Search Results

Search found 181 results on 8 pages for 'ir'.

Page 7/8 | < Previous Page | 3 4 5 6 7 8  | Next Page >

  • Can't open COM1 from application launched at startup

    - by n0rd
    I'm using WinLIRC with IR receiver connected to serial port COM1 on Windows 7 x64. WinLIRC is added to Startup folder (Start-All applications-Startup) so it starts every time I log in. Very often (but not all the time) I see initialization error messages from WinLIRC, which continue for some time (couple of minutes) if I retry initialization, and after some retries it initializes correctly and works fine. If I remove it from Startup and start manually at any other moment it starts without errors. I've downloaded WinLIRC sources and added MessageBox calls here and there so I can see what happens during initialization and found out that CreateFile call fails: if((hPort=CreateFile( settings.port,GENERIC_READ | GENERIC_WRITE, 0,0,OPEN_EXISTING,FILE_FLAG_OVERLAPPED,0))==INVALID_HANDLE_VALUE) { char buffer[256]; sprintf_s(buffer, "CreateFile(%s) failed with %d", settings.port, GetLastError()); MessageBox(NULL, buffer, "debug", MB_OK); hPort=NULL; return false; } I see message box saying "CreateFile(COM1) failed with 5", and 5 is an error code for "Access denied" error according to this link. So the question is why opening COM-port can fail with such error right after booting Windows and proceed normally few seconds or minutes later?

    Read the article

  • question about siftdown operation on heap

    - by davit-datuashvili
    i have following pseudo code which execute siftdown operation on heap array suppose is x void siftdown(int n) pre heap(2,n) && n>=0 post heap(1,n) i=1; loop /*invariant heap(1,n) except perhaps between i and it's (0,1,or 2) children*/ c=2*i; if (c>n) break; // c is left child of i if (c+1)<=n /* c+1 is rigth child of i if (x[c+1]<x[c]) c++ /* c is lesser child of i if (x[i]<=x[c]) break; swap(c,i) i=c; i have wrote following code is it correct? public class siftdown{ public static void main(String[]args){ int c; int n=9; int a[]=new int[]{19,100,17,2,7,3,36,1,25}; int i=1; while (i<n){ c=2*i; if (c>n) break; //c is the left child of i if (c+1<=n) //c+1 ir rigth child of i if (a[c+1]<a[c]) c++; if (a[i]<=a[c]) break; int t=a[c]; a[c]=a[i]; a[i]=t; i=c; } for (int j=0;j<a.length;j++){ System.out.println(a[j]); } } } // result is 19 2 17 1 7 3 36 100 25

    Read the article

  • Parsing XML with Ruby and Nokogiri

    - by Chip Castle
    I have the following XML structure: <charsets> <charset> <name>ANSI_X3.4-1968</name> <aliases> <alias>iso-ir-6</alias> <alias>ANSI_X3.4-1986</alias> <alias>ISO_646.irv:1991</alias> <alias>ASCII</alias> <alias>ISO646-US</alias> <alias>US-ASCII</alias> <alias>us</alias> <alias>IBM367</alias> <alias>cp367</alias> <alias>csASCII</alias> </aliases> </charset> <charset> <name>ISO-10646-UTF-1</name> <aliases> <alias>csISO10646UTF1</alias> </aliases> </charset> </charsets> I can grab the text contents of the the name nodes using Ruby and Nokogiri using: require 'nokogiri' require 'open-uri' doc = Nokogiri::XML(File.open("StandardCharsets.xml")) @charsets = doc.css("charsets name").map {|node| node.children.text } But, what I want is the text contents of all name and alias nodes in the order as they are shown in the source document. Everything I try fails. Does anyone have a good example of how to do this?

    Read the article

  • Rails using plural table names even though I told it to use singular

    - by Jason Swett
    I tried to run rake test:profile and I got this error: ... Table 'mcif2.accounts' doesn't exist: DELETE FROM `accounts` I know accounts doesn't exist. It's called account. I know Rails uses plural table names by default but here's what my config/environment.rb looks like: # Load the rails application require File.expand_path('../application', __FILE__) # Initialize the rails application McifRails::Application.initialize! ActiveRecord::Base.pluralize_table_names = false And here's what db/schema.rb looks like: ActiveRecord::Schema.define(:version => 0) do create_table "account", :force => true do |t| t.integer "customer_id", :limit => 8, :null => false t.string "account_number", :null => false t.integer "account_type_id", :limit => 8 t.date "open_date", :null => false So I don't understand why Rails still wants to call it accounts sometimes. Any ideas? If it helps give any clues at all, here are the results of grep -ir 'accounts' *.

    Read the article

  • Query total page count via SNMP HP Laserjet

    - by Tim
    I was asked to get hold of the total pages counts for the 100+ printers we have at work. All of them are HP Laser or Business Jets of some description and the vast majority are connected via some form of HP JetDirect network card/switch. After many hours of typing in IP addresses and copying and pasting the relevant figure in to Excel I have now been asked to do this on a weekly basis. This led me to think there must be an easier way, as an IT professional I can surely work out some time saving method to solve this issue. Suffice it to say I do not feel very professional now after a day or so of trying to make SNMP work for me! From what I understand the first thing is to enable SNMP on the printer. Done. Next I would need something to query the SNMP bit. I decided to go open source and free and someone here recommended net-snmp as a decent tool (I would like to have just added the printers as nodes in SolarWinds but we are somewhat tight on licences apparently). Next I need the name of the MIB. For this I believe the HP-LASERJET-COMMON-MIB has the correct information in it. Downloaded this and added to net-snmp. Now I need the OID which I believe after much scouring is printed-media-simplex-count (we have no duplex printers, that we are interested in at least). Running the following command yields the following demoralising output: snmpget -v 2c -c public 10.168.5.1 HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1 (the OID was derived from running: snmptranslate -IR -On printed-media-simplex-count Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt .1.3.6.1.2.1.1.16.1.1.1 ) Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1: Am I barking up the wrong tree completely with this? My aim was to script it all to output to a file for all the IP addresses of the printers and then plonk that in Excel for my lords and masters to digest at their leisure. I have a feeling I am using either the wrong MIB or the wrong OID from said MIB (or both). Does anyone have any pointers on this for me? Or should I give up and go back to navigationg each printers web page individually (hoping not).

    Read the article

  • USB mouse disconnecting and reconnecting randomly and often

    - by Marc
    Specs: Q6600, evga 780I sli mobo, 4gig RAM, logitech MX518, windows 7 64bit, evga gtx 260, 650W power supply (single rail) The problem I am having is my mouse will reconnect/disconnect (will even hear the sounds from windows) and the light on the bottom of the mouse will turn off/turn on as it starts working again. It really sucks to be playing a game (and happens on desktop as well) for the mouse to just die out for a few seconds and come back. Sometimes it will not happen for days and other times it will do it 2 or more times within 15 seconds. I have tried two different wired mice, have tried multiple USB ports (on front of computer, back of computer, have also used a USB hub and have also plugged in a card that connects to the USB connectors on the motherboard and adds a few usb ports to the back of the computer, and I also bought a USB 2.0 PCI card and that did not help). Nothing else seems to reconnect like this, my usb keyboard has never once cut out like the mouse does and neither have any of the other devices I have connected (webcam, usb hub, various devices sometimes connected through usb cables, and IR reciever for windows media center remote). I have disconnected all usb devices except for my keyboard and mouse and the problem still occurs. I guess it could be something wrong with my motherboard but since no other devices behave similarly I'm just hoping that it is some kind of driver conflict. Installing logitech's drivers has had no effect. It seemed at first that if I go to device manager and uninstall HID-compliant mouse (that and logitech mx518 are listed) that would fix it but it doesn't seem to work anymore or at least not every time (it keeps reinstalling). I have googled "usb mouse disconnects and reconnects" and it seems to be fairly common but none of those were resolved. To stick some easy steps: It happens with or without the drivers installed It has happened with multiple mice on the same computer Bios is the latest version (P08) Motherboard drivers are the latest version Device manager is listing no problems on any USB devices Happens with every usb port, even addon usb cards Happens when all usb devices aside from mouse and keyboard are unplugged I read that maybe it is an IRQ conflict and I tried to look into that but did not really know what was going on, but didn't see anything obviously wrong. Thanks for any help guys, its driving me crazy!

    Read the article

  • Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

    - by user568458
    There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

    Read the article

  • Trabajando el redireccionamiento de usuarios/Working with user redirect methods

    - by Jason Ulloa
    La protección de las aplicaciones es un elemento que no se puede dejar por fuera cuando se elabora un sistema. Cada parte o elemento de código que protege nuetra aplicación debe ser cuidadosamente seleccionado y elaborado. Una de las cosas comunes con las que nos topamos en asp.net cuando deseamos trabajar con usuarios, es con la necesidad de poder redireccionarlos a los distintos elementos o páginas dependiendo del rol. Pues precisamente eso es lo que haremos, vamos a trabajar con el Web.config de nuestra aplicación y le añadiremos unas pequeñas líneas de código para lograr dar un poco mas de seguridad al sistema y sobre todo lograr el redireccionamiento. Así que veamos como logramos lo deseado: Como bien sabemos el web.config nos permite manejar muchos elementos dentro de asp.net, muchos de ellos relacionados con la seguridad, asi como tambien nos brinda la posibilidad de poder personalizar los elementos para poder adaptarlo a nuestras necesidades. Así que, basandonos en el principio de que podemos personalizar el web.config, entonces crearemos una sección personalizada, que será la que utilicemos para manejar el redireccionamiento: Nuestro primer paso será ir a nuestro web.config y buscamos las siguientes líneas: <configuration>     <configSections>  </sectionGroup>             </sectionGroup>         </sectionGroup> Y luego de ellas definiremos una nueva sección  <section name="loginRedirectByRole" type="crabit.LoginRedirectByRoleSection" allowLocation="true" allowDefinition="Everywhere" /> El section name corresponde al nombre de nuestra nueva sección Type corresponde al nombre de la clase (que pronto realizaremos) y que será la encargada del Redirect Como estamos trabajando dentro de la seccion de configuración una vez definidad nuestra sección personalizada debemos cerrar esta sección  </configSections> Por lo que nuestro web.config debería lucir de la siguiente forma <configuration>     <configSections>  </sectionGroup>             </sectionGroup>         </sectionGroup> <section name="loginRedirectByRole" type="crabit.LoginRedirectByRoleSection" allowLocation="true" allowDefinition="Everywhere" /> </configSections> Anteriormente definimos nuestra sección, pero esta sería totalmente inútil sin el Metodo que le da vida. En nuestro caso el metodo loginRedirectByRole, este metodo lo definiremos luego del </configSections> último que cerramos: <loginRedirectByRole>     <roleRedirects>       <add role="Administrador" url="~/Admin/Default.aspx" />       <add role="User" url="~/User/Default.aspx" />     </roleRedirects>   </loginRedirectByRole> Como vemos, dentro de nuestro metodo LoginRedirectByRole tenemos el elemento add role. Este elemento será el que posteriormente le indicará a la aplicación hacia donde irá el usuario cuando realice un login correcto. Así que, veamos un poco esta configuración: add role="Administrador" corresponde al nombre del Role que tenemos definidio, pueden existir tantos elementos add role como tengamos definidos en nuestra aplicación. El elemento URL indica la ruta o página a la que será dirigido un usuario una vez logueado y dentro de la aplicación. Como vemos estamos utilizando el ~ para indicar que es una ruta relativa. Con esto hemos terminado la configuración de nuestro web.config, ahora veamos a fondo el código que se encargará de leer estos elementos y de utilziarlos: Para nuestro ejemplo, crearemos una nueva clase denominada LoginRedirectByRoleSection, recordemos que esta clase es la que llamamos en el elemento TYPE definido en la sección de nuestro web.config. Una vez creada la clase, definiremos algunas propiedades, pero antes de ello le indicaremos a nuestra clase que debe heredar de configurationSection, esto para poder obtener los elementos del web.config.  Inherits ConfigurationSection Ahora nuestra primer propiedad   <ConfigurationProperty("roleRedirects")> _         Public Property RoleRedirects() As RoleRedirectCollection             Get                 Return DirectCast(Me("roleRedirects"), RoleRedirectCollection)             End Get             Set(ByVal value As RoleRedirectCollection)                 Me("roleRedirects") = value             End Set         End Property     End Class Esta propiedad será la encargada de obtener todos los roles que definimos en la metodo personalizado de nuestro web.config Nuestro segundo paso será crear una segunda clase (en la misma clase LoginRedirectByRoleSection) a esta clase la llamaremos RoleRedirectCollection y la heredaremos de ConfigurationElementCollection y definiremos lo siguiente Public Class RoleRedirectCollection         Inherits ConfigurationElementCollection         Default Public ReadOnly Property Item(ByVal index As Integer) As RoleRedirect             Get                 Return DirectCast(BaseGet(index), RoleRedirect)             End Get         End Property         Default Public ReadOnly Property Item(ByVal key As Object) As RoleRedirect             Get                 Return DirectCast(BaseGet(key), RoleRedirect)             End Get         End Property         Protected Overrides Function CreateNewElement() As ConfigurationElement             Return New RoleRedirect()         End Function         Protected Overrides Function GetElementKey(ByVal element As ConfigurationElement) As Object             Return DirectCast(element, RoleRedirect).Role         End Function     End Class Nuevamente crearemos otra clase esta vez llamada RoleRedirect y en este caso la heredaremos de ConfigurationElement. Nuestra nueva clase debería lucir así: Public Class RoleRedirect         Inherits ConfigurationElement         <ConfigurationProperty("role", IsRequired:=True)> _         Public Property Role() As String             Get                 Return DirectCast(Me("role"), String)             End Get             Set(ByVal value As String)                 Me("role") = value             End Set         End Property         <ConfigurationProperty("url", IsRequired:=True)> _         Public Property Url() As String             Get                 Return DirectCast(Me("url"), String)             End Get             Set(ByVal value As String)                 Me("url") = value             End Set         End Property     End Class Una vez que nuestra clase madre esta lista, lo unico que nos queda es un poc de codigo en la pagina de login de nuestro sistema (por supuesto, asumo que estan utilizando  los controles de login que por defecto tiene asp.net). Acá definiremos nuestros dos últimos metodos  Protected Sub ctllogin_LoggedIn(ByVal sender As Object, ByVal e As System.EventArgs) Handles ctllogin.LoggedIn         RedirectLogin(ctllogin.UserName)     End Sub El procedimiento loggeding es parte del control login de asp.net y se desencadena en el momento en que el usuario hace loguin correctametne en nuestra aplicación Este evento desencadenará el siguiente procedimiento para redireccionar.     Private Sub RedirectLogin(ByVal username As String)         Dim roleRedirectSection As crabit.LoginRedirectByRoleSection = DirectCast(ConfigurationManager.GetSection("loginRedirectByRole"), crabit.LoginRedirectByRoleSection)         For Each roleRedirect As crabit.RoleRedirect In roleRedirectSection.RoleRedirects             If Roles.IsUserInRole(username, roleRedirect.Role) Then                 Response.Redirect(roleRedirect.Url)             End If         Next     End Sub   Con esto, nuestra aplicación debería ser capaz de redireccionar sin problemas y manejar los roles.  Además, tambien recordar que nuestro ejemplo se basa en la utilización del esquema de bases de datos que por defecto nos proporcionada asp.net.

    Read the article

  • Tutorial: Criando um Componente para o UCM

    - by Denisd
    Então você já instalou o UCM, seguindo o tutorial: http://blogs.oracle.com/ecmbrasil/2009/05/tutorial_de_instalao_do_ucm.html e também já fez o hands-on: http://blogs.oracle.com/ecmbrasil/2009/10/tutorial_de_ucm.html e agora quer ir além do básico? Quer começar a criar funcionalidades para o UCM? Quer se tornar um desenvolvedor do UCM? Quer criar o Content Server à sua imagem e semelhança?! Pois hoje é o seu dia de sorte! Neste tutorial, iremos aprender a criar um componente para o Content Server. O nosso primeiro componente, embora não seja tão simples, será feito apenas com recursos do Content Server. Em um futuro tutorial, iremos aprender a usar classes java como parte de nossos componentes. Neste tutorial, vamos desenvolver um recurso de Favoritos, aonde os usuários poderão marcar determinados documentos como seus Favoritos, e depois consultar estes documentos em uma lista. Não iremos montar o componente com todas as suas funcionalidades, mas com o que vocês verão aqui, será tranquilo aprimorar este componente, inclusive para ambientes de produção. Componente MyFavorites Algumas características do nosso componente favoritos: - Por motivos de espaço, iremos montar este componente de uma forma “rápida e crua”, ou seja, sem seguir necessariamente as melhores práticas de desenvolvimento de componentes. Para entender melhor a prática de desenvolvimento de componentes, recomendo a leitura do guia Working With Components. - Ele será desenvolvido apenas para português-Brasil. Outros idiomas podem ser adicionados posteriormente. - Ele irá apresentar uma opção “Adicionar aos Favoritos” no menu “Content Actions” (tela Content Information), para que o usuário possa definir este arquivo como um dos seus favoritos. - Ao clicar neste link, o usuário será direcionado à uma tela aonde ele poderá digitar um comentário sobre este favorito, para facilitar a leitura depois. - Os favoritos ficarão salvos em uma tabela de banco de dados que iremos criar como parte do componente - A aba “My Content Server” terá uma opção nova chamada “Meus Favoritos”, que irá trazer uma tela que lista os favoritos, permitindo que o usuário possa deletar os links - Alguns recursos ficarão de fora deste exercício, novamente por motivos de espaço. Mas iremos listar estes recursos ao final, como exercícios complementares. Recursos do nosso Componente O componente Favoritos será desenvolvido com alguns recursos. Vamos conhecer melhor o que são estes recursos e quais são as suas funções: - Query: Uma query é qualquer atividade que eu preciso executar no banco, o famoso CRUD: Criar, Ler, Atualizar, Deletar. Existem diferentes jeitos de chamar a query, dependendo do propósito: Select Query: executa um comando SQL, mas descarta o resultado. Usado apenas para testar se a conexão com o banco está ok. Não será usado no nosso exercício. Execute Query: executa um comando SQL que altera informações do banco. Pode ser um INSERT, UPDATE ou DELETE. Descarta os resultados. Iremos usar Execute Query para criar, alterar e excluir os favoritos. Select Cache Query: executa um comando SQL SELECT e armazena os resultados em um ResultSet. Este ResultSet retorna como resultado do serviço e pode ser manipulado em IDOC, Java ou outras linguagens. Iremos utilizar Select Cache Query para retornar a lista de favoritos de um usuário. - Service: Os serviços são os responsáveis por executar as queries (ou classes java, mas isso é papo para um outro tutorial...). O serviço recebe os parâmetros de entrada, executa a query e retorna o ResultSet (no caso de um SELECT). Os serviços podem ser executados através de templates, páginas IDOC, outras aplicações (através de API), ou diretamente na URL do browser. Neste exercício criaremos serviços para Criar, Editar, Deletar e Listar os favoritos de um usuário. - Template: Os templates são as interfaces gráficas (páginas) que serão apresentadas aos usuários. Por exemplo, antes de executar o serviço que deleta um documento do favoritos, quero que o usuário veja uma tela com o ID do Documento e um botão Confirma, para que ele tenha certeza que está deletando o registro correto. Esta tela pode ser criada como um template. Neste exercício iremos construir templates para os principais serviços, além da página que lista todos os favoritos do usuário e apresenta as ações de editar e deletar. Os templates nada mais são do que páginas HTML com scripts IDOC. A nossa sequência de atividades para o desenvolvimento deste componente será: - Criar a Tabela do banco - Criar o componente usando o Component Wizard - Criar as Queries para inserir, editar, deletar e listar os favoritos - Criar os Serviços que executam estas Queries - Criar os templates, que são as páginas que irão interagir com os usuários - Criar os links, na página de informações do conteúdo e no painel My Content Server Pois bem, vamos começar! Confira este tutorial na íntegra clicando neste link: http://blogs.oracle.com/ecmbrasil/Tutorial_Componente_Banco.pdf   Happy coding!  :-)

    Read the article

  • Maze Navigation in Player Stage with Roomba

    - by Scott
    Here is my code: /* Scott Landau Robot Lab Assignment 1 */ // Standard Java Libs import java.io.*; // Player/Stage Libs import javaclient2.*; import javaclient2.structures.*; import javaclient2.structures.sonar.*; // Begin public class SpinningRobot { public static Position2DInterface pos = null; public static LaserInterface laser = null; public static void main(String[] args) { PlayerClient robot = new PlayerClient("localhost", 6665); laser = robot.requestInterfaceLaser(0, PlayerConstants.PLAYER_OPEN_MODE); pos = robot.requestInterfacePosition2D(0,PlayerConstants.PLAYER_OPEN_MODE); robot.runThreaded (-1, -1); pos.setSpeed(0.5f, -0.25f); // end pos float x, y; x = 46.0f; y = -46.0f; boolean done = false; while( !done ){ if(laser.isDataReady()) { float[] laser_data = laser.getData().getRanges(); System.out.println("== IR Sensor =="); System.out.println("Left Wall Distance: "+laser_data[360]); System.out.println("Right Wall Distance: " +laser_data[0]); // if laser doesn't reach left wall, move to detect it // so we can guide using left wall if ( laser_data[360] < 0.6f ) { while ( laser_data[360] < 0.6f ) { pos.setSpeed(0.5f, -0.5f); } } else if ( laser_data[0] < 0.6f ) { while(laser_data[0<0.6f) { pos.setSpeed(0.5f, 0.5f); } } pos.setSpeed(0.5f, -0.25f); // end pos? done = ( (pos.getX() == x) && (pos.getY() == y) ); } } } } // End I was trying to have the Roomba go continuously at a slight right curve, quickly turning away from each wall it came to close to if it recognized it with it's laser. I can only use laser_data[360] and laser_data[0] for this one robot. I think this would eventually navigate the maze. However, I am using the Player Stage platform, and Stage freezes when the Roomba comes close to a wall using this code, I have no idea why. Also, if you can think of a better maze navigation algorithm, please let me know. Thank you!

    Read the article

  • Adding Parsekit To An Xcode Project

    - by Garry
    I am trying to add the Parsekit framework to my OSX Xcode project. I've never added a 3rd party framework before and I can't get it to work right. I dragged the included Xcode project into my 'Groups & Files' pane and chose to Add it to my project. I then dragged Parsekit.framework underneath the Link Binary With Libraries heading. Then I double-clicked my target app and added Parsekit as a Direct Dependency. I also added libicucore.dylib as a Linked Library (as it says to do this on their site). Finally, in the Build settings tab of my target info I set the Header Search Paths to /Users/path/to/include/directory and the Other Linker Flags to -ObjC -all_load. Running this as a debug build work fine with no errors. However, when I build my app to release and then try to run the executable created, the app fails to load with the following error message: MyApp cannot be opened because of a problem. Check with the developer to make sure myApp works with this version of Mac OS X. Here is the dump from the crash reporter: Process: MyApp [11658] Path: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Identifier: com.yourcompany.MyApp Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [135] Date/Time: 2010-05-24 17:08:08.475 +0100 OS Version: Mac OS X 10.6.3 (10D573) Report Version: 6Interval Since Last Report: 133300 sec Crashes Since Last Report: 3 Per-App Crashes Since Last Report: 3 Anonymous UUID: DF0265E4-B5A0-45E1-8B71-D52A27CFDDCA Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dyld Error Message: Library not loaded: @executable_path/../Frameworks/ParseKit.framework/Versions/A/ParseKit Referenced from: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Reason: image not found Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 4 GB, SMC 1.47f2 Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB Memory Module: global_name AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27) Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports Network Service: AirPort, AirPort, en1 Network Service: Ethernet Adaptor (en6), Ethernet, en6 Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB Serial ATA Device: HL-DT-ST DVDRW GS23N USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 After building the app, in addition to the executable file, Xcode is also creating a file called MyApp.app.dSYM. Any idea what that is?? I am developing with Xcode 3.2.2 on an Intel MBP running 10.6.3. Many thanks for any help offered.

    Read the article

  • BASH, multiple arrays and a loop.

    - by S1syphus
    At work, we 7 or 8 hardrives we dispatch over the country, each have unique labels which are not sequential. Ideally drives are plugged in our desktop, then gets folders from the server that correspond to the drive name. Sometimes, only one hard drive gets plugged in sometimes multiples, possibly in the future more will be added. Each is mounts to /Volumes/ and it's identifier; so for example /Volumes/f00, where f00 is the identifier. What I want to happen, scan volumes see if any any of the drives are plugged in, then checks the server to see if the folder exists, if ir does copy folder and recursive folders. Here is what I have so far, it checks if the drive exists in Volumes: #!/bin/sh #Declare drives in the array ARRAY=( foo bar long ) #Get the drives from the array DRIVES=${#ARRAY[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points #I plan to use AFP eventually, but for the sake of ease #using a local mount. ServerMount="BigBlue" #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #Loop through each item in the array and check if exists on /Volumes for (( i=0;i<$DRIVES;i++)); do dir="$BaseDir/${ARRAY[${i}]}" if [ -d "$dir" ]; then echo "$dir exists, you win." else echo "$dir is not attached." fi done What I can't figure out how to do, is how to check the volumes for the server while looping through the harddrive mount points. So I could do something like: #!/bin/sh #Declare drives, and folder location in arrays ARRAY=( foo bar long ) ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) #Get the drives from the array DRIVES=${#ARRAY[@]} SERVERFOLDER=${#ARRAY1[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points ServerMount="BigBlue #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #List the contents from server directory into array ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) echo ${list[@]} for (( i=0;i<$DRIVES;i++)); (( i=0;i<$SERVERFOLDER;i++)); do dir="$BaseDir/${ARRAY[${i}]}" ser="${ARRAY1[${i}]}" if [ "$dir" =~ "$sir" ]; then cp "$sir" "$dir" else echo "$dir is not attached." fi done I know, that is pretty wrong... well very, but I hope it gives you the idea of what I am trying to achieve. Any ideas or suggestions?

    Read the article

  • Block element text overflow problem in IE7

    - by Adomas
    I'm making a "sort elements" web game using jQuery, HTML & CSS. While everything works fine in FF, IE8, Opera, Chrome, I'm having problem with IE7 wrapping words inside block elements. Here's how it looks in IE7 (wrong): Link (cannot post images as a new user) In IE8 the box with wrapped text would just expand to fit it whole in one line without any overflows. Sorry, can't give another link as a new user Don't mind the element order as it's random. Elements are dynamically generated by jQuery. HTML code: <div class="ui-sortable" id="area"> <span class="object">: </span> <span class="object">1998- </span> <span class="object">ISSN 1392-4087</span> <span class="object">, </span> <span class="object">. </span> <span class="object">nepriklausomas savaitraštis buhalteriams, finansininkams, auditoriams</span> <span class="object">. </span> <span class="object">. </span> <span class="object">. </span> <span class="object">Vilnius</span> <span class="object">1998- </span> <span class="object"><em>Apskaitos, audito ir mokesciu aktualijos</em></span> </div> CSS code (irrelevant info like fonts & colors removed): #area { min-height: 160px; width: 760px; } .object { display: block; float: left; text-align: center; width: auto; } Any comments on why does IE7 does that? How do I make these spans expand to fit the whole text in one line in IE7 and not wrap the text or make overflows?

    Read the article

  • Java - Error Message Help

    - by Brian
    In the Code, mem is a of Class Memory and getMDR and getMAR ruturn ints. When I try to compile the code I get the following errors.....how can I fix this? Computer.java:25: write(int,int) in Memory cannot be applied to (int) Input.getInt(mem.write(cpu.getMDR())); ^ Computer.java:28: write(int,int) in Memory cannot be applied to (int) mem.write(cpu.getMAR()); Here is the code for Computer: class Computer{ private Cpu cpu; private Input in; private OutPut out; private Memory mem; public Computer() { Memory mem = new Memory(100); Input in = new Input(); OutPut out = new OutPut(); Cpu cpu = new Cpu(); System.out.println(in.getInt()); } public void run() { cpu.reset(); cpu.setMDR(mem.read(cpu.getMAR())); cpu.fetch2(); while (!cpu.stop()) { cpu.decode(); if (cpu.OutFlag()) OutPut.display(mem.read(cpu.getMAR())); if (cpu.InFlag()) Input.getInt(mem.write(cpu.getMDR())); if (cpu.StoreFlag()) { mem.write(cpu.getMAR()); cpu.getMDR(); } else { cpu.setMDR(mem.read(cpu.getMAR())); cpu.execute(); cpu.fetch(); cpu.setMDR(mem.read(cpu.getMAR())); cpu.fetch2(); } } } Here is the code for Memory: class Memory{ private MemEl[] memArray; private int size; public Memory(int s) {size = s; memArray = new MemEl[s]; for(int i = 0; i < s; i++) memArray[i] = new MemEl(); } public void write (int loc, int val) {if (loc >=0 && loc < size) memArray[loc].write(val); else System.out.println("Index Not in Domain"); } public int read (int loc) {return memArray[loc].read(); } public void dump() { for(int i = 0; i < size; i++) if(i%1 == 0) System.out.println(memArray[i].read()); else System.out.print(memArray[i].read()); } } Here is the code for getMAR and getMDR: public int getMAR() { return ir.getOpcode(); } public int getMDR() { return mdr.read(); }

    Read the article

  • Middleware with generic communication media layer

    - by Tom
    Greetings all, I'm trying to implement middleware (driver) for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our servers (or a pda/laptop in used in field). Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Example: Device connects to our Linux server. New middleware instance is created (on the server) which announces itself to one of the running services (details are not important). The service is responsible for making sure that device's time is synchronized. So it asks the middleware what is the device's time, driver translates it to device language (protocol) and sends the message, device responses and driver again translates it for the service. This might seem as a bit overkill for such a simple request but imagine there are more complex requests which the driver must translate, also there are several versions of the device which use different protocol, etc. but would use the same time sync service. The goal is to abstract the devices through the drivers to be able to use the same service to communicate with them. Another example: we find out that the remote communications with the device are down. So we send somebody out with PDA, he connects to the device using USB cable. Starts up the application which has the same functionality as the timesync service. Again middleware instance is created (on the PDA) to translate communication between application and the device this time only using USB/serial media not TCP/IP as in previous example. I hope it makes more sense now :) Cheers, Tom

    Read the article

  • Syntax error while copying an multidimensional array to another in C

    - by mantuko
    We are programming a ST269 microcontroller which has two IR distance sensors. To calibrate these sensors we made one table for each sensor with the distance we measured and the corresponding value we get from the ADC. Now we want to use one function to approximate the values in between. So we defined two two-dimensional arrays (one for each sensor) as global variables. In our function we then want to copy the one array we want to work with to a working array and approximate our values. So here's the code: ... unsigned int ir_werte_re[][] = { {8,553}, ... {83,133} }; unsigned int ir_werte_li[][] = { {8,566}, ... {83,147} }; ... unsigned int geradenaproximation(unsigned int messwert, unsigned int seite) { unsigned int working_array[16][16]; unsigned int i = 0; if (seite == 0) { for (i = 0; i < sizeof(working_array); i++) { working_array[i][0] = ir_werte_li[i][0]; i++; } } else { for (i = 0; i < sizeof(working_array); i++) { working_array[i][0] = ir_werte_re[i][0]; i++; } } i = 0; unsigned int y1 = 0; unsigned int x1 = 0; ... } This code is in a file called sensor.c. We didn't write anything about our global arrays in the sensor.h should we? The sensor.h of course is included in our main.c and there the function is called. We also tried to copy the arrays via memcpy(working_array, ir_werte_li, sizeof(working_array)); And in every way we do this we get a syntax error near unsigned in the line where we're declaring unsigned int y1 = 0; and I'm pretty sure that there is no syntax error in this line : ) The last time I spend coding in C is a few years away so I'm not sure if the way we try to do this is good. Perhaps we can solve this by using a pointer instead of really copying the array or something. So please help me out I'll appreciate your bits on this.

    Read the article

  • Thursday Community Keynote: "By the Community, For the Community"

    - by Janice J. Heiss
    Sharat Chander, JavaOne Community Chairperson, began Thursday's Community Keynote. As part of the morning’s theme of "By the Community, For the Community," Chander noted that 60% of the material at the 2012 JavaOne conference was presented by Java Community members. "So next year, when the call for papers starts, put-in your submissions," he urged.From there, Gary Frost, Principal Member of Technical Staff, AMD, expanded upon Sunday's Strategy Keynote exploration of Project Sumatra, an OpenJDK project targeted at bringing Java to heterogeneous computing platforms (which combine the CPU and the parallel processor of the GPU into a single piece of silicon). Sumatra entails enhancing the JVM to make maximum use of these advanced platforms. Within this development space, AMD created the Aparapi API, which converts Java bytecode into OpenCL for execution on such GPU devices. The Aparapi API was open sourced in September 2011.Whether it was zooming-in on a Mandelbrot set, "the game of life," or a swarm of 10,000 Dukes in a space-bound gravitational dance, Frost's demos, using an Aparapi/OpenCL implementation, produced stunningly faster display results. He indicated that the Java 9 timeframe is where they see Project Sumatra coming to ultimate fruition, employing the Lamdas of Java 8.Returning to the theme of the keynote, Donald Smith, Director, Java Product Management, Oracle, explored a mind map graphic demonstrating the importance of Community in terms of fostering innovation. "It's the sharing and mixing of culture, the diversity, and the rapid prototyping," he said. Within this topic, Smith, brought up a panel of representatives from Cloudera, Eclipse, Eucalyptus, Perrone Robotics, and Twitter--ideal manifestations of community and innovation in the world of Java.Marten Mickos, CEO, Eucalyptus Systems, explored his company's open source cloud software platform, written in Java, and used by gaming companies, technology companies, media companies, and more. Chris Aniszczyk, Operations Engineering,Twitter, noted the importance of the JVM in terms of their multiple-language development environment. Mike Olson, CEO, Cloudera, described his company's Apache Hadoop-based software, support, and training. Mike Milinkovich, Executive Director, Eclipse Foundation, noted that they have about 270 tools projects at Eclipse, with 267 of them written in Java. Milinkovich added that Eclipse will even be going into space in 2013, as part of the control software on various experiments aboard the International Space Station. Lastly, Paul Perrone, CEO, Perrone Robotics, detailed his company's robotics and automation software platform built 100% on Java, including Java SE and Java ME--"on rat, to cat, to elephant-sized systems." Milinkovic noted that communities are by nature so good at innovation because of their very openness--"The more open you make your innovation process, the more ideas are challenged, and the more developers are focused on justifying their choices all the way through the process."From there, Georges Saab, VP Development Java SE OpenJDK, continued the topic of innovation and helping the Java Community to "Make the Future Java." Martijn Verburg, representing the London Java Community (winner of a Duke's Choice Award 2012 for their activity in OpenJDK and JCP), soon joined Saab onstage. Verburg detailed the LJC's "Adopt a JSR" program--"to get day-to-day developers more involved in the innovation that's happening around them."  From its London launching pad, the innovative program has spread to Brazil, Morocco, Latvia, India, and more.Other active participants in the program joined Verburg onstage--Ben Evans, London Java Community; James Gough, Stackthread; Bruno Souza, SOUJava; Richard Warburton, jClarity; and Cecelia Borg, Oracle--OpenJDK Onboarding. Together, the group explored the goals and tasks inherent in the Adopt a JSR program--from organizing hack days (testing prototype implementations), to managing mailing lists and forums, to triaging issues, to evangelism—all with the goal of fostering greater community/developer involvement, but equally importantly, building better open standards. “Come join us, and make your ecosystem better!" urged Verburg.Paul Perrone returned to profile the latest in his company's robotics work around Java--including the AARDBOTS family of smaller robotic vehicles, running the Perrone MAX platform on top of the Java JVM. Perrone took his "Rumbles" four-wheeled robot out for a spin onstage--a roaming, ARM-based security-bot vehicle, complete with IR, ultrasonic, and "cliff" sensors (the latter, for the raised stage at JavaOne). As an ultimate window into the future of robotics, Perrone displayed a "head-set" controller--a sensor directed at the forehead to monitor brainwaves, for the someday-implementation of brain-to-robot control.Then, just when it seemed this might be the end of the day's futuristic offerings, a mystery voice from offstage pronounced "I've got some toys"--proving to be guest-visitor James Gosling, there to explore his cutting-edge work with Liquid Robotics. While most think of robots as something with wheels or arms or lasers, Gosling explained, the Liquid Robotics vehicle is an entirely new and innovative ocean-going 'bot. Looking like a floating surfboard, with an attached set of underwater wings, the autonomous devices roam the oceans using only the energy of ocean waves to propel them, and a single actuated rudder to steer. "We have to accomplish all guidance just by wiggling the rudder," Gosling said. The devices offer applications from self-installing weather buoy, to pollution monitoring station, to marine mammal monitoring device, to climate change data gathering, to even ocean life genomic sampling. The early versions of the vehicle used C code on very tiny industrial micro controllers, where they had to "count the bytes one at a time."  But the latest generation vehicles, which just hit the water a week or so ago, employ an ARM processor running Linux and the ARM version of JDK 7. Gosling explained that vehicle communication from remote locations is achieved via the Iridium satellite network. But because of the costs of this communication path, the data must be sent in very small bursts--using SBD short burst data. "It costs $1/kb, so that rules everything in the software design,” said Gosling. “If you were trying to stream a Netflix video over this, it would cost a million dollars a movie. …We don't have a 'big data' problem," he quipped. There are currently about 150 Liquid Robotics vehicles out traversing the oceans. Gosling demonstrated real time satellite tracking of several vehicles currently at sea, noting that Java is actually particularly good at AI applications--due to the language having garbage collection, which facilitates complex data structures. To close-out his time onstage, Gosling of course participated in the ceremonial Java tee-shirt toss out to the audience…In parting, Chander passed the JavaOne Community Chairperson baton to Stephen Chin, Java Technology Evangelist, Oracle. Onstage in full motorcycle gear, Chin noted that he'll soon be touring Europe by motorcycle, meeting Java Community Members and streaming live via UStream--the ultimate manifestation of community and technology!  He also reminded attendees of the upcoming JavaOne Latin America 2012, São Paulo, Brazil (December 4-6, 2012), and stated that the CFP (call for papers) at the conference has been extended for one more week. "Remember, December is summer in Brazil!" Chin said.

    Read the article

  • OS X 10.9 Mavericks Kernel Panics out of the box

    - by Kevin
    OS X Kernel panics after a fresh install of OS X 10.9 on a 17" Macbook Pro. Anonymous UUID: D002464D-24B7-C2B5-3D83-1C0B02873B29 Wed Oct 30 11:08:17 2013 panic(cpu 1 caller 0xffffff8006edc19e): Kernel trap at 0xffffff7f88e0a96c, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffef7f88e309b8, CR3: 0x0000000009c2d000, CR4: 0x0000000000000660 RAX: 0x0fffffd0c7b30000, RBX: 0xffffef7f88e309b0, RCX: 0x0000000000000001, RDX: 0x000002f384d06471 RSP: 0xffffff80eff03d80, RBP: 0xffffff80eff03e70, RSI: 0x0000031384cfb168, RDI: 0xffffff80e8f05148 R8: 0xffffff801b0f8670, R9: 0x0000000000000005, R10: 0x0000000000004a24, R11: 0x0000000000000202 R12: 0xffffff801938b800, R13: 0x0000000000000005, R14: 0xffffff80e8f05148, R15: 0xffffff7f88e2ee20 RFL: 0x0000000000010006, RIP: 0xffffff7f88e0a96c, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffef7f88e309b8, Error code: 0x0000000000000002, Fault CPU: 0x1 Backtrace (CPU 1), Frame : Return Address 0xffffff80eff03a10 : 0xffffff8006e22f69 0xffffff80eff03a90 : 0xffffff8006edc19e 0xffffff80eff03c60 : 0xffffff8006ef3606 0xffffff80eff03c80 : 0xffffff7f88e0a96c 0xffffff80eff03e70 : 0xffffff7f88e09b89 0xffffff80eff03f30 : 0xffffff8006edda5c 0xffffff80eff03f50 : 0xffffff8006e3757a 0xffffff80eff03f90 : 0xffffff8006e378c8 0xffffff80eff03fb0 : 0xffffff8006ed6aa7 Kernel Extensions in backtrace: com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10ED6F331236]@0xffffff7f88e07000->0xffffff7f88e31fff BSD process name corresponding to current thread: kernel_task Mac OS version: 13A603 Kernel version: Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393 Kernel slide: 0x0000000006c00000 Kernel text base: 0xffffff8006e00000 System model name: MacBookPro5,2 (Mac-F2268EC8) System uptime in nanoseconds: 4634353513870 last loaded kext at 39203945245: com.viscosityvpn.Viscosity.tun 1.0 (addr 0xffffff7f89200000, size 32768) last unloaded kext at 147930318702: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f89110000, size 8192) loaded kexts: com.viscosityvpn.Viscosity.tun 1.0 com.viscosityvpn.Viscosity.tap 1.0 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.filesystems.autofs 3.0 com.apple.iokit.IOBluetoothSerialManager 4.2.0f6 com.apple.driver.AGPM 100.14.11 com.apple.driver.AppleMikeyHIDDriver 124 com.apple.driver.AppleHDA 2.5.2fc2 com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6 com.apple.GeForceTesla 8.1.8 com.apple.driver.AppleMikeyDriver 2.5.2fc2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.driver.AppleUpstreamUserClient 3.5.13 com.apple.driver.AppleMuxControl 3.4.12 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleSMCLMU 2.0.4d1 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AppleHWAccess 1 com.apple.driver.AppleMCCSControl 1.1.12 com.apple.driver.AppleLPC 1.7.0 com.apple.driver.SMCMotionSensor 3.0.4d1 com.apple.driver.AppleUSBTCButtons 240.2 com.apple.driver.AppleUSBTCKeyboard 240.2 com.apple.driver.AppleIRController 325.7 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 35 com.apple.iokit.SCSITaskUserClient 3.6.0 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.4.0 com.apple.driver.AppleUSBHub 650.4.4 com.apple.driver.AppleUSBEHCI 650.4.1 com.apple.driver.AppleFWOHCI 4.9.9 com.apple.driver.AirPort.Brcm4331 700.20.22 com.apple.driver.AppleAHCIPort 2.9.5 com.apple.nvenet 2.0.21 com.apple.driver.AppleUSBOHCI 650.4.1 com.apple.driver.AppleSmartBatteryManager 161.0.0 com.apple.driver.AppleRTC 2.0 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 2.0 com.apple.driver.AppleSMBIOS 2.0 com.apple.driver.AppleACPIEC 2.0 com.apple.driver.AppleAPIC 1.7 com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0 com.apple.nke.applicationfirewall 153 com.apple.security.quarantine 3 com.apple.driver.AppleIntelCPUPowerManagement 216.0.0 com.apple.kext.triggers 1.0 com.apple.iokit.IOSerialFamily 10.0.7 com.apple.AppleGraphicsDeviceControl 3.4.12 com.apple.driver.DspFuncLib 2.5.2fc2 com.apple.vecLib.kext 1.0.0 com.apple.iokit.IOAudioFamily 1.9.4fc11 com.apple.kext.OSvKernDSPLib 1.14 com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6 com.apple.iokit.IOSurface 91 com.apple.iokit.IOBluetoothFamily 4.2.0f6 com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8 com.apple.driver.AppleSMBusPCI 1.0.12d1 com.apple.driver.AppleGraphicsControl 3.4.12 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleHDAController 2.5.2fc2 com.apple.iokit.IOHDAFamily 2.5.2fc2 com.apple.driver.AppleSMBusController 1.0.11d1 com.apple.nvidia.classic.NVDAResmanTesla 8.1.8 com.apple.driver.IOPlatformPluginFamily 5.5.1d27 com.apple.iokit.IONDRVSupport 2.3.6 com.apple.iokit.IOGraphicsFamily 2.3.6 com.apple.driver.AppleSMC 3.1.6d1 com.apple.driver.AppleUSBMultitouch 240.6 com.apple.iokit.IOUSBHIDDriver 650.4.4 com.apple.driver.AppleUSBMergeNub 650.4.0 com.apple.driver.AppleUSBComposite 650.4.0 com.apple.driver.CoreStorage 380 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOAHCISerialATAPI 2.6.0 com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0 com.apple.iokit.IOUSBUserClient 650.4.4 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 600.34 com.apple.iokit.IOAHCIFamily 2.6.0 com.apple.iokit.IONetworkingFamily 3.2 com.apple.iokit.IOUSBFamily 650.4.4 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFINVRAM 2.0 com.apple.driver.AppleEFIRuntime 2.0 com.apple.iokit.IOHIDFamily 2.0.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 278.10 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.AppleKeyStore 2 com.apple.driver.DiskImages 371.1 com.apple.iokit.IOStorageFamily 1.9 com.apple.iokit.IOReportFamily 21 com.apple.driver.AppleFDEKeyStore 28.30 com.apple.driver.AppleACPIPlatform 2.0 com.apple.iokit.IOPCIFamily 2.8 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.pthread 1 com.apple.kec.corecrypto 1.0 System Profile: Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.42f4 Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100 Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100 AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22) Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 Serial ATA Device: Samsung SSD 840 Series, 120.03 GB Serial ATA Device: MATSHITADVD-R UJ-868 USB Device: Built-in iSight USB Device: BRCM2046 Hub USB Device: Bluetooth USB Host Controller USB Device: Apple Internal Keyboard / Trackpad USB Device: IR Receiver Thunderbolt Bus:

    Read the article

  • Improving SAS multipath to JBOD performance on Linux

    - by user36825
    Hello all I'm trying to optimize a storage setup on some Sun hardware with Linux. Any thoughts would be greatly appreciated. We have the following hardware: Sun Blade X6270 2* LSISAS1068E SAS controllers 2* Sun J4400 JBODs with 1 TB disks (24 disks per JBOD) Fedora Core 12 2.6.33 release kernel from FC13 (also tried with latest 2.6.31 kernel from FC12, same results) Here's the datasheet for the SAS hardware: http://www.sun.com/storage/storage_networking/hba/sas/PCIe.pdf It's using PCI Express 1.0a, 8x lanes. With a bandwidth of 250 MB/sec per lane, we should be able to do 2000 MB/sec per SAS controller. Each controller can do 3 Gb/sec per port and has two 4 port PHYs. We connect both PHYs from a controller to a JBOD. So between the JBOD and the controller we have 2 PHYs * 4 SAS ports * 3 Gb/sec = 24 Gb/sec of bandwidth, which is more than the PCI Express bandwidth. With write caching enabled and when doing big writes, each disk can sustain about 80 MB/sec (near the start of the disk). With 24 disks, that means we should be able to do 1920 MB/sec per JBOD. multipath { rr_min_io 100 uid 0 path_grouping_policy multibus failback manual path_selector "round-robin 0" rr_weight priorities alias somealias no_path_retry queue mode 0644 gid 0 wwid somewwid } I tried values of 50, 100, 1000 for rr_min_io, but it doesn't seem to make much difference. Along with varying rr_min_io I tried adding some delay between starting the dd's to prevent all of them writing over the same PHY at the same time, but this didn't make any difference, so I think the I/O's are getting properly spread out. According to /proc/interrupts, the SAS controllers are using a "IR-IO-APIC-fasteoi" interrupt scheme. For some reason only core #0 in the machine is handling these interrupts. I can improve performance slightly by assigning a separate core to handle the interrupts for each SAS controller: echo 2 /proc/irq/24/smp_affinity echo 4 /proc/irq/26/smp_affinity Using dd to write to the disk generates "Function call interrupts" (no idea what these are), which are handled by core #4, so I keep other processes off this core too. I run 48 dd's (one for each disk), assigning them to cores not dealing with interrupts like so: taskset -c somecore dd if=/dev/zero of=/dev/mapper/mpathx oflag=direct bs=128M oflag=direct prevents any kind of buffer cache from getting involved. None of my cores seem maxed out. The cores dealing with interrupts are mostly idle and all the other cores are waiting on I/O as one would expect. Cpu0 : 0.0%us, 1.0%sy, 0.0%ni, 91.2%id, 7.5%wa, 0.0%hi, 0.2%si, 0.0%st Cpu1 : 0.0%us, 0.8%sy, 0.0%ni, 93.0%id, 0.2%wa, 0.0%hi, 6.0%si, 0.0%st Cpu2 : 0.0%us, 0.6%sy, 0.0%ni, 94.4%id, 0.1%wa, 0.0%hi, 4.8%si, 0.0%st Cpu3 : 0.0%us, 7.5%sy, 0.0%ni, 36.3%id, 56.1%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 1.3%sy, 0.0%ni, 85.7%id, 4.9%wa, 0.0%hi, 8.1%si, 0.0%st Cpu5 : 0.1%us, 5.5%sy, 0.0%ni, 36.2%id, 58.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 5.0%sy, 0.0%ni, 36.3%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 5.1%sy, 0.0%ni, 36.3%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu8 : 0.1%us, 8.3%sy, 0.0%ni, 27.2%id, 64.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 0.1%us, 7.9%sy, 0.0%ni, 36.2%id, 55.8%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 0.0%us, 7.8%sy, 0.0%ni, 36.2%id, 56.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 0.0%us, 7.3%sy, 0.0%ni, 36.3%id, 56.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 0.0%us, 5.6%sy, 0.0%ni, 33.1%id, 61.2%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 0.1%us, 5.3%sy, 0.0%ni, 36.1%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 0.0%us, 4.9%sy, 0.0%ni, 36.4%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 0.1%us, 5.4%sy, 0.0%ni, 36.5%id, 58.1%wa, 0.0%hi, 0.0%si, 0.0%st Given all this, the throughput reported by running "dstat 10" is in the range of 2200-2300 MB/sec. Given the math above I would expect something in the range of 2*1920 ~= 3600+ MB/sec. Does anybody have any idea where my missing bandwidth went? Thanks!

    Read the article

  • Como Exportar Crystal Reports a Excel, Word, Rich Text, PDF ó HTML

    - by jaullo
    Cuando trabajamos con reportes siempre requerimos la funcionalidad de exportación. En crystal reports para asp.net, realizar esta tarea es sumamente sencillo. Sin embargo la pregunta más grande que salta siempre, es como realizarlo utilizando código Behind. Para poder acceder a las librerias de crystal y sus componentes, primero debemos importar los espacios de nombres: Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Imports CrystalDecisions.CrystalReports.Engine Imports CrystalDecisions.Shared  CrystalDecisions.CrystalReports.Engine, nos servirá para poder manejar nuestro reportDocument y CrystalDecisions.Shared, será el medio que utilicemos para la exportación. Así que, veamos como podemos exportar nuestro informe sin tener que enviarlo a la impresora, recordemos que por defecto crystal reports ya tiene la opcion de exportar a PDF sin embargo debemos hacerlo tal como si fueramos a imprimir y que es lo que evitaremos acá. Colocamos un botón en nuestra pagina asp Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <asp:Button ID="btntopdf" runat="server" Text="Exportar a PDF" /> Y en nuestro boton deberemos ejecutar la siguiente rutina: Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Protected Sub btntodpf_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btntopdf.Click          'Cargar reporte. Enlazando a la fuente de datos.        LoadReporte()          'Mas adelante veremos que estas lineas las podemos obviar        Response.Buffer = False        Response.Clear()  'ClearContent, ClearHeaders          reporteDoc.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "NombreArchivo")       End Sub LoadReport, es el encargado de llenar nuestro crystal con la fuente de datos. Está fue la primer forma de exporta nuestro crystal reports, pero no es la única, así que vamos a ver otra forma en la cual utilizaremos el metodo v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} ExportToHttpResponse  Para este metodo, nuestro código en el botón cambia relativamente, pero antes de ello, daremos un repaso a los metodos utilizados. Nuestro primer parametro FormatType es un valor de tipo ExportFormatType, que puede corresponder a cualquiera de los metodos que enumeramos a continuación: CrystalReport: El formato al cual se exporta es de Tipo CrystalReport. Excel: El formato al cual se exporta es de tipo Excel ExcelRecord: El formato al cual se exporta es de Tipo Excel Record. NoFormat: No se ha especificado un formato de exportación. PortableDocFormat: El formato al cual se exporta es de Tipo PDF.  No voy a enumerar todos, pues me imagino que ya sabrán la idea de cada uno de los formatos, los numerados arriba son los mas importantes. Nuestro segundo parametro el objeto response nos permite adozar el archivo. Y por último, nuestro tercer parametro, definirá si debe ir como un objeto adjunto o no. Si lo colocamos en TRUE, estaremos enviando nuestro archivo como parametro, esto hará que no necesitemos las siguientes líneas de código: Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Response.Buffer = False Response.Clear()   Con esto realizado, ya contamos con la posibilidad de enviar el archivo directamente al cliente.   Ahora si, veamos cuanto se ha reducido nuestro código: Unicamente nos quedan dos líneas de código en nuestro botón Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}        'Cargar reporte. Enlazando a la fuente de datos.        LoadReport()          reporteDoc.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, True, "NombreArchivo")   Para finalizar, nada mas decir que espero esto les sea de ayuda y por supuesto,  que les facilite la vida con el uso de crystal reports.

    Read the article

  • Not All “Viruses” Are Viruses: 10 Malware Terms Explained

    - by Chris Hoffman
    Most people seem to call every type of malware a “virus”, but that isn’t technically accurate. You’ve probably heard of many more terms beyond virus: malware, worm, Trojan, rootkit, keylogger, spyware, and more. But what do all these terms mean? These terms aren’t just used by geeks. They make their way into even mainstream news stories about the latest web security problems and tech scares. Understanding them will help you understand the dangers your\ hear about. Malware The word “malware” is short for “malicious software.” Many people use the word “virus” to indicate any type of harmful software, but a virus is actually just a specific type of malware. The word “malware” encompasses all harmful software, including all the ones listed below. Virus Let’s start with viruses. A virus is a type of malware that copies itself by infecting other files,  just as viruses in the real world infect biological cells and use those biological cells to reproduce copies of themselves. A virus can do many different things — watch in the background and steal your passwords, display advertisements, or just crash your computer — but the key thing that makes it a virus is how it spreads. When you run a virus, it will infect programs on your computer. When you run the program on another computer, the virus will infect programs on that computer, and so on. For example, a virus might infect program files on a USB stick. When the programs on that USB stick are run on another computer, the virus runs on the other computer and infects more program files. The virus will continue to spread in this way. Worm A worm is similar to a virus, but it spreads a different way. Rather than infecting files and relying on human activity to move those files around and run them on different systems, a worm spreads over computer networks on its own accord. For example, the Blaster and Sasser worms spread very quickly in the days of Windows XP because Windows XP did not come properly secured and exposed system services to the Internet. The worm accessed these system services over the Internet, exploited a vulnerability, and infected the computer. The worm then used the new infected computer to continue replicating itself. Such worms are less common now that Windows is properly firewalled by default, but worms can also spread in other ways — for example, by mass-emailing themselves to every email address in an effected user’s address book. Like a virus, a worm can do any number of other harmful things once it infects a computer. The key thing that makes it a worm is simply how it spreads copies of itself. Trojan (or Trojan Horse) A Trojan horse, or Trojan, is a type of malware that disguises itself as a legitimate file. When you download and run the program, the Trojan horse will run in the background, allowing third-parties to access your computer. Trojans can do this for any number of reasons — to monitor activity on your computer, to join your computer to a botnet. Trojans may also be used to open the floodgates and download many other types of malware onto your computer. The key thing that makes this type of malware a Trojan is how it arrives. It pretends to be a useful program and, when run, it hides in the background and gives malicious people access to your computer. It isn’t obsessed with copying itself into other files or spreading over the network, as viruses and worms are. For example, a piece of pirated software on an unscrupulous website may actually contain a Trojan. Spyware Spyware is a type of malicious software that spies on you without your knowledge. It collects a variety of different types of data, depending on the piece of spyware. Different types of malware can function as spyware — there may be malicious spyware included in Trojans that spies on your keystrokes to steal financial data, for example. More “legitimate” spyware may be bundled along with free software and simply monitor your web browsing habits, uploading this data to advertising servers so the software’s creator can make money from selling their knowledge of your activities. Adware Adware often comes along with spyware. It’s any type of software that displays advertising on your computer. Programs that display advertisements inside the program itself aren’t generally classified as malware. The kind of “adware” that’s particularly malicious is the kind that abuses its access to your system to display ads when it shouldn’t. For example, a piece of harmful adware may cause pop-up advertisements to appear on your computer when you’re not doing anything else. Or, adware may inject additional advertising into other web pages as you browse the web. Adware is often combined with spyware — a piece of malware may monitor your browsing habits and use them to serve you more targeted ads. Adware is more “socially acceptable” than other types of malware on Windows and you may see adware bundled with legitimate programs. For example, some people consider the Ask Toolbar included with Oracle’s Java software adware. Keylogger A keylogger is a type of malware that runs in the background, recording every key stroke you make. These keystrokes can include usernames, passwords, credit card numbers, and other sensitive data. The keylogger then, most likely, uploads these keystrokes to a malicious server, where it can be analyzed and people can pick out the useful passwords and credit card numbers. Other types of malware can act as keyloggers. A virus, worm, or Trojan may function as a keylogger, for example. Keyloggers may also be installed for monitoring purposes by businesses or even jealous spouses. Botnet, Bot A botnet is a large network of computers that are under the botnet creator’s control. Each computer functions as a “bot” because it’s infected with a specific piece of malware. Once the bot software infects the computer, ir will connect to some sort of control server and wait for instructions from the botnet’s creator. For example, a botnet may be used to initiate a DDoS (distributed denial of service) attack. Every computer in the botnet will be told to bombard a specific website or server with requests at once, and such millions or requests can cause a server to become unresponsive or crash. Botnet creators may sell access to their botnets, allowing other malicious individuals to use large botnets to do their dirty work. Rootkit A rootkit is a type of malware designed to burrow deep into your computer, avoiding detection by security programs and users. For example, a rootkit might load before most of Windows, burying itself deep into the system and modifying system functions so that security programs can’t detect it. A rootkit might hide itself completely, preventing itself from showing up in the Windows task manager. The key thing that makes a type of malware a rootkit is that it’s stealthy and focused on hiding itself once it arrives. Ransomware Ransomware is a fairly new type of malware. It holds your computer or files hostage and demands a ransom payment. Some ransomware may simply pop up a box asking for money before you can continue using your computer. Such prompts are easily defeated with antivirus software. More harmful malware like CryptoLocker literally encrypts your files and demands a payment before you can access them. Such types of malware are dangerous, especially if you don’t have backups. Most malware these days is produced for profit, and ransomware is a good example of that. Ransomware doesn’t want to crash your computer and delete your files just to cause you trouble. It wants to take something hostage and get a quick payment from you. So why is it called “antivirus software,” anyway? Well, most people continue to consider the word “virus” synonymous with malware as a whole. Antivirus software doesn’t just protect against viruses, but against all types of malware. It may be more accurately referred to as “antimalware” or “security” software. Image Credit: Marcelo Alves on Flickr, Tama Leaver on Flickr, Szilard Mihaly on Flickr     

    Read the article

  • CodePlex Daily Summary for Sunday, July 14, 2013

    CodePlex Daily Summary for Sunday, July 14, 2013Popular ReleasesVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...JSLint.NET: JSLint.NET 0.9.1 Beta: Version 0.9.1 Beta includes: JSLint.NET Console: Console help available using the /? switch (or no arguments). See the Console Options page for more. JSLint.NET for Visual Studio: Support linked JSLintNet.json file. More about this file on the JSLint.NET Settings page. Hide un-implemented menu items. Prefix JSLint errors in the task list. JSLint.NET Core: Allow ignoring of individual files in JSLintNet.json.TypePipe: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of the TypePipe for .NET 4.5. Find the complete release notes for the build here: Release Notes.re-linq: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of re-linq for .NET 4.5. Find the complete release notes for the build here: Release Notes To use re-linq with .NET 3.5, use a 1.13.x build.Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsSearch for Team Foundation Server workitems changes: Release 1.2: - Issue 1184 fixed, - Changeset's comboboxes sorted by Id (From : Ascending - To : Descending) - Application window iconImpulse Media Player: Impulse Media Player 3.5.0.1: Fixed a crash that occurs when copying data from lastfm to file panelPhoneGuitarTab: Release 1.1: Improved UX. Simplified navigation. More performance improvements coming soon.The GLMET Project: Get OS Version: --DataDevelop: Beta 0.6.5: Hotfix bug in Python Table.ImportAll method Updated External Libraries Fixes in Excel Exportation Modify ConnectionString refreshes the Properties Window correctlyUser Group Labs: User Group Data: 01.00.00: This release has the following updates and new features: Initial release with a minimal feature set Easy to use (just add to the social group details page) Edit common user group properties System Requirements DNN v07.00.02 or newer .Net Framework v4.0 or newerCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130709): Product documentation and additional templates for this version is included in the zip archive, or if you want individual files, visit the http://www.carrotware.com website. Templates, in addition to those found in the download, can be downloaded individually from the website as well. If you are coming from earlier versions, make a precautionary backup of your existing website files and database. When installing the update, the database update engine will create the new schema items (if you...Dalmatian Build Script: Dalmatian Build 0.1.3.0: -Minor bug fixes -Added Choose<T> and ChooseYesNo to Console objectPushover.NET: Pushover.NET - Stable Release 10 July 2013: This is the first stable release of Pushover.NET. It includes 14 overloads of the SendNotification method, giving you total flexibility of sending Pushover notifications from your client. Assembly is built to .NET 2.x so it can be called from .NET 2.x, 3.x and 4.x projects. Also available is the Test Harness. This is a small GUI that you can use to test calls to Pushover.NET's main DLL. It's almost fully functional--the sound effects haven't been fully configured so no matter what you pick ...MCEBuddy 2.x: MCEBuddy 2.3.14: 2.3.14 BETA is available through the Early Access Program.Click here https://mcebuddy2x.codeplex.com/discussions/439439 for details and to get access to Early Access Program to download latest releases. Changelog for 2.3.14 (32bit and 64bit) NEW FEATURES: 1. ENHANCEMENTS: 2. Improved eMail notifications 3. Improved metrics details 4. Support for larger history (INI) file (about 45,000 sections, each section can have about 1500 entries) BUG FIXES: 5. Fix for extracting Movie release year from...Azure Depot: Flask: Flask Version 01LINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneModern UI for WPF: Modern UI 1.0.5: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE This version is backwards incompatible. ModernDialog.ShowMessage returns MessageBoxResult instead of bool? Related downloads NuGet ModernUI for WPF is also available as NuGet package in the NuGet gallery, id: ModernUI.WPF Download Modern UI for WPF Templates A Visual Studio 2012 extension containing a collection of project and item templates for Modern UI for WPF. The extensi...New ProjectsA Domain-Driven Design Framework for .Net: A .Net framework library for applying the domain-driven design approach to develop business software.a Linq to Workitem provider: Wilinq is a linq to workitem provider. It also contains WIQL to expression tree parser. Wilinq is based on the the fissum project source codeApprentice for WP: Apprentice for WPArgo New Deal: Data Type DBL DAL UI ToolsC# Practice: C# PracticeDardemEvo: summaryDavid.A.Zhang: Personal class LibrayEnglish Practice Helper: English Practice Helper is a C# window form application for everyone want to practice writing,speaking,listening and reading skill with your OWN computerFinancialManagement: FinancialManagementGoAgent GUI: GoAgent??????。GoAgent: https://code.google.com/p/goagentIndustrial Programming: Industrial Programming approaches tips (it's old and in russian language)ISS.IR.RRN-MS: Summary Tany :PLifeDataManager: Web project to manage some dataMixERP - ERP Solution That Sucks Less: A humble ERP solution that does not scare the users, MixERP is a purely mult-establishment and multi-currency solution.Nokia Portal: Install Nokia, HTC and LG apps on any WP8 devicePenn State SWENG 581 Team 5 Su13.2: This project is an academic extension of the NClass project found at http://nclass.sourceforge.net for the purposes of software testing and quality assurance.Pomp: testProfessor Oak's Pokemon Library DotNet: The Professor Oak's Pokemon Library is a .NET class library that aims to help programmers, by providing different tools to modify the game memory.Pure Music Player: Pure Music PlayerRandomly Balanced Trees: C# Implementations of Treap and Skiplist data structures. Which are representations of randomly balanced binary trees.ReoScript: JavaScript-like script language engine for .NET application. Easy to plug in .NET program and make API extension for script. SQL Queries: This is for all developers help.SqlSetup: This project create SQL server database automatically. Truco Pythons: Truco Argentino (Argentine truc), is a card game developed in python by Argentine programmers of the UNGS (General Sarmiento National University). WebServer .NET: Projekt zawiera oprogramowanie i zestaw narzedzi do zarzadzania serwerem http. Posiada wiele funkcjonalnosci ulatwiajacych korzystanie i konfigurowanie serwera.workspaces: solr exampleWP8NativeAccess: Win32 API wrappers for Windows Phone 8. Intended to be used in WP8 WinRT apps. Includes FileSystem project.

    Read the article

  • CodePlex Daily Summary for Monday, March 26, 2012

    CodePlex Daily Summary for Monday, March 26, 2012Popular ReleasesQuick Performance Monitor: Version 1.8.1: Added option to set main window to be 'Always On Top'. Use context (right-click) menu on graph to toggle..Net Rest API for Kayako Fusion 4: kayako_rest_api_2012.03.26: Added ability to search for users via organisation/email. This is much quicker than getting all users then filtering.GeoMedia PostGIS data server: PostGIS GDO 1.0.1.1: This is a new version of GeoMeda PostGIS data server which supports user rights. It means that only those feature classes, which the current user has rights to select, are visible in GeoMedia. Issues fixed in this release Fixed a problem when gdo.gfeaturesbase table has been visible in GeoMedia. To hide this table, run the previous version of Database Utilities and uncheck this table in the feature classes list. Then load the new release. Fixed a problem when coordinate system list has not...Silverlight 4 & 5 Persian DatePicker: Silverlight 4 and 5 Persian DatePicker: Added Silverlight 5 support.Y.Music: Y.Music v.1.0: ?????? ?????? ?????????. ????????: ????? ???? ????, ??????? ?????? ? ??? - Beta.Asp.NET Url Router: v1.0: build for .net 2.0 and .net 4.0menu4web: menu4web 0.0.3: menu4web 0.0.3ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Final: This release installs both the ArcGIS Editor for OSM Server Component and/or ArcGIS Editor for OSM Desktop components. The Desktop tools allow you to download data from the OpenStreetMap servers and store it locally in a geodatabase. You can then use the familiar editing environment of ArcGIS Desktop to create, modify, or delete data. Once you are done editing, you can post back the edit changes to OSM to make them available to all OSM users. The Server Component allows you to quickly create...Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...XNA Electric Effect: Jason Electric Effect v1.1: The library now includes 3 effect types: Line, Bezier, CatmullRom, providing different look and feel.DotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Change default Share-site group SharePoint Online (Office 365): Change default Share-site group SharePoint Online: As default when we share a site collection or site with external users, SharePoint Online show default SharePoint groups which are Visitors and Members. By using this feature, you will get a link which you can use to customize the default groups to your custom groups and other default groups.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.Working with Social Data: Tag Cloud Customization: http://swatipoint.blogspot.com/2011/10/sharepoint-2010-social-featurestagging.htmlWebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...New ProjectsASIVeste: No description availableAuthor-it Sync Headings Plug-in: Author-it plug-in that allows the user to synchronize the Print, Help, and Web headings with the Description for each selected topic.BlogEngine.Web: BlogEngine.Web is a BlogEngine.Net converted to use Web Application Project model (WAP).Code Writer Helper: A quick solution to help code generator writers.CodeUITest: Practise CodeUI automation.DAX Studio: Excel Add-In for PowerPivot and Analysis Services Tabular projects that will include an Object Browser, query editing and execution, formula and measure editing ,syntax highlighting, integrated tracing and query execution breakdowns.Fated: Fated is an isometric-viewed, tile-based tactical RPG developed in C# using XNA to be deployed to XBox. This includes a character generation core, graphics engine, and storyline parser.iSufe???: “iSufe???”??????????????????????????????。???????????、????、?????????,??????????????。??,????iOS/Android/WAP???????,???????????????。????GPLv2??,?????????????。Kinect test project: Basic project for my kinect test applicationLoLTimers: LoLTimers by Christian Schubert 2012. Version 1.0.0.0 This is a small app that lets you keep track of the most important creep camp cooldowns. Developed in Visual Studio C#.London Priority Security Services Ltd: LPSS - London Priority Security Services LtdNMCNPM: code nhóm nmcnpmOffice 365 Anonymous Access Manager Sandbox Solution: The sandbox solution enables you to manage anonymous access of lists on Office 365. It allows setting read, modifying and adding rights. Additionally the configuration page adds the necessary events to be able to use moderations, when anonymous users are creating a list item. The second feature in the solution enables anonymous access on blogs sites, it allows to enable anonymous users to comment on a blog.Office 365 Google Analytics: This sandbox solution enables google analytics everywhere in your site collection. This allows you to use the google analytics reporting on all your Office 365 sites.Office 365 Mobile Access Enables for Public Sites & Blogs: This sandbox solution enables mobile access on Office 365 sites.OwnMFCSolution: MFC test solution.People Data Generator: Need to load a bunch of test data to represent people (e.g. name, address, phone, etc.)? Wish it looked realistic? People Data Generator is what you need. Features: *Realistic names *Realistic addresses, using real towns and postal codes *Realistic phone numbers and emails *Very ExtensibleProventi: Met dit programma kan je je voorraad van je onderneming beheren. Dit programma zal in eerste instantie gebruikt worden binnen de minionderneming Proventi. Het programma is geschreven in VB.Net en maakt gebruik van SQL Server CE voor de gegevensopslag.qCommerce: ??????????? ???????, ???????????? ??? ????? qSoftwareQuanLyOTo: Ð? án môn h?c C# qu?n lý garage ô tôRoyaSoft.ir Resources: i am use this project for my personal web site :)SGPF: The team does not have nothing to declare here!SharePoint 2010 Autocomplete Lookup Field: Autocomplete Lookup field allows type ahead functionality while entering lookup values in list items.Sharing Photos using SignalR: An MVC application using SignalR that can be used to share photos between friends and get realtime updates. An user connected to the website can upload a photo which will be automatically broadcasted to all clients connected at that point.Sistema Hoteleiro: Sistema Hoteleiro é o meu trabalho final da disciplina Arquitetura de Aplicativos Ambiente .NET da 4a turma do curso de pós-graduação de especialização em Arquitetura de Sistemas Distribuídos oferecido pelo Instituto de Educação Continuada da Pontifícia Universidade Católica de MSoftware Revolution: This project is core information site of Software Revolution named company which provides software solutions.tgryi: tgyrivbWSUS: Really decide which and when to install updates from a centralized server, globally or per host : - installation schedule - updates to install - email results - configure extra Windows Update parameters Works with WSUS server or Windows Update from Microsoft. See README.txt for more informations ! :) Current official website is http://sourceforge.net/projects/vbwsus/XamlCombine: Combines multiple XAML resource dictionaries in one. Replaces DynamicResources to StaticResources. And sort them in order of usage.XNA Shader-free Linear Burn effect: Sample demonstrating a Linear Burn effect in XNA without using custom shaderszhCms: zhCmszhtest: my test project

    Read the article

  • CodePlex Daily Summary for Wednesday, December 12, 2012

    CodePlex Daily Summary for Wednesday, December 12, 2012Popular ReleasesTorrents-List Organizer: Torrents-list organizer v 0.5.0.3: ????????? ? 0.5.0.3: 1) ?????????? ??????? ??? ?????????? ???-??????? ? ???????-??????. 2) ? ??????? ?????? ??????????? ?????????????? ????? ?????????? ?????????: ???? ?? ??????-???? ?????????? ?? ????????? ?? ????? ???????, ?? ? ????? ????? ????????? ????? ????????? ?? ????, ? ????????? ??? ???? ?????? ??????????.Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Simple Injector: Simple Injector v1.6.1: This patch release fixes a bug in the integration libraries that disallowed the application to start when .NET 4.5 was not installed on the machine (but only .NET 4.0). The following packages are affected: SimpleInjector.Integration.Web.dll SimpleInjector.Integration.Web.Mvc.dll SimpleInjector.Integration.Wcf.dll SimpleInjector.Extensions.LifetimeScoping.dllBootstrap Helpers: Version 1: First releasesheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.2.0: Main featuresOptimizations for intersectionsThe main purpose of this release was to further optimize rendering performance by skipping object intersections with other sheets. From now by default an object's sheets will only intersect its own sheets and never other static or dynamic sheets. This is the usual scenario since objects will never bump into other sheets when using collision detection. DocumentationMany of you have been asking for proper documentation, so here it goes. Check out the...MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.5.5 beta: Fix Bug: max_allowed_packet is modified to 1GB, but does not take effect in import & export process. This bug is fixed by re-initialize the MySqlConnection. Modified max_allowed_packet will only take effect on new connection, not on current connection.DirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesDirectXTex texture processing library: December 2012: December 11, 2012 Ex versions of CreateTexture, CreateShaderResourceView, DDSTextureLoader and WICTextureLoader Fixed BC2 and BC3 decompression issue for unusual color encoding case Converted annotation to SAL2 for improved VS 2012 /analyze experience Updated DirectXTex, DDSView, and Texconv with VS 2010 + Windows 8.0 SDK project using official 'property sheets'ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...Ad Rotator for Windows & Windows Phone: AdRotator v1.3 Silverlight: Note now also available via NuGet for both WP7 and WP8 v 1.3 Changelog: *Updated Ad Providers to Latest releases, inc: - Inneractive (new Nokia release) - Updated WP Smaato - MS Ad SDK Changed Caching strategy to always grab from network unless unavailable Pubcenter (Suspend/Resume) feature added Pubcenter "Active" fix option Cleaned up some threaded calls Other minor fixes For usage details check out the following tutorial blog post - http://bit.ly/S5CD4T *Note Included bin...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1211.1240 Fixed: changed to using the thumbnailPhoto attribute instead of jpegPhoto v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.New ProjectsBattle of Colors: Vacation project. Summary.blockme: This is a Blog using C#, ASP.Net MVC3 & RazorCoevery for Windows Phone: Coevery for Windows Phone is a free CRM Windows Phone application developed by Nova Software which is a .NET focused software development company.DNN Flash Viewer: Simple module for displaying flash content within a DNN pane.DonablRow Line Follower Simulator: This Application helps you to find the best Algorithm for your line follower robot.ExcelMerge: Merge microsoft excel file to a single.FCMGAAI: project ini merupakan implementasi algoritma fuzzy Cmeans dengan optimasi algoritma genetikaLIRC#: LIRC# is a simple client library to allow a .NET application to interact with an LIRC server to control or be controlled by IR devices.Managed Media Aggregation: Allowing developers to aggregate media from Rtsp sources over Rtsp without degrading the source bandwidth. Agnostic of Video or Audio format. Decodes Jpeg / RTPMarket Data Server: Local database server with quotes and trade-related data associated with equity, fixed-income, financial derivatives, currency, and other investment instrumentsproject13251212: papproject13271212: paPutovanje: Android aplikacija napisana za Mtel android ligu 2Questionario dinâmico: Questionario dinâmico para fins de estudos.Rasoulian: my RepoSharepoint Blog Archive Web Part: This Web Part is an alternative of the standart SharePoint Blog Site Archives Web Part. It's based on SharePoint 2010 Blog Site Archives Web Part by Bandar AlSimpleSocket for Windows Phone: SimpleSocket for Windows Phone is a super simple to use wrap around the built in socket framework that makes using socket connections incredibly easy and fast.

    Read the article

  • OK - What now? How do we become a Social Business?

    - by Michael Snow
    We hope that those of you that attended yesterday's Webcast with Brian Solis enjoyed Brian's discussion with Christian Finn for our last Webcast of the season for the Oracle Social Business Thought Leaders Series.  For those of you that may have missed the webcast or were stuck at a company holiday party - you'll be glad to hear that the webcast will be available On-Demand starting later today (12/14/12). And any of you who'd like to listen to a quick but informative podcast with Brian - can listen to that here. Some of you may still be left with questions about how to get from point A to point B and even more confused than when you started thinking about this new world of Digital Darwinism. The post below, grabbed from an abundance of great thought leadership prose on Brian's blog may help you frame the path you need to start walking sooner versus later to stay off of the endangered species list.  As you explore your path forward, please keep Oracle in mind - we do offer a wide range of solutions to help your organization 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} optimize the engagement for your customers, employees and partners. The Path from a Social Brand to a Social Business Brian Solis Originally posted May 2, 2012 I’ve been a long-time supporter of MediaTemple’s (MT)Residence program along with Gary Vaynerchuk, Neil Patel, and many others whom I respect. I wanted to share my “7 questions to answer to become a social business” with you here.. Social Media is pervasive and is becoming the new normal in corporate marketing. Brands who get this right are starting to build their own media networks rich with customer connections numbering in the millions. Right now, Coca-Cola has over 34 million fans on Facebook, but they’re hardly alone. Disney follows just behind with 29 million fans, Starbucks boasts 25 million, and Oreo, Red Bull, and Converse play host to over 20 million fans. If we were to look at other networks such as Twitter and Youtube, we would see a recurring theme. People are connecting en masse with the businesses they support and new media represents the ability to cultivate consumer relationships in ways not possible with traditional earned or paid media. Sounds great right? This might sound abrupt, but the truth is that we’re hardly realizing the potential of what lies before us. Everything begins with understanding not just how other brands are marketing themselves in social media, but also seeing what they’re not doing and envisioning what’s possible. We’re already approaching the first of many crossroads that new media will present. Do we take the path of a social brand or that of a social business? What’s the difference? A social brand is just that, a business that is remodeling or retrofitting its existing marketing practices to new media. A social business is something altogether different as it embraces introspection and extrospection to reevaluate internal and external processes, systems, and opportunities to transform into a living, breathing entity that adapts to market conditions and opportunities. It’s a tough decision to make right now especially at a time when all we read about is how much success many businesses are finding without having to answer this very question. With all of the newfound success in social networks, the truth is that we’re only just beginning to learn what’s possible and that’s where you come in. When compared to the investment in time and resources across the board, social media represents only a small part of the mix. But with your help, that’s all about to change. The CMO Survey, an organization that disseminates the opinions of top marketers in order to predict the future of markets, recently published a report that gave credence to the fact that social media is taking off. One of the most profound takeaways from the report was this gem; “The “like button” [in Facebook] packs more customer-acquisition punch than other demand-generating activities.” With insights like this, it’s easy to see why the race to social is becoming heated. The report also highlighted exactly where social fits in the marketing mix today and as you can see, despite all of the hype, it’s not a dominant focus yet. As of August 2011, the percentage of overall marketing budgets dedicated to social media hovered at around 7%. However, in 2012 the investment in social media will climb to 10%. And, in five years, social media is expected to represent almost 18% of the total marketing budget. Think about that for a moment. In 2016, social media will only represent 18%? Queue the sound of a record scratching here. With businesses finding success in social networks, why are businesses failing to realize the true opportunity brought forth by the ability to listen to, connect with, and engage with customers? While there’s value in earning views, driving traffic, and building connections through the 3F’s (friends, fans and followers), success isn’t just defined simply by what really amounts to low-hanging fruit. The truth is that businesses cannot measure what it is they don’t know to value. As a result, innovation in new engagement initiatives is stifled because we’re applying dated or inflexible frameworks to new paradigms. Social media isn’t owned by marketing, but instead the entire organization. This changes everything and makes your role so much more important. It’s up to you to learn how to think outside of the proverbial social media box to see what others don’t, the ability to improve customers experiences through the evolution of a social brand into a social business. Doing so will translate customer insights from what they do and don’t share in social networks into better products, services, and processes. See, customers want something more from their favorite businesses than creative campaigns, viral content, and everyday dialogue in social networks. Customers want to be heard and they want to know that you’re listening. How businesses use social media must remind them that they’re more than just an audience, consumer, or a conduit to “trigger” a desired social effect. Herein lies both the challenge and opportunity of social media. It’s bigger than marketing. It’s also bigger than customer service. It’s about building relationships with customers that improve experiences and more importantly, teaches businesses how to re-imagine products and internal processes to better adapt to potential crises and seize new opportunities. When it comes down to it, Twitter, Facebook, Youtube, Foursquare, are all channels for listening, learning, and engaging. It’s what you do within each channel that builds a community around your brand. And, at the end of the day, the value of the community you build counts for everything. It’s important to understand that we cannot assume that these networks simply exist for people to lineup for our marketing messages or promotional campaigns. Nor can we assume that they’re reeling in anticipation for simple dialogue. They want value. They want recognition. They want access to exclusive information and offers. They need direction, answers and resolution. What we’re talking about here is the multidimensional makeup of consumers and how a one-sided approach to social media forces the needs for social media to expand beyond traditional marketing to socialize the various departments, lines of business, and functions to engage based on the nature of the situation or opportunity. In the same CMO study, it was revealed that marketers believe that social media has a long way to go toward integrating into the overall company strategy. On a scale of 1-7, with one being “not integrated at all” and seven being “very integrated,” 22% chose “one.” Critical functions such as service, HR, sales, R&D, product marketing and development, IR, CSR, etc. are either not engaged or are operating social media within a silo disconnected from other efforts or possibilities. The problem is that customers don’t view a company by silo, instead they see one company, one brand, and their experience in social media forms an impression that eventually contributes to their view of your brand. The first step here is to understand business priorities and objectives to assess how social media can be additive in achieving these goals. Additionally, surveying the landscape to determine other areas of interest as its specifically related to your business. • Are customers seeking help or direction? • Who are your most valuable customers and what are they sharing? • How can you use social media to acquire and retain customers? - What ideas are circulating and how can you harness user generated activity and content to innovate or adapt to better meet the needs of customers? - How can you broaden a single customer view to recognize the varying needs of customers and how your organization can organize around each circumstance? - What insights exist based on how consumers are interacting with one another? How can this intelligence inform marketing, service, products and other important business initiatives? - How can your business extend their current efforts to deliver better customer experiences and in turn more effectively unit internal collaboration and communication? Customer demands far exceed the capabilities of the marketing department. While creating a social brand is a necessary endeavor, building a social business is an investment in customer relevance now and over time. Beyond relevance, a social business fosters a culture of change that unites employees and customers and sets a foundation for meaningful and beneficial relationships. Innovation, communication, and creativity are the natural byproducts of engagement and transformation. As a social brand, we are competing for the moment. As a social business, we are competing the future in all that we do today.

    Read the article

< Previous Page | 3 4 5 6 7 8  | Next Page >