Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 702/956 | < Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >

• Ubuntu Server mdadm drbd ocfs2 kvm hangs under heavy file reading

  - by Stefano Annese

  I have deployed four ubuntu 10.04 server. They are coupled two by two in a cluster scenario. on both sides we have software raid1 disks, drbd8 and OCFS2 and on top of it some kvm machines run with qcow2 disks. I followed this: Link corosync is just used for DRBD and OCFS, the kvm machines are run "manually" When it works is fine: good performances, good I/O, but at a given time one of the two cluster started hanging. Then we tried with just one server turned on and it hangs the same. It seems to happen when an heavy READ in one of the virtual machines occurs, that is during rsyn backup. When the fact occurs the virtual machines are not reachable any more and the real server responds with good delay to the ping but no screen and no ssh is available. All we can do is force shutdown (hold the button) and restart and when it turns on again the raid on which relay drbd is resyncing. All the time it hangs we see such fact. After a couple of week of pain on one side this morning also the other cluster hung, but it has different moteherboard, ram, kvm instances. What is similar is reading for rsync scenario and Western Digital RAID Edistion disks on both side. Can anybody give me some input to solve such issue?

  Read the article

• newsubtitles line not working in FFmpeg

  - by godMode

  i'm trying to run the following line on FFmpeg that will basically "re-format" an MKV file to MP4 without doing any re-encoding and also embed SRT subtitles onto the MP4 output: ffmpeg -i test.mkv -i test.srt -newsubtitle -acodec copy -vcodec copy test.mp4 Without the "-i test.srt -nwesubtitle" bit, it seems to work just fine; however, with it I get the following output: Seems stream 0 codec frame rate differs from container frame rate: 47.95 (5000000/104271) - 23.98 (24000/1001) Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Subtitle: 0x0000 Metadata: title : English Stream #0.2(jpn): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : Japanese 2.0 Stream #0.3(eng): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : English 2.0 Stream #0.4(eng): Subtitle: 0x0000 Metadata: title : English Songs & Signs Stream #0.5: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.6: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.7: Attachment: 0x0000 Metadata: filename : ChaparralPro-BoldIt.ttf Stream #0.8: Attachment: 0x0000 Metadata: filename : ChaparralPro-SemiboldIt.ttf Stream #0.9: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.10: Attachment: 0x0000 Metadata: filename : epminbld_opening.ttf Stream #0.11: Attachment: 0x0000 Metadata: filename : Folks-Bold.ttf Stream #0.12: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.13: Attachment: 0x0000 Metadata: filename : WarnockPro-LightDisp.ttf Stream #0.14: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.15: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.16: Attachment: 0x0000 Metadata: filename : Marker SD 1.2.ttf Stream #0.17: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.18: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.19: Attachment: 0x0000 Metadata: filename : MyriadPro-SemiCn.ttf test.srt: Invalid data found when processing input I tried adding "-r pal", "-r ntsc" or "-r 23.98" thinking it was framerate issue with no change.

  Read the article

• Error importing large MySQL dump file which includes binary BLOBs in Windows

  - by Daniel Magliola

  I'm trying to import a MySQL dump file, which I got from my hosting company, into my Windows dev machine, and i'm running into problems. I'm importing this from the command line, and i'm getting a very weird error: ERROR 2005 (HY000) at line 3118: Unknown MySQL server host '+?*á±dÆ-N+Æ·h^ye"p-i+ Z+-$?P+Y.8+|?+l8/l¦¦î7æ¦X¦XE.ºG[ ;-ï?éµ?º+¦¦].?+f9d릦'+ÿG?-0à¡úè?-?ù??¥'+NÑ' (11004) I'm attaching the screenshot because i'm assuming the binary data will get lost... I'm not exactly sure what the problem is, but two potential issues are the size of the file (2 Gb) which is not insanely large, but it's not trivially small either, and the other is the fact that many of these tables have JPG images in them (which is why the file is 2Gb large, for the most part). Also, the dump was taken in a Linux machine and I'm importing this into Windows, not sure if that could add to the problems (I understand it shouldn't) Now, that binary garbage is why I think the images in the file might be a problem, but i've been able to import similar dumps from the same hosting company in the past, so i'm not sure what might be the issue. Also, trying to look into this file (and line 3118 in particular) is kind of impossible given its size (i'm not really handy with Linux command line tools like grep, sed, etc). The file might be corrupted, but i'm not exactly sure how to check it. What I downloaded was a .gz file, which I "tested" with WinRar and it says it looks OK (i'm assuming gz has some kind of CRC). If you can think of a better way to test it, I'd love to try that. Any ideas what could be going on / how to get past this error? I'm not very attached to the data in particular, since I just want this as a copy for dev, so if I have to lose a few records, i'm fine with that, as long as the schema remains perfectly sound. Thanks! Daniel

  Read the article

• Why is SMF manifest losing configuration data when exported on SmartOS?

  - by Scott Lowe

  I'm running a server process under SMF (Server Management Facility) on Joyent's Base64 1.8.1 SmartOS image. For those not aqauinted with SmartOS, it is a cloud-based distribution of IllumOS with KVM. But essentially it is like Solaris and inherits from OpenSolaris. So even if you've not used SmartOS, I'm hoping to tap into some Solaris knowledge on ServerFault. My issue is that I want an unprivileged user to be allowed to restart a service that they own. I have worked out how to do that by using RBAC and adding an authorisation to /etc/security/auth_attr and associating that authorisation with my user. I then added the following to my SMF manifest for the service: <property_group name='general' type='framework'> <!-- Allow to be restarted--> <propval name='action_authorization' type='astring' value='solaris.smf.manage.my-server-process' /> <!-- Allow to be started and stopped --> <propval name='value_authorization' type='astring' value='solaris.smf.manage.my-server-process' /> </property_group> And this works well when imported. My unprivileged user is allowed to restart, start and stop its own server process (this is for automated code deployments). However, if I export the SMF manifest, this configuration data is gone... all I see in that section is this: <property_group name='general' type='framework'> <property name='action_authorization' type='astring'/> <property name='value_authorization' type='astring'/> </property_group> Does anybody know why this is happening? Is my syntax wrong, or am I simply not using SMF incorrectly?

  Read the article

• How to get multipath working for Ubuntu Server 12.04

  - by mlampi

  I'm working on a project which aims to make use of Ubuntu servers running on enterprise class hardware. In our case that means IBM HS23E blade servers, QLogic 4GB fibre channel extension cards and quite old IBM DS4500 disk array with two controllers. At the moment we have fibre channel as only boot option and Ubuntu Server 12.04 installed just fine and is able to boot without multipath. I'm not a linux professional myself but in our team we have people who will understand the technical stuff. Don't let my post confuse :) The current situation is that we have only one fibre channel connection to a single disk array controller. Real life case would be of course quite different. At minimum we should have two fibre channel ports connected to two different switches and two different controllers. However, we have no idea how to set up multipath tool. Is the DM-MPIO the right software? At minimum we should be able to boot when multiple connections are available and achieve fault tolerance when any of them should be down. Since the disk array is not the latest hardware, I managed to find RDAC driver sources only for 2.6.x kernel. And we have 3.2.x. Another issue is to build a multipath.conf. The said driver sources are from IBM support and the QLogic drivers provided to Ubuntu installer are from Ubuntu site. It seems that RHEL and SLES would have near out of the box support but that is not an option for our project. Actual questions: - What is the recommended software tool for multipath for Ubuntu Server 12.04? - Is there available pre-made configurations or templates? Does it require disk array / controller specific settings or do a more generic config work? - Do you have expriences on similar setup and like to share the knowledge? I'll provide you with any additional information you might require. Thanks in advance.

  Read the article

• App-V Problems After SCCM 2007 SP2 Upgrade

  - by GAThrawn

  We're running an SCCM (MS System Centre Config Manager, successor to SMS) 2007 environment and delivering a number of applications to clients virtualized using App-V 4.5.1. The App-V apps are delivered by SCCM in Download-and-Execute, not streaming mode. The SCCM environment was recently service packed to SCCM 2007 SP2 (amongst other things this gives Win7 support). We also pushed out the updated SCCM clients to our workstations. This seems to have broken file associations for virtual apps for a large number of our users. The users can still open their App-V apps by finding the specific app on their Start Menu and clicking it's icon, but double-clicking an associated file in Explorer, or opening an email attachment gives the "This action is only valid for installed applications" error. There is a Technet blog entry from the App-V team talking about this issue "Upgrade to ConfigMgr 2007 SP2 may break App-V File Type Associations" but running the script there comes back saying "The User Interface option has been updated" but hasn't seemed to fix the problems for any of our users. Unfortunately the Technet blogs don't seem to have comments switched on so you can't see how this has worked out for other people. Anyone else had this problem, have you found any other way to fix it?

  Read the article

• What is the latest on Microsoft Expressoin Studio licensing?

  - by DanM

  In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

  Read the article

• Remote Desktop *from* Windows 2008 R2 Server

  - by freefaller

  Summary: how do I create an RDC connection from a Windows 2008 server to another server? Our client will only allow us to connect to their server via a static IP address (which is fair enough), but unfortunately as we're a very small company we don't have one in the office. As a work around, we had the connection working through our old Windows 2003 server (dynamic-cloud from 1and1). .. however we have just rebuilt the server to run under Windows 2008 R2 (don't ask, but it was necessary), and now I simply cannot get the connection working. I have added an "Outbound Rule" to Windows Firewall with Advanced Security (TCP, All local ports, 3389 remote port - I have also tried the other way around). I have added a packet filter IP security rule with the same details. The 1and1 firewall rules (through their online control panel) allows for 3389 TCP and UDP. But it is simply not connecting (yes, the server is definitely on and able to accept connections) with the general error of... Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Is there anything obvious I've missed - or something I can use to find out where the request is being blocked? The new server is using the exact same IP address as before, so I don't believe that would be an issue. Unless it's trying to use an IPv6 address rather than the old IPv4 address that it was before? I apologise that I am not a network person by trade, but I know more than anybody else in my office!!

  Read the article

• Why Virtual Box won't give me option to create 64 bits guests?

  - by Eduardo Born

  My host is x64 bits Windows 8.1. I downloaded the latest Virtual Box (4.3) and I'm trying to create a VM with a 64 bits Ubuntu OS (ubuntu-12.04.3-desktop-amd64). When I go to New VM wizard, it doesn't give me option to select "Ubuntu (x64)" as I have seen in other people's screenshots, only just "Ubuntu". As a result, the ISO can't boot. I tried in another PC and Virtual Box gives the x64 variants to most listed OS... Control Panel shows x64 OS, x64 processor. My host laptop is a Sony Vaio VPCZ22UGX/N, Intel® Core™ i7-2640M processor. CPUz shows Vx-t is available on my processor, of course. Here is what I tried so far: I enabled IO APIC as required in the docs. I have virtualization enabled in the BIOS. It works fine in VMware. Check that Hyper-V is not running or even installed on my Windows. Same for VMware. I also tried running the command: VBoxManage modifyvm [vmname] --longmode on for that VM, but no change.. I think the issue is really that I can't select x64 variant of the Ubuntu OS for that VM. Other people seem to indicate that's a requirement, but I don't get that option for some reason. I spent a lot of time and can't find what's wrong... Anyone knows what could be missing here? Thank you very much!! Eduardo

  Read the article

• IIS 7.5 FTP Service crashes after installation of Advanced Logging 1.0 Module

  - by Jeremy

  I've recently been tasked with setting up two new productions servers for an ASP.Net application. The servers sit behind a F5 Load Balancer, which in turn forwards the end users IP address forward via the standard X_Forwarded_For HTTP Header. All of the reading that I have done suggests that I need to install the IIS Advanced Logging Module in order to take advantage of the X_Forwarded_For HTTP Header. Some quick background: Both of the web servers are Windows 2008 R2 Standard (x64), with IIS 7.5 installed and configured. The FTP Role has also been installed, configured and is operational. The Issue After installing the IIS Advanced Logging module via the Web Platform Installer, I noticed the following Error in the Event Viewer: The FTP Service encountered an error trying to read configuration data from file \?\C:\Windows\system32\inetsrv\config\applicationHost.config, line number 374. The error message is: Unrecognized element 'advancedLogging' Trying to connect over FTP to either of the web servers results in a 530. I've spent 2 hours scouring Google trying to find a solution, short of uninstalling the Advanced Logging Module. As far as I can tell, there is no way to turn off Advanced Logging on a site per site basis. Help would be appreciated.

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• Automated Scanning for Corrupted Archive Files

  - by Synetech inc.

  Hi, I have all kinds of files that I have downloaded from everywhere over the years scattered around my hard drives. I’m in the process of trying to organize them all and have run into a problem. Sometimes a file was not downloaded correctly (this was a big issue when Chromium first came out) and is thus corrupt. For media files, this is relatively simple to determine (it requires actually opening and examining the file). For executables or other binaries, it is relatively difficult (executables may or may not crash, other binaries could be completely unknown). Archive files (eg zip, rar, 7z, exe, ace, etc.) however should be pretty simple, they have a built-in corruption detection facility. My problem now is that I really don’t want to open and test each and every single archived file throughout my drive; that would be a nightmare. I’m looking for a utility that can automate the process. Is there a program that can scan archive files on a drive and list the ones that are corrupt? Thanks a lot.

  Read the article

• Strange windows boot problem - My computer won't boot from hard disk

  - by user29779

  Hello, Until yesterday, I had windows XP installed on my computer. After installing the OS, and setting the BIOS to boot from the hard-disk first, I discovered a strange problem - the OS wasn't booted and the only way I could get it to load was to insert a windows installation disk, enter repair mode, do "fixboot" and restart. The problem only occured when the computer was booted after shut-down. If I only restarted it, everything worked fine. Yesterday, I upgraded my XP to win7 and the problem persists. I tried the same "trick" I did with XP to get it to load, by entering repair and doing "bootrec /fixmbr" and "bootrec /fixboot" but that didn't work (and when I run "scanos" it didn't find any windows installations). Eventually, I got it to load by changing the settings in the BIOS to boot from CD first and HD second, removing the installation disk from the drive, letting it fail to boot from CD and then re-insert the disk. Anyone has any idea what may be the cause or how can I investigate this issue? Thanks! Marina

  Read the article

• Setting "Run WWW service in IIS 5.0 isolation mode" does not persist in IIS 6

  - by Saul Dolgin

  Our IIS server was recently patched with the latest Microsoft Security Updates and since then, I am unable to enable the "Run WWW service in IIS 5.0 isolation mode" setting. This setting was enabled prior to patching and somehow changed during the updates. I have tried both using the IIS Manager console and the adsutil.vbs approach to change it. Either way, after resetting IIS for the change to take effect, when I go to verify that the isolation mode setting is enabled (true) I find that is reverts back to being disabled (false). Now... The patches have already been rolled back, however the setting still does not persist when I enable it. While I am trying to research the patches that were applied to see if there is a known issue (or perhaps a change in this setting's behavior) I was hoping someone else might have come across the same problem. Any help towards a workaround would be greatly appreciated! >cscript adsutil.vbs set W3SVC/IIs5IsolationModeEnabled TRUE IIs5IsolationModeEnabled : (BOOLEAN) True >iisreset Attempting stop... Internet services successfully stopped Attempting start... Internet services successfully restarted >cscript adsutil.vbs get W3SVC/IIs5IsolationModeEnabled IIs5IsolationModeEnabled : (BOOLEAN) False

  Read the article

• Error when starting qpidd as a service

  - by Sparks

  I have recently swapped from CENTOS 5 to FEDORA 17. Previously I have created my own init.d scripts successfully (albeit not for qpidd) however, in FEDORA I cannot get it to work. I have created the following script (called qpidd) in the init.d directory: #!/bin/bash # # /etc/rc.d/init.d/qpidd # # QPID/AMQP Broker scripts # # # chkconfig: 2345 20 80 # description: QPID/AMQP Broker service # processname: qpidd # pidfile: /var/lock/subsys/qpidd # Source function library. . /etc/init.d/functions SERVICENAME=qpidd start() { echo -n "Starting $SERVICENAME: " daemon qpidd -d & retval=$? touch /var/lock/subsys/$SERVICENAME return $retval } stop() { echo -n "Shutting down $SERVICENAME: " qpidd -q & retval=$? rm -f /var/lock/subsys/$SERVICENAME return $retval } case "$1" in start) start ;; stop) stop ;; status) status qpidd ;; restart) stop start ;; condrestart) [ -f /var/lock/subsys/<service> ] && restart || : ;; *) echo "Usage: $SERVICENAME {start|stop|status|restart" exit 1 ;; esac exit $? After this, I ran chkconfig --add qpidd, however, now when I run sudo service qpidd start I get the following message: Starting qpidd (via systemctl): Job failed. See system journal and 'systemctl status' for details. If I then run systemctl status qpidd I get the following message: Failed to issue method call: Unit name qpidd is not valid. I am now lost, I have search the web and Stack Overflow but cannot find anybody with similar problem, any help or direction to a website that can help would be much appreciated Sparks :)

  Read the article

• PPP kernel module fails to load

  - by Harel

  I am trying to deal with a problem on a server I don't normally deal with. Out of the blue a script using ppp started failing saying that the ppp kernel module is not loaded. When I try to modprobe it it complains about files missing. Note below that the kernel version the server thinks it at, does not match the kernel version directory in /lib/modules. I'm not sure how this could have happened. Could the other maintainers of the server botched a kernel upgrade? My question is how can I fix this discrepancy. Can I simply rename the lib directory and hope for the best? I don't want to break stuff for the people who actually maintain the server but I do need to fix the PPP issue. $ sudo /sbin/modprobe -v ppp FATAL: Could not load /lib/modules/2.6.35.4-rscloud/modules.dep: No such file or directory $ cat /proc/version Linux version 2.6.35.4-rscloud ([email protected]) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #8 SMP Mon Sep 20 15:54:33 UTC 2010 $ ls /lib/modules/ 2.6.33.5-rscloud

  Read the article

• Architecture for highly available MySQL with automatic failover in physically diverse locations

  - by Warner

  I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

  Read the article

• Exchange 2007 OWA returns blank page with url xxxxx&reason=0

  - by Dayton Brown

  Hi All: I've just run into an issue with my exchange OWA. It returns a blank page with the url string https://www.xxxxxxxx/&reason=0. Nothing in the logs gives me any good reasons. Here's what I've done so far; 1) reinstall Exchange roll-up 7. 2) recreate virtual directories. 3) reboot. (this was mostly a shot in the dark, but what the hell) Exchange via rpc/https is still working great. Anyone run into this before? EDIT Here is the last snippet from the OWASetupLog. doesn't look like anything blew up. [09:45:36] ******************************************* [09:45:36] * UpdateOwa.ps1: 5/27/2009 9:45:36 AM [09:45:40] Updating OWA on server HOMER [09:45:40] Finding OWA install path on the filesystem [09:45:40] Updating OWA to version 8.1.375.2 [09:45:40] Copying files from 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa\Current' to 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa\8.1.375.2' [09:45:41] Getting all Exchange 2007 OWA virtual directories [09:45:42] Found 1 OWA virtual directories. [09:45:42] Updating OWA virtual directories [09:45:42] Processing virtual directory with metabase path 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa'. [09:45:42] Metabase entry 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2' exists. Removing it. [09:45:42] Creating metabase entry IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2. [09:45:42] Configuring metabase entry 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2'. [09:45:43] Saving changes to 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2' [09:45:43] Saving changes to 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa'

  Read the article

• Durability of Websockets Server

  - by smitchell360

  I am starting to experiment with websockets. Does anyone know of a websockets server (open source or paid) that provides a durable store of the websocket "channel"? All of the examples that I have found do not address durability -- if a websockets server goes down, all "channel" data is lost. Services such as Pusher do not really discuss whether they address the durability issue (and I have not received a response from tech support yet). Happy to roll my own, but would rather not reinvent the wheel. EDIT: I'm not looking for websockets 101 information. That is readily available and understood. I'm looking for a server (open source or paid) that supports websockets and has a durable store for the websocket data so that, in the event that a server fails, a new server can take over where the original one left off. Two main purposes: 1. support failover scenarios contemplated by the websockets Network Working Group http://tools.ietf.org/html/draft-ibc-websocket-dns-srv-02#section-5.1 (most importantly so that missed messages are sent when a client connects to a failover server) 2. support scenarios where new subscribers must receive all past messages that were published. Of course this can be handled at the application layer...but that is not what I am looking for.

  Read the article

• Need to Remove Exchange 2003 Server That Crashed During Transition to 2010

  - by ThaKidd

  As the title stated, we were running an Exchange 2003 server that we knew was going down soon so we purchased a second server and installed Exchange 2010 into the AD. We managed to move all of the mailboxes off of 2003 and also managed to get the Offline Address Book setup on 2010. At this point the 2003 server bit the dust and will no longer boot. Therefore we were unable to properly uninstall Exchange and remove the last 2003 server so it still exists in AD. As far as the clients are concerned, everything is working properly. However, when I run the Microsoft Exchange Profile Analyzer, I still see the old server and its Administrative Group. I am going to guess that since the old server is showing up in AD, I will not be able to raise Exchange or AD functionality (as the 2003 server was also the only AD DC) levels. I have forced the 2003 DC out of AD so that is no longer an issue. Old Setup: Windows 2003 Server Enterprise & Exchange 2003 Standard New Setup: Windows 2010 Server Enterprise & Exchange 2010 Standard Two Questions: How do you go about manually forcing the 2003 server and its administrative group out of AD? When that is finished, where do you raise the Exchange mode (can't find this for the life of me)?

  Read the article

• postfix is unable to send emails to external domains

  - by BoCode

  Whenever i try to send an email from my server, i get the following error: Nov 13 06:37:21 xyz postfix/smtpd[6730]:connect from unknown[a.b.c.d] Nov 13 06:37:21 xyz postfix/smtp[6729]: warning: host X.com[x.y.z.d]:25 greeted me with my own hostname xyz.biz Nov 13 06:37:21 xyz postfix/smtp[6729]: warning: host X.com[x.y.z.d]:25 replied to HELO/EHLO with my own hostname xyz.biz Nov 13 06:37:21 xyz postfix/smtp[6729]: 2017F1B00C54: to=<[email protected]>, relay=X.com[x.y.z.d]:25, delay=0.98, delays=0.17/0/0.81/0, dsn=5.4.6, status=bounced (mail for X.com loops back to myself) this is the output of postconf -n: address_verify_poll_delay = 1s alias_database = hash:/etc/aliases alias_maps = body_checks_size_limit = 40980000 command_directory = /usr/sbin config_directory = /etc/postfix connection_cache_ttl_limit = 300000s daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 1 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 default_delivery_slot_cost = 2 default_destination_concurrency_limit = 10 default_destination_recipient_limit = 1 default_minimum_delivery_slots = 3 default_process_limit = 10000 default_recipient_refill_delay = 1s default_recipient_refill_limit = 10 disable_dns_lookups = yes enable_original_recipient = no hash_queue_depth = 2 home_mailbox = Maildir/ html_directory = no in_flow_delay = 0 inet_interfaces = all inet_protocols = ipv4 initial_destination_concurrency = 100 local_header_rewrite_clients = mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man master_service_disable = milter_default_action = accept milter_protocol = 6 mydestination = $myhostname, localhost.localdomain, localhost, $mydomain mydomain = xyz.biz myhostname = xyz.biz mynetworks = 168.100.189.0/28, 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases non_smtpd_milters = $smtpd_milters qmgr_message_active_limit = 500 qmgr_message_recipient_limit = 500 qmgr_message_recipient_minimum = 1 queue_directory = /var/spool/postfix queue_run_delay = 300s readme_directory = /usr/share/doc/postfix.20.10.2/README_FILE receive_override_options = no_header_body_checks sample_directory = /usr/share/doc/postfix.2.10.2/examples sendmail_path = /usr/sbin/sendmail service_throttle_time = 1s setgid_group = postdrop smtp_always_send_ehlo = no smtp_connect_timeout = 1s smtp_connection_cache_time_limit = 30000s smtp_connection_reuse_time_limit = 30000s smtp_delivery_slot_cost = 2 smtp_destination_concurrency_limit = 10000 smtp_destination_rate_delay = 0s smtp_destination_recipient_limit = 1 smtp_minimum_delivery_slots = 1 smtp_recipient_refill_delay = 1s smtp_recipient_refill_limit = 1000 smtpd_client_connection_count_limit = 200 smtpd_client_connection_rate_limit = 0 smtpd_client_message_rate_limit = 100000 smtpd_client_new_tls_session_rate_limit = 0 smtpd_client_recipient_rate_limit = 0 smtpd_delay_open_until_valid_rcpt = no smtpd_delay_reject = no smtpd_discard_ehlo_keywords = silent-discard, dsn smtpd_milters = inet:127.0.0.1:8891 smtpd_peername_lookup = no unknown_local_recipient_reject_code = 550 what could be the issue?

  Read the article

• Database problem with MS JET

  - by Zimmy-DUB-Zongy-Zong-DUBBY

  I am migrating a bunch of sites which each use an Access database (or whatever an MDB file is). If I try to load the site, I get the following error: Microsoft OLE DB Provider for SQL Server error '80004005' [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied If I rename the MDB file, I get a complaint that the file does not exist, which makes sense. If the file is named correctly, the site tries to load for about 30 seconds or so, and then just fails with the above message. During this waiting period, I can see a lock file being created (and then at some point removed). The MDB file and it's parent dir have full permissions granted to all users. Given that the lock file is successfully created and removed, I don't think that this is a "real" permission issue. The OS is Windows Server 2003 SP2. I am not sure about much more detail on it's config wrt Access databases. I also don't know what version it is expected to be. VB code in question: set oConn=server.createobject("adodb.connection") DSNtemp="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\fullPathGoesHere\db\sitedb.mdb" oConn.Open DSNtemp

  Read the article

• OSX: sync Documents folder to Dropbox with version control

  - by James Porter

  I have ample storage in Dropbox to sync my entire OSX Documents folder, and I'd like to this just so that I have it anywhere I go. I found this question, which describes a method for doing this with symlinks. Seems good, the only problem is that it would be nice also to have everything under version control. I thought perhaps a better solution would be to set up my Documents folder as a git repo with a remote that I would push to in my Dropbox folder. Alternatively, just set up Documents as a git repo with no remote and then symlink it to Dropbox. Which of these two alternatives is preferable? What are some pitfalls I might not be thinking of with each? It also has occurred to me that some of the subdirectories of Documents are themselves git repos with github remotes. Would it cause problems for these subdirectories if I made Documents a git repo? If so, how do I get around this? Would making Documents an svn repo instead help? Is there a way to set up git so that this is not an issue?

  Read the article

• How can I fix video tearing and pausing on Windows XP Flash videos?

  - by xvs

  I have what should be a reasonably fast PC: it's a Quadcore Intel 6600 at 2.4 GHz, 4MB of RAM, an ATI 3800 series video card and an LG L246WP monitor, which I selected particularly because it was supposed to work well with video and have no trails or other artifacts. So I should be able to play video with no problems. And I can, as long as that video isn't Flash video. With Flash, what I see is tearing, especially during pans, and pausing -- every few seconds the video pauses for about 300ms while the sound stays continuous. I tried going into the video card setup and changing vertical sync, pulldown detection, windows media video acceleration, deinterlacing and triple buffering. but no combination of settings I've tried has changed or corrected the problem in any way. I've also tried enabling and disabling hardware acceleration in the Flash settings, to no avail. This problem happens whether or not the video is streaming or has fully streamed in before playing. So, what can I do? Is this just a flash issue or is there a way to get it to work?

  Read the article

• Add IPv6 support to DirectAdmin server

  - by George Boot

  I just set up an new DirectAdmin, and I want to prepare it for IPv6 use. My ISP have gave me an range of IPv6 addresses that I can use. Lets say that address is 2a01:7c8:**:1f::. My neworkadapter user DHCP to resolves its IP-addresses. When i type ifoncig eth0 I get the following result: eth0 Link encap:Ethernet HWaddr 52:**:**:**:ce:f3 inet addr:37.**.**.44 Bcast:37.**.**.255 Mask:255.255.255.0 inet6 addr: 2a01:7c8:****:1f::/64 Scope:Global inet6 addr: fe80::5054:ff:fe87:cef3/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38941 errors:0 dropped:0 overruns:0 frame:0 TX packets:29439 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3779534 (3.6 MiB) TX bytes:5089379 (4.8 MiB) As you can see, I have an IPv6 address set, but I can't ping6 an IPv6 host. I get the error: connect: Network is unreachable. I decided that I needed an gateway, so I tryed to add one: ip -6 route add default via 2a01:7c8:****::1 dev eth0 (2a01:7c8:**::1 is the gateway of my ISP). But it trows an error: RTNETLINK answers: No route to host. Does somebody know what to do, and how to solve this issue? Thanks a lot!

  Read the article

< Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >