Search Results

Search found 255 results on 11 pages for 'bruce kinchin'.

Page 1/11 | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

  • Lessons on Software Development – From Bruce Lee!

    - by Jackie Goldstein
    While we as software developers are used to learning lessons and adopting techniques from other disciplines, it is not often that we look to the martial arts for new ideas on development approaches.  However, this blog post does just that. The author end with the following thought: In the end, follow Bruce Lee’s advice: Examine what others have to offer, take what is useful, and adapt it if necessary. I’ll close with an old quote: “The style doesn’t make the fighter, the fighter makes the style...(read more)

    Read the article

  • Les nombres flottants et leurs pièges, un article de Bruce Dawson traduit par Léo Gaspard

    Une partie des erreurs que l'on retrouve régulièrement en C++ vient d'une connaissance superficielle de la manipulation des nombres réels en informatique. Dans la série d'articles "flotting point", Bruce Dawson aborde en détail les problématiques liées à la représentation des nombres à virgule flottante. Ce premier article pose les bases et explore le monde étrange et merveilleux des mathématiques à virgule flottante. Les nombres flottants et leurs pièges Quels sont les principales difficultés que vous avez déjà rencontrées en manipulant les nombres à virgule flottant ?

    Read the article

  • Bruce Lee Software development.

    - by DesigningCode
    "Styles tend to not only separate men - because they have their own doctrines and then the doctrine became the gospel truth that you cannot change. But if you do not have a style, if you just say: Well, here I am as a human being, how can I express myself totally and completely? Now, that way you won't create a style, because style is a crystallization. That way, it's a process of continuing growth."- Bruce Lee This is kind of how I see software development. What I enjoyed in the the early days of Agile, things seemed very dynamic, people were working out all manner of ways of doing things. It was technique oriented, it was very fluid and people were finding all kinds of good ways of doing things.  Now when I look at the world of “Agile” it seems more crystalized.  In fact that seemed to be a goal, to crystalize the goodness so everyone can share.   I think mainly because it seems a heck of a lot easier to market.  People are more willing to accept a well defined doctrine and drink the Kool Aid.   Its more “corporate” or “professional”. But the process of crystalizing the goodness actually makes it bad.   But luckily in the world of software development there are still many people who are more focused on “how can I express myself totally and completely”.   We are seeing expressive languages, expressive frameworks, tooling that helps you to better express yourself, design techniques that allow you to better express your intent.    I love that stuff! So beware, be very cautious of anyone offering you new age wisdom based on crystals!

    Read the article

  • Experience the eBook – “Oracle SOA Suite – In the Customers’ Words” By Bruce Tierney

    - by JuergenKress
    Flip through the new free 25 page eBook describing the objectives and benefits of SOA with embedded video snippets from Oracle SOA Suite customers describing their experiences. Start with a quick overview in YouTube then follow the link provided within the video to access the eBook. Hope you enjoy it! SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA eBook,Fujitu,SOA Suite,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • BIWA Wednesday TechCast Series - Opposition to Data Warehouse Initiatives

    - by jenny.gelhausen
    BIWA Wednesday TechCast Series - 19th Event! Opposition to Data Warehouse Initiatives Please join us for this webcast on Wednesday, March 24, 12 noon Eastern or check your local area's time Webcast is open to clients, prospects and partners. No matter how good your technology and technical skills, organizational issues can derail a data warehousing or BI project. Therefore BIWA presents a vital topic that crosses product boundaries: organizational resistance to data warehouse initiatives - how to recognize it and what to do about it. Many a DW/BI professional has been surprised by organizational resistance to DW/BI initiatives. Yet real organizational imperatives may be behind this apparently irrational behavior. Based on in-depth interviews with IT professionals, industry consultants, and power users, our speaker Bruce Jenks will present his research findings about what drives organizational resistance to data warehouse initiatives. The talk will cover specific behaviors that can signal organizational resistance to a data warehouse program and what organizations have done to address such resistance. Presenter: Bruce Jenks of Dun and Bradstreet Bruce Jenks has over 20 years experience in data warehousing and business intelligence, much of it as a consultant to large organizations spanning the US. Bruce's data warehousing clients have included firms such as Sprint, Gallo Wines, Southern California Edison, The Gap, and Safeway. He started his data warehousing career at Metaphor Computers, a pioneering DW/BI firm from which a number of industry luminaries sprang including Ralph Kimball (author of The Data Warehouse Toolkit ). Bruce continued his data warehousing career at HP, Stanford University and other firms. Bruce is currently completing his doctorate in business administration at Golden Gate University, and today's material arises from his doctoral research. He is also a principal consultant for Dun and Bradstreet. Audio Dial-In: 866 682 4770 Audio Meeting ID: 1683901 Audio Meeting Passcode: 334451 Web Conference: Please register at https://www1.gotomeeting.com/register/807185273 After you register you will be provided with a link to the TechCast. Invitation to Speakers: All BIWA members and Oracle professionals (experts, end users, managers, DBAs, developers, data analysts, ISVs, partners, etc.) may submit abstracts for 45 minute technical webcasts to our Oracle BIWA (IOUG SIG) Community. Submit your BIWA TechCast abstract today! BIWA is a worldwide forum with over 2000 members who are business intelligence, warehousing and analytics professionals. BIWA presents information, experiences and best practices in successfully deploying Oracle Database-centric BI, Data Warehousing, and Analytics products, features and Options--the Oracle Database "BIWA" platform. Attendance Information & Replays at the BIWA website: oraclebiwa.org var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

    Read the article

  • Nautilus doesn't work

    - by bruce
    Whenever I open nautilus it crashes and I get this error in terminal. i am running saucy. does anybody know of a different file manger that i can install? sys:1: Warning: g_object_set: assertion 'G_IS_OBJECT (object)' failed totem-video-thumbnailer couldn't open file 'file:///home/bruce/New%20Project.ogv' sys:1: Warning: g_object_unref: assertion 'G_IS_OBJECT (object)' failed Segmentation fault (core dumped)

    Read the article

  • Windows CE Chat March 30, 2010

    - by Bruce Eitman
    Another great opportunity to ask Microsoft engineers your technical questions is coming up on Tuesday, March 30th.  These chats are your opportunity to get advice and answers from the engineers at Microsoft.   You may want to review the transcript from last month to get an idea about what kind of topics are discussed. Title:    Windows CE Live Chat! When:  Tuesday, March 30, 2010 9:00 - 10:00 A.M. Pacific Time   Add to Calendar Description: Do you have tough technical questions regarding Windows CE or Windows Mobile for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE chat and bring on the questions! Windows CE is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE operating system. To join this chat, please log on via the main MSDN chat page at: EnterChatRoom   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Online video tutorials for HTML 5

    - by Albers
    Here are some of the best introductory HTML5 videos I have found online/for free. Mix 2011: HTML5 for Skeptics - Scott Stansfield channel9.msdn.com/Events/MIX/MIX11/EXT21 Filling the HTML5 Gaps with Polyfills and Shims - Ray Bango channel9.msdn.com/Events/MIX/MIX11/HTM04 50 Performance Tricks to Make Your HTML5 Web Sites Faster - Jason Weber channel9.msdn.com/Events/MIX/MIX11/HTM01 TechEd 2011 HTML5 and CSS3 Techniques You Can Use Today - Todd Anglin channel9.msdn.com/Events/TechEd/NorthAmerica/2011/DEV334 Google IO HTML5 Showcase for Web Developers: The Wow and the How www.youtube.com/watch?v=WlwY6_W4VG8 css-tricks localStorage for Forms - Chris Coyier css-tricks.com/video-screencasts/96-localstorage-for-forms/ Best Practices with Dynamic Content - Chris Coyier This one talks about Hash Tags - take a look at the History API too css-tricks.com/video-screencasts/85-best-practices-dynamic-content/ localStorage for Forms - Chris Coyier css-tricks.com/video-screencasts/96-localstorage-for-forms/ Overview of HTML5 Forms Types, Attributes, and Elements - Chris Coyier css-tricks.com/video-screencasts/99-overview-of-html5-forms-types-attributes-and-elements/ Bruce Lawson - HTML5: Who, What, When, Why www.ubelly.com/2011/10/bruce-lawson-html5-who-what-when-why/ Bruce Lawson is an evangelist for Opera, and in this video he provides an overview including the history & philosophy of HTML5.

    Read the article

  • Platform Builder: Building Cloned Code from Multiple OS Versions

    - by Bruce Eitman
    My career goal is to delete more code than I write, and so far I have been fairly successful. But of course once in a while I need to clone code from the public tree which is contrary to my goal. Usually what follows is a new OS release. To help reach my goal, my team uses the same BSP code for multiple versions of the OS. That means that we need to handle the cloned code so that the correct code builds for the OS version that we are working on. To handle this we could use SKIPBUILD in the sources file, but that gets messy if the cloned code contains multiple folders. The solution that we use is to have a parent folder with subfolders that contain the OS version number. Example: PM |-PM500 |-PM600 |-PM700 The version number corresponds to the environment variable _WINCEOSVER. Then we have a simple DIRS file in the parent folder: DIRS=PM$( _WINCEOSVER) Which automatically selects the folder that goes with the OS version that we are building.   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Windows CE: Newsgroups Shutdown

    - by Bruce Eitman
    As of June 1, 2010 many of the Windows CE newsgroups have been shut down by Microsoft, and the rest will be shut down by October 1, 2010.  This is part of an overall Microsoft strategy to move community from newsgroups to web based forums. The newsgroups have been indexed by Google, so the existing content can and should be searched for answers using http://groups.google.com/advanced_search Microsoft has replaced the newsgroups with http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact which has forums for OS Development, Managed Application Development and Native Application Development. Note that with the planned release for Q4 2010, Microsoft is renaming Windows Embedded CE to Windows Embedded Compact.  This name change is reflected in the forum naming. Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Platform Builder: Disable the USB Driver Dialog

    - by Bruce Eitman
    For a long time, Windows CE developers and users have wanted to disable the USB Driver Dialog that is displayed when an unknown USB device is plugged into the host controller.   Of course the question is always why would you want to do such a thing? The simple answer is that there are USB devices that are needed, like printers, which expose multiple functions to the bus, like scanners and faxes, which no Windows CE driver exists to support.   So the printer quietly loads a driver, but then the other functions cause a dialog to be shown. One solution is to create a USB Class driver that loads by default if no other driver has been loaded. This driver just accepts anything that it sees and then does nothing with it. Starting with the Windows Embedded CE 6.0 R3 March QFE/update, the USB 2.0 driver has a registry value to disable the dialog: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients]       "DoNotPromptUser"=dword:0   Setting the DoNotPromptUser value to 1 disables the dialog. The default value is zero, so the driver continues to behave in the same way it always did unless you change this registry value.     Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Simple Little Registry Editor - New Release

    - by Bruce Eitman
    I have posted a new release of the Simple Little Registry Editor found in Windows CE: Simple Little Registry Editor.  This release fixes a problem with writing DWORD values when the most significant bit is set.  The application uses RegistryKey.SetValue.  There seems to be a problem with how the .NET CompactFramework (and the full framework) handle the second argument during the call which causes an exception. So the following does not work: RegistryKey.SetValue( "TestValue", 0xFFFFFFFF, RegistryValueKind.DWord ); But, this does: RegistryKey.SetValue( "TestValue",unchecked((int) 0xFFFFFFFF), RegistryValueKind.DWord ); Copyright © 2012 – Bruce Eitman All Rights Reserved

    Read the article

  • How to stop programs on starting from returning to log in screen?

    - by Bruce McKean
    I'm not a computer nerd but have been able to fix Ubuntu/Linux problems in the pass two years with a Google search but this on has me stumped. I upgraded to 12.04 about thirty days ago and all was well except that every time I tried to load KeePassX it would go to the login screen. I installed KeePass2 and all seemed to work. Last week I tried to load Bibble5 (Raw photo editor) and it would try to load and then back to the login screen. After a few days I gave up and downloaded Corel After Shot Pro (Corel's now owns Bibble5) and it has the same problem. Could someone please head me into the steps I need to follow to find out what is the cause. I'm interested in learning more about the Linux system how to correct any future problems thanks in advance – Bruce -Computer- Processor : 8x Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz Memory : 8155MB (1092MB used) Operating System : Ubuntu 12.04 LTS OpenGL Renderer : GeForce GT 520/PCIe/SSE2

    Read the article

  • Platform Builder: Cloning – the Linker is your Friend

    - by Bruce Eitman
    I was tasked this week with making a minor change to NetMsgBox() behavior. NetMsgBox() is a little function in NETUI that handles MessageBox() for the Network User Interface.  The obvious solution is to clone the entire NETUI directory from Public\Common\Oak\Drivers (see Platform Builder: Clone Public Code for more on cloning). If you haven’t already, take a minute to look in that folder. There are a lot of files in the folder, but I only needed to modify one function in one of those files. There must be a better way. Enter the linker. Instead of cloning the entire folder, here is what I did: Create a new folder in my Platform named NETUI (but the name isn’t important) Copy the C file that I needed to modify to the new folder, in this case netui.c Copy a makefile from one of the other folder (really they are all the same) Run Sysgen_capture Open a build window (see Platform Builder: Build Tools, Opening a Build Window) Change directories to the new folder Run “Sysgen_capture netui” Rename sources.netui to sources Add the C file to sources as SOURCES=netui.c Modify the code Build the code Done That is it, the functions from my new folder now replace the functions from the Public code and link with the rest to create NETUI.dll. There is a catches. If you remove any of the functions from the C file, linking will fail because the remaining functions will be found twice.   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Windows CE: SDK Doesn’t Show up in Visual Studio 2008

    - by Bruce Eitman
    A customer recently contacted me because after installing an SDK it didn’t show up in Visual Studio 2008.  So being a good vendor I installed VS2008 and then installed the SDK – no problem the SDK showed up and I could create projects based on it. I let the customer know that the SDK definitely works with VS2008. The customer got back to me and asked what OS I was using. Hmm, how could that play into this? I told him that I use Windows XP, and it turned out that he is way more modern than I am and is using both Windows Vista and 7. The customer opened a support case with Microsoft. The answer turns out to be that the SDK install requires the user to be logged on as an administrator when installing on Windows Vista and 7 for the SDK to show up in Visual Studio 2008. This problem does not seem to exist for Visual Studio 2005 on those operating systems. The actual instructions from Microsoft Support are: 1)      Make sure Visual Studio 2008 is not running. I also shut down the device emulator manager but you may not be using that. 2)      Open a “Visual Studio 2008 Command Prompt” as Administrator. On Windows 7 just right click the short cut and pick the “Run as administrator” option. 3)      Enter the following command: msiexec /log SDKInstallLog.txt /package <the path to your .msi file> 4)      When asked if you wish to do a custom or complete install pick custom 5)      Instruct the installer to omit the installation of the documentation. This was something I found about CE 6 SDK installation issue and may have no bearing upon your problem but I did it anyway. 6)      Install   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Windows Embedded CE DiskPrep PowerToy

    - by Bruce Eitman
    Kurt Kennett from Microsoft has offered up a handy new tool. This tool is useful for creating a boot disk for x86 Windows CE systems that use the BIOSLoader. This is especially useful for creating disks with formats other than FAT16, which are fairly easy to create. I am letting you know about this new tool, but I have to be honest in telling you that I haven’t used it myself because it is for Windows Vista and Windows 7 – which I don’t have available right now. But you can bet that I will be setting up a virtual machine to give it a try. Here is what Kurt has to say about the tool: Download the DiskPrep Tool  DiskPrep can prepare any hard disk that can be attached to your development PC so that it can boot your X86-based Windows CE OS Design. USB disks (including disk "keys"), Compact Flash Cards, and SD cards all work if your system bios can boot from that type of media. FAT16, FAT32, and exFAT all supported. DOS is not used - the program prepares the bios loader on the disk and only uses that. If you use Windows Vista or Windows 7, you can use VHD files for VirtualPC. This allows for rapid prototyping of a self-booting system. Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Platform Builder: PBWorkspaces CESysgen.bat Not Used?

    - by Bruce Eitman
    One of the things that I like about Windows CE is that I am always learning new things, but in this case it is a bit disturbing. We working with Multi UI (MUI) this week and discovered some problems with Windows CE 5.0 and Chinese language support. These problems don’t exist in CE 6.0. The problem was that in the batch files in Public\CEBASE\oak\misc, specifically weceshellfe.bat, some of the shell components needed are only included if certain LOCALs are selected. English is not one of them, I suppose this is because someone didn’t think that we would ever use them and English – doh. No problem, just work around this in PBWorkspaces\<workspace>\WINCE500\<BPS>\cesysgen.bat. But that didn’t work. After a lot of trial and error, what I determined is that this cesysgen.bat isn’t actually used by Platform Builder any more.  Instead, in that same folder is a <workspace>.bat file that is called by Public\CEBASE\oak\misc\cesysgen.bat. That leads to some new problems though, but solvable, in that what I really wanted to do was add a fix after the batch files in CEBASE run, but <workspace>.bat runs before the other batch files in CEBASE. So what I finally came up with was to add the fix to the PASS2 handling in <workspace>.bat. Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Platform Builder: Removing the Version Information from the Desktop

    - by Bruce Eitman
    The question of how to remove the version information from the desktop has been around for a long time. It came up again today. The question is about the string displayed on the desktop that looks like one of these, depending on the OS verison: Windows Embedded CE v6.00 (Build xxxx on xxxx) Microsoft Windows CE v5.00 (Build xxxx on xxxx) Microsoft Windows CE .NET v4.20 (Build xxxx on xxxx) I have looked into this in the past, but never really had a definitive answer. I have an answer now. The short answer is that the version information is displayed if the code is built without SHIP_BUILD defined.  I have to be honest, I have given this answer in the newsgroups in the past, but I still had questions. My questions have come from different build machines giving different results.   I have noticed that some engineer’s workstations would have the version information displayed, while others did not. I always stopped short of spending time investigating further because our release build machines never resulted in the version information being displayed. But, we do not typically define SHIP_BUILD for our releases because our customers want or need the debug output. So today I dug further into the question. The answer is actually quite simple. Microsoft builds the retail shell libraries with SHIP_BUILD defined and releases the libraries with Platform Builder. Normally the source code does not need to be built during Sysgen, so the libraries that Microsoft delivered are linked to create the Explorer shell. So typically the Explorer shell displays the version information for debug builds, but does not for retail builds. The trouble comes when the source code is forced to be rebuilt for a retail build. This might happen if an engineer uses “Build and Sysgen” or builds the Public\Shell folder from the command line with the clean flag. I am not sure if Build and Sysgen will cause the problem or not – I have never used Build and Sysgen and I strongly advise against using it (see Platform Builder: Don’t use Build and Sysgen) Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • SQLBits VI – The sixth sets

    - by Rob Farley
    My involvement stopped with the tagline, but SQLBits VI is on tomorrow. The theme of the event is Performance Tuning, which has nothing to do with Bruce Willis or dead people – unless Bruce Willis has just become a database expert and been shot for doing a dropping an index (some would say that’s a crime worthy of the death penalty). It’s a shame my involvement hasn’t been more, because it’s such a terrific event, and it would’ve been good to have been there for a second time. It’s a long way to...(read more)

    Read the article

  • Windows CE: Changing Static IP Address

    - by Bruce Eitman
    A customer contacted me recently and asked me how to change a static IP address at runtime.  Of course this is not something that I know how to do, but with a little bit of research I figure out how to do it. It turns out that the challenge is to request that the adapter update itself with the new IP Address.  Otherwise, the change in IP address is a matter of changing the address in the registry for the adapter.   The registry entry is something like: [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp]    "EnableDHCP"=dword:0    "IpAddress"="192.168.0.100"     "DefaultGateway"="192.168.0.1"    "Subnetmask"="255.255.255.0" Where LAN90001 would be replace with your adapter name.  I have written quite a few articles about how to modify the registry, including a registry editor that you could use. Requesting that the adapter update itself is a matter of getting a handle to the NDIS driver, and then asking it to refresh the adapter.  The code is: #include <windows.h> #include "winioctl.h" #include "ntddndis.h"   void RebindAdapter( TCHAR *adaptername ) {       HANDLE hNdis;       BOOL fResult = FALSE;       int count;         // Make this function easier to use - hide the need to have two null characters.       int length = wcslen(adaptername);       int AdapterSize = (length + 2) * sizeof( TCHAR );       TCHAR *Adapter = malloc(AdapterSize);       wcscpy( Adapter, adaptername );       Adapter[ length ] = '\0';       Adapter[ length +1 ] = '\0';           hNdis = CreateFile(DD_NDIS_DEVICE_NAME,                   GENERIC_READ | GENERIC_WRITE,                   FILE_SHARE_READ | FILE_SHARE_WRITE,                   NULL,                   OPEN_ALWAYS,                   0,                   NULL);         if (INVALID_HANDLE_VALUE != hNdis)       {             fResult = DeviceIoControl(hNdis,                         IOCTL_NDIS_REBIND_ADAPTER,                         Adapter,                         AdapterSize,                         NULL,                         0,                         &count,                         NULL);             if( !fResult )             {                   RETAILMSG( 1, (TEXT("DeviceIoControl failed %d\n"), GetLastError() ));             }             CloseHandle(hNdis);       }       else       {             RETAILMSG( 1, (TEXT("Failed to open NDIS Handle\n")));       }   }       int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR    lpCmdLine, int       nCmdShow) {     RebindAdapter( TEXT("LAN90001") );     return 0; }   If you don’t want to write any code, but instead plan to use a registry editor to change the IP Address, then there is a command line utility to do the same thing.  NDISConfig.exe can be used: Ndisconfig adapter rebind LAN90001    Copyright © 2012 – Bruce Eitman All Rights Reserved

    Read the article

  • Windows CE: Using IOCTL_DISK_GET_STORAGEID

    - by Bruce Eitman
    A customer approached me recently to ask if I had any code that demonstrated how to use STORAGE_IDENTIFICATION, which is the data structure used to get the Storage ID from a disk. I didn’t have anything, which of course sends me off writing code and blogging about it. Simple enough, right? Go read the documentation for STORAGE_IDENTIFICATION which lead me to IOCTL_DISK_GET_STORAGEID. Except that the documentation for IOCTL_DISK_GET_STORAGEID seems to have a problem.   The most obvious problem is that it shows how to call CreateFile() to get the handle to use with DeviceIoControl(), but doesn’t show how to call DeviceIoControl(). That is odd, but not really a problem. But, the call to CreateFile() seems to be wrong, or at least it was in my testing. The documentation shows the call to be: hVolume = CreateFile(TEXT("\Storage Card\Vol:"), GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); I tried that, but my testing with an SD card mounted as Storage Card failed on the call to CreateFile(). I tried several variations of this, but none worked. Then I remembered that some time ago I wrote an article about enumerating the disks (Windows CE: Displaying Disk Information). I pulled up that code and tried again with both the disk device name and the partition volume name. The disk device name worked. The device names are DSKx:, where x is the disk number. I created the following function to output the Manufacturer ID and Serial Number returned from IOCTL_DISK_GET_STORAGEID:   #include "windows.h" #include "Diskio.h"     BOOL DisplayDiskID( TCHAR *Disk ) {                 STORAGE_IDENTIFICATION *StoreID = NULL;                 STORAGE_IDENTIFICATION GetSizeStoreID;                 DWORD dwSize;                 HANDLE hVol;                 TCHAR VolumeName[MAX_PATH];                 TCHAR *ManfID;                 TCHAR *SerialNumber;                 BOOL RetVal = FALSE;                 DWORD GLE;                   // Note that either of the following works                 //_stprintf(VolumeName, _T("\\%s\\Vol:"), Disk);                 _stprintf(VolumeName, _T("\\%s"), Disk);                   hVol = CreateFile( Disk, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL);                   if( hVol != INVALID_HANDLE_VALUE )                 {                                 if(DeviceIoControl(hVol, IOCTL_DISK_GET_STORAGEID, (LPVOID)NULL, 0, &GetSizeStoreID, sizeof(STORAGE_IDENTIFICATION), &dwSize, NULL) == FALSE)                                 {                                                 GLE = GetLastError();                                                 if( GLE == ERROR_INSUFFICIENT_BUFFER )                                                 {                                                                 StoreID = (STORAGE_IDENTIFICATION *)malloc( GetSizeStoreID.dwSize );                                                                 if(DeviceIoControl(hVol, IOCTL_DISK_GET_STORAGEID, (LPVOID)NULL, 0, StoreID, GetSizeStoreID.dwSize, &dwSize, NULL) != FALSE)                                                                 {                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Flags %X\r\n"), StoreID->dwFlags ));                                                                                 if( !(StoreID->dwFlags & MANUFACTUREID_INVALID) )                                                                                 {                                                                                                 ManfID = (TCHAR *)((DWORD)StoreID + StoreID->dwManufactureIDOffset);                                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Manufacture ID %s\r\n"), ManfID ));                                                                                 }                                                                                 if( !(StoreID->dwFlags & SERIALNUM_INVALID) )                                                                                 {                                                                                                 SerialNumber = (TCHAR *)((DWORD)StoreID + StoreID->dwSerialNumOffset);                                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Serial Number %s\r\n"), SerialNumber ));                                                                                 }                                                                                 RetVal = TRUE;                                                                 }                                                                 else                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: DeviceIoControl failed (%d)\r\n"), GLE));                                                                                                                                                 free(StoreID);                                                 }                                                 else                                                                 RETAILMSG( 1, (TEXT("No Disk Identifcation available for %s\r\n"), VolumeName ));                                 }                                 else                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: DeviceIoControl succeeded (and shouldn't have)\r\n")));                                                                                 CloseHandle (hVol);                 }                 else                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Failed to open volume (%s)\r\n"), VolumeName ));                   return RetVal; } Further testing showed that both \DSKx: and \DSKx:\Vol: work when calling CreateFile();   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Visual Studio Macros on 64 bit fail with COM error

    - by bruce.kinchin
    I'm doing some javascript development and found a cool macro to region my code ("Using #region Directive With JavaScript Files in Visual Studio"). I used this on my 32 bit box, and it worked first time. (Visual Studio 2008 SP1, Win7) For easy of reference the macro is: Option Strict Off Option Explicit Off Imports System Imports EnvDTE Imports EnvDTE80 Imports System.Diagnostics Imports System.Collections Public Module JsMacros Sub OutlineRegions() Dim selection As EnvDTE.TextSelection = DTE.ActiveDocument.Selection Const REGION_START As String = "//#region" Const REGION_END As String = "//#endregion" DTE.ExecuteCommand("Edit.StopOutlining") selection.SelectAll() Dim text As String = selection.Text selection.StartOfDocument(True) Dim startIndex As Integer Dim endIndex As Integer Dim lastIndex As Integer = 0 Dim startRegions As Stack = New Stack() Do startIndex = text.IndexOf(REGION_START, lastIndex) endIndex = text.IndexOf(REGION_END, lastIndex) If startIndex = -1 AndAlso endIndex = -1 Then Exit Do End If If startIndex <> -1 AndAlso startIndex < endIndex Then startRegions.Push(startIndex) lastIndex = startIndex + 1 Else ' Outline region ... selection.MoveToLineAndOffset(CalcLineNumber(text, CInt(startRegions.Pop())), text.Length) selection.MoveToLineAndOffset(CalcLineNumber(text, endIndex) + 1, 1, True) selection.OutlineSection() lastIndex = endIndex + 1 End If Loop selection.StartOfDocument() End Sub Private Function CalcLineNumber(ByVal text As String, ByVal index As Integer) Dim lineNumber As Integer = 1 Dim i As Integer = 0 While i < index If text.Chars(i) = vbCr Then lineNumber += 1 i += 1 End If i += 1 End While Return lineNumber End Function End Module I then tried to use the same macro on two separate 64 bit machines (Win7 x64), identical other than the 64 bit OS version and it fails to work. Stepping through it with the Visual Studio Macros IDE, it fails the first time on the DTE.ExecuteCommand("Edit.StopOutlining") line with a COM error (Error HRESULT E_FAIL has been returned from a call to a COM component). If I attempt to run it a second time, I can run it from the Macro Editor with no issue, but not from within Visual Studio with the macro explorer 'run macro' command. I have reviewed the following articles without finding anything helpful: Stackoverflow: Visual Studio 2008 macro only works from the Macro IDE, not the Macro Explorer Recorded macro does not run; Failing on DTE.ExecuteCommand Am I missing something dumb?

    Read the article

  • Windows Server 2003 R2 Standard: Locks MS Office files, but not Adobe .AI and .PSD files?

    - by Bruce Garlock
    We have some shares setup on a Windows 2003 R2 server, and the MS Office files people save behave properly: The first person to open the file gets read/write, and the second person to open the file while the first person still has the file open, gets a read-only version. This is not true for the graphics files, like Adobe Illustrator .AI files, and Photoshop .PSD files. Anyone who goes to open these files has full read/write, even if someone else is already working on the file! This has lead to numerous file corruption issues, as well as other lost work, since it always saves the last changes to the file. How do we get Windows to properly lock these files so when someone is working on a file, and someone else wants to open one, they get read-only access? Many thanks, Bruce

    Read the article

  • C#: My World Clock

    - by Bruce Eitman
    [Placeholder:  I will post the entire project soon] I have been working on cleaning my office of 8 years of stuff from several engineers working on many projects.  It turns out that we have a few extra single board computers with displays, so at the end of the day last Friday I though why not create a little application to display the time, you know, a clock.  How difficult could that be?  It turns out that it is quite simple – until I decided to gold plate the project by adding time displays for our offices around the world. I decided to use C#, which actually made creating the main clock quite easy.   The application was simply a text box and a timer.  I set the timer to fire a couple of times a second, and when it does use a DateTime object to get the current time and retrieve a string to display. And I could have been done, but of course that gold plating came up.   Seems simple enough, simply offset the time from the local time to the location that I want the time for and display it.    Sure enough, I had the time displayed for UK, Italy, Kansas City, Japan and China in no time at all. But it is October, and for those of us still stuck with Daylight Savings Time, we know that the clocks are about to change.   My first attempt was to simply check to see if the local time was DST or Standard time, then change the offset for China.  China doesn’t have Daylight Savings Time. If you know anything about the time changes around the world, you already know that my plan is flawed – in a big way.   It turns out that the transitions in and out of DST take place at different times around the world.   If you didn’t know that, do a quick search for “Daylight Savings” and you will find many WEB sites dedicated to tracking the time changes dates, and times. Now the real challenge of this application; how do I programmatically find out when the time changes occur and handle them correctly?  After a considerable amount of research it turns out that the solution is to read the data from the registry and parse it to figure out when the time changes occur. Reading Time Change Information from the Registry Reading the data from the registry is simple, using the data is a little more complicated.  First, reading from the registry can be done like:             byte[] binarydata = (byte[])Registry.GetValue("HKEY_LOCAL_MACHINE\\Time Zones\\Eastern Standard Time", "TZI", null);   Where I have hardcoded the registry key for example purposes, but in the end I will use some variables.   We now have a binary blob with the data, but it needs to be converted to use the real data.   To start we will need a couple of structs to hold the data and make it usable.   We will need a SYSTEMTIME and REG_TZI_FORMAT.   You may have expected that we would need a TIME_ZONE_INFORMATION struct, but we don’t.   The data is stored in the registry as a REG_TZI_FORMAT, which excludes some of the values found in TIME_ZONE_INFORMATION.     struct SYSTEMTIME     {         internal short wYear;         internal short wMonth;         internal short wDayOfWeek;         internal short wDay;         internal short wHour;         internal short wMinute;         internal short wSecond;         internal short wMilliseconds;     }       struct REG_TZI_FORMAT     {         internal long Bias;         internal long StdBias;         internal long DSTBias;         internal SYSTEMTIME StandardStart;         internal SYSTEMTIME DSTStart;     }   Now we need to convert the binary blob to a REG_TZI_FORMAT.   To do that I created the following helper functions:         private void BinaryToSystemTime(ref SYSTEMTIME ST, byte[] binary, int offset)         {             ST.wYear = (short)(binary[offset + 0] + (binary[offset + 1] << 8));             ST.wMonth = (short)(binary[offset + 2] + (binary[offset + 3] << 8));             ST.wDayOfWeek = (short)(binary[offset + 4] + (binary[offset + 5] << 8));             ST.wDay = (short)(binary[offset + 6] + (binary[offset + 7] << 8));             ST.wHour = (short)(binary[offset + 8] + (binary[offset + 9] << 8));             ST.wMinute = (short)(binary[offset + 10] + (binary[offset + 11] << 8));             ST.wSecond = (short)(binary[offset + 12] + (binary[offset + 13] << 8));             ST.wMilliseconds = (short)(binary[offset + 14] + (binary[offset + 15] << 8));         }             private REG_TZI_FORMAT ConvertFromBinary(byte[] binarydata)         {             REG_TZI_FORMAT RTZ = new REG_TZI_FORMAT();               RTZ.Bias = binarydata[0] + (binarydata[1] << 8) + (binarydata[2] << 16) + (binarydata[3] << 24);             RTZ.StdBias = binarydata[4] + (binarydata[5] << 8) + (binarydata[6] << 16) + (binarydata[7] << 24);             RTZ.DSTBias = binarydata[8] + (binarydata[9] << 8) + (binarydata[10] << 16) + (binarydata[11] << 24);             BinaryToSystemTime(ref RTZ.StandardStart, binarydata, 4 + 4 + 4);             BinaryToSystemTime(ref RTZ.DSTStart, binarydata, 4 + 16 + 4 + 4);               return RTZ;         }   I am the first to admit that there may be a better way to get the settings from the registry and into the REG_TXI_FORMAT, but I am not a great C# programmer which I have said before on this blog.   So sometimes I chose brute force over elegant. Now that we have the Bias information and the start date information, we can start to make sense of it.   The bias is an offset, in minutes, from local time (if already in local time for the time zone in question) to get to UTC – or as Microsoft defines it: UTC = local time + bias.  Standard bias is an offset to adjust for standard time, which I think is usually zero.   And DST bias is and offset to adjust for daylight savings time. Since we don’t have the local time for a time zone other than the one that the computer is set to, what we first need to do is convert local time to UTC, which is simple enough using:                 DateTime.Now.ToUniversalTime(); Then, since we have UTC we need to do a little math to alter the formula to: local time = UTC – bias.  In other words, we need to subtract the bias minutes. I am ahead of myself though, the standard and DST start dates really aren’t dates.   Instead they indicate the month, day of week and week number of the time change.   The dDay member of SYSTEM time will be set to the week number of the date change indicating that the change happens on the first, second… day of week of the month.  So we need to convert them to dates so that we can determine which bias to use, and when to change to a different bias.   To do that, I wrote the following function:         private DateTime SystemTimeToDateTimeStart(SYSTEMTIME Time, int Year)         {             DayOfWeek[] Days = { DayOfWeek.Sunday, DayOfWeek.Monday, DayOfWeek.Tuesday, DayOfWeek.Wednesday, DayOfWeek.Thursday, DayOfWeek.Friday, DayOfWeek.Saturday };             DateTime InfoTime = new DateTime(Year, Time.wMonth, Time.wDay == 1 ? 1 : ((Time.wDay - 1) * 7) + 1, Time.wHour, Time.wMinute, Time.wSecond, DateTimeKind.Utc);             DateTime BestGuess = InfoTime;             while (BestGuess.DayOfWeek != Days[Time.wDayOfWeek])             {                 BestGuess = BestGuess.AddDays(1);             }             return BestGuess;         }   SystemTimeToDateTimeStart gets two parameters; a SYSTEMTIME and a year.   The reason is that we will try this year and next year because we are interested in start dates that are in the future, not the past.  The function starts by getting a new Datetime with the first possible date and then looking for the correct date. Using the start dates, we can then determine the correct bias to use, and the next date that time will change:             NextTimeChange = StandardChange;             CurrentBias = TimezoneSettings.Bias + TimezoneSettings.DSTBias;             if (DSTChange.Year != 1 && StandardChange.Year != 1)             {                 if (DSTChange.CompareTo(StandardChange) < 0)                 {                     NextTimeChange = DSTChange;                     CurrentBias = TimezoneSettings.StdBias + TimezoneSettings.Bias;                 }             }             else             {                 // I don't like this, but it turns out that China Standard Time                 // has a DSTBias of -60 on every Windows system that I tested.                 // So, if no DST transitions, then just use the Bias without                 // any offset                 CurrentBias = TimezoneSettings.Bias;             }   Note that some time zones do not change time, in which case the years will remain set to 1.   Further, I found that the registry settings are actually wrong in that the DST Bias is set to -60 for China even though there is not DST in China, so I ignore the standard and DST bias for those time zones. There is one thing that I have not solved, and don’t plan to solve.  If the time zone for this computer changes, this application will not update the clock using the new time zone.  I tell  you this because you may need to deal with it – I do not because I won’t let the user get to the control panel applet to change the timezone. Copyright © 2012 – Bruce Eitman All Rights Reserved

    Read the article

1 2 3 4 5 6 7 8 9 10 11  | Next Page >