Search Results

Search found 50600 results on 2024 pages for 'application lifecycle'.

Page 797/2024 | < Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >

  • The curious case of SOA Human tasks' automatic completion

    - by Kavitha Srinivasan
    A large south-Asian insurance industry customer using Oracle BPM and SOA ran into this. I have survived this ordeal previously myself but didnt think to blog it then. However, it seems like a good idea to share this knowledge with this reader community and so here goes.. Symptom: A human task (in a SOA/BPEL/BPM process) completes automatically while it should have been assigned to a proper user.There are no stack traces, no related exceptions in the logs. Why: The product is designed to treat human tasks that don't have assignees as one that is eligible for completion. And hence no warning/error messages are recorded in the logs. Usecase variant: A variant of this usecase, where an assignee doesnt exist in the repository is treated as a recoverable error. One can find this in the 'pending recovery' instances in EM and reactivate the task by changing the assignees in the bpm workspace as a process owner /administrator. But back to the usecase when tasks get completed automatically... When: This happens when the users/groups assigned to a task are 'empty' or null. This has been seen only on tasks whose assignees are derived from an assignment expression - ie at runtime an XPath is used to determine who to assign the task to. (This should not happen if task assignees are populated via swim-lane roles.) How to detect this in EM For instances that are auto-completed thus, one will notice in the Audit Trail of such instances, that the 'outcome' of the task is empty. The 'acquired by' element will also show as empty/null. Enabling the oracle.soa.services.workflow.* logger in em should print more verbose messages about this. How to fix this The application code needs two fixes: input to HT: The XSLT/XPath used  to set the task 'assignee' and the process itself should be enhanced to handle nulls better. For eg: if no-data-found, set assignees to alternate value, force default assignees etc. output from HT: Additionally, in the application code, check that the 'outcome' of the HT is not-null. If null, route the task to be performed again after setting the assignee correctly. Beginning PS4FP, one should be able to use 'grab' to route back to the task to fire again. Hope this helps. 

    Read the article

  • Window focus confusion in unity

    - by Bryan Agee
    I like having focus prevention set to high, so that I don't have some stupid auto-launched app steal my typing in the middle of something else. Unfortunately, Unity keeps focus on the right window while raising the new one. A number of times, this has caused me to close an application by accident that had control of the menu bar, even though it was underneath the new window. Is there a way to prevent raise without focus?

    Read the article

  • Do keyword-based filenames and URLs really matter?

    - by Justin Scott
    We've developed a dynamic web application which uses URLs such as product.cfm?id=42 but our marketing team says we should use search friendly URLs and put our keywords into the URLs (so it would be product-name.cfm instead). Our developers tell us this will cost more money and take additional time. Is it worth the effort? How important is this to the search engines and will it impact our rankings?

    Read the article

  • New way of creating web applications on Visual Studio 2013

    - by DigiMortal
    Yesterday Visual Studio 2013 Preview was released and now it’s time to play with it. First thing I noticed was the new way how to create web applications. For all web applications there is generic dialog where you can set all important options for your new web application before it is created. Let’s see how it works. Also let’s take a look at new blue theme of Visual Studio 2013. Read more from my new blog @ gunnarpeipman.com

    Read the article

  • CodePlex Daily Summary for Thursday, April 15, 2010

    CodePlex Daily Summary for Thursday, April 15, 2010New ProjectsApplication Logging Repository (ALR): The ALR is a light-weight logging framework that allows applications to log events and exceptions to a central repository.Arkane.FileProperties.DSS: Arkane.FileProperties.Dss is a library for parsing the file header of a .DSS file (as used by Olympus digital dictaphone systems) to obtain time, v...B in conTrol project: This project enables controling log-in and locking your workstation automatically, identifyng you bluetooth.DarkBook: DarkBook is a personal library project.Direct2D for Microsoft .Net: Direct2D, DirectWrite and Windows Imaging wrappers for .Net. This library allows to access Direct2D, DirectWrite and Windows Imaging Windows API f...DJ Ware: DJ Ware is an extensible music player with plugin support and innovative features to organize and explore music files. It is developed with C#, WPF...gpsMe: gpsMe is a Windows Mobile 6.x mapping solution allowing to place the user on a personnalized map. The screen requirements are VGA or WVGA but, you ...jErrorLog: jErrorLog is an error logging component for use in DotNet 2.0 or later applications. It can log error messages to any of the following: database, e...KEMET_API: Java Library (open - source). This library is a help to study egyptian hieroglyphs.Meadow: A web site project for a Swedish floorball team called Slackers. Home page built with ASP.NET 2.0, ASP.NET AJAX and SQL Server 2005.Mustang Math: Mustang Math makes it easier for young children to practice basic math facts on the computer. No keyboard or mouse required - just say the answer!...Net.Formats.oEmbed: oEmbed format implementation in c#. oEmbed is a format for allowing an embedded representation of a URL on third party sites. The simple API allows...Normlize O/R Mapper: Open source O/RM tool that participates with traditional inheritance object models as well as Hibernate/nHibernate style class shells. As I have t...N-Twill Twitter Client for VB.NET: Proyecto de cliente twitter hecho con la libreria TwitterVB2 y hecho en VB.net 2008.SIQM: Spatial Information Quality Management Toolset TIMETABLEASY Web: Under developmentTweetSharp: TweetSharp is a complete .NET library for micro-blogging platforms that allows you to write short and sweet expressions that fly to Twitter, Yammer...UISandbox: UISandbox is a sample C# source code showing how to deal with plugins requiring sandbox, when those plugins must interact with WPF application inte...WinForm SharePoint Web Part Manager: The SharePoint Web Part Manager is a WinForm tool using the SharePoint object model that enables developers and power users to add, update, delete,...WoW Character Viewer: View your World of Warcraft character (or anyone else's character), using this application. Written using Visual Basic Express 2008, then ported t...Xrns2XMod: Xrns2XMod converts from Renoise format (xrns) to mod or xm, which are more compatible formats playable from xmplay or vlc.New ReleasesArkane.FileProperties.DSS: 1.0 stable release: Executables and merge module for 1.0. (See documentation.)Bluetooth Radar: Version 2.0: Add IrDA reference for Bluetooth sending using Obex Add Project icon Add Bluetooth detection mode (Auto close application is there is no blueto...BUtil: BUtil 5.0 Alpha: Backup tasks adding.... in progressChronos WPF: Chronos v1.0 RC 1: Chronos v1.0 RC 1. Development will be feature frozen after this release, only bug fixes will be allowed. Updated nRoute assembly to v0.4 (http:...clipShow: Version 2.5: Release that addresses the canonical syntax issues in search discoverd by Tschachim (thanks again!). Also, the play list and play all menu items s...DarkBook: DarkBook alpha: Hi, here comes the alpha version of Darkbook. It has all the functions already but is still in developing. I hope it's helpful for you, at least it...DirectQ: Release 1.8.3a: Improvements to 1.8.2, which will be shortly be removed. This replaces the original 1.8.3 release from earlier today which had some late-breaking ...Effect Custom Tool for Visual Studio: Effect Custom Tool v1.1: Effect Custom Tool for Visual Studio is a visual studio 2008 extension that helps you generate c# classes from effect (*.fx) files for use with Xna...Folder Bookmarks: Folder Bookmarks 1.4.3: This is the latest version of Folder Bookmarks (1.4.3), with general improvements. It has an installer - it will create a directory 'CPascoe' in My...gpsMe: gpsMe v0.3: Required Hardware Windows Mobile 6 .Net Compact Framework 3.5 integrated gps device VGA or WVGA screen (normally works on others)IST435: Lab 4 - Enterprise Level CMS with DotNetNuke: Lab 4 - Enterprise Level CMS with DotNetNukeThis is the "starter kit" that you must base your Lab 4 on. This lab must be completed in-class.Mouse Jiggler: MouseJiggle-1.1: 1.1 release of Mouse Jiggler, now with x64 compatibility and the ability to start jiggling on run with the --jiggle or -j command-line switch.Mustang Math: MustangMath.exe: This is a quick and dirty "0.1" prototype to demonstrate the speech recognition idea. It starts asking you questions automatically on launch and k...MvcContrib: a Codeplex Foundation project: 2.0.36.0 for MVC2 (RTW): Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcC...Nito.LINQ: Beta (v0.3): New features for this release: Several new supported platforms (see below). PDBs that are source-indexed to the appropriate CodePlex changeset. ...OpenIdPortableArea: 0.1.0.2 OpenIdPortableArea: OpenIdPortableArea.Release: DotNetOpenAuth.dll DotNetOpenAuth.xml MvcContrib.dll MvcContrib.xml OpenIdPortableArea.dll OpenIdPortableAre...PokeIn Comet Ajax Library: PokeIn Sample with Library v0.2: New version of PokeIn library with sample. v0.2 There are new features in this release and no bug detected yet.Project Tru Tiên: Elements-test V1-fix (v2): Là EL test được fix tiếp theo bản fix V1, tạm gọi đây là bản fix V2 của ELtest Trong bản fix này EL được fix thêm vụ Quest, Quest chỉnh sửa đúng t...Rule 18 - Love your clipboard: Rule 18: This is the third public beta for the first version of Rule 18. This version has been updated to support Visual Studio 2010 RTM and .NET 4.0 RTM. ...SevenZipSharp: SevenZipSharp 0.62: Added: Extraction from SFX archives. Now it is possible to unrar RAR self-extractors, unzip ZIP self-extractors, etc. Extraction from DOC, XLS, (...SharePoint Labs: SPLab3001A-FRA-Level200: SPLab3001A-FRA-Level200 This SharePoint Lab will teach the persistence object layer that SharePoint uses to centraly store configuration data and o...TTXPathNavigator: TTXPathNavigator for VS2010: Version for Visual Studio 2010turing machine simulator: SDS: SDS documentVecDraw: VecDraw_0.2.25: Alpha release for test purposesWinForm SharePoint Web Part Manager: Beta 1: First release of the WinForm SharePoitn web part manager toolXrns2XMod: Xrns2XMod 0.5.1: Mod and XM conversion format - No sample data conversion at momentZip Solution: ZipSolution 5.3: Features: 1. Added WaitMsec for visual studio support with getting access to files in post build event; 2. Added ShowTextInToolbars to app.config ...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelpatterns & practices – Enterprise LibraryMost Active ProjectsRawrpatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationFarseer Physics EngineIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBlogEngine.NETjQuery Library for SharePoint Web ServicesDotRasFacebook Developer Toolkit

    Read the article

  • SQLAuthority News Office 2010 Readiness Check Are you ready for Office 2010?

    PowerPivot for Excel is a data analysis tool that delivers unmatched computational power directly within the application users already know and loveMicrosoft Excel. Office 2010 is the next version of Office 2010. We all know Office 2010 is on the verge of getting released and the reviews available online say that its a phenomenal product.My [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How Fusion Middleware Built the Fusion User Experience

    See how you can leverage the entire Fusion Middleware stack to create a compelling user experience, just like Oracle's Applications User Experience team did during the design of Fusion Applications. Learn about key Fusion Middleware components that comprise Oracle's new end-to-end user experience platform in Fusion Applications. Hear about the role of components such as Application Development Framework (ADF), WebCenter, Metadata Services (MDS), Service-Oriented Architecture (SOA), and design patterns.

    Read the article

  • Setting up Visual Studio 2010 to step into Microsoft .NET Source Code

    - by rajbk
    Using the Microsoft Symbol Server to obtain symbol debugging information is now much easier in VS 2010. Microsoft gives you access to their internet symbol server that contains symbol files for most of the .NET framework including the recently announced availability of MVC 2 Symbols.  SETUP In VS 2010 RTM, go to Tools –> Options –> Debugging –> General. Check “Enable .NET Framework source stepping” We get the following dialog box   This automatically disables “Enable My Code”   Go to Debugging –> Symbols and Check “Microsoft Symbol Servers”. You can selectively exclude modules if you want to.   You will get a warning dialog like so: Hitting OK will start the download process   The setup is complete. You are now ready to start debugging! DEBUGGING Add a break point to your application and run the application in debug mode (F5 shortcut for me). Go to your call stack when you hit the break point. Right click on a frame that is grayed out. Select “Load Symbols from” “Microsoft Symbol Servers”. VS will begin a one time download of that assembly. This assembly will be cached locally so you don’t have to wait for the download the next time you debug the app.   We get a one time license agreement dialog box You might see an error like the one below regarding different encoding (hopefully will be fixed).    Assemblies for which the symbols have been loaded are no longer grayed out. Double clicking on any entry in the call stack should now directly take you to the source code for that assembly. AFAIK, not all symbols are available on the MS symbol server. In cases like that you will see a tab like the one below and be given the option to “Show Disassembly”. Enjoy! Newsreel Announcer: Humiliated, Muntz vows a return to Paradise Falls and promises to capture the beast alive! Charles Muntz: [speaking to a large audience outside in the newsreel] I promise to capture the beast alive, and I will not come back until I do!

    Read the article

  • When to favor ASP.NET WebForms over MVC

    - by P.Brian.Mackey
    I know Microsoft has said "ASP.NET MVC is not a replacement for WebForms". Some developers say WebForms is faster to develop than MVC, but I believe this all comes down to comfort level with the technology; so I don't want any answers in this direction. Given that ASP.NET MVC gives a developer more control over our application, why is WebForms not considered obsolete? When should I favor WebForms over MVC for new development?

    Read the article

  • Inside Red Gate - Ricky Leeks

    - by Simon Cooper
    So, one of our profilers has a problem. Red Gate produces two .NET profilers - ANTS Performance Profiler (APP) and ANTS Memory Profiler (AMP). Both products help .NET developers solve problems they are virtually guaranteed to encounter at some point in their careers - slow code, and high memory usage, respectively. Everyone understands slow code - the symptoms are very obvious (an operation takes 2 hours when it should take 10 seconds), you know when you've solved it (the same operation now takes 15 seconds), and everyone understands how you can use a profiler like APP to help solve your particular problem. High memory usage is a much more subtle and misunderstood concept. How can .NET have memory leaks? The garbage collector, and how the CLR uses and frees memory, is one of the most misunderstood concepts in .NET. There's hundreds of blog posts out there covering various aspects of the GC and .NET memory, some of them helpful, some of them confusing, and some of them are just plain wrong. There's a lot of misconceptions out there. And, if you have got an application that uses far too much memory, it can be hard to wade through all the contradictory information available to even get an idea as to what's going on, let alone trying to solve it. That's where a memory profiler, like AMP, comes into play. Unfortunately, that's not the end of the issue. .NET memory management is a large, complicated, and misunderstood problem. Even armed with a profiler, you need to understand what .NET is doing with your objects, how it processes them, and how it frees them, to be able to use the profiler effectively to solve your particular problem. And that's what's wrong with AMP - even with all the thought, designs, UX sessions, and research we've put into AMP itself, some users simply don't have the knowledge required to be able to understand what AMP is telling them about how their application uses memory, and so they have problems understanding & solving their memory problem. Ricky Leeks This is where Ricky Leeks comes in. Created by one of the many...colourful...people in Red Gate, he headlines and promotes several tutorials, pages, and articles all with information on how .NET memory management actually works, with the goal to help educate developers on .NET memory management. And educating us all on how far you can push various vegetable-based puns. This, in turn, not only helps them understand and solve any memory issues they may be having, but helps them proactively code against such memory issues in their existing code. Ricky's latest outing is an interview on .NET Rocks, providing information on the Top 5 .NET Memory Management Gotchas, along with information on a free ebook on .NET Memory Management. Don't worry, there's loads more vegetable-based jokes where those came from...

    Read the article

  • Taking the training wheels off: Accelerating the Business with Oracle IAM by Brian Mozinski (Accenture)

    - by Greg Jensen
    Today, technical requirements for IAM are evolving rapidly, and the bar is continuously raised for high performance IAM solutions as organizations look to roll out high volume use cases on the back of legacy systems.  Existing solutions were often designed and architected to support offline transactions and manual processes, and the business owners today demand globally scalable infrastructure to support the growth their business cases are expected to deliver. To help IAM practitioners address these challenges and make their organizations and themselves more successful, this series we will outline the: • Taking the training wheels off: Accelerating the Business with Oracle IAM The explosive growth in expectations for IAM infrastructure, and the business cases they support to gain investment in new security programs. • "Necessity is the mother of invention": Technical solutions developed in the field Well proven tricks of the trade, used by IAM guru’s to maximize your solution while addressing the requirements of global organizations. • The Art & Science of Performance Tuning of Oracle IAM 11gR2 Real world examples of performance tuning with Oracle IAM • No Where to go but up: Extending the benefits of accelerated IAM Anything is possible, compelling new solutions organizations are unlocking with accelerated Oracle IAM Let’s get started … by talking about the changing dynamics driving these discussions. Big Companies are getting bigger everyday, and increasingly organizations operate across state lines, multiple times zones, and in many countries or continents at the same time.  No longer is midnight to 6am a safe time to take down the system for upgrades, to run recon’s and import or update user accounts and attributes.  Further IT organizations are operating as shared services with SLA’s similar to telephone carrier levels expected by their “clients”.  Workers are moved in and out of roles on a weekly, daily, or even hourly rate and IAM is expected to support those rapid changes.  End users registering for services during business hours in Singapore are expected their access to be green-lighted in custom apps hosted in Portugal within the hour.  Many of the expectations of asynchronous systems and batched updates are not adequate and the number and types of users is growing. When organizations acted more like independent teams at functional or geographic levels it was manageable to have processes that relied on a handful of people who knew how to make things work …. Knew how to get you access to the key systems to get your job done.  Today everyone is expected to do more with less, the finance administrator previously supporting their local Atlanta sales office might now be asked to help close the books for the Johannesburg team, and access certification process once completed monthly by Joan on the 3rd floor is now done by a shared pool of resources in Sao Paulo.   Fragmented processes that rely on institutional knowledge to get access to systems and get work done quickly break down in these scenarios.  Highly robust processes that have automated workflows for connected or disconnected systems give organizations the dynamic flexibility to share work across these lines and cut costs or increase productivity. As the IT industry computing paradigms continue to change with the passing of time, and as mature or proven approaches become clear, it is normal for organizations to adjust accordingly. Businesses must manage identity in an increasingly hybrid world in which legacy on-premises IAM infrastructures are extended or replaced to support more and more interconnected and interdependent services to a wider range of users. The old legacy IAM implementation models we had relied on to manage identities no longer apply. End users expect to self-request access to services from their tablet, get supervisor approval over mobile devices and email, and launch the application even if is hosted on the cloud, or run by a partner, vendor, or service provider. While user expectations are higher, they are also simpler … logging into custom desktop apps to request approvals, or going through email or paper based processes for certification is unacceptable.  Users expect security to operate within the paradigm of the application … i.e. feel like the application they are using. Citizen and customer facing applications have evolved from every where, with custom applications, 3rd party tools, and merging in from acquired entities or 3rd party OEM’s resold to expand your portfolio of services.  These all have their own user stores, authentication models, user lifecycles, session management, etc.  Often the designers/developers are no longer accessible and the documentation is limited.  Bringing together underlying directories to scale for growth, and improve user experience is critical for revenue … but also for operations. Job functions are more dynamic.... take the Olympics for example.  Endless organizations from corporations broadcasting, endorsing, or marketing through the event … to non-profit athletic foundations and public/government entities for athletes and public safety, all operate simultaneously on the world stage.  Each organization needs to spin up short-term teams, often dealing with proprietary information from hot ads to racing strategies or security plans.  IAM is expected to enable team’s to spin up, enable new applications, protect privacy, and secure critical infrastructure.  Then it needs to be disabled just as quickly as users go back to their previous responsibilities. On a more technical level … Optimized system directory; tuning guidelines and parameters are needed by businesses today. Business’s need to be making the right choices (virtual directories) and considerations via choosing the correct architectural patterns (virtual, direct, replicated, and tuning), challenge is that business need to assess and chose the correct architectural patters (centralized, virtualized, and distributed) Today's Business organizations have very complex heterogeneous enterprises that contain diverse and multifaceted information. With today's ever changing global landscape, the strategic end goal in challenging times for business is business agility. The business of identity management requires enterprise's to be more agile and more responsive than ever before. The continued proliferation of networking devices (PC, tablet, PDA's, notebooks, etc.) has caused the number of devices and users to be granted access to these devices to grow exponentially. Business needs to deploy an IAM system that can account for the demands for authentication and authorizations to these devices. Increased innovation is forcing business and organizations to centralize their identity management services. Access management needs to handle traditional web based access as well as handle new innovations around mobile, as well as address insufficient governance processes which can lead to rouge identity accounts, which can then become a source of vulnerabilities within a business’s identity platform. Risk based decisions are providing challenges to business, for an adaptive risk model to make proper access decisions via standard Web single sign on for internal and external customers,. Organizations have to move beyond simple login and passwords to address trusted relationship questions such as: Is this a trusted customer, client, or citizen? Is this a trusted employee, vendor, or partner? Is this a trusted device? Without a solid technological foundation, organizational performance, collaboration, constituent services, or any other organizational processes will languish. A Single server location presents not only network concerns for distributed user base, but identity challenges. The network risks are centered on latency of the long trip that the traffic has to take. Other risks are a performance around availability and if the single identity server is lost, all access is lost. As you can see, there are many reasons why performance tuning IAM will have a substantial impact on the success of your organization.  In our next installment in the series we roll up our sleeves and get into detailed tuning techniques used everyday by thought leaders in the field implementing Oracle Identity & Access Management Solutions.

    Read the article

  • Domain-Driven Design

    Domain-Driven Design is the way to build/design your application when you are focused on the Domain Model, when you do not depend on Infrastructure and when your Developers talk on the same language with Customers.

    Read the article

  • Digital Storage for Airline Entertainment

    - by Bill Evjen
    by Thomas Coughlin Common flash memory cards The most common flash memory products currently in use are SD cards and derivative products (e.g. mini and micro-SD cards) Some compact flash used for professional applications (such as DSLR cameras) Evolution of leading flash formats Standardization –> market expansion Market expansion –> volume iNAND –> focus is on enabling embedded X3 iSSD –> ideal for thin form factor devices Flash memory applications Phones are the #1 user of flash memory Flash memory is used as embedded and removable storage in many mobile applications Flash memory is being used in computers as USB sticks and SSDs Possible use of flash memory in computer combined with HDDs (hybrid HDDs and paired or dual storage computers) It can be a removable card or an embedded card These devices can only handle a specific number of writes Flash memory reads considerably quicker than hard drives Hybrid and dual storage in computers SSDs can provide fast performance but they are expensive HDDs can provide cheap storage but they are relatively slow Combining some flash memory with a HDD can provide costs close to those of HDDs and performance close to flash memory Seagate Momentus XT hybrid HDD Various dual storage offerings putting flash memory with HDDs Other common flash memory devices USB sticks All forms and colors Used for moving files around Some sold with content on them (Sony Movies on USB sticks) Solid State Drives (SSDs) Floating Gate Flash Memory Cell When a bit is programmed, electrons are stored upon the floating gate This has the effect of offsetting the charge on the control gate of the transistor If there is no charge upon the floating gate, then the control gate’s charge determines whether or not a current flows through the channel A strong charge on the control gate assumes that no current flows. A weak charge will allow a strong current to flow through. Similar to HDDs, flash memory must provide: Bit error correction Bad block management NAND and NOR memories are treated differently when it comes to managing wear In many NOR-based systems no management is used at all, since the NOR is simply used to store code, and data is stored in other devices. In this case, it would take a near-infinite amount of time for wear to become an issue since the only time the chip would see an erase/write cycle is when the code in the system is being upgraded, which rarely if ever happens over the life of a typical system. NAND is usually found in very different application than is NOR Flash memory wears out This is expected to get worse over time Retention: Disappearing data Bits fade away Retention decreases with increasing read/writes Bits may change when adjacent bits are read Time and traffic are concerns Controllers typically groom read disturb errors Like DRAM refresh Increases erase/write frequency Application characteristics Music – reads high / writes very low Video – r high / writes very low Internet Cache – r high / writes low On airplanes Many consumers now have their own content viewing devices – do they need the airlines? Is there a way to offer more to consumers, especially with their own viewers Additional special content tie into airplane network access to electrical power, internet Should there be fixed embedded or removable storage for on-board airline entertainment? Is there a way to leverage personal and airline viewers and content in new and entertaining ways?

    Read the article

  • Custom BizTalk, Orchestration SMTP Adapter Dynamic send port

    How to build a BizTalk application that will allow run time configuration and sending of SMTP email from within an orchestration  read moreBy BiZTech KnowDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • SQL SERVER – Sharing your ETL Resources Across Applications with Ease

    - by pinaldave
    Frequently an organization will find that the same resources are used in multiple ETL applications, for example, the same database, general purpose processing logic, or file system locations.  Creating an easy way to reuse these resources across multiple applications would increase efficiency and reduce errors.  Moreover, not every ETL developer has the same skill set, and it is likely that one developer will be more adept at writing code while another is more comfortable configuring database connections.  Real productivity gains will come when these developers are able to work independently while still making their work available to others assigned to the same project.  These are the benefits of a centralized version control system. Of course, most version control systems could be used to store and serve files, but the real need is to store and serve entire ETL applications so that each developer’s ongoing work can immediately benefit from another developer’s completed work.  In other words, the version control system needs to be tightly integrated with the tools used to develop the ETL application. The following screen shot shows such a tool. Desktop ETL tool that tightly integrates with a central version control system Developers can checkout or commit entire projects or just a single artifact.  Each artifact may be managed independently so if you need to go back to an earlier version of one artifact, changes you may have made to other artifacts are not lost.  By being tightly integrated into the graphical environment used to create and edit the project artifacts, it is extremely easy and straight-forward to move your files to and from the version control system and there is no dependency on another vendor’s version control system.  The built in version control system is optimized for managing the artifacts of ETL applications. It is equally important that the version control system supports all of the actions one typically performs such as rollbacks, locking and unlocking of files, and the ability to resolve conflicts.  Note that this particular ETL tool also has the capability to switch back and forth between multiple version control systems. It also needs to be easy to determine the status of an artifact.  Not just that it has been committed or modified, but when and by whom.  Generally you must query the version control system for this information, but having it displayed within the development environment is more desirable. Who’s ETL tool works in this fashion?  Last month I mentioned the data integration solution offered by expressor software.  The version control features I described in this post are all available in their just released expressor 3.1 Standard Edition through the integration of their expressor Studio development environment with a centralized metadata repository and version control system. You can download their Studio application, which is free, or evaluate the full Standard Edition on your own hardware.  It may be worth your time. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • 11gR2 DB 11.2.0.1 Certified with E-Business Suite on Solaris 10 (x86-64)

    - by Steven Chan
    Oracle Database 11g Release 2 version 11.2.0.1 is now certified with Oracle E-Business Suite 11i (11.5.10.2) and Release 12 (12.0.4 or higher, 12.1.1 or higher) on Oracle Solaris on x86-64 (64-bit) running Solaris 10. This announcement includes:Oracle Database 11gR2 version 11.2.0.1 Oracle Database 11gR2 version 11.2.0.1 Real Application Clusters (RAC) Transparent Data Encryption (TDE) Column Encryption with EBS 11i and R12Advanced Security Option (ASO)/Advanced Networking Option (ANO) Export/Import Process for E-Business Suite 11i and R12 Database Instances Transparent Data Encryption (TDE) Tablespace Encryption

    Read the article

  • Oracle Database 11gR2: Installing Grid Infrastructure

    Jim Czuprynski demonstrates how to install and configure a new Oracle Database 11g Release 2 (11gR2) Grid Infrastructure home as the basis for the majority of the grid computing features that were only available in a Real Application Clusters (RAC) clustered database environment in previous releases.

    Read the article

  • Using the Items collection for state management

    - by nikolaosk
    I have explained some of the state mechanisms that we have in our disposal for preserving state in ASP.Net applications in various posts in this blog. You can have a look at this post , this post , this post and this one .My last post was on Application state management and you can read it here . In this post I will show you how to preserve state using the Items collection. Many developers do not know that we have this option as well for state management. With Items state we can pass data between...(read more)

    Read the article

  • Working with Legacy code #4 : Remove the hard dependencies

    - by andrewstopford
    During your refactoring cycle you should be seeking out the hard dependencies that the code may have, examples of these can include. File System Database Network (HTTP) Application Server (Crystal) Classes that service these kind (or code that can be abstracted to a class) of these kind of dependencies should be wrapped in an interface for easier mocking. If you team starts refering to the interface version of these classes the hard dependency will over time work it's self free.

    Read the article

  • 2 Birds, 1 Stone: Enabling M2M and Mobility in Healthcare

    - by Eric Jensen
    Jim Connors has created a video showcase of a comprehensive healthcare solution, connecting a mobile application directly to an embedded patient monitoring system. In the demo, Jim illustrates how you can easily build solutions on top of the Java embedded platform, using Oracle products like Berkeley DB and Database Mobile Server. Jim is running Apache Tomcat on an embedded device, using Berkeley DB as the data store. BDB is transparently linked to an Oracle Database backend using  Database Mobile Server. Information protection is important in healthcare, so it is worth pointing out that these products offer strong data encryption, for storage as well as transit. In his video, Jim does a great job of demystifying M2M. What's compelling about this demo is that uses a solution architecture that enterprise developers are already comfortable and familiar with: a Java apps server with a database backend. The additional pieces used to embed this solution are Oracle Berkeley DB and Database Mobile Server. It functions transparently, from the perspective of Java apps developers. This means that organizations who understand Java apps (basically everyone) can use this technology to develop embedded M2M products. The potential uses for this technology in healthcare alone are immense; any device that measures and records some aspect of the patient could be linked, securely and directly, to the medical records database. Breathing, circulation, other vitals, sensory perception, blood tests, x-rats or CAT scans. The list goes on and on. In this demo case, it's a testament to the power of the Java embedded platform that they are able to easily interface the device, called a Pulse Oximeter, with the web application. If Jim had stopped there, it would've been a cool demo. But he didn't; he actually saved the most awesome part for the end! At 9:52 Jim drops a bombshell: He's also created an Android app, something a doctor would use to view patient health data from his mobile device. The mobile app is seamlessly integrated into the rest of the system, using the device agent from Oracle's Database Mobile Server. In doing so, Jim has really showcased the full power of this solution: the ability to build M2M solutions that integrate seamlessly with mobile applications. In closing, I want to point out that this is not a hypothetical demo using beta or even v1.0 products. Everything in Jim's demo is available today. What's more, every product shown is mature, and already in production at many customer sites, albeit not in the innovative combination Jim has come up with. If your customers are in the market for these type of solutions (and they almost certainly are) I encourage you to download the components and try it out yourself! All the Oracle products showcased in this video are available for evaluation download via Oracle Technology Network.

    Read the article

  • Installing IIS 8 on Windows 8

    - by The Official Microsoft IIS Site
    In case you haven’t heard Windows 8 is now available. As a web developer I think one of the best reasons to upgrade to Windows 8 is that you can start testing IIS 8 right from your PC. This way if you don’t have a budget for a new server you can start to familiarize yourself with some of the new features. IIS 8 has some great new features such as Dynamic IP Restrictions an Application Initialization . However one of the best new features of IIS 8 enables you to throttle the CPU utilization for any...(read more)

    Read the article

  • Code refactoring with Visual Studio 2010 Part-1

    - by Jalpesh P. Vadgama
    Visual studio 2010 is a Great IDE(Integrated Development Environment) and we all are using it in day by day for our coding purpose. There are many great features provided by Visual Studio 2010 and Today I am going to show one of great feature called for code refactoring. This feature is one of the most unappreciated features of Visual Studio 2010 as lots of people still not using that and doing stuff manfully. So to explain feature let’s create a simple console application which will print first name and last name like following. And following is code for that. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Console.WriteLine(string.Format("FirstName:{0}",firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see this is a very basic console application and let’s run it to see output. So now lets explore our first feature called extract method in visual studio you can also do that via refractor menu like following. Just select the code for which you want to extract method and then click refractor menu and then click extract method. Now I am selecting three lines of code and clicking on refactor –> Extract Method just like following. Once you click menu a dialog box will appear like following. As you can I have highlighted two thing first is Method Name where I put Print as Method Name and another one Preview method signature where its smart enough to extract parameter also as We have just selected three lines with  console.writeline.  One you click ok it will extract the method and you code will be like this. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Print(firstName, lastName); } private static void Print(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see in above code its has created a static method called Print and also passed parameter for as firstname and lastname. Isn’t that great!!!. It has also created static print method as I am calling it from static void main.  Hope you liked it.. Stay tuned for more..Till that Happy programming.

    Read the article

  • How to pad number with leading zero with C#

    - by Jalpesh P. Vadgama
    Recently I was working with a project where I was in need to format a number in such a way which can apply leading zero for particular format.  So after doing such R and D I have found a great way to apply this leading zero format. I was having need that I need to pad number in 5 digit format. So following is a table in which format I need my leading zero format. 1-> 00001 20->00020 300->00300 4000->04000 50000->5000 So in the above example you can see that 1 will become 00001 and 20 will become 00200 format so on. So to display an integer value in decimal format I have applied interger.Tostring(String) method where I have passed “Dn” as the value of the format parameter, where n represents the minimum length of the string. So if we pass 5 it will have padding up to 5 digits. So let’s create a simple console application and see how its works. Following is a code for that. using System; namespace LeadingZero { class Program { static void Main(string[] args) { int a = 1; int b = 20; int c = 300; int d = 4000; int e = 50000; Console.WriteLine(string.Format("{0}------>{1}",a,a.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", b, b.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", c, c.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", d, d.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", e, e.ToString("D5"))); Console.ReadKey(); } } } As you can see in the above code I have use string.Format function to display value of integer and after using integer value’s  ToString method. Now Let’s run the console application and following is the output as expected. Here you can see the integer number are converted into the exact output that we requires. That’s it you can see it’s very easy. We have written code in nice clean way and without writing any extra code or loop. Hope you liked it. Stay tuned for more.. Till than happy programming.

    Read the article

  • Architecture strategies for a complex competition scoring system

    - by mikewassmer
    Competition description: There are about 10 teams competing against each other over a 6-week period. Each team's total score (out of a 1000 total available points) is based on the total of its scores in about 25,000 different scoring elements. Most scoring elements are worth a small fraction of a point and there will about 10 X 25,000 = 250,000 total raw input data points. The points for some scoring elements are awarded at frequent regular time intervals during the competition. The points for other scoring elements are awarded at either irregular time intervals or at just one moment in time. There are about 20 different types of scoring elements. Each of the 20 types of scoring elements has a different set of inputs, a different algorithm for calculating the earned score from the raw inputs, and a different number of total available points. The simplest algorithms require one input and one simple calculation. The most complex algorithms consist of hundreds or thousands of raw inputs and a more complicated calculation. Some types of raw inputs are automatically generated. Other types of raw inputs are manually entered. All raw inputs are subject to possible manual retroactive adjustments by competition officials. Primary requirements: The scoring system UI for competitors and other competition followers will show current and historical total team scores, team standings, team scores by scoring element, raw input data (at several levels of aggregation, e.g. daily, weekly, etc.), and other metrics. There will be charts, tables, and other widgets for displaying historical raw data inputs and scores. There will be a quasi-real-time dashboard that will show current scores and raw data inputs. Aggregate scores should be updated/refreshed whenever new raw data inputs arrive or existing raw data inputs are adjusted. There will be a "scorekeeper UI" for manually entering new inputs, manually adjusting existing inputs, and manually adjusting calculated scores. Decisions: Should the scoring calculations be performed on the database layer (T-SQL/SQL Server, in my case) or on the application layer (C#/ASP.NET MVC, in my case)? What are some recommended approaches for calculating updated total team scores whenever new raw inputs arrives? Calculating each of the teams' total scores from scratch every time a new input arrives will probably slow the system to a crawl. I've considered some kind of "diff" approach, but that approach may pose problems for ad-hoc queries and some aggegates. I'm trying draw some sports analogies, but it's tough because most games consist of no more than 20 or 30 scoring elements per game (I'm thinking of a high-scoring baseball game; football and soccer have fewer scoring events per game). Perhaps a financial balance sheet analogy makes more sense because financial "bottom line" calcs may be calculated from 250,000 or more transactions. Should I be making heavy use of caching for this application? Are there any obvious approaches or similar case studies that I may be overlooking?

    Read the article

  • SQL SERVER – Faster SQL Server Databases and Applications – Power and Control with SafePeak Caching Options

    - by Pinal Dave
    Update: This blog post is written based on the SafePeak, which is available for free download. Today, I’d like to examine more closely one of my preferred technologies for accelerating SQL Server databases, SafePeak. Safepeak’s software provides a variety of advanced data caching options, techniques and tools to accelerate the performance and scalability of SQL Server databases and applications. I’d like to look more closely at some of these options, as some of these capabilities could help you address lagging database and performance on your systems. To better understand the available options, it is best to start by understanding the difference between the usual “Basic Caching” vs. SafePeak’s “Dynamic Caching”. Basic Caching Basic Caching (or the stale and static cache) is an ability to put the results from a query into cache for a certain period of time. It is based on TTL, or Time-to-live, and is designed to stay in cache no matter what happens to the data. For example, although the actual data can be modified due to DML commands (update/insert/delete), the cache will still hold the same obsolete query data. Meaning that with the Basic Caching is really static / stale cache.  As you can tell, this approach has its limitations. Dynamic Caching Dynamic Caching (or the non-stale cache) is an ability to put the results from a query into cache while maintaining the cache transaction awareness looking for possible data modifications. The modifications can come as a result of: DML commands (update/insert/delete), indirect modifications due to triggers on other tables, executions of stored procedures with internal DML commands complex cases of stored procedures with multiple levels of internal stored procedures logic. When data modification commands arrive, the caching system identifies the related cache items and evicts them from cache immediately. In the dynamic caching option the TTL setting still exists, although its importance is reduced, since the main factor for cache invalidation (or cache eviction) become the actual data updates commands. Now that we have a basic understanding of the differences between “basic” and “dynamic” caching, let’s dive in deeper. SafePeak: A comprehensive and versatile caching platform SafePeak comes with a wide range of caching options. Some of SafePeak’s caching options are automated, while others require manual configuration. Together they provide a complete solution for IT and Data managers to reach excellent performance acceleration and application scalability for  a wide range of business cases and applications. Automated caching of SQL Queries: Fully/semi-automated caching of all “read” SQL queries, containing any types of data, including Blobs, XMLs, Texts as well as all other standard data types. SafePeak automatically analyzes the incoming queries, categorizes them into SQL Patterns, identifying directly and indirectly accessed tables, views, functions and stored procedures; Automated caching of Stored Procedures: Fully or semi-automated caching of all read” stored procedures, including procedures with complex sub-procedure logic as well as procedures with complex dynamic SQL code. All procedures are analyzed in advance by SafePeak’s  Metadata-Learning process, their SQL schemas are parsed – resulting with a full understanding of the underlying code, objects dependencies (tables, views, functions, sub-procedures) enabling automated or semi-automated (manually review and activate by a mouse-click) cache activation, with full understanding of the transaction logic for cache real-time invalidation; Transaction aware cache: Automated cache awareness for SQL transactions (SQL and in-procs); Dynamic SQL Caching: Procedures with dynamic SQL are pre-parsed, enabling easy cache configuration, eliminating SQL Server load for parsing time and delivering high response time value even in most complicated use-cases; Fully Automated Caching: SQL Patterns (including SQL queries and stored procedures) that are categorized by SafePeak as “read and deterministic” are automatically activated for caching; Semi-Automated Caching: SQL Patterns categorized as “Read and Non deterministic” are patterns of SQL queries and stored procedures that contain reference to non-deterministic functions, like getdate(). Such SQL Patterns are reviewed by the SafePeak administrator and in usually most of them are activated manually for caching (point and click activation); Fully Dynamic Caching: Automated detection of all dependent tables in each SQL Pattern, with automated real-time eviction of the relevant cache items in the event of “write” commands (a DML or a stored procedure) to one of relevant tables. A default setting; Semi Dynamic Caching: A manual cache configuration option enabling reducing the sensitivity of specific SQL Patterns to “write” commands to certain tables/views. An optimization technique relevant for cases when the query data is either known to be static (like archive order details), or when the application sensitivity to fresh data is not critical and can be stale for short period of time (gaining better performance and reduced load); Scheduled Cache Eviction: A manual cache configuration option enabling scheduling SQL Pattern cache eviction based on certain time(s) during a day. A very useful optimization technique when (for example) certain SQL Patterns can be cached but are time sensitive. Example: “select customers that today is their birthday”, an SQL with getdate() function, which can and should be cached, but the data stays relevant only until 00:00 (midnight); Parsing Exceptions Management: Stored procedures that were not fully parsed by SafePeak (due to too complex dynamic SQL or unfamiliar syntax), are signed as “Dynamic Objects” with highest transaction safety settings (such as: Full global cache eviction, DDL Check = lock cache and check for schema changes, and more). The SafePeak solution points the user to the Dynamic Objects that are important for cache effectiveness, provides easy configuration interface, allowing you to improve cache hits and reduce cache global evictions. Usually this is the first configuration in a deployment; Overriding Settings of Stored Procedures: Override the settings of stored procedures (or other object types) for cache optimization. For example, in case a stored procedure SP1 has an “insert” into table T1, it will not be allowed to be cached. However, it is possible that T1 is just a “logging or instrumentation” table left by developers. By overriding the settings a user can allow caching of the problematic stored procedure; Advanced Cache Warm-Up: Creating an XML-based list of queries and stored procedure (with lists of parameters) for periodically automated pre-fetching and caching. An advanced tool allowing you to handle more rare but very performance sensitive queries pre-fetch them into cache allowing high performance for users’ data access; Configuration Driven by Deep SQL Analytics: All SQL queries are continuously logged and analyzed, providing users with deep SQL Analytics and Performance Monitoring. Reduce troubleshooting from days to minutes with database objects and SQL Patterns heat-map. The performance driven configuration helps you to focus on the most important settings that bring you the highest performance gains. Use of SafePeak SQL Analytics allows continuous performance monitoring and analysis, easy identification of bottlenecks of both real-time and historical data; Cloud Ready: Available for instant deployment on Amazon Web Services (AWS). As you can see, there are many options to configure SafePeak’s SQL Server database and application acceleration caching technology to best fit a lot of situations. If you’re not familiar with their technology, they offer free-trial software you can download that comes with a free “help session” to help get you started. You can access the free trial here. Also, SafePeak is available to use on Amazon Cloud. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

< Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >