Search Results

Search found 609 results on 25 pages for '3g'.

Page 1/25 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • 3G USB Modem Not Working in 12.04

    - by Seyed Mohammad
    When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

    Read the article

  • 3G dongle and memory card detection

    - by user212632
    My questions is about 3G dongle (Huawei E1752) that I use for my internet on Ubuntu 12.04. The big issue is that ubuntu only recognise the dongle if I plug it in before booting up. But if somehow I loses connection (due to network being low) then the only way to use the 3G dongle again is to reboot my machine, which becomes a pain. I have the same issue with the memory card reader of my laptop whereby it only reads when I insert the card before booting up. My laptop is an Acer V3 -571g. At first I thought it was an issue that the model was quite new, but I have been updating my ubuntu for a while, and this issue has kept being the same

    Read the article

  • Using "MTNL 3G Jadoo" data card on Ubuntu

    - by amolbk
    I am trying to use "MTNL 3G Jadoo" data card (Teracom LW272) with Ubuntu 12.04. On connecting, it gets mounted as a drive containing the client installation .deb file. I opened the .deb file in Ubuntu Software Center and installed it. I searched for "MTNL" in Ubuntu search and found "MTNL 3G Modem" application. But it won't run. I found it is installed in /opt/MTNL-3GModem. I tried running it from the terminal as: sudo /opt/MTNL-3GModem/ModemClient, but no luck. Any idea how to get it working?

    Read the article

  • Huawei 3G modem disconnects after successful connection

    - by theo
    I'm having a severe connection problem in Ubuntu 12.04 that renders the OS almost useless. I have a Huawei E352 3G modem. Ubuntu detects it as a mobile broadband connection without any problem. I created a new connection by providing APN. Now after connection it disconnects after a few seconds, and the modem disappears from mobile broadband list. I tried various workarounds but neither worked. I had no problem in Ubuntu 11.10.

    Read the article

  • Unable to Connect to Internet with 3G USB Dongle for Particular ISP

    - by Kush
    I'm using USB 3G Dongle for Internet. Previously I was using Tata Docomo (India) as provider, and the Internet was working fine. Now I've changed to BSNL, but I'm unable to connect to the Internet on Ubuntu. However, I've checked access point settings and other configuration which are required for BSNL, and it is working fine with same Dongle on Windows 7. Also, I'm able to connect Internet with other providers on Ubuntu, but problem persists only with Ubuntu. The access point for BSNL in my region is bsnlnet. In fact I configure the Dongle with BSNL using default Network Configuration wizard that pops up when USB Dongle is attached. When Dongle is attached and configured with BSNL, I can see network strength in Messaging menu, in Mobile Broadband category, of Ubuntu (note: my network icon still shows "not connected" status). And when I try to use the connection that I've created, it fails to connect. So far, I tried using Sakis3g script that I came up with while wandering over this issue on other forums, it didn't worked either. I also made sure that there are no special configuration made for BSNL on my Windows 7 installation, and still it is working fine there, the problem is only with Ubuntu. How can I fix it?

    Read the article

  • 3G Huawei E220 cannot connect to the Net Ubuntu 12.04

    - by user60786
    I've upgraded from 10.10 to 12.04. The situation: I plug the dongle in and enter the password. If I click 'Enable Mobile Broadband' and I get a notice on the top right saying 'GSM network. You are now registered on the home network'. At this stage I have not actually connected and when I click my broadband connection i see that 'Enable Mobile Boardband' is unticked AGAIN and I cannot connect to my broadbnad connection when I click it.

    Read the article

  • NTFS-3G is only mounting external drives as read-only

    - by Phanto
    I'm currently running RHEL 5.5, and I installed the ntfs-3g utility from here: http://www.tuxera.com/community/ntfs-3g-download/. I have also followed their instructions for auto-mounting NTFS USB drives here: http://www.tuxera.com/community/ntfs-3g-faq/#plugandplay. The problem I'm experiencing is that ntfs-3g is automatically mounting as root. In order for me to obtain write support, I need to navigate to the mounted device as root, and perform write actions with elevated privileges. Is there a way to mount USB NTFS volumes automatically without needing to sudo every write command? Thanks!

    Read the article

  • Trying to configure HWIC-3G-HSPA

    - by user1174838
    I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

    Read the article

  • How to use NTFS-3G installed using MacPort?

    - by Raiyan Kabir
    After upgrading to Lion I'm having problem mounting NTFS drives in read/write mode. This is because NTFS-3G distributed by http://www.tuxera.com does not work with Lion. As far their suggestion I installed NTFS-3G using MacPort. But as far as I can see it does not come with the usual preference pane. Its not enabled by default. Do anyone know how to enable it? Or how to have the Preference Pane for the NTFS-3G from MacPorts.

    Read the article

  • Best way to connect a desktop computer to a 3g network

    - by dbyrne
    A friend of mine is moving to a building with no Internet connectivity. Ethernet and wifi are out of the question. What is the best way for him to get his desktop connected? The most obvious solution is for him to get an unlimited 3G data plan. What is the best way for him to set this up? I am assuming he should get something like Verizon's MiFi 3G access point, but does this have an ethernet jack?

    Read the article

  • Best way to connect a desktop computer to a 3g network

    - by dbyrne
    A friend of mine is moving to a building with no Internet connectivity. Ethernet and wifi are out of the question. What is the best way for him to get his desktop connected? The most obvious solution is for him to get an unlimited 3G data plan. What is the best way for him to set this up? I am assuming he should get something like Verizon's MiFi 3G access point, but does this have an ethernet jack?

    Read the article

  • Local Only 3G Router via Broadband Device?

    - by GateKiller
    I am looking for the name/type of device which does the following: Connects to the internet via ethernet or wireless and then produces a "fake" 3G signal for my iPhone to connect to. The 3G siginal in my office is very weak or non-existant and I need a way of boosting or replacing it.

    Read the article

  • NTFS and NTFS-3G

    - by MestreLion
    I have a netbook with Ubuntu Netbook 10.04 and a desktop with Mint 10 (~ Ubuntu Desktop 10.10) Both of them have read/write NTFS partitions mounted via /etc/fstab. And it works fine. Ive read on net, google, forums, and several posts here, that NTFS-3G is the driver that allows you to have full access to an NTFS partition, that it is new, great, powerful, yada-yada. But... my entries use plain ntfs, no mention of -3g, and they still work perfectly as read and write. Am I already using ntfs-3g? Does 10.04 onwards use it "under the hood"? How can i check that in my system? Should my /etc/fstab entries should use "ntfs-3g" as the fs? Why some posts refer to mount ntfs, while others say mount ntfs-3g ? Im really confused about where should I use fs-type names (ntfs) or driver names (ntfs-3g?). Or is it irrelevant now, and ntfs is always an "alias" or something for ntfs-3g nowadays? Ive read some posts her, from Oct-10 and Nov-10 e that "announce" that ntfs-3g "finally arrived"... thats way post-Lucid 10.04. Could someone please undo this mess in my head, and explain the relation between ntfs and ntfs-3g, what is the current status (10.04 and 10.10), where should i use each, etc (regarding mount, fstab, etc)? Sorry for the long, confusing, redudant text... im really getting sleepy

    Read the article

  • Socket options for a tcp server with 3G clients & frequent disconnections

    - by Joel
    I have a TCP server, written in java, sending and receiving many short messages, from 500 bytes to 100 KB long. It's a chess game and chat server, to make it simple. The server is running Debian 6. Half of the clients are connecting from 3G networks, and half over standard DSL. A portion of the 3G clients lose connection pretty often. The error I get on the server and on the client socket is Connection reset. I have come across this page at Oracle documentation: socketOpt. I am wondering what I could tune there to lower the number of disconnections from 3G clients. I don't mind about the ping or transfer rate, but just about the TCP disconnections. I am not skilled enough to understand the impact of each setting, but I sort of understood that the TCP window was important, although I don't know exactly how. So I'm asking if anyone here has an idea ? Thanks if you can help.

    Read the article

  • Puzzling TCP performance over 3G / UMTS

    - by lemonsqueeze
    I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

    Read the article

  • Wifi and 3G same time

    - by Skolleus
    For my App I need Data from both, a local Network and the Internet. The local Network (Wifi) has no connection to the internet so I have to use the mobile connection (3G for Example). But whenever I connect to the local Network, 3G stopps. After asking the Samsung Service, there is no way to change that in the UI. But they couldn't tell me, if there is a programmable Interface for that. There is a mobile access point inside, so there is a way to connect a Wifi device to the Internet (which means that both, a wifi and a 3G connection is possible the same time in that way). But for my App the phone/tab has to connect to the existing Network and use the 3G for Internet. So this is my question here. Is there a way to connect to an existing Network and using 3G for Internet the same time?

    Read the article

  • Share 3G connection over WiFi-LAN network

    - by kush.impetus
    This is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them. Laptop IP Address: 192.168.1.4 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 Desktop IP Address: 192.168.1.5 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 ASUS RT-N10+ Router IP Address: 192.168.1.4 Default Gateway: 192.168.1.2 I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router. Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points. Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC. What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to. Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify? Is that possible on the first hand? Please note that I am trying to implement the network without spending anything extra (for purchasing as USB WiFi adapter for PC, of course, which could have made the life lot easier for me). Thanks in advance

    Read the article

  • Macbook Pro 2.2ghz 2011 (OSX 10.6.7) problem with NTFS 3G

    - by James
    I installed NTFS 3G but now get the following error message when I try to plug in my external drive. I also get it on startup about my Windows partition. Uninstall/ reinstall does not work. NTFS-3G could not mount /dev/disk1s1at /volumes/freeagent GoFlex Drive because the following error occured: /library/filesystems/fuse.fs/support/fusefs.kext failed to load- (libkern/kext) link error; check the system/ kernel logs for errors or try kextutil(8). The MacFUSE file system is not available (71) Any help would be great. I'd hope to avoid reinstalling OS X if possible!

    Read the article

  • Automatically connect to 3G dialup connection

    - by Philipp
    I have a notebook with an internal 3G modem (a HUAWEI Mobile Connect) which appears to the system as a dialup modem. When I want to connect to the Internet, I need to open the charms bar, click settings, network, the modem and "connect" to open the dialup dialog on the desktop. When the connection is interrupted for some reason, I need to repeat these steps. Is there a way to configure Windows 8 to automatically (and preferably silently in the background) connect with this modem at system startup and automatically restore the connection should it get interrupted? As an operating system which is developed for mobile devices, I would expect it to be able to somehow be able to manage a always-on 3g connection.

    Read the article

  • My computer gets hosted when using 3G

    - by WeaklyTyped
    I recently activated 3G(UMTS) connection on my cellular network. I use Nokia S60 phone as a modem while connecting from Scientific Linux 6. While I am able to access net pretty well, the problem is my computer gets hosted. By using ip-address in a web-browser, anyone can access my localhost (running apache), this never happens with my wireline (ADSL) connection. Furthermore, even the Shell prompt changes from: [mach2@localhost ~]$ to [[email protected] ~]$ where XX.XX.XX.XX is the IP of the 3G connection. The very thought of putting my machine 'in the wild' is disconcerting. How can I rectify the situation without disabling services like apache, sshd and others?

    Read the article

  • Network tools not working with a 3G connection

    - by gAMBOOKa
    Some of my network tools stopped working after I switched to a 3G connection from a DSL one. Cain and Abel's sniffer, Metasploit, even the NMAP scanner. I'm using Windows 7. The 3G device in question is the Huawei E180. Here's the error I get when running NMAP WARNING: Using raw sockets because ppp2 is not an ethernet device. This probably won't work on Windows. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 5 seconds then retry. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 25 seconds then retry. Call to pcap_open_live(ppp2, 100, 0, 2) failed three times. Reported error: Error opening adapter: The system cannot find the device specified. (20) Metasploit's refused connection to my websites too.

    Read the article

  • Standby Internet connection by means of 3G Modem if Internet Fails

    - by Sarah Boss
    In my office I have 4 computers connected to the Internet with a DIR-615 Wireless N 300 router which gives Internet to all pc's via Ethernet cable. But sometimes this Internet goes off and I have to call the ISP and it takes them 2 days to repair it. I wanted to know if in such cases, can I connect my two zte 3g usb modems to this DIR-615 Wirless N300 router and get emergency Internet in my office? What other steps are required to set up this fail-safe connection?

    Read the article

  • Disabling Bluetooth crashes 3G: can I consider this a bug?

    - by workflow
    I'm on an Acer TravelMate 8372G here runnning Ubuntu 11.10 64bit and I get the following weird behaviour: As soon as I turn off bluetoooth, the built-in 3G connection disconnects and Network Manager is unable to reconnect, leaving the following track in syslog: NetworkManager[1205]: <warn> GSM modem enable failed: (32) Unknown error The only way I'm able to reconnect 3G is by going all the way through rfkill unblock bluetooth rfkill block wwan rfkill unblock wwan sudo service network-manager restart My question to you guys: should I file a bug, or is there any any logical connection I'm missing that makes this a feature? = thanks! workflow

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >