Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 1/656 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • The Best Free Tools for Creating a Bootable Windows or Linux USB Drive

    - by Lori Kaufman
    If you need to install Windows or Linux and you don’t have access to a CD/DVD drive, a bootable USB drive is the solution. You can boot to the USB drive, using it to run the OS setup program, just like a CD or DVD. We have collected some links to free programs that allow you to easily setup a USB drive to install Windows or Linux on a computer. NOTE: If you have problems getting the BIOS on your computer to let you boot from a USB drive, see our article about booting from a USB drive even if your BIOS won’t let you. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • Windows XP mounting USB drive to same letter as previously mapped network drive

    - by GAThrawn
    Why does Windows always mount a USB drive as the next drive letter after the last physical drive, even when that letter is already taken by a mapped drive, and is there any way to improve this behaviour? What happens is I tend to use a few different flash drives on my PC, as well as having both a Blackberry and a personal phone that mount as USB drives when I plug them in to charge. Being on a corporate PC I also have a number of mapped network drives (some set by login script, some set as persistent mappings in my profile). When I first login I'll have drive letters like this: C: - Local Drive D: - DVD Drive G: - Login script mapped drive J: - Login script mapped drive When I plug the Blackberry in it'll mount two drives (one for onboard storage, one for the SD card) as E: and F:. If I then plug in another USB drive it will mount as G:, even though that's already taken by a network mapped drive. This leaves me with the following drives: C: - Local Drive D: - DVD Drive E: - USB drive (Blackberry) F: - USB drive (Blackberry) G: - Login script mapped drive [G: - USB drive - mounted but not visible in Explorer or command prompt] J: - Login script mapped drive I then have to go into Disk Management, find the new USB drive that's mounted to G: and re-assign it to another letter eg Z:, once this is done Auto-Play detects it and throws up its normal dialog, and its browseable in Explorer. While this is OK to do if you only use one or two USB drives and have admin access to your PC with your login account, its a total pain in the proverbial if you regularly use a whole load of different USB devices, and corporate policy means you have one account for your normal login (that only has User access to workstations), but have to use a different account for any privileged action. I realize that one possible reason for this is the difference between hardware which is mounted and assigned drive letters at the systen level, and mapped drives which are done at the user level. For USB devices that are already plugged in before login, then obviously they're mounted before Windows knows what network drives may be mapped. However if you plug the USB devices in after you're fully logged in and have drives mapped then Windows must know which letters are available?

    Read the article

  • Flash Player error logs on Mac OS X

    - by paleozogt
    I'm on Mac OS X 10.5.8 running Flash Player 10,0,32,18. Flash Player is dumping giant amounts of error logging into the system log (stuff like "bit length overflow" and "code 0 bits 6-7"). Here's a tiny sampling: Oct 14 13:09:41 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:09:41 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 6 bits 6->7 Oct 14 13:09:41 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:09:41 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 5 bits 6->7 Oct 14 13:09:55 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:09:55 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 6 bits 6->7 Oct 14 13:09:55 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:09:55 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 5 bits 6->7 Oct 14 13:09:55 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:09:55 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 0 bits 6->7 Oct 14 13:10:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 4 bits 6->7 Oct 14 13:10:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 12 bits 6->7 Oct 14 13:10:20 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:20 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 6 bits 6->7 Oct 14 13:10:20 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:20 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 5 bits 6->7 Oct 14 13:10:21 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:21 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 0 bits 6->7 Oct 14 13:10:21 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:21 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 12 bits 6->7 Oct 14 13:10:31 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:31 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 7 bits 6->7 Oct 14 13:10:31 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:10:31 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 12 bits 6->7 Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 3 bits 6->7 Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 4 bits 6->7 Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 3 bits 7->6 Oct 14 13:11:06 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 4 bits 5->6 Oct 14 13:11:07 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:07 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 3 bits 6->7 Oct 14 13:11:07 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:07 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 3 bits 6->7 Oct 14 13:11:15 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:15 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 3 bits 6->7 Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 7 bits 6->7 Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 0 bits 4->5 Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 14 bits 4->5 Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 10 bits 5->4 Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: code 4 bits 5->4 Oct 14 13:11:26 thorst-2 [0x0-0x58058].com.adobe.flash-10.0[2416]: bit length overflow Any ideas on what this may be about?

    Read the article

  • Benchmarking Linux flash player and google chrome built in flash player

    - by Fischer
    I use xubuntu 14.04 64 bit, I installed flash player from software center and xubuntu-restricted-extras too Are there any benchmarks on Linux flash player and google chrome built in flash player? I just want to see their performance because in theory google's flash player should be more updated and have better performance than the one we use in Firefox. (that's what I read everywhere) I have chrome latest version installed and Firefox next, and I found that flash videos in Chrome are laggy and they take long time to load. While the same flash videos load much faster in Firefox and I tend to prefer watching flash videos in firefox, especially the long ones because it loads them so much faster. I can't believe these results on my PC, so is there any way to benchmark flash players performance on both browsers? I want to know if it's because of the flash player or the browsers or something else

    Read the article

  • .htaccess: Redirect Hotlink Flash --> Site with embed Flash

    - by user5571
    I have some .php sites that embeds .swf files. These .swf files are now linked to by some other guys. And I don't want them to simply open the SWF, I want them to force being redirect to the page where the flash is embed. Data: Site: www.example.com/1 (www.example.com/2, www.example.com/3 and so on) Flash: www.example.com/flash/flash_NUMBER.swf So for www.example.com/1: Site: www.example.com/1 Flash: www.example.com/flash/flash_1.swf I now want to redirect the user who types "www.example.com/flash/flash_1.swf" into his URL to be redirect to www.example.com/1. The Problem I have that the flash needs to be still accesseable via www.example.com/1 <-- I don't get that working (the Flash is embed into that page). The tool I would like to use for this is the .htaccess & RewriteRule. I hope someone can help me out.

    Read the article

  • .htaccess: Redirect Hotlink Flash --> Site with embed Flash

    - by user5571
    Hello, I have some .php sites that embeds .swf files. These .swf files are now linked to by some other guys. And I don't want them to simply open the SWF, I want them to force being redirect to the page where the flash is embed. Data: Site: www.example.com/1 (www.example.com/2, www.example.com/3 and so on) Flash: www.example.com/flash/flash_NUMBER.swf So for www.example.com/1: Site: www.example.com/1 Flash: www.example.com/flash/flash_1.swf I now want to redirect the user who types "www.example.com/flash/flash_1.swf" into his URL to be redirect to www.example.com/1. The Problem I have that the flash needs to be still accesseable via www.example.com/1 <-- I don't get that working (the Flash is embed into that page). The tool I would like to use for this is the .htaccess & RewriteRule. I hope someone can help me out.

    Read the article

  • Flash Sampler App - Tour de Flash???

    - by user146543
    I am looking for an app or apps which I can use to demonstrate many of the specific graphics, animation, and interaction capabilities available using Flash CS4 Pro. Basically something just like the Tour de Flex app only for Flash CS3/CS4 Pro. The Adobe site has a sparse set of some examples, but again I am looking for something more comprehensive like Tour de Flex.

    Read the article

  • Flash/Flex/Air and iOS

    - by David Archer
    I'm just a little confused with all of the news recently regarding the cancellation of mobile flash, so was hoping for a little help. I've had a search through and can't find the answers to these questions, so any help would be great. First up, I'm looking to create a game in Flash first, to test whether the concept works as a fun game (on Newgrounds/Kongregate/Facebook etc.). Would it be best to use Flash CS5.5, or Flash Builder? Secondly, with mobile flash now being discontinued by Adobe, could I still port this game over to iOS through the Flash platform, or would it be better at that point to re-write the whole game using Objective C? (NOTE: I'm not an Objective C developer, but am instead a Javascript and Actionscript dev). Any help would be great. Thanks!

    Read the article

  • Unable to recognize hard drive after replacing a drive

    - by Peter Schriver
    I have a Poweredge 830 that I had been using with 1 OS Sata drive and 3 data drives. One of the drives had some failing sectors so I replaced it with a different drive. For some bizarre reason the computer would not reboot so I disconnected all of the media drives and did a clean reinstall on the OS drive. Only the boot drive and one of the media drives are now recognized by my Bios. Drive 0 and 2. Drive 1 and 3 are listed in the Bios as "Unkown Device" Any help would be appreciated I think there may be something wrong with the install. For some reason when I attempt to change the display it says I have a laptop.If you think a reinstall is in order I will try that.

    Read the article

  • phablet-flash aborting while installing Ubuntu Touch on Nexus 4

    - by Till B
    I have a Nexus 4 with Android 4.3 installed and I want to flash it to Ubuntu Touch. My system is Ubuntu 12.04, running inside a virtual machine on Mac OS 10.5.8. To use the VM, I opened an NAT bridge and forwarded port 5037 for adb, I can see the Nexus with adb and e.g. use the adb shell into it. USB ports are also forwarded to the VM. I follow these instructions to the letter. My bootloader is unlocked, just as it was described in the instructions. Now I encounter different issues, when executing sudo phablet-flash ubuntu-system --no-backup. On the first run, it got stuck in this state: INFO:phablet-flash:Decompressing partitions/recovery.img from /home/till/Downloads/phablet-flash/imageupdates/pool/device-5ba3031cb0d6fc624848266edba781e3e821b6e1e8dd21105725f0ab26077d0a.tar.xz INFO:phablet-flash:Restarting device... wait INFO:phablet-flash:Restarting device... wait complete INFO:phablet-flash:Booting /tmp/tmpMSN8bm/partitions/recovery.img < waiting for device > downloading 'boot.img'... OKAY [ 1.772s] booting... OKAY [ 0.005s] finished. total time: 1.779s INFO:phablet-flash:Waiting for recovery image to boot The following happened: around the line "INFO:phablet-flash: Restarting...", it rebooted into the bootloader. The bootloader shows only for two seconds, then the screen goes off and the phone stays off. But I do notice, that the screen is not off - it is just black, but the background light is on. If I wait long enough, phablet-flash aborts with ERROR:phablet-flash:Wait for recovery expired On the second try, I wanted to manually start the bootloader and choose "Recovery mode". Pressing "volume down+power" at first did nothing. Releasing the buttons and then pressing them again brought me into the bootloder. After choosing "Recovery mode", phablet-flash continued and after a while aborted with the following output: INFO:phablet-flash:Wait for recovery image to boot complete INFO:phablet-flash:Clearing /data and /cache INFO:phablet-flash:Pushing /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz to /cache/recovery/ failed to copy '/home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz' to '/cache/recovery/': Permission denied ERROR:phablet-flash:Command 'adb push /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz /cache/recovery/' returned non-zero exit status 1 Removing directory /tmp/tmpDnbz6N Removing directory /tmp/tmpth4L6w What can I do to properly flash my phone with Ubuntu Touch? I noticed that adb does not show the phone in recovery mode: Typing adb devices, when the Nexus 4 is in recovery mode, shows the serial number and the state device, where it should show recovery. Should the phone be rooted? This is not mentioned in the instructions.

    Read the article

  • Fonts still missing in Flash after cleaning caches

    - by Anriëtte Combrink
    Hi there I was having missing fonts in Flash CS4, so I cleaned the font caches using the following commands in Terminal: sudo atsutil databases -remove atsutil server -shutdown atsutil server -ping These commands ran fine, so I restarted and opened my Flash file. Now suddenly Verdana is missing in Flash which was previously there. I ran FontNuke, and cleaned caches, and rebooted. Still nothing showed in Flash. I ran Cocktail, and cleaned just the font caches (all users on system), still nothing in Flash. I reinstalled Flash (didn't work) I then uninstalled Flash, rebooted and installed Flash, rebooted. (didn't work) After all this, Verdana still doesn't load in Flash. I validated all fonts in Font Book and removed the erroneous fonts. Is there any other way I can have all the fonts load in Flash (eliminate another cache I am not seeing)? I am so sick of Flash and its font caches and Verdana is pretty much a standard font so what am I doing wrong here?

    Read the article

  • Create and use a Button class on AS3.0

    - by Madcowe
    I am currently working on a game and it is all going well. On the shop screen there are several buttons that affect the player's stats for when the player restarts the game. The button's names (with a text on the left), however, are rather cryptic and it's hard to figure out what they do unless you test or something. So the solution I came up with, is to create an InfoBox with an InfoText inside so that when the cursor is over the button it appears with the description, cost and etc. This I managed to do too however, the way I was about to do it would mean that I had to create 3 event listeners per button (CLICK, ROLL_OVER, ROLL_OUT) and, obviously, 3 functions connected to each event listener. Now, I don't mind much about having 1 event listener per button, for the click, but since the other events are just to make a box appear and disappear as well as display some text, I thought it was way too much of a mess of code. What I tried to do: I created a new class called InfoBoxButton, and this is the class' code: package { import flash.display.SimpleButton; import flash.display.MovieClip; import flash.ui.Mouse; import flash.events.MouseEvent; public class InfoBoxButton extends SimpleButton { public var description:String; public var infoBox:InfoBox; public function InfoBoxButton(description) { this.addEventListener( MouseEvent.ROLL_OVER, displayInfoText, false, 0, true); this.addEventListener( MouseEvent.ROLL_OUT, hideInfoText, false, 0, true); } private function displayInfoText() { infoBox.infoText.text = description; infoBox.visible = true; } private function hideInfoText() { infoBox.infoText.text = ""; infoBox.visible = false; } } } But now I don't have an idea how to associate it with the button, I have tried this: public var SoonButton:InfoBoxButton = new InfoBoxButton("This is merely a test"); The SoonButton is a button I made on the shopscreen, SoonButton is it's instance name, but I can't think of a way of associating one button to the other... I have been fiddling with the code for like 3 hours yesterday and no luck... can anyone give me some pointers on how I should go about doing it?

    Read the article

  • Hard drive mounted at / , duplicate mounted hard drive after using MountManager

    - by HellHarvest
    possible duplicate post I'm running 12.04 64bit. My system is a dual boot for both Ubuntu and Windows7. Both operating systems are sharing the drive named "Elements". My volume named "Elements" is a 1TB SATA NTFS hard drive that shows up twice in the side bar in nautilus. One of the icons is functional and even has the convenient "eject" icon next to it. Below is a picture of the left menu in Nautilus, with System Monitor-File Systems tab open on top of it. Can someone advise me about how to get rid of this extra icon? I think the problem is much more deep-rooted than just a GUI glitch on Nautilus' part. The other icon does nothing but spit out the following error when I click on it (image below). This only happened AFTER I tried using Mount Manager to automate mounting the drive at start up. I've already uninstalled Mount Manager, and restarted, but the problem didn't go away. The hard drive does mount automatically now, so I guess that's cool. But now, every time I boot up now and open Nautilus, BOTH of these icons appear, one of which is fictitious and useless. According to the image above and the outputs of several other commands, it appears to be mounted at / In which case, no matter where I am in Nautilus when I try to click on that icon, of course it will tell me that that drive is in use by another program... Nautilus. I'm afraid of trying to unmount this hard drive (sdb6) because of where it appears to be mounted. I'm kind of a noob, and I have this gut feeling that tells me trying to unmount a drive at / will destroy my entire file system. This fear was further strengthened by the output of "$ fsck" at the very bottom of this post. Error immediately below when that 2nd "Elements" hard drive is clicked in Nautilus: Unable to mount Elements Mount is denied because the NTFS volume is already exclusively opened. The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command. It's odd to me that that error message above claims that it's an NTFS volume when everything else tell me that it's an ext4 volume. The actual hard drive "Elements" is in fact an NTFS volume. Here's the output of a few commands and configuration files that may be of interest: $ fuser -a / /: 2120r 2159rc 2160rc 2172r 2178rc 2180rc 2188r 2191rc 2200rc 2203rc 2205rc 2206r 2211r 2212r 2214r 2220r 2228r 2234rc 2246rc 2249rc 2254rc 2260rc 2261r 2262r 2277rc 2287rc 2291rc 2311rc 2313rc 2332rc 2334rc 2339rc 2343rc 2344rc 2352rc 2372rc 2389rc 2422r 2490r 2496rc 2501rc 2566r 2573rc 2581rc 2589rc 2592r 2603r 2611rc 2613rc 2615rc 2678rc 2927r 2981r 3104rc 4156rc 4196rc 4206rc 4213rc 4240rc 4297rc 5032rc 7609r 7613r 7648r 9593rc 18829r 18833r 19776r $ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb6 496G 366G 106G 78% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 1.5M 790M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 672K 2.0G 1% /run/shm /dev/sda1 932G 312G 620G 34% /media/Elements /home/solderblob/.Private 496G 366G 106G 78% /home/solderblob /dev/sdb2 188G 100G 88G 54% /media/A2B24EACB24E852F /dev/sdb1 100M 25M 76M 25% /media/System Reserved $ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00093cab Device Boot Start End Blocks Id System /dev/sda1 2048 1953519615 976758784 7 HPFS/NTFS/exFAT Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d9b Device Boot Start End Blocks Id System /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sdb2 206848 392378768 196085960+ 7 HPFS/NTFS/exFAT /dev/sdb3 392380414 1465147391 536383489 5 Extended /dev/sdb5 1456762880 1465147391 4192256 82 Linux swap / Solaris /dev/sdb6 392380416 1448374271 527996928 83 Linux /dev/sdb7 1448376320 1456758783 4191232 82 Linux swap / Solaris Partition table entries are not in disk order $ cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> UUID=77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 defaults 0 1 UUID=F6549CC4549C88CF /media/Elements ntfs-3g users 0 0 $ sudo blkid /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ sudo blkid -c /dev/null (appears to be exactly the same as above) /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ mount /dev/sdb6 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /media/Elements type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /home/solderblob/.Private on /home/solderblob type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=76a47b0175afa48d,ecryptfs_fnek_sig=391b2d8b155215f7) gvfs-fuse-daemon on /home/solderblob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=solderblob) /dev/sdb2 on /media/A2B24EACB24E852F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) /dev/sdb1 on /media/System Reserved type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) $ ls -a . A2B24EACB24E852F Ubuntu 12.04.1 LTS amd64 .. Elements System Reserved $ cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=2013000k,nr_inodes=503250,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=809872k,mode=755 0 0 /dev/disk/by-uuid/77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 /dev/sda1 /media/Elements fuseblk rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 /home/solderblob/.Private /home/solderblob ecryptfs rw,relatime,ecryptfs_fnek_sig=391b2d8b155215f7,ecryptfs_sig=76a47b0175afa48d,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs 0 0 gvfs-fuse-daemon /home/solderblob/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/sdb2 /media/A2B24EACB24E852F fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sdb1 /media/System\040Reserved fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0 $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) /dev/sdb6 is mounted. WARNING!!! The filesystem is mounted. If you continue you ***WILL*** cause ***SEVERE*** filesystem damage. Do you really want to continue<n>? no check aborted.

    Read the article

  • 1.5 TB USB Drive failed to mount

    - by user89348
    Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • How does a hard drive compare to Flash memory working as a hard drive in terms of speed?

    - by Jian Lin
    Some experiment I did with hard drive read/write speed was 10MB/s write and 40MB/s read, and with a USB Flash drive, it can be 5MB/s write and 10MB/s read. Also, if I put a virtual hard drive .vhd file in a hard drive or in a USB Flash drive and try a Virtual Machine using it, the one using the hard drive is quite fast, while the one using the USB Flash drive is close to not usable. So I wonder some early netbooks use 4GB or 8GB flash memory as the hard drive, and even the Apple Mac Air has an option of using flash memory instead of a hard drive. But in those situation, will the speed be slower than using a hard drive, like in the case of a USB Flash drive?

    Read the article

  • how to i lock a Harddrive to a certain drive letter

    - by Memor-X
    i have an external hard drive that i have set to Drive F which on it contains some programs that i have shortcuts on the desktop how i have a second external hard drive which i store my music on which is auto assigned to Drive E, due to someone thinking that Australians love to have f** wings on power plugs for hard drives while power boards have each socket close together i can have both of these hard drives set at the same time my music hard drive i normally only plug up when i sync music to my ipod but on occasion when i unplug my music hard drive and plug my old one back in or at times when i turn on my computer with the music hard drive in, turn off my computer and turn it back on with my old hard drive it's drive letter gets switched to E i get annoyed having to always go into disk management and change the drive letter back to F when this happens so i am wondering if I can lock my hard drive to always be F, if anything else tries to be F it can fail for all i care If there is a batch file i can use that'll go though all the steps of Disk Management to change a drive's letter, that way i can set it up in the startup folder

    Read the article

  • Adobe Flash not working in 12.04

    - by catnthehat
    I cannot get Adobe Flash working in either Firefox or Chrome. I have tried the Flash-Aid plug in for Firefox but it has not made any difference. As far as I can see, Flash installs without error and Firefox thinks it can run Flash but (for example) YouTube just shows a blank square where the movie should be me. Chrome reports "missing plugin". about:plugins in Firefox reports: Shockwave Flash File: libflashplayer.so Version: Shockwave Flash 11.2 r202 MIME Type Description Suffixes application/x-shockwave-flash Shockwave Flash swf application/futuresplash FutureSplash Player spl

    Read the article

  • Flash: How to make an embedded video not autoplay

    - by jb
    I'm embedding a Flash video into an HTML and would like the user to have to click it to begin playing. According to the Adobe <object> / <embed> element documentation, there are variety of methods to do this: 1) Add a Flash parameter inside the <object> tag: <param name="play" value="false"> 2) Add the attribute play inside the <embed> tag: <embed ... play="false"> 3) Add the attribute flashvars inside the <embed> tag: <embed ... flashvars="play=false"> Which is awesome. Only ... none of them work for me: http://johnboxall.github.com/test/flash/flash.htm My code looks like this now: <object width="590" height="475"> <param name="movie" value="untitled_skin.swf"> <param name="play" value="false"> <embed src="untitled_skin.swf" width="590" height="475" type="application/x-shockwave-flash" play="false" flashvars="autoplay=false&play=false" menu="false"></embed> </object> Anyone have any ideas? What am I doing wrong?

    Read the article

  • Firefox not detecting Flash 11

    - by user34103
    I installed the Flash 11 plugin using the software center (and have also removed the reinstalled it via command-line in the terminal), yet Firefox still claims the latest version of the plugin I have is 10. (And just to clarify, I have been sure to reboot both Firefox and the entire computer after installing). On further investigation (this may be a red herring, pardon) I ran the uname -a command-line in terminal to assure that I was running the 64-bit version of Ubuntu, and received this feedback: 3.0.0-13-generic #22-Ubuntu SMP Wed Nov 2 13:25:36 UTC 2011 i686 i686 i386 GNU/Linux I don't understand the series "i686 i686 i386". Which applies to my version of Ubuntu? Does this mean I've accidentally installed 32-bit Ubuntu? Very much a beginner here - I've combed the threads but have so little understanding what my exact issue is that I haven't been able to find an answer.

    Read the article

  • Why is my external USB hard drive sometimes completely inaccessible?

    - by Eliah Kagan
    I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

    Read the article

  • Make a Drive Image Using an Ubuntu Live CD

    - by Trevor Bekolay
    Cloning a hard drive is useful, but what if you have to make several copies, or you just want to make a complete backup of a hard drive? Drive images let you put everything, and we mean everything, from your hard drive in one big file. With an Ubuntu Live CD, this is a simple process – the versatile tool dd can do this for us right out of the box. We’ve used dd to clone a hard drive before. Making a drive image is very similar, except instead of copying data from one hard drive to another, we copy from a hard drive to a file. Drive images are more flexible, as you can do what you please with the data once you’ve pulled it off the source drive. Your drive image is going to be a big file, depending on the size of your source drive – dd will copy every bit of it, even if there’s only one tiny file stored on the whole hard drive. So, to start, make sure you have a device connected to your computer that will be large enough to hold the drive image. Some ideas for places to store the drive image, and how to connect to them in an Ubuntu Live CD, can be found at this previous Live CD article. In this article, we’re going to make an image of a 1GB drive, and store it on another hard drive in the same PC. Note: always be cautious when using dd, as it’s very easy to completely wipe out a drive, as we will show later in this article. Creating a Drive Image Boot up into the Ubuntu Live CD environment. Since we’re going to store the drive image on a local hard drive, we first have to mount it. Click on Places and then the location that you want to store the image on – in our case, a 136GB internal drive. Open a terminal window (Applications > Accessories > Terminal) and navigate to the newly mounted drive. All mounted drives should be in /media, so we’ll use the command cd /media and then type the first few letters of our difficult-to-type drive, press tab to auto-complete the name, and switch to that directory. If you wish to place the drive image in a specific folder, then navigate to it now. We’ll just place our drive image in the root of our mounted drive. The next step is to determine the identifier for the drive you want to make an image of. In the terminal window, type in the command sudo fdisk -l Our 1GB drive is /dev/sda, so we make a note of that. Now we’ll use dd to make the image. The invocation is sudo dd if=/dev/sda of=./OldHD.img This means that we want to copy from the input file (“if”) /dev/sda (our source drive) to the output file (“of”) OldHD.img, which is located in the current working directory (that’s the “.” portion of the “of” string). It takes some time, but our image has been created…Let’s test to make sure it works. Drive Image Testing: Wiping the Drive Another interesting thing that dd can do is totally wipe out the data on a drive (a process we’ve covered before). The command for that is sudo dd if=/dev/urandom of=/dev/sda This takes some random data as input, and outputs it to our drive, /dev/sda. If we examine the drive now using sudo fdisk –l, we can see that the drive is, indeed, wiped. Drive Image Testing: Restoring the Drive Image We can restore our drive image with a call to dd that’s very similar to how we created the image. The only difference is that the image is going to be out input file, and the drive now our output file. The exact invocation is sudo dd if=./OldHD.img of=/dev/sda It takes a while, but when it’s finished, we can confirm with sudo fdisk –l that our drive is back to the way it used to be! Conclusion There are a lots of reasons to create a drive image, with backup being the most obvious. Fortunately, with dd creating a drive image only takes one line in a terminal window – if you’ve got an Ubuntu Live CD handy! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayHow to Browse Without a Trace with an Ubuntu Live CDWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy WayClone a Hard Drive Using an Ubuntu Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

    Read the article

  • Slow transfer to external USB3 hard drive

    - by JMP
    Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to transfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive transferring this amount in windows. But don't have that option at the moment.

    Read the article

  • Programatically check whether a drive letter is a shared/network drive

    - by Philip Daubmeier
    Hi SO community! I searched a while but found nothing that helped me. Is there a way to check whether a drive letter stands for a shared drive/network drive or a local disc in python? I guess there is some windows api function that gives me that info, but I cant find it. Perhaps there is even a method already integrated in python? What I am looking for is something with this or similar behaviour: someMagicMethod("C:\") #outputs True 'is a local drive' someMagicMethod("Z:\") #outputs False 'is a shared drive' That would help me as well: someMagicMethod2() #outputs list of shared drive letters Thanks a lot in advance!

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >