Search Results

Search found 82 results on 4 pages for 'ezekiel rage'.

Page 1/4 | 1 2 3 4  | Next Page >

  • X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

    - by Marcelo Santos
    After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

    Read the article

  • X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

    - by Marcelo Santos
    After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

    Read the article

  • Internet Explorer Rage?

    - by DMin
    I know Internet Explorer is a huge irritating thing for a lot of us - especially IE6. What is the most interesting/extreme thing you've done/fantasized-doing as a result of outrage for (re-)coding for Internet Explorer?

    Read the article

  • Le bataille du chiffrement fait rage pour Google en Inde, les autorités locales demandent à accéder aux données privées de Gmail

    Le bataille du chiffrement fait rage pour Google en Inde, les autorités locales demandent à accéder aux données privées de Gmail Google est en train de passer un mauvais quart d'heure en Inde. Les autorités locales y sont plutôt irritées et cherchent à mettre leur nez partout. Au cours de l'année, elles ont déjà fortement agacé RIM (en tentant d'avoir accès aux données des utilisateurs de BlackBerry avec une deadline au 31 janvier). Le gouvernement du pays demande à obtenir des informations techniques sur le chiffrement mis en oeuvre. Désormais, le Ministère de l'Intérieur local veut étendre ses prérogatives à l'Internet, et demande expressément à Google de lui livrer les informations de chiffrement relatives à son client Gmail ; e...

    Read the article

  • Game: Age of Empires sound good but video "out of range"

    - by Ezekiel
    I'm new to the Ubuntu realm. Currently i'm using Linux Mint 12 with Wine 1.4 and PLAYONLINUX as game loading/playing programs. Video card is MSI GeForce FX5200 (NVIDIA) and is 3d enabled. I can play "Call of Duty 5 demo just fine. My real love is the Age of Empires series games. I loaded the WINE version of AOE 1 demo. No sound and no picture. Black screen with "Out of Range" window in red. I loaded my CD version of AOE 1 through PLAYONLINUX. I get the sound just fine but again the black screen with "Out of Range" window in red. I have used all the monitor settings in both the "settings" and in winecfg. None of the eight monitor options worked in any combination. I have checked all the questions and blogs on this error and tried all I found and no one seems to come up with a real fix. I guess I need to know exactly what the "Out of Range" means. Any help? Anywhere? Thanks

    Read the article

  • How to recover zfs pool when root fs fails

    - by rage
    I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data. How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

    Read the article

  • Ext JS Tab Panel - Dynamic Tabs - Tab Exists Not Working

    - by Joey Ezekiel
    Hi Would appreciate if somebody could help me on this. I have a Tree Panel whose nodes when clicked load a tab into a tab panel. The tabs are loading alright, but my problem is duplication. I need to check if a tab exists before adding it to the tab panel. I cant seem to have this resolved and it is eating my brains. This is pretty simple and I have checked stackoverflow and the EXT JS Forums for solutions but they dont seem to work for me or I'm being blind. This is my code for the tree: var opstree = new Ext.tree.TreePanel({ renderTo: 'opstree', border:false, width: 250, height: 'auto', useArrows: false, animate: true, autoScroll: true, dataUrl: 'libs/tree-data.json', root: { nodeType: 'async', text: 'Tool Actions' }, listeners: { render: function() { this.getRootNode().expand(); } } }) opstree.on('click', function(n){ var sn = this.selModel.selNode || {}; // selNode is null on initial selection renderPage(n.id); }); function renderPage(tabId) { var TabPanel = Ext.getCmp('content-tab-panel'); var tab = TabPanel.getItem(tabId); //Ext.MessageBox.alert('TabGet',tab); if(tab){ TabPanel.setActiveTab(tabId); } else{ TabPanel.add({ title: tabId, html: 'Tab Body ' + (tabId) + '', closable:true }).show(); TabPanel.doLayout(); } } }); and this is the code for the Tab Panel new Ext.TabPanel({ id:'content-tab-panel', region: 'center', deferredRender: false, enableTabScroll:true, activeTab: 0, items: [{ contentEl: 'about', title: 'About the Billing Ops Application', closable: true, autoScroll: true, margins: '0 0 0 0' },{ contentEl: 'welcomescreen', title: 'PBRT Application Home', closable: false, autoScroll: true, margins: '0 0 0 0' }] }) Can somebody please help?

    Read the article

  • BroadcastReceiver not triggered by Alarm

    - by Ezekiel Buchheit
    I am trying to set up an alarm that will run in the background and trigger (eventually) a save event. At the moment I simply have this code attached to a button. Press the button and the alarm should start leaving Toast messages behind as an indication that it is functioning. At the moment everything runs except the onReceive in the BroadcastReceiver is never triggered. Here is my code: The class setting up the alarm: //FIXME - rename (ie BackgroundSave; more descriptive) public class AlarmReceiver extends Service{ //FIXME - make sure you kill the service public void onCreate() { super.onCreate(); Toast.makeText(getApplication().getApplicationContext(), "Service onCreate called", Toast.LENGTH_SHORT).show(); } @Override public int onStartCommand(Intent intent, int flags, int startId) { Toast.makeText(getApplication().getApplicationContext(), "Service started", Toast.LENGTH_SHORT).show(); setAlarm(AlarmReceiver.this); // We want this service to continue running until it is explicitly // stopped, so return sticky. return START_STICKY; } public void setAlarm(Context c) { AlarmManager alarmManager = (AlarmManager)c.getSystemService(Context.ALARM_SERVICE); Intent i = new Intent(c, Alarm.class); PendingIntent pi = PendingIntent.getBroadcast(c, 0, i, 0); alarmManager.setRepeating(AlarmManager.ELAPSED_REALTIME_WAKEUP, System.currentTimeMillis() + 1000, 1000, pi); Toast.makeText(c.getApplicationContext(), "setAlarm called", Toast.LENGTH_SHORT).show(); } public void cancelAlarm(Context context) { Intent intent = new Intent(context, Alarm.class); PendingIntent sender = PendingIntent.getBroadcast(context, 0, intent, 0); AlarmManager alarmManager = (AlarmManager) context.getSystemService(Context.ALARM_SERVICE); alarmManager.cancel(sender); } @Override public IBinder onBind(Intent arg0) { // TODO Auto-generated method stub return null; } } Here is the BroadcastReceiver: public class Alarm extends BroadcastReceiver { @Override public void onReceive(Context context, Intent intent) { Toast.makeText(context, "Alarm", Toast.LENGTH_SHORT).show(); } } And here is my manifest: <!-- Alarm --> <service android:name="com.xxxx.android.tools.AlarmReceiver" android:enabled="true" /> <receiver android:name="com.xxxx.android.tools.Alarm" ></receiver> The alarm onReceive is never triggered.

    Read the article

  • PHP max_execution_time not timing out

    - by Joey Ezekiel
    This is not one of the regular questions if sleep is counted for timeout or stuff like that. Ok, here's the problem: I've set the max_execution_time for PHP as 15 seconds and ideally this should time out when it crosses the set limit, but it doesn't. Apache has been restarted after the change to the php.ini file and an ini_get('max_execution_time') is all fine. Sometimes the script runs for upto 200 seconds which is crazy. I have no database communication whatsoever. All the script does is looking for files on the unix filesystem and in some cases re-directing to another JSP page. There is no sleep() on the script. I calculate the total execution time of the PHP script like this: At the start of the script I set : $_mtime = microtime(); $_mtime = explode(" ",$_mtime); $_mtime = $_mtime[1] + $_mtime[0]; $_gStartTime = $_mtime; and the end time($_gEndTime) is calculated similarly. The total time is calculated in a shutdown function that I've registered: register_shutdown_function('shutdown'); ............. function shutdown() { .............. .............. $_total_time = $_gEndTime - $_gStartTime; .............. switch (connection_status ()) { case CONNECTION_NORMAL: .... break; .... case CONNECTION_TIMEOUT: .... break; ...... } } Note: I cannot use $_SERVER['REQUEST_TIME'] because my PHP version is incompatible. That sucks - I know. 1) Well, my first question obviously is is why is my PHP script executing even after the set timeout limit? 2) Apache has the Timeout directive which is 300 seconds but the PHP binary does not read the Apache config and this should not be a problem. 3) Is there a possibility that something is sending PHP into a sleep mode? 4) Am I calculating the execution time in a wrong way? Is there a better way to do this? I'm stumped at this point. PHP Wizards - please help.

    Read the article

  • Synchronizing DataGridView (DataTable) with the DB

    - by Ezekiel Rage
    Hi! I have the following situation: there is a table in the DB that is queried when the form loads and the retrieved data is filled into a DataGridView via the DataTable underneath. After the data is loaded the user is free to modify the data (add / delete rows, modify entries). The form has 2 buttons: Apply and Refresh. The first one sends the changes to the database, the second one re-reads the data from the DB and erases any changes that have been made by the user. My question is: is this the best way to keep a DataGridView synchronized with the DB (from a users point of view)? For now these are the downsides: the user must keep track of what he is doing and must press the button every while the modifications are lost if the form is closed / app crash / ... I tried sending the changes to the DB on CellEndEdit event but then the user also needs some Undo/Redo functionality and that is ... well ... a different story. So, any suggestions?

    Read the article

  • How can I read JSON file from disk and store to array in Swift

    - by Ezekiel Elin
    I want to read a file from Disk in a swift file. It can be a relative or direct path, that doesn't matter. How can I do that? I've been playing with something like this let classesData = NSData .dataWithContentsOfMappedFile("path/to/classes.json"); And it finds the file (i.e. doesn't return nil) but I don't know how to manipulate and convert to JSON, the data returned. It isn't in a string format and String() isn't working on it.

    Read the article

  • Distinguishing between .NET exception types

    - by Swingline Rage
    For the love of all things holy, how do you distinguish between different "exception flavors" within the predefined .NET exception classes? For example, a piece of code might throw an XmlException under the following conditions: The root element of the document is NULL Invalid chars are in the document The document is too long All of these are thrown as XmlException objects and all of the internal "tell me more about this exception" fields (such as Exception.HResult, Exception.Data, etc.) are usually empty or null. That leaves Exception.Message as the only thing that allows you to distinguish among these exception types, and you can't really depend on it because, you guessed it, the Exception.Message string is glocabilized, and can change when the culture changes. At least that's my read on the documentation. Exception.HResult and Exception.Data are widely ignored across the .NET libraries. They are the red-headed stepchildren of the world's .NET error-handling code. And even assuming they weren't, the HRESULT type is still the worst, downright nastiest error code in the history of error codes. Why we are still looking at HRESULTs in 2010 is beyond me. I mean if you're doing Interop or P/Invoke that's one thing but... HRESULTs have no place in System.Exception. HRESULTs are a wart on the proboscis of System.Exception. But seriously, it means I have to set up a lot of detailed specific error-handling code in order to figure out the same information that should have been passed as part of the exception data. Exceptions are useless if they force you to work like this. What am I doing wrong?

    Read the article

  • How to stop NpgsqlDataReader from blocking?

    - by Swingline Rage
    Running the following code against a large PostgreSQL table, the NpgsqlDataReader object blocks until all data is fetched. NpgsqlCommand cmd = new NpgsqlCommand(strQuery, _conn); NpgsqlDataReader reader = cmd.ExecuteReader(); // <-- takes 30 seconds How can I get it to behave such that it doesn't prefetch all the data? I want to step through the resultset row by row without having it fetch all 15 GB into memory at once. I know there were issues with this sort of thing in Npgsql 1.x but I'm on 2.0. This is against a PostgreSQL 8.3 database on XP/Vista/7. I also don't have any funky "force Npgsql to prefetch" stuff in my connection string. I'm at a complete loss for why this is happening.

    Read the article

  • Embedding/deploying custom font in .NET app

    - by Swingline Rage
    Is there an official way to distribute (deploy) a specific font with a .NET application? We have a (public domain) "LED font" that prints numbers with the retro LED instrumentface look. This is a standard True Type or Open Type font like any other except it looks funky. Obviously for that to work, this font needs to be on the user's machine. But we'd prefer to not force the user to "install our special font into your font folder". We'd prefer to either load a Font object directly from the TTF, or programatically install the font so it's available. How do applications handle this sort of things? Eg, I notice Adobe XYZ installs various fonts on the system without user intervention. That's what we'd like to do. EDIT: okay, ideally, we'd prefer not to install the font directly. We don't want our nifty themed LED font showing up in the user's font dropdown in MS Word. We'd prefer to use this font, but restrict its use or appearance to our app. Any way to do this? Thanks!

    Read the article

  • Making it look like the computer is thinking in TicTacToe game

    - by rage
    here is a slice of code that i've written in VB.net Private Sub L00_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles L00.Click, L01.Click, L02.Click, L03.Click, L10.Click, L11.Click, L12.Click, L13.Click, L20.Click, L21.Click, L22.Click, L23.Click, L30.Click, L31.Click, L32.Click, L33.Click Dim ticTac As Label = CType(sender, Label) Dim strRow As String Dim strCol As String 'Once a move is made, do not allow user to change whether player/computer goes first, because it doesn't make sense to do so since the game has already started. ComputerFirstStripMenuItem.Enabled = False PlayerFirstToolStripMenuItem.Enabled = False 'Check to make sure clicked tile is a valid tile i.e and empty tile. If (ticTac.Text = String.Empty) Then ticTac.Text = "X" ticTac.ForeColor = ColorDialog1.Color ticTac.Tag = 1 'After the player has made his move it becomes the computers turn. computerTurn(sender, e) Else MessageBox.Show("Please pick an empty tile to make next move", "Invalid Move") End If End Sub Private Sub computerTurn(ByVal sender As System.Object, ByVal e As System.EventArgs) Call Randomize() row = Int(4 * Rnd()) col = Int(4 * Rnd()) 'Check to make sure clicked tile is a valid tile i.e and empty tile. If Not ticTacArray(row, col).Tag = 1 And Not ticTacArray(row, col).Tag = 4 Then ticTacArray(row, col).Text = "O" ticTacArray(row, col).ForeColor = ColorDialog2.Color ticTacArray(row, col).Tag = 4 checkIfGameOver(sender, e) Else 'Some good ole pseudo-recursion(doesn't require a base case(s)). computerTurn(sender, e) End If End Sub Everything works smoothly, except i'm trying to make it seem like the computer has to "think" before making its move. So what i've tried to do is place a System.Threading.Sleep() call in different places in the code above. The problem is that instead of making the computer look like its thinking, the program waits and then puts the X and O together at the same time. Can someone help me make it so that the program puts an X wherever i click AND THEN wait before it places an O? Edit: in case any of you are wondering, i realize that the computers AI is ridiculously dumb, but its just to mess around right now. Later on i will implement a serious AI..hopefully.

    Read the article

  • Encoding license file for privacy

    - by Swingline Rage
    Hi, We're using XML Digital Signatures for signing and verifying our license keys. The signing works fine and has been running smoothly. The XML license file contains a few (plaintext) details about the license, along with a binary signature. We'd like to encode (I don't say encrypt) those plaintext details (license duration, user name, etc, etc.) so they're not immediately visible to prying eyes. Is there a standard (eg, base 64 or something else) that people use in this situation? It doesn't need to be secure or particularly clever, just enough to conceal the information in Notepad. Thanks : )

    Read the article

  • How can I tell when a MySQL table was last updated?

    - by RaGE
    In the footer of my page, I would like to add something like "last updated the xx/xx/200x"; with this date being the last time a certain mySQL table has been updated. What is the best way to do that ? Is there a function to retrieve the date ? Should I make an access to the database everytime my footer is displayed ?

    Read the article

  • Install lubuntu 12.04 on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

    Read the article

  • Mass renaming, *nix version

    - by Paolo B.
    I was looking for a way to rename a huge number of similarly-named files, much like this one (a Windows-related question) except that I'm using *nix (Ubuntu and FreeBSD, separately). Just to sum up, while using the shell (Bash, CSH, etc.) how do I mass-rename a number of files such that, for example, the following files: Beethoven - Fur Elise.mp3 Beethoven - Moonlight Sonata.mp3 Beethoven - Ode to Joy.mp3 Beethoven - Rage Over the Lost Penny.mp3 will be renamed like these? Fur Elise.mp3 Moonlight Sonata.mp3 Ode to Joy.mp3 Rage Over the Lost Penny.mp3 The reason I want to do this is that these collection of files will go under a directory named "Beethoven" (i.e. the filenames' prefix), and having this information on the filename itself will be redundant.

    Read the article

  • Install lubuntu on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. So I tryied the old xorg way to edit the missing resolution: Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... Anyone can help me and tell me how to reconfigure X with the terminal? Can anyone give me a hand?

    Read the article

  • Here Comes the FY11 Earmarks Database

    - by Mike C
    I'm really interested in politics (don't worry, I'm not going to start bashing politicians and hammering you with political rage). The point is when the U.S. FY11 Omnibus Spending Bill (the bill to fund the U.S. Government for another year) was announced it piqued my interest. I'm fascinated by " earmarks " (also affectionally known as " pork "). For those who aren't familiar with U.S. politics, "earmark" is a slang term for "Congressionally Directed Spending". It's basically the set of provisions...(read more)

    Read the article

  • Le code source du moteur derrière Doom 3 est disponible ! id Software publie l'id Tech 4 sous licence GPLv3

    id Software publie les sources de l'ID Tech 4 sous licence GPLv3 Le code source du moteur derrière Doom 3 est disponible ! Il y a quelques mois, Id Software a commercialisé le jeu Rage utilisant la nouvelle version de l'Id Tech. Le studio de développement a pour habitude de libérer la version précédente de son moteur, lorsque le dernier est disponible. Ainsi, aujourd'hui, nous avons accès à la quatrième version de ce fabuleux moteur, ici. Pour rappel, cette version est à l'origine des jeux : Doom 3 Quake IV Prey Enemy Territory : Quake Wars Wolfenstein Brink

    Read the article

  • Android Market : Google supprime 21 applications populaires infectées de malwares et lance leur désinstallation à distance

    Android Market : Google supprime 21 applications populaires infectées Par des malwares et lance leur désinstallation à distance Google vient de bannir de l'Android Market pas moins de 21 applications populaires, en raison de nombreux Malwares et Trojans qu'elles contiennent. Ces applications appartiennent au même développeur (Myournet) et intègrent toutes l'exploit nommé « rage-against-the-cage », qui permet au code malicieux d'obtenir le droit d'administrateur principal (root) sur les versions d'Android antérieures à la 2.2.2. Ce droit acquis, les applications étaient en mesure de télécharger et d'exécuter du code via des portes dérobées, ouvrant ainsi la voie à de...

    Read the article

1 2 3 4  | Next Page >