Search Results

Search found 30555 results on 1223 pages for 'closed source'.

Page 788/1223 | < Previous Page | 784 785 786 787 788 789 790 791 792 793 794 795  | Next Page >

• .Net forms - intercepting the Close X event.

  - by Hamish Grubijan

  Hi, this must be a dumb question, but I cannot figure it out. I also cannot use the designer because coders before me managed to throw GUI and logic all in one, so now it is confused. I've got to do it the old school way. I have a Form which can be closed in 3 ways: Close button, File / Close menu, and the X icon. I want them all to do the same thing. Intercepting the button and the menu events is easy. In fact, both are hooked up to an onCloseConfig method. Btw, is there a better name for this method? private void onCloseConfig(object sender, System.EventArgs e) { if (! m_configControl.Modified) { Application.Exit(); // Or should it be this.Close(); } .... // Else present a dialog, ask if they want to save. } So, to intercept the X I tried: this.FormClosing +=new FormClosingEventHandler(this.onCloseConfig); I believe this is what causes an infinite loop. I do not want that :) FormClosed is another option, but it seems too late. I just want to intercept the fact that the X was clicked, not the fact that the form is closing. Please help. Thanks!

  Read the article

• C++ - Totally suspend windows application

  - by HardCoder1986

  Hello! I am developing a simple WinAPI application and started from writing my own assertion system. I have a macro defined like ASSERT(X) which would make pretty the same thing as assert(X) does, but with more information, more options and etc. At some moment (when that assertion system was already running and working) I realized there is a problem. Suppose I wrote a code that does some action using a timer and (just a simple example) this action is done while handling WM_TIMER message. And now, the situation changes the way that this code starts throwing an assert. This assert message would be shown every TIMER_RESOLUTION milliseconds and would simply flood the screen. Options for solving this situation could be: 1) Totally pause application running (probably also, suspend all threads) when the assertion messagebox is shown and continue running after it is closed 2) Make a static counter for the shown asserts and don't show asserts when one of them is already showing (but this doesn't pause application) 3) Group similiar asserts and show only one for each assert type (but this also doesn't pause application) 4) Modify the application code (for example, Get / Translate / Dispatch message loop) so that it suspends itself when there are any asserts. This is good, but not universal and looks like a hack. To my mind, option number 1 is the best. But I don't know any way how this can be achieved. What I'm seeking for is a way to pause the runtime (something similiar to Pause button in the debugger). Does somebody know how to achieve this? Also, if somebody knows an efficient way to handle this problem - I would appreciate your help. Thank you.

  Read the article

• Window manipulation and inctences control

  - by touki

  In my application there are only 2 windows — win_a & win_b, on each of these windows there is button that call another window, e.g. click on btn1 of win_a will call win_b, click on btn2 of win_b will show win_a. Desired behaviour: 1. Only one instance of object is premitted at the same time, e.g. situation, where 2 instances of win_a running at the same time is not permitted. When you click on button that calls windows that already exist this action will only change a focus to needed window. If you call a window that previously had been created, but after this has been closed this action will create a new instance of this window. E.g. there are 2 running windows. you close one of them and after try to call this window back, so related button will create it. How to write it in WPF (XAML + C#). For the moment I wrote a version that can create a lot of instances of the same window (no number of instances control implemented), but I want to see only one instance of the same window, as we can see it in a lot of applications. Example of my code: Window win = new Window(); win.Show(); Thanks.

  Read the article

• Javascript dynamic table memory usage

  - by Dan

  I use a dynamic table: <html> <body> <button id="button">Build table</button> <div id="container"> <script type="text/javascript"> window.onload=function(){ var table = null; var row = "<tr><td>111111111111111111111111111111111111111111111111111111</td>" + "<td>222222222222222222222222222222222222222222222222222222</td>" + "<td>333333333333333333333333333333333333333333333333333333</td></tr>"; var data = null; for (var i = 0; i < 2000; i++){ data += row; } var obj = document.getElementById("button"); obj.onclick=function buildTable(){ document.getElementById("container").innerHTML = "<div><table><tbody>" + data + "</tbody></table></div>"; }; }; </script> </body> </html> Using chromes task manager, each time new data is loaded the memory usage increases considerably and doesn't go down, so after some time the app consumes a lot of memory and requires the browser to be closed. Is there any change in the code I can use to solve this or is it a browser side problem?

  Read the article

• How to learn a new programming language? And how to choose the appropriate language?

  - by Sebi

  Unfortunately my last question was closed, so I reformulated the question: I know this question was here a lot of times and can't be answered at all, but im not looking for a single name, but rather for an advice in my situation. I learned programming with Java and now I'm developing in Java for more or less 5 years (at the university) and I thinks my programming skills their are really ok/average. I have also small experience in C/C++ and C#. Now I have some spare time and I'd like to learn a new language or deepen the knowledge of Java/C/C++. But how to choose the right language to learn? I'd like to learn a language which will be usefull in the future concerning working in a software development business? I know there is no single answer, but I'm sure you could mention some languages that are more usefull than others. And what's the best way to learn such a language efficiently (bearing in mind that one has already learned some other languages)? Just doing tutorials? Or trying to implement a project? Trying to move a Java project to the new language?

  Read the article

• Use external inline script as local function

  - by Aidan

  Had this closed once as a duplicate, yet the so-called duplicate DID NOT actually address my whole question. I have found this script that, when run inline, returns your IP. <script type="text/javascript" src="http://l2.io/ip.js"></script> http://l2.io/ip.js Has nothing more than a line of code that says document.write('123.123.123.123'); (But obviously with the user's IP address) I want to use this IP address as a return string for a function DEFINED EXTERNALLY, BUT STILL ON MY DOMAIN. That is, I have a "scripts.js" that contains all the scripts I wish to use, and I would like to include it in that list as a local function that calls to the 12.io function, but javascript won't allow the < tags, so I am unsure as to how to do this. I.e. function getIP() { return (THAT SCRIPT'S OUTPUT); } This is the topic this was supposedly a duplicate of, and it is very similar. Get ip address with javascript However, this DOES NOT address defining as a forwarded script it in my own script file.

  Read the article

• Having an issue with the "this" modifier...

  - by user344246

  I have this method in City class. It should create a new city based on the object which the method is applied to: public City newCity(string newCityName, int dX, int dY) { City c=new City(this); //based on a constructor : City(City c){} c.CityName=newCityName; c.NoOfNeighborhoods=1; c.NumOfResidents=0; c.CityCenter.Move(dX,dY); return c; } CityCenter is of type "Point" which has two fields - x,y. the Move method in Point class is ment to change the CityCenter location. It looks like this: public void Move(int dX, int dY) { this.X = x + dX; this.Y = y + dY; } What happens is that the new object,c and the existing City object are both changed. I think that "this" modifier works on the existing object too... How can I take advantage of the Move method without causing this behavior? Note: this is a closed API, so I can only add private methods to the project.

  Read the article

• jQuery: Is it possible to assign a DOM element to a variable for later use?

  - by Braxo

  I'm working on a project that is using jQuery, which I'm much more familiar with Mootools. I'll start with my code first. var customNamespace = { status: 'closed', popup: $('#popup'), showPopup: function() { // ... } } $(document).ready(function(){ console.log($('#popup')); console.log(customNamespace.popup); console.log($(customNamespace.popup)); $('#popup').fadeIn('slow'); (customNamespace.popup).fadeIn('slow'); $(customNamespace.popup).fadeIn('slow'); }); My goal is to not have jQuery traverse the DOM everytime I want to do something with the #popup div, so I wanted to save it to a variable to use it throughout my script. When the page loads, the console prints out the object 3 times as I would expect, so I assumed that for each method, the fadeIn would just work. But it doesn't, only $('#popup').fadeIn('slow'); Actually fades in the div. Even if I remove my namespace hash, and just save the object to a global variable, and do a var globalVariable = $('#popup'); . . . globalVariable.fadeIn('slow'); Also does not work as I thought it would. Can jQuery do what I am trying to do?

  Read the article

• Is it wrong for a context (right click) menu be the only way a user can perform a certain task?

  - by Eric

  I'd like to know if it ever makes sense to provide some functionality in a piece of software that is only available to the user through a context (right click) menu. It seems that in most software I've worked with the right click menu is always used as a quick way to get to features that are otherwise available from other buttons or menus. Below is a screen shot of the UI I'm developing. The tree view on the right shows the user's library of catalogs. Users can create new catalogs, or add and remove existing catalogs to and from their library. Catalogs in their library can then be opened or closed, or set to read-only. The screen shot shows the context menu I've created for the browser. Some commands can be executed independently from any specific catalog (New, Add). Yet the other commands must be applied to a specifically selected catalog (Close, Open, Remove, ReadOnly, Refresh, Clean UP, Rename). Currently the "Catalog" menu at the top of the window looks identical to this context menu. Yet I think this may be confusing to the users as the tree view which shows the currently selected catalog may not always be visible. The user may have switched to the Search or Filters tab, or the left pane may be hidden entirely. However, I'm hesitant to change the UI so that the commands that depends on a specifically selected catalog are only available through the context menu.

  Read the article

• Java Daemon Threading with JNI

  - by gwin003

  I have a Java applet that creates a new non-daemon thread like so: Thread childThread = new Thread(new MyRunnable(_this)); childThread.setDaemon(false); childThread.start(); Then my MyRunnable object calls a native method that is implemented in C++: @Override public void run() { while (true) { if (!ran) { System.out.println("isDaemon: " + Thread.currentThread().isDaemon()); _applet.invokePrintManager(_applet.fFormType, _applet.fFormName, _applet.fPrintImmediately, _applet.fDataSet); ran = true; } } } This C++ method calls into a C# DLL that shows a form. My problem is, whenever the user navigates away from the page with a Java applet on it, JVM (and my C# form) is killed. I need the form and JVM to remain open until it is closed by the user. I tried setting my thread to be a non-daemon thread, which is working because System.out.println("isDaemon: " + Thread.currentThread().isDaemon() prints isDaemon: false. Is there something related to the way that the C# form is created (is there another thread I'm not accounting for) or something I am overlooking?? My thread is not a daemon thread, but the JVM is being killed anyways.

  Read the article

• how to create following Java applicatin? [on hold]

  - by Tushar Bichwe

  Write a JAVA program which performs the following listed operations: A. Create a package named MyEmpPackage which consists of following classes A class named Employee which stores information like the Emp number, first name, middle name, last name, address, designation and salary. The class should also contain appropriate get and set methods. 05 A class named AddEmployeeFrame which displays a frame consisting of appropriate controls to enter the details of a Employee and store these details in the Employee class object. The frame should also have three buttons with the caption as “Add Record” and “Delete Record” and “Exit”. 10 A class named MyCustomListener which should work as a user – defined event listener to handle required events as mentioned in following points. 05 B When the “Add Record” button is clicked, the dialog box should be appeared with asking the user “Do you really want to add record in the file”. If the user selects Yes than the record should be saved in the file. 10 When the “Exit” button is clicked, the frame should be closed. 10 [Note: Use the MyCustomListener class only to handle the appropriate events] C The “Delete Record” button should open a new frame which should take input of delete criteria using a radio button. The radio button should provide facility to delete on basis of first name, middle name or last name. 10 The new frame should also have a text box to input the delete criteria value. 10 The record should be deleted from the file and a message dialog should appear with the message that “Record is successfully Deleted”. 10 [Note: Use the MyCustomListener class only to handle the appropriate events] D Provide proper error messages and perform appropriate exceptions where ever required in all the classes 10

  Read the article

• ASP.NET MVC 3 Hosting :: New Features in ASP.NET MVC 3

  - by mbridge

  Razor View Engine The Razor view engine is a new view engine option for ASP.NET MVC that supports the Razor templating syntax. The Razor syntax is a streamlined approach to HTML templating designed with the goal of being a code driven minimalist templating approach that builds on existing C#, VB.NET and HTML knowledge. The result of this approach is that Razor views are very lean and do not contain unnecessary constructs that get in the way of you and your code. ASP.NET MVC 3 Preview 1 only supports C# Razor views which use the .cshtml file extension. VB.NET support will be enabled in later releases of ASP.NET MVC 3. For more information and examples, see Introducing “Razor” – a new view engine for ASP.NET on Scott Guthrie’s blog. Dynamic View and ViewModel Properties A new dynamic View property is available in views, which provides access to the ViewData object using a simpler syntax. For example, imagine two items are added to the ViewData dictionary in the Index controller action using code like the following: public ActionResult Index() {          ViewData["Title"] = "The Title";          ViewData["Message"] = "Hello World!"; } Those properties can be accessed in the Index view using code like this: <h2>View.Title</h2> <p>View.Message</p> There is also a new dynamic ViewModel property in the Controller class that lets you add items to the ViewData dictionary using a simpler syntax. Using the previous controller example, the two values added to the ViewData dictionary can be rewritten using the following code: public ActionResult Index() {     ViewModel.Title = "The Title";     ViewModel.Message = "Hello World!"; } “Add View” Dialog Box Supports Multiple View Engines The Add View dialog box in Visual Studio includes extensibility hooks that allow it to support multiple view engines, as shown in the following figure: Service Location and Dependency Injection Support ASP.NET MVC 3 introduces improved support for applying Dependency Injection (DI) via Inversion of Control (IoC) containers. ASP.NET MVC 3 Preview 1 provides the following hooks for locating services and injecting dependencies: - Creating controller factories. - Creating controllers and setting dependencies. - Setting dependencies on view pages for both the Web Form view engine and the Razor view engine (for types that derive from ViewPage, ViewUserControl, ViewMasterPage, WebViewPage). - Setting dependencies on action filters. Using a Dependency Injection container is not required in order for ASP.NET MVC 3 to function properly. Global Filters ASP.NET MVC 3 allows you to register filters that apply globally to all controller action methods. Adding a filter to the global filters collection ensures that the filter runs for all controller requests. To register an action filter globally, you can make the following call in the Application_Start method in the Global.asax file: GlobalFilters.Filters.Add(new MyActionFilter()); The source of global action filters is abstracted by the new IFilterProvider interface, which can be registered manually or by using Dependency Injection. This allows you to provide your own source of action filters and choose at run time whether to apply a filter to an action in a particular request. New JsonValueProviderFactory Class The new JsonValueProviderFactory class allows action methods to receive JSON-encoded data and model-bind it to an action-method parameter. This is useful in scenarios such as client templating. Client templates enable you to format and display a single data item or set of data items by using a fragment of HTML. ASP.NET MVC 3 lets you connect client templates easily with an action method that both returns and receives JSON data. Support for .NET Framework 4 Validation Attributes and IvalidatableObject The ValidationAttribute class was improved in the .NET Framework 4 to enable richer support for validation. When you write a custom validation attribute, you can use a new IsValid overload that provides a ValidationContext instance. This instance provides information about the current validation context, such as what object is being validated. This change enables scenarios such as validating the current value based on another property of the model. The following example shows a sample custom attribute that ensures that the value of PropertyOne is always larger than the value of PropertyTwo: public class CompareValidationAttribute : ValidationAttribute {     protected override ValidationResult IsValid(object value,              ValidationContext validationContext) {         var model = validationContext.ObjectInstance as SomeModel;         if (model.PropertyOne > model.PropertyTwo) {            return ValidationResult.Success;         }         return new ValidationResult("PropertyOne must be larger than PropertyTwo");     } } Validation in ASP.NET MVC also supports the .NET Framework 4 IValidatableObject interface. This interface allows your model to perform model-level validation, as in the following example: public class SomeModel : IValidatableObject {     public int PropertyOne { get; set; }     public int PropertyTwo { get; set; }     public IEnumerable<ValidationResult> Validate(ValidationContext validationContext) {         if (PropertyOne <= PropertyTwo) {            yield return new ValidationResult(                "PropertyOne must be larger than PropertyTwo");         }     } } New IClientValidatable Interface The new IClientValidatable interface allows the validation framework to discover at run time whether a validator has support for client validation. This interface is designed to be independent of the underlying implementation; therefore, where you implement the interface depends on the validation framework in use. For example, for the default data annotations-based validator, the interface would be applied on the validation attribute. Support for .NET Framework 4 Metadata Attributes ASP.NET MVC 3 now supports .NET Framework 4 metadata attributes such as DisplayAttribute. New IMetadataAware Interface The new IMetadataAware interface allows you to write attributes that simplify how you can contribute to the ModelMetadata creation process. Before this interface was available, you needed to write a custom metadata provider in order to have an attribute provide extra metadata. This interface is consumed by the AssociatedMetadataProvider class, so support for the IMetadataAware interface is automatically inherited by all classes that derive from that class (notably, the DataAnnotationsModelMetadataProvider class). New Action Result Types In ASP.NET MVC 3, the Controller class includes two new action result types and corresponding helper methods. HttpNotFoundResult Action The new HttpNotFoundResult action result is used to indicate that a resource requested by the current URL was not found. The status code is 404. This class derives from HttpStatusCodeResult. The Controller class includes an HttpNotFound method that returns an instance of this action result type, as shown in the following example: public ActionResult List(int id) {     if (id < 0) {                 return HttpNotFound();     }     return View(); } HttpStatusCodeResult Action The new HttpStatusCodeResult action result is used to set the response status code and description. Permanent Redirect The HttpRedirectResult class has a new Boolean Permanent property that is used to indicate whether a permanent redirect should occur. A permanent redirect uses the HTTP 301 status code. Corresponding to this change, the Controller class now has several methods for performing permanent redirects: - RedirectPermanent - RedirectToRoutePermanent - RedirectToActionPermanent These methods return an instance of HttpRedirectResult with the Permanent property set to true. Breaking Changes The order of execution for exception filters has changed for exception filters that have the same Order value. In ASP.NET MVC 2 and earlier, exception filters on the controller with the same Order as those on an action method were executed before the exception filters on the action method. This would typically be the case when exception filters were applied without a specified order Order value. In MVC 3, this order has been reversed in order to allow the most specific exception handler to execute first. As in earlier versions, if the Order property is explicitly specified, the filters are run in the specified order. Known Issues When you are editing a Razor view (CSHTML file), the Go To Controller menu item in Visual Studio will not be available, and there are no code snippets.

  Read the article

• From Binary to Data Structures

  - by Cédric Menzi

  Table of Contents Introduction PE file format and COFF header COFF file header BaseCoffReader Byte4ByteCoffReader UnsafeCoffReader ManagedCoffReader Conclusion History This article is also available on CodeProject Introduction Sometimes, you want to parse well-formed binary data and bring it into your objects to do some dirty stuff with it. In the Windows world most data structures are stored in special binary format. Either we call a WinApi function or we want to read from special files like images, spool files, executables or may be the previously announced Outlook Personal Folders File. Most specifications for these files can be found on the MSDN Libarary: Open Specification In my example, we are going to get the COFF (Common Object File Format) file header from a PE (Portable Executable). The exact specification can be found here: PECOFF PE file format and COFF header Before we start we need to know how this file is formatted. The following figure shows an overview of the Microsoft PE executable format. Source: Microsoft Our goal is to get the PE header. As we can see, the image starts with a MS-DOS 2.0 header with is not important for us. From the documentation we can read "...After the MS DOS stub, at the file offset specified at offset 0x3c, is a 4-byte...". With this information we know our reader has to jump to location 0x3c and read the offset to the signature. The signature is always 4 bytes that ensures that the image is a PE file. The signature is: PE\0\0. To prove this we first seek to the offset 0x3c, read if the file consist the signature. So we need to declare some constants, because we do not want magic numbers.   private const int PeSignatureOffsetLocation = 0x3c; private const int PeSignatureSize = 4; private const string PeSignatureContent = "PE";   Then a method for moving the reader to the correct location to read the offset of signature. With this method we always move the underlining Stream of the BinaryReader to the start location of the PE signature.   private void SeekToPeSignature(BinaryReader br) { // seek to the offset for the PE signagure br.BaseStream.Seek(PeSignatureOffsetLocation, SeekOrigin.Begin); // read the offset int offsetToPeSig = br.ReadInt32(); // seek to the start of the PE signature br.BaseStream.Seek(offsetToPeSig, SeekOrigin.Begin); }   Now, we can check if it is a valid PE image by reading of the next 4 byte contains the content PE.   private bool IsValidPeSignature(BinaryReader br) { // read 4 bytes to get the PE signature byte[] peSigBytes = br.ReadBytes(PeSignatureSize); // convert it to a string and trim \0 at the end of the content string peContent = Encoding.Default.GetString(peSigBytes).TrimEnd('\0'); // check if PE is in the content return peContent.Equals(PeSignatureContent); }   With this basic functionality we have a good base reader class to try the different methods of parsing the COFF file header. COFF file header The COFF header has the following structure: Offset Size Field 0 2 Machine 2 2 NumberOfSections 4 4 TimeDateStamp 8 4 PointerToSymbolTable 12 4 NumberOfSymbols 16 2 SizeOfOptionalHeader 18 2 Characteristics If we translate this table to code, we get something like this:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public MachineType Machine; public ushort NumberOfSections; public uint TimeDateStamp; public uint PointerToSymbolTable; public uint NumberOfSymbols; public ushort SizeOfOptionalHeader; public Characteristic Characteristics; } BaseCoffReader All readers do the same thing, so we go to the patterns library in our head and see that Strategy pattern or Template method pattern is sticked out in the bookshelf. I have decided to take the template method pattern in this case, because the Parse() should handle the IO for all implementations and the concrete parsing should done in its derived classes.   public CoffHeader Parse() { using (var br = new BinaryReader(File.Open(_fileName, FileMode.Open, FileAccess.Read, FileShare.Read))) { SeekToPeSignature(br); if (!IsValidPeSignature(br)) { throw new BadImageFormatException(); } return ParseInternal(br); } } protected abstract CoffHeader ParseInternal(BinaryReader br);   First we open the BinaryReader, seek to the PE signature then we check if it contains a valid PE signature and rest is done by the derived implementations. Byte4ByteCoffReader The first solution is using the BinaryReader. It is the general way to get the data. We only need to know which order, which data-type and its size. If we read byte for byte we could comment out the first line in the CoffHeader structure, because we have control about the order of the member assignment.   protected override CoffHeader ParseInternal(BinaryReader br) { CoffHeader coff = new CoffHeader(); coff.Machine = (MachineType)br.ReadInt16(); coff.NumberOfSections = (ushort)br.ReadInt16(); coff.TimeDateStamp = br.ReadUInt32(); coff.PointerToSymbolTable = br.ReadUInt32(); coff.NumberOfSymbols = br.ReadUInt32(); coff.SizeOfOptionalHeader = (ushort)br.ReadInt16(); coff.Characteristics = (Characteristic)br.ReadInt16(); return coff; }   If the structure is as short as the COFF header here and the specification will never changed, there is probably no reason to change the strategy. But if a data-type will be changed, a new member will be added or ordering of member will be changed the maintenance costs of this method are very high. UnsafeCoffReader Another way to bring the data into this structure is using a "magically" unsafe trick. As above, we know the layout and order of the data structure. Now, we need the StructLayout attribute, because we have to ensure that the .NET Runtime allocates the structure in the same order as it is specified in the source code. We also need to enable "Allow unsafe code (/unsafe)" in the project's build properties. Then we need to add the following constructor to the CoffHeader structure.   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { unsafe { fixed (byte* packet = &data[0]) { this = *(CoffHeader*)packet; } } } }   The "magic" trick is in the statement: this = *(CoffHeader*)packet;. What happens here? We have a fixed size of data somewhere in the memory and because a struct in C# is a value-type, the assignment operator = copies the whole data of the structure and not only the reference. To fill the structure with data, we need to pass the data as bytes into the CoffHeader structure. This can be achieved by reading the exact size of the structure from the PE file.   protected override CoffHeader ParseInternal(BinaryReader br) { return new CoffHeader(br.ReadBytes(Marshal.SizeOf(typeof(CoffHeader)))); }   This solution is the fastest way to parse the data and bring it into the structure, but it is unsafe and it could introduce some security and stability risks. ManagedCoffReader In this solution we are using the same approach of the structure assignment as above. But we need to replace the unsafe part in the constructor with the following managed part:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { IntPtr coffPtr = IntPtr.Zero; try { int size = Marshal.SizeOf(typeof(CoffHeader)); coffPtr = Marshal.AllocHGlobal(size); Marshal.Copy(data, 0, coffPtr, size); this = (CoffHeader)Marshal.PtrToStructure(coffPtr, typeof(CoffHeader)); } finally { Marshal.FreeHGlobal(coffPtr); } } }     Conclusion We saw that we can parse well-formed binary data to our data structures using different approaches. The first is probably the clearest way, because we know each member and its size and ordering and we have control about the reading the data for each member. But if add member or the structure is going change by some reason, we need to change the reader. The two other solutions use the approach of the structure assignment. In the unsafe implementation we need to compile the project with the /unsafe option. We increase the performance, but we get some security risks.

  Read the article

• Windows 7 Phone Database – Querying with Views and Filters

  - by SeanMcAlinden

  I’ve just added a feature to Rapid Repository to greatly improve how the Windows 7 Phone Database is queried for performance (This is in the trunk not in Release V1.0). The main concept behind it is to create a View Model class which would have only the minimum data you need for a page. This View Model is then stored and retrieved rather than the whole list of entities. Another feature of the views is that they can be pre-filtered to even further improve performance when querying. You can download the source from the Microsoft Codeplex site http://rapidrepository.codeplex.com/. Setting up a view Lets say you have an entity that stores lots of data about a game result for example: GameScore entity public class GameScore : IRapidEntity {     public Guid Id { get; set; }     public string GamerId {get;set;}     public string Name { get; set; }     public Double Score { get; set; }     public Byte[] ThumbnailAvatar { get; set; }     public DateTime DateAdded { get; set; } }   On your page you want to display a list of scores but you only want to display the score and the date added, you create a View Model for displaying just those properties. GameScoreView public class GameScoreView : IRapidView {     public Guid Id { get; set; }     public Double Score { get; set; }     public DateTime DateAdded { get; set; } }   Now you have the view model, the first thing to do is set up the view at application start up. This is done using the following syntax. View Setup public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score }); } As you can see, using a little bit of lambda syntax, you put in the code for constructing a single view, this is used internally for mapping an entity to a view. *Note* you do not need to map the Id property, this is done automatically, a view model id will always be the same as it’s corresponding entity.   Adding Filters One of the cool features of the view is that you can add filters to limit the amount of data stored in the view, this will dramatically improve performance. You can add multiple filters using the fluent syntax if required. In this example, lets say that you will only ever show the scores for the last 10 days, you could add a filter like the following: Add single filter public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score })         .AddFilter(x => x.DateAdded > DateTime.Now.AddDays(-10)); } If you wanted to further limit the data, you could also say only scores above 100: Add multiple filters public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score })         .AddFilter(x => x.DateAdded > DateTime.Now.AddDays(-10))         .AddFilter(x => x.Score > 100); }   Querying the view model So the important part is how to query the data. This is done using the repository, there is a method called Query which accepts the type of view as a generic parameter (you can have multiple View Model types per entity type) You can either use the result of the query method directly or perform further querying on the result is required. Querying the View public void DisplayScores() {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     List<GameScoreView> scores = repository.Query<GameScoreView>();       // display logic } Further Filtering public void TodaysScores() {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     List<GameScoreView> todaysScores = repository.Query<GameScoreView>().Where(x => x.DateAdded > DateTime.Now.AddDays(-1)).ToList();       // display logic }   Retrieving the actual entity Retrieving the actual entity can be done easily by using the GetById method on the repository. Say for example you allow the user to click on a specific score to get further information, you can use the Id populated in the returned View Model GameScoreView and use it directly on the repository to retrieve the full entity. Get Full Entity public void GetFullEntity(Guid gameScoreViewId) {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     GameScore fullEntity = repository.GetById(gameScoreViewId);       // display logic } Synchronising The View If you are upgrading from Rapid Repository V1.0 and are likely to have data in the repository already, you will need to perform a synchronisation to ensure the views and entities are fully in sync. You can either do this as a one off during the application upgrade or if you are a little more cautious, you could run this at each application start up. Synchronise the view public void MyUpgradeTasks() {     RapidRepository<GameScore>.SynchroniseView<GameScoreView>(); } It’s worth noting that in normal operation, the view keeps itself in sync with the entities so this is only really required if you are upgrading from V1.0 to V2.0 when it gets released shortly.   Summary I really hope you like this feature, it will be great for performance and I believe supports good practice by promoting the use of View Models for specific pages. I’m hoping to produce a beta for this over the next few days, I just want to add some more tests and hopefully iron out any bugs. I would really appreciate any thoughts on this feature and would really love to know of any bugs you find. You can download the source from the following : http://rapidrepository.codeplex.com/ Kind Regards, Sean McAlinden.

  Read the article

• Ajax Control Toolkit and Superexpert

  - by Stephen Walther

  Microsoft has asked my company, Superexpert Consulting, to take ownership of the development and maintenance of the Ajax Control Toolkit moving forward. In this blog entry, I discuss our strategy for improving the Ajax Control Toolkit. Why the Ajax Control Toolkit? The Ajax Control Toolkit is one of the most popular projects on CodePlex. In fact, some have argued that it is among the most successful open-source projects of all time. It consistently receives over 3,500 downloads a day (not weekends -- workdays). A mind-boggling number of developers use the Ajax Control Toolkit in their ASP.NET Web Forms applications. Why does the Ajax Control Toolkit continue to be such a popular project? The Ajax Control Toolkit fills a strong need in the ASP.NET Web Forms world. The Toolkit enables Web Forms developers to build richly interactive JavaScript applications without writing any JavaScript. For example, by taking advantage of the Ajax Control Toolkit, a Web Forms developer can add modal dialogs, popup calendars, and client tabs to a web application simply by dragging web controls onto a page. The Ajax Control Toolkit is not for everyone. If you are comfortable writing JavaScript then I recommend that you investigate using jQuery plugins instead of the Ajax Control Toolkit. However, if you are a Web Forms developer and you don’t want to get your hands dirty writing JavaScript, then the Ajax Control Toolkit is a great solution. The Ajax Control Toolkit is Vast The Ajax Control Toolkit consists of 40 controls. That’s a lot of controls (For the sake of comparison, jQuery UI consists of only 8 controls – those slackers J). Furthermore, developers expect the Ajax Control Toolkit to work on browsers both old and new. For example, people expect the Ajax Control Toolkit to work with Internet Explorer 6 and Internet Explorer 9 and every version of Internet Explorer in between. People also expect the Ajax Control Toolkit to work on the latest versions of Mozilla Firefox, Apple Safari, and Google Chrome. And, people expect the Ajax Control Toolkit to work with different operating systems. Yikes, that is a lot of combinations. The biggest challenge which my company faces in supporting the Ajax Control Toolkit is ensuring that the Ajax Control Toolkit works across all of these different browsers and operating systems. Testing, Testing, Testing Because we wanted to ensure that we could easily test the Ajax Control Toolkit with different browsers, the very first thing that we did was to set up a dedicated testing server. The dedicated server -- named Schizo -- hosts 4 virtual machines so that we can run Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, and Internet Explorer 9 at the same time (We also use the virtual machines to host the latest versions of Firefox, Chrome, Opera, and Safari). The five developers on our team (plus me) can each publish to a separate FTP website on the testing server. That way, we can quickly test how changes to the Ajax Control Toolkit affect different browsers. QUnit Tests for the Ajax Control Toolkit Introducing regressions – introducing new bugs when trying to fix existing bugs – is the concern which prevents me from sleeping well at night. There are so many people using the Ajax Control Toolkit in so many unique scenarios, that it is difficult to make improvements to the Ajax Control Toolkit without introducing regressions. In order to avoid regressions, we decided early on that it was extremely important to build good test coverage for the 40 controls in the Ajax Control Toolkit. We’ve been focusing a lot of energy on building automated JavaScript unit tests which we can use to help us discover regressions. We decided to write the unit tests with the QUnit test framework. We picked QUnit because it is quickly becoming the standard unit testing framework in the JavaScript world. For example, it is the unit testing framework used by the jQuery team, the jQuery UI team, and many jQuery UI plugin developers. We had to make several enhancements to the QUnit framework in order to test the Ajax Control Toolkit. For example, QUnit does not support tests which include postbacks. We modified the QUnit framework so that it works with IFrames so we could perform postbacks in our automated tests. At this point, we have written hundreds of QUnit tests. For example, we have written 135 QUnit tests for the Accordion control. The QUnit tests are included with the Ajax Control Toolkit source code in a project named AjaxControlToolkit.Tests. You can run all of the QUnit tests contained in the project by opening the Default.aspx page. Automating the QUnit Tests across Multiple Browsers Automated tests are useless if no one ever runs them. In order for the QUnit tests to be useful, we needed an easy way to run the tests automatically against a matrix of browsers. We wanted to run the unit tests against Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, Firefox, Chrome, and Safari automatically. Expecting a developer to run QUnit tests against every browser after every check-in is just too much to expect. It takes 20 seconds to run the Accordion QUnit tests. We are testing against 8 browsers. That would require the developer to open 8 browsers and wait for the results after each change in code. Too much work. Therefore, we built a JavaScript Test Server. Our JavaScript Test Server project was inspired by John Resig’s TestSwarm project. The JavaScript Test Server runs our QUnit tests in a swarm of browsers (running on different operating systems) automatically. Here’s how the JavaScript Test Server works: 1. We created an ASP.NET page named RunTest.aspx that constantly polls the JavaScript Test Server for a new set of QUnit tests to run. After the RunTest.aspx page runs the QUnit tests, the RunTest.aspx records the test results back to the JavaScript Test Server. 2. We opened the RunTest.aspx page on instances of Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, FireFox, Chrome, Opera, Google, and Safari. Now that we have the JavaScript Test Server setup, we can run all of our QUnit tests against all of the browsers which we need to support with a single click of a button. A New Release of the Ajax Control Toolkit Each Month The Ajax Control Toolkit Issue Tracker contains over one thousand five hundred open issues and feature requests. So we have plenty of work on our plates J At CodePlex, anyone can vote for an issue to be fixed. Originally, we planned to fix issues in order of their votes. However, we quickly discovered that this approach was inefficient. Constantly switching back and forth between different controls was too time-consuming. It takes time to re-familiarize yourself with a control. Instead, we decided to focus on two or three controls each month and really focus on fixing the issues with those controls. This way, we can fix sets of related issues and avoid the randomization caused by context switching. Our team works in monthly sprints. We plan to do another release of the Ajax Control Toolkit each and every month. So far, we have competed one release of the Ajax Control Toolkit which was released on April 1, 2011. We plan to release a new version in early May. Conclusion Fortunately, I work with a team of smart developers. We currently have 5 developers working on the Ajax Control Toolkit (not full-time, they are also building two very cool ASP.NET MVC applications). All the developers who work on our team are required to have strong JavaScript, jQuery, and ASP.NET MVC skills. In the interest of being as transparent as possible about our work on the Ajax Control Toolkit, I plan to blog frequently about our team’s ongoing work. In my next blog entry, I plan to write about the two Ajax Control Toolkit controls which are the focus of our work for next release.

  Read the article

• Using jQuery and OData to Insert a Database Record

  - by Stephen Walther

  In my previous blog entry, I explored two ways of inserting a database record using jQuery. We added a new Movie to the Movie database table by using a generic handler and by using a WCF service. In this blog entry, I want to take a brief look at how you can insert a database record using OData. Introduction to OData The Open Data Protocol (OData) was developed by Microsoft to be an open standard for communicating data across the Internet. Because the protocol is compatible with standards such as REST and JSON, the protocol is particularly well suited for Ajax. OData has undergone several name changes. It was previously referred to as Astoria and ADO.NET Data Services. OData is used by Sharepoint Server 2010, Azure Storage Services, Excel 2010, SQL Server 2008, and project code name “Dallas.” Because OData is being adopted as the public interface of so many important Microsoft technologies, it is a good protocol to learn. You can learn more about OData by visiting the following websites: http://www.odata.org http://msdn.microsoft.com/en-us/data/bb931106.aspx When using the .NET framework, you can easily expose database data through the OData protocol by creating a WCF Data Service. In this blog entry, I will create a WCF Data Service that exposes the Movie database table. Create the Database and Data Model The MoviesDB database is a simple database that contains the following Movies table: You need to create a data model to represent the MoviesDB database. In this blog entry, I use the ADO.NET Entity Framework to create my data model. However, WCF Data Services and OData are not tied to any particular OR/M framework such as the ADO.NET Entity Framework. For details on creating the Entity Framework data model for the MoviesDB database, see the previous blog entry. Create a WCF Data Service You create a new WCF Service by selecting the menu option Project, Add New Item and selecting the WCF Data Service item template (see Figure 1). Name the new WCF Data Service MovieService.svc. Figure 1 – Adding a WCF Data Service Listing 1 contains the default code that you get when you create a new WCF Data Service. There are two things that you need to modify. Listing 1 – New WCF Data Service File using System; using System.Collections.Generic; using System.Data.Services; using System.Data.Services.Common; using System.Linq; using System.ServiceModel.Web; using System.Web; namespace WebApplication1 { public class MovieService : DataService< /* TODO: put your data source class name here */ > { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { // TODO: set rules to indicate which entity sets and service operations are visible, updatable, etc. // Examples: // config.SetEntitySetAccessRule("MyEntityset", EntitySetRights.AllRead); // config.SetServiceOperationAccessRule("MyServiceOperation", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } } First, you need to replace the comment /* TODO: put your data source class name here */ with a class that represents the data that you want to expose from the service. In our case, we need to replace the comment with a reference to the MoviesDBEntities class generated by the Entity Framework. Next, you need to configure the security for the WCF Data Service. By default, you cannot query or modify the movie data. We need to update the Entity Set Access Rule to enable us to insert a new database record. The updated MovieService.svc is contained in Listing 2: Listing 2 – MovieService.svc using System.Data.Services; using System.Data.Services.Common; namespace WebApplication1 { public class MovieService : DataService<MoviesDBEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Movies", EntitySetRights.AllWrite); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } } That’s all we have to do. We can now insert a new Movie into the Movies database table by posting a new Movie to the following URL: /MovieService.svc/Movies The request must be a POST request. The Movie must be represented as JSON. Using jQuery with OData The HTML page in Listing 3 illustrates how you can use jQuery to insert a new Movie into the Movies database table using the OData protocol. Listing 3 – Default.htm <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>jQuery OData Insert</title> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/json2.js" type="text/javascript"></script> </head> <body> <form> <label>Title:</label> <input id="title" /> <br /> <label>Director:</label> <input id="director" /> </form> <button id="btnAdd">Add Movie</button> <script type="text/javascript"> $("#btnAdd").click(function () { // Convert the form into an object var data = { Title: $("#title").val(), Director: $("#director").val() }; // JSONify the data var data = JSON.stringify(data); // Post it $.ajax({ type: "POST", contentType: "application/json; charset=utf-8", url: "MovieService.svc/Movies", data: data, dataType: "json", success: insertCallback }); }); function insertCallback(result) { // unwrap result var newMovie = result["d"]; // Show primary key alert("Movie added with primary key " + newMovie.Id); } </script> </body> </html> jQuery does not include a JSON serializer. Therefore, we need to include the JSON2 library to serialize the new Movie that we wish to create. The Movie is serialized by calling the JSON.stringify() method: var data = JSON.stringify(data); You can download the JSON2 library from the following website: http://www.json.org/js.html The jQuery ajax() method is called to insert the new Movie. Notice that both the contentType and dataType are set to use JSON. The jQuery ajax() method is used to perform a POST operation against the URL MovieService.svc/Movies. Because the POST payload contains a JSON representation of a new Movie, a new Movie is added to the database table of Movies. When the POST completes successfully, the insertCallback() method is called. The new Movie is passed to this method. The method simply displays the primary key of the new Movie: Summary The OData protocol (and its enabling technology named WCF Data Services) works very nicely with Ajax. By creating a WCF Data Service, you can quickly expose your database data to an Ajax application by taking advantage of open standards such as REST, JSON, and OData. In the next blog entry, I want to take a closer look at how the OData protocol supports different methods of querying data.

  Read the article

• Enabling Kerberos Authentication for Reporting Services

  - by robcarrol

  Recently, I’ve helped several customers with Kerberos authentication problems with Reporting Services and Analysis Services, so I’ve decided to write this blog post and pull together some useful resources in one place (there are 2 whitepapers in particular that I found invaluable configuring Kerberos authentication, and these can be found in the references section at the bottom of this post). In most of these cases, the problem has manifested itself with the Login failed for User ‘NT Authority\Anonymous’ (“double-hop”) error. By default, Reporting Services uses Windows Integrated Authentication, which includes the Kerberos and NTLM protocols for network authentication. Additionally, Windows Integrated Authentication includes the negotiate security header, which prompts the client to select Kerberos or NTLM for authentication. The client can access reports which have the appropriate permissions by using Kerberos for authentication. Servers that use Kerberos authentication can impersonate those clients and use their security context to access network resources. You can configure Reporting Services to use both Kerberos and NTLM authentication; however this may lead to a failure to authenticate. With negotiate, if Kerberos cannot be used, the authentication method will default to NTLM. When negotiate is enabled, the Kerberos protocol is always used except when: Clients/servers that are involved in the authentication process cannot use Kerberos. The client does not provide the information necessary to use Kerberos. An in-depth discussion of Kerberos authentication is beyond the scope of this post, however when users execute reports that are configured to use Windows Integrated Authentication, their logon credentials are passed from the report server to the server hosting the data source. Delegation needs to be set on the report server and Service Principle Names (SPNs) set for the relevant services. When a user processes a report, the request must go through a Web server on its way to a database server for processing. Kerberos authentication enables the Web server to request a service ticket from the domain controller; impersonate the client when passing the request to the database server; and then restrict the request based on the user’s permissions. Each time a server is required to pass the request to another server, the same process must be used. Kerberos authentication is supported in both native and SharePoint integrated mode, but I’ll focus on native mode for the purpose of this post (I’ll explain configuring SharePoint integrated mode and Kerberos authentication in a future post). Configuring Kerberos avoids the authentication failures due to double-hop issues. These double-hop errors occur when a users windows domain credentials can’t be passed to another server to complete the user’s request. In the case of my customers, users were executing Reporting Services reports that were configured to query Analysis Services cubes on a separate machine using Windows Integrated security. The double-hop issue occurs as NTLM credentials are valid for only one network hop, subsequent hops result in anonymous authentication. The client attempts to connect to the report server by making a request from a browser (or some other application), and the connection process begins with authentication. With NTLM authentication, client credentials are presented to Computer 2. However Computer 2 can’t use the same credentials to access Computer 3 (so we get the Anonymous login error). To access Computer 3 it is necessary to configure the connection string with stored credentials, which is what a number of customers I have worked with have done to workaround the double-hop authentication error. However, to get the benefits of Windows Integrated security, a better solution is to enable Kerberos authentication. Again, the connection process begins with authentication. With Kerberos authentication, the client and the server must demonstrate to one another that they are genuine, at which point authentication is successful and a secure client/server session is established. In the illustration above, the tiers represent the following: Client tier (computer 1): The client computer from which an application makes a request. Middle tier (computer 2): The Web server or farm where the client’s request is directed. Both the SharePoint and Reporting Services server(s) comprise the middle tier (but we’re only concentrating on native deployments just now). Back end tier (computer 3): The Database/Analysis Services server/Cluster where the requested data is stored. In order to enable Kerberos authentication for Reporting Services it’s necessary to configure the relevant SPNs, configure trust for delegation for server accounts, configure Kerberos with full delegation and configure the authentication types for Reporting Services. Service Principle Names (SPNs) are unique identifiers for services and identify the account’s type of service. If an SPN is not configured for a service, a client account will be unable to authenticate to the servers using Kerberos. You need to be a domain administrator to add an SPN, which can be added using the SetSPN utility. For Reporting Services in native mode, the following SPNs need to be registered --SQL Server Service SETSPN -S mssqlsvc/servername:1433 Domain\SQL For named instances, or if the default instance is running under a different port, then the specific port number should be used. --Reporting Services Service SETSPN -S http/servername Domain\SSRS SETSPN -S http/servername.domain.com Domain\SSRS The SPN should be set for the NETBIOS name of the server and the FQDN. If you access the reports using a host header or DNS alias, then that should also be registered SETSPN -S http/www.reports.com Domain\SSRS --Analysis Services Service SETSPN -S msolapsvc.3/servername Domain\SSAS Next, you need to configure trust for delegation, which refers to enabling a computer to impersonate an authenticated user to services on another computer: Location Description Client 1. The requesting application must support the Kerberos authentication protocol. 2. The user account making the request must be configured on the domain controller. Confirm that the following option is not selected: Account is sensitive and cannot be delegated. Servers 1. The service accounts must be trusted for delegation on the domain controller. 2. The service accounts must have SPNs registered on the domain controller. If the service account is a domain user account, the domain administrator must register the SPNs. In Active Directory Users and Computers, verify that the domain user accounts used to access reports have been configured for delegation (the ‘Account is sensitive and cannot be delegated’ option should not be selected): We then need to configure the Reporting Services service account and computer to use Kerberos with full delegation:   We also need to do the same for the SQL Server or Analysis Services service accounts and computers (depending on what type of data source you are connecting to in your reports). Finally, and this is the part that sometimes gets over-looked, we need to configure the authentication type correctly for reporting services to use Kerberos authentication. This is configured in the Authentication section of the RSReportServer.config file on the report server. <Authentication> <AuthenticationTypes>           <RSWindowsNegotiate/> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> </Authentication> This will enable Kerberos authentication for Internet Explorer. For other browsers, see the link below. The report server instance must be restarted for these changes to take effect. Once these changes have been made, all that’s left to do is test to make sure Kerberos authentication is working properly by running a report from report manager that is configured to use Windows Integrated authentication (either connecting to Analysis Services or SQL Server back-end). Resources: Manage Kerberos Authentication Issues in a Reporting Services Environment http://download.microsoft.com/download/B/E/1/BE1AABB3-6ED8-4C3C-AF91-448AB733B1AF/SSRSKerberos.docx Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23176 How to: Configure Windows Authentication in Reporting Services http://msdn.microsoft.com/en-us/library/cc281253.aspx RSReportServer Configuration File http://msdn.microsoft.com/en-us/library/ms157273.aspx#Authentication Planning for Browser Support http://msdn.microsoft.com/en-us/library/ms156511.aspx

  Read the article

• TFS 2010 Basic Concepts

  - by jehan

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here, I’m going to discuss some key Architectural changes and concepts that have taken place in TFS 2010 when compared to TFS 2008. In TFS 2010 Installation, First you need to do the Installation and then you have to configure the Installation Feature from the available features. This is bit similar to SharePoint Installation, where you will first do the Installation and then configure the SharePoint Farms. 1) Installation Features available in TFS2010: a) Basic: It is the most compact TFS installation possible. It will install and configure Source Control, Work Item tracking and Build Services only. (SharePoint and Reporting Integration will not be possible). b) Standard Single Server: This is suitable for Single Server deployment of TFS. It will install and configure Windows SharePoint Services for you and will use the default instance of SQL Server. c) Advanced: It is suitable, if you want use Remote Servers for SQL Server Databases, SharePoint Products and Technologies and SQL Server Reporting Services. d) Application Tier Only: If you want to configure high availability for Team Foundation Server in a Load Balanced Environment (NLB) or you want to move Team Foundation Server from one server to other or you want to restore TFS. e) Upgrade: If you want to upgrade from a prior version of TFS. Note: One more important thing to know here about  TFS 2010 Basic is that,  it can be installed on Client Operations Systems(Windows 7 and Windows Vista SP3), Where as  earlier you cannot Install previous version of TFS (2008 and 2005) on client OS. 2) Team Project Collections: Connect to TFS dialog box in TFS 2008:  In TFS 2008, the TFS Server contains a set of Team Projects and each project may or may not be independent of other projects and every checkin gets a ever increasing  changeset ID  irrespective of the team project in which it is checked in and the same applies to work items  also, who also gets unique Work Item Ids.The main problem with this approach was that there are certain things which were impossible to do; those were required as per the Application Development Process. a)      If something has gone wrong in one team project and now you want to restore it back to earlier state where it was working properly then it requires you to restore the Database of Team Foundation Server from the backup you have taken as per your Maintenance plans and because of this the other team projects may lose out on the work which is not backed up. b)       Your company had a merge with some other company and now you have two TFS servers. One TFS Server which you are working on and other TFS server which other company was working and now after the merge you want to integrate the team projects from two TFS servers into one, which is almost impossible to achieve in TFS 2008. Though you can create the Team Projects in one server manually (In Source Control) which you want to integrate from the other TFS Server, but will lose out on History of Change Sets and Work items and others which are very important. There were few more issues of this sort, which were difficult to resolve in TFS 2008. To resolve issues related to above kind of scenarios which were mainly related TFS Maintenance, Integration, migration and Security,  Microsoft has come up with Team Project Collections concept in TFS 2010.This concept is similar to SharePoint Site Collections and if you are familiar with SharePoint Architecture, then it will help you to understand TFS 2010 Architecture easily. Connect to TFS dialog box in TFS 2010: In above dialog box as you can see there are two Team Project Collections, each team project can contain any number of team projects as you can see on right side it shows the two Team Projects in Team Project Collection (Default Collection) which I have chosen. Note: You can connect to only one Team project Collection at a time using an instance of  TFS Team Explorer. How does it work? To introduce Team Project Collections, changes have been done in reorganization of TFS databases. TFS 2008 was composed of 5-7 databases partitioned by subsystem (each for Version Control, Work Item Tracking, Build, Integration, Project Management...) New TFS 2010 database architecture: TFS_Config: It’s the root database and it contains centralized TFS configuration data, including the list of all team projects exist in TFS server. TFS_Warehouse: The data warehouse contains all the reporting data of served by this server (farm). TFS_* : This contains individual team project collection data. This database contains all the operational data of team project collection regardless of subsystem.In additional to this, you will have databases for SharePoint and Report Server. 3) TFS Farms:  As TFS 2010 is more flexible to configure as multiple Application tiers and multiple Database tiers, so it will be more appropriate to call as TFS Farm if you going for multi server installation of TFS. NLB support for TFS application tiers – With TFS 2010: you can configure multiple TFS application tier machines to serve the same set of Team Project Collections. The primary purpose of NLB support is to enable a cleaner and more complete high availability than in TFS 2008. Even if any application tier in the farm fails then farm will automatically continue to work with hardly any indication to end users of a problem. SQL data tiers: With 2010 you can configure many SQL Servers. Each Database can be configured to be on any SQL Server because each Team Project Collection is an independent database. This feature can also be used to load balance databases across SQL Servers.These new capabilities will significantly change the way enterprises manage their TFS installations in the future. With Team Project Collections and TFS farms, you can create a single, arbitrarily large TFS installation. You can grow it incrementally by adding ATs and SQL Servers as needed.

  Read the article

• Dependency Injection in ASP.NET Web API using Autofac

  - by shiju

  In this post, I will demonstrate how to use Dependency Injection in ASP.NET Web API using Autofac in an ASP.NET MVC 4 app. The new ASP.NET Web API is a great framework for building HTTP services. The Autofac IoC container provides the better integration with ASP.NET Web API for applying dependency injection. The NuGet package Autofac.WebApi provides the  Dependency Injection support for ASP.NET Web API services. Using Autofac in ASP.NET Web API The following command in the Package Manager console will install Autofac.WebApi package into your ASP.NET Web API application. PM > Install-Package Autofac.WebApi The following code block imports the necessary namespaces for using Autofact.WebApi using Autofac; using Autofac.Integration.WebApi; .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The following code in the Bootstrapper class configures the Autofac. 1: public static class Bootstrapper 2: { 3: public static void Run() 4: { 5: SetAutofacWebAPI(); 6: } 7: private static void SetAutofacWebAPI() 8: { 9: var configuration = GlobalConfiguration.Configuration; 10: var builder = new ContainerBuilder(); 11: // Configure the container 12: builder.ConfigureWebApi(configuration); 13: // Register API controllers using assembly scanning. 14: builder.RegisterApiControllers(Assembly.GetExecutingAssembly()); 15: builder.RegisterType<DefaultCommandBus>().As<ICommandBus>() 16: .InstancePerApiRequest(); 17: builder.RegisterType<UnitOfWork>().As<IUnitOfWork>() 18: .InstancePerApiRequest(); 19: builder.RegisterType<DatabaseFactory>().As<IDatabaseFactory>() 20: .InstancePerApiRequest(); 21: builder.RegisterAssemblyTypes(typeof(CategoryRepository) 22: .Assembly).Where(t => t.Name.EndsWith("Repository")) 23: .AsImplementedInterfaces().InstancePerApiRequest(); 24: var services = Assembly.Load("EFMVC.Domain"); 25: builder.RegisterAssemblyTypes(services) 26: .AsClosedTypesOf(typeof(ICommandHandler<>)) 27: .InstancePerApiRequest(); 28: builder.RegisterAssemblyTypes(services) 29: .AsClosedTypesOf(typeof(IValidationHandler<>)) 30: .InstancePerApiRequest(); 31: var container = builder.Build(); 32: // Set the WebApi dependency resolver. 33: var resolver = new AutofacWebApiDependencyResolver(container); 34: configuration.ServiceResolver.SetResolver(resolver); 35: } 36: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The RegisterApiControllers method will scan the given assembly and register the all ApiController classes. This method will look for types that derive from IHttpController with name convention end with “Controller”. The InstancePerApiRequest method specifies the life time of the component for once per API controller invocation. The GlobalConfiguration.Configuration provides a ServiceResolver class which can be use set dependency resolver for ASP.NET Web API. In our example, we are using AutofacWebApiDependencyResolver class provided by Autofac.WebApi to set the dependency resolver. The Run method of Bootstrapper class is calling from Application_Start method of Global.asax.cs. 1: protected void Application_Start() 2: { 3: AreaRegistration.RegisterAllAreas(); 4: RegisterGlobalFilters(GlobalFilters.Filters); 5: RegisterRoutes(RouteTable.Routes); 6: BundleTable.Bundles.RegisterTemplateBundles(); 7: //Call Autofac DI configurations 8: Bootstrapper.Run(); 9: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Autofac.Mvc4 The Autofac framework’s integration with ASP.NET MVC has updated for ASP.NET MVC 4. The NuGet package Autofac.Mvc4 provides the dependency injection support for ASP.NET MVC 4. There is not any syntax change between Autofac.Mvc3 and Autofac.Mvc4 Source Code I have updated my EFMVC app with Autofac.WebApi for applying dependency injection for it’s ASP.NET Web API services. EFMVC app also updated to Autofac.Mvc4 for it’s ASP.NET MVC 4 web app. The above code sample is taken from the EFMVC app. You can download the source code of EFMVC app from http://efmvc.codeplex.com/

  Read the article

• Creating an AJAX Accordion Menu

  - by jaullo

  Introduction Ajax is a powerful addition to asp.net that provides new functionality in a simple and agile  way This post is dedicated to creating a menu with ajax accordion type. About the Control The basic idea of this control, is to provide a serie of panels and show and hide information inside these panels. The use is very simple, we have to set each panel inside accordion control and give to each panel a Header and of course, we have to set the content of each panel.  To use accordion control, u need the ajax control toolkit. know the basic propertyes of accordion control:  Before start developing an accordion control, we have to know the basic properties for this control Other accordion propertyes  FramesPerSecond - Number of frames per second used in the transition animations RequireOpenedPane - Prevent closing the currently opened pane when its header is clicked (which ensures one pane is always open). The default value is true. SuppressHeaderPostbacks - Prevent the client-side click handlers of elements inside a header from firing (this is especially useful when you want to include hyperlinks in your headers for accessibility) DataSource - The data source to use. DataBind() must be called. DataSourceID - The ID of the data source to use. DataMember - The member to bind to when using a DataSourceID  AJAX Accordion Control Extender DataSource  The Accordion Control extender of AJAX Control toolkit can also be used as DataBound control. You can bind the data retrieved from the database to the Accordion control. Accordion Control consists of properties such as DataSource and DataSourceID (we can se it above) that can be used to bind the data. HeaderTemplate can used to display the header or title for the pane generated by the Accordion control, a click on which will open or close the ContentTemplate generated by binding the data with Accordion extender. When DataSource is passed to the Accordion control, also use the DataBind method to bind the data. The Accordion control bound with data auto generates the expand/collapse panes along with their headers.  This code represents the basic steps to bind the Accordion to a Datasource Collapse Public Sub getCategories() Dim sqlConn As New SqlConnection(conString) sqlConn.Open() Dim sqlSelect As New SqlCommand("SELECT * FROM Categories", sqlConn) sqlSelect.CommandType = System.Data.CommandType.Text Dim sqlAdapter As New SqlDataAdapter(sqlSelect) Dim myDataset As New DataSet() sqlAdapter.Fill(myDataset) sqlConn.Close() Accordion1.DataSource = myDataset.Tables(0).DefaultView Accordion1.DataBind()End Sub Protected Sub Accordion1_ItemDataBound(sender As Object, _ e As AjaxControlToolkit.AccordionItemEventArgs) If e.ItemType = AjaxControlToolkit.AccordionItemType.Content Then Dim sqlConn As New SqlConnection(conString) sqlConn.Open() Dim sqlSelect As New SqlCommand("SELECT productName " & _ "FROM Products where categoryID = '" + _ DirectCast(e.AccordionItem.FindControl("txt_categoryID"),_ HiddenField).Value + "'", sqlConn) sqlSelect.CommandType = System.Data.CommandType.Text Dim sqlAdapter As New SqlDataAdapter(sqlSelect) Dim myDataset As New DataSet() sqlAdapter.Fill(myDataset) sqlConn.Close() Dim grd As New GridView() grd = DirectCast(e.AccordionItem.FindControl("GridView1"), GridView) grd.DataSource = myDataset grd.DataBind() End If End Sub In the above code, we made two things, first, we made a sql select to database to retrieve all data from categories table, this data will be used to set the header and columns of the accordion.  Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <ajaxToolkit:Accordion ID="Accordion1" runat="server" TransitionDuration="100" FramesPerSecond="200" FadeTransitions="true" RequireOpenedPane="false" OnItemDataBound="Accordion1_ItemDataBound" ContentCssClass="acc-content" HeaderCssClass="acc-header" HeaderSelectedCssClass="acc-selected"> <HeaderTemplate> <%#DataBinder.Eval(Container.DataItem,"categoryName") %> </HeaderTemplate> <ContentTemplate> <asp:HiddenField ID="txt_categoryID" runat="server" Value='<%#DataBinder.Eval(Container.DataItem,"categoryID") %>' /> <asp:GridView ID="GridView1" runat="server" RowStyle-BackColor="#ededed" RowStyle-HorizontalAlign="Left" AutoGenerateColumns="false" GridLines="None" CellPadding="2" CellSpacing="2" Width="300px"> <Columns> <asp:TemplateField HeaderStyle-HorizontalAlign="Left" HeaderText="Product Name" HeaderStyle-BackColor="#d1d1d1" HeaderStyle-ForeColor="#777777"> <ItemTemplate> <%#DataBinder.Eval(Container.DataItem,"productName") %> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </ContentTemplate> </ajaxToolkit:Accordion>  Here, we use <%#DataBinder.Eval(Container.DataItem,"categoryName") %> to bind accordion header with categoryName, so we made on header for each element found on database.    Creating a basic accordion control As we know, to use any of the ajax components, there must be a registered ScriptManager on our site, which will be responsible for managing our controls. So the first thing we will do is create our script manager.     Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> Then we define our accordion  element and establish some basic properties:    Collapse <cc1:Accordion ID="AccordionCtrl" runat="server" SelectedIndex="0" HeaderCssClass="accordionHeader" ContentCssClass="accordionContent" AutoSize="None" FadeTransitions="true" TransitionDuration="250" FramesPerSecond="40" For our work we must declare PANES accordion inside it, these breads will be responsible for contain information, links or information that we want to show.  Collapse <Panes> <cc1:AccordionPane ID="AccordionPane0" runat="server"> <Header>Matenimiento</Header> <Content> <li><a href="mypagina.aspx">My página de prueba</a></li> </Content> </cc1:AccordionPane> To end this work, we have to close all panels and our accordion Collapse </Panes> </cc1:Accordion> Finally complete our example should look like:  Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> <cc1:Accordion ID="AccordionCtrl" runat="server" SelectedIndex="0" HeaderCssClass="accordionHeader" ContentCssClass="accordionContent" AutoSize="None" FadeTransitions="true" TransitionDuration="250" FramesPerSecond="40"> <Panes> <cc1:AccordionPane ID="AccordionPane0" runat="server"> <Header>Matenimiento</Header> <Content> <li><a href="mypagina.aspx">My página de prueba</a></li> </Content> </cc1:AccordionPane> </Panes> </cc1:Accordion>

  Read the article

• Validation in Silverlight

  - by Timmy Kokke

  Getting started with the basics Validation in Silverlight can get very complex pretty easy. The DataGrid control is the only control that does data validation automatically, but often you want to validate your own entry form. Values a user may enter in this form can be restricted by the customer and have to fit an exact fit to a list of requirements or you just want to prevent problems when saving the data to the database. Showing a message to the user when a value is entered is pretty straight forward as I’ll show you in the following example.     This (default) Silverlight textbox is data-bound to a simple data class. It has to be bound in “Two-way” mode to be sure the source value is updated when the target value changes. The INotifyPropertyChanged interface must be implemented by the data class to get the notification system to work. When the property changes a simple check is performed and when it doesn’t match some criteria an ValidationException is thrown. The ValidatesOnExceptions binding attribute is set to True to tell the textbox it should handle the thrown ValidationException. Let’s have a look at some code now. The xaml should contain something like below. The most important part is inside the binding. In this case the Text property is bound to the “Name” property in TwoWay mode. It is also told to validate on exceptions. This property is false by default.   <StackPanel Orientation="Horizontal"> <TextBox Width="150" x:Name="Name" Text="{Binding Path=Name, Mode=TwoWay, ValidatesOnExceptions=True}"/> <TextBlock Text="Name"/> </StackPanel>   The data class in this first example is a very simplified person class with only one property: string Name. The INotifyPropertyChanged interface is implemented and the PropertyChanged event is fired when the Name property changes. When the property changes a check is performed to see if the new string is null or empty. If this is the case a ValidationException is thrown explaining that the entered value is invalid.   public class PersonData:INotifyPropertyChanged { private string _name; public string Name { get { return _name; } set { if (_name != value) { if(string.IsNullOrEmpty(value)) throw new ValidationException("Name is required"); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } public event PropertyChangedEventHandler PropertyChanged=delegate { }; } The last thing that has to be done is letting binding an instance of the PersonData class to the DataContext of the control. This is done in the code behind file. public partial class Demo1 : UserControl { public Demo1() { InitializeComponent(); this.DataContext = new PersonData() {Name = "Johnny Walker"}; } }   Error Summary In many cases you would have more than one entry control. A summary of errors would be nice in such case. With a few changes to the xaml an error summary, like below, can be added.           First, add a namespace to the xaml so the control can be used. Add the following line to the header of the .xaml file. xmlns:Controls="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input"   Next, add the control to the layout. To get the result as in the image showed earlier, add the control right above the StackPanel from the first example. It’s got a small margin to separate it from the textbox a little.   <Controls:ValidationSummary Margin="8"/>   The ValidationSummary control has to be notified that an ValidationException occurred. This can be done with a small change to the xaml too. Add the NotifyOnValidationError to the binding expression. By default this value is set to false, so nothing would be notified. Set the property to true to get it to work.   <TextBox Width="150" x:Name="Name" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True}"/>   Data annotation Validating data in the setter is one option, but not my personal favorite. It’s the easiest way if you have a single required value you want to check, but often you want to validate more. Besides, I don’t consider it best practice to write logic in setters. The way used by frameworks like WCF Ria Services is the use of attributes on the properties. Instead of throwing exceptions you have to call the static method ValidateProperty on the Validator class. This call stays always the same for a particular property, not even when you change the attributes on the property. To mark a property “Required” you can use the RequiredAttribute. This is what the Name property is going to look like:   [Required] public string Name { get { return _name; } set { if (_name != value) { Validator.ValidateProperty(value, new ValidationContext(this, null, null){ MemberName = "Name" }); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } }   The ValidateProperty method takes the new value for the property and an instance of ValidationContext. The properties passed to the constructor of the ValidationContextclass are very straight forward. This part is the same every time. The only thing that changes is the MemberName property of the ValidationContext. Property has to hold the name of the property you want to validate. It’s the same value you provide the PropertyChangedEventArgs with. The System.ComponentModel.DataAnnotation contains eight different validation attributes including a base class to create your own. They are: RequiredAttribute Specifies that a value must be provided. RangeAttribute The provide value must fall in the specified range. RegularExpressionAttribute Validates is the value matches the regular expression. StringLengthAttribute Checks if the number of characters in a string falls between a minimum and maximum amount. CustomValidationAttribute Use a custom method to validate the value. DataTypeAttribute Specify a data type using an enum or a custom data type. EnumDataTypeAttribute Makes sure the value is found in a enum. ValidationAttribute A base class for custom validation attributes All of these will ensure that an validation exception is thrown, except the DataTypeAttribute. This attribute is used to provide some additional information about the property. You can use this information in your own code.   [Required] [Range(0,125,ErrorMessage = "Value is not a valid age")] public int Age {   It’s no problem to stack different validation attributes together. For example, when an Age is required and must fall in the range from 0 to 125:   [Required, StringLength(255,MinimumLength = 3)] public string Name {   Or in one row like this, for a required Name with at least 3 characters and a maximum of 255:   Delayed validation Having properties marked as required can be very useful. The only downside to the technique described earlier is that you have to change the value in order to get it validated. What if you start out with empty an empty entry form? All fields are empty and thus won’t be validated. With this small trick you can validate at the moment the user click the submit button.   <TextBox Width="150" x:Name="NameField" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True, UpdateSourceTrigger=Explicit}"/>   By default, when a TwoWay bound control looses focus the value is updated. When you added validation like I’ve shown you earlier, the value is validated. To overcome this, you have to tell the binding update explicitly by setting the UpdateSourceTrigger binding property to Explicit:   private void SubmitButtonClick(object sender, RoutedEventArgs e) { NameField.GetBindingExpression(TextBox.TextProperty).UpdateSource(); }   This way, the binding is in two direction but the source is only updated, thus validated, when you tell it to. In the code behind you have to call the UpdateSource method on the binding expression, which you can get from the TextBox.   Conclusion Data validation is something you’ll probably want on almost every entry form. I always thought it was hard to do, but it wasn’t. If you can throw an exception you can do validation. If you want to know anything more in depth about something I talked about in this article let me know. I might write an entire post to that.

  Read the article

• Tools to Help Post Content On Your WordPress Blog

  - by Matthew Guay

  Now that you’ve got a nice blog, you want to do more with it and start posting content.  Here we look at some tools that will allow you to post directly to your WordPress blog. Writing a new blog post is easy with WordPress as we saw in our previous post about Starting your own WordPress blog.  The web editor gives you a lot of features and even lets you edit your post’s source code if you enjoy hacking HTML.  There are other tools that will allow you to post content, here we look at how you can post with dedicated apps, browser plugins, and even by email. Windows Live Writer Windows Live Writer (part of the Windows Live Essentials Suite) is a great app for posting content to your blog.  This free program for Microsoft lets you post content to a variety of blogging services, including Blogger, Typepad, LiveJournal, and of course WordPress.  You can write blog posts directly from its Word-like editor, complete with pictures and advanced formatting.  Even if you’re offline, you can still write posts and save them for when you’re online again. For more information about installing Live writer, check out our article on how to Install Windows Live Essentials In Windows 7. Once Live Writer is installed, open it to add your blog.  If you already had Live Writer installed and configured for a blog, you can add your new blog, too.  Just click your blog’s name in the top right corner, and select “Add blog account”. Select “Other blog service” to add your WordPress blog to Writer, and click Next.   Enter your blog’s web address, and your username and password.  Check Remember my password so you don’t have to enter it every time you write something. Writer will analyze your blog and setup your account. During the setup process it may ask to post a temporary post.  This will let you preview blog posts using your blog’s real theme, which is helpful, so click Yes. Finally, add your Blog’s name, and click Finish. You can now use the rich editor to write and add content to a new blog post.   Select the Preview tab to see how your post will look on your blog… Or, if you’re a HTML geek, select the Source tab to edit the code of your blog post. From the bottom of the window, you can choose categories, insert tags, and even schedule the post to publish on a different day.  Live Writer is fully integrated with WordPress; you’re not missing anything by using the desktop editor. If you want to edit a post you’ve already published, click the Open button and select the post.  You can chose and edit any post, including ones you published via the web interface or other editors. Add Multimedia Content to your Posts with Live Writer Back in the Edit tab, you can add pictures, videos and more from the sidebar.  Select what you want to insert. Pictures If you insert a picture, you can add many nice borders and designs to it. Or, you can even add artistic effects from the Effects tab in the sidebar. Photo Gallery If you want to post several pictures, say some of your vacation shots, then inserting a picture gallery may be the best option.  Select Insert Photo Gallery in the sidebar, and then choose the pictures you want in the gallery. Once the gallery is inserted, you can choose from several styles to showcase your pictures. When you post the blog, you will be asked to sign in with your Windows Live ID as the gallery pictures will be stored in the free Skydrive storage service. Your blog readers can see the preview of your pictures directly on your blog, and then can view each individual picture, download them, or see a slideshow online via the link. Video If you want to add a video to your blog post, select Video from the sidebar as above.  You can select a video that’s already online, or you can choose a new video from file and upload it via YouTube directly from Windows Live Writer.   Note that you will have to sign in with your YouTube account to upload videos to YouTube, so if you’re not logged in you’ll be prompted to do so when you click Insert. Geek Tip:  If you ever want to copy your Live Writer settings to another computer, check out our article on how to Backup Your Windows Live Writer Settings. Microsoft Office Word Word 2007 and 2010 also let you post content directly to your blog.  This is especially nice if you’ve already typed up a document and think it would be good on your Blog as well.  Check out our in-depth tutorial on posting blog posts via Word 2007 using Word 2007 as a blogging tool. This works in Word 2010 too, except the Office Orb has been replaced by the new Backstage view.  So, in Word 2010, to start a new blog post, click File \ New then select Blog post.  Proceed as you would in Word 2007 to add your blog settings and post the content you want. Or, if you’ve already written a document and want to post it, select File \ Share (or Save and Send in the final version of Word 2010), and then click Publish as Blog Post.  If you haven’t setup your blog account yet, set it up as shown in the Word 2007 article. Post Via Email Most of us use email daily, and already have our favorite email app or service.  Whether on your desktop or mobile phone, it’s easy to create rich emails and add content.  WordPress lets you generate a unique email address that you can use to easily post content and email to your blog.  Just compose your email with the subject as the title of your post, and send it to this unique address.  Your new post will be up in minutes. To active this feature, click the My Account button in the top menu bar in your WordPress.com account, and select My Blogs. Click the Enable button under Post by Email beside your blog’s name.   Now you’ll have a private email you can use to post to your blog.  Anything you send to this email will be posted as a new post.  If you think your email may be compromised, click Regenerate to get a new publishing email address. Any email program or webapp now is a blog post editor.  Feel free to use rich formatting or insert pictures; it all comes through great.  This is also a great way to post to your blog from your mobile device.  Whether you’re using webmail or a dedicated email client on your phone, you can now blog from anywhere.   Mobile Applications WordPress also offer dedicated applications for blogging directly from your mobile device.  You can write new posts, edit existing ones, and manage comments all from your Smartphone.  Currently they offer apps for iPhone, Android, and Blackberry.  Check them out at the link below. Conclusion Whether you want to write from your browser or email a post to your blog, WordPress is flexible enough to work right along with your preferences.  However you post, you can be sure that it will look professional and be easily accessible with your WordPress blog. Download Windows Live Writer Download WordPress apps for your mobile device Similar Articles Productive Geek Tips Quick Tip: Set a Future Date for a Post in WordPressAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFuture Date a Post in Windows Live WriterHow To Start Your Own Professional Blog with WordPressUsing Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

  Read the article

• SSIS Lookup component tuning tips

  - by jamiet

  Yesterday evening I attended a London meeting of the UK SQL Server User Group at Microsoft’s offices in London Victoria. As usual it was both a fun and informative evening and in particular there seemed to be a few questions arising about tuning the SSIS Lookup component; I rattled off some comments and figured it would be prudent to drop some of them into a dedicated blog post, hence the one you are reading right now. Scene setting A popular pattern in SSIS is to use a Lookup component to determine whether a record in the pipeline already exists in the intended destination table or not and I cover this pattern in my 2006 blog post Checking if a row exists and if it does, has it changed? (note to self: must rewrite that blog post for SSIS2008). Fundamentally the SSIS lookup component (when using FullCache option) sucks some data out of a database and holds it in memory so that it can be compared to data in the pipeline. One of the big benefits of using SSIS dataflows is that they process data one buffer at a time; that means that not all of the data from your source exists in the dataflow at the same time and is why a SSIS dataflow can process data volumes that far exceed the available memory. However, that only applies to data in the pipeline; for reasons that are hopefully obvious ALL of the data in the lookup set must exist in the memory cache for the duration of the dataflow’s execution which means that any memory used by the lookup cache will not be available to be used as a pipeline buffer. Moreover, there’s an obvious correlation between the amount of data in the lookup cache and the time it takes to charge that cache; the more data you have then the longer it will take to charge and the longer you have to wait until the dataflow actually starts to do anything. For these reasons your goal is simple: ensure that the lookup cache contains as little data as possible. General tips Here is a simple tick list you can follow in order to tune your lookups: Use a SQL statement to charge your cache, don’t just pick a table from the dropdown list made available to you. (Read why in SELECT *... or select from a dropdown in an OLE DB Source component?) Only pick the columns that you need, ignore everything else Make the database columns that your cache is populated from as narrow as possible. If a column is defined as VARCHAR(20) then SSIS will allocate 20 bytes for every value in that column – that is a big waste if the actual values are significantly less than 20 characters in length. Do you need DT_WSTR typed columns or will DT_STR suffice? DT_WSTR uses twice the amount of space to hold values that can be stored using a DT_STR so if you can use DT_STR, consider doing so. Same principle goes for the numerical datatypes DT_I2/DT_I4/DT_I8. Only populate the cache with data that you KNOW you will need. In other words, think about your WHERE clause! Thinking outside the box It is tempting to build a large monolithic dataflow that does many things, one of which is a Lookup. Often though you can make better use of your available resources by, well, mixing things up a little and here are a few ideas to get your creative juices flowing: There is no rule that says everything has to happen in a single dataflow. If you have some particularly resource intensive lookups then consider putting that lookup into a dataflow all of its own and using raw files to pass the pipeline data in and out of that dataflow. Know your data. If you think, for example, that the majority of your incoming rows will match with only a small subset of your lookup data then consider chaining multiple lookup components together; the first would use a FullCache containing that data subset and the remaining data that doesn’t find a match could be passed to a second lookup that perhaps uses a NoCache lookup thus negating the need to pull all of that least-used lookup data into memory. Do you need to process all of your incoming data all at once? If you can process different partitions of your data separately then you can partition your lookup cache as well. For example, if you are using a lookup to convert a location into a [LocationId] then why not process your data one region at a time? This will mean your lookup cache only has to contain data for the location that you are currently processing and with the ability of the Lookup in SSIS2008 and beyond to charge the cache using a dynamically built SQL statement you’ll be able to achieve it using the same dataflow and simply loop over it using a ForEach loop. Taking the previous data partitioning idea further … a dataflow can contain more than one data path so why not split your data using a conditional split component and, again, charge your lookup caches with only the data that they need for that partition. Lookups have two uses: to (1) find a matching row from the lookup set and (2) put attributes from that matching row into the pipeline. Ask yourself, do you need to do these two things at the same time? After all once you have the key column(s) from your lookup set then you can use that key to get the rest of attributes further downstream, perhaps even in another dataflow. Are you using the same lookup data set multiple times? If so, consider the file caching option in SSIS 2008 and beyond. Above all, experiment and be creative with different combinations. You may be surprised at what works. Final  thoughts If you want to know more about how the Lookup component differs in SSIS2008 from SSIS2005 then I have a dedicated blog post about that at Lookup component gets a makeover. I am on a mini-crusade at the moment to get a BULK MERGE feature into the database engine, the thinking being that if the database engine can quickly merge massive amounts of data in a similar manner to how it can insert massive amounts using BULK INSERT then that’s a lot of work that wouldn’t have to be done in the SSIS pipeline. If you think that is a good idea then go and vote for BULK MERGE on Connect. If you have any other tips to share then please stick them in the comments. Hope this helps! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• dasBlog

  - by Daniel Moth

  Some people like blogging on a site that is completely managed by someone else (e.g. http://wordpress.com/) and others, like me, prefer hosting their own blog at their own domain. In the latter case you need to decide what blog engine to install on your web space to power your blog. There are many free blog engines to choose from (e.g. the one from http://wordpress.org/). If, like me, you want to use a blog engine that is based on the .NET platform you have many choices including BlogEngine.NET, Subtext and the one I picked: dasBlog. In this post I'll describe the steps I took to get going with the open source dasBlog (home page, source page). A. Installing First I installed dasBlog on my local Windows 7 machine where I have IIS7 installed. To install dasBlog, I started by clicking the "Install" button on its web gallery page. After that I went through configuration, theming and adding content as described below. Once I was happy that everything was working correctly on the local machine, I set this up on a hosting service. I went for a Windows IIS7 shared hosting 3 month Economy plan from GoDaddy. The dasBlog site lists a bunch of other hosts. You can read the installation instructions for dasBlog, and with GoDaddy I just had to click one button since it is available as part of their quick-install apps. With GoDaddy I had a previewdns option that allowed me to play around and preview my site before going live. B. Configuring After it was installed (on local machine and/or hosting provider), I followed the obvious steps to create an admin user and logged in. This displays an admin navigation bar with the following options: 1. Navigator Links: I decided I was not going to use this feature. I manage links on the side of my blog manually elsewhere as part of the theme. So, I deleted every entry on this page and ignored it thereafter. 2. Blogroll: Ditto - same comment as for Navigator Links. 3. Content Filters: I did not delete (or add) these, but I did ensure both checkboxes are not checked. I.e. I am not using this feature now, but I may return to it in the future. 4. Activity: This is a read-only view of various statistics. So nothing to configure here, but useful to come back to for complementary statistics to whatever other statistical package you use (e.g. free stats as part of the hosting and I also use feedburner for syndication stats). 5. Cross-posting: I did not need that, so I turned it off via the Configuration Settings discussed next. 6. Configuration Settings: This is where the bulk of the configuration for the blog takes place and they are stored in a single XML file: Site.Config file. There are truly self-explanatory options to pick for Basic Settings, Services Settings and Services to Ping, Syndication Settings (this is where you link to your feedburner name if you have one) and Mail to Weblog Settings (I keep this turned off). There are also "Xml Storage System Settings" (I keep this turned off), "OpenId Settings" (I allow OpenID commenters), "Spammer Settings" (Enable captcha, never show email addresses) and "Comment settings" (Enable comments, don't allow on older posts, don't allow html). There are also Appearance Settings (I checked the "Use Post Title for Permalink", replaced spaces with hyphen and unchecked the "Use Unique Title"). Finally, there are also Notification Settings, but they are a bit of hit and miss in my case, in that I don’t always get the emails (still investigating this). C. Adding Content You can add content via the "Add Entry" link on the admin navigation bar or by configuring the "Mail to Weblog" settings and sending email or, do what I've started doing, use Live Writer (also the team has a blog). Another way to add content is programmatically if, for example, you are migrating content from another blog (and I'll cover that in separate post sharing the code). What you should know is that all blog content (posts and comments) live in XML files in a folder called "content" under your dasBlog installation. D. Theming There is a very good guide about themes for dasBlog, there is also a similar guide with screenshots (scroll down to "So how do I create a theme") and the dasBlog macro reference. When you install dasBlog, there are many themes available; each theme is in its own folder (representing the folder name) under the themes folder. You may have noticed that you can switch between these via the "Appearance Settings" described above (look for the combobox after the Default Theme label). I created my own theme by copy-pasting an existing theme folder, renaming it and then switching to it as the default. I then opened the folder in Visual Studio and hacked around the HTML in the 3 files (itemTemplate, homeTemplate and dayTemplate). These files have a blogtemplate file extension, which I temporarily renamed to HTML as I was editing them. There is no more advice I can offer here as this is a matter of taste and the aforementioned links is all I used. Personally, I had salvaged the CSS (and structure) from my previous blog and wanted to make this one match it as closely as possible - I think I have succeeded. E. If you run into any issue with dasBlog... ...use your favorite search engine to find answers. Many bloggers have been using this engine for a while and have documented issues and workarounds over time. One such example is ScottHa's dasBlog category; another example is therightstuff where I "borrowed" the idea/macro for the outlook-style on-page navigation. If you don't find what you want through searching, try posting a question to the forums. Comments about this post welcome at the original blog.

  Read the article

• FAQ: GridView Calculation with JavaScript - Formatting and Validation

  - by Vincent Maverick Durano

  In my previous post here we've talked about how to calculate the sub-totals and grand total in GridView using JavaScript. In this post I'm going take more step further and will demonstrate how are we going to format the totals into a currency and how to validate the input that would only allow you to enter a whole number in the quantity TextBox. Here are the code blocks below: ASPX Source:   <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> <script type="text/javascript"> function CalculateTotals() { var gv = document.getElementById("<%= GridView1.ClientID %>"); var tb = gv.getElementsByTagName("input"); var lb = gv.getElementsByTagName("span"); var sub = 0; var total = 0; var indexQ = 1; var indexP = 0; var price = 0; for (var i = 0; i < tb.length; i++) { if (tb[i].type == "text") { ValidateNumber(tb[i]); price = lb[indexP].innerHTML.replace("$", "").replace(",", ""); sub = parseFloat(price) * parseFloat(tb[i].value); if (isNaN(sub)) { lb[i + indexQ].innerHTML = "0.00"; sub = 0; } else { lb[i + indexQ].innerHTML = FormatToMoney(sub, "$", ",", "."); ; } indexQ++; indexP = indexP + 2; total += parseFloat(sub); } } lb[lb.length - 1].innerHTML = FormatToMoney(total, "$", ",", "."); } function ValidateNumber(o) { if (o.value.length > 0) { o.value = o.value.replace(/[^\d]+/g, ''); //Allow only whole numbers } } function isThousands(position) { if (Math.floor(position / 3) * 3 == position) return true; return false; }; function FormatToMoney(theNumber, theCurrency, theThousands, theDecimal) { var theDecimalDigits = Math.round((theNumber * 100) - (Math.floor(theNumber) * 100)); theDecimalDigits = "" + (theDecimalDigits + "0").substring(0, 2); theNumber = "" + Math.floor(theNumber); var theOutput = theCurrency; for (x = 0; x < theNumber.length; x++) { theOutput += theNumber.substring(x, x + 1); if (isThousands(theNumber.length - x - 1) && (theNumber.length - x - 1 != 0)) { theOutput += theThousands; }; }; theOutput += theDecimal + theDecimalDigits; return theOutput; } </script> </head> <body> <form id="form1" runat="server"> <asp:gridview ID="GridView1" runat="server" ShowFooter="true" AutoGenerateColumns="false"> <Columns> <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> <asp:BoundField DataField="Description" HeaderText="Item Description" /> <asp:TemplateField HeaderText="Item Price"> <ItemTemplate> <asp:Label ID="LBLPrice" runat="server" Text='<%# Eval("Price","{0:C}") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Quantity"> <ItemTemplate> <asp:TextBox ID="TXTQty" runat="server" onkeyup="CalculateTotals();"></asp:TextBox> </ItemTemplate> <FooterTemplate> <b>Total Amount:</b> </FooterTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Sub-Total"> <ItemTemplate> <asp:Label ID="LBLSubTotal" runat="server" ForeColor="Green" Text="0.00"></asp:Label> </ItemTemplate> <FooterTemplate> <asp:Label ID="LBLTotal" runat="server" ForeColor="Green" Font-Bold="true" Text="0.00"></asp:Label> </FooterTemplate> </asp:TemplateField> </Columns> </asp:gridview> </form> </body> </html> Code Behind Source:   public partial class GridCalculation : System.Web.UI.Page { private void BindDummyDataToGrid() { DataTable dt = new DataTable(); DataRow dr = null; dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); dt.Columns.Add(new DataColumn("Description", typeof(string))); dt.Columns.Add(new DataColumn("Price", typeof(decimal))); dr = dt.NewRow(); dr["RowNumber"] = 1; dr["Description"] = "Nike"; dr["Price"] = "1000"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 2; dr["Description"] = "Converse"; dr["Price"] = "800"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 3; dr["Description"] = "Adidas"; dr["Price"] = "500"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 4; dr["Description"] = "Reebok"; dr["Price"] = "750"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 5; dr["Description"] = "Vans"; dr["Price"] = "1100"; dt.Rows.Add(dr); dr = dt.NewRow(); dr["RowNumber"] = 6; dr["Description"] = "Fila"; dr["Price"] = "200"; dt.Rows.Add(dr); //Bind the Gridview GridView1.DataSource = dt; GridView1.DataBind(); } protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { BindDummyDataToGrid(); } } } Running the code above will display something like this: On initial load After entering the quantity in the TextBox That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,C#,ADO.NET,JavaScript,GridView

  Read the article

< Previous Page | 784 785 786 787 788 789 790 791 792 793 794 795  | Next Page >