Search Results

Search found 27232 results on 1090 pages for 'mind mapping software'.

Page 814/1090 | < Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • Implementing the NetBeans Project API on Maven in IntelliJ IDEA

    - by Geertjan
    James McGivern, one of the speakers I met at JAX London, is creating media software on the NetBeans Platform. However, he's using Maven and IntelliJ IDEA and one of the features he needs is project support, i.e., the project infrastructure that's part of NetBeans IDE. The two documents that describe the NetBeans Project API are these: http://platform.netbeans.org/tutorials/nbm-projecttype.html http://netbeans.dzone.com/how-create-maven-nb-project-type By combining the above two, you'll understand how to create a project infrastructure on top of the NetBeans Platform with Maven. However, an additional step of complexity is added when IntelliJ IDEA is included into the mix and therefore I created the following screencast which, in 15 minutes, puts all the pieces together. Be aware that I'm probably not using IntelliJ IDEA and Maven as optimally as I could and I'm publishing this at least partly so that the errors of my ways can be pointed out to me. But, first and foremost, this is especially for you James:  Note: Intentionally no sound, only callouts explaining what I'm doing. You'll probably need to pause the movie here and there to absorb the text; for details on the text, see the two links referred to above.

    Read the article

  • Remote Control Home PC from Corporate Work PC

    - by muncherelli
    Here is my situation: I am currently on a Windows XP workstation at work. I have an android tablet that I use to splashtop into my home PC. I would like to be able to use my work keyboard and mouse to control my home PC while I am splashtop'd into it using my tablet. My work PC is on a corporate LAN, and not on the same network as my tablet. The company I work for provides wifi for personal devices, but they are not accessable to the internal network. I thought about going the Synergy route, however that would require my home PC to be able to connect to my work PC which isn't really possible. The opposite would work though, if I could reverse connect the server to the client, but the Synergy software doesn't really support that. I do have a couple linux boxes running at home, so I can ssh into my home network and tunnel ports via SSH if needed. With what I have, how can I accomplish seamless keyboard and mouse sharing between my work PC and either my home PC or my android tablet?

    Read the article

  • when I type apt-get -f install, I get the error message

    - by gene
    xserver-xorg-core (2:1.11.4-0ubuntu10.8) breaks xserver-xorg-video-5 and is installed. Also I can not upgrade my software, It said that the package system is broken, with detail information: The following packages have unmet dependencies: xserver-xorg-core: Depends: xserver-common (>= 2:1.11.4-0ubuntu10.8) but 2:1.11.4-0ubuntu10.8 is installed when I issue sudo apt-get update, the output seems fine the source is(sorry the output has too many links that I can not post in);http://archive.ubuntu.com Reading package lists... Done ====================== when I issue sudo apt-get dist-upgrade, the output is: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: xserver-xorg-core : Breaks: xserver-xorg-video-5 E: Unmet dependencies. Try using -f. ================== when I issue 'sudo apt-get -f install', the output is: dpkg: dependency problems prevent configuration of xserver-xorg-video-radeon: xserver-xorg-core (2:1.11.4-0ubuntu10.8) breaks xserver-xorg-video-5 and is installed. xserver-xorg-video-radeon (1:6.12.1-0ubuntu2) provides xserver-xorg-video-5. dpkg: error processing xserver-xorg-video-radeon (--configure):dependency problems leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: xserver-xorg-video-radeon E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • How to view/mount other partitions on your hard drive

    - by Preston Zacharias
    Recently I have installed Ubuntu 12.04 Beta 2 on a USB flash drive and decided to install it on an old external HDD which I have taken out of the casing and succesfully mounted in my desktop computer. There is no other operating system besides the newly install Ubuntu. However, there is about 500gb of data on the drive. This is why i used a partitioning software on my windows 7 netbook to partition the hard drive to set aside 1tb for files, 350gb of space for linux and the remaining 650gb for Vista which i plan on installing soon. But this is where the problem sets in...when installing Ubuntu it does not recognize that the drive is partitioned at all, it's just one big open block of space...so I used the installers built in partitioning feature to set aside 300gb for main Ubuntu install and 50gb for swap space. I set both of these partitions to be created at the "end" so that it wouldn't delete or write over my data. And this is where i am really lost; when booting into Ubuntu i am able to use it perfectly fine, got on internet, etc...but i have NO CLUE as to how i can view files that were previously on the drive (all of my data that i had prior to install). How can I mount/be able to view the other partition so that i can have access to my data? Thank you ahead of time! I REALLY appreciate any help or advice! ~Preston

    Read the article

  • Disable mouse hotkeys in Chrome

    - by John Ruiz
    Does anyone know how I can get Chrome to stop using my mouse buttons as hotkeys for a Logitech MX518 gaming mouse? I have the mouse driver and software suite (SetPoint) installed. Unfortunately, SetPoint does not provide per-application settings, so that route is not an option. No matter what I do in SetPoint, Chrome captures my side mouse buttons and uses them as a forward/back hotkey. I want to turn this off because I use those buttons for my push-to-talk in Mumble/Ventrilo. Any idea how I can do this? edit: my set-point does not have a way to create per-application settings.

    Read the article

  • What is a Coding Dojo?

    - by huwyss
    Recently i found out that there is a thing called "coding dojo". The point behind it is that software developers want to have a space to learn new stuff like processes, methods, coding details, languages, and whatnot in an environment without stress. Just for fun. No competition. No results required. No deadlines.Some days ago I joined the Zurich coding dojo. We were three programmers with different backgrounds.We gave ourselves the task to develop a method that takes an input value and returns its prime factors. We did pair programming and every few minutes we switched positions. We used test driven development. The chosen programming language was Ruby.I haven't really done TDD before. It was pretty interesting to see the algorithm develop following the testcases.We started with the first test input=1 then developed the most simple productive program that passed this very first test. Then we added the next test input=2 and implemented the productive code. We kept adding tests and made sure all tests are passed until we had the general solution.When we improved the performance of our code we saw the value of the tests we wrote before. Of course our first performance improvement broke several tests.It was a very interesting experience to see how other developers think and how they work. I will participate at the dojo again and can warmly recommend it to anyone. There are  coding dojos all over the world.Have fun!

    Read the article

  • International Dvorak keyboard doesn't trigger hot-keys

    - by akurtser
    I'm using the Engilsh-Dvorak keyboard-layout; My second keyboard language is Hebrew, which has nothing to do with Dvorak but the hot keys (e.g if I'm writing a document in Hebrew and want to make some bold text using Ctrl+b). The default Hebrew keyboard that comes with Windows (7 and below) has a shift mode which matches each Hebrew character with its matching English QWERTY character ). Obviously I'd want to use the Dvorak corresponding key rather than the QWERTY one, so I created a Hebrew-Dvorak keyboard with a software called Keyboard Layout Manager (KLM) which creates new keyboard layouts DLLs. It works just fine for the shift key, however, Ctrl-key triggered hot-keys (e.g Ctrl+l in FF) are being matched to the corresponding QWERTY key. I've examined the properly working English-Dvorak layout using KLM and in it's "Ctrl+ pressed" view, there isn't any character that's matched to any key but still I tried to encode the Hebrew Ctrl+ pressed keys to work with their matching Dvorak keys, yet it had no effect.

    Read the article

  • File corruption when copying different file on raid 1

    - by Stephan
    I have a RAID 1 configuration of 2 1TB drives on a Fedora 12 box. Most of what is stored there are video files that are numerical labeled. The problem I'm having is that I had one of the video files get corrupted. I copied a replacement from a backup and replaced the bad file and now it works fine. However, after doing this the next numbered file goes from 350MB to 200KB and all but about .5 second of video disappears. If I then replace that file it happens to the next one down the line. Ex: Replace corrupt file 1.avi and file 2.avi shrinks to 200KB. Replace now corrupted 2.avi and it works but 3.avi gets screwed up. I have run SMART tests on the drives and they report fine. Does anyone have any tests I can run to try to figure out what is going on? EDIT: It is a two disk software RAID 1 with an ext4 filesystem

    Read the article

  • Get Fanatical About Your Followers

    - by Mike Stiles
    In the fourth of our series of discussions with Aberdeen’s Trip Kucera, we touch on what fans of your brand have come to expect in exchange for their fandom. Spotlight: Around the Oracle Social office, we live for football. So when we think of a true “fan” of a brand, something on the level of a football fan is what comes to mind. But are brands trying to invest fans on that same level? Trip: Yeah, if you’re a football fan, this is definitely your time of year. And if you’ve been to any NFL games recently, especially if you hadn’t been for a few years previously, you may have noticed that from the cup holders to in-stadium Wi-Fi, there’s an increasing emphasis being placed on “fan-focused” accommodations. That’s what they’re known as in the stadium business. Spotlight: How are brands doing in that fan-focused arena? Trip: Remember fan is short for “fanatical.” Brands can definitely learn from the way teams have become fanatical about their fans, or in the social media world, their followers. Many companies consider a segment of their addressable social audience as true fans; I’ve even heard the term “super-fans” used. So just as fans know and can tell you nearly everything about their favorite team, our research shows that there’s a lot value from getting to know your social audience—your followers—at a deeper level. Spotlight: So did your research show there’s a lot to be gained by making fandom a two-way street? Trip: Aberdeen’s new social relationship management research suggests that companies should develop capabilities to better analyze their social audience at a more granular level. Countless “ripped from the headlines” examples, from “United Breaks Guitars” to the most recent British Airways social fiasco we talked about a few weeks ago show how social can magnify the impact of a single customer voice. Spotlight: So how do the companies who are executing social most successfully do that? Trip: Leaders, which are the top-performing companies in Aberdeen’s study, are showing the value of identifying and categorizing your social audience. You should certainly treat every customer as if they have 10,000 followers, because they just might, but you can also proactively engage with high-value customer and high-value influencers. Getting back to the football analogy, it’s like how teams strive to give every guest a great experience, but they really roll out the red carpet for those season ticket and luxury box holders. Spotlight: I’m not allowed in luxury boxes, so you’ll have to tell me what that’s like. But what is the brand equivalent of rolling out the red carpet? Trip: Leaders are nearly three times more likely than Followers to have a process in place that identifies key social influencers for engagement, and more than twice as likely to identify customer advocates for social outreach. This is the kind of knowledge that gives companies the ability to better target social messaging and promotions like we talked about in our last discussion, as well as a basis for understanding how to measure the impact of their social media programs. I’ll give you an example. I hosted an event at one of my favorite restaurants recently. I had mentioned them in a Tweet several weeks before the event, and on the day of the event, they Tweeted out that they were looking forward to seeing me that evening for the event. It’s a small thing, but it had a big impact and I’d certainly go back as a result. Spotlight: So what specifically can brands use and look at to determine where their potential super-fans are? Trip: Social graph analysis, which looks at both the demographic/psychographic trends as well as the behavioral connections, can surface important brand value. Aberdeen’s PR and Brand Management research indicated that top-performing companies are more than three times more likely than Followers to both determine demographic trends through social listening (44% vs. 13%), and to identify meaningful customer segments through social (44% vs. 12%). This kind of brand-level insight can complement and enrich traditional market research. But perhaps even more importantly, it can serve as an early warning system for customer experience failures. @mikestilesPhoto: freedigitalphotos.net

    Read the article

  • help building a PC that can image a dozen hard drives simultaneously

    - by Bigbio2002
    Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

    Read the article

  • Low Graphics and laggy screen after update to 13.10 from 13.04

    - by Wh0RU
    After updating from 13.04 to 13.10 many of 3D unity stuff has stopped working, I am suing Samsung Series 3 (NP350V5X) Laptop which has Switchable Intel and AMD Radeon HD 7670M GFX. xserver-xorg-video-ati does works but NO 3D support and graphics are very low. [I am currently using this] fglrx & fglrx-updates shows blank screen after Login. Intel Graphic Install doesn't work either (dependency error) Output of $ sudo lshw -c video *-display description: VGA compatible controller product: Thames [Radeon HD 7500M/7600M Series] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:45 memory:e0000000-efffffff memory:c0120000-c013ffff ioport:3000(size=256) memory:c0100000-c011ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:bfc00000-bfffffff memory:d0000000-dfffffff ioport:4000(size=64) Similarly $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) OpenGL version string: 2.1 Mesa 9.2.1 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Shows no 3D support. Can anyone please guide how to make things working again.

    Read the article

  • How to handle fine grained field-based ACL permissions in a RESTful service?

    - by Jason McClellan
    I've been trying to design a RESTful API and have had most of my questions answered, but there is one aspect of permissions that I'm struggling with. Different roles may have different permissions and different representations of a resource. For example, an Admin or the user himself may see more fields in his own User representation vs another less-privileged user. This is achieved simply by changing the representation on the backend, ie: deciding whether or not to include those fields. Additionally, some actions may be taken on a resource by some users and not by others. This is achieved by deciding whether or not to include those action items as links, eg: edit and delete links. A user who does not have edit permissions will not have an edit link. That covers nearly all of my permission use cases, but there is one that I've not quite figured out. There are some scenarios whereby for a given representation of an object, all fields are visible for two or more roles, but only a subset of those roles my edit certain fields. An example: { "person": { "id": 1, "name": "Bob", "age": 25, "occupation": "software developer", "phone": "555-555-5555", "description": "Could use some sunlight.." } } Given 3 users: an Admin, a regular User, and Bob himself (also a regular User), I need to be able to convey to the front end that: Admins may edit all fields, Bob himself may edit all fields, but a regular User, while they can view all fields, can only edit the description field. I certainly don't want the client to have to make the determination (or even, for that matter, to have any notion of the roles involved) but I do need a way for the backend to convey to the client which fields are editable. I can't simply use a combination of representation (the fields returned for viewing) and links (whether or not an edit link is availble) in this scenario since it's more finely grained. Has anyone solved this elegantly without adding the logic directly to the client?

    Read the article

  • Excluding certain file types in wget

    - by Alan Spark
    I have been using wget for a while now to mirror files from an ftp server to a local folder. My wget command is as follows: wget -mirror -w 1 -p -nH -P /var/www/ ftp://my-ftp-server However, I just noticed that it is copying over a .listing file for every folder that it visits. So, even if nothing has been changed on the ftp server, a .listing file will always be copied. My understanding is that the .listing file is created when wget opens the ftp session. Is there a way to avoid this? I've tried the -R option (e.g. -R .listing) but this didn't help. See: http://www.gnu.org/software/wget/manual/wget.html#Recursive-Accept_002fReject-Options Thanks, Alan

    Read the article

  • What is wrong with my expect script?

    - by Bryan
    I'm trying to learn how to use the expect command, to help me automate deployment of some software via shell scripts, and figured I start with something simple to get me started. I've created a file in my home dir called 'foo' using: touch foo And I've created the following script saved as test.exp #!/usr/bin/expect spawn rm -i foo expect "rm: remove regular empty file `foo'?" send "y\r" When I run the script using ./test.exp, it spawns the rm command, but it doesn't appear to send the Y and carriage return. I know I don't have a typo in the expect string, as I've used copy and paste to put in the script. What am I doing wrong?

    Read the article

  • Does reformatting the drive really removes spywares and viruses

    - by user23950
    I've recently read that the data that you deleted in windows using shift+del doesn't actually get deleted it is just made to be overwritable by other data that will soon be stored in your hard drive. And just marked as deleted. And there are some articles like this: http://www.howtogeek.com/howto/15037/use-an-ubuntu-live-cd-to-securely-wipe-your-pcs-hard-drive/ that shows how to completely wipe out the hard drive of all the data. And thus the data can't be recovered even by the most advanced software for recovering deleted data. Now my question is, does spyware, virus or other harmful really are lost forever if you reformat your drive?

    Read the article

  • Upgrading from MySQL Server to MariaDB

    - by Korrupzion
    I've heard that MariaDB has better performance than MySQL-Server. I'm running software that makes an intensive use of MySQL, thats why I want to try upgrading to MariaDB. Please tell me your experiences doing this conversion, and instructions or tips. Also, which files I should take care of for making a backup of MySQL-Server, so if something goes wrong with MariaDB, I could rollback to MySQL without issues? I would use this but i'm not sure if it's enough to get a full backup of MySQL-Server confs and databases mysqldump --all-databases backup /etc/mysql My Environment: uname -a (Debian Lenny) Linux charizard 2.6.26-2-amd64 #1 SMP Thu Sep 16 15:56:38 UTC 2010 x86_64 GNU/Linux MySQL Server Version: Server version 5.0.51a-24+lenny4 MySQL Client: 5.0.51a Statistics: Threads: 25 Questions: 14690861 Slow queries: 9 Opens: 21428 Flush tables: 1 Open tables: 128 Queries per second avg: 162.666 Uptime: 1 day 1 hour 5 min 13 sec Thanks! PS: Rate my english :D

    Read the article

  • IT Inventory Tracking

    - by DrStalker
    What is a good tool to keep track of IT inventory? Systems that are installed and running, parts being ordered, that sort of thing. I'd love a central, web based system (preferably something we can customize) but my searching so far has resulted in a lot of dead open source projects that havn't been updated in a few years and poorly created commercial websites that don't do a very good job describing their product. The software doesn't have to be free or open source - a good commercial alternative is fine. It doesn't even need to be a web-based tool, that's just what I thought would be simplist to find and easiest to deploy. The number of assets that it will be tracking will be in the dozens, so it doesn't have to be a super high-end enterprise solution but it does need to do a better job than an excel sheet in a shared folder (which is our current "solution")

    Read the article

  • Arrow ECS Oracle OpenWorld update

    - by mseika
    A date to mark in your diaries now! On Tuesday 23rd October will be holding our post Oracle OpenWorld Oracle. Covering all the important announcements from Oracle OpenWorld, this must attend event will be held in the Royal Exchange, London. The full agenda and speaker line up is being finalised but we will cover all the major strategy and product announcements from Oracle OpenWorld, FY 13 Channel Strategy and Partnering with Arrow ECS. Oracle OpenWorld a Channel Perspective, David Tweddle - Head of UK Alliance and Channel Hardware Announcements, Christopher Lindsay - Oracle Hardware EMEA Software Announcements, speaker to be confirmed Arrow ECS Focus and Strategy, Simon Rushbrook - Business Development Manager, Arrow ECS Summary and close, Nick Tinsley - Sales Director Who should attend? The event is subject Oracle NDA and is aimed at sales and pre-sales personal within your organisation. This event will commence at 12.30 with lunch, presentations will start at 1.30 and will close at 4.30 followed by drinks and networking. Full details to follow shortly but save the date and register now. Date & Time Tuesday 23rd October 201212.30pm - 4.30pm Post event drinks will be servedfrom 4.30pm Location London OfficeEntrance 2, Fourth Floor,The Royal Exchange,London, EC3V 3LN Click here for directions >

    Read the article

  • Help, I need to debug my BrowserHelperObject (BHO) (in C++) after a internet explorer 8 crash in Rel

    - by BHOdevelopper
    Hi, here is the situation, i'm developping a Browser Helper Object (BHO) in C++ with Visual Studio 2008, and i learned that the memory wasn't managed the same way in Debug mode than in Release mode. So when i run my BHO in debug mode, internet explorer 8 works just fine and i got no erros at all, the browser stays alive forever, but as soon as i compile it in release mode, i got no errors, no message, nothing, but after 5 minutes i can see through the task manager that internet explorer instances are just eating memory and then the browser just stop responding every time. Please, I really need some hint on how to get a feedback on what could be the error. I heard that, often it was happening because of memory mismanagement. I need a software that just grab a memory dump or something when iexplorer crashes to help me find the problem. Any help is appreciated, I'll be looking for responses every single days, thank you.

    Read the article

  • How do I stop color changes when quitting vi from a terminal emulator?

    - by Michael Warhol
    I have a problem with colors when using vi under Ubuntu 12.04. I'm connecting to my Ubuntu server from a PC, using PowerTerm terminal emulation software. I have PowerTerm set up to display black text on a grey background. When I connect to the Ubuntu box, the screen is fine. When I open a file with vi, the screen is fine. The text is black on a gray background, which is normal for my PowerTerm setup. However, if the file is less than a full screen long, the remainder of the screen is a black background. When I quit vi, the entire background turns black, and the text becomes white. I have to do a Terminal Reset to restore my normal text and background colors. What I want is for there to be no change at all when I use vi. The text should be black and the background grey. I have another server loaded with RedHat 9, and that acts normally; colors don’t change when using vi. Here is my .vimrc file: set compatible syntax off let g:loaded_matchparen=1 set nocp set noincsearch set nohlsearch set noshowmatch set bg=dark I've tried set bg=dark and set bg=light. It makes no difference. Is there some other set command that would clear this up for me, or some TERM setting (my TERM is set to linux)?

    Read the article

  • Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

    - by BLAU
    My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

    Read the article

  • How can I remove the DRM from books I have purchased for my Kindle? [closed]

    - by Jeremy Banks
    How can I the remove DRM from books I have purchased for my Kindle? A solution that works on Mac OS X and/or Linux would be ideal, but a Windows-only solution is also acceptable. Moral aside: I do not plan to share or pirate books; I am very happy with the Amazon Kindle store and have purchased more books from there since getting my Kindle a month ago than I had in the previous two years. However, I do not feel comfortable keeping them in an encrypted format that only a single company's software will allow me to access. I may also want to convert them into a format for other readers in the future, which is not possible without first removing the DRM.

    Read the article

  • Have an iPad's viewable area visible on your computer monitor for remote web-meeting training?

    - by MikeN
    I want to demo the usage of my iPad on my computer screen so that I can transmit it to other people during a training session using a web conference tool (like dimdim.com, gotomeeting.com, fuzemeeting.com, etc...) Is there a way to stream an iPad's display to a computer so it would be visible in such a screen casting software? My current ad-hoc solution for this would be to use a webcam to livecast me using a physical (real life) iPad and broadcast that to other users for training. This is undesirable due to the difficulty in really seeing the iPad well. So I'm hoping someone has a way to do: 1) Video output the iPad's display to my computer screen. 2) Emulate an iPad with a installed app (not having the source code) on the screen.

    Read the article

  • Netgear VPN can't access specific server

    - by Critologist
    I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

    Read the article

< Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >