Recently someone contacted me the help develop some kind of command pattern framework that used developer friendly lambdas to generate property set expression trees. Simply putting, given this entity class: public class Person { public string Name { get; set; } } The person in question wanted to write code like this: var et = Set((Person p) => p.Name = "me"); Where et is the expression tree that represents the property assignment. So, if we can’t do this, let’s try the next best thing that is splitting retrieving the property information from the retrieving the value to assign o the property: var et = Set((Person p) => p.Name, () => "me"); And this is something that the compiler can handle. The implementation of Set receives an expression to retrieve the property information from and another expression the retrieve the value to assign to the property: public static Expression<Action<TEntity>> Set<TEntity, TValue>( Expression<Func<TEntity, TValue>> propertyGetExpression, Expression<Func<TValue>> valueExpression) The implementation of this method gets the property information form the body of the property get expression (propertyGetExpression) and the value expression (valueExpression) to build an assign expression and builds a lambda expression using the same parameter of the property get expression as its parameter: public static Expression<Action<TEntity>> Set<TEntity, TValue>( Expression<Func<TEntity, TValue>> propertyGetExpression, Expression<Func<TValue>> valueExpression) { var entityParameterExpression = (ParameterExpression)(((MemberExpression)(propertyGetExpression.Body)).Expression); return Expression.Lambda<Action<TEntity>>( Expression.Assign(propertyGetExpression.Body, valueExpression.Body), entityParameterExpression); } And now we can use the expression to translate to another context or just compile and use it: var et = Set((Person p) => p.Name, () => name); Console.WriteLine(person.Name); // Prints: p => (p.Name = “me”) var d = et.Compile(); d(person); Console.WriteLine(person.Name); // Prints: me It can even support closures: var et = Set((Person p) => p.Name, () => name); Console.WriteLine(person.Name); // Prints: p => (p.Name = value(<>c__DisplayClass0).name) var d = et.Compile(); name = "me"; d(person); Console.WriteLine(person.Name); // Prints: me name = "you"; d(person); Console.WriteLine(person.Name); // Prints: you Not so useful in the intended scenario (but still possible) is building an expression tree that receives the value to assign to the property as a parameter: public static Expression<Action<TEntity, TValue>> Set<TEntity, TValue>(Expression<Func<TEntity, TValue>> propertyGetExpression) { var entityParameterExpression = (ParameterExpression)(((MemberExpression)(propertyGetExpression.Body)).Expression); var valueParameterExpression = Expression.Parameter(typeof(TValue)); return Expression.Lambda<Action<TEntity, TValue>>( Expression.Assign(propertyGetExpression.Body, valueParameterExpression), entityParameterExpression, valueParameterExpression); } This new expression can be used like this: var et = Set((Person p) => p.Name); Console.WriteLine(person.Name); // Prints: (p, Param_0) => (p.Name = Param_0) var d = et.Compile(); d(person, "me"); Console.WriteLine(person.Name); // Prints: me d(person, "you"); Console.WriteLine(person.Name); // Prints: you The only caveat is that we need to be able to write code to read the property in order to write to it.

Read the article

Why would GLCapabilities.setHardwareAccelerated(true/false) have no effect on performance?

- by Luke

I've got a JOGL application in which I am rendering 1 million textures (all the same texture) and 1 million lines between those textures. Basically it's a ball-and-stick graph. I am storing the vertices in a vertex array on the card and referencing them via index arrays, which are also stored on the card. Each pass through the draw loop I am basically doing this: gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_POINTS, <size>, GL.GL_UNSIGNED_INT, 0); gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_LINES, <size>, GL.GL_UNSIGNED_INT, 0); I noticed that the JOGL library is pegging one of my CPU cores. Every frame, the run method internal to the library is taking quite long. I'm not sure why this is happening since I have called setHardwareAccelerated(true) on the GLCapabilities used to create my canvas. What's more interesting is that I changed it to setHardwareAccelerated(false) and there was no impact on the performance at all. Is it possible that my code is not using hardware rendering even when it is set to true? Is there any way to check? EDIT: As suggested, I have tested breaking my calls up into smaller chunks. I have tried using glDrawRangeElements and respecting the limits that it requests. All of these simply resulted in the same pegged CPU usage and worse framerates. I have also narrowed the problem down to a simpler example where I just render 4 million textures (no lines). The draw loop then just doing this: gl.glEnableClientState(GL.GL_VERTEX_ARRAY); gl.glEnableClientState(GL.GL_INDEX_ARRAY); gl.glClear(GL.GL_COLOR_BUFFER_BIT | GL.GL_DEPTH_BUFFER_BIT); gl.glMatrixMode(GL.GL_MODELVIEW); gl.glLoadIdentity(); <... Camera and transform related code ...> gl.glEnableVertexAttribArray(0); gl.glEnable(GL.GL_TEXTURE_2D); gl.glAlphaFunc(GL.GL_GREATER, ALPHA_TEST_LIMIT); gl.glEnable(GL.GL_ALPHA_TEST); <... Bind texture ...> gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_POINTS, <size>, GL.GL_UNSIGNED_INT, 0); gl.glDisable(GL.GL_TEXTURE_2D); gl.glDisable(GL.GL_ALPHA_TEST); gl.glDisableVertexAttribArray(0); gl.glFlush(); Where the first buffer contains 12 million floats (the x,y,z coords of the 4 million textures) and the second (element) buffer contains 4 million integers. In this simple example it is simply the integers 0 through 3999999. I really want to know what is being done in software that is pegging my CPU, and how I can make it stop (if I can). My buffers are generated by the following code: gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBufferData(GL.GL_ARRAY_BUFFER, <size> * BufferUtil.SIZEOF_FLOAT, <buffer>, GL.GL_STATIC_DRAW); gl.glVertexAttribPointer(0, 3, GL.GL_FLOAT, false, 0, 0); and: gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glBufferData(GL.GL_ELEMENT_ARRAY_BUFFER, <size> * BufferUtil.SIZEOF_INT, <buffer>, GL.GL_STATIC_DRAW); ADDITIONAL INFO: Here is my initialization code: gl.setSwapInterval(1); //Also tried 0 gl.glShadeModel(GL.GL_SMOOTH); gl.glClearDepth(1.0f); gl.glEnable(GL.GL_DEPTH_TEST); gl.glDepthFunc(GL.GL_LESS); gl.glHint(GL.GL_PERSPECTIVE_CORRECTION_HINT, GL.GL_FASTEST); gl.glPointParameterfv(GL.GL_POINT_DISTANCE_ATTENUATION, POINT_DISTANCE_ATTENUATION, 0); gl.glPointParameterfv(GL.GL_POINT_SIZE_MIN, MIN_POINT_SIZE, 0); gl.glPointParameterfv(GL.GL_POINT_SIZE_MAX, MAX_POINT_SIZE, 0); gl.glPointSize(POINT_SIZE); gl.glTexEnvf(GL.GL_POINT_SPRITE, GL.GL_COORD_REPLACE, GL.GL_TRUE); gl.glEnable(GL.GL_POINT_SPRITE); gl.glClearColor(clearColor.getX(), clearColor.getY(), clearColor.getZ(), 0.0f); Also, I'm not sure if this helps or not, but when I drag the entire graph off the screen, the FPS shoots back up and the CPU usage falls to 0%. This seems obvious and intuitive to me, but I thought that might give a hint to someone else.

Read the article

Trigger Happy

- by Tim Dexter

Its been a while, I know, we’ll say no more OK? I’ll just write …In the latest BIP 11.1.1.6 release and if I’m really honest; the release before this (we'll call it dot 5 for brevity.) The boys and gals in the engine room have been real busy enhancing BIP with some new functionality. Those of you that use the scheduling engine in OBIEE may already know and use the ‘conditional scheduling’ feature. This allows you to be more intelligent about what reports get run and sent to folks on a scheduled basis. You create a ‘trigger’ analysis (answer) that is executed at schedule time prior to the main report. When the schedule rolls around, the trigger is run, if it returns rows, then the main report is run and delivered. If there are no rows returned, then the main report is not run. Useful right? Your users are not bombarded with 20 reports in their inbox every week that they need to wade throu. They get a handful that they know they need to look at. If you ensure you use conditional formatting in the report then they can find the anomalous data in the reports very quickly and move on to the rest of their day more quickly. You could even think of OBIEE as a virtual team member, scouring the data on your behalf 24/7 and letting you know when its found an issue.BI Publisher, wanting the team t-shirt and the khaki pants, has followed suit. You can now set up ‘triggers’ for it to execute before it runs the main report. Just like its big brother, if the scheduled report trigger returns rows of data; it then executes the main report. Otherwise, the report is skipped until the next schedule time rolls around. Sound familiar?BIP differs a little, in that you only need to construct a query to act as the trigger rather than a complete report. Let assume we have a monthly wage by department report on a schedule. We only want to send the report to managers if their departmental wages reach and/or exceed a certain amount. The toughest part about this is coming up with the SQL to test the business rule you want to implement. For my example, its not that tough: select d.department_name, sum(e.salary) as wage_total from employees e, departments d where d.department_id = e.department_id group by d.department_name having sum(e.salary) > 230000 We're looking for departments where the wage cost is greater than 230,000 Dexter Dollars! With a bit of messing I found out you can parametrize the query. Users can then set a value at schedule time if they need to. To create the trigger is straightforward enough. You can create multiple triggers for users to select at schedule time. Notice I also used a parameter in the query, :wamount. Note the matching parameter in the tree on the left. You also dont need to return multiple columns, one is fine, the key is if there are rows returned. You can build the rest of your report as usual. At scheduling time the Schedule tab has a bit more on it. If your users want to set the trigger, they check the Use Trigger box. The page will then pop fields to pick the appropriate trigger they want to use, even a trigger on another data model if needed. Note it will also ask for the parameter value associated with the trigger. At this point you should note that the data model does not make a distinction between trigger and data model (extract) parameters. So users will see the parameters on the General and Schedule tabs. If per chance you do need to just have a trigger parameters. You can just hide them from the report using the Parameters popup in the report designer, just un-check the 'Show' box I have tested the opposite case where you do not want main report parameters seen in the trigger section. BIP handles that for you! Once the report hits its allotted schedule time, the trigger is executed. Based on the results the report will either run or be 'skipped.' Now, you have a smarter scheduler that will only deliver reports when folks need to see them and take action on the contents. More official info here for developers and here for users.

Read the article

Why is my Ubuntu system not using the correct kernel?

- by Brooks Moses

We're having a bit of confusion on a Ubuntu remote system -- /boot/grub/menu.lst suggests the system should boot into kernel 2.6.35-30-generic, but it is actually running kernel 2.6.32-27-generic. Where should I look to start figuring out why this is happening and how to fix it? Specifically, /boot/grub/menu.lst has default 0 and the first entry is title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2- ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic Further, I've confirmed that /boot/vmlinuz-2.6.35-30-generic and /boot/initrd.img-2.6.35-30-generic exist and have appropriate permissions. Meanwhile, uname -a returns: $ uname -a Linux cuda2 2.6.32-27-generic #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010 x86_64 GNU/Linux Edit: I've also tried re-running update-grub, and rebooting; no luck. Here's the full menu.lst, as requested by a commenter: # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro ## default grub root device ## e.g. groot=(hd0,0) # groot=67717ee3-cbf9-45d2-ae97-820256f4c4fd ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.35-30-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.32-32-server uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-32-server (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-27-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-27-generic title Ubuntu 10.10, kernel 2.6.32-27-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-27-generic title Chainload into GRUB 2 root 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST To add complication and joy to my life, this is a desktop machine in a remote datacenter; we don't have either local access or serial-console access. Suggestions?

Read the article

Adventures in Windows 8: Understanding and debugging design time data in Expression Blend

- by Laurent Bugnion

One of my favorite features in Expression Blend is the ability to attach a Visual Studio debugger to Blend. First let’s start by answering the question: why exactly do you want to do that? Note: If you are familiar with the creation and usage of design time data, feel free to scroll down to the paragraph titled “When design time data fails”. Creating design time data for your app When a designer works on an app, he needs to see something to design. For “static” UI such as buttons, backgrounds, etc, the user interface elements are going to show up in Blend just fine. If however the data is fetched dynamically from a service (web, database, etc) or created dynamically, most probably Blend is going to show just an empty element. The classical way to design at that stage is to run the application, navigate to the screen that is under construction (which can involve delays, need to log in, etc…), to measure what is on the screen (colors, margins, width and height, etc) using various tools, going back to Blend, editing the properties of the elements, running again, etc. Obviously this is not ideal. The solution is to create design time data. For more information about the creation of design time data by mocking services, you can refer to two talks of mine “Deep dive MVVM” and “MVVM Applied From Silverlight to Windows Phone to Windows 8”. The source code for these talks is here and here. Design time data in MVVM Light One of the main reasons why I developed MVVM Light is to facilitate the creation of design time data. To illustrate this, let’s create a new MVVM Light application in Visual Studio. Install MVVM Light from here: http://mvvmlight.codeplex.com (use the MSI in the Download section). After installing, make sure to read the Readme that opens up in your favorite browser, you will need one more step to install the Project Templates. Start Visual Studio 2012. Create a new MvvmLight (Win8) app. Run the application. You will see a string showing “Welcome to MVVM Light”. In the Solution explorer, right click on MainPage.xaml and select Open in Blend. Now you should see “Welcome to MVVM Light [Design]” What happens here is that Expression Blend runs different code at design time than the application runs at runtime. To do this, we use design-time detection (as explained in a previous article) and use that information to initialize a different data service at design time. To understand this better, open the ViewModelLocator.cs file in the ViewModel folder and see how the DesignDataService is used at design time, while the DataService is used at runtime. In a real-life applicationm, DataService would be used to connect to a web service, for instance. When design time data fails Sometimes however, the creation of design time data fails. It can be very difficult to understand exactly what is happening. Expression Blend is not giving a lot of information about what happened. Thankfully, we can use a trick: Attaching a debugger to Expression Blend and debug the design time code. In WPF and Silverlight (including Windows Phone 7), you could simply attach the debugger to Blend.exe (using the “Managed (v4.5, v4.0) code” option even for Silverlight!!) In Windows 8 however, things are just a bit different. This is because the designer that renders the actual representation of the Windows 8 app runs in its own process. Let’s illustrate that: Open the file DesignDataService in the Design folder. Modify the GetData method to look like this: public void GetData(Action<DataItem, Exception> callback) { throw new Exception(); // Use this to create design time data var item = new DataItem("Welcome to MVVM Light [design]"); callback(item, null); } Go to Blend and build the application. The build succeeds, but now the page is empty. The creation of the design time data failed, but we don’t get a warning message. We need to investigate what’s wrong. Close MainPage.xaml Go to Visual Studio and select the menu Debug, Attach to Process. Update: Make sure that you select “Managed (v4.5, v4.0) code” in the “Attach to” field. Find the process named XDesProc.exe. You should have at least two, one for the Visual Studio 2012 designer surface, and one for Expression Blend. Unfortunately in this screen it is not obvious which is which. Let’s find out in the Task Manager. Press Ctrl-Alt-Del and select Task Manager Go to the Details tab and sort the processes by name. Find the one that says “Blend for Microsoft Visual Studio 2012 XAML UI Designer” and write down the process ID. Go back to the Attach to Process dialog in Visual Studio. sort the processes by ID and attach the debugger to the correct instance of XDesProc.exe. Open the MainViewModel (in the ViewModel folder) Place a breakpoint on the first line of the MainViewModel constructor. Go to Blend and open the MainPage.xaml again. At this point, the debugger breaks in Visual Studio and you can execute your code step by step. Simply step inside the dataservice call, and find the exception that you had placed there. Visual Studio gives you additional information which helps you to solve the issue. More info and Conclusion I want to thank the amazing people on the Expression Blend team for being very fast in guiding me in that matter and encouraging me to blog about it. More information about the XDesProc.exe process can be found here. I had to work on a Windows 8 app for a few days without design time data because of an Exception thrown somewhere in the code, and it was really painful. With the debugger, finding the issue was a simple matter of stepping into the code until it threw the exception. Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

Read the article

Blog Buzz - Devoxx 2011

- by Janice J. Heiss

Some day I will make it to Devoxx – for now, I’m content to vicariously follow the blogs of attendees and pick up on what’s happening. I’ve been doing more blog "fishing," looking for the best commentary on 2011 Devoxx. There’s plenty of food for thought – and the ideas are not half-baked.The bloggers are out in full, offering useful summaries and commentary on Devoxx goings-on.Constantin Partac, a Java developer and a member of Transylvania JUG, a community from Cluj-Napoca/Romania, offers an excellent summary of the Devoxx keynotes. Here’s a sample:“Oracle Opening Keynote and JDK 7, 8, and 9 Presentation• Oracle is committed to Java and wants to provide support for it on any device.• JSE 7 for Mac will be released next week.• Oracle would like Java developers to be involved in JCP, to adopt a JSR and to attend local JUG meetings.• JEE 7 will be released next year.• JEE 7 is focused on cloud integration, some of the features are already implemented in glassfish 4 development branch.• JSE 8 will be release in summer of 2013 due to “enterprise community request” as they can not keep the pace with an 18 month release cycle.• The main features included in JSE8 are lambda support, project Jigsaw, new Date/Time API, project Coin++ and adding support for sensors. JSE 9 probably will focus on some of these features:1. self tuning JVM2. improved native language integration3. processing enhancement for big data4. reification (adding runtime class type info for generic types)5. unification of primitive and corresponding object classes6. meta-object protocol in order to use type and methods define in other JVM languages7. multi-tenancy8. JVM resource management” Thanks Constantin! Ivan St. Ivanov, of SAP Labs Bulgaria, also commented on the keynotes with a different focus. He summarizes Henrik Stahl’s look ahead to Java SE 8 and JavaFX 3.0; Cameron Purdy on Java EE and the cloud; celebrated Java Champion Josh Bloch on what’s good and bad about Java; Mark Reinhold’s quick look ahead to Java SE 9; and Brian Goetz on lambdas and default methods in Java SE 8. Here’s St. Ivanov’s account of Josh Bloch’s comments on the pluses of Java:“He started with the virtues of the platform. To name a few: Tightly specified language primitives and evaluation order – int is always 32 bits and operations are executed always from left to right, without compilers messing around Dynamic linking – when you change a class, you need to recompile and rebuild just the jar that has it and not the whole application Syntax similarity with C/C++ – most existing developers at that time felt like at home Object orientations – it was cool at that time as well as functional programming is today It was statically typed language – helps in faster runtime, better IDE support, etc. No operator overloading – well, I’m not sure why it is good. Scala has it for example and that’s why it is far better for defining DSLs. But I will not argue with Josh.”It’s worth checking out St. Ivanov’s summary of Bloch’s views on what’s not so great about Java as well. What's Coming in JAX-RS 2.0Marek Potociar, Principal Software Engineer at Oracle and currently specification lead of Java EE RESTful web services API (JAX-RS), blogged on his talk about what's coming in JAX-RS 2.0, scheduled for final release in mid-2012. Here’s a taste:“Perhaps the most wanted addition to the JAX-RS is the Client API, that would complete the JAX-RS story, that is currently server-side only. In JAX-RS 2.0 we are adding a completely interface-based and fluent client API that blends nicely in with the existing fluent response builder pattern on the server-side. When we started with the client API, the first proposal contained around 30 classes. Thanks to the feedback from our Expert Group we managed to reduce the number of API classes to 14 (2 of them being exceptions)! The resulting is compact while at the same time we still managed to create an API that reflects the method invocation context flow (e.g. once you decide on the target URI and start setting headers on the request, your IDE will not try to offer you a URI setter in the code completion). This is a subtle but very important usability aspect of an API…” Obviously, Devoxx is a great Java conference, one that is hitting this year at a time when much is brewing in the platform and beginning to be anticipated.

Read the article

LIMBO fails on startup with Internal errors - invalid parameters received

- by user61262

I installed LIMBO from the Humble Bundle V and as far as I am aware, this has wine packaged with it (I also installed the latest from the repo's in case is was because of that). However the game doesn't even start and fails with the message: Wine Program Error Internal errors - invalid parameters received. Is there a way to log the error or does anyone know why this happens? This question was asked previously but it seems to have disappeared. My Graphics cards is a Geforece GT 250 Cheers ice. [edit: Wine outputs the following error: wine /opt/limbo/support/limbo/drive_c/Program\ Files/limbo/limbo.exe fixme:system:SystemParametersInfoW Unimplemented action: 59 (SPI_SETSTICKYKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 53 (SPI_SETTOGGLEKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 51 (SPI_SETFILTERKEYS) fixme:win:EnumDisplayDevicesW ((null),0,0x32f580,0x00000000), stub! err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 1920x1080x32 @60! (XRandR) err:xrandr:X11DRV_XRandR_SetCurrentMode Resolution change not successful -- perhaps display has changed? wine: Unhandled page fault on read access to 0x00000000 at address 0x48213e (thread 0009), starting debugger... The debugger has the following output: Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x0048213e). Register dump: CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b EIP:0048213e ESP:0032f9f4 EBP:0037cdd0 EFLAGS:00010202( R- -- I - - - ) EAX:00000000 EBX:00000000 ECX:00000000 EDX:0037cf4c ESI:0037cda8 EDI:0037cdcc Stack dump: 0x0032f9f4: 0037cda8 0034c708 7bc35120 00000000 0x0032fa04: 0037cda8 0032fa38 0079fc58 00000000 0x0032fa14: 0048b7d4 00000001 0037cdcc 00000001 0x0032fa24: 00000780 00000438 0034c620 00000000 0x0032fa34: 0034c708 0032fa78 007a04e2 00000002 0x0032fa44: 0048c4bc 00000780 00000438 0037cda8 Backtrace: =>0 0x0048213e in limbo (+0x8213e) (0x0037cdd0) 0x0048213e: movl 0x0(%eax),%edx Modules: Module Address Debug info Name (103 modules) PE 400000- 926000 Export limbo PE 10000000-101ff000 Deferred d3dx9_43 ELF 79bb3000-7b800000 Deferred libnvidia-glcore.so.295.53 ELF 7b800000-7ba15000 Deferred kernel32<elf> \-PE 7b810000-7ba15000 \ kernel32 ELF 7bc00000-7bcc3000 Deferred ntdll<elf> \-PE 7bc10000-7bcc3000 \ ntdll ELF 7bf00000-7bf04000 Deferred <wine-loader> ELF 7d7e0000-7d7e4000 Deferred libnvidia-tls.so.295.53 ELF 7d7e4000-7d8bc000 Deferred libgl.so.1 ELF 7d9d0000-7d9d9000 Deferred librt.so.1 ELF 7d9d9000-7d9de000 Deferred libgpg-error.so.0 ELF 7d9de000-7d9f6000 Deferred libresolv.so.2 ELF 7d9f6000-7d9fa000 Deferred libkeyutils.so.1 ELF 7d9fa000-7da43000 Deferred libdbus-1.so.3 ELF 7da43000-7da55000 Deferred libp11-kit.so.0 ELF 7da55000-7dada000 Deferred libgcrypt.so.11 ELF 7dada000-7daec000 Deferred libtasn1.so.3 ELF 7daec000-7daf5000 Deferred libkrb5support.so.0 ELF 7daf5000-7dafa000 Deferred libcom_err.so.2 ELF 7dafa000-7db22000 Deferred libk5crypto.so.3 ELF 7db22000-7dbf1000 Deferred libkrb5.so.3 ELF 7dbf1000-7dc03000 Deferred libavahi-client.so.3 ELF 7dc03000-7dc11000 Deferred libavahi-common.so.3 ELF 7dc11000-7dcd5000 Deferred libgnutls.so.26 ELF 7dcd5000-7dd13000 Deferred libgssapi_krb5.so.2 ELF 7dd13000-7dd66000 Deferred libcups.so.2 ELF 7dd94000-7ddc8000 Deferred uxtheme<elf> \-PE 7dda0000-7ddc8000 \ uxtheme ELF 7ddc8000-7ddd3000 Deferred libxcursor.so.1 ELF 7ddd4000-7dde7000 Deferred gnome-keyring-pkcs11.so ELF 7de47000-7de4d000 Deferred libxfixes.so.3 ELF 7deac000-7ded6000 Deferred libexpat.so.1 ELF 7ded6000-7df0a000 Deferred libfontconfig.so.1 ELF 7df0a000-7df1a000 Deferred libxi.so.6 ELF 7df1a000-7df1e000 Deferred libxcomposite.so.1 ELF 7df1e000-7df27000 Deferred libxrandr.so.2 ELF 7df27000-7df31000 Deferred libxrender.so.1 ELF 7df31000-7df37000 Deferred libxxf86vm.so.1 ELF 7df37000-7df3b000 Deferred libxinerama.so.1 ELF 7df3b000-7df5d000 Deferred imm32<elf> \-PE 7df40000-7df5d000 \ imm32 ELF 7df5d000-7df64000 Deferred libxdmcp.so.6 ELF 7df64000-7df85000 Deferred libxcb.so.1 ELF 7df85000-7df9f000 Deferred libice.so.6 ELF 7df9f000-7e0d3000 Deferred libx11.so.6 ELF 7e0d3000-7e0e5000 Deferred libxext.so.6 ELF 7e0e5000-7e178000 Deferred winex11<elf> \-PE 7e0f0000-7e178000 \ winex11 ELF 7e178000-7e18e000 Deferred libz.so.1 ELF 7e18e000-7e228000 Deferred libfreetype.so.6 ELF 7e228000-7e247000 Deferred libtinfo.so.5 ELF 7e247000-7e269000 Deferred libncurses.so.5 ELF 7e27d000-7e292000 Deferred xinput1_3<elf> \-PE 7e280000-7e292000 \ xinput1_3 ELF 7e292000-7e2a6000 Deferred psapi<elf> \-PE 7e2a0000-7e2a6000 \ psapi ELF 7e2a6000-7e304000 Deferred dbghelp<elf> \-PE 7e2b0000-7e304000 \ dbghelp ELF 7e304000-7e391000 Deferred msvcrt<elf> \-PE 7e320000-7e391000 \ msvcrt ELF 7e391000-7e4c5000 Deferred wined3d<elf> \-PE 7e3a0000-7e4c5000 \ wined3d ELF 7e4c5000-7e4fe000 Deferred d3d9<elf> \-PE 7e4d0000-7e4fe000 \ d3d9 ELF 7e4fe000-7e573000 Deferred rpcrt4<elf> \-PE 7e510000-7e573000 \ rpcrt4 ELF 7e573000-7e67b000 Deferred ole32<elf> \-PE 7e590000-7e67b000 \ ole32 ELF 7e67b000-7e697000 Deferred dinput8<elf> \-PE 7e680000-7e697000 \ dinput8 ELF 7e697000-7e6d1000 Deferred winspool<elf> \-PE 7e6a0000-7e6d1000 \ winspool ELF 7e6d1000-7e7c9000 Deferred comctl32<elf> \-PE 7e6e0000-7e7c9000 \ comctl32 ELF 7e7c9000-7e833000 Deferred shlwapi<elf> \-PE 7e7e0000-7e833000 \ shlwapi ELF 7e833000-7ea44000 Deferred shell32<elf> \-PE 7e840000-7ea44000 \ shell32 ELF 7ea44000-7eb23000 Deferred comdlg32<elf> \-PE 7ea50000-7eb23000 \ comdlg32 ELF 7eb23000-7eb3c000 Deferred version<elf> \-PE 7eb30000-7eb3c000 \ version ELF 7eb3c000-7eb9c000 Deferred advapi32<elf> \-PE 7eb50000-7eb9c000 \ advapi32 ELF 7eb9c000-7ec59000 Deferred gdi32<elf> \-PE 7ebb0000-7ec59000 \ gdi32 ELF 7ec59000-7ed99000 Deferred user32<elf> \-PE 7ec70000-7ed99000 \ user32 ELF 7ef99000-7efa6000 Deferred libnss_files.so.2 ELF 7efa6000-7efc0000 Deferred libnsl.so.1 ELF 7efc0000-7efec000 Deferred libm.so.6 ELF 7efee000-7eff4000 Deferred libuuid.so.1 ELF 7eff4000-7f000000 Deferred libnss_nis.so.2 ELF b7411000-b7415000 Deferred libxau.so.6 ELF b7415000-b741e000 Deferred libnss_compat.so.2 ELF b741f000-b7424000 Deferred libdl.so.2 ELF b7424000-b75ca000 Deferred libc.so.6 ELF b75cb000-b75e6000 Deferred libpthread.so.0 ELF b75e9000-b75f2000 Deferred libsm.so.6 ELF b75fa000-b773c000 Dwarf libwine.so.1 ELF b773e000-b7760000 Deferred ld-linux.so.2 ELF b7760000-b7761000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 00000008 (D) Z:\opt\limbo\support\limbo\drive_c\Program Files\limbo\limbo.exe 00000009 0 <== 0000000e services.exe 00000020 0 0000001f 0 00000019 0 00000018 0 00000017 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001d 0 0000001a 0 00000014 0 00000013 0 0000001b plugplay.exe 00000021 0 0000001e 0 0000001c 0 00000022 explorer.exe 00000023 0 System information: Wine build: wine-1.4 Platform: i386 Host system: Linux Host version: 3.2.0-24-generic-pae

Search Results

Search found 18993 results on 760 pages for 'context info'.

Page 678/760 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685 | Next Page >

- by Benjamin

- by Your DisplayName here!

- by Matthew Guay

- by Aaron Lazenby

- by thatjeffsmith

- by Manju James

- by hajan

- by carewithl

- by pjohnson

- by kazimanzurrashid

- by Hanynowsky

- by Kathy.Miedema

- by [email protected]

- by Marco Russo (SQLBI)

- by jhenning

- by trond-arne.undheim

- by user69670

- by DigiMortal

- by Paulo Morgado

- by Luke

- by Tim Dexter

- by Brooks Moses

- by Laurent Bugnion

- by Janice J. Heiss

- by user61262

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685 | Next Page >