Search Results

Search found 86 results on 4 pages for 'fabian gradolph'.

Page 1/4 | 1 2 3 4  | Next Page >

  • ASUS X401A ubuntu installation

    - by fabian
    I tried to install ubuntu in my laptop ASUSX401A. I removed windows in the partition tablea at the installation. All ok up to here, however when I reboot the HD after finish the installation, the HD was not recognized, in the bios not appeared the HD the only option was the realtek card, then was impossible to enter to ubuntu. After that I tried again to install ubuntu but now I have a error in the input/output when I wanted the enter the table partion. I appreciate any help Fabian

    Read the article

  • Very unusual and weird problem with gVim 7.2

    - by Fabian
    After installing gVim and running gvim from the run window, if I were to type :cd followed by a tab, I will get \AppData, \Application Data, etc. Which basically means I'm at my $HOME directory (C:\Users\Fabian). The weird thing is I do not have a \Application Data folder there. But if I were to run gvim.exe from its installation folder, and I type :cd followed by tab, I would get \autoload, \colors, etc. which means I'm at the installation folder. And if I were to pin gvim.exe on to taskbar, upon launch and typing :cd then tab, I will get \Dictionaries and upon hitting tab again I get a beep. I think for the last scenario, I'm at some Adobe folder. Anybody knows how to fix this weird issue? I'd like to pin it to taskbar and upon launch, start in the $HOME directory (C:\Users\Fabian).

    Read the article

  • Un balance del XXI Congreso de la Comunidad de Usuarios de Oracle

    - by Fabian Gradolph
    La XXI edición del Congreso de CUORE (Comunidad de Usuarios de Oracle) se clausuró el miércoles pasado tras dos intensos días de conferencias, talleres, reuniones y mesas redondas. Los más de 600 asistentes son una buena muestra del gran interés que despiertan las propuestas tecnológicas de Oracle entre nuestros clientes. Big Data y el sector utilities fueron dos de los grandes protagonistas del Congreso. El evento fue inaugurado por Félix del Barrio (en la segunda foto por la izquierda), director general de Oracle en España. Una buena parte del evento, la mañana del martes, estuvo dedicada a Big Data. Con Andrew Sutherland, Vicepresidente Senior de Tecnología de Oracle en EMEA, haciendo la presentación principal, para dar paso después a sesiones específicas sobre las tecnologías necesarias en las diferentes fases de los proyectos Big Data (obtener los datos, organizarlos, analizarlos y, finalmente, tomar las decisiones de negocio correspondientes). No nos vamos a entretener explicando qué es Big Data, un tema que ya hemos tratado previamente en este blog (aquí y aquí), pero sí hay que llamar la atención sobre un tema que Andrew Sutherland puso sobre la mesa en una reunión con periodistas: los proyectos relacionados con los Big Data tienen sentido pleno si nos sirven para modificar procesos y modelos de negocio, de forma que incrementemos la eficacia de la organización. Si nuestra organización está basada en procesos rígidos e inmutables (lo que tiene que ver esencialmente con el tipo de aplicaciones que estén implementadas), el aprovechamiento de los Big Data será limitado. En otras palabras, Big Data es un impulsor del cambio en las organizaciones. Normal 0 21 false false false ES X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Los retos a los que se enfrenta un sector como el energético ocuparon el segundo día del Congreso. Las tendencias de la industria como las Redes Inteligentes, el Smart Metering, la entrada de nuevos actores y distribuidores en el mercado, la atomización de las operadoras y las inversiones congeladas son el panorama que se dibuja para las compañías del sector utilities . Además de los grandes eventos (Big Data y Oracle Utilities Day), las dos jornadas del Congreso sirvieron para que aquellos partners de Oracle que lo desearan recibieran la certificación gratuita de sus profesionales en diversas jornadas de examen. Adicionalmente, se desarrollaron sesiones paralelas sobre tecnologías y visiones estratégicas, demostraciones de producto y casos de éxito. En resumen, el balance del XXI Congreso de CUORE es muy positivo para Oracle, para nuestros clientes y para nuestros partners. Os esperamos a todos el próximo año.

    Read the article

  • Mejores prácticas de Recursos Humanos: Cross Company Mentoring

    - by Fabian Gradolph
    Una de las cosas positivas de trabajar en una gran organización como Oracle es la posibilidad de participar en iniciativas de gran alcance que normalmente no están disponibles en muchas empresas. Ayer se presentó, junto con American Express y CocaCola, la tercera edición del programa Cross Company Mentoring, una iniciativa en la que las tres empresas colaboran facilitando mentores (profesionales experimentados) para promover el desarrollo profesional de individuos de talento en las tres empresas. La originalidad del programa estriba en que los mentores colaboran con el desarrollo de los profesionales de las otras empresas participantes y no sólo con los propios. La presentación inicial fue realizada por Alfredo García-Valverde, presidente de American Express en España. Posteriormente, Julia B. López, de American Express, y Rosa María Arias, de Oracle (en ese orden en la foto), han detallado en qué consiste la iniciativa, además de hacer balance de la edición anterior. Aunque este programa -complementario de los que ya funcionan en las tres empresas- está disponible para hombres y mujeres, hay que destacar que buena parte de su razón de ser está en potenciar el papel de mujeres profesionales de talento en las compañías. En términos generales, todas las grandes organizaciones se encuentran con un problema similar en el desarrollo del talento femenino. Independientemente del número de mujeres que formen parte de la plantilla de la empresa, lo cierto es que su número decrece de forma drástica cuando hablamos de los puestos directivos. La ruptura de ese "techo de cristal" es una prioridad para las empresas, tanto por motivos de simple justicia social, como por aprovechar al máximo todo el potencial del talento que ya existe dentro de las organizaciones, evitando que el talento femenino se "pierda" por no poder facilitar las oportunidades adecuadas para su desarrollo. La iniciativa de Cross Company Mentoring tiene unos objetivos bien definidos. En primer lugar, desarrollar el talento con un método innovador que permite conocer las mejores prácticas en otras empresas y aprovechar el talento externo. Adicionalmente, como ha señalado Julia López, es un método que nos fuerza a salir de la zona de confort, de las prácticas tradicionalmente aceptadas dentro de cada organización y que difícilmente se ponen en cuestión. El segundo objetivo es que el Mentee, el máximo beneficiario del programa, aprenda de la experiencia de profesionales de gran trayectoria para desarrollar sus propias soluciones en los retos que le plantee su carrera profesional. El programa que se ha presentado ahora, la tercera edición, arrancará en el próximo mes y estará vigente hasta finales de año. Seguro que tendrá tanto éxito como en las dos ediciones anteriores.

    Read the article

  • Oracle OpenWorld 2012. Rueda de prensa de Mark Hurd: pilares de la estrategia de Oracle

    - by Fabian Gradolph
    Estamos en la segunda jornada de OpenWorld 2012. La sesión ha comenzado con la presentación de Mark Hurd, quien después de su intervención, ha ofrecido una rueda de prensa multitudinaria. Es probable que más de 80 o 90 periodistas estuviesen presentes en la sala. El presidente de Oracle nos ha presentado una muy buena síntesis sobre la estrategia de la compañía, que básicamente está basada en cuatro pilares. He aquí un breve resumen: 1. Ofrecer los mejores productos y soluciones en cada una de las capas tecnológicas. Es decir, los mejores productos de almacenamiento de información, los mejores servidores, la mejor base de datos… todos ellos basados en estándares de la industria, lo que favorece la interoperabilidad con los productos de otros fabricantes, si esa es la elección del cliente. 2. Integrar los productos desde la fase de diseño y desarrollo para ofrecer a los clientes soluciones que proporcionen un rendimiento extremo. Los mayores exponentes de esta estrategia son los Engineered Systems (sistemas de ingeniería conjunta), que incluyen productos estrella como Exadata, Exalogic, o Exalitycs. Al combinar las mejores capacidades de los productos Oracle e integrarlos verticalmente, se consiguen los siguientes beneficios. Rendimiento extremo de las soluciones tecnológicas. Por ejemplo, la última versión de Exadata, presentada ahora, ofrece una velocidad hasta 100 veces mayor que la anterior. Reducción de costes. Los sistemas integrados permiten reducir la necesidad de espacio, el tiempo de instalación e integración y los costes de mantenimiento. Su mayor rendimiento también se traduce en una menor necesidad de inversión en infraestructura. Simplificación de la gestión y el mantenimiento. Al integrar diferentes tipos de soluciones en una sola, también se simplifica la contratación de sistemas de soporte, centralizándolos en un único proveedor. 3. 3. Una propuesta completa para entornos cloud. La propuesta de Oracle incluye una cloud pública (Oracle Public Cloud), infraestructura para clouds privadas e infraestructura para sistemas híbridos. Así, la compañía ofrece Aplicaciones como Servicio (AaaS), Plataforma como servicio (PaaS) e infraestructura como servicio (IaaS). Al mismo tiempo, facilita soluciones para que las empresas construyan sus propias infraestructuras cloud. La ventaja de la propuesta de Oracle es que se utiliza la misma tecnología para la cloud pública o la privada, de forma que los clientes tengan facilidad para escoger qué aplicaciones mantendrán en un sistema público, cuáles en un sistema privado, etc. La máxima interoperabilidad permite, además, trasnferir aplicaciones de unas modalidades a otras sin problemas. 4. Aplicaciones sectoriales. Oracle está apostando fuertemente por el desarrollo de aplicaciones específicas para los diferentes sectores de actividad. Así, Oracle proporciona soluciones concretas para Banca y Finanzas, Distribución, Logística, Sector Público, Telecomunicaciones y un largo etcétera. Tras sus palabras preliminares hubo una interesante ronda de preguntas. No es posible hacer un resumen de todas ellas, pero me quedo con un mensaje que Mark ha repetido en un par de ocasiones: Oracle quiere seguir creciendo en todos los mercados en los que opera y se trata de una estrategia para crecer. Así lo esperamos todos.

    Read the article

  • Motores tecnológicos para el crecimiento económico

    - by Fabian Gradolph
    Oracle ha participado hoy en el IV Curso de Verano AMETIC-UPM. La presentación a corrido a cargo de José Manuel Peláez, director de Preventa de Tecnología de Oracle Ibérica, quien ha hecho una completa revisión de cuáles son los impulsores actuales de la innvovación y del desarrollo en el entorno de las tecnologías, haciendo honor al título del curso:  Las TIC en el nuevo entorno socio-económico: Motores de la recuperación económica y el empleo. Peláez, en su presentación "De la tecnología a la innovación: impulsores de la actividad económica",  ha comenzado destacando la importancia estratégica que hoy en día tienen las tecnologías para cualquier modelo de negocio. No se trata ya de hacer frente a la crisis económica, que también, sino sobre todo de hacer frente a los desafíos presentes y futuros de las empresas. En este sentido, es esencial hacer frente a un reto: el alto coste que tiene para las organizaciones la complejidad de sus sistemas tecnológicos. Hay un ejemplo que Oracle utiliza con frecuencia. Si un coche se comprase del mismo modo en que las empresas adquieren los sistemas de información, compraríamos por un lado la carrocería, por otro lado el motor, las ventanas, el cambio de marchas, etc... y luego pasaríamos un tiempo muy interesante montándolo todo en casa. La pregunta clave es: ¿por qué no adquirir los sistemas de información ya preparados para funcionar, al igual que compramos un coche?. El sector TI, con Oracle a la cabeza, está dando uina respuesta adecuada con los sistemas de ingenería conjunta. Se trata de sistemas de hardware y software diseñados y concebidos de forma integrada que reducen considerablemente el tiempo necesario para la implementación, los costes de integración y los costes de energía y mantenimiento. La clave de esta forma de adquirir la tecnología, según ha explicado Peláez, es que al reducir la complejidad y los costes asociados, se están liberando recursos que pueden dedicarse a otras necesidades. Según los datos de Gartner, de la cantidad de recursos invertidos por las empresas en TI, el 63% se dedica a tareas de puro funcionamiento, es decir, a mantener el negocio en marcha. La parte de presupuesto que se dedica a crecimiento del negocio es el 21%, mientras que sólo un 16% se dedica a transformación, es decir, a innovación. Sólo mediante la utilización de tecnologías más eficientes -como los sistemas de ingeniería conjunta-, que lleven aparejados menores costes, es viable reducir ese 63% y dedicar más recursos al crecimiento y la innovación. Ahora bien, una vez liberados los recursos económicos, ¿hacia dónde habría que dirigir las inversiones en tecnología?. José Manuel Peláez ha destacado algunas áreas esenciales como son Big Data, Cloud Computing, los retos de la movilidad y la necesidad de mejorar la experiencia de los clientes, entre otros. Cada uno de estos aspectos lleva aparejados nuevos retos empresariales, pero sólo las empresas que sean capaces de integrarlos en su ADN e incorporarlos al corazón de su estrategia de negocio, podrán diferenciarse en el panorama competitivo del siglo XXI. Desde estas páginas los iremos desgranando poco a poco.

    Read the article

  • Sector bancario, un reto de transformación tecnológica

    - by Fabian Gradolph
    El sector financiero se encuentra en un momento clave. No sólo por la coyuntura económica actual, sino también por cuestiones estructurales y normativas que obligan a las entidades bancarias -normalmente a la cabeza de la innovación tecnológica, por cierto- a seguir dando pasos hacia el futuro, manteniendo la tecnología en el corazón de su estrategia de negocio. Así se ha puesto de manifiesto en el encuentro que se ha celebrado hoy en Madrid: Oracle in Banking, donde expertos de Oracle, clientes de la compañía y analistas han puesto sobre la mesa algunos de los desafíos a los que se enfrenta el sector e ideas para aprovechar al máximo la tecnología en la resolución de estos desafíos. El evento ha sido todo un éxito, con asistencia masiva de clientes y partners. En la imagen que ilustra este artículo pueden verse, por este orden: una panorámica de la sala, Modesto Villajos, Regional Sales Manager de Oracle, quien ejerció de maestro de ceremonias. Leopoldo Boado, Country Manager de Oracle España, quien realizó la introducción, Alex Kwiatkowski, de IDC, quien expuso los prinicipales desafíos a los que se enfrenta la banca, y Máximo Díez, Senior Director Financial Services de Oracle, que planteó las diferentes estrategias de transformación que pueden emprender los bancos. El evento se completó con intervenciones de clientes de Oracle (Banco Espírito Santo -BES- de Portugal; y BBVA, de España), y presentaciones y demostraciones técnicas.  De particular interés fue la intervención de Alex Kwiatkowski. De acuerdo con su punto de vista hay cuatro áreas esenciales a las que se enfrenta el sector. La primera de ellas es el marco regulatorio. El sector financiero está sometido a una constante presión normativa (probablemente acrecentada en estos tiempos de incertidumbre), no sólo a nivel nacional, sino también a nivel europeo y global. El cumplimiento exquisito de todas estas normas es esencial para el buen funcionamiento del sistema. La segunda área crítica es la necesidad de ofrecer una experiencia de usuario multicanal satisfactoria, de forma que se potencie la retención de clientes. A veces es difícil darnos cuenta, pero hoy en día nuestras interacciones con el banco han alcanzado una gran diversidad de canales (sucursal, ATM, Internet, banca telefónica, banca móvil...). Esto supone un permanente desafío tecnológico y de procesos para las entidades financieras. El tercer elemento crítico es el del incremento de la eficiencia de las operaciones, manteniendo los costes bajo control o incluso reduciéndolos aún más. Por último, las entidades bancarias tienen ante sí el reto de encontrar nuevas fuentes de ingresos, de forma que el foco deje de estar únicamente en la reducción de costes y la minimización de riesgos. Lo cierto es que en la actualidad, la atención principal se centra en estos dos puntos, pero como mencionó Alex Kwiatkowski "los CIO`s de los bancos se van a plantar en la mesa del CEO con la necesidad de realizar renovaciones completas de los sistemas de core banking y la necesidad de invertir en el desarrollo de nuevos canales". Máximo Díez también enfatizó esta necesidad en su presentación. Los bancos tienen la obligación de econtrar nuevas fórmulas para impulsar el crecimiento, pero la implementación de estrategias en este sentido presenta fuertes desafíos a causa de las limitaciones de los sistemas IT existentes. No hay duda de que se presenta un futuro muy interesante en el ámbito tecnológico para el sector financiero. Lo que Oracle puede hacer y ofrece a las entidades financieras puede encontrarse en este enlace: Financial Services.

    Read the article

  • Linq, double left join and double count

    - by Fabian Vilers
    Hi! I'm looking to translate this SQL statement to a well working & performant LINQ command. I've managed to have the first count working using the grouping count and key members, but don't know how to get the second count. select main.title, count(details.id) as details, count(messages.id) as messages from main left outer join details on main.id = details.mainid left outer join messages on details.id = messages.detailid group by main.title Any advice is welcome! Fabian

    Read the article

  • Programmatically submit a form

    - by Fabian Vilers
    Hi all, I've seen a tons of sample to how to programmatically submit a form (in .NET) but none of them has the specific requirements I need. The case I'm working on has a query string (http://.../index=?p=update), some hidden fields and a upload file. Does anyone has managed to submit this kind of form with a webrequest? Thanks a lot in advance, Fabian

    Read the article

  • Windows server 2008R2 routing with single NIC

    - by Fabian
    I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

    Read the article

  • Windows server 2008R2 routing with single NIC

    - by Fabian
    I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

    Read the article

  • BI Publisher at OpenWorld 2012

    - by mdonohue
    For those going to OpenWorld, hope you can join us for any of the following Sessions, Hands On Labs or just stop by and visit us in the DEMOgrounds: Moscone South S-262 Oracle Business Intelligence Publisher Overview, What’s New, and What’s Planned Monday, 1-Oct 13:45 - 14:45Moscone South - 305Mike Donohue - Oraclewith Ed Farler - CSC Oracle Business Intelligence Publisher: Reporting for Oracle Applications Wednesday, 3-Oct 11:45 - 12:45Palace Hotel - RoseMike Donohue - OracleNote: new room to accommodate everyone who pre-registered Oracle Business Intelligence Publisher Best Practices: Be a Reporting Superstar Wednesday, 3-Oct 15:30 - 16:30Moscone South - 305Nikos Psomas & Klaus Fabian - Oracle Two sessions of the Hands on Lab:  Building Reports and Data Models in Oracle Business Intelligence Publisher Tuesday 2-Oct 17:00 - 18:00andThursday 4-Oct 11:15 - 12:15Marriott Marquis - Salon 5/6Nikos Psomas, Klaus Fabian & Kasturi Shekar -- Oracle You can also download the Focus on BI Publisher sheet that lists all Publisher related Sessions, Labs and DEMOground stations. Hope to see you there.

    Read the article

  • Get data to android app from mysql server

    - by Fabian
    Hi i have an mysql database with some sports results in it. I want to write an android application to display these data on mobile phones. I´ve searched on the internet for this issue and i think it is not possible to have a direct connection between the mysql database and the android application. (Is this right?) So my question is the following: How can i have access in the android application to the mysql database in order to display some of the data? Thank you for your answers! Fabian

    Read the article

  • VS 2010 web.config transformation

    - by Fabian Vilers
    Hi all, I need help on web.config transformation as I'm trying to do something not documented. My web.config has an empty connectionStrings element. In debug, I'd like the transformation tool to add a configSource="file.local" to the connectionStrings element. But in release, I'd like it to add a connectionString element. So, to summarize, I have <connectionStings> </connectionStings> And I need to transform it to <connectionStings configSource="file.local"> </connectionStings> And to: <connectionStings> <clear/> <add name="Abc" connectionSting="bla bla bla" provider="xxx" /> </connectionStings> Anybody has done this yet? Thanks in advance, Fabian

    Read the article

  • debug jquery selector

    - by Fabian
    Hi, I am looking for a way to debug what a jquery selector returns/selected. I tried to use toString() but that only returns [object Object]. What I am actually trying to do is to attach a callback to radio buttons. And on click on one of the buttons I want to submit the enclosing form. Therefore I try to do something like this: $(".rating").stars({ cancelShow: false, callback: function(ui, type, value, event) { $(this).closest('form').ajaxSubmit(); } }); But unfortunately just nothing happens. Thanks a lot, Fabian

    Read the article

  • Where does Visual Studio stores the default browser to use in debug?

    - by Fabian Vilers
    Hi all, I'm using Firefox as my default browser but when working in Visual Studio, I'd like to fire up IE when I go in debug. We all know that in MVC application, there's no way to choose the default browser unless you add a web form file, right click it, select browse with and then force a browser to be the default one. Great. My simple question is: where does VS stores the browser I just tell him to use (registry? project file? some xml config file?) I'm asking because VS loose this preference several times a month. I'm fed up with making the brower trick again and again. Thanks in advance, Fabian

    Read the article

  • HTML & CSS Horizontal menu with items on left & right

    - by Fabian Vilers
    Hi all, I'm building an horizontal menu in html+css. The current result is fine, except I want to have some items on the left, and others on the right. I couldn't find usefull result on Google with such common keywords so I'm asking on SO. Here's my code so far: #menu { background-color: #383838; height: 65px; margin-bottom: 20px; } #menu ul li { float: left; } <div id="menu"> <ul> <li>Link 1</li> <li>Link 2</li> <li>Link 3</li> </ul> </div> I'd like to have Link 3 on the right, so the space between link 2 and 3 should be filled at maximum. I don't want a filler <li> tag, but instead apply a class to the last <li> on the left, or the first <li> on the right. Don't want to adjust the width as I've a :hover background color changing effet on the links. I suppose margin or padding should do the trick but I can't manage to find how. Any clue? Thanks in advance, Fabian

    Read the article

  • Are there any font rendering libraries for games development that support hinting?

    - by Richard Fabian
    I've used angel code's bitmap font generator quite a bit and though it's very good, I wondered if there would be a way of using the hinting information to provide a better readable result by using hinting to provide differing thickness based on size/pixel coverage. I imagine any solution would have to use the distance field tech presented in the valve paper on smoothing fonts while maintaining or reducing asset size. (http://www.gamedev.net/community/forums/topic.asp?topic_id=494612) but I haven't found any demos of it being used with hinting information turned on or included in the field gradients in any way. Another way of looking at this is whether there are any font bitmap generators that will output mipmaps that still maintain their readability in the face of pixel size. I think the lower mip levels would try to guarantee fill and space where it is necessary to maintain readability/topology over maintaining style/form (the point of hinting). In response to "Is there a reason you can't just render the size you want", the problem lies in the fact that font rasterisers currently don't render in 3D, and hinting information would be important in different amounts due to the pixel density being different along different axes, even differing in importance along the length of a string due to the size reducing over distance. For example, I only want horizontal hinting in a texture that is viewed from the side, and only really want vertical hinting in a font that is viewed from below or above. This isn't meant to be a renderer that tries to render a perfect outline as accurately as possible, as hinting distorts the reality of the font, instead this is meant to be a rendering solution for quite static scenes, but scenes that have 3D transformed and warped text layout. In this case the legibility is important, more important than the accuracy of representation of the polygon shape.

    Read the article

  • Repeat row headers after Page Break

    - by klaus.fabian
    The lead developer of the FO engine send me by chance an email about a REALLY nice feature I did not know about. Did you ever encounter a long table with merged cells, where the merged cell went on to the next page? While column headers are by default repeated on the next page, row headers are not. Tables with group-left column and pivot tables are prime examples where this problem occurs. I have seen reports where merged cells could go over multiple pages and you would need to back to find the row header on previous pages. The BI Publisher RTF templates have a special tag you can added to a merged cell to repeat the contents after each page break. You just need to add the following (wordy) tag to the next merged table cell: true Example: 2nd page of report before adding the tag 2nd page of report after adding the tag. Thought you might want to know. Klaus

    Read the article

  • What does your Python development workbench look like?

    - by Fabian Fagerholm
    First, a scene-setter to this question: Several questions on this site have to do with selection and comparison of Python IDEs. (The top one currently is What IDE to use for Python). In the answers you can see that many Python programmers use simple text editors, many use sophisticated text editors, and many use a variety of what I would call "actual" integrated development environments – a single program in which all development is done: managing project files, interfacing with a version control system, writing code, refactoring code, making build configurations, writing and executing tests, "drawing" GUIs, and so on. Through its GUI, an IDE supports different kinds of workflows to accomplish different tasks during the journey of writing a program or making changes to an existing one. The exact features vary, but a good IDE has sensible workflows and automates things to let the programmer concentrate on the creative parts of writing software. The non-IDE way of writing large programs relies on a collection of tools that are typically single-purpose; they do "one thing well" as per the Unix philosophy. This "non-integrated development environment" can be thought of as a workbench, supported by the OS and generic interaction through a text or graphical shell. The programmer creates workflows in their mind (or in a wiki?), automates parts and builds a personal workbench, often gradually and as experience accumulates. The learning curve is often steeper than with an IDE, but those who have taken the time to do this can often claim deeper understanding of their tools. (Whether they are better programmers is not part of this question.) With advanced editor-platforms like Emacs, the pieces can be integrated into a whole, while with simpler editors like gedit or TextMate, the shell/terminal is typically the "command center" to drive the workbench. Sometimes people extend an existing IDE to suit their needs. What does your Python development workbench look like? What workflows have you developed and how do they work? For the first question, please give the main "driving" program – the one that you use to control the rest (Emacs, shell, etc.) the "small tools" -- the programs you reach for when doing different tasks For the second question, please describe what the goal of the workflow is (eg. "set up a new project" or "doing initial code design" or "adding a feature" or "executing tests") what steps are in the workflow and what commands you run for each step (eg. in the shell or in Emacs) Also, please describe the context of your work: do you write small one-off scripts, do you do web development (with what framework?), do you write data-munching applications (what kind of data and for what purpose), do you do scientific computing, desktop apps, or something else? Note: A good answer addresses the perspectives above – it doesn't just list a bunch of tools. It will typically be a long answer, not a short one, and will take some thinking to produce; maybe even observing yourself working.

    Read the article

  • Procedural landscape generation but not just fractals

    - by Richard Fabian
    In large procedural landscape games, the land seems dull, but that's probably because the real world is largely dull, with only limited places where the scenery is dramatic or tactical. Looking at world generation from this point of view, a landscape generator for a game needs to not follow the rules of landscaping, but instead some rules married to the expectations of the gamer. For example, there could be a choke point / route generator that creates hills ravines, rivers and mountains between cities, rather than cities plotted on the land based on the resources or conditions generated by the mountains and rainfall patterns. Is there any existing work being done like this? Start with cities or population centres and then add in terrain afterwards?

    Read the article

  • Python or C server hosting for indie development

    - by Richard Fabian
    I've written a lot of the game, but it's singleplayer. Now we want to join up and play together. I want to host it like an MMO, but haven't got any personal ability to host (no static IPs or direct access to a reasonable router that will allow me to port forward) so I wondered if there were any free / very cheap hosting solutions for people developing games that need to develop their MMO side. In my case it's a world server for a 2D game where the world map can be changed by the players. So, GAE sounds expensive, as there would be quite a few updates per second (I heard they bill for data updates but not for download, but can't find refernce to billing anywhere on the FAQs) I'd prefer to be able to write the server in python as that's what the game is written in (with pygame), but C is fine, and maybe even better as it might prompt me to write some more performant world generator code ;)

    Read the article

  • XNA and C# vs the 360's in order processor

    - by Richard Fabian
    Having read this rant, I feel that they're probably right (seeing as the Xenon and the CELL BE are both highly sensitive to branchy and cache ignorant code), but I've heard that people are making games fine with C# too. So, is it true that it's impossible to do anything professional with XNA, or was the poster just missing what makes XNA the killer API for game development? By professional, I don't mean in the sense that you can make money from it, but more in the sense that the more professional games have phsyics models and animation systems that seem outside the reach of a language with such definite barriers to the intrinsics. If I wanted to write a collision system or fluid dynamics engine for my game, I don't feel like C# offers me the chance to do that as the runtime code generator and the lack of intrinsics gets in the way of performance. However, many people seem to be fine working within these constraints, making their successful games but seemingly avoiding any of the problems by omission. I've not noticed any XNA games do anything complex other than what's already provided by the libraries, or handled by shaders. Is this avoidance of the more complex game dynamics because of teh limitations of C#, or just people concentrating on getting it done? In all honesty, I can't believe that AI war can maintain that many units of AI without some data oriented approach, or some dirty C# hacks to make it run better than the standard approach, and I guess that's partly my question too, how have people hacked C# so it's able to do what games coders do naturally with C++?

    Read the article

  • Compute directional light frustum from view furstum points and light direction

    - by Fabian
    I'm working on a friends engine project and my task is to construct a new frustum from the light direction that overlaps the view frustum and possible shadow casters. The project already has a function that creates a frustum for this but its way to big and includes way to many casters (shadows) which can't be seen in the view frustum. Now the only parameter of this function are the normalized light direction vector and a view class which lets me extract the 8 view frustum points in world space. I don't have any additional infos about the scene. I have read some of the related Questions here but non seem to fit very well to my problem as they often just point to cascaded shadow maps. Sadly i can't use DX or openGl functions directly because this engine has a dedicated math library. From what i've read so far the steps are: Transform view frustum points into light space and find min/max x and y values (or sometimes minima and maxima of all three axis) and create a AABB using the min/max vectors. But what comes after this step? How do i transform this new AABB back to world space? What i've done so far: CVector3 Points[8], MinLight = CVector3(FLT_MAX), MaxLight = CVector3(FLT_MAX); for(int i = 0; i<8;++i){ Points[i] = Points[i] * WorldToShadowMapMatrix; MinLight = Math::Min(Points[i],MinLight); MaxLight = Math::Max(Points[i],MaxLight); } AABox box(MinLight,MaxLight); I don't think this is the right way to do it. The near plain probably has to extend into the direction of the light source to include potentional shadow casters. I've read the Microsoft article about cascaded shadow maps http://msdn.microsoft.com/en-us/library/windows/desktop/ee416307%28v=vs.85%29.aspx which also includes some sample code. But they seem to use the scenes AABB to determine the near and far plane which I can't since i cant access this information from the funtion I'm working in. Could you guys please link some example code which shows the calculation of such frustum? Thanks in advance! Additional questio: is there a way to construct a WorldToFrustum matrix that represents the above transformation?

    Read the article

  • Procedural world generation oriented on gameplay features

    - by Richard Fabian
    In large procedural landscape games, the land seems dull, but that's probably because the real world is largely dull, with only limited places where the scenery is dramatic or tactical. Looking at world generation from this point of view, a landscape generator for a game needs to not follow the rules of landscaping, but instead some rules married to the expectations of the gamer. For example, there could be a choke point / route generator that creates hills ravines, rivers and mountains between cities, rather than cities plotted on the land based on the resources or conditions generated by the mountains and rainfall patterns. Is there any existing work being done like this? Start with cities or population centres and then add in terrain afterwards?

    Read the article

1 2 3 4  | Next Page >