Search Results

Search found 9118 results on 365 pages for 'chris power'.

Page 1/365 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Battery management doesn't recognize removal of power supply

    - by Jason
    I have a Lenovo Y460p running Ubuntu 12.04 (64-bit). The battery does charge normally, but unplugging the power supply only very briefly shows the correct battery indicator. After about 1 second, it reverts to the charging indicator. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My problem is almost exactly like the one in this post: Ubuntu 11.10 power management does not recognize removal of power supply The only exception is that my system does not dual-boot with Windows. This is Ubuntu only. The computer in the other post is a Lenovo as well; not sure if that has anything to do with it. Any help would be greatly appreciated. Thanks.

    Read the article

  • Custom built machine has much higher power consumption than expected

    - by foraidt
    I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

    Read the article

  • UPS vs Solar Power in case of power failure for a server [on hold]

    - by Zen 8000k
    I am looking for a low power, low end pc able to run 24/7 without overheating and a way to support it in case of power failure. Power failures can be up to 72 hours. The pc dosen't need a monitor or keyboard. A modem must also be protected in case of power failure. When i say low end, i don't mean crap. The cpu needs to be x86 and have at least 1k cpu in this chart: http://www.cpubenchmark.net/index.php What's the best way to do this? EDIT: more info. I need to run a home server. The server will perform light tasks mainly. A x86 cpu sadly is the only route for my use. I want to be able to run the server and the router/modem in case of power failure. Now, regarding how long the power will fail: 1) 1 hours is OK for most situations. (say 90%) 2) 3 hours is OK (say 98%) 3) 6 hours is more thank OK. (say 99.5%) 4) On extreme cases the power might fail days. I believe this is very unlikely to happen. More is great but, really, how ofter power will fail more than 3 hours? I believe once every year at best. Well, that's too rare to care about. Given the above, I am looking for a cost effective way to archive 1-3 hour power or 6 hour if possible. Solutions: You guys give me great ideas. 1) Power generator: no good as power will fail for 10 seconds before returning. Also I read online, "clean" power generators cost 1.5k+, so it's out of budged. Non clean generator might damage electronics, right? 2) Solar power: i don't know for sure about this. Sounds like a great idea, too good to be true, honestly. For only 200$ i get 100+w? What are the drawbacks here? 3) UPS: This seems to be the best. The only problem is the cost. Cost < 200$ = great 400$ = budged limit

    Read the article

  • Ubuntu 11.10 power management does not recognize removal of power supply!

    - by sema
    I have a Lenovo Ideapad Z370 with Ubuntu 11.10 and the battery status indicator shows wrong information. Problem: The indicator always shows that the power supply is connected, even if it's not connected. The battery charges and discharges normally. However, the status information is wrong. When charging, the "time to charge" decreases, and when discharging the "time to charge" increases. If the power supply is connected the power statistics show: "Supply Yes" "Online Yes" If it is not connected it shows: "Supply Yes" "Online No" My trials: I tried reinstalling the indicator applet, but that doesn't help. Searching for solutions or similar problems didn't point out any help. Background: The problem occured after I switched the battery mode in Windows. (I use a dual boot system.) Lenovo drivers allow a "battery runtime mode" for maximum runtime and a "battery health mode" for maximum battery lifetime. I initially used the runtime mode, tried the health mode for some time, but switched back to the runtime mode. The problem occured after switching to health mode. Does anyone have an idea what is wrong? The problem is relevant for me as I get no information when battery status low and the computer runs out of energy without shutdown or hibernation. This is really a problem for me!

    Read the article

  • Power supply triggered to start by another power supply

    - by steampowered
    I am building a raid array in a separate enclosure. I will be putting an empty tower case next to an existing tower computer, and this second tower case will only hold hard drives. There are many solutions for connecting the drives in the second case to the raid card in the first case (SFF-8088 and SFF-8087 cables). But I prefer not to run power from the first case to the second case. Can I use a power supply in the first tower case and cause it to start the power supply in the second case based on an indication from power in the first tower case's power supply? Maybe run a 12 volt cable from the first case to the power supply on the second case only for the purpose of initiating the second power supply.

    Read the article

  • how to set power plan / power profile for battery

    - by user86274
    How can i setup different power profile settings? For example i want to set low screen brightness when i am on battery power and full brightness when i am not. From "power settings" i can setup brightness but it is persistent no matter what power i use. Is there any software that i can use to prolong my battery power when i use ubuntu? I can use my laptop at least 1 more hour when i am using windows....

    Read the article

  • "power limit notification" clobbering on 12G Dell servers with RHEL6

    - by Andrew B
    Server: Poweredge r620 OS: RHEL 6.4 Kernel: 2.6.32-358.18.1.el6.x86_64 I'm experiencing application alarms in my production environment. Critical CPU hungry processes are being starved of resources and causing a processing backlog. The problem is happening on all the 12th Generation Dell servers (r620s) in a recently deployed cluster. As near as I can tell, instances of this happening are matching up to peak CPU utilization, accompanied by massive amounts of "power limit notification" spam in dmesg. An excerpt of one of these events: Nov 7 10:15:15 someserver [.crit] CPU12: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU6: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU14: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Package power limit notification (total events = 11) Nov 7 10:15:15 someserver [.crit] CPU6: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU14: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU20: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Package power limit notification (total events = 12) Nov 7 10:15:15 someserver [.crit] CPU10: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU20: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU10: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU15: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU3: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU1: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU5: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU15: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU3: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU1: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU5: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU19: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Package power limit notification (total events = 377) Nov 7 10:15:15 someserver [.crit] CPU9: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU21: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU23: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU11: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU19: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU9: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU21: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU23: Package power limit notification (total events = 374) A little Google Fu reveals that this is typically associated with the CPU running hot, or voltage regulation kicking in. I don't think that's what is happening though. Temperature sensors for all servers in the cluster are running fine, Power Cap Policy is disabled in the iDRAC, and my System Profile is set to "Performance" on all of these servers: # omreport chassis biossetup | grep -A10 'System Profile' System Profile Settings ------------------------------------------ System Profile : Performance CPU Power Management : Maximum Performance Memory Frequency : Maximum Performance Turbo Boost : Enabled C1E : Disabled C States : Disabled Monitor/Mwait : Enabled Memory Patrol Scrub : Standard Memory Refresh Rate : 1x Memory Operating Voltage : Auto Collaborative CPU Performance Control : Disabled A Dell mailing list post describes the symptoms almost perfectly. Dell suggested that the author try using the Performance profile, but that didn't help. He ended up applying some settings in Dell's guide for configuring a server for low latency environments and one of those settings (or a combination thereof) seems to have fixed the problem. Kernel.org bug #36182 notes that power-limit interrupt debugging was enabled by default, which is causing performance degradation in scenarios where CPU voltage regulation is kicking in. A RHN KB article (RHN login required) mentions a problem impacting PE r620 and r720 servers not running the Performance profile, and recommends an update to a kernel released two weeks ago. ...Except we are running the Performance profile... Everything I can find online is running me in circles here. What's the heck is going on?

    Read the article

  • Acer Laptop does not power up after repairing DC power jack

    - by Misbah Mashkoor
    I have an Acer travelmate laptop which (by mistake) I dropped on the floor with the power jack side down, with the charger connected and it broke the DC jack from the inside of the laptop. Then I unscrewed the laptop and soldered the DC jack back and then plugged it in and switched on the laptop without the batteries. It did switch on, that was before screwing everything back. Then after assembling the whole thing back it does not power up. So I disassembled it again and just took the part which contained the DC jack (My laptop is like in two parts one contains the power jack which then sits on some pins on the main PCB) to a technician and he said that if you had connected this to a motherboard then it would have burnt cause the soldering was not right. And then I checked with my laptop again by connecting everything the light (the charging light) comes on when I connect the power but it does not switch on. Right now nothing is connected to the laptop; no HD, CD ROM, RAM , Battery. Nothing! Even then it does not power up. Any suggestions?

    Read the article

  • Power supply surges detected during previous power on

    - by Blastcore
    Message is this: "Power supply surges detected during previous power on" "ASUS Auto-Surge was triggered to protect system from unstable power supply" When i went to sleep yesterday and woke up, when i moved the mouse to go back from screen saver, it didn't do anything. So i left it, i came back from class and got this issue. (I didn't restart before going to class... So the screen was left like it was) Today there was a power cut in half of my house. (Computer is on the side that it didn't cut...) Voltages are fine, like always. How do i remove message? It's just maybe sensor glitch? Even disabling the Anti-Surge my PC "shuts down" (Only monitor, but maybe components do too.)

    Read the article

  • Netbook performs hard shutdown without warning on low battery power

    - by Steve Kroon
    My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

    Read the article

  • Reduce power consumption of gaming computer while idle

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

    Read the article

  • UPS and power strip interactions?

    - by chaos
    Sometimes I hear that you shouldn't plug (UPS brand X / any UPS) into (power strip brand X / any power strip) because of some interaction leading to poorly conditioned power, reduced battery life, massive explosions spattering the room with battery acid, and so on. Sometimes I hear that it's the power strip that you shouldn't plug into the UPS. What I haven't gotten is a clear idea of how reliable these recommendations are or how generally/specifically they apply. Can anyone speak precisely and non-urban-legendfully on these UPS and power strip interactions, if there are in fact ones worth thinking about?

    Read the article

  • Turn a Computer Power Supply into a Desktop Power Supply

    - by Jason Fitzpatrick
    If you’re looking for a desktop power supply for your electronics workbench, this tutorial video shows you how to turn a computer PSU into a desktop power supply. In the above video the guys at JumperOneTV show us how to make a desktop power supply. As an addendum to the video; they note in the comments section on the YouTube video that they were wearing gloves for the drilling and that they did a very thorough job cleaning out any loose metal shavings with an air compressor. If you wanted to play it even safer (and you should!) you would remove the circuit board from the enclosure before doing any drilling. Converting an ATX Power Supply to a Lab Bench Power Supply [JumperOneTV via Make] How To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)Learn How to Make HDR Images in Photoshop or GIMP With a Simple Trick

    Read the article

  • Monitor won't enter power save mode

    - by Adam Monsen
    My LCD monitor won't enter power save mode. I've gone into System ? Preferences ? Screensaver, clicked Power Management, then set Put display to sleep when inactive for: to 10 minutes (for both On AC Power and On Battery Power), but the monitor still doesn't enter power save mode, even after an hour. Anyone have ideas on what to try? I'm using Ubuntu 10.04.1 LTS 64-bit desktop on a Dell Latitude E6400 laptop.

    Read the article

  • How to calculate power/energy taken by computer and screen

    - by r0ca
    I need to investigate how much power my linux machine uses per week. I can take a look at the PSU but I would like to know how to calculate the average use of power it takes. I also need to know how much power a CRT screen use per week. Do I need to check the PSU Watt unit and Screen Watt usage and just add both to have the results? P.S. My english is not good, sorry about that! P.P.S. My question is not related to: http://superuser.com/questions/9946/how-to-choose-a-ups-calculate-power-for-a-new-pc

    Read the article

  • Software to measure power draw of HP Server

    - by tombull89
    I'm after some software to measure the power draw of a HP Server, namely a DL360 series. I know Nagios is used for logging and monitering but I'm not sure if it logs power usage as well. I've also tried to find the HP Server Management package but am not sure if this shows power usage either. I'm thinking my best bet would to buy some sort of device that goes inbetween the wall and the servers plug. Can anybody suggest what would do for me?

    Read the article

  • Change power button to 'Ask' in Xubuntu 13.10

    - by Gully.Moy
    I have recently installed Xubuntu 13.10 on my Vaio vpcea making me a Linux beginner. The problem is that laptop's power button is right on the edge of the bezel making it far too easy to press accidentally, in my opinion a design fault by Sony. At present, when I press the power button it shuts down strait away and as you can imagine, when I'm accidentally pressing it all the time it gets very annoying! So I planned to change it to ask what I would like to do when I press it or at least ask if I'm sure. So I went through the xfce GUI options "Settings Manager" - "Power Manager" to the field "When power button is pressed", but it was already set to "Ask". So I did some digging and found a thread telling me to navigate to /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml where it said to find power-button-action and check that value="3". It already did. So I looked some more and found this thread which focuses on acpi scripts. I tried solution 1 & 2 using sudoedit to change the files accordingly (I have made executable bash shell scripts already so I think I followed them correctly), but still no difference. I also found this thread which instructed me to edit /etc/systemd/logind.conf so that HandlePowerKey=ignore. Still no luck. I even tried my own approach to completely disable /etc/acpi/powerbtn.sh by renaming it powerbtn.sh.bak hoping for at least no response from the power button... and I have done many reboots in between... but still it shuts down! I have also read that some people have the file /etc/acpi/events/power_button, but I do not. So does anyone have any other ideas? What else could be executing the shutdown sequence Is there something I'm missing? I haven't undone any of these actions so every one of the above files is currently edited on my computer, with the exception that "Solution 2" automatically undone "Solution 1" above. Thanks guys.

    Read the article

  • Power management on Android -- is app CPU correlated to power usage? [closed]

    - by foampile
    2 questions: Is application CPU usage on Android correlated and how highly to battery usage? In other words, are apps that suck a lot of CPU also draining the battery or not necessarily? Is there a way to itemize and display the phone's power use by application, at any given point in time as well as within defined time buckets and maybe view charts and such? Sort of like a diagnostic monitor for power usage by application or system component? Thanks

    Read the article

  • NVIDIA Tesla K20C in Dell PowerEdge R720xd --- power cables

    - by CptSupermrkt
    I am trying to put an NVIDIA Tesla K20C into a Dell PowerEdge R720xd. I'm having a bit of trouble understanding the power requirements of the card. First, here is a picture of two pages of the same manual, which seems contradictory to me. One page says only a single connector is required, while the next page says both are required. The entire manual for the card can be found here: http://www.nvidia.com/content/PDF/kepler/Tesla-K20-Active-BD-06499-001-v02.pdf Here is an photo taken of the power connections on the card: And here is a photo of where those connectors need to go, onto the PCI-E riser of the r720xd: Neither the R720xd NOR the GPU came with the necessary cables. And given what appears to be a contradiction in the GPU manual (above), I'm not even sure at this point what we actually need. I have searched high and low online for things like 2x6 pin PCI-E to 8 pin male-to-male and so on, and for the life of me cannot find what we need. In case anyone needs it, the owner's manual of the R720xd can be found here: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r720xd_Owner%27s%20Manual_en-us.pdf The relevant page is page 68, which clearly indicates that the 8-pin female port on the riser card is for a GPU. The bottom line question: exactly what power cables do we need to buy, and where can we find them?

    Read the article

  • hp XW8000 work station power supply

    - by user281745
    My power supply went up in the XW8000 and I bought a new corsair cx500. I installed it but when I hook it up and I turn the computer on I get a beeping noise from the computer. I looked at the old power supply and the new power supply. The only difference is that the new power supply has 500 watts and the old one is 450 watts and the old PSU has a brown wire and the new power supply has 2 orange wires at the end. I found out that it is a sense wire that is in a different location so I was wondering how do I fix this problem.

    Read the article

  • Power adapter is not seen in Ubuntu 11.10

    - by Jammanuser
    I have an Alienware M17xR3 laptop running Ubuntu 11.10, and there is an issue with my power adapter when it is plugged in after OS has already loaded (i.e. when I unplug it when at Ubuntu's desktop, and then replug it in again). The problem is Ubuntu thinks its still running on battery power, and that the battery is discharging, and does not recognize my power adapter plugged in. Note that when the power adapter is plugged in when Ubuntu loads up, there is no issue though. It sees the power adapter just fine. So what can be done to solve this problem? Thanks in advance for any help.

    Read the article

  • The Power to Control Power

    - by speakjava
    I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

    Read the article

  • External Monitors shut off when Laptop Lid closes

    - by John Lanz
    I have researched the solution... gconftool-2 --type string --set /apps/gnome-power-manager/buttons/lid_ac "nothing" does not fix it. I have two external monitors and when I close my lid the settings are reset and the laptop's monitor is set to the default. Thanks! gsettings list-recursively org.gnome.settings-daemon.plugins.power org.gnome.settings-daemon.plugins.power active true org.gnome.settings-daemon.plugins.power button-hibernate 'nothing' org.gnome.settings-daemon.plugins.power button-power 'nothing' org.gnome.settings-daemon.plugins.power button-sleep 'nothing' org.gnome.settings-daemon.plugins.power button-suspend 'nothing' org.gnome.settings-daemon.plugins.power critical-battery-action 'suspend' org.gnome.settings-daemon.plugins.power idle-brightness 30 org.gnome.settings-daemon.plugins.power idle-dim-ac false org.gnome.settings-daemon.plugins.power idle-dim-battery true org.gnome.settings-daemon.plugins.power idle-dim-time 10 org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing' org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing' org.gnome.settings-daemon.plugins.power notify-perhaps-recall true org.gnome.settings-daemon.plugins.power percentage-action 2 org.gnome.settings-daemon.plugins.power percentage-critical 3 org.gnome.settings-daemon.plugins.power percentage-low 10 org.gnome.settings-daemon.plugins.power priority 1 org.gnome.settings-daemon.plugins.power sleep-display-ac 600 org.gnome.settings-daemon.plugins.power sleep-display-battery 600 org.gnome.settings-daemon.plugins.power sleep-inactive-ac false org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'suspend' org.gnome.settings-daemon.plugins.power sleep-inactive-battery true org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'suspend' org.gnome.settings-daemon.plugins.power time-action 120 org.gnome.settings-daemon.plugins.power time-critical 300 org.gnome.settings-daemon.plugins.power time-low 1200 org.gnome.settings-daemon.plugins.power use-time-for-policy true

    Read the article

  • Including an embedded framework using a cross-project-reference: Header no such file or directory

    - by d11wtq
    I'm trying to create a Cocoa framework by using a cross-project reference in Xcode. I have 2 projects: one for the framework; one for the application that will use the framework. This framework is not intended to be stored within the system; it is an embedded framework that lives within the application bundle. I have successfully made the cross-project reference, marked the framework as being a dependency of my target, added a Copy Files build phase that puts the framework in Contents/Frameworks/ and added the framework to the linker phase (I checked the little "Target" checkbox; I've also done it manually by dragging the framework into the linker phase). My framework's install directory is correctly set to @executable_path/../Frameworks. However, when I try to build my app it: a) Correctly builds the framework first b) Correctly copies the framework c) Errors because it cannot find the master header file in my framework I have verified that the header is there. I can see it in the app product that is partially built. ls build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework/Headers/Cioccolata.h build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework/Headers/Cioccolata.h I have been able to successfully build the app by copying my framework into /Library/Frameworks (I can then delete it again after the successful build), but this is a workaround, I'm looking to find it out why Xcode doesn't find the framework's master header file without it being copied to a system directory. Is copying it to the app bundle during the build not sufficient? Here's the full build transcript if it's any help (it's just a Hello World app right now, so not much going on here): Build Cioccolata of project Cioccolata with configuration Debug SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/Current A cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf A /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/Current SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Resources Versions/Current/Resources cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Resources /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Resources SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Headers Versions/Current/Headers cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Headers /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Headers SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Cioccolata Versions/Current/Cioccolata cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Cioccolata /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Cioccolata ProcessInfoPlistFile /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/Info.plist Info.plist cd /Users/chris/Projects/Mac/Cioccolata builtin-infoPlistUtility Info.plist -expandbuildsettings -platform macosx -o /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/Info.plist CpHeader build/Debug/Cioccolata.framework/Versions/A/Headers/CWHelloWorld.h CWHelloWorld.h cd /Users/chris/Projects/Mac/Cioccolata /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.h /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Headers CpHeader build/Debug/Cioccolata.framework/Versions/A/Headers/Cioccolata.h Cioccolata.h cd /Users/chris/Projects/Mac/Cioccolata /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/Cioccolata.h /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Headers CopyStringsFile /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/English.lproj/InfoPlist.strings English.lproj/InfoPlist.strings cd /Users/chris/Projects/Mac/Cioccolata setenv ICONV /usr/bin/iconv /Developer/Library/Xcode/Plug-ins/CoreBuildTasks.xcplugin/Contents/Resources/copystrings --validate --inputencoding utf-8 --outputencoding UTF-16 English.lproj/InfoPlist.strings --outdir /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/English.lproj ProcessPCH /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch.gch Cioccolata_Prefix.pch normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/Cioccolata setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c-header -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-generated-files.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-own-target-headers.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-project-headers.hmap -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -I/Users/chris/Projects/Mac/Cioccolata/build/Debug/include -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources -c /Users/chris/Projects/Mac/Cioccolata/Cioccolata_Prefix.pch -o /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch.gch CompileC build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/CWHelloWorld.o /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.m normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/Cioccolata setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-generated-files.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-own-target-headers.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-project-headers.hmap -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -I/Users/chris/Projects/Mac/Cioccolata/build/Debug/include -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources -include /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch -c /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.m -o /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/CWHelloWorld.o Ld /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Cioccolata normal i386 cd /Users/chris/Projects/Mac/Cioccolata setenv MACOSX_DEPLOYMENT_TARGET 10.5 /Developer/usr/bin/gcc-4.2 -arch i386 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/Users/chris/Projects/Mac/Cioccolata/build/Debug -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -filelist /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/Cioccolata.LinkFileList -install_name @executable_path/../Frameworks/Cioccolata.framework/Versions/A/Cioccolata -mmacosx-version-min=10.5 -framework Foundation -single_module -compatibility_version 1 -current_version 1 -o /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Cioccolata Touch /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework cd /Users/chris/Projects/Mac/Cioccolata /usr/bin/touch -c /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework Build CioccolataTest of project CioccolataTest with configuration Debug ProcessInfoPlistFile /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Info.plist Info.plist cd /Users/chris/Projects/Mac/CioccolataTest builtin-infoPlistUtility Info.plist -expandbuildsettings -platform macosx -o /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Info.plist PBXCp build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework cd /Users/chris/Projects/Mac/CioccolataTest /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Frameworks CopyStringsFile /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Resources/English.lproj/InfoPlist.strings English.lproj/InfoPlist.strings cd /Users/chris/Projects/Mac/CioccolataTest setenv ICONV /usr/bin/iconv /Developer/Library/Xcode/Plug-ins/CoreBuildTasks.xcplugin/Contents/Resources/copystrings --validate --inputencoding utf-8 --outputencoding UTF-16 English.lproj/InfoPlist.strings --outdir /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Resources/English.lproj CompileC build/CioccolataTest.build/Debug/CioccolataTest.build/Objects-normal/i386/main.o main.m normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/CioccolataTest setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-generated-files.hmap -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-own-target-headers.hmap -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-project-headers.hmap -F/Users/chris/Projects/Mac/CioccolataTest/build/Debug -I/Users/chris/Projects/Mac/CioccolataTest/build/Debug/include -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/DerivedSources -include /Users/chris/Projects/Mac/CioccolataTest/prefix.pch -c /Users/chris/Projects/Mac/CioccolataTest/main.m -o /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/Objects-normal/i386/main.o In file included from <command-line>:0: /Users/chris/Projects/Mac/CioccolataTest/prefix.pch:13:35: error: Cioccolata/Cioccolata.h: No such file or directory /Users/chris/Projects/Mac/CioccolataTest/main.m: In function 'main': /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: 'CWHelloWorld' undeclared (first use in this function) /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: (Each undeclared identifier is reported only once /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: for each function it appears in.) /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: 'hello' undeclared (first use in this function)

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >