Search Results

Search found 19308 results on 773 pages for 'network efficiency'.

Page 740/773 | < Previous Page | 736 737 738 739 740 741 742 743 744 745 746 747  | Next Page >

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• Oracle’s Web Experience Management

  - by Christie Flanagan

  Today’s guest post on Oracle’s Web Experience Management comes from a member of our WebCenter Evangelist team, Noël Jaffré, a Principal Technologist based in France.Oracle’s Web Experience Management (WEM) solution enables organizations to optimize the online channel for driving marketing and customer experience management success. It empowers business users to manage the web presence and create rich and engaging online experiences for customers and prospects. Oracle's WEM platform provides a framework to simplify the integration of Oracle, third-party and custom-built applications. This framework essentially allows the creation and integration of applications using one single business interface called the WEM interface. It includes the following: Single sign-on access control for all integrated applications using the Central Authentication Service (CAS) component. A single centralized administration window for user, role, and native applications management including site management. Community server management, gadget server management as well as management for partner integrated technologies. A Representational State Transfer (REST) API for accessing WebCenter Sites data. REST services are supported on both Oracle WebCenter Sites and Oracle WebCenter Sites Satellite Server to leverage the satellite server cache. All REST requests are cached for web consuming applications as well for the high performance delivery of native applications on the mobile channel. Oracle WebCenter Sites’ Web Experience Management environment enables organizations to deliver a compelling online experience to customers by simplifying the deployment and management of sophisticated and engaging websites. The WebCenter Sites platform automates the entire process of managing web content including: Authoring:  Business users can easily contribute and manage web content in real-time, with intuitive interfaces and drag-and-drop content authoring and layout capabilities designed for the non-technical user. Contextual Content Targeting: Marketers are empowered to create and manage targeted campaigns with relevant recommendations and promotions based on the context of the session of the visitor such as his or her navigation history, user profile, language, location or other information shared during the visitor session. Content Publishing and Deployment: It offers advanced multi-site management capabilities for departmental or regional sites, as well as strong multi-lingual and multi-locale content management. The remote satellite server caching infrastructure provides high-performance, distributed caching, tuned to deliver high-volume, targeted and multi-lingual sites. Analytics and Optimization: Business users and marketers have the ability to measure the effectiveness of their online content and campaigns at a granular level. Editors and marketers can immediately determine whether a given article or promotion is relevant to a particular customer segment. User-generated Content: Marketers can enable blogs, comments, rating and reviews on the website.  All comments and reviews posted to the website can be moderated from the administrator interface either manually or automatically using filters, whitelists, blacklists or community based moderation. Personalized Gadget Dashboards:  Site managers can deploy gadgets, small applications using web content, individually or as part of dashboards containing multiple gadgets.  These gadget dashboards enable site visitors to create their own “MyPage” on a given site where they can select and customize the gadgets that the site administrator has made available.  Any gadget that conforms to the iGoogle/OpenSocial standard can be made available to site visitors, or they can be created within the WEM interface. Oracle's WEM platform also provides a unique environment for the delivery of a rich, multichannel online experience for site visitors through its advanced management modules for mobile. With Oracle’s WEM solution, it’s easy to control branding and deliver a consistent message while repurposing web content for publication to mobile devices, kiosks and much more. This distinctive approach provides: HTML5 Delivery: HTML5 delivery which includes native support for adaptive design that responds to the user’s computer screen resolution and orientation. The approach is less driven by the particular hardware and more driven by the user’s interactions with the device. In other words, this approach takes both the screen interactions (either cursor or touch) and screen sizes and orientation into consideration. A Unique Native Mobile Extension Environment for Contributors: From the WEM interface, a contributor can directly manage their mobile channel, using the tooling already in place for driving the traditional web presence. This includes the mobile presentation, as well as mobile insite editing, drag and drop page layout, and in-context recommendations and personalization. Optimized REST APIs for High Performance Content Delivery on Native Mobile Device Applications: WebCenter Sites’ REST API uses the underlying HTTP methods (GET, POST, PUT, DELETE) to interact with resources. Resources support two types of input and output formats -- XML and JSON. REST calls are customizable to optimize the interactions between the content repositories and the client applications. Caching is essential to decrease network loads and improve overall reliability and usability of the applications and user interactions. REST results are cached through the highly efficient Oracle WebCenter Sites caching architecture.

  Read the article

• Meet our 2009 Oracle Graduates in South Africa

  - by anca.rosu

  Focusing on the broader Oracle community, Oracle South Africa initiated its first skills development programme in May 1988. Since its inception the programme has developed and improved and every year more graduates are taken on board. The Oracle Graduate Programme is made up of specific learning paths designed around customer, partner and Oracle specifications and is structured to meet the urgent skills requirements in the Oracle “economy”. The training programmes have a specific duration and incorporate both theoretical and practical application of Oracle product sets. It is aimed at creating: Meaningful employment for graduates; Learning opportunities for individuals within the organization so that career growth opportunities are exploited to the fullest; Capacity building for small enterprises which is aligned to Oracle’s Enterprise Development Programme Meet our five graduates who joined us in December 2008 and have spent over a year with us! Let’s get their initial feedback on the graduate programme and on their assignment to Jordan. Lector   On the Oracle Graduate Programme: “The Oracle Graduate Programme is an experience of a life time. I would not trade it for anything. It’s challenging and rewarding. I am proud and happy to be in an organization like Oracle” On the assignment in Jordan: "Friendly, welcoming people, world class instructors always willing to go the extra mile. What more can you ask for?"   Lungile On the Oracle Graduate Programme: “I joined Oracle as part of the graduate intake for pre-sales in order to develop my skills and knowledge. Working at Oracle has been an overwhelmingly positive experience as it has encouraged me to progress with my personal development. I am hugely grateful. It has been a great challenge and an awesome opportunity.” On the assignment to Jordan: “Going to Jordan was a great opportunity and the experience of a lifetime. The people were very welcoming and friendly. The culture was totally different from ours - the food, the clothes and the weather. It was an amazingly different experience to work from Sunday to Thursday with Friday and Saturday as the weekend.” Thabo On the Oracle Graduate Programme: “Life is an infinite learning path. I truly value growth. I believe for one to grow, one needs to be challenged to your full potential. The Oracle Graduate Programme offers real growth – and so much more.” On the assignment to Jordan: “I was amazed by the cultural differences. I now understood that to be part of the global community, I must embrace our similarities and understand our differences.”   Albeauty On the Oracle Graduate Programme: “Responsibility, dedication, focus and taking initiative … these are the key points I learned from Oracle. It is such an honour to finally be part of the Oracle family. The graduate programme itself was a great experience as I managed to learn how Oracle operates – it has been the highlight of my year. I believe that my hard work will assist in the growth of the company.” On the Jordan assignment: “A memory worth embracing. Going to Jordan was a great opportunity as I learned a lot with respect to integration between different cultures and getting to adapt to all things different. I, along with almost every other graduate, discovered that Oracle is far more than a database company. Now I know there is far more to the ‘Big Red’ name.” Emmanuel On the Oracle Graduate Programme: “The programme gave me invaluable exposure to the ICT sector and also provided an opportunity to travel, network and exchange ideas with others. The formal training helped me to improve my presentation skills and gave me a better understanding of business etiquette and communication.” On the assignment to Jordan: “It was my first trip abroad. It was a great chance to get to know each other. I had the opportunity to share ideas, share personal stuff as a team. We met experts who gave us superb training in Oracle Technologies. It was great.”   If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com.   Technorati Tags: Oracle community,South Africa,Graduate Programme,Jordan,Technologies

  Read the article

• 3 Ways to Make Steam Even Faster

  - by Chris Hoffman

  Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

  Read the article

• DBCC CHECKDB (BatmanDb, REPAIR_ALLOW_DATA_LOSS) &ndash; Are you Feeling Lucky?

  - by David Totzke

  I’m currently working for a client on a PowerBuilder to WPF migration.  It’s one of those “I could tell you, but I’d have to kill you” kind of clients and the quick-lime pits are currently occupied by the EMC tech…but I’ve said too much already. At approximately 3 or 4 pm that day users of the Batman[1] application here in Gotham[1] started to experience problems accessing the application.  Batman[2] is a document management system here that also integrates with the ERP system.  Very little goes on here that doesn’t involve Batman in some way.  The errors being received seemed to point to network issues (TCP protocol error, connection forcibly closed by the remote host etc…) but the real issue was much more insidious. Connecting to the database via SSMS and performing selects on certain tables underlying the application areas that were having problems started to reveal the issue.  You couldn’t do a SELECT * FROM MyTable without it bombing and giving the same error noted above.  A run of DBCC CHECKDB revealed 14 tables with corruption.  One of the tables with issues was the Document table.  Pretty central to a “document management” system.  Information was obtained from IT that a single drive in the SAN went bad in the night.  A new drive was in place and was working fine.  The partition that held the Batman database is configured for RAID Level 5 so a single drive failure shouldn’t have caused any trouble and yet, the database is corrupted.  They do hourly incremental backups here so the first thing done was to try a restore.  A restore of the most recent backup failed so they worked backwards until they hit a good point.  This successful restore was for a backup at 3AM – a full day behind.  This time also roughly corresponds with the time the SAN started to report the drive failure.  The plot thickens… I got my hands on the output from DBCC CHECKDB and noticed a pattern.  What’s sad is that nobody that should have noticed the pattern in the DBCC output did notice.  There was a rush to do things to try and recover the data before anybody really understood what was wrong with it in the first place.  Cooler heads must prevail in these circumstances and some investigation should be done and a plan of action laid out or you could end up making things worse[3].  DBCC CHECKDB also told us that: repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB Yikes.  That means that the database is so messed up that you’re definitely going to lose some stuff when you repair it to get it back to a consistent state.  All the more reason to do a little more investigation into the problem.  Rescuing this database is preferable to having to export all of the data possible from this database into a new one.  This is a fifteen year old application with about seven hundred tables.  There are TRIGGERS everywhere not to mention the referential integrity constraints to deal with.  Only fourteen of the tables have an issue.  We have a good backup that is missing the last 24 hours of business which means we could have a “do-over” of yesterday but that’s not a very palatable option either. All of the affected tables had TEXT columns and all of the errors were about LOB data types and orphaned off-row data which basically means TEXT, IMAGE or NTEXT columns.  If we did a SELECT on an affected table and excluded those columns, we got all of the rows.  We exported that data into a separate database.  Things are looking up.  Working on a copy of the production database we then ran DBCC CHECKDB with REPAIR_ALLOW_DATA_LOSS and that “fixed” everything up.   The allow data loss option will delete the bad rows.  This isn’t too horrible as we have all of those rows minus the text fields from out earlier export.  Now I could LEFT JOIN to the exported data to find the missing rows and INSERT them minus the TEXT column data. We had the restored data from the good 3AM backup that we could now JOIN to and, with fingers crossed, recover the missing TEXT column information.  We got lucky in that all of the affected rows were old and in the end we didn’t lose anything.  :O  All of the row counts along the way worked out and it looks like we dodged a major bullet here. We’ve heard back from EMC and it turns out the SAN firmware that they were running here is apparently buggy.  This thing is only a couple of months old.  Grrr…. They dispatched a technician that night to come and update it .  That explains why RAID didn’t save us. All-in-all this could have been a lot worse.  Given the root cause here, they basically won the lottery in not losing anything. Here are a few links to some helpful posts on the SQL Server Engine blog.  I love the title of the first one: Which part of 'REPAIR_ALLOW_DATA_LOSS' isn't clear? CHECKDB (Part 8): Can repair fix everything? (in fact, read the whole series) Ta da! Emergency mode repair (we didn’t have to resort to this one thank goodness)   Dave Just because I can…   [1] Names have been changed to protect the guilty. [2] I'm Batman. [3] And if I'm the coolest head in the room, you've got even bigger problems...

  Read the article

• Find the best OpenWorld sessions for learning about UX highlights

  - by mvaughan

  By Kathy Miedema, Oracle Applications User Experience  Have you clicked through the Oracle OpenWorld 2012 catalog? It’s amazingly dense, as usual. But one thing we noticed this year is that nearly half of the sessions mention some component of user experience, which is a sea change in our world. It means that more people understand, appreciate, and desire an effective user experience, and it also means that Oracle’s investment in its next-generation applications user experience, such as Oracle Fusion Applications, is increasingly apparent and interesting to its customers. So how do you choose the user experience sessions that make the most sense for you and your organization? Read our list to find out which sessions we think offer the most value for those interested in finding out more about the Oracle Applications user experience. If you’re interested in Oracle’s strategy for its user experience: CON9438: Oracle Fusion Applications: Transforming Insight into Action10:15 - 11:15 a.m. Tuesday, Oct. 2; Moscone West – 2007 CON9467: Oracle’s Roadmap to a Simple, Modern User Experience3:30 - 4:30 p.m. Wednesday, Oct. 3; Moscone West - 3002/3004 CON8718: Oracle Fusion Applications: Customizing and Extending with Oracle Composers11:15 a.m. - 12:15 p.m. Thursday, Oct. 4; Moscone West – 2008 GEN9663: General Session: A Panel of Masterminds—Where Are Oracle Applications Headed?1:45 - 2:45 p.m. Monday, Oct. 1; Moscone North - Hall D If you’re interested in PeopleSoft/PeopleTools: GEN8928: General Session: PeopleSoft Update and Product Roadmap3:15 - 4:15 p.m. Monday, Oct. 1; Moscone West - 3002/3004 CON9183: PeopleSoft PeopleTools Technology Roadmap4:45 - 5:45 p.m. Monday, Oct. 1; Moscone West - 3002/3004 CON8932: New Functional PeopleSoft PeopleTools Capabilities for the Line-of-Business User5:00 - 6:00 p.m. Tuesday, Oct. 2; Moscone West – 3007 If you’re interested in E-Business Suite: GEN8474: General Session: Oracle E-Business Suite—Strategy, Update, and Roadmap12:15 - 1:15 p.m. Monday, Oct. 1; Moscone West - 2002/2004 CON9026: Latest Oracle E-Business Suite 12.1 User Interface and Usability Enhancements1:15 - 2:15 p.m. Tuesday, Oct. 2; Moscone West – 2016 If you’re interested in Siebel: CON9700: Siebel CRM Overview, Strategy, and Roadmap12:15 - 1:15 p.m. Monday, Oct. 1; Moscone West – 2009 CON9703: User Interface Innovations with the New Siebel “Open UI”10:15 - 11:15 a.m. Tuesday, Oct. 2; Moscone West – 2009 If you’re interested in JD Edwards EnterpriseOne: HOL10452: JD Edwards EnterpriseOne 9.1 User Interface Changes10:15 - 11:15 a.m. Wednesday, Oct. 3; Marriott Marquis - Nob Hill AB CON9160: Showcase of the JD Edwards EnterpriseOne User Experience1:15 - 2:15 p.m. Wednesday, Oct. 3; InterContinental - Grand Ballroom B CON9159: Euphoria with the JD Edwards EnterpriseOne User Experience11:45 a.m. - 12:45 p.m. Wednesday, Oct. 3; InterContinental - Grand Ballroom B If you’re interested in Oracle Fusion Applications user experience design patterns: Functional design patterns that helped create the Oracle Fusion Applications user experience are now available. Learn more about these new, reusable usability solutions and best-practices at the Oracle JDeveloper and Oracle ADF demopods during Oracle OpenWorld 2012. Or visit the OTN Lounge between 4:30 p.m. and 6 p.m. on Wednesday, Oct. 3, to talk to Ultan O'Broin from the Oracle Applications User Experience team.    Demopod location: Moscone Center, South Exhibition Hall Level 1, S-207 OTN (Oracle Technology Network) Lounge: Howard Street tent On the demogrounds: Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located.Photo by Martin Taylor, Oracle Applications User ExperienceA tour takes place in one of the usability labs at Oracle’s headquarters in Redwood Shores, Calif. At our labs, on-site and at HQ: We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. For more information on any OpenWorld sessions, check the content catalog, also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page.

  Read the article

• Is Linear Tape File System (LTFS) Best For Transportable Storage?

  - by rickramsey

  Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

  Read the article

• Using Hadooop (HDInsight) with Microsoft - Two (OK, Three) Options

  - by BuckWoody

  Microsoft has many tools for “Big Data”. In fact, you need many tools – there’s no product called “Big Data Solution” in a shrink-wrapped box – if you find one, you probably shouldn’t buy it. It’s tempting to want a single tool that handles everything in a problem domain, but with large, complex data, that isn’t a reality. You’ll mix and match several systems, open and closed source, to solve a given problem. But there are tools that help with handling data at large, complex scales. Normally the best way to do this is to break up the data into parts, and then put the calculation engines for that chunk of data right on the node where the data is stored. These systems are in a family called “Distributed File and Compute”. Microsoft has a couple of these, including the High Performance Computing edition of Windows Server. Recently we partnered with Hortonworks to bring the Apache Foundation’s release of Hadoop to Windows. And as it turns out, there are actually two (technically three) ways you can use it. (There’s a more detailed set of information here: http://www.microsoft.com/sqlserver/en/us/solutions-technologies/business-intelligence/big-data.aspx, I’ll cover the options at a general level below)  First Option: Windows Azure HDInsight Service  Your first option is that you can simply log on to a Hadoop control node and begin to run Pig or Hive statements against data that you have stored in Windows Azure. There’s nothing to set up (although you can configure things where needed), and you can send the commands, get the output of the job(s), and stop using the service when you are done – and repeat the process later if you wish. (There are also connectors to run jobs from Microsoft Excel, but that’s another post)   This option is useful when you have a periodic burst of work for a Hadoop workload, or the data collection has been happening into Windows Azure storage anyway. That might be from a web application, the logs from a web application, telemetrics (remote sensor input), and other modes of constant collection.   You can read more about this option here:  http://blogs.msdn.com/b/windowsazure/archive/2012/10/24/getting-started-with-windows-azure-hdinsight-service.aspx Second Option: Microsoft HDInsight Server Your second option is to use the Hadoop Distribution for on-premises Windows called Microsoft HDInsight Server. You set up the Name Node(s), Job Tracker(s), and Data Node(s), among other components, and you have control over the entire ecostructure.   This option is useful if you want to  have complete control over the system, leave it running all the time, or you have a huge quantity of data that you have to bulk-load constantly – something that isn’t going to be practical with a network transfer or disk-mailing scheme. You can read more about this option here: http://www.microsoft.com/sqlserver/en/us/solutions-technologies/business-intelligence/big-data.aspx Third Option (unsupported): Installation on Windows Azure Virtual Machines  Although unsupported, you could simply use a Windows Azure Virtual Machine (we support both Windows and Linux servers) and install Hadoop yourself – it’s open-source, so there’s nothing preventing you from doing that.   Aside from being unsupported, there are other issues you’ll run into with this approach – primarily involving performance and the amount of configuration you’ll need to do to access the data nodes properly. But for a single-node installation (where all components run on one system) such as learning, demos, training and the like, this isn’t a bad option. Did I mention that’s unsupported? :) You can learn more about Windows Azure Virtual Machines here: http://www.windowsazure.com/en-us/home/scenarios/virtual-machines/ And more about Hadoop and the installation/configuration (on Linux) here: http://en.wikipedia.org/wiki/Apache_Hadoop And more about the HDInsight installation here: http://www.microsoft.com/web/gallery/install.aspx?appid=HDINSIGHT-PREVIEW Choosing the right option Since you have two or three routes you can go, the best thing to do is evaluate the need you have, and place the workload where it makes the most sense.  My suggestion is to install the HDInsight Server locally on a test system, and play around with it. Read up on the best ways to use Hadoop for a given workload, understand the parts, write a little Pig and Hive, and get your feet wet. Then sign up for a test account on HDInsight Service, and see how that leverages what you know. If you're a true tinkerer, go ahead and try the VM route as well. Oh - there’s another great reference on the Windows Azure HDInsight that just came out, here: http://blogs.msdn.com/b/brunoterkaly/archive/2012/11/16/hadoop-on-azure-introduction.aspx  

  Read the article

• Wednesday at OpenWorld: Identity Management

  - by Tanu Sood

  Divide and conquer! Yes, divide and conquer today at Oracle OpenWorld with your colleagues to make the most of all things Identity Management since there’s a lot going on. Here’ the line-up for today: Wednesday, October 3, 2012 CON9458: End End-User-Managed Passwords and Increase Security with Oracle Enterprise Single Sign-On Plus 10:15 a.m. – 11:15 a.m., Moscone West 3008 Most customers have a broad variety of applications (internal, external, web, client server, host etc) and single sign-on systems that extend to some, but not all systems. This session will focus on how customers are using enterprise single sign-on can help extend single sign-on to virtually any application, without costly application modification while laying a foundation that will enable integration with a broader identity management platform. CON9494: Sun2Oracle: Identity Management Platform Transformation 11:45 a.m. – 12:45 p.m., Moscone West 3008 Sun customers are actively defining strategies for how they will modernize their identity deployments. Learn how customers like Avea and SuperValu are leveraging their Sun investment, evaluating areas of expansion/improvement and building momentum. CON9631: Entitlement-centric Access to SOA and Cloud Services 11:45 a.m. – 12:45 p.m., Marriott Marquis, Salon 7 How do you enforce that a junior trader can submit 10 trades/day, with a total value of $5M, if market volatility is low? How can hide sensitive patient information from clerical workers but make it visible to specialists as long as consent has been given or there is an emergency? In this session, Uberether and HerbaLife take the stage with Oracle to demonstrate how you can enforce such entitlements on a service not just within your intranet but also right at the perimeter. CON3957 - Delivering Secure Wi-Fi on the Tube as an Olympics Legacy from London 2012 11:45 a.m. – 12:45 p.m., Moscone West 3003 In this session, Virgin Media, the U.K.’s first combined provider of broadband, TV, mobile, and home phone services, shares how it is providing free secure Wi-Fi services to the London Underground, using Oracle Virtual Directory and Oracle Entitlements Server, leveraging back-end legacy systems that were never designed to be externalized. As an Olympics 2012 legacy, the Oracle architecture will form a platform to be consumed by other Virgin Media services such as video on demand. CON9493: Identity Management and the Cloud 1:15 p.m. – 2:15 p.m., Moscone West 3008 Security is the number one barrier to cloud service adoption.  Not so for industry leading companies like SaskTel, ConAgra foods and UPMC. This session will explore how these organizations are using Oracle Identity with cloud services and how some are offering identity management as a cloud service. CON9624: Real-Time External Authorization for Middleware, Applications, and Databases 3:30 p.m. – 4:30 p.m., Moscone West 3008 As organizations seek to grant access to broader and more diverse user populations, the importance of centrally defined and applied authorization policies become critical; both to identify who has access to what and to improve the end user experience.  This session will explore how customers are using attribute and role-based access to achieve these goals. CON9625: Taking Control of WebCenter Security 5:00 p.m. – 6:00 p.m., Moscone West 3008 Many organizations are extending WebCenter in a business to business scenario requiring secure identification and authorization of business partners and their users. Leveraging LADWP’s use case, this session will focus on how customers are leveraging, securing and providing access control to Oracle WebCenter portal and mobile solutions. EVENTS: Identity Management Customer Advisory Board 2:30 p.m. – 3:30 p.m., Four Seasons – Yerba Buena Room This invitation-only event is designed exclusively for Customer Advisory Board (CAB) members to provide product strategy and roadmap updates. Identity Management Meet & Greet Networking Event 3:30 p.m. – 4:30 p.m., Meeting Session 4:30 p.m. – 5:30 p.m., Cocktail Reception Yerba Buena Room, Four Seasons Hotel, 757 Market Street, San Francisco The CAB meeting will be immediately followed by an open Meet & Greet event hosted by Oracle Identity Management executives and product management team. Do take this opportunity to network with your peers and connect with the Identity Management customers. For a complete listing, refer to the Focus on Identity Management document. And as always, you can find us on @oracleidm on twitter and FaceBook. Use #oow and #idm to join in the conversation.

  Read the article

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• SPARC T4-4 Delivers World Record First Result on PeopleSoft Combined Benchmark

  - by Brian

  Oracle's SPARC T4-4 servers running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved World Record 18,000 concurrent users while executing a PeopleSoft Payroll batch job of 500,000 employees in 43.32 minutes and maintaining online users response time at < 2 seconds. This world record is the first to run online and batch workloads concurrently. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 35% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. This is the first three tier mixed workload (online and batch) PeopleSoft benchmark also processing PeopleSoft payroll batch workload. Performance Landscape PeopleSoft HR Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-2 (db) 18,000 0.944 0.503 43.32 64 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory 5 x 300 GB SAS internal disks 1 x 100 GB and 2 x 300 GB internal SSDs 2 x 10 Gbe HBA Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 3 x 300 GB SAS internal disks Oracle Solaris 11 11/11 Oracle Database 11g Release 2 Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 2 x 300 GB SAS internal disks 1 x 100 GB internal SSD Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two Oracle PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Management oracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle's PeopleSoft HR and Payroll combined benchmark, www.oracle.com/us/solutions/benchmark/apps-benchmark/peoplesoft-167486.html, results 09/30/2012.

  Read the article

• Visual Studio Load Testing using Windows Azure

  - by Tarun Arora

  In my opinion the biggest adoption barrier in performance testing on smaller projects is not the tooling but the high infrastructure and administration cost that comes with this phase of testing. Only if a reusable solution was possible and infrastructure management wasn’t as expensive, adoption would certainly spike. It certainly is possible if you bring Visual Studio and Windows Azure into the equation. It is possible to run your test rig in the cloud without getting tangled in SCVMM or Lab Management. All you need is an active Azure subscription, Windows Azure endpoint enabled developer workstation running visual studio ultimate on premise, windows azure endpoint enabled worker roles on azure compute instances set up to run as test controllers and test agents. My test rig is running SQL server 2012 and Visual Studio 2012 RC agents. The beauty is that the solution is reusable, you can open the azure project, change the subscription and certificate, click publish and *BOOM* in less than 15 minutes you could have your own test rig running in the cloud. In this blog post I intend to show you how you can use the power of Windows Azure to effectively abstract the administration cost of infrastructure management and lower the total cost of Load & Performance Testing. As a bonus, I will share a reusable solution that you can use to automate test rig creation for both VS 2010 agents as well as VS 2012 agents. Introduction The slide show below should help you under the high level details of what we are trying to achive... Leveraging Azure for Performance Testing View more PowerPoint from Avanade Scenario 1 – Running a Test Rig in Windows Azure To start off with the basics, in the first scenario I plan to discuss how to, - Automate deployment & configuration of Windows Azure Worker Roles for Test Controller and Test Agent - Automate deployment & configuration of SQL database on Test Controller on the Test Controller Worker Role - Scaling Test Agents on demand - Creating a Web Performance Test and a simple Load Test - Managing Test Controllers right from Visual Studio on Premise Developer Workstation - Viewing results of the Load Test - Cleaning up - Have the above work in the shape of a reusable solution for both VS2010 and VS2012 Test Rig Scenario 2 – The scaled out Test Rig and sharing data using SQL Azure A scaled out version of this implementation would involve running multiple test rigs running in the cloud, in this scenario I will show you how to sync the load test database from these distributed test rigs into one SQL Azure database using Azure sync. The selling point for this scenario is being able to collate the load test efforts from across the organization into one data store. - Deploy multiple test rigs using the reusable solution from scenario 1 - Set up and configure Windows Azure Sync - Test SQL Azure Load Test result database created as a result of Windows Azure Sync - Cleaning up - Have the above work in the shape of a reusable solution for both VS2010 and VS2012 Test Rig The Ingredients Though with an active MSDN ultimate subscription you would already have access to everything and more, you will essentially need the below to try out the scenarios, 1. Windows Azure Subscription 2. Windows Azure Storage – Blob Storage 3. Windows Azure Compute – Worker Role 4. SQL Azure Database 5. SQL Data Sync 6. Windows Azure Connect – End points 7. SQL 2012 Express or SQL 2008 R2 Express 8. Visual Studio All Agents 2012 or Visual Studio All Agents 2010 9. A developer workstation set up with Visual Studio 2012 – Ultimate or Visual Studio 2010 – Ultimate 10. Visual Studio Load Test Unlimited Virtual User Pack. Walkthrough To set up the test rig in the cloud, the test controller, test agent and SQL express installers need to be available when the worker role set up starts, the easiest and most efficient way is to pre upload the required software into Windows Azure Blob storage. SQL express, test controller and test agent expose various switches which we can take advantage of including the quiet install switch. Once all the 3 have been installed the test controller needs to be registered with the test agents and the SQL database needs to be associated to the test controller. By enabling Windows Azure connect on the machines in the cloud and the developer workstation on premise we successfully create a virtual network amongst the machines enabling 2 way communication. All of the above can be done programmatically, let’s see step by step how… Scenario 1 Video Walkthrough–Leveraging Windows Azure for performance Testing Scenario 2 Work in progress, watch this space for more… Solution If you are still reading and are interested in the solution, drop me an email with your windows live id. I’ll add you to my TFS preview project which has a re-usable solution for both VS 2010 and VS 2012 test rigs as well as guidance and demo performance tests.   Conclusion Other posts and resources available here. Possibilities…. Endless!

  Read the article

• Searching for the Perfect Developer&rsquo;s Laptop.

  - by mbcrump

  I have been in the market for a new computer for several months. I set out with a budget of around $1200. I knew up front that the machine would be used for developing applications and maybe some light gaming. I kept switching between buying a laptop or a desktop but the laptop won because: With a Laptop, I can carry it everywhere and with a desktop I can’t. I searched for about 2 weeks and narrowed it down to a list of must-have’s : i7 Processor (I wasn’t going to settle for an i5 or AMD. I wanted a true Quad-core machine, not 2 dual-core fused together). 15.6” monitor SSD 128GB or Larger. – It’s almost 2011 and I don’t want an old standard HDD in this machine. 8GB of DDR3 Ram. – The more the better, right? 1GB Video Card (Prefer NVidia) – I might want to play games with this. HDMI Port – Almost a standard on new Machines. This would be used when I am on the road and want to stream Netflix to the HDTV in the Hotel room. Webcam Built-in – This would be to video chat with the wife and kids if I am on the road. 6-Cell Battery. – I’ve read that an i7 in a laptop really kills the battery. A 6-cell or 9-cell is even better. That is a pretty long list for a budget of around $1200. I searched around the internet and could not buy this machine prebuilt for under $1200. That was even with coupons and my company’s 10% Dell discount. The only way that I would get a machine like this was to buy a prebuilt and replace parts. I chose the  Lenovo Y560 on Newegg to start as my base. Below is a top-down picture of it.   Part 1: The Hardware The Specs for this machine: Color :  GrayOperating System : Windows 7 Home Premium 64-bitCPU Type : Intel Core i7-740QM(1.73GHz)Screen : 15.6" WXGAMemory Size : 4GB DDR3Hard Disk : 500GBOptical Drive : DVD±R/RWGraphics Card : ATI Mobility Radeon HD 5730Video Memory : 1GBCommunication : Gigabit LAN and WLANCard slot : 1 x Express Card/34Battery Life : Up to 3.5 hoursDimensions : 15.20" x 10.00" x 0.80" - 1.30"Weight : 5.95 lbs. This computer met most of the requirements above except that it didn’t come with an SSD or have 8GB of DDR3 Memory. So, I needed to start shopping except this time for an SSD. I asked around on twitter and other hardware forums and everyone pointed me to the Crucial C300 SSD. After checking prices of the drive, it was going to cost an extra $275 bucks and I was going from a spacious 500GB drive to 128GB. After watching some of the SSD videos on YouTube I started feeling better. Below is a pic of the Crucial C300 SSD. The second thing that I needed to upgrade was the RAM. It came with 4GB of DDR3 RAM, but it was slow. I decided to buy the Crucial 8GB (4GB x 2) Kit from Newegg. This RAM cost an extra $120 and had a CAS Latency of 7. In the end this machine delivered everything that I wanted and it cost around $1300. You are probably saying, well your budget was $1200. I have spare parts that I’m planning on selling on eBay or Anandtech.  =) If you are interested then shoot me an email and I will give you a great deal mbcrump[at]gmail[dot]com. 500GB Laptop 7200RPM HDD 4GB of DDR3 RAM (2GB x 2) faceVision HD 720p Camera – Unopened In the end my Windows Experience Rating of the SSD was 7.7 and the CPU 7.1. The max that you can get is a 7.9. Part 2: The Software I’m very lucky that I get a lot of software for free. When choosing a laptop, the OS really doesn’t matter because I would never keep the bloatware pre-installed or Windows 7 Home Premium on my main development machine. Matter of fact, as soon as I got the laptop, I immediately took out the old HDD without booting into it. After I got the SSD into the machine, I installed Windows 7 Ultimate 64-Bit. The BIOS was out of date, so I updated that to the latest version and started downloading drivers off of Lenovo’s site. I had to download the Wireless Networking Drivers to a USB-Key before I could get my machine on my wireless network. I also discovered that if the date on your computer is off then you cannot join the Windows 7 Homegroup until you fix it. I’m aware that most people like peeking into what programs other software developers use and I went ahead and listed my “essentials” of a fresh build. I am a big Silverlight guy, so naturally some of the software listed below is specific to Silverlight. You should also check out my master list of Tools and Utilities for the .NET Developer. See a killer app that I’m missing? Feel free to leave it in the comments below. My Software Essential List. CPU-Z Dropbox Everything Search Tool Expression Encoder Update Expression Studio 4 Ultimate Foxit Reader Google Chrome Infragistics NetAdvantage Ultimate Edition Keepass Microsoft Office Professional Plus 2010 Microsoft Security Essentials 2  Mindscape Silverlight Elements Notepad 2 (with shell extension) Precode Code Snippet Manager RealVNC Reflector ReSharper v5.1.1753.4 Silverlight 4 Toolkit Silverlight Spy Snagit 10 SyncFusion Reporting Controls for Silverlight Telerik Silverlight RadControls TweetDeck Virtual Clone Drive Visual Studio 2010 Feature Pack 2 Visual Studio 2010 Ultimate VS KB2403277 Update to get Feature Pack 2 to work. Windows 7 Ultimate 64-Bit Windows Live Essentials 2011 Windows Live Writer Backup. Windows Phone Development Tools That is pretty much it, I have a new laptop and am happy with the purchase. If you have any questions then feel free to leave a comment below.  Subscribe to my feed

  Read the article

• In the Mobile and Tablet World, How Much is Too Much?

  - by andrewbrust

  The week of April 26th was a huge one in the world of mobile and tablet devices,  There were so many individual developments, announcements and solidifications of strategy, it’s almost impossible to believe they occurred in the same month, let alone the same week. Things started with Apple and Gizmodo having a Law and Order moment over the latter’s procurement of what appears to be the former’s 4th gen iPhone prototype.  We found out on the 26th that Gizmodo blogger Jason Chen’s apartment was raided by police and, honestly, that was a bit much. But Apple didn’t stop there.  They also published Steve Job’s critique of Adobe Flash and his explanation of Cupertino’s embargo of Flash on iPhones, iPods and iPads.  If you ask me, this too, was a bit much. Apple finished up the week by releasing the 3G version of its iPad product to the US market. I like (iLike?) my WiFi iPad.  The idea of getting a version of it that required a second 3G service monthly subscription, is, well, a bit  much. Microsoft was in the news too.  It killed a project it hadn’t even acknowledged the existence of: the Courier tablet.  That’s a bit much too.  If a tree falls in the woods, and Microsoft says they can’t hear it anyway, could they really have chopped it down? Maybe Microsoft Research should have licensed some of Courier’s technology from other parts of Microsoft.  Then maybe they could have kept the product alive.  Ask HTC: they’re going to be licensing technology from Microsoft because Redmond insists that Google’s Android operating system infringes on certain of their patents.  And since HTC now builds a number of handsets on Android, instead of being beholden, as they once were, to Windows Mobile, that means they can keep making their products.  Why does HTC have to pay the royalties, and not Google?  Maybe Microsoft decided that going after GOOG would have been a bit much, even for them. The agreement came not a moment to soon: HTC released their “Droid Incredible” (that name’s a bit much), an Android 2.1 handset with amazing hardware and HTC’s own Sense UI, on April 30th (this past Friday). This phone is very well-reviewed.  Maybe that’s why Google basically decided to beg off introducing a version of its Nexus One phone (also manufactured by HTC) on the Verizon Wireless network.  Google backing down?  That’s incredible, if not also a bit much. And that brings us to HP.  Which this week announced its acquisition of Palm and its webOS mobile phone touch-oriented operating system.  HP also killed its own Slate initiative.  Apparently HP realized that Windows 7, even with a proprietary HP touch UI added on top, is no match for the iPad.  I’m guessing they think webOS might work a bit better,  And I’m wondering if HP even wants to use webOS for phone handsets, beyond the Pre and Pixi.  Using it just for slate devices would be a bit extreme, but maybe not too much. Honestly, this was not Microsoft’s best week.  It killed a project and a close partner did likewise.  Then that same partner bought a competing OS product, while another partner released their new product that uses yet another competing OS platform. What did Microsoft actually produce this past week? An update to its Windows Phone 7 developer tools that actually works with the version of Visual Studio 2010 released on April 12th, and the version of Silverlight released three days later. That took three weeks to get synced up, and that’s a bit much too. But at least it happened. Windows Phone 7 is Microsoft’s best hope for a comeback in the SmartPhone market and to offer a credible touch-based tablet device.  This week, two of Microsoft’s slate initiatives died, and its only mobile phone victory was around its competitor’s operating system.  I hope the new platform gets Redmond out of the PC ghetto and into the classes of device that get people really excited today.  If it can’t, that would be a bit much; probably too much.  And, as the signs at the Lonestar Cafe in NYC used to say, too much ain’t enough.

  Read the article

• Streaming desktop with avconv - severe sound issues

  - by Tommy Brunn

  I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

  Read the article

• Windows Azure Recipe: Enterprise LOBs

  - by Clint Edmonson

  Enterprises are more and more dependent on their specialized internal Line of Business (LOB) applications than ever before. Naturally, the more software they leverage on-premises, the more infrastructure they need manage. It’s frequently the case that our customers simply can’t scale up their hardware purchases and operational staff as fast as internal demand for software requires. The result is that getting new or enhanced applications in the hands of business users becomes slower and more expensive every day. Being able to quickly deliver applications in a rapidly changing business environment while maintaining high standards of corporate security is a challenge that can be met right now by moving enterprise LOBs out into the cloud and leveraging Azure’s Access Control services. In fact, we’re seeing many of our customers (both large and small) see huge benefits from moving their web based business applications such as corporate help desks, expense tracking, travel portals, timesheets, and more to Windows Azure. Drivers Cost Reduction Time to market Security Solution Here’s a sketch of how many Windows Azure Enterprise LOBs are being architected and deployed: Ingredients Web Role – this will host the core of the application. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Many Java based applications are also being deployed to Windows Azure with a little more effort. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control – this service is necessary to establish federated identity between the cloud hosted application and an enterprise’s corporate network. It works in conjunction with a secure token service (STS) that is hosted on-premises to establish the corporate user’s identity and credentials. The source code for an on-premises STS is provided in the Windows Azure training kit and merely needs to be customized for the corporate environment and published on a publicly accessible corporate web site. Once set up, corporate users see a near seamless single sign-on experience. Reporting – businesses live and die by their reports and SQL Azure Reporting, based on SQL Server Reporting 2008 R2, can serve up reports with tables, charts, maps, gauges, and more. These reports can be accessed from the Windows Azure Portal, through a web browser, or directly from applications. Service Bus (optional) – if deep integration with other applications and systems is needed, the service bus is the answer. It enables secure service layer communication between applications hosted behind firewalls in on-premises or partner datacenters and applications hosted inside Windows Azure. The Service Bus provides the ability to securely expose just the information and services that are necessary to create a simpler, more secure architecture than opening up a full blown VPN. Data Sync (optional) – in cases where the data stored in the cloud needs to be shared internally, establishing a secure one-way or two-way data-sync connection between the on-premises and off-premises databases is a perfect option. It can be very granular, allowing us to specify exactly what tables and columns to synchronize, setup filters to sync only a subset of rows, set the conflict resolution policy for two-way sync, and specify how frequently data should be synchronized Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Keep it Professional &ndash; Multiple Environments

  - by AjarnMark

  I have certainly been reading blogs a whole lot more than writing them the last several weeks, and it’s about time I got back to writing.  I have been collecting several topics and references for blog posts…some of which will probably just never get written as the timeliness of the topics fade over time.  Nonetheless, I’m back, and I think it is time to revive my Doing Business Right series, this time coming from the slant of managing a development team rather than the previous angle of being self-employed.  First up: separating Dev, Test, and Prod. A few months ago, Colin Stasiuk (@BenchmarkIT) wrote a great post about separating your Dev, Test/UAT, and Prod environments.  This post covers all the important points such as removing Developer access from both PROD and UAT, and the importance of proper deployment (a.k.a. promotion) procedures.  I won’t repeat it all here, go read the original!  But what I do want to address is what I believe to be the #1 excuse people use for not having separate environments:  Money.  I discussed this briefly in my comment on Colin’s post at the time, but let me repeat it here and expand on it a bit. Don’t let the size of your company or the size of its budget dictate whether you do things professionally or not.  I am convinced that most developers and development teams would agree that it is a best practice to have separate environments for development, testing, and production (a.k.a. Live).  So why don’t they?  Because they think that it means separate servers which means more money.  While having separate physical servers for the different environments would be ideal, it is not an absolute requirement in order to make this work.  Here are a few ideas: Use multiple instances of SQL Server and multiple Web Sites with Headers or Ports.  For no additional fees* you can install multiple instances of SQL Server on the same machine.  This gives you a nice separation, allowing you to even use the same database names as will appear in PROD, yet isolating the data and security access.  And in IIS, you can create multiple Web Sites on the same server just by using Host Headers or different port numbers to separate them.  This approach does still pose the risk of non-Prod environments impacting performance on Prod, but when your application is busy enough for that to be a concern, you can probably afford one of the other options. Use desktop PCs instead of servers.  Instead of investing in full server-grade hardware, you can mimic the separate environments on old desktop PCs and at least get functional equivalency, if not performance matching.  The last I checked, Microsoft did not require separate licensing for SQL Server if that installation was used exclusively for dev or test purposes*.  There may be some version or performance differences between this approach and what you have in Prod, but you have isolated test from impacting Prod resources this way. Virtualization.  This is of course one of the hot topics of the day, and I would be remiss if I did not suggest this.  It is quite easy these days to setup virtual machines so that, again, your environments are fairly isolated from one another, and you retain all the security and procedural benefits of having separate environments. So the point is, keep your high professional standards intact.  You don’t need to compromise on using proper procedure just because you work in a small company with a small budget.  Keep doing things the right way! By the way, where I work, our DEV environment is not on a server.  All development is done on the developer’s individual workstation where it can be isolated from other developers’ work for the duration of writing the code, but also where the developers have to reconcile (merge) differences in code under concurrent development.  This usually means that each change is executed multiple times (once per developer to update their environments with the latest changes from others) giving us an extra, informal. test deployment before even going to the Test/UAT server.  It also means that if the network goes down, the developers can continue to hum along because they are not dependent on networked resources.  In fact, they will likely be even more productive because they aren’t being interrupted by email…but that’s another post I need to write. * I am not a lawyer, nor a licensing specialist, but it appeared to be so the last time I checked.  When in doubt, consult an expert on the topic.

  Read the article

• The first day of JavaOne is already over!

  - by delabassee

  In the past Sunday used to be a more relaxing day with ‘just’ some JavaOne activities going on. Sunday used to be a soft day to prepare yourself for an exhausting week. This is now over as JavaOne is expanding; Sunday is now an integral part of the conference. One of the side effect of this extra day is that some activities related to JavaOne and OpenWorld such as MySQL Connect are being push to start a day earlier on Saturday (can you spot the pattern here?). On the GlassFish front, Sunday was a very busy day! It started at the Moscone Center with the annual GlassFish Community Event where the Java EE 7 and GF 4 roadmaps were presented and discussed. During the event, different GlassFish users such as ZeroTurnaround (the JRebel guys), Grupo RBS and IDR Solutions shared their views on GF, why they like GF but also what could be improved. The event was also a forum for the GF community to exchange with some of the key Java EE / GlassFish Oracle Executives and the different GF team members. The Strategy keynote and the Technical keynote were held in the Masonic Auditorium later in the after-noon. Oracle executives have presented the plans for Java SE, Java FX and Java EE. As on-demand replays will be available soon, I will not summarize several hours of content but here are some personal takeaways from those keynotes. Modularity Modularity is a big deal. We know by now that Project Jigsaw will not be ready for Java SE 8 but in any case, it is already possible (and encouraged) to test Jigsaw today. In the future, Java EE plan to rely on the modularity features provided by Java SE, so Project Jigsaw is also relevant for Java EE developers. Shorter term, to cover some of the modular requirements, Java SE will adopt the approach that was used for Java EE 6 and the notion of Profiles. This approach does not define a module system per say; Profiles is a way to clearly define different subsets of Java SE to fulfill different needs (e.g. the full JRE is not required for a headless application). The introduction of different Profiles, from the Base profile (10mb) to the Full Profile (+50mb), has been proposed for Java SE 8. Embedded Embedded is a strong theme going forward for the Java Plaform. There is now a dedicated program : Java Embedded @ JavaOne Java by nature (e.g. platform independence, built-in security, ability easily talks to any back-end systems, large set of skills available on the market, etc.) is probably the most suited platform for the Internet of Things. You can quickly be up-to-speed and develop services and applications for that space just by using your current Java skills. All you need to start developing on ARM is a 35$ Raspberry Pi ARM board (25$ if you are cheap and can live without an ethernet connection) and the recently released JDK for Linux/ARM. Obviously, GlassFish runs on Raspberry Pi. If you wan to go further in the embedded space, you should take a look Java SE Embedded, an optimized, low footprint, Java environment that support the major embedded architectures (ARM, PPC and x86). Finally, Oracle has recently introduced Java Embedded Suite, a new solution that brings modern middleware capabilities to the embedded space. Java Embedded Suite is an optimized solution that leverage Java SE Embedded but also GlassFish, Jersey and JavaDB to deploy advanced value added capabilities (eg. sensor data filtering and) deeper in the network, closer to the devices. JavaFX JavaFX is going strong! Starting from Java SE 7u6, JavaFX is bundled with the JDK. JavaFX is now available for all the major desktop platforms (Windows, Linux and Mac OS X). JavaFX is now also available, in developer preview, for low end device running Linux/ARM. During the keynote, JavaFX was shown running on a Raspberry Pi! And as announced during the keynote, JavaFX should be fully open-sourced by the end of the year; contributions are welcome!. There is a strong momentum around JavaFX, it’s the ideal client solution for the Java platform. A client layer that works perfectly with GlassFish on the back-end. If you were not convince by JavaFX, it’s time to reconsider it! As an old Chinese proverb say “One tweet is worth a thousand words!” HTML5, Project Avatar and Java EE 7 HTML5 got a lot of airtime too, it was covered during the Java EE 7 section of the keynote. Some details about Project Avatar, Oracle’s incubator project for a TSA (Thin Server Architecture) solution, were diluted and shown during the keynote. On the tooling side, Project Easel running on NetBeans 7.3 beta was demo’ed, including a cool NetBeans debugging session running in Chrome! HTML 5, Project Avatar and Java EE 7 deserve separate posts... Feedback We need your feedback! There are many projects, JSRs and products cooking : GlassFish 4, Project Jigsaw, Concurrency Utilities for Java EE (JSR 236), OpenJFX, OpenJDK to name just a few. Those projects, those specifications will have a profound impact on the Java platform for the years to come! So if you have the opportunity, download, install, learn, tests them and give feedback! Remember, you can "Make the Future Java!" Finally, the traditional GlassFish Party at the Thirsty Bear concluded the first JavaOne day. This party is another place where the community can freely exchange with the GlassFish team in a more relaxed, more friendly (but sometime more noisy) atmosphere. Arun has posted a set of pictures to reflect the atmosphere of the keynotes and the GlassFish party. You can find more details on the others Java EE and GlassFish activities here.

  Read the article

• IndyTechFest Recap

  - by Johnm

  The sun had yet to raise above the horizon on Saturday, May 22nd and I was traveling toward the location of the 2010 IndyTechFest. In my freshly awaken, and pre-coffee, state I reflected on the months that preceded this day and how quickly they slipped away. The big day had finally come and the morning dew glistened with a unique brightness that morning. What is this all about? For those who are unfamiliar with IndyTechFest, it is a regional conference held in Indianapolis and hosted by the Indianapolis .NET Developers Association (IndyNDA) and the Indianapolis Professional Association for SQL Server (IndyPASS).  The event presents multiple tracks and sessions covering subjects such as Business Intelligence,  Database Administration, .NET Development, SharePoint Development, Windows Mobile Development as well as non-Microsoft topics such as Lean and MongoDB. This year's event was the third hosting of IndyTechFest. No man is an island No event such as IndyTechFest is executed by a single person. My fellow co-founders, with their highly complementary skill sets and philanthropy make the process very enjoyable. Our amazing volunteers and their aid were indispensible. The generous financial support of our sponsors that made the event and fabulous prizes possible. The spectacular line up of speakers who came from near and far to donate their time and knowledge. Our beloved attendees who sacrificed the first sunny Saturday in weeks to expand their skill sets and network with their peers. We are deeply appreciative. Challenges in preparation With the preparation of any event comes challenges. It is these challenges that makes the process of planning an event so interesting. This year's largest challenge was the location of the event. In the past two years IndyTechFest was held at the Gene B. Glick Junior Achievement Center in Indianapolis. This facility has been the hub of the Indy technical community for many years. As the big day drew near, the facility's availability came into question due to some recent changes that had occurred with those who operated the facility. We began our search for an alternative option. Thankfully, the Marriott Indianapolis East was available, was very spacious and willing to work within the range of our budget. Within days of our event, the decision to move proved to be wise since the prior location had begun renovations to the interior. Whew! Always trust your gut. Every day it's getting better At the ending of each year, we huddle together, review the evaluations and identify an area in which the event could improve. This year's big opportunity for improvement resided in the prize give-away portion at the end of the day. In the 2008 event, admittedly, this portion was rather chaotic, rushed and disorganized. This year, we broke the drawing into two sections, of which each attendee received two tickets. The first ticket was a drawing for the mountain of books that were given away. The second ticket was a drawing for the big prizes, the 2 Xboxes, 3 laptops and iPad. We peppered the ticket drawings with gift card raffles and tossing t-shirts into the audience. If at first you don't succeed, try and try again Each year of IndyTechFest, we have offered a means for ad-hoc sessions or discussion groups to pop-up. To our disappointment it was something that never quite took off. We have always believed that this unique type of session was valuable and wanted to figure out a way to make it work for this year. A special thanks to Alan Stevens, who took on and facilitated the "open space" track and made it an official success. Share with your tweety When the attendee badges were designed we decided to place an emphasis on the attendee's Twitter account as well as the events hash-tag (#IndyTechFest) to encourage some real-time buzz during the day. At the host table we displayed a Twitter feed for all to enjoy. It was quite successful and encouraging use of social media. My badge was missing my Twitter account since it was recently changed. For those who care to follow my rather sparse tweets, my address is @johnnydata. Man, this is one long blog post! All in all it was a very successful event. It is always great to see new faces and meet old friends. The planning for the 2011 IndyTechFest will kick off very soon. We have more capacity for future growth and a truck full of great ideas. Stay tuned!

  Read the article

• How to Use RDA to Generate WLS Thread Dumps At Specified Intervals?

  - by Daniel Mortimer

  Introduction There are many ways to generate a thread dump of a WebLogic Managed Server. For example, take a look at: Taking Thread Dumps - [an excellent blog post on the Middleware Magic site]or  Different ways to take thread dumps in WebLogic Server (Document 1098691.1) There is another method - use Remote Diagnostic Agent! The solution described below is not documented, but it is relatively straightforward to execute. One advantage of using RDA to collect the thread dumps is RDA will also collect configuration, log files, network, system, performance information at the same time. Instructions 1. Not familiar with Remote Diagnostic Agent? Take a look at my previous blog "Resolve SRs Faster Using RDA - Find the Right Profile" 2. Choose a profile, which includes the WebLogic Server data collection modules (for example the profile "WebLogicServer"). At RDA setup time you should see the prompt below: ------------------------------------------------------------------------------- S301WLS: Collects Oracle WebLogic Server Information ------------------------------------------------------------------------------- Enter the location of the directory where the domains to analyze are located (For example in UNIX, <BEA Home>/user_projects/domains or <Middleware Home>/user_projects/domains) Hit 'Return' to accept the default (/oracle/11AS/Middleware/user_projects/domains) > For a successful WLS connection, ensure that the domain Admin Server is up and running. Data Collection Type:   1  Collect for a single server (offline mode)   2  Collect for a single server (using WLS connection)   3  Collect for multiple servers (using WLS connection) Enter the item number Hit 'Return' to accept the default (1) > 2 Choose option 2 or 3. Note: Collect for a single server or multiple servers using WLS connection means that RDA will attempt to connect to execute online WLST commands against the targeted server(s). The thread dumps are collected using the WLST function - "threadDumps()". If WLST cannot connect to the managed server, RDA will proceed to collect other data and ignore the request to collect thread dumps. If in the final output you see no Thread Dump menu item, then it's likely that the managed server is in a state which prevents new connections to it. If faced with this scenario, you would have to employ alternative methods for collecting thread dumps. 3. The RDA setup will create a setup.cfg file in the RDA_HOME directory. Open this file in an editor. You will find the following parameters which govern the number of thread dumps and thread dump interval. #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=5000 The example lines above show the default settings. In other words, RDA will collect 10 thread dumps at 5000 millisecond (5 second) intervals. You may want to change this to something like: #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=30000 However, bear in mind, that such change will increase the total amount of time it takes for RDA to complete its run. 4. Once you are happy with the setup.cfg, run RDA. RDA will collect, render, generate and package all files in the output directory. 5. For ease of viewing, open up the RDA Start html file - "xxxx__start.htm". The thread dumps can be found under the WLST Collections for the target managed server(s). See screenshots belowScreenshot 1:RDA Start Page - Main Index Screenshot 2: Managed Server Sub Index Screenshot 3: WLST Collections Screenshot 4: Thread Dump Page - List of dump file links Screenshot 5: Thread Dump Dat File Link Additional Comment: A) You can view the thread dump files within the RDA Start Page framework, but most likely you will want to download the dat files for in-depth analysis via thread dump analysis tools such as: Thread Dump Analyzer -  Samurai - a GUI based tail , thread dump analysis tool If you are new to thread dump analysis - take a look at this recorded Support Advisor Webcast  Oracle WebLogic Server: Diagnosing Performance Issues through Java Thread Dumps[Slidedeck from webcast in PDF format]B) I have logged a couple of enhancement requests for the RDA Development Team to consider: Add timestamp to dump file links, dat filename and at the top of the body of the dat file Package the individual thread dumps in a zip so all dump files can be conveniently downloaded in one go.

  Read the article

• Upcoming User Group Events in 2011

  - by john.orourke(at)oracle.com

  At a recent customer event, someone asked me if Oracle had any plans to re-create the Hyperion Solutions Conference.  Unfortunately the answer is no.  With so many different product lines it would be challenging and costly for Oracle to run separate user conferences for every product line, and it would create too many events for customers with multiple products to attend.  So Oracle Open World is the company's main event for showcasing what's new and what's coming across all product lines.  If customers find Oracle OpenWorld too overwhelming or if the timing is bad, there are a number of other conferences, which are run by Oracle user groups and include a number of sessions focused on Oracle Hyperion EPM and BI products.  Here's a sneak preview of what's coming up for conferences in 2011 where you can network with other Hyperion users and learn what's new and what's coming in our products. Alliance 2011:  This conference is run by the Oracle Higher Education User Group (HEUG).  It's being held March 27 - 30th in lovely Denver, Colorado.  (a great location and time for skiers!)  This event is targeted at customers in Higher Education and Public Sector organizations and is expecting to draw over 3,500 attendees.  There will be a number of sessions focusing on Oracle Hyperion EPM and BI products in the Budgeting track, as well as the Reporting & BI track.  This includes product-focused sessions delivered by Oracle and partners, as well as case studies delivered by customers.  Here's a link to the registration page where you can get more information: http://www.heug.org/p/cm/ld/fid=255 Collaborate 2011:  This conference is run by three different user groups;  OAUG, IOUG and Quest.  It's being held April 10 - 14th in sunny Orlando, Florida.  (yes, sunshine and warmth!)  This event is targeted to customers with Oracle E-Business Suite, PeopleSoft, JD Edwards, Hyperion, Primavera and other products and is expected to draw over 5,000 attendees.  You'll find a number of sessions focused on Oracle Hyperion EPM and BI products in the BI/Data Warehousing/EPM track.  This includes product-focused sessions delivered by Oracle, our partners, and customers as well as a number of customer case studies.  There will also be an exhibit area with a number of demo pods focused on EPM and BI products.  Here's a link to the conference web site where you can get more information: http://collaborate.oaug.org/ Also, please note that the OAUG has a Hyperion SIG that runs focused EPM/Hyperion events throughout the year.  Here's a link to their web site where you can get more information: http://hyperionsig.oaug.org/ Kscope 2011:  Formerly the Kaleidoscope conference, this one is run by the Oracle Developer Tools User Group (ODTUG).  This conference is being held June 26 - 30th in Long Beach, CA. (surf's up!)  Historically, this event has focused on Oracle Development tools, but over the past few years the EPM and BI content has grown with over 100 sessions planned this year.  So this event is becoming a great venue for existing Hyperion customers to learn about the latest developments with Oracle Essbase, Hyperion Planning, Hyperion Financial Management, Oracle BI and other products.   You'll also find hands-on workshops, product demonstrations as well as EPM and BI Symposiums run by Oracle Development staff.  Here's a link to the web site where you can get more details.  http://www.kscope11.com/biepm UKOUG Conference Series:  EPM and Hyperion 2011:  For Hyperion customers in the UK, the UKOUG has a Hyperion SIG that runs a focused conference for EPM and Hyperion products.  The 2011 event is planned for June in London.  Here's a link to the web site for this event where you can get more information: http://hyperion.ukoug.org/default.asp?p=8461 In addition to these conferences, you can also find Oracle EPM and BI content at regional user group meetings globally as well as Marketing events run by Oracle.  Check the events page at www.oracle.com for the details on upcoming Marketing and regional User Group events.  So while Oracle will not be trying to replicate the Hyperion Solutions conference, the good news is that there are a number of other events available where customers can find out what's new and what's coming with Oracle EPM and BI products.  And these events are running at different times of the year in different locations - so you can pick the event that makes the most sense for your company from a timing and location standpoint. I'll be delivering a number of sessions at the Alliance and Collaborate conferences and hope to see many of our loyal customers and partners at these events.  And there's always Oracle OpenWorld coming up in October, for which the planning has already started.  I look forward to seeing you in 2011.

  Read the article

• Whoosh: PASS Board Year 1, Q4

  - by Denise McInerney

  "Whoosh". That's the sound the last quarter of 2012 made as it rushed by. My first year on the PASS Board is complete, and the last three months of it were probably the busiest. PASS Summit 2012 Much of October was devoted to preparing for Summit. Every Board  member, HQ staffer and dozens of volunteers were busy in the run-up to our flagship event. It takes a lot of work to put on the Summit. The community meetings,  first-timers program, keynotes, sessions and that fabulous Community Appreciation party are the result of many hours of preparation. Virtual Chapters at the Summit With a lot of help from Karla Landrum, Michelle Nalliah, Lana Montgomery and others at HQ the VCs had a good presence at Summit. We started the week with a VC leaders meeting. I shared some information about the activities and growth during the first part of the year.   From January - September 2012: The number of VCs increased from 14 to 20 VC membership  grew from 55,200 to 80,100 Total attendance at VC meetings increased from 1,480 to 2,198 Been part of PASS Global Growth with language-based VC- including Chinese, Spanish and Portuguese. We also heard from some VC leaders and volunteers. Ryan Adams (Performance VC) shared his tips for successful marketing of VC events. Amy Lewis (Business Intelligence VC) described how the BI chapter has expanded to support PASS' global growth by finding volunteers to organize events at times that are convenient for people in Europe and Australia. Felipe Ferreira (Portuguese language VC) described the experience of building a user group first in Brazil, then expanding to work with Portuguese-speaking data professionals around the world. Virtual Chapter leaders and volunteers were in evidence throughout Summit, beginning with the Welcome Reception. For the past several years VCs have had an organized presence at this event, signing up new members and advertising their meetings. Many VC leaders also spent time at the Community Zone. This new addition to the Summit proved to be a vibrant spot were new members and volunteers could network with others and find out how to start a chapter or host a SQL Saturday. Women In Technology 2012 was the 10th WIT Luncheon to be held at Summit. I was honored to be asked to be on the panel to discuss the topic "Where Have We Been and Where are We Going?" The PASS community has come a long way in our understanding of issues facing women in tech and our support of women in the organization. It was great to hear from panelists Stefanie Higgins and Kevin Kline who were there at the beginning as well as Kendra Little and Jen Stirrup who are part of the progress being made by women in our community today. Bylaw Changes The Board spent a good deal of time in 2012 discussing how to move our global growth initiatives forward. An important component of this is a proposed change to how the Board is elected with some seats representing geographic regions. At the end of December we voted on these proposed bylaw changes which have been published for review. The member review and feedback is open until February 8. I encourage all members to review these changes and send any feedback to [email protected]  In addition to reading the bylaws, I recommend reading Bill Graziano's blog post on the subject. Business Analytics Conference At Summit we announced a new event: the PASS Business Analytics Conference. The inaugural event will be April 10-12, 2013 in Chicago. The world of data is changing rapidly. More and more businesses want to extract value and insight from their data. Data professionals who provide these insights or enable others to do so are in demand. The BA Conference offers expert content on predictive analytics, data exploration and visualization, content delivery strategies and more. By holding this new event PASS is participating in important discussions happening in our industry, offering our members more educational value and reaching out to data professionals who are not currently part of our organization. New Year, New Portfolio In addition to my work with the Virtual Chapters I am also now responsible for the 24 Hours of PASS portfolio. Since the first 24HOP of 2013 is scheduled for January 30 we started the transition of the portfolio work from Rob Farley to me right after Summit. Work immediately started to secure speakers for the January event. We have also been evaluating webinar platforms that can be used for 24HOP as well as the Virtual Chapters. Next Up 24 Hours of PASS: Business Analytics Edition will be held on January 30. I'll be there and will moderate one or two sessions. The 24HOP topics are a sneak peek into the type of content that will be offered at the Business Analytics Conference. I hope to see some of you there. The Virtual Chapters have hit the ground running in 2013; many of them have events scheduled. The Application Development VC is getting restarted  and a new Business Analytics VC will be starting soon. Check out the lineup and join the VCs that interest you. And watch the Events page and Connector for announcements of upcoming meetings. At the end of January I will be attending a Board meeting in Seattle, and February 23 I will be at SQL Saturday #177 in Silicon Valley.

  Read the article

• Oracle WebCenter at the Enterprise 2.0 Conference

  - by Brian Dirking

  We had a great week at the E20 Conference, presenting in four sessions – Andy MacMillan gave a session titled Today’s Successful Enterprises are Social Enterprises and was on a panel that Tony Byrne moderated; Christian Finn spoke on a panel on Unified Communications Unified Communications + Social Computing = Best of Both Worlds?, Mark Bennett spoke on a panel on The Evolution of Talent Management. The key areas of focus this year were sentiment analysis, adoption and community building, the benefits of failure, and social’s role in process applications. Sentiment analysis. This was focused not on external audiences but more on employee sentiment. Tim Young showed his internal "NikoNiko" project, where employees use smilies to report their current mood. The result was a dashboard that showed the company mood by department. Since the goal is to improve productivity, people can see which departments are running into issues and try and address them. A company might otherwise wait until the end of the quarter financials to find out that there was a problem and product didn’t ship. This is a way to identify issues immediately. Tim is great – he had the crowd laughing as soon as he hit the stage, with his proposed hastag for his session: by making it 138 characters long, people couldn’t say much behind his back. And as I tweeted during his session, I loved his comment that complexity diffuses energy - it sounds like something Sun Tzu would say. Another example of employee sentiment analysis was CubeVibe. Founder and CEO Aaron Aycock, in his 3 minute pitch or die session talked about how engaged employees perform better. It was too bad he got gonged, he was just picking up speed, but CubeVibe did win the vote – congratulations to them. Internal adoption, community building, and involvement. On this topic I spoke to Terri Griffith, and she said there is some good work going on at University of Indiana regarding this, and hinted that she might be blogging about it in the near future. This area holds lots of interest for me. Amongst our customers, - CPAC stands out as an organization that has successfully built a community. So, I wonder - what are the building blocks? A strong leader? A common or unifying purpose? A certain level of engagement? I imagine someone has created an equation that says “for a community to grow at 30% per month, there must be an engagement level x to the square root of y, where x equals current community size, and y equals the expected growth rate, and the result is how many engagements the average user must contribute to maintain that growth.” Does anyone have a framework like that? The net result of everyone’s experience is that there is nothing to do but start early and fail often. Kevin Jones made this the focus of his keynote. He talked about the types of failure and what they mean. And he showed his famous kids at work video: Kevin’s blog also has this post: Social Business Failure #8: Workflow Integration. This is something that we’ve been working on at Oracle. Since so much of business is based in enterprise applications such as ERP and CRM (and since Oracle offers e-Business Suite, Siebel, PeopleSoft, and JD Edwards, as well as Fusion Applications), it makes sense that the social capabilities of Oracle WebCenter is built right into these applications. There are two types of social collaboration – ad-hoc, and exception handling. When you are in a business process and encounter an exception, you immediately look for 1) the document that tells you how to handle it, or 2) the person who can tell you how to handle it. With WebCenter built into these processes, people either search their content management system, or engage in expertise location and conversation. The great thing is, THEY DON’T HAVE TO LEAVE THE APPLICATION TO DO IT. Oracle has built the social capabilities right into the applications and business processes. I don’t think enough folks were able to see that at the event, but I expect that over the next six months folks will become very aware of it. WebCenter also provides the ability to have ad-hoc collaboration, search, and expertise location that folks need when they are innovating or collaborating. We demonstrated Oracle Social Network. It’s built on our Oracle WebCenter product to provide social collaboration inside and outside of your company. When we showed it to people, there were a number of areas that they commented on that were different from the other products being shown at the conference: Screenshots from within the product Many authors working on documents simultaneously Flagging people for follow up Direct ability to call out to people Ability to see presence not just if someone is online, but which conversation they are actively in Great stuff, the conference was full of smart people that that we enjoy spending time with. We’ll keep up in the meantime, but we look forward to seeing you in Boston.

  Read the article

• What's New In 11.1.2.1 (Talleyrand SP1)

  - by russ.bishop

  This release is primarily about bug fixes and that's what we spent the most time on, but we also addressed a number of other things: 1. Performance improvements We've done a lot of work to improve the performance of page load and execution times. For example, the View Compare page is about half the size it was previously! We've also done a lot of work on the server to improve performance of queries, exports, action scripts, etc. We implemented some finer-grained locking so fewer operations will block other users while they are in progress. We made some optimizations to improve performance when you have a lot of network or database latency as well. Just a few examples: An Import that previously took 8 GB of memory and hours to complete now runs in about 30 minutes and never takes more than 1 GB of RAM. Searching by exact Node Name now completes within 2 seconds even for a hierarchy with millions of nodes. Another search that was taking 30 seconds to run now completes in less than 5 seconds. 2. Upgrade support This release supports automatic upgrade from previous releases, built right into the console. 3. Console Improvements The Console has been reorganized and made easier to use. It is also much more multi-threaded so it responds quicker without freezing up when you save changes or when it needs to get status. 4. Property Namespaces Properties now have a concept called a Namespace. This is tied into the Application Templates to prevent conflicts with duplicate property names. Right now, if you have an AccountType and you pull in the HFM template, it also has AccountType so you end up creating properties with decorations on the name like "Account Type (HFM)". This is no longer necessary. In addition, properties within a namespace must have unique labels but they can be duplicated across namespaces. So in the Property Grid when you click on the HFM category, you just see "AccountType". When you click on MyCategory, you see "AccountType", but they are different properties with different values. Within formulas, the names are still unique (eg: Custom.AccountType vs HFM.AccountType). I'll write more about this one later. 5. Single Sign On DRM now supports Single Sign-On via HSS. For example, if you are using Oracle's OAM as your SSO solution then you configure HSS to use OAM just like you would before. You also configure DRM to use HSS, again just like before. Then you configure OAM to protect the DRM web app, like you would any other website. However once you do those things, users are no longer prompted to enter their username/password. They simply get redirected to OAM if they don't already have a login token, otherwise they pick their application and sail right into DRM. You can also avoid having to pick an application (see the next item) 6. URL-based navigation You can now specify the application you want to log into via the URL. Combined with SSO and your Intranet, it becomes easy to provide links on our intranet portal that take users directly into a specific DRM application. We also support specifying the Version, Hierarchy, and Node. Again, this can be used on your internal portal, but the scenarios get even more interesting when you are using workflow like Oracle BPEL you can automatically generate links within emails that will take users directly to a specific node in the UI. 7. Job status and cancellation A lot of the jobs now report their status and support true cancellation. Action Scripts also report a progress complete percentage since the amount of work is known ahead of time. 8. Action Script Options Action scripts support Option declarations at the top of the file so a script can self-describe (when specified in the file, the corresponding item in the file is ignored). For example: Option|DetectDelimiter Option|UsePropertyNames|true This will tell DRM to automatically detect the delimiter (a pipe symbol in this case) and that all references to properties are by Name, not by Label. Note that when you load a script in the UI, if you use Labels we automatically try to match them up if they are unique. Any duplicates are indicated and you are presented with a choice to pick which property you actually referred to. This is somewhat similar to Version substitution, but tailored for properties. There are other more minor changes and like I said earlier a lot of bug fixes and performance improvements. Hopefully I will get a chance to dig into some of these things in future blog posts.

  Read the article

• Architect Day: Boston - Agenda Update

  - by Bob Rhubart

  Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. When: September 12, 2012 8:30am – 5:00pm Where: Boston Marriott Burlington One Burlington Mall Road Burlington, MA 01803 Register now Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast Salon E Foyer 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Salon E 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Salon E 10:00 am - 10:30 am Securing Public and Private Clouds | Anton Nielsen Long before the term "Cloud Computing" existed, Oracle technologies supported and promoted the concept. Centralized data with remote users has been at the core of these technologies for decades. The public cloud, and extending private clouds to the internet, though, has added security challenges never imagined decades ago. This presentation will examine a real life security breach and introduce architecture, technologies and policies to secure public and private clouds.  Salon E 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Salon E Innovations in Grid Computing with Oracle Coherence | Rob Misek Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Salon C 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Salon E Oracle Enterprise Manager | Avi Huber Much more than a DB management tool, Oracle Enterprise Manager provides management and monitoring coverage for the entire Oracle stack, and beyond. This session will concentrate on the middleware management functionality in OEM, starting with Real User Experience monitoring, through AppServer management, and into deep-dive Java diagnostics. We’ll discuss Business Driven Application Management (BDAM) and the benefits of top-down monitoring. Lastly, we’ll demonstrate how to trace a specific user experience problem, through a multitier SOA application, to its root cause, deep in the JVM. Salon C 12:15 pm - 1:15 pm Lunch Salon E Foyer 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Salon E 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy (ETS). Salon E 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Salon C 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Salon E 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Salon E 4:15 pm - 5:00 pm Networking / Reception Salon E Foyer Note: Session schedule and content subject to change.

  Read the article

< Previous Page | 736 737 738 739 740 741 742 743 744 745 746 747  | Next Page >