Search Results

Search found 4320 results on 173 pages for 'vertex arrays'.

Page 95/173 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Proving that the distance values extracted in Dijkstra's algorithm is non-decreasing?

    - by Gail
    I'm reviewing my old algorithms notes and have come across this proof. It was from an assignment I had and I got it correct, but I feel that the proof certainly lacks. The question is to prove that the distance values taken from the priority queue in Dijkstra's algorithm is a non-decreasing sequence. My proof goes as follows: Proof by contradiction. Fist, assume that we pull a vertex from Q with d-value 'i'. Next time, we pull a vertex with d-value 'j'. When we pulled i, we have finalised our d-value and computed the shortest-path from the start vertex, s, to i. Since we have positive edge weights, it is impossible for our d-values to shrink as we add vertices to our path. If after pulling i from Q, we pull j with a smaller d-value, we may not have a shortest path to i, since we may be able to reach i through j. However, we have already computed the shortest path to i. We did not check a possible path. We no longer have a guaranteed path. Contradiction.

    Read the article

  • Suggestions of the easiest algorithms for some Graph operations

    - by Nazgulled
    Hi, The deadline for this project is closing in very quickly and I don't have much time to deal with what it's left. So, instead of looking for the best (and probably more complicated/time consuming) algorithms, I'm looking for the easiest algorithms to implement a few operations on a Graph structure. The operations I'll need to do is as follows: List all users in the graph network given a distance X List all users in the graph network given a distance X and the type of relation Calculate the shortest path between 2 users on the graph network given a type of relation Calculate the maximum distance between 2 users on the graph network Calculate the most distant connected users on the graph network A few notes about my Graph implementation: The edge node has 2 properties, one is of type char and another int. They represent the type of relation and weight, respectively. The Graph is implemented with linked lists, for both the vertices and edges. I mean, each vertex points to the next one and each vertex also points to the head of a different linked list, the edges for that specific vertex. What I know about what I need to do: I don't know if this is the easiest as I said above, but for the shortest path between 2 users, I believe the Dijkstra algorithm is what people seem to recommend pretty often so I think I'm going with that. I've been searching and searching and I'm finding it hard to implement this algorithm, does anyone know of any tutorial or something easy to understand so I can implement this algorithm myself? If possible, with C source code examples, it would help a lot. I see many examples with math notations but that just confuses me even more. Do you think it would help if I "converted" the graph to an adjacency matrix to represent the links weight and relation type? Would it be easier to perform the algorithm on that instead of the linked lists? I could easily implement a function to do that conversion when needed. I'm saying this because I got the feeling it would be easier after reading a couple of pages about the subject, but I could be wrong. I don't have any ideas about the other 4 operations, suggestions?

    Read the article

  • addObjectsFromArray

    - by derek.lo
    I have a question about memory management when using the addObjectsFromArray method. Basically, I have 2 arrays defined in the appDelegate. I need these 2 arrays for the duration of my application's runtime. I therefore release them in my appDelegate's dealloc method. When I go to use these two arrays in a class, I want one array to store the values from the other, so that the other can have it's contents removed, but still stick around for use. Something like this: [appDelegate.arrayTwo addObjectsFromArray:appDelegate.arrayOne]; [appDelegate.arrayOne removeAllObjects]; I'm getting the compiler error: EXC_BAD_ACCESS because of a pointer issue? retaining issue? Any help would be greatly appreciated! Thanks

    Read the article

  • Array of pointers in Objective-C using NSArray

    - by Amir
    Hello, I am writting program for my iphone and have a qestion. lets say i have class named my_obj class my_obj { NSString *name; NSinteger *id; NSinteger *foo; NSString *boo; } now i allocate 100 objects from type my_obj and insert them to array from type NSArray. then i want to sort the Array in two different ways. one by the name and the second by the id. i want to allocate another two arrays from type NSArray *arraySortByName *arraySortById what i need to do if i just want the sorted arrays to be referenced to the original array so i will get two sorted arrays that point to the original array (that didnt changed!) i other word i dont want to allocate another 100 objects to each sorted array.

    Read the article

  • Looping through with double variables

    - by Luke
    I have two arrays with two sets of values in ($a[] and $b[]) I want to do something like the following: $a[0] - $b[0] $a[0] - $b[1] $a[1] - $b[0] $a[1] - $b[1] This will continue until the arrays reach the end. So i want a hyphen to seperate the two arrays, with the first array staying the same until the second array has looped through. I am trying to get this in a dropdown with option value. How could i achieve this? I never tried doing any loops with two varaibles like that before, I literally have no idea at all! Thankyou

    Read the article

  • Anyone Know a Great Sparse One Dimensional Array Library in Python?

    - by TheJacobTaylor
    I am working on an algorithm in Python that uses arrays heavily. The arrays are typically sparse and are read from and written to constantly. I am currently using relatively large native arrays and the performance is good but the memory usage is high (as expected). I would like to be able to have the array implementation not waste space for values that are not used and allow an index offset other than zero. As an example, if my numbers start at 1,000,000 I would like to be able to index my array starting at 1,000,000 and not be required to waste memory with a million unused values. Array reads and writes needs to be fast. Expanding into new territory can be a small delay but reads and writes should be O(1) if possible. Does anybody know of a library that can do it? Thanks!

    Read the article

  • Simple explaination of Arraylists

    - by Jeremy
    I'm new to programming and I'm looking for a simple answer to build my foundation of understanding Arrays. I've used google and searched this site. After a bit of trial and error I get how to make and reference Arrays like thing[3] gets you the fourth thing in the thing array(since 0 is the first). which lets me do something like thing[3].getStupidNumber() to get the StupidNumber of the 4th thing in the thing array. Then I get to ArrayLists which seem to have much more utility but I cant make logical sense of them like Arrays. When i search I cant find this or word this correctly and thus far everything else I've learned clicked easily. so say I make an ArrayList thing with 5 things in it. how do i get to the .getStupidNumber() method inside the fourth thing, if possible? I think if I learn this I can learn the rest on my own. Thanks!

    Read the article

  • How to code an efficient blacklist filter function in php?

    - by achairapart
    So, I have three arrays like this: [items] => Array ( [0] => Array ( [id] => someid [title] => sometitle [author] => someauthor ... ) ... ) and also a string with comma separated words to blacklist: $blacklist = "some,words,to,blacklist"; Now I need to match these words with (as they can be one of) id, title, author and show results accordingly. I was thinking of a function like this: $pattern = '('.strtr($blacklist, ",", "|").')'; // should return (some|words|etc) foreach ($items as $item) { if ( !preg_match($pattern,$item['id']) || !preg_match($pattern,$item['title']) || !preg_match($pattern,$item['author']) ) { // show item } } and I wonder if this is the most efficient way to filter the arrays or I should use something with strpos() or filter_var with FILTER_VALIDATE_REGEXP ... Note that this function is repeated per 3 arrays. However, each array will not contain more than 50 items.

    Read the article

  • Java: Inputting text from a file using split

    - by 00PS
    I am inputting an adjacency list for a graph. There are three columns of data (vertex, destination, edge) separated by a single space. Here is my implementation so far: FileStream in = new FileStream("input1.txt"); Scanner s = new Scanner(in); String buffer; String [] line = null; while (s.hasNext()) { buffer = s.nextLine(); line = buffer.split("\\s+"); g.add(line[0]); System.out.println("Added vertex " + line[0] + "."); g.addEdge(line[0], line[1], Integer.parseInt(line[2])); System.out.println("Added edge from " + line[0] + " to " + line[1] + " with a weight of " + Integer.parseInt(line[2]) + "."); } System.out.println("Size of graph = " + g.size()); Here is the output: Added vertex a. Added edge from a to b with a weight of 9. Exception in thread "main" java.lang.NullPointerException at structure5.GraphListDirected.addEdge(GraphListDirected.java:93) at Driver.main(Driver.java:28) I was under the impression that line = buffer.split("\\s+"); would return a 2 dimensional array of Strings to the variable line. It seemed to work the first time but not the second. Any thoughts? I would also like some feedback on my implementation of this problem. Is there a better way? Anything to help out a novice! :)

    Read the article

  • Arry of pointers in objective c using NSArray

    - by Amir
    Hello, I am writting program for my iphone and have a qestion. lets say i have class named my_obj class my_obj { NSString *name; NSinteger *id; NSinteger *foo; NSString *boo; } now i allocate 100 objects from type my_obj and insert them to array from type NSArray. then i want to sort the Array in two different ways. one by the name and the second by the id. i want to allocate another two arrays from type NSArray *arraySortByName *arraySortById what i need to do if i just want the sorted arrays to be referenced to the original array so i will get two sorted arrays that point to the original array (that didnt changed!) i other word i dont want to allocate another 100 objects to each sorted array.

    Read the article

  • Cloning ID3DXMesh with declration that has 12 floats breaks?

    - by meds
    I have the following vertex declration: struct MESHVERTInstanced { float x, y, z; // Position float nx, ny, nz; // Normal float tu, tv; // Texcoord float idx; // index of the vertex! float tanx, tany, tanz; // The tangent const static D3DVERTEXELEMENT9 Decl[6]; static IDirect3DVertexDeclaration9* meshvertinstdecl; }; And I declare it as such: const D3DVERTEXELEMENT9 MESHVERTInstanced::Decl[] = { { 0, 0, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_POSITION, 0 }, { 0, 12, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_NORMAL, 0 }, { 0, 24, D3DDECLTYPE_FLOAT2, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_TEXCOORD, 0 }, { 0, 32, D3DDECLTYPE_FLOAT1, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_TEXCOORD, 1 }, { 0, 36, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_TANGENT, 0 }, D3DDECL_END() }; What I try to do next is copy an ID3DXMesh into another one with the new vertex declaration as such: model->CloneMesh( model->GetOptions(), MESHVERTInstanced::Decl, gd3dDevice, &pTempMesh ); When I try to get the FVF size of pTempMesh (D3DXGetFVFVertexSize(pTempMesh-GetFVF())) I get '0' though the size should be 48. The whole thing is fine if I don't have the last declaration, '{ 0, 36, D3DDECLTYPE_FLOAT3, D3DDECLMETHOD_DEFAULT, D3DDECLUSAGE_TANGENT, 0 },' in it and the CloneMesh function does not return a FAIL. I've also tried using different declarations such as D3DDECLUSAGE_TEXCOORD and that has worked fine, returning a size of 48. Is there something specific about D3DDECLUSAGE_TANGENT I don't know? I'm at a complete loss as to why this isn't working...

    Read the article

  • MemoryError when running Numpy Meshgrid

    - by joaoc
    I have 8823 data points with x,y coordinates. I'm trying to follow the answer on how to get a scatter dataset to be represented as a heatmap but when I go through the X, Y = np.meshgrid(x, y) instruction with my data arrays I get MemoryError. I am new to numpy and matplotlib and am essentially trying to run this by adapting the examples I can find. Here's how I built my arrays from a file that has them stored: XY_File = open ('XY_Output.txt', 'r') XY = XY_File.readlines() XY_File.close() Xf=[] Yf=[] for line in XY: Xf.append(float(line.split('\t')[0])) Yf.append(float(line.split('\t')[1])) x=array(Xf) y=array(Yf) Is there a problem with my arrays? This same code worked when put into this example but I'm not too sure. Why am I getting this MemoryError and how can I fix this?

    Read the article

  • own drawImage / drawLine in OpenGL

    - by Chrise
    I'm implementing some native 2D-draw functions in my graphics engine for android, but now there's another question coming up, when I observe the performance of my program. At the moment I'm implementing a drawLine/drawImage function. In summary, there are following different values for drawing each different line / image: the color the alpha value the width of the line rotation (only for images) size/scale (also for images) blending method (subrtract, add, normal-alpha) Now, when an imageLine is drawn, I put the CPU-calculated vertex-positions and uv-values for 6 vertices (2 triangles), into a Floatbuffer and draw it immediately with drawArrays, after passing information for drawing (color,alpha, etc.) via uniforms to the shader. When I draw an image, the pre-set VBO is directly drawn after passing information. The first fact I recognized, is: of course drawing Images is much faster, than imagelines (beacuse of VBOs), but also: I cannot pre-put vertex-data into a VBO for imageLines, because imageLines have no static shape like normal images (varying linelength, varying linewidth and the vertex positions of x1,y1 and x2,y2 change too often) That's why I use a normal Floatbuffer, instead of a VBO. So my question is: What's the best way for managing images, and other 2D-graphics functions. For me it's some kind of important, that the user of the engine is able to draw as many images/2D graphics as possible, without loosing to much performance. You can find the functions for drawing images, imagelines, rects, quads, etc. here: https://github.com/Chrise55/LLama3D/blob/master/Llama3DLibrary/src/com/llama3d/object/graphics/image/ImageBase.java Here an example how it looks with many images (testing artificial neural networks), it works fine, but already little bit slow with that many images... :(

    Read the article

  • PHP: form input field names containing square brackets like field[index]

    - by gidireich
    Hi, I've seen lot of code that handle forms, which creates input fields with names containing square brackets. I understand that this is being somehow converted to PHP arrays when a PHP script examines the $_POST variable. My questions about this: What is the mechanism behind? At which point this names that merely contain brackets are converted to arrays? Is this a feature of the HTPP protocol? Of web servers? Of the PHP language? Continuing the previous question, is this a commonly used hack or a normal programming tool? What are (all) the rules of using brackets in input field names? Can multidimensional arrays be created this way? Thanks, Gidi

    Read the article

  • Using a single texture image unit with multiple sampler uniforms

    - by bcrist
    I am writing a batching system which tracks currently bound textures in order to avoid unnecessary glBindTexture() calls. I'm not sure if I need to keep track of which textures have already been used by a particular batch so that if a texture is used twice, it will be bound to a different TIU for the second sampler which requires it. Is it acceptable for an OpenGL application to use the same texture image unit for multiple samplers within the same shader stage? What about samplers in different shader stages? For example: Fragment shader: ... uniform sampler2D samp1; uniform sampler2D samp2; void main() { ... } Main program: ... glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, tex_id); glUniform1i(samp1_location, 0); glUniform1i(samp2_location, 0); ... I don't see any reason why this shouldn't work, but what about if the shader program also included a vertex shader like this: Vertex shader: ... uniform sampler2D samp1; void main() { ... } In this case, OpenGL is supposed to treat both instances of samp1 as the same variable, and exposes a single location for them. Therefore, the same texture unit is being used in the vertex and fragment shaders. I have read that using the same texture in two different shader stages counts doubly against GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS but this would seem to contradict that. In a quick test on my hardware (HD 6870), all of the following scenarios worked as expected: 1 TIU used for 2 sampler uniforms in same shader stage 1 TIU used for 1 sampler uniform which is used in 2 shader stages 1 TIU used for 2 sampler uniforms, each occurring in a different stage. However, I don't know if this is behavior that I should expect on all hardware/drivers, or if there are performance implications.

    Read the article

  • Rspec: "array.should == another_array" but without concern for order

    - by nicholaides
    I often want to compare arrays and make sure that they contain the same elements, in any order. IS there a consise way to do this in RSpec? Here are methods that aren't acceptable: #to_set For example: array.to_set.should == another_array.to_set This fails when the arrays contain duplicate items. #sort For example: array.sort.should == another_array.sort This fails when the arrays elements don't implement #<=> #size and #to_set For example: array.to_set.should == another_array.to_set array.size.should == another_array.size This would work, but there's got to be a better way.

    Read the article

  • Change value of adjacent vertices and remove self loop

    - by StereoMatching
    Try to write a Karger’s algorithm with boost::graph example (first column is vertice, other are adjacent vertices): 1 2 3 2 1 3 4 3 1 2 4 4 2 3 assume I merge 2 to 1, I get the result 1 2 3 2 1 1 3 4 2 1 3 4 3 1 2 4 4 2 3 first question : How could I change the adjacent vertices("2" to "1") of vertice 1? my naive solution template<typename Vertex, typename Graph> void change_adjacent_vertices_value(Vertex input, Vertex value, Graph &g) { for (auto it = boost::adjacent_vertices(input, g); it.first != it.second; ++it.first){ if(*it.first == value){ *(it.first) = input; //error C2106: '=' : left operand must be l-value } } } Apparently, I can't set the value of the adjacent vertices to "1" by this way The result I want after "change_adjacent_vertices_value" 1 1 3 1 1 1 3 4 2 1 3 4 3 1 2 4 4 2 3 second question : How could I pop out the adjacent vertices? Assume I want to pop out the consecutive 1 from the vertice 1 The result I expected 1 1 3 1 3 4 2 1 3 4 3 1 2 4 4 2 3 any function like "pop_adjacent_vertex" could use?

    Read the article

  • error X3501: 'main': entrypoint not found

    - by Pasha
    I am trying to learn DX10 by following this tutorial. However, my shader won't compile. Below is the detailed error message. Build started 9/10/2012 10:22:46 PM. 1>Project "D:\code\dx\Engine\Engine\Engine.vcxproj" on node 2 (Build target(s)). C:\Program Files (x86)\Windows Kits\8.0\bin\x86\fxc.exe /nologo /E"main" /Fo "D:\code\dx\Engine\Debug\color.cso" /Od /Zi color.fx 1>FXC : error X3501: 'main': entrypoint not found compilation failed; no code produced 1>Done Building Project "D:\code\dx\Engine\Engine\Engine.vcxproj" (Build target(s)) -- FAILED. Build FAILED. Time Elapsed 00:00:00.05 I can easily compile the downloaded code, but I want to know how to fix this error myself. My color.fx looks like this //////////////////////////////////////////////////////////////////////////////// // Filename: color.fx //////////////////////////////////////////////////////////////////////////////// ///////////// // GLOBALS // ///////////// matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; ////////////// // TYPEDEFS // ////////////// struct VertexInputType { float4 position : POSITION; float4 color : COLOR; }; struct PixelInputType { float4 position : SV_POSITION; float4 color : COLOR; }; //////////////////////////////////////////////////////////////////////////////// // Vertex Shader //////////////////////////////////////////////////////////////////////////////// PixelInputType ColorVertexShader(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); // Store the input color for the pixel shader to use. output.color = input.color; return output; } //////////////////////////////////////////////////////////////////////////////// // Pixel Shader //////////////////////////////////////////////////////////////////////////////// float4 ColorPixelShader(PixelInputType input) : SV_Target { return input.color; } //////////////////////////////////////////////////////////////////////////////// // Technique //////////////////////////////////////////////////////////////////////////////// technique10 ColorTechnique { pass pass0 { SetVertexShader(CompileShader(vs_4_0, ColorVertexShader())); SetPixelShader(CompileShader(ps_4_0, ColorPixelShader())); SetGeometryShader(NULL); } }

    Read the article

  • Unity stuck in 2D mode, Nvidia Quadro graphics "unknown", Nvidia-Current active but not in use

    - by Jordan Lund
    I've seen this problem reported under several questions, but I haven't been able to resolve any of it so I thought I'd bring it all in under one umbrella. I started a new job and was given a Dell Precision M6400 laptop with Nvidia Quadro FX 2700M graphics card. It had a previous version of Ubuntu on it, but nobody had any passwords for it so I wiped the drive and did a fresh install of 11.10 from scratch. I didn't do any updates during installation, preferring to do them after boot. Updates ran fine and the system works... except Unity is in 2D mode. System Settings - Additional Drivers shows that Nvidia-Current is active but not in use. System Settings - System Info shows Graphics Driver Unknown, Experience Standard Nvidia X Server Settings is installed and working, re-writing the xorg.conf did nothing. /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 2700M/PCI/SSE2 OpenGL version string: 3.3.0 NVIDIA 285.05.09 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes One suggestion was to do a sudo apt-get --purge remove nvidia* and that resulted in a scrambled screen on boot and a non-bootable installation. Pressing the Delete key on boot allowed me to access the recovery console and do a sudo apt-get install nvidia-current, which brought me back to a working, bootable system. Another suggestion was to edit /etc/default/grub and change the line reading "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to read "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vmalloc=192MB" thus allocating more video RAM. I did that, followed by a sudo update-grub and a re-boot. No change. Created a brand new standard user and logged on with that account, no change.

    Read the article

  • How to gain accurate results with Painter's algorithm?

    - by pimvdb
    A while ago I asked how to determine when a face is overlapping another. The advice was to use a Z-buffer. However, I cannot use a Z-buffer in my current project and hence I would like to use the Painter's algorithm. I have no good clue as to when a surface is behind or in front of another, though. I've tried numerous methods but they all fail in edge cases, or they fail even in general cases. This is a list of sorting methods I've tried so far: Distance to midpoint of each face Average distance to each vertex of each face Average z value of each vertex Higest z value of vertices of each face and draw those first Lowest z value of vertices of each face and draw those last The problem is that a face might have a closer distance but is still further away. All these methods seem unreliable. Edit: For example, in the following image the surface with the blue point as midpoint is painted over the surface with the red point as midpoint, because the blue point is closer. However, this is because the surface of the red point is larger and the midpoint is further away. The surface with the red point should be painted over the blue one, because it is closer, whilst the midpoint distance says the opposite. What exactly is used in the Painter's algorithm to determine the order in which objects should be drawn?

    Read the article

  • Screen becomes black after pressing dash or alt-tab

    - by cegerxwin
    I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

    Read the article

  • How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

    - by martin
    As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

    Read the article

  • Ubuntu and bumblebee and intel problem

    - by LnxSlck
    I have a brain teaser that i can't solve. When 12.04 (64bits) came out, i did a fresh install and then installed bumblebee with: sudo add-apt-repository ppa:bumblebee/stable sudo apt-get install bumblebee bumblebee-nvidia And Ubuntu recognized (System Settings - Details) Intel Card for primary card, and i could launch applications with optirun. I have: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) Now, a few days back, i did the exact same thing, installed from the same DVD everything the same, installed bumblebee the same way. Nvidia with Optirun works fine, but Ubuntu doesn't have 3D effects: root@deathstar:~# optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 520MX/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I never did anything to install Intel drivers (except installing mesa-utils), before bumblebee got everything working, but now i can't get Ubuntu to get Unity with 3D. Can someone help me please get Unity 3d working? Your help will be much appreciated

    Read the article

  • Stage3D: Camera pans the whole screen

    - by Thomas Versteeg
    I am trying to create a 2D Stage3D game where you can move the camera around the level in an RTS style. I thought about using Orthographic Matrix3D functions for this but when I try to scroll the whole "stage" also scrolls. This is the Camera code: public function Camera2D(width:int, height:int, zoom:Number = 1) { resize(width, height); _zoom = zoom; } public function resize(width:Number, height:Number):void { _width = width; _height = height; _projectionMatrix = makeMatrix(0, width, 0, height); _recalculate = true; } protected function makeMatrix(left:Number, right:Number, top:Number, bottom:Number, zNear:Number = 0, zFar:Number = 1):Matrix3D { return new Matrix3D(Vector.<Number>([ 2 / (right - left), 0, 0, 0, 0, 2 / (top - bottom), 0, 0, 0, 0, 1 / (zFar - zNear), 0, 0, 0, zNear / (zNear - zFar), 1 ])); } public function get viewMatrix():Matrix3D { if (_recalculate) { _recalculate = false; _viewMatrix.identity(); _viewMatrix.appendTranslation( -_width / 2 - _x, -_height / 2 - y, 0); _viewMatrix.appendScale(_zoom, _zoom, 1); _renderMatrix.identity(); _renderMatrix.append(_viewMatrix); _renderMatrix.append(_projectionMatrix); } return _renderMatrix; } And the camera is send directly to the GPU with: c3d.setProgramConstantsFromMatrix(Context3DProgramType.VERTEX, 0, cameraMatrix, true); And these are the shaders: ------Vertex Shader------ m44 op, va0, vc0 mov v0, va1.xy mov v0.z, va0.z ------Fragment Shader------ tex ft0, v0, fs0 <2d,linear,nomip> mov oc, ft1 Here is a example and here are two screenshots to show what I mean: How do I only let the inside of the stage3D scroll and not the whole stage?

    Read the article

  • How can I pass an array of floats to the fragment shader using textures?

    - by James
    I want to map out a 2D array of depth elements for the fragment shader to use to check depth against to create shadows. I want to be able to copy a float array into the GPU, but using large uniform arrays causes segfaults in openGL so that is not an option. I tried texturing but the best i got was to use GL_DEPTH_COMPONENT glTexImage2D(GL_TEXTURE_2D, 0, GL_DEPTH_COMPONENT, 512, 512, 0, GL_DEPTH_COMPONENT, GL_FLOAT, smap); Which doesn't work because that stores depth components (0.0 - 1.0) which I don't want because I have no idea how to calculate them using the depth value produced by the light sources MVP matrix multiplied by the coordinate of each vertex. Is there any way to store and access large 2D arrays of floats in openGL?

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >