Search Results

Search found 22000 results on 880 pages for 'worker process'.

Page 793/880 | < Previous Page | 789 790 791 792 793 794 795 796 797 798 799 800  | Next Page >

  • SQL – Business Intelligence: Derive Data or Information?

    - by Pinal Dave
    We all know the value of information in our lives. Whether it’s a personal decision or a business initiated one, people need it. But the question is: who is to make the distinction between data and information? We all come across a whole lot of data daily, that may be significant or not. We filter what’s required and forget about the rest. Information is filtered and distilled data. Filtering and distillation can also alter its actual meaning and natural state. Therefore, in this blog we discover some ways to ensure that we’re using business intelligence derived from the right information for making critical management decisions. Four key questions managers must ask themselves before making a decision: 1. Am I working with data or information? 2. What is it’s context? 3. How recent is it? 4. How was it derived or what is the source? The first question is probably the most important. You must know what you’re dealing with here. If you see use of adjectives and conclusions drawn, it’s information. Not raw data. You very next concern must be whether this is guised to present a particular viewpoint or perspective. It makes a lot of difference if you take a decision based on someone’s propaganda to distort real facts. Therefore, the context and the intentions of the distillation process must be clear to you. The next consideration is whether data is recent enough to hold any value. Since it has a very short shelf life, you must ensure that its context and value is not lost out of time. The last and the most important consideration is how was it derived in the first place. The observer effect is what calls the shots here. The source can change the context to a great extent if the collection methodology  and purpose is not clear. Gathering intelligence for decision making requires users to be keen observers and not take the information provided on its face value alone. These probing questions will allow you to make sure that you’re working with clean and accurate data devoid of any influence or manipulations. Only then can you be sure of deriving true business intelligence for your organization. BI technology is also a great way to ensure accuracy of reports. SQL BI Platform  provides advanced tools and techniques for all your BI needs and concerns. Koenig Solutions offers this course along with a host of other Business Intelligence and IT courses on all latest technologies available in the market today. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • IPgallery banks on Solaris SPARC

    - by Frederic Pariente
    IPgallery is a global supplier of converged legacy and Next Generation Networks (NGN) products and solutions, including: core network components and cloud-based Value Added Services (VAS) for voice, video and data sessions. IPgallery enables network operators and service providers to offer advanced converged voice, chat, video/content services and rich unified social communications in a combined legacy (fixed/mobile), Over-the-Top (OTT) and Social Community (SC) environments for home and business customers. Technically speaking, this offer is a scalable and robust telco solution enabling operators to offer new services while controlling operating expenses (OPEX). In its solutions, IPgallery leverages the following Oracle components: Oracle Solaris, Netra T4 and SPARC T4 in order to provide a competitive and scalable solution without the price tag often associated with high-end systems. Oracle Solaris Binary Application Guarantee A unique feature of Oracle Solaris is the guaranteed binary compatibility between releases of the Solaris OS. That means, if a binary application runs on Solaris 2.6 or later, it will run on the latest release of Oracle Solaris.  IPgallery developed their application on Solaris 9 and Solaris 10 then runs it on Solaris 11, without any code modification or rebuild. The Solaris Binary Application Guarantee helps IPgallery protect their long-term investment in the development, training and maintenance of their applications. Oracle Solaris Image Packaging System (IPS) IPS is a new repository-based package management system that comes with Oracle Solaris 11. It provides a framework for complete software life-cycle management such as installation, upgrade and removal of software packages. IPgallery leverages this new packaging system in order to speed up and simplify software installation for the R&D and production environments. Notably, they use IPS to deliver Solaris Studio 12.3 packages as part of the rapid installation process of R&D environments, and during the production software deployment phase, they ensure software package integrity using the built-in verification feature. Solaris IPS thus improves IPgallery's time-to-market with a faster, more reliable software installation and deployment in production environments. Extreme Network Performance IPgallery saw a huge improvement in application performance both in CPU and I/O, when running on SPARC T4 architecture in compared to UltraSPARC T2 servers.  The same application (with the same activation environment) running on T2 consumes 40%-50% CPU, while it consumes only 10% of the CPU on T4. The testing environment comprised of: Softswitch (Call management), TappS (Telecom Application Server) and Billing Server running on same machine and initiating various services in capacity of 1000 CAPS (Call Attempts Per Second). In addition, tests showed a huge improvement in the performance of the TCP/IP stack, which reduces network layer processing and in the end Call Attempts latency. Finally, there is a huge improvement within the file system and disk I/O operations; they ran all tests with maximum logging capability and it didn't influence any benchmark values. "Due to the huge improvements in performance and capacity using the T4-1 architecture, IPgallery has engineered the solution with less hardware.  This means instead of deploying the solution on six T2-based machines, we will deploy on 2 redundant machines while utilizing Oracle Solaris Zones and Oracle VM for higher availability and virtualization" Shimon Lichter, VP R&D, IPgallery In conclusion, using the unique combination of Oracle Solaris and SPARC technologies, IPgallery is able to offer solutions with much lower TCO, while providing a higher level of service capacity, scalability and resiliency. This low-OPEX solution enables the operator, the end-customer, to deliver a high quality service while maintaining high profitability.

    Read the article

  • Lost in Translation – Common Mistakes Interpreting Patterns – Mark Simpson, Griffiths-Waite @ SOA, Cloud & Service Technology Symposium 2012

    - by JuergenKress
    ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 For details please visit the registration page International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Speaker: Mark Simpson, Griffiths-Waite Mark has been specialising in Oracle technology for 13 years, the last 10 of these with Griffiths Waite. Mark leads our SOA technology practice (covering SOA, Business Process Management and Enterprise Architecture). He is a much sought after presenter on the Oracle and SOA conference circuits, and a respected authority on these technologies. Mark has advised a host of UK leading organisations on the deployment of BPM / SOA solutions. Working closely with Oracle US Product Development Mark has contributed to Oracle's SOA Methodology and Oracle's SOA Maturity Model. Lost in Translation – Common Mistakes Interpreting Patterns Learn how small misinterpretations of high-level design patterns can have large and costly project ramifications. Good SOA design benefits from the use of a reference architecture and standardised design patterns. However both of these concepts give an abstracted view of the intended solution, which needs to be interpreted to become realised. A reference implementation is important to demonstrate how key design guidelines can be implemented in the toolset of choice, but the main success factor is how these are used through the build and post live phases of the project. This session will introduce practical design patterns with supporting implementation examples that, if used correctly, will give long term benefit. We will highlight implementations where misinterpretations or misalignment from pattern aims have led to issues post implementation. The session will add depth to the pattern discussions you are already having enabling confidence in proceeding to the next level of realisation whilst considering how they may be implemented within your solution and chosen toolset. September 25, 2012 - 13:55 KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Mark Simpson,Griffiths Waite,SOA Patterns,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

    Read the article

  • Threading Overview

    - by ACShorten
    One of the major features of the batch framework is the ability to support multi-threading. The multi-threading support allows a site to increase throughput on an individual batch job by splitting the total workload across multiple individual threads. This means each thread has fine level control over a segment of the total data volume at any time. The idea behind the threading is based upon the notion that "many hands make light work". Each thread takes a segment of data in parallel and operates on that smaller set. The object identifier allocation algorithm built into the product randomly assigns keys to help ensure an even distribution of the numbers of records across the threads and to minimize resource and lock contention. The best way to visualize the concept of threading is to use a "pie" analogy. Imagine the total workset for a batch job is a "pie". If you split that pie into equal sized segments, each segment would represent an individual thread. The concept of threading has advantages and disadvantages: Smaller elapsed runtimes - Jobs that are multi-threaded finish earlier than jobs that are single threaded. With smaller amounts of work to do, jobs with threading will finish earlier. Note: The elapsed runtime of the threads is rarely proportional to the number of threads executed. Even though contention is minimized, some contention does exist for resources which can adversely affect runtime. Threads can be managed individually – Each thread can be started individually and can also be restarted individually in case of failure. If you need to rerun thread X then that is the only thread that needs to be resubmitted. Threading can be somewhat dynamic – The number of threads that are run on any instance can be varied as the thread number and thread limit are parameters passed to the job at runtime. They can also be configured using the configuration files outlined in this document and the relevant manuals.Note: Threading is not dynamic after the job has been submitted Failure risk due to data issues with threading is reduced – As mentioned earlier individual threads can be restarted in case of failure. This limits the risk to the total job if there is a data issue with a particular thread or a group of threads. Number of threads is not infinite – As with any resource there is a theoretical limit. While the thread limit can be up to 1000 threads, the number of threads you can physically execute will be limited by the CPU and IO resources available to the job at execution time. Theoretically with the objects identifiers evenly spread across the threads the elapsed runtime for the threads should all be the same. In other words, when executing in multiple threads theoretically all the threads should finish at the same time. Whilst this is possible, it is also possible that individual threads may take longer than other threads for the following reasons: Workloads within the threads are not always the same - Whilst each thread is operating on the roughly the same amounts of objects, the amount of processing for each object is not always the same. For example, an account may have a more complex rate which requires more processing or a meter has a complex amount of configuration to process. If a thread has a higher proportion of objects with complex processing it will take longer than a thread with simple processing. The amount of processing is dependent on the configuration of the individual data for the job. Data may be skewed – Even though the object identifier generation algorithm attempts to spread the object identifiers across threads there are some jobs that use additional factors to select records for processing. If any of those factors exhibit any data skew then certain threads may finish later. For example, if more accounts are allocated to a particular part of a schedule then threads in that schedule may finish later than other threads executed. Threading is important to the success of individual jobs. For more guidelines and techniques for optimizing threading refer to Multi-Threading Guidelines in the Batch Best Practices for Oracle Utilities Application Framework based products (Doc Id: 836362.1) whitepaper available from My Oracle Support

    Read the article

  • Can't connect to VPN on Ubuntu 12.04

    - by 12rad
    I'm having a lot of trouble connecting to VPN. This used to work on my machine, but i recently did an update and it's stopped working. I'm not sure what the problem is. My question is how do i debug this? I'm not able to narrow it down to a specific problem. This is what i get when i tail the syslogs. Would appreciate any help! Nov 6 23:42:52 meera NetworkManager[1137]: <info> Starting VPN service 'pptp'... Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 6132 Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN service 'pptp' appeared; activating connections Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN plugin state changed: starting (3) Nov 6 23:42:52 meera NetworkManager[1137]: <info> VPN connection 'NAME VPN' (Connect) reply received. Nov 6 23:42:52 meera pppd[6136]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Nov 6 23:42:52 meera pppd[6136]: pppd 2.4.5 started by root, uid 0 Nov 6 23:42:52 meera chat[6139]: timeout set to 15 seconds Nov 6 23:42:52 meera chat[6139]: abort on (NO CARRIER) Nov 6 23:42:52 meera chat[6139]: abort on (NO DIALTONE) Nov 6 23:42:52 meera chat[6139]: abort on (ERROR) Nov 6 23:42:52 meera chat[6139]: abort on (NO ANSWER) Nov 6 23:42:52 meera chat[6139]: abort on (BUSY) Nov 6 23:42:52 meera chat[6139]: abort on (Username/Password Incorrect) Nov 6 23:42:52 meera chat[6139]: send (AT^M) Nov 6 23:42:52 meera pptp[6138]: nm-pptp-service-6132 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Nov 6 23:42:52 meera chat[6139]: expect (OK) Nov 6 23:42:52 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Nov 6 23:42:53 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Nov 6 23:42:54 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 13077). Nov 6 23:42:54 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:231]: The ppp mode is synchronous, yet no pptp --sync option is specified! Nov 6 23:43:07 meera chat[6139]: alarm Nov 6 23:43:07 meera chat[6139]: Failed Nov 6 23:43:07 meera pppd[6136]: Script chat -v -f /etc/ppp/chat-ztisp finished (pid 6139), status = 0x3 Nov 6 23:43:07 meera pppd[6136]: Connect script failed Nov 6 23:43:07 meera pppd[6136]: Waiting for 1 child processes... Nov 6 23:43:07 meera pppd[6136]: script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132, pid 6138 Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:204]: short read (-1): Input/output error Nov 6 23:43:07 meera pptp[6138]: nm-pptp-service-6132 warn[decaps_hdlc:pptp_gre.c:216]: pppd may have shutdown, see pppd log Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[callmgr_main:pptp_callmgr.c:234]: Closing connection (unhandled) Nov 6 23:43:07 meera pppd[6136]: Script /usr/sbin/pptp 204.197.218.90 --nolaunchpppd --loglevel 0 --logstring nm-pptp-service-6132 finished (pid 6138), status = 0x0 Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Nov 6 23:43:07 meera pptp[6143]: nm-pptp-service-6132 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Nov 6 23:43:07 meera pppd[6136]: Exit. Nov 6 23:43:07 meera NetworkManager[1137]: <warn> VPN plugin failed: 1 Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state changed: stopped (6) Nov 6 23:43:07 meera NetworkManager[1137]: <info> VPN plugin state change reason: 0 Nov 6 23:43:07 meera NetworkManager[1137]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active.

    Read the article

  • Getting Started with NASM

    - by MarkPearl
    Today I got to play with NASM. This is an assembler and disassembler that can be used to write 16-bit, 32-bit & 64-bit programs. Let me say upfront that the last time I looked at assembly code at any depth was when I was studying Computer Science in Pietermaritzburg – ten years ago – and we never ever got to touch any real assembly code so a lot of what I am looking at today is very new to me. The first thing I did was download NASM compiler. This turned out to be a bit more complicated than I thought. Originally I went to http://www.nasm.us/ and downloaded the nasm-2.09.04.zip file which I thought had all I needed. No luck! It seemed to just have the uncompiled code, and from what I could tell I would need to recompile and build it – possibly in c++? Well, I wasn’t going to waste my time with that, so a bit more searching and I found the Win32 (http://www.nasm.us/pub/nasm/releasebuilds/2.09.04/win32/) folder Nasm.exe which I downloaded. Choosing an IDE So, I have NASM compiler but to compile anything you need to pass a string of special characters in the command prompt. That’s fine if I was going to just do one program once every couple of years, but since I am aiming to do quite a bit more exploration of NASM I began searching for an IDE. There were a few options, even apparently Visual Studio with a bit of tweeking could do the job, but from past experience I wanted to avoid the VS route as it can sometimes get confusing. I eventually settled on TextPad which I had used a few years ago for a similar project and it had been simple enough yet powerful enough to do the job. A bit of searching and I found a syntax file for NASM and everything seemed hunky dory. Configuring TextPad to run the NASM Compiler Next was to get TextPad to run the NASM compiler. TextPad has this external tools option that allows one to configure special commands. To simplify the process I first created a bat file in the NASM directory that allowed me to simply compile asm files. The bat file was called as.bat and had just one line of code… nasm -f bin %1.asm -o %1.com -l %1.lst Once I had created as.bat I just needed to go into TextPad and create a tool. I have made a quick video of that just showing you where the various settings are which is viewable below. The 64Bit Problem So I now have an ‘IDE’ linked to my NASM compiler so everything should be fine right? No! Whenever I tried to compile an asm program it compiles fine, but when I try and run it I get an error – “This version of the file is not compatible with the version Windows you’re running. Check your computer’s system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher." Well.. it turns out there are a few complications with having a 64 bit OS! So after searching google and coming to any real solution that I could find other than perhaps attempting to build the code for nasm, I eventually resorted to running a VM with Windows XP on it and putting NASM there… My first hello world program So I attempt my first hello world program as per an example I found… the code was quite simple and is shown below… bits16 org 0x100 jmp main message: db 'Hello World',0ah,0dh,'$' main: mov dx,message mov ah,09 int 21h int 20h Running the build tool from TextPad and everything compiles fine and I now have a console app with helllo world shown. Conclusion It’s very early days with NASM. I have been spoilt with Visual Studio and high order languages so I assume it will be a painful ride getting into the basics of assembly programming but I am hoping that at the end of it, I will at least have a bit more exposure to a language closer to the metal.

    Read the article

  • SQL SERVER – How to Roll Back SQL Server Database Changes

    - by Pinal Dave
    In a perfect scenario, no unexpected and unplanned changes occur. There are no unpleasant surprises, no inadvertent changes. However, even with all precautions and testing, there is sometimes a need to revert a structure or data change. One of the methods that can be used in this situation is to use an older database backup that has the records or database object structure you want to revert to. For this method, you have to have the adequate full database backup and a tool that will help you with comparison and synchronization is preferred. In this article, we will focus on another method: rolling back the changes. This can be done by using: An option in SQL Server Management Studio T-SQL, or ApexSQL Log The first two solutions have been described in this article The disadvantages of these methods are that you have to know when exactly the change you want to revert happened and that all transactions on the database executed in a specific time range are rolled back – the ones you want to undo and the ones you don’t. How to easily roll back SQL Server database changes using ApexSQL Log? The biggest challenge is to roll back just specific changes, not all changes that happened in a specific time range. While SQL Server Management Studio option and T-SQL read and roll forward all transactions in the transaction log files, I will show you a solution that finds and scripts only the specific changes that match your criteria. Therefore, you don’t need to worry about all other database changes that you don’t want to roll back. ApexSQL Log is a SQL Server disaster recovery tool that reads transaction logs and provides a wide range of filters that enable you to easily rollback only specific data changes. First, connect to the online database where you want to roll back the changes. Once you select the database, ApexSQL Log will show its recovery model. Note that changes can be rolled back even for a database in the Simple recovery model, when no database and transaction log backups are available. However, ApexSQL Log achieves best results when the database is in the Full recovery model and you have a chain of subsequent transaction log backups, back to the moment when the change occurred. In this example, we will use only the online transaction log. In the next step, use filters to read only the transactions that happened in a specific time range. To remove noise, it’s recommended to use as many filters as possible. Besides filtering by the time of the transaction, ApexSQL Log can filter by the operation type: Table name: As well as transaction state (committed, aborted, running, and unknown), name of the user who committed the change, specific field values, server process IDs, and transaction description. You can select only the tables affected by the changes you want to roll back. However, if you’re not certain which tables were affected, you can leave them all selected and once the results are shown in the main grid, analyze them to find the ones you to roll back. When you set the filters, you can select how to present the results. ApexSQL Log can automatically create undo or redo scripts, export the transactions into an XML, HTML, CSV, SQL, or SQL Bulk file, and create a batch file that you can use for unattended transaction log reading. In this example, I will open the results in the grid, as I want to analyze them before rolling back the transactions. The results contain information about the transaction, as well as who and when made it. For UPDATEs, ApexSQL Log shows both old and new values, so you can easily see what has happened. To create an UNDO script that rolls back the changes, select the transactions you want to roll back and click Create undo script in the menu. For the DELETE statement selected in the screenshot above, the undo script is: INSERT INTO [Sales].[PersonCreditCard] ([BusinessEntityID], [CreditCardID], [ModifiedDate]) VALUES (297, 8010, '20050901 00:00:00.000') When it comes to rolling back database changes, ApexSQL Log has a big advantage, as it rolls back only specific transactions, while leaving all other transactions that occurred at the same time range intact. That makes ApexSQL Log a good solution for rolling back inadvertent data and schema changes on your SQL Server databases. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: ApexSQL

    Read the article

  • When to use Aspect Oriented Architecture (AOA/AOD)

    When is it appropriate to use aspect oriented architecture? I think the only honest answer to this question is that it depends on the context for which the question is being asked. There really are no hard and fast rules regarding the selection of an architectural model(s) for a project because each model provides good and bad benefits. Every system is built with a unique requirements and constraints. This context will dictate when to use one type of architecture over another or in conjunction with others. To me aspect oriented architecture models should be a sub-phase in the architectural modeling and design process especially when creating enterprise level models. Personally, I like to use this approach to create a base architectural model that is defined by non-functional requirements and system quality attributes.   This general model can then be used as a starting point for additional models because it is targets all of the business key quality attributes required by the system.Aspect oriented architecture is a method for modeling non-functional requirements and quality attributes of a system known as aspects. These models do not deal directly with specific functionality. They do categorize functionality of the system. This approach allows a system to be created with a strong emphasis on separating system concerns into individual components. These cross cutting components enables a systems to create with compartmentalization in regards to non-functional requirements or quality attributes.  This allows for the reduction in code because an each component maintains an aspect of a system that can be called by other aspects. This approach also allows for a much cleaner and smaller code base during the implementation and support of a system. Additionally, enabling developers to develop systems based on aspect-oriented design projects will be completed faster and will be more reliable because existing components can be shared across a system; thus, the time needed to create and test the functionality is reduced.   Example of an effective use of Aspect Oriented ArchitectureIn my experiences, aspect oriented architecture can be very effective with large or more complex systems. Typically, these types of systems have a large number of concerns so the act of defining them is very beneficial for reducing the system’s complexity because components can be developed to address each concern while exposing functionality to the other system components. The benefits to using the aspect oriented approach as the starting point for a system is that it promotes communication between IT and the business due to the fact that the aspect oriented models are quality attributes focused so not much technical understanding is needed to understand the model.An example of this can be in developing a new intranet website. Common Intranet Concerns: Error Handling Security Logging Notifications Database connectivity Example of a not as effective use of Aspect Oriented ArchitectureAgain in my experiences, aspect oriented architecture is not as effective with small or less complex systems in comparison.  There is no need to model concerns for a system that has a limited amount of them because the added overhead would not be justified for the actual benefits of creating the aspect oriented architecture model.  Furthermore, these types of projects typically have a reduced time schedule and a limited budget.  The creation of the Aspect oriented models would increase the overhead of a project and thus increase the time needed to implement the system. An example of this is seen by creating a small application to poll a network share for new files and then FTP them to a new location.  The two primary concerns for this project is to monitor a network drive and FTP files to a new location.  There is no need to create an aspect model for this system because there will never be a need to share functionality amongst either of these concerns.  To add to my point, this system is so small that it could be created with just a few classes so the added layer of componentizing the concerns would be complete overkill for this situation. References:Brichau, Johan; D'Hondt, Theo. (2006) Aspect-Oriented Software Development (AOSD) - An Introduction. Retreived from: http://www.info.ucl.ac.be/~jbrichau/courses/introductionToAOSD.pdf

    Read the article

  • Duke's Choice Award Ceremony

    - by Tori Wieldt
    The 2012 Duke's Choice Awards winners and their creative, Java-based technologies and Java community contributions were honored after the Sunday night JavaOne keynotes. Sharat Chander, Group Director for Java Technology Outreach, presented the awards. "Having the community participate directly in both submission and selection truly shows how we are driving exposure of the innovation happening in the Java community," he said. Apache Software Foundation Hadoop Project The Apache Software Foundation’s Hadoop project, written in Java, provides a framework for distributed processing of big data sets across clusters of computers, ranging from a few servers to thousands of machines. This harnessing of large data pools allows organizations to better understand and improve their business. AgroSense Project Improving farming methods to feed a hungry world is the goal of AgroSense, an open source farm information management system built in Java and the NetBeans platform. AgroSense enables farmers, agribusinesses, suppliers and others to develop modular applications that will easily exchange information through a common underlying NetBeans framework. JDuchess Rather than focus on a specific geographic area like most Java User Groups (JUGs), JDuchess fosters the participation of women in the Java community worldwide. The group has more than 500 members in 60 countries, and provides a platform through which women can connect with each other and get involved in all aspects of the Java community. Jelastic, Inc. Moving existing Java applications to the cloud can be a daunting task, but startup Jelastic, Inc. offers the first all-Java platform-as-a-service (PaaS) that enables existing Java applications to be deployed in the cloud without code changes or lock-in. Liquid Robotics Robotics – Liquid Robotics is an ocean data services provider whose Wave Glider technology collects information from the world’s oceans for application in government, science and commercial applications. The organization features the “father of Java” James Gosling as its chief software architect. London Java Community The second user group receiving a Duke’s Choice Award this year, the London Java Community (LJC) and its users have been active in the OpenJDK, the Java Community Process (JCP) and other efforts within the global Java community. NATO The first-ever Community Choice Award goes to the MASE Integrated Console Environment (MICE) in use at NATO. Built in Java on the NetBeans platform, MICE provides a high-performance visualization environment for conducting air defense and battle-space operations. Parleys.com E-learning specialist Parleys.com, based in Brussels, Belgium, uses Java technologies to bring online classes and full IT conferences to desktops, laptops, tablets and mobile devices. Parleys.com has hosted more than 1,700 conferences—including Devoxx and JavaOne—for more than 800,000 unique visitors. Student Nokia Developer Group This year’s student winner, Ram Kashyap, is the founder and president of the Nokia Student Network, and was profiled in the “The New Java Developers” feature in the March/April 2012 issue of Java Magazine. Since then, Ram has maintained a hectic pace, graduating from the People’s Education Society Institute of Technology in Bangalore, India, while working on a Java mobile startup and training students on Java ME. United Nations High Commissioner for Refugees The United Nations High Commissioner for Refugees (UNHCR) is on the front lines of crises around the world, from civil wars to natural disasters. To help facilitate its mission of humanitarian relief, the UNHCR has developed a light-client Java application on the NetBeans platform. The Level One registration tool enables the UNHCR to collect information on the number of refugees and their water, food, housing, health, and other needs in the field, and combines that with geocoding information from various sources. This enables the UNHCR to deliver the appropriate kind and amount of assistance where it is needed. You can read more about the winners in the current issue of Java Magazine.

    Read the article

  • JDeveloper 11g R1 (11.1.1.4.0) - New Features on ADF Desktop Integration Explained

    - by juan.ruiz
    One of the areas that introduced many new features on the latest release (11.1.1.4.0)  of JDeveloper 11g R1 is ADF Desktop integration - in this article I’ll provide an overview of these new features. New ADF Desktop Integration Ribbon in Excel - After installing the ADF desktop integration add-in and depending on the mode in which you open the desktop integration workbook, the ADF Desktop integration ribbon for design time and runtime are displayed as a separate tab within Excel. In previous version the ADF Desktop integration environment used to be placed inside the add-ins tab. Above you can see both, design time ribbon as well as runtime ribbon. On the design time ribbon you can manage the workbook and worksheet properties, worksheet component properties, diagnostics, execution and publication of the workbook. The runtime version of the ribbon is totally customizable and represents what it used to be the runtime menu on the spreadsheet, in this ribbon you can include all the operations and actions that could be executed by the end user while working with the spreadsheet data. Diagnostics - A very important aspect for developers is how to debug or verify the interactions of the client with the server, for that ADF desktop integration has provided since day one a series of diagnostics tools. In this release the diagnostics tools are more visible and are really easy to configure. You can access the client console while testing the workbook, or you can simple dump all the messages to a log file – having the ability of setting the output level for both. Security - There are a number of enhancements on security but the one with more impact for developers is tha security now is optional when using ADF Desktop Integration. Until this version every time that you wanted to work with ADFdi it was a must that the application was previously secured. In this release security is optional which means that if you have previously defined security on your application, then you must secure the ADFdi servlet as explained in one of my previous (ADD LINK) posts. In the other hand, if but the time that you start working with ADFdi you have not defined security, you can test and publish your workbooks without adding security. Support for Continuous Integration - In this release we have added tooling for continuous integration building. in the ADF desktop integration space, the concept translates to adding functionality that developers can use to publish ADFdi workbooks as part of their entire application build. For that purpose, we have a publish tool that can be easily invoke from an ANT task such that all the design time workbooks are re-published into the latest version of the application building process. Key Column - At runtime, on any worksheet containing editable tables you will notice a new additional column called the key column. The purpose of this column is to make the end user aware that all rows on the table need to be selected at the time of sorting. The users cannot alter the value of this column. From the developers points of view there are no steps required in order to have the key column included into the worksheets. Installation and Creation of New Workbooks - Both use cases can be executed now directly from JDeveloper. As part of the Tools menu options the developer can install the ADF desktop integration designer. Also, creating new workbooks that previously was done through that convert tool shipped with JDeveloper is now automatic done from the New Gallery. Creating a new ADFdi workbook adds metadata information information to the Excel workbook so you can work in design time. Other Enhancements Support for Excel 2010 and the ADF components ready-only enabled don’t allow to change its value – the cell in Excel is automatically protected, this could cause confusion among customers of previous releases.

    Read the article

  • SharePoint 2013 Developer Ramp-Up - Part 1

    Today I had a little spare time during the morning hours and I decided that after checking MVA that I'm going to query the available course material over at Pluralsight. Wow, thanks to fantastic corporations and acquisitions there are lots of courses available. Nicely split by SharePoint version as well as particular interest group. Additionally, I found a couple of online blogs and community sites that I'm going to visit regularly during the next couple of weeks. Today's resource(s) Of course, I'm "all in" for the latest developer resources: SharePoint 2013 Developer Ramp-Up - Part 1 - Understanding the Platform and Developer Experience SharePoint 2013 Developer Ramp-Up - Part 2 SharePoint 2013 Developer Ramp-Up - Part 3 SharePoint 2013 Developer Ramp-Up - Part 4 SharePoint 2013 Developer Ramp-Up - Part 5 SharePoint 2013 Developer Ramp-Up - Part 6 I guess, I'm going to stick to the Pluralsight library until the end of this week. We'll see... Anyway, apart from the video material I came across a couple of other websites which I'd like to list here, too. That's mainly for personal reference instead of bookmarking in the browser, I'll use my own blog for that purpose. Atkinson's SharePoint Blog Düsseldorfer Jung Doerflers SharePoint Blog SharePoint Community Absolute SharePoint The links are in no preferential order and I added them as soon as I found them. Most probably, I'm going to report about specific articles from those resources during this challenge. So, stay tuned and I try to provide more details on certain topics. Takeaway First contact with the 'real stuff' in order to get an idea about software development in Microsoft SharePoint and beyond. Unfortunately and as already expected, the marketing department over at Microsoft seemed to have nothing better to do than to invent new names and baptise literally the same product with every release. Luckily, the release cycles between versions have been three years (roughly) - 2007, 2010, and 2013. Nonetheless, there will be a lot of version-specfic issues to tackle during this learning phase. Especially, when it's about historical expressions like 'WSS'* like I had it yesterday... It's going to be exciting and demanding to catch up with roughly 6-7 years of development and changes. Okay, let's face it. * WSS stands for Windows SharePoint Services 3.0 which forms the 'core engine' of SharePoint 2007. Part 1 of Andrew Connell's series on SharePoint 2013 for developers provides a brief history and overview of the various product names and their relation to the actual SharePoint version. I guess, I might create a cheat-sheet or something comparable in order to reduce the level of confusion while reading through other material: SharePoint 2007 (aka SharePoint v3 aka SharePoint 12) Windows SharePoint Services (WSS) 3.0 Microsoft Office SharePoint Server (MOSS) 2007 .NET Framework 3.0, 32-bit or 64-bit OS SharePoint 2010 (aka SharePoint v4 aka SharePoint 14) Microsoft SharePoint Foundation (SPF) 2010 Microsoft SharePoint Server (SPS) 2010 .NET Framework 3.5 SP1, 64-bit OS only SharePoint 2013 Microsoft SharePoint Foundation (SPF) 2013 Microsoft SharePoint Server (SPS) 2013 .NET Framework 4.5, 64-bit OS only After this quick excursion it is getting more interesting. SharePoint 2013 has a number of Development Practices and Techniques under the hood, and it will be quite a decision process depending on the task requirements to choose the correct path to go. At the moment, the following two options seem to be my future fields of operation: Client-Side Object Model (CSOM) REST API and OData syntax As part of my job assignment, I see myself developing within Visual Studio 2012/2013. Most probably the client development in C# will be using CSOM but of course I'll keep an eye on the REST API, too. JavaScript has quite a momentum since a while and it would a shame to ignore this type of opportunity and possibilities.

    Read the article

  • What's up with LDoms: Part 9 - Direct IO

    - by Stefan Hinker
    In the last article of this series, we discussed the most general of all physical IO options available for LDoms, root domains.  Now, let's have a short look at the next level of granularity: Virtualizing individual PCIe slots.  In the LDoms terminology, this feature is called "Direct IO" or DIO.  It is very similar to root domains, but instead of reassigning ownership of a complete root complex, it only moves a single PCIe slot or endpoint device to a different domain.  Let's look again at hardware available to mars in the original configuration: root@sun:~# ldm ls-io NAME TYPE BUS DOMAIN STATUS ---- ---- --- ------ ------ pci_0 BUS pci_0 primary pci_1 BUS pci_1 primary pci_2 BUS pci_2 primary pci_3 BUS pci_3 primary /SYS/MB/PCIE1 PCIE pci_0 primary EMP /SYS/MB/SASHBA0 PCIE pci_0 primary OCC /SYS/MB/NET0 PCIE pci_0 primary OCC /SYS/MB/PCIE5 PCIE pci_1 primary EMP /SYS/MB/PCIE6 PCIE pci_1 primary EMP /SYS/MB/PCIE7 PCIE pci_1 primary EMP /SYS/MB/PCIE2 PCIE pci_2 primary EMP /SYS/MB/PCIE3 PCIE pci_2 primary OCC /SYS/MB/PCIE4 PCIE pci_2 primary EMP /SYS/MB/PCIE8 PCIE pci_3 primary EMP /SYS/MB/SASHBA1 PCIE pci_3 primary OCC /SYS/MB/NET2 PCIE pci_3 primary OCC /SYS/MB/NET0/IOVNET.PF0 PF pci_0 primary /SYS/MB/NET0/IOVNET.PF1 PF pci_0 primary /SYS/MB/NET2/IOVNET.PF0 PF pci_3 primary /SYS/MB/NET2/IOVNET.PF1 PF pci_3 primary All of the "PCIE" type devices are available for SDIO, with a few limitations.  If the device is a slot, the card in that slot must support the DIO feature.  The documentation lists all such cards.  Moving a slot to a different domain works just like moving a PCI root complex.  Again, this is not a dynamic process and includes reboots of the affected domains.  The resulting configuration is nicely shown in a diagram in the Admin Guide: There are several important things to note and consider here: The domain receiving the slot/endpoint device turns into an IO domain in LDoms terminology, because it now owns some physical IO hardware. Solaris will create nodes for this hardware under /devices.  This includes entries for the virtual PCI root complex (pci_0 in the diagram) and anything between it and the actual endpoint device.  It is very important to understand that all of this PCIe infrastructure is virtual only!  Only the actual endpoint devices are true physical hardware. There is an implicit dependency between the guest owning the endpoint device and the root domain owning the real PCIe infrastructure: Only if the root domain is up and running, will the guest domain have access to the endpoint device. The root domain is still responsible for resetting and configuring the PCIe infrastructure (root complex, PCIe level configurations, error handling etc.) because it owns this part of the physical infrastructure. This also means that if the root domain needs to reset the PCIe root complex for any reason (typically a reboot of the root domain) it will reset and thus disrupt the operation of the endpoint device owned by the guest domain.  The result in the guest is not predictable.  I recommend to configure the resulting behaviour of the guest using domain dependencies as described in the Admin Guide in Chapter "Configuring Domain Dependencies". Please consult the Admin Guide in Section "Creating an I/O Domain by Assigning PCIe Endpoint Devices" for all the details! As you can see, there are several restrictions for this feature.  It was introduced in LDoms 2.0, mainly to allow the configuration of guest domains that need access to tape devices.  Today, with the higher number of PCIe root complexes and the availability of SR-IOV, the need to use this feature is declining.  I personally do not recommend to use it, mainly because of the drawbacks of the depencies on the root domain and because it can be replaced with SR-IOV (although then with similar limitations). This was a rather short entry, more for completeness.  I believe that DIO can usually be replaced by SR-IOV, which is much more flexible.  I will cover SR-IOV in the next section of this blog series.

    Read the article

  • SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

    - by jorg
    We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

    Read the article

  • Windows Phone 7 Series - Tools and Resources

    - by TechTwaddle
    Unless you've been living in the caves of Lascaux for the past couple of days, you probably know what's happening in the world of Windows Phone. Microsoft unveiled the developer tools required to develop applications and games for Windows Phone 7 at MIX10 a couple of days back. Silverlight and XNA being the major frameworks, no big surprise there. And the best news of all is that all the development tools are free! So if you are planning to develop apps for Windows Phone 7, read on. The first place, or more appropriately hub, for you is the Windows Phone Developer Portal. It has most of the information you need to get you started. Now there is a ton of information available at other places too. In this post, I take time to put all the information that I found useful at one place, and I'll keep updating this as and when I find new stuff.   Setting up the development environment 1. Install Windows Phone Developer Tools CTP (Community Technology Preview) This will install Visual Studio 2010 Express, Silverlight, XNA framework and emulator for Windows Phone 7. It also installs a few support tools. 2. Expression Blend 4 for Windows Phone:     - Install Expression Blend 4 beta     - Install Expression Blend Add-in Preview for Windows Phone     - Install Expression Blend SDK Preview for Windows Phone Installing the above tools should set your machine up for development. I installed the tools on my Windows Vista SP1 machine and the process went smoothly without running into any major hitch. Note that the tools won't install on Windows XP, read the release notes of the CTP. Resources and Documentation 1. Microsoft Windows Phone 7 Series Developer Training Kit 2. Programming Windows Phone 7 Series by Charles Petzold. Contains few chapters only. Gives a good preview. 3. MSDN documentation for Windows Phone 7 Development 4. A sample chapter from Learning Windows Phone Programming [PDF] by Yochay Kiriaty and Jaime Rodriguez. Complete book will be available at a later time. 5. Windows Phone 7 Developer Forum - where you can ask questions and problems you run into and the experts are there to help you. 6. For Silverlight visit silverlight.net and for XNA game development, the XNA Creators Club is the place to go, also make sure you follow Michael Klutcher's and Shawn Hargreaves' blog. 7. And finally the MIX'10 website. Most of the sessions will be available for download later (some are already available). Click on the Windows Phone tag to get all the session details and downloads.   If you are completely new to Silverlight and XNA (like me), and C# makes some sense to you then I suggest you go through the Developer Training Kit. It gives a good start and ramps you up pretty quickly.

    Read the article

  • ArchBeat Link-o-Rama Top 10 - September 16-22, 2012

    - by Bob Rhubart
    The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of September 16-22, 2012. The Real Architects of LA: OTN Architect Day in Los Angeles - Oct 25No gossip. No drama. No hair pulling. Just a full day of technical sessions and peer interaction focused on using Oracle technologies in today's cloud and SOA architectures. The event is free, but seating is limited, so register now. Thursday October 25, 2012. 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. OIM-OAM-OAAM integration using TAP – Request Flow you must understand!! | Atul KumarAtul Kumar's post addresses "key points and request flow that you must understand" when integrating three Oracle Identity Management product Oracle Identity Management, Oracle Access Management, and Oracle Adaptive Access Manager. Cloud, automation drive new growth in SOA governance market | ZDNet "SOA governance tools and processes learned over the past decade are now underpinning cloud projects as they scale across enterprises," reports Joe McKendrick. But there remains a lack of understanding about SOA Governance. DevOps Basics: Track Down High CPU Thread with ps, top and the new JDK7 jcmd Tool | Frank Munz "The approach is very generic and works for WebLogic, Glassfish or any other Java application," say Frank Munz. "UNIX commands in the example are run on CentOS, so they will work without changes for Oracle Enterprise Linux or RedHat. Creating the thread dump at the end of the video is done with the jcmd tool from JDK7." Frank has captured the process in the posted video. Oracle OpenWorld 2012 Hands-on Lab: "Leading Your Everyday Application Integration Projects with Enterprise SOA" Yet another session to squeeze into your already-jammed Oracle OpenWorld schedule. This hands-on lab focuses on how "Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects." Loving VirtualBox 4.2… | The ORACLE-BASE Blog Is it wrong for a man to love a technology? Oracle ACE Director Tim Hall has several very good reasons for his feelings… ADF Create and CreateInsert Operations for ADF Table | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis answers the question, "What operation is best to use to insert a new row into an ADF table, Create or CreateInsert?" Fault Handling Slides and Q&A | Ronald van Luttikhuizen Oracle ACE Director Ronald van Luttikhuizen shares the slides and a Q&A transcript from a presentation he and fellow ACE Director Guido Schmutz gave at the recent Oracle OpenWorld and JavaOne preview event organized by AMIS Technology. Why IT is a profession in 'flux' | ZDNet I usuallly don't post two items from the same person in one day, but this post from ZDNet blogger Joe McKendrick deals with some critical issues affecting those in IT. As McKendrick puts it: "IT professionals are under considerable pressure to deliver more value to the business, versus being good at coding and testing and deploying and integrating." Running RichFaces on WebLogic 12c | Markus Eisele "With all the JMS magic and the different provider checks in the showcase this has become some kind of a challenge to simply build and deploy it," says Oracle ACE Director Markus Eisele. His detailed post will help you to meet that challenge. Thought for the Day "Less is more." — Ludwig Mies van der Rohe (March 27, 1886 – August 17, 1969) Source: BrainyQuote.com

    Read the article

  • Windows 8 Camp&ndash;Ways to Prepare

    - by Lori Lalonde
    When Windows 8 was announced at the BUILD conference back in September, it created quite a buzz among the developer community. By the spring of 2012,  Windows 8 Developer Camps started popping up everywhere imaginable. I received a lot of questions from CTTDNUG members about whether or not we would be hosting one locally. If you recall my post about the Windows Phone/Azure Developer Workshop that CTTDNUG hosted back in March, you’ll remember that the biggest hurdle to overcome when planning this type of event was finding the right venue. It took some time, but I finally found a venue that was available and provided the prerequisites needed to ensure this camp is a success. I am very excited that CTTDNUG will be hosting a Windows 8 Camp this summer in the Kitchener/Waterloo area. In fact, it’s coming up in less than 2 weeks. Clearly other developers are excited as well, because our registration numbers show that the event is already 70% full! On top of that, I was fortunate enough to also book two well-known evangelists to present and teach at this full day developer camp: Andrei Marukovich and Atley Hunter. This was the icing on the cake. With the content provided by Microsoft, and two local experts that live and breathe Windows 8 development, I know that I, along with other developers that attend this event, will have the opportunity to maximize our learning potential and hit the ground running. If you plan on attending a Windows 8 Developer Camp soon, and want to ensure you get the most “bang for your buck” (figuratively speaking, since these camps are free), there are some things you can do to prepare before the big day: 1) Install the prerequisites on your own device before the big day I can’t stress this enough. Otherwise, you will be spending valuable time during the hands-on period downloading and installing what is needed, rather than digging into the development and using that time to ask the experts on-hand about programming challenges, issues, questions you may have with respect to your development. Prerequisites: Windows 8 Release Preview Visual Studio 2012 RC Download the Windows 8 SDK Samples 2) Purchase, download, and read Charles Petzold’s newest book:  Programming Windows 6th Edition This is a great introduction to the type of content you will be learning about during the camp. Doing some light reading beforehand might raise some questions about the concepts discussed in the book, which will give you the opportunity to write them down and bring them with you to the camp. The experts on hand will be able to answer them for you. 3) Make use of the freebies that are available Telerik has recently released a preview of their RadControls for Metro. You can sign up to receive a license code to give you access to install the preview for free and start playing around with it. Syncfusion also offers a free download of their Metro Studio package, which is a collection of metro style icons that you can customize and use in your own applications. Last but not least, once you’ve installed the Windows 8 Release Preview on your own device, go to the Windows 8 Store and download a handful of the free apps that are available. Testing out other Metro apps may give you ideas of what you can do in your own apps and analyze what features you like: application flow, type of animations used, concepts that were leveraged, how live tiles were used, etc. I hope you found these tips to be useful as you embark on a new development journey! Although this post focused on how to prepare for a Windows 8 camp, the same ideas are there whichever developer camp/workshop/event you attend. Learning does not begin and end on the day of the event. Attending a developer camp is just one step of many to master whatever technology you are interested in. It is a continuous process, which is fully maximized when you do your homework beforehand, actively participate during,  and follow up by putting what you learned to practice afterwards. Happy coding!

    Read the article

  • Today's Links (6/30/2011)

    - by Bob Rhubart
    James Gosling Says He Doesn't Care About Java But here's the rest of the story: "What I really care about is the Java Virtual Machine as a concept," says Gosling, "because that is the thing that ties it all together; it's the thing that makes Java the language possible; it's the thing that makes things work on all kinds of different platforms; and it makes all kinds of languages able to coexist." Virtual Developer Day: SOA Accelerate Your Development with Oracle SOA Suite. Learn how in this FREE on-line workshop with Hands-on labs July 12th 9 am to 1:30 PM PST" July 12th 9 am to 1:30 PM PST Podcast: Toronto Architect Day Panel Discussion Part 3 (of 4) is now available, in which the panel (including Oracle ACE Director Cary Millsap and InfoQ editor and co-founder Floyd Marinescu) discusses public vs private cloud as the best strategy for small businesses and start-ups. WebLogic Weekly for June 27th, 2011 | James Bayer Bayer shares the latest resources for those with WebLogic on the brain. Griffiths Waite at Oracle Open World | Mark Simpson Oracle ACE Director Mark Simpson share information on the presentations he's scheduled to give at Oracle OpenWorld San Francisco 2011. Kscope Solid Service Bus Implementations Peter Paul van de Beek's Kscope11 presentation "is aimed at supporting architects and especially developers to choose the right integration infrastructure for a job." Migration To Java EE 6 With Spring 3 - ...Could Become "Interesting" | Adam Bien "Put simply, big data implies datasets so large they can't normally be processed using a standard transactional database," says David Dorf. "The term 'noSQL' is often used in this context as well." Book Review: "Designing With the Mind In Mind" | Abhinav Agarwal According to Abhinav Agarwal, Jeff Johnson's new book is about "the theory of how the mind perceives information, of how humans understand what they read, and how our eyes are attuned to paying attention to not just what's happening in front of us but also at the periphery of our vision." BPM 11g Advanced Workshop | Martien van den Akker Martien van den Akker shares his thoughts on both the workshop he recently attended and on the Oracle BPM 11g product. Fusion Applications - What You Need To Know: Product Families | Floyd Teter "Fusion Applications are organized into seven groups of related products called Product Families," observes Oracle ACE Director Floyd Teter. "While the product features are organized according to the Business Process Model and can cross the boundaries of product families, the product family groupings are an easy way to wrap your mind around Fusion Apps." Grid Control: Refreshing Weblogic Domains | Dave Best Dave Best shares tips for avoiding problems when using grid control to centrally manage/monitor your environment. Webcast: Oracle to Announce Datanomic Integration Plans The combination of Datanomic technology and the previous acquisition of Silver Creek Systems will deliver a complete, integrated and best-of-breed solution for Data Quality. Learn about Oracle’s strategy and product plans and how the new products acquired from Datanomic will impact your organization. July 19, 2011, 8:00am PT / 11:00am ET. Speakers include Michael Weingartner (Vice President, Product Development, Oracle), Martin Boyd (Senior Director, Product Strategy, Oracle), and Dain Hansen (Director, Product Marketing, Fusion Middleware, Oracle).

    Read the article

  • Ubuntu 13.04 installation issues: unable to handle kernel paging request error

    - by user173944
    I wish I could say that I’ve done more for the Linux community as of recent but I am very VERY new to all of this and I feel very much in over my head. I figured I would install Ubuntu. on my computer and then I would learn and contribute to the community simultaneously. I will try to be as detailed as I can, please ask questions if you need clarification. I installed Ubuntu. 13.04 (64-bit) on my dell Inspiron 1501. This has an AMD Turion 64-bit TL-56 1.8 Ghz mobile processor. It is a dual core. It has an ATI Radeon Xpress 1150 chipset in it as well. As of right now I only have a total of 2Ghz ram, however I was planning on upgrading that in the near future so I opted for the 64-bit Ubuntu. 13.04. I first tried the live CD and everything seemed to be functioning correctly other than the wireless (but that's not the issue at hand, there are plenty of guides on the internet on how to get that functioning). The internet worked just fine when it was plugged in so no issues there. However, once I went from that to installing 13.04 (just 13.04, no dual partitioning... I want this computer to run strictly Ubuntu.) it did not work. It took me into a shell that I could not type anything into. In this shell it said Bug: unable to handle kernel paging and then it called a bunch of traces and froze up. I had to hard reset the laptop. I tried the boot-repair program multiple times with many different settings and typically after starting up the laptop would say something along the lines of recursive errors. will attempt to fix and then it would attempt to fix a couple of things, and then the computer would freeze up after the text said end trace... so I had to hard reset it again. I'm not an impatient person either, when I say it would freeze up it would be for a period of at least 15 minutes each time before I decided to hard reset. I attempted to install 12.10 on it instead and I got the same exact message, and when I ran boot-repair it did the same exact thing as before. I am currently in the process of running memtest64+ on the computer's memory, though I really don't believe that, nor any of the hardware is at fault due to the fact that it was still running windows vista perfectly when I had decided to switch over to Ubuntu. so far the memtest has came back just fine without any errors, but I’ve only been running it for approximately an hour. So this is the situation I’m in. I did notice when I was using the live disk that the video driver needed updated so I performed that, though I’m fairly certain that has nothing to do with this. I have also attempted (though I’m not certain that my attempt was successful in accomplishing what I had planned) to manually edit the grub settings by making acpi=0 along top of adding nomodeset to the boot commands. Like I said, I’m not sure I did that correctly though, but I’m fairly certain I did. If anyone needs any more information I will be more than happy to provide it, I will post back once I get the full results of the memtest. I very much appreciate any ideas anyone else has, I’ve been at this for a few days to no avail... thank you

    Read the article

  • HTTP Module in detail

    - by Jalpesh P. Vadgama
    I know this post may sound like very beginner level. But I have already posted two topics regarding HTTP Handler and HTTP module and this will explain how http module works in the system. I have already posted What is the difference between HttpModule and HTTPHandler here. Same way I have posted about an HTTP Handler example here as people are still confused with it. In this post I am going to explain about HTTP Module in detail. What is HTTP Module As we all know that when ASP.NET Runtimes receives any request it will execute a series of HTTP Pipeline extensible objects. HTTP Module and HTTP handler play important role in extending this HTTP Pipelines. HTTP Module are classes that will pre and post process request as they pass into HTTP Pipelines.  So It’s one kind of filter we can say which will do some procession on begin request and end request. If we have to create HTTP Module we have to implement System.Web.IHttpModule interface in our custom class. An IHTTP Module contains two method dispose where you can write your clean up code and another is Init where your can write your custom code to handle request. Here you can your event handler that will execute at the time of begin request and end request. Let’s create an HTTP Module which will just print text in browser with every request. Here is the code for that. using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace Experiment { public class MyHttpModule:IHttpModule { public void Dispose() { //add clean up code here if required } public void Init(HttpApplication context) { context.BeginRequest+=new EventHandler(context_BeginRequest); context.EndRequest+=new EventHandler(context_EndRequest); } public void context_BeginRequest(object o, EventArgs args) { HttpApplication app = (HttpApplication)o; if (app != null) { app.Response.Write("<h1>Begin Request Executed</h1>"); } } public void context_EndRequest(object o, EventArgs args) { HttpApplication app = (HttpApplication)o; if (app != null) { app.Response.Write("<h1>End Request Executed</h1>"); } } } } Here in above code you can see that I have created two event handler context_Beginrequest and context_EndRequest which will execute at begin request and end request when request are processed. In this event handler I have just written a code to print text on browser. Now In order enable this HTTP Module in HTTP pipeline we have to put a settings in web.config  HTTPModules section to tell which HTTPModule is enabled. Below is code for HTTPModule. <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <httpModules> <add name="MyHttpModule" type="Experiment.MyHttpModule,Experiment"/> </httpModules> </system.web> </configuration> Now I just have created a sample webform with following code in HTML like following. <form id="form1" runat="server"> <B>test of HTTP Module</B> </form> Now let’s run this web form in browser and you can see here it the output as expected.   Technorati Tags: HTTPModule,ASP.NET,Request

    Read the article

  • Ubuntu 12.04 LTS initramfs-tools dependency issue

    - by Mike
    I know this has been asked several times, but each issue and resolution seems different. I've tried almost everything I could think of, but I can't fix this. I have a VM (VMware I think) running 12.04.03 LTS which has stuck dependencies. The VM is on a rented host, running a live system so I don't want to break it (further). uname -a Linux support 3.5.0-36-generic #57~precise1-Ubuntu SMP Thu Jun 20 18:21:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Some more: sudo apt-get update [sudo] password for tracker: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. initramfs-tools : Depends: initramfs-tools-bin (< 0.99ubuntu13.1.1~) but 0.99ubuntu13.3 is installed E: Unmet dependencies. Try using -f. sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: initramfs-tools The following packages will be upgraded: initramfs-tools 1 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 2 not fully installed or removed. Need to get 0 B/50.3 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y dpkg: dependency problems prevent configuration of initramfs-tools: initramfs-tools depends on initramfs-tools-bin (<< 0.99ubuntu13.1.1~); however: Version of initramfs-tools-bin on system is 0.99ubuntu13.3. dpkg: error processing initramfs-tools (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. dpkg: dependency problems prevent configuration of apparmor: apparmor depends on initramfs-tools; however: Package initramfs-tools is not configured yet. dpkg: error processing apparmor (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: initramfs-tools apparmor E: Sub-process /usr/bin/dpkg returned an error code (1) If I look at the policy behind initramfs-tools / bin I get: apt-cache policy initramfs-tools initramfs-tools: Installed: 0.99ubuntu13.1 Candidate: 0.99ubuntu13.3 Version table: 0.99ubuntu13.3 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages *** 0.99ubuntu13.1 0 100 /var/lib/dpkg/status 0.99ubuntu13 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages apt-cache policy initramfs-tools-bin initramfs-tools-bin: Installed: 0.99ubuntu13.3 Candidate: 0.99ubuntu13.3 Version table: *** 0.99ubuntu13.3 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages 100 /var/lib/dpkg/status 0.99ubuntu13 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages So the issue seems to be I have 0.99ubuntu13.3 for initramfs-tools-bin yet 0.99ubuntu13.1 for initramfs-tools, and can't upgrade to 0.99ubuntu13.3. I've performed apt-get clean/autoclean/install -f/upgrade -f many times but they won't resolve. I can think of only 2 other 'solutions': Edit the dpkg dependency list to trick it into doing the installation with a broken dependency. This seems very dodgy and it would be a last resort Downgrade both initramfs-tools and initramfs-tools-bin to 0.99ubuntu13 from the precise/main sources and hope that would get them in step. However I'm not sure if this will be possible, or whether it would introduce more issues. I'm not sure how this situation arise in the first place. /boot was 96% full; it's now 56% full (it's tiny - 64MB ... this is what I got from the hosting company). Can anyone offer advice please?

    Read the article

  • The theory of evolution applied to software

    - by Michel Grootjans
    I recently realized the many parallels you can draw between the theory of evolution and evolving software. Evolution is not the proverbial million monkeys typing on a million typewriters, where one of them comes up with the complete works of Shakespeare. We would have noticed by now, since the proverbial monkeys are now blogging on the Internet ;-) One of the main ideas of the theory of evolution is the balance between random mutations and natural selection. Random mutations happen all the time: millions of mutations over millions of years. Most of them are totally useless. Some of them are beneficial to the evolved species. Natural selection favors the beneficially mutated species. Less beneficial mutations die off. The mutated rabbit doesn't have to be faster than the fox. It just has to be faster than the other rabbits.   Theory of evolution Evolving software Random mutations happen all the time. Most of these mutations are so bad, the new species dies off, or cannot reproduce. Developers write new code all the time. New ideas come up during the act of writing software. The really bad ones don't get past the stage of idea. The bad ones don't get committed to source control. Natural selection favors the beneficial mutated species Good ideas and new code gets discussed in group during informal peer review. Less than good code gets refactored. Enhanced code makes it more readable, maintainable... A good set of traits makes the species superior to others. It becomes widespread A good design tends to make it easier to add new features, easier to understand the current implementations, easier to optimize for performance...thus superior. The best designs get carried over from project to project. They appear in blogs, articles and books about principles, patterns and practices.   Of course the act of writing software is deliberate. This can hardly be called random mutations. Though it sometimes might seem that code evolves through a will of its own ;-) Does this mean that evolving software (evolution) is better than a big design up front (creationism)? Not necessarily. It's a false idea to think that a project starts from scratch and everything evolves from there. Everyone carries his experience of what works and what doesn't. Up front design is necessary, but is best kept simple and minimal, just enough to get you started. Let the good experiences and ideas help to drive the process, whether they come from you or from others, from past experience or from the most junior developer on your team. Once again, balance is the keyword. Balance design up front with evolution on a daily basis. How do you know what balance is right? Through your own experience of what worked and what didn't (here's evolution again). Notes: The evolution of software can quickly degenerate without discipline. TDD is a discipline that leaves little to chance on that part. Write your test to describe the new behavior. Write just enough code to make it behave as specified. Refactor to evolve the code to a higher standard. The responsibility of good design rests continuously on each developers' shoulders. Promiscuous pair programming helps quickly spreading the design to the whole team.

    Read the article

  • OTN ArchBeat Top 10 for September 2012

    - by Bob Rhubart
    The results are in... Listed below are the Top 10 most popular items shared via the OTN ArchBeat Facebook Page for the month of September 2012. The Real Architects of Los Angeles - OTN Architect Day - Oct 25 No gossip. No drama. No hair pulling. Just a full day of technical sessions and peer interaction focused on using Oracle technologies in today's cloud and SOA architectures. The event is free, but seating is limited, so register now. Thursday October 25, 2012. 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Oracle Fusion Middleware Security: Attaching OWSM policies to JRF-based web services clients "OWSM (Oracle Web Services Manager) is Oracle's recommended method for securing SOAP web services," says Oracle Fusion Middleware A-Team member Andre Correa. "It provides agents that encapsulate the necessary logic to interact with the underlying software stack on both service and client sides. Such agents have their behavior driven by policies. OWSM ships with a bunch of policies that are adequate to most common real world scenarios." His detailed post shows how to make it happen. Oracle 11gR2 RAC on Software Defined Network (SDN) (OpenvSwitch, Floodlight, Beacon) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. Process Oracle OER Events using a simple Web Service | Bob Webster Bob Webster's post "provides an example of a simple web service that processes Oracle Enterprise Repository (OER) Events. The service receives events from OER and utilizes the OER REX API to implement simple OER automations for selected event types." Understanding Oracle BI 11g Security vs Legacy Oracle BI 10g | Christian Screen "After conducting a large amount of Oracle BI 10g to Oracle BI 11g upgrades and after writing the Oracle BI 11g book,"says Oracle ACE Christian Screen, "I still continually get asked one of the most basic questions regarding security in Oracle BI 11g; How does it compare to Oracle BI 10g? The trail of questions typically goes on to what are the differences? And, how do we leverage our current Oracle BI 10g security table schema in Oracle BI 11g?" OIM-OAM-OAAM integration using TAP – Request Flow you must understand!! | Atul Kumar Atul Kumar's post addresses "key points and request flow that you must understand" when integrating three Oracle Identity Management product Oracle Identity Management, Oracle Access Management, and Oracle Adaptive Access Manager. Adding a runtime LOV for a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena illustrates how to customize the parameters tab for a taskflow in WebCenter. Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET | Scott Nelson "It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings," says Scott Nelson. "Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there." 15 Lessons from 15 Years as a Software Architect | Ingo Rammer In this presentation from the GOTO Conference in Copenhagen, Ingo Rammer shares 15 tips regarding people, complexity and technology that he learned doing software architecture for 15 years. WebCenter Content (WCC) Trace Sections | ECM Architect ECM Architect Kevin Smith shares a detailed technical post covering WebCenter Content (WCC) Trace Sections. Thought for the Day "Eventually everything connects - people, ideas, objects. The quality of the connections is the key to quality per se." — Charles Eames (June 17, 1907 – August 21, 1978) Source: SoftwareQuotes.com

    Read the article

  • Guest blog: A Closer Look at Oracle Price Analytics by Will Hutchinson

    - by Takin Babaei
    Overview:  Price Analytics helps companies understand how much of each sale goes into discounts, special terms, and allowances. This visibility lets sales management see the panoply of discounts and start seeing whether each discount drives desired behavior. In Price Analytics monitors parts of the quote-to-order process, tracking quotes, including the whole price waterfall and seeing which result in orders. The “price waterfall” shows all discounts between list price and “pocket price”. Pocket price is the final price the vendor puts in its pocket after all discounts are taken. The value proposition: Based on benchmarks from leading consultancies and companies I have talked to, where they have studied the effects of discounting and started enforcing what many of them call “discount discipline”, they find they can increase the pocket price by 0.8-3%. Yes, in today’s zero or negative inflation environment, one can, through better monitoring of discounts, collect what amounts to a price rise of a few percent. We are not talking about selling more product, merely about collecting a higher pocket price without decreasing quantities sold. Higher prices fall straight to the bottom line. The best reference I have ever found for understanding this phenomenon comes from an article from the September-October 1992 issue of Harvard Business Review called “Managing Price, Gaining Profit” by Michael Marn and Robert Rosiello of McKinsey & Co. They describe the outsized impact price management has on bottom line performance compared to selling more product or cutting variable or fixed costs. Price Analytics manages what Marn and Rosiello call “transaction pricing”, namely the prices of a given transaction, as opposed to what is on the price list or pricing according to the value received. They make the point that if the vendor does not manage the price waterfall, customers will, to the vendor’s detriment. It also discusses its findings that in companies it studied, there was no correlation between discount levels and any indication of customer value. I urge you to read this article. What Price Analytics does: Price analytics looks at quotes the company issues and tracks them until either the quote is accepted or rejected or it expires. There are prebuilt adapters for EBS and Siebel as well as a universal adapter. The target audience includes pricing analysts, product managers, sales managers, and VP’s of sales, marketing, finance, and sales operations. It tracks how effective discounts have been, the win rate on quotes, how well pricing policies have been followed, customer and product profitability, and customer performance against commitments. It has the concept of price waterfall, the deal lifecycle, and price segmentation built into the product. These help product and sales managers understand their pricing and its effectiveness on driving revenue and profit. They also help understand how terms are adhered to during negotiations. They also help people understand what segments exist and how well they are adhered to. To help your company increase its profits and revenues, I urge you to look at this product. If you have questions, please contact me. Will HutchinsonMaster Principal Sales Consultant – Analytics, Oracle Corp. Will Hutchinson has worked in the business intelligence and data warehousing for over 25 years. He started building data warehouses in 1986 at Metaphor, advancing to running Metaphor UK’s sales consulting area. He also worked in A.T. Kearney’s business intelligence practice for over four years, running projects and providing training to new consultants in the IT practice. He also worked at Informatica and then Siebel, before coming to Oracle with the Siebel acquisition. He became Master Principal Sales Consultant in 2009. He has worked on developing ROI and TCO models for business intelligence for over ten years. Mr. Hutchinson has a BS degree in Chemical Engineering from Princeton University and an MBA in Finance from the University of Chicago.

    Read the article

  • Who owns the IP rights of the software without written employment contract? Employer or employee? [closed]

    - by P T
    I am a software engineer who got an idea, and developed alone an integrated ERP software solution over the past 2 years. I got the idea and coded much of the software in my personal time, utilizing my own resources, but also as intern/employee at small wholesale retailer (company A). I had a verbal agreement with the company that I could keep the IP rights to the code and the company would have the "shop rights" to use "a copy" of the software without restrictions. Part of this agreement was that I was heavily underpaid to keep the rights. Recently things started to take a down turn in the company A as the company grew fairly large and new head management was formed, also new partners were brought in. The original owners distanced themselves from the business, and the new "greedy" group indicated that they want to claim the IP rights to my software, offering me a contract that would split the IP ownership into 50% co-ownership, completely disregarding the initial verbal agreements. As of now there was no single written job description and agreement/contract/policy that I signed with the company A, I signed only I-9 and W-4 forms. I now have an opportunity to leave the company A and form a new business with 2 partners (Company B), obviously using the software as the primary tool. There would be no direct conflict of interest as the company A sells wholesale goods. My core question is: "Who owns the code without contract? Me or the company A? (in FL, US)" Detailed questions: I am familiar with the "shop rights", I don't have any problem leaving a copy of the code in the company for them to use/enhance to run their wholesale business. What worries me, Can the company A make any legal claims to the software/code/IP and potential derived profits/interests after I leave and form a company B? Can applying for a copyright of the code at http://www.copyright.gov in my name prevent any legal disputes in the future? Can I use it as evidence for legal defense? Could adding a note specifying the company A as exclusive license holder clarify the arrangements? If I leave and the company A sues me, what evidence would they use against me? On what basis would the sue since their business is in completely different industry than software (wholesale goods). Every single source file was created/stored on my personal computer with proper documentation including a copyright notice with my credentials (name/email/addres/phone). It's also worth noting that I develop significant part of the software prior to my involvement with the company A as student. If I am forced to sign a contract and the company A doesn't honor the verbal agreement, making claims towards the ownership, what can I do settle the matter legally? I like to avoid legal process altogether as my budget for court battles is extremely limited at the moment. Would altering the code beyond recognition and using it for the company B prevent the company A make any copyright claims? My common sense tells me that what I developed is by default mine in terms of IP, unless there is a signed legal agreement stating otherwise. But looking online it may be completely backwards, this really worries me. I understand that this is not legal advice, and I know to get the ultimate answer I need to hire a lawyer. I am only hoping to get some valuable input/experience/advice/opinion from those who were in similar situation or are familiar with the topic. Thank you, PT

    Read the article

  • Why does Ubuntu only detect one USB LAN adapters at a time?

    - by EGO
    I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

    Read the article

< Previous Page | 789 790 791 792 793 794 795 796 797 798 799 800  | Next Page >