Search Results

Search found 27777 results on 1112 pages for 'display manager'.

Page 748/1112 | < Previous Page | 744 745 746 747 748 749 750 751 752 753 754 755  | Next Page >

• USB 3.0 hard disk not detected on a particular host controller?

  - by Alvin Wong

  I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

  Read the article

• How to email photo from Ubuntu F-Spot application via Gmail?

  - by Norman Ramsey

  My father runs Ubuntu and wants to be able to use the Gnome photo manager, F-Spot, to email photos. However, he must use Gmail as his client because (a) it's the only client he knows how to use and (b) his ISP refuses to reveal his SMTP password. I've got as far as setting up Firefox to use GMail to handle mailto: links and I've also configured firefox as the system default mailer using gnome-default-applications-properties. F-Spot presents a mailto: URL with an attach=file:///tmp/mumble.jpg header. So here's the problem: the attachment never shows up. I can't tell if Firefox is dropping the attachment header, if GMail doesn't support the header, or what. I've learned that: There's no official header in the mailto: URL RFC that explains how to add an attachment. I can't find documentation on how Firefox handles mailto: URLs that would explain to me how to communicate to Firefox that I want an attachment. I can't find any documentation for GMail's URL API that would enable me to tell GMail directly to start composing a message with a given file as an attachement. I'm perfectly capable of writing a shell script to interpolate around F-Spot to massage the URL that F-Spot presents into something that will coax Firefox into doing the right thing. But I can't figure out how to persuade Firefox to start composing a GMail message with a local file attached. Any help would be greatly appreciated.

  Read the article

• systemd: enabling cherokee service as a `unit file`

  - by Calvin Cheng

  So I am learning how to use systemd to initialize my services automatically on server reboot. So of course, I first make sure I have systemd and some optional systemd related packages installed. pacman -S systemd initscripts-systemd Installation seems to go well and checking, I can see that systemd and its dependency libsystemd are installed. And the optional package initscripts-systemd is also installed:- [root@li280-195 ~]# pacman -Ss systemd extra/libsystemd 44-5 [installed] systemd client libraries extra/systemd 44-5 [installed] system and service manager extra/systemd-sysvcompat 2-2 sysvinit compat symlinks for systemd community/initscripts-systemd 20120412-1 [installed] Arch specific systemd initialization/bootup scripts for systemd community/systemd-arch-units 20120412-2 Arch specific Systemd unit files Next, I ensure that systemd is loaded up when my server reboots, via grub in grub's /boot/grub/menu.lst file like this:- kernel /boot/vmlinuz root=/dev/xvda ro init=/bin/systemd Rebooting my server to check, all loads up well and I can check that systemd is operational via:- systemctl list-unit-files However, I don't see my cherokee initialization script (which is simply created at /etc/rc.d/cherokee when I installed cherokee earlier via pacman -S cherokee) being listed as one of my unit files. So the question is, how do I do that? How do I put my cherokee initialization script under systemd's control?

  Read the article

• Bluescreen Stop 0x00000027 RDR_FILE_SYSTEM after cloning system on new HDD

  - by Daniel

  A couple of months ago I got a new 500GB HDD for my no-name-brand Laptop PC and I cloned the complete Win 7 Pro 32bit system with clonezilla from the old 70GB drive to the new one. At first everything was great, the new driver was immediately updated. But since then I get on a more and more frequent level (used to be every 2-3 days, but now it's more like 2-3 times a day) a BSOD Stop error. From the eventlog in Windows I know that there are two different error codes sppoking aroung: 0x00000027 (0xbaad0073, 0x9954f80c, 0x9954f3f0, 0x8ecd7c82) RDR_FILE_SYSTEM 0x00000044 (0x85443230, 0x00000eae, 0x00000000, 0x00000000) MULTIPLE_IRP_COMPLETE_REQUESTS I checked for viruses and did a complete HDD check using the Windows tool and WesternDigital tool (which is the producer of the new HDD) without results. I also looked for driver updates but couldn't find any. The name of the HDD as shown in the device manager is: WDC WD5000BPVT-00HXZT1 ATA Device. I'm really a noob regarding those kind of problems, so if you have any idea what I can try without losing all my data, let me know. Also, if any additional information are required.

  Read the article

• How can I uninstall Broadcom Bluetooth software that won't disappear in Windows XP?

  - by T. Webster

  My situation is similar to this question for Windows 7, except my OS is Windows XP SP3. I have recently realized I made the mistake of buying a Bluetooth adapter and installing the Broadcom/Widcomm Bluetooth stack driver software. Now that I know that the software is no good, I want to uninstall it. Then I'll install the Toshiba stack for the Cirago adapter. Right now, when I double-click on the setup.exe file that came with the Cirago driver, nothing happens (it doesn't start setup). I've attempted to uninstall all Bluetooth driver software in Device Manager, and I don't see any remnants of any Bluetooth drivers there. But I do see that the little Bluetooth icon still persists: I don't see anything about Bluetooth, Broadcom, or Widcomm in Add/Remove Programs. I don't see any folder names Broadcom or Widcomm in Program Files folder, either. But I do see that Broadcom does show up in the registry with respect to Bluetooth, as shown here. I also renamed every file in C:\Windows\inf that starts with "bth" so that it ends with ".old". What should I do now to completely wipe this persistent Broadcom Bluetooth software off my computer?

  Read the article

• Windows Key is shutting my PC with Windows 7 down when pressed

  - by jasondavis

  I am having a really annoying problem lately with my Windows 7 PC. The problem, is all of a sudden, just within the last day or 2, anytime I hit the WIN (Windows keyboard key) instead of popping up the start menu, the system shuts down all my programs and trys to shut down, the only reason it doesn't suceed is because one of the programs I will have running will have an un-saved document, so it will ask me if I want to save the document before shutting down, I then can hit cancel and it halts the process. I do not remember installing anything and programs from from around the time it started doing this, maybe 2-3 days ago. I have gone through and searched Google for every Process running in the taskmanager to see which processes were REQUIRED for Windows to run, I then closed eveything down and killed all the non-essential Processes and the result was this... The reason you see notepad.exe is because I had it open with an unsaved document to keep the system from shutting down, I then tried hitting the win key after I shut each process down, after everything was shut to just show the above, it still tries to shut my system down, this is driving me insane, please help I am at a lost. I am about to see if I can try a different keyboard just encase it is some malfunction on the keyboard. The reason I need to access the WIN key or would like to is because I have Win + v set up to work with a special clipboard manager I believe it is called ClipX

  Read the article

• Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

  - by Yzmir Ramirez

  I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in.

  Read the article

• Windows, why 8 GB of RAM feel like a few MB?

  - by Desmond Hume

  I'm on Windows 7 x64 with 4-core Intel i7 and 8 GB of RAM, but lately it feels like my computer's "RAM" is located solely on the hard drive. Here is what the task manager shows: The total amount of memory used by the processes in the list is just about 1 GB. And what is happening on my computer for a few days now is that one program (Cataloger.exe) is continually processing large quantities of (rather big) files, repeatedly opening and reading them for the purposes of cataloging. But it doesn't grow too much in memory and stays about that size, about 90 MB. However, the amount of data it processes in, say, 30 minutes can be measured in gigabytes. So my guess was that Windows file caching has something to do with it. And after some research on the topic, I came across this program, called RamMap, that displays detailed info on a computer's RAM. Here is the screenshot: So to me it looks like Windows keeps in RAM huge amounts of data that is no longer needed, redirecting any RAM allocation requests to the pagefile on the hard drive. Even when I close Cataloger.exe, the RamMap reports the size of the mapped file as about the same for a long time on. And it's not just this particular program. Earlier I noticed that similar slowdown occurred after some massive file operations with other programs. So it's really not an exception. Whatever it is, it slows down the computer by like 50 times. Opening a new tab in Chrome takes 20-30 seconds, opening a new program can take up to a minute. Due to the slowdown, some programs even crash. So what do you think, is the problem hiding in file caching or somewhere else? How do I solve it?

  Read the article

• Add shortcuts to (Windows + X) context menu

  - by KasiyA

  I want to add services.msc into Win+X context menu in windows 8 (x64). I know similar question is in here but it's not good with using Win+X Editor, because it doesn't add Underlined key for shortcuts that added with that and it's not good without having quickly underlined key. I want do that for maually Context menu folder is: C:\Users\User_Name\AppData\Local\Microsoft\Windows\WinX And hide desktop.ini files is as bellows (in ...\WinX\group2\desktop.ini) [LocalizedFileNames] 1 - Run.lnk=@%SystemRoot%\system32\shell32.dll,-12710 4 - Control Panel.lnk=@%SystemRoot%\system32\shell32.dll,-4161 5 - Task Manager.lnk=@%SystemRoot%\system32\authui.dll,-12139 3 - Windows Explorer.lnk=@%SystemRoot%\system32\shell32.dll,-22067 2 - Search.lnk=@%SystemRoot%\system32\shell32.dll,-30517 I copied sevices.msc shortcut into above path in group2 folder and add this line 6 - Sevices.lnk=@%SystemRoot%\system32\sevices.msc,????? in desktop.ini file. First Question: I don't know If this line 6 - Sevices.lnk=@%SystemRoot%\system32\sevices.msc,-????? that I added is correct or not? Also I don't know what to use instead of -????? Last Question: Why desktop.ini contents is not Sorted. I triyed to manually sort them but when I restart Explorer again it was become out of order.Why?

  Read the article

• No headphone or speakers plugged in - Windows 7 issue

  - by Amit Ranjan

  I am facing a wierd issue between my sound card driver and Windows7(any edition). I have a sony vaio notebook (VPCEB24EN). Two days ago, on start I got diabled wifi, charging and speakers. Then I restart the PC and everthing worked fine. Later on I again restarted my machine, and then I found the my speakers were not working. I thought, restart will work. I restarted many more times but it did'nt work. I searched google and found that , it might be due to : 1. Hardware is not switched on from bios. 2. No hardware. 3. overriding 64-bit drivers with 32-bit drivers. To make it working, I restored my laptop from scratched, but while restoring pc, the realtek HD drivers, it gave me an error 505. I then formatted the drive and installed Win7 Ultimate 32bit (With PC was, Win7 64-bit Home Basic). I got lots of yellow exclamation in device manager, thinking now this will resolve my issue. But Even after the installing all drivers on a fresh installation, I was still with the same position. A red cross on speaker- No Speakers or Headphone plugged in. Please Note: My Laptop is Vaio , E Series, VPCEB24EN. Audio : Intel® High Definition Audio compatible but accepts Realted Audio. While using BIOS Agent, I got Intel Chipset 5 Series Audio Adapter and ATI RV370 Audio adapter found on my board. Installed is Win7 32bit Ultimate. factory default was Win7 64-bit Home Basic Memory: RAM 3GB/ 320GB HDD Display : ATI Mobility Radeon™ HD 5145 Graphics

  Read the article

• Installing and running a guest OS on KVM-qemu with only serial console access

  - by nixnotwin

  I am trying to installing a bsd distro with virt-installer. With a Linux distro I used this: virt-install -n debian -r 1024 --vcpus=1 --accelerate -v --disk /var/kvm/installation-disks/debian.img,size=6--nographics --network=bridge:br0,model=ne2k_pci,mac=52:54:00:66:68:09 -l http://ftp.de.debian.org/debian/dists/squeeze/main/installer-amd64/current/images/ -x console=ttyS0,115200 This loads the installer directly from the online mirror. With Fedora I used this mirror: http://www.nic.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/16/Fedora/x86_64/os/ Are there such mirrors for freebsd or openbsd? The reason I want direct installable ftp/http mirrors is because I can access my physical server only via ssh, and it doesn't have a X server or a window manager to give me a VNC GUI. When I tried installing centos 6 with an online mirror I was able to finish the installation via serial console, but after I rebooted it, the serial console never worked for me. I tried everything possible---editing menu.lst, inttab and securtty files. Fedora 16 booted fine from serial console, but got stuck when it loaded anaconda installer. I tried editing freebsd iso installation media by adding serial console option to boot option. And installation was successful. But couldn't boot into it becuase it wasn't giving console acess. I couldn't edit any files as ufs partition cannot be loaded with write access on my Ubuntu server 10.04. Only debian squeeze worked well, it worked for me even without editing a single configuration file. I want to have CLI versions of fedora/centos and freebsd/openbsd. But, looks like there isn't any hope for me to have them, as I have to depend on a serial console to do everything.

  Read the article

• .ashx cannot find type error on IIS7 , no problems on webdev server

  - by Aivan Monceller

  I am trying to make AspNetComet.zip work on IIS7 (a simple comet chat implementation) Here is a portion of my web.config. <system.web> <httpHandlers> <add verb="POST" path="DefaultChannel.ashx" type="Server.Channels.DefaultChannelHandler, Server"/> </httpHandlers> </system.web> <system.webServer> <handlers> <add name="DefaultChannelHandler" verb="POST" path="DefaultChannel.ashx" type="Server.Channels.DefaultChannelHandler, Server"/> </handlers> </system.webServer> When I publish the website on my localhost IIS7 I receive an error: POST http://localhost/DefaultChannel.ashx 500 Internal Server Error Could not load type 'Server.Channels.DefaultChannelHandler The target framework of this project is .Net 2.0 I tried the Classic and Integrated Mode application pool for .Net 2.0 with no luck. I also tried converting the project to 4.0 and tried the Classic and Integrated Mode application pool for .Net 4.0 with no luck. I also tried adding the managed handler through IIS Manager's Handler Mappings. If you have time please download the source (184kb) to reproduce the problem on your own machine. The zip contains a VS2010 solution (.Net 2.0). You could also try to convert this to .Net 4.0 I am using Windows 7 anyway if that matters. If you need more details, please drop your comments below. This is working fine by the way on my webdev server.

  Read the article

• WSS Search fills 10 GB limit on SBS server 2011

  - by Kactus

  I've got a SBS Server 2011 Standard SP1 that isn't very busy. 2 Users local and 2 remote. We have sharepoint that has maybe a dozen small documents at most. I've just started getting the following two error occur Could not allocate space for object 'dbo.MSSBatchHistory'.'IX_MSSBatchHistory' in database 'WSS_Search_SERVER' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. And CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 10240 MB per database. Digging around in SQL manager I see that WSS Search DB file size is 10241MB, the log file is only 147 MB Firstly, why is WSS Search taking up so much space? How can I stop it from doing so, and what can I do now to get things running ok. I know about log file truncating and this isn't the case here since the log is tiny. Any help is appreciated. There is plenty of free space on the disk (791GB free) Thanks Kactus

  Read the article

• Almost every Inkscape extension yields an error in Mac OS X

  - by andyvn22

  I've run the latest few versions of Inkscape (currently landed on "0.47+devel"), and have been having trouble with the Extensions menu. So far, in every version of Inkscape I've tried, nearly every extension yields the following error: The fantastic lxml wrapper for libxml2 is required by inkex.py and therefore this extension. Please download and install the latest version from http://cheeseshop.python.org/pypi/lxml/, or install it through your package manager by a command like: sudo apt-get install python-lxml I've tried the instructions listed there, of course, with no effect. I've also found many references to this issue on fora, in bug trackers, etc., and as such also tried: sudo easy_install lxml cd /Applications/Inkscape.app/Contents/Resources/lib mv libxml2.2.dylib libxml2.2.dylib.old ln -s /usr/lib/libxml2.dylib and a few similar solutions. Nothing has produced any change in Inkscape's behavior. Does anyone know A) what's really going on here? Because from what I gather the error is not describing the actual problem. And of course B) a simple solution? I need those features! :)

  Read the article

• Setting up Live @ EDU

  - by user73721

  [PROBLEM] Hello everyone. I have a small issue here. We are trying to get our exchange accounts for students only ported over from an exchange server 2003 to the Microsoft cloud services known as live @ EDU. The problem we are having is that in order to do this we need to install 2 pieces of software 1: OLSync 2: Microsoft Identity Life cycle Manager "Download the Galsync.msi here" the "Here" link takes you to a page that needs a login for an admin account for live @ EDU. That part works. However once logged in it redirects to a page that states: https://connect.microsoft.com/site185/Downloads/DownloadDetails.aspx?DownloadID=26407 Page Not Found The content that you requested cannot be found or you do not have permission to view it. If you believe you have reached this page in error, click the Help link at the top of the page to report the issue and include this ID in your e-mail: afa16bf4-3df0-437c-893a-8005f978c96c [WHAT I NEED] I need to download that file. Does anyone know of an alternative location for that installation file? I also need to obtain Identity Lifecycle Management (ILM) Server 2007, Feature Pack 1 (FP1). If anyone has any helpful information that would be fantastic! As well if anyone has completed a migration of account from a on site exchange 2003 server to the Microsoft Live @ EDU servers any general guidance would be helpful! Thanks in advance.

  Read the article

• Xorg input devices fail without udev

  - by Sampo

  What I am trying to do: Launch Xorg server without udev device manager. What I have tried to do: Make sure that /dev/ has all required nodes, such as /dev/input/*. Make sure that all required kernel modules are loaded. Launch Xorg. What happens: Xorg starts up as excepted. Xorg loads correct GPU driver and sets right screen resolution. Xorg blocks all input devices (keyboard, mouse), Alt+F[1-12] does not work (can't go back to tty1). Unraw'ing keyboard to take its control from X removes blocking and after unraw I can Alt+F1 back to tty1. Xorg still does not handle any input. Why I think that it should work: Same configuration works well if udev is loaded. Loading udev does not add or modify /dev/ contents, all nodes stays same. My main question is: How to make Xorg input devices work without udev? Any additional information about how Xorg really uses/detects/grabs keyboard would be helpful. And any additional information about what udev really does (other than populating /dev/) would also be helpful.

  Read the article

• Ubuntu: Tar doesn't work correctly

  - by Phuong Nguyen

  It looks like tar is having some problems. I installed Ubuntu 10.04 alpha a few of weeks ago. After that, this alpha version is so terrible that I must switched back to 9.10. So, I backed up all of my profiles data (/home/my_user_name) to my_user_name.tar.gz Here what I did: (in U10.04) Open Nautilus and goto /home/my_user_name Press Ctrl+H to view all hidden files. Press Ctrl+A to select all files Right click and choose [Compress...] Now, when I have set up Ubuntu 9.10 again, I extract the tar using Extract Here command from Nautilus. Funny things happened: Instead of extracting to current folder, the archive manager create a folder named my_user_name and put the extracted content into it. All of the files that I placed directly under /home/my_user_name doesn't get extracted All of the directories that started with . (dot) is not extracted. I wonder if there is any incompatibility between tar in U10.04alpha and U9.10 that cause the problem? Now every of my email, basket data is long gone. I'm freaking right now. Is there anything I can do to get the tar return back my data?

  Read the article

• What applications do people use for windows folder management? How do you switch between folders in

  - by 118184489189799176898

  I'm always switching between client's folders in different applications like photoshop, sql manager, explorer etc. It's so slow to go between them, navigate to the folder and it's still too slow to copy and paste the directory etc. It's so annoying to do. Someone must have a good solution. I was thinking if there was a "recently accessed" folders list available within every folder explorer window... so in any application, if i go "file open" it will have something, somewhere that lists the recently accessed folders - that would be really helpful. I am aware of the recent places folder in win7, but this sucks because it is not sorted by date accessed. Perhaps if there was a way to change this then this would become a decent feature? Is there some application that already does this? i'm sure someone has already solved this issue in a more elegant solution than I can think off. I'm keen to know what programs people use or how people addresss this issue? Thanks...

  Read the article

• my X server doesn't load a module called "glx", but my video drivers seem to be installed

  - by rumtscho

  I just got a new, very wide monitor (2560x1440) and there is no sense maximizing my applications. So I installed Compiz Config Settings Manager and enabled Grid. Nothing happened, the shortcuts don't move application windows. Went to System - Preferences - Appearance, the Visual effects tab. It at "disabled". When I try to set them to "normal" or "extra", a message box appears telling me that it's searching for video drivers, then disappears, and I get an error message "Desktop effects could not be enabled". I opened Xorg.0.log, and had errors there: (EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so (II) UnloadModule: "glx" (EE) Failed to load module "glx" (loader failed, 7) (II) LoadModule: "extmod" Going to Administration - System - Hardware drivers, it said that there are no available and/or installed hardware drivers. But apt-get said that it cannot install nvidia-glx-185, as it is already installed. Googling my error message suggested that I install and run something called envyng. This let me install the nvidia drivers again, and now I can see in the Hardware Drivers window that they are installed and active. But the error message in Xorg.0.log remains, and I still cannot enable the Compiz effects or use Grid. Now, I don't have enough Linux experience to understand if this is a single cause-effect-chain of problems, or three independent ones, but I'd appreciate help for any of them. I am running Ubuntu 9.10, the video card is a GeForce 7600GS.

  Read the article

• Windows 7 XP Mode-Program not ending properly

  - by iceman33

  We currently have recently have implemented a few new machines to our network with Windows 7 Enterprise 64-bit installed on them. We have a program that is incompatible with Windows 7 right now and we have it installed on the Windows XP Mode that we have setup on there. There is a shortcut that is on the desktop to have it work with integration services and that part is working successfully. Occasionally, this program will stop working over the server on which it connects to has to get rebooted and the program has to get closed out. However, that process that is in the task manager doesn't seem to close out properly. So in order to correctly get the program shut down, we have to make the users log back into xp mode and do a Ctrl+Alt+Delete to kill the process or have to go back into the machine to perform a restart. I was wondering if anyone has come across a way within XP Mode yet that when the virtual machine goes into hibernation mode that it would shut down all processes or if when restarting the virtual machine your normal machine that it would shut everything down in the virtual XP mode as well and not just keep that program running? Any help would be greatly appreciated.

  Read the article

• Configure IIS Web Site for alternate Port and receive Access Permission error

  - by Andrew J. Brehm

  When I configure IIS to run a Web site on Port 1414, I get the following error: --------------------------- Internet Information Services (IIS) Manager --------------------------- The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) However, as according to netstat the port is not in use. Completely aside from IIS, I wrote a test program (just to open the port and test it): TcpListener tcpListener; tcpListener = new TcpListener(IPAddress.Any, port); try { tcpListener.Start(); Console.WriteLine("Press \"q\" key to quit."); ConsoleKeyInfo key; do { key = Console.ReadKey(); } while (key.KeyChar != 'q'); } catch (Exception ex) { Console.WriteLine(ex.Message); } tcpListener.Stop(); The result was an exception and the following ex.Message: An attempt was made to access a socket in a way forbidden by its access permissions The port was available but its "access permissions" are not allowing me access. This remains after several restarts. The port is not reserved or in use as far as I know and while IIS says it is in use, netstat and my test program say it is not and my test program receives the error that I am not allowed to access the port. The test program ran elevated. The IIS Site is running MQSeries, but the MQ listener also cannot start on port 1414 because of this issue. A quick search of my registry found nothing interesting for port 1414. What are socket access permissions and how can I correct mine to allow access?

  Read the article

• Problem with mydomain.com no prefix

  - by user10711

  Short question is. I have a domain name mydomain.com, we have a company website hosted on an IIS server 2003 configuration. Going to the address bar and typing www.mydomain.com will show my website properly. Typing mydomain.com into the same address bar will return an under construction website that seems to be hosted on my webserver. My domain name is hosted by Network Solutions, and I think I have it configured correctly using their advanced DNS services. In their settings I have www.mydomain.com, * and @ also pointed to the ip address of my webserver. On my webserver itself using the IIS manager, under the Web Site, and Web Site Identification. I have configured both www.mydomain.com and mydomain.com configured to work on the IP address on the webserver. I am hosting 4 different websites on my IIS server, all the other sites use prefixes other than www, an example is mail.mydomain.com and a couple of others. None of them show an under construction page as their default homepage. I am really at a loss as to why it would show an under construction page, especially since it seems to be pointing to the correct server. The reason this is such a big deal is because when you search for my company on google, the link there is for mydomain.com and by clicking on the link it shows under construction which is really quite embarrassing. Thanks in advance for any help and if there are further questions let me know.

  Read the article

• Windows memory logged on vs logged off

  - by Adi

  Let's say I power on my fresh installed Windows 7 x64 machine. After Windows boots up, there are a bunch of services being started in the background that start allocating memory. Then I enter my user/pass and Windows logs me in. Let's supose I don't do anythig else (I don't explicitely start any application) and I don't have any other app installed by me. So it's fresh install of my machine. My question is: how much memory is needed for all the UI & other stuff? Is it a good indicator to look into task manager and check all the processes started under my user name and sum up all the memory consumed by those processes to get the total amount of memory I am consuming just to stay logged on? Basically this is my question: how much memory is needed just to stay logged on? Now, if log off would all the memory be released back to the system so that the background services can benefit of? Also, I assume that there might be a different discussion for each Windows flavors (?)

  Read the article

• Forward real IP through Haproxy => Nginx => Unicorn

  - by Hendrik

  How do I forward the real visitors ip adress to Unicorn? The current setup is: Haproxy => Nginx => Unicorn How can I forward the real IP address from Haproxy, to Nginx, to Unicorn? Currently it is always only 127.0.0.1 I read that the X headers are going to be depreceated. http://tools.ietf.org/html/rfc6648 - how will this impact us? Haproxy Config: # haproxy config defaults log global mode http option httplog option dontlognull option httpclose retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 # Rails Backend backend deployer-production reqrep ^([^\ ]*)\ /api/(.*) \1\ /\2 balance roundrobin server deployer-production localhost:9000 check Nginx Config: upstream unicorn-production { server unix:/tmp/unicorn.ordify-backend-production.sock fail_timeout=0; } server { listen 9000 default; server_name manager.ordify.localhost; root /home/deployer/apps/ordify-backend-production/current/public; access_log /var/log/nginx/ordify-backend-production_access.log; rewrite_log on; try_files $uri/index.html $uri @unicorn; location @unicorn { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_redirect off; proxy_pass http://unicorn-production; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }

  Read the article

< Previous Page | 744 745 746 747 748 749 750 751 752 753 754 755  | Next Page >