Search Results

Search found 97 results on 4 pages for 'g4'.

Page 1/4 | 1 2 3 4  | Next Page >

• Remote Installing OS X 10.5 on a PowerBook G4

  - by QuixoticAspie

  I recently acquired a PowerBook G4 (always loved the PPC architecture over Intel when it comes to Apple), currently it has OS X 10.4 installed. Unfortunately I can't find the original 10.5 install disc I had, though I made an ISO of it some time ago, which I've now burnt to a DVD-R DL disc (the SuperDrive is a DVD-R only iirc). This disc keeps being ejected by the PowerBook G4 (reads other discs just fine, except one). So I've been pondering doing a remote install, however the instructions I've seen are for MacBooks - I have DVD or CD Sharing installed, but the part in the instructions (http://guides.macrumors.com/Complete_Steps_to_Perform_a_Clean_OS_X_Reinstall_on_Your_MacBook_Air#Using_Remote_Install) about the 'Install Assistant', I don't get such a thing - only the BootCamp Installer. So my question is: How do I go about doing a remote install on this PowerBook G4? Or is there another alternative, without forking out on a new drive?

  Read the article

• Powermac G4 Booting Up to White Screen?

  - by David

  I have a Powermac G4 that I use as a server. Since yesterday, for any reason, it chimes, and just goes to a white screen. The only way to make it work again is to reset the PMU by holding the button inside for 10 seconds. It is running 10.4.11.

  Read the article

• iPod Nano 5th Gen and an old G4

  - by bobber205

  I want to buy my dad an iPod nano for christmas. All he has for a computer is an old G4 that is still running Mac OS X 10.3.x (10.3.9 probably) What iPod can I buy him and he still be able to use? The newest nano requires iTunes 9 which he cannot run. Thanks!

  Read the article

• Powerbook G4 unresponsive on wake?

  - by David

  I have a Powerbook G4 17" and I recently updated to the Mac OS 10.5.8 and got a monitor. I put it to sleep by closing the lid and sometimes it resumes normally and sometimes it doesn't. It doesn't matter if it's on sleep for a day or 10 minutes, it just happens randomly. It wakes up, but the screen doesn't flash blue for a few seconds like it normally would, indicating that it found the second monitor. It just wakes up, and a picture appears on both screens and the mouse moves, but nothing responds. The only way I can make it work again is by holding down the power button until it shuts down and then turning it on again. this frustrating because then I have to reopen all my programs and Safari tabs. I tried resetting the PMU by unplugging everything and taking out the batter, then holding the power button for five seconds, but it has the same problem no matter what I do.

  Read the article

• General video performance affected on Mac OSX 10.5 (PowerBook G4)

  - by r0ca

  Hi all, I'm quite new to Mac and I just got a PowerBook G4 for free. I installed OSX 10.5 on it and for the first two weeks, everything was going kinda smooth even if this is similar to a P3. I'm not expecting awsome video performance but at least be able to watch some videos from Youtube. Yesterday night, I installed Office 2008 for mac and this morning, even after a reboot, my computer is way much slower that I used to know. I watched a youtube video and the framerate was 1:1. I also noticed it on flash adds, it's way slower! Is there anything that I can do to increase video performance, see what's the process list running and taking more GPU or CPU, what's taking more ram and stuff like that?! What do you guys, Mac pros, would do on an old laptop with OSX 10.5 Thanks!

  Read the article

• Ubuntu 12.04 on MAC Mini G4

  - by Buford Speed

  I have a MAC Mini G4. I would like to install Ubuntu on it. I have looked at this Q&A Mac G4 with no OS: can Ubuntu be used?, and I have a question. Is it worth the hassle to install Ubuntu, or should I keep MAC OS. The unit has MAC OS 10.4 (Tiger). It is used for normal day to day operations, word processing, spreadsheets, browsing, and keeping track of finances. I'd like to install Ubuntu if I can. So is it possible?

  Read the article

• Problem in installation in My Hp g4 1226se

  - by vivek Verma

  1vivek.100 Dual booting error in Hp pavilion g4 1226se Dear sir or Madam, My name is vivek verma.... I am the user of my Hp laptop which series and model name is HP PAVILION G4 1226SE........ i have purchase in the year of 2012 and month is February.....the windows 7 home basic 64 Bit is already installed in in my laptop.... Now i want to install Ubuntu 12.04 Lts or 13.10 lts..... i have try many time to install in my laptop via live CD or USB installer....and i have try many live CD and many pen drive to install Ubuntu ... but it is not done......now i am in very big problem...... when i put my CD or USB drive to boot and install the Ubuntu......my laptop screen is goes the some black (brightness of my laptop screen is very low and there is very low visibility ) and not showing any thing on my laptop screen..... and when i move the my laptop screen.....then there is graphics option in this screen to installation of the Ubuntu option......and when i press the dual boot with setting button and press to continue them my laptop is goes for shutdown after 2 or 5 minutes..... ...... and Hp service center person is saying to me our laptop hardware has no problem.....please contact to Ubuntu tech support............. show please help me if possible..... My laptop configuration is here...... Hardware Product Name g4-1226se Product Number QJ551EA Microprocessor 2.4 GHz Intel Core i5-2430M Microprocessor Cache 3 MB L3 cache Memory 4 GB DDR3 Memory Max Upgradeable to 4 GB DDR3 Video Graphics Intel HD 3000 (up to 1.65 GB) Display 35,5 cm (14,0") High-Definition LED-backlit BrightView Display (1366 x 768) Hard Drive 500 GB SATA (5400 rpm) Multimedia Drive SuperMulti DVD±R/RW with Double Layer Support Network Card Integrated 10/100 BASE-T Ethernet LAN Wireless Connectivity 802.11 b/g/n Sound Altec Lansing speakers Keyboard Full size island-style keyboard with home roll keys Pointing Device TouchPad supporting Multi-Touch gestures with On/Off button PC Card Slots Multi-Format Digital Media Card Reader for Secure Digital cards, Multimedia cards External Ports 1 VGA 1 headphone-out 1 microphone-in 3 USB 2.0 1 RJ45 Dimensions 34.1 x 23.1 x 3.56 cm Weight Starting at 2.1 kg Power 65W AC Power Adapter 6-cell Lithium-Ion (Li-Ion) What's In The Box Webcam with Integrated Digital Microphone (VGA) Software Operating System: Windows 7 Home Basic 64bit....Genuine..... ......... Sir please help me if possible....... Name =vivek verma Contact no.+919911146737 Email [email protected]

  Read the article

• Firmware/driver for Broadcom wifi card, PowerBook G4 running Ubuntu 12.04 [duplicate]

  - by user107831

  This question already has an answer here: How to Install Broadcom Wireless Drivers 40 answers This is my first time working with Ubuntu (or Linux), so please be patient. I am running Ubuntu 12.04-powerpc "Precise Pangolin" on a Mac PowerBook G4 with 1.67GHz processor. The firmware/driver for the wifi card is missing. For reasons not worth explaining, I cannot physically plug the computer into the network. I have another computer, a MacBook Pro running OSX, from which I can download files and port them by USB thumb drive. The wifi card in the PowerBook G4 is by Broadcom. The chip is BCM4306, rev. 3. The PCI number is 14e4:4302. I have downloaded b43-fwcutter_015-14_powerpc.deb and dropped it into the Home folder on the Ubuntu machine. However, it will not install. When I double-click, it opens with Ubuntu SoftwareCenter, but the "Install" button is inactive: I can't click it. There's a message beside the inactive button saying, "An older version of 'b43-fwcutter' is available in your normal software channels. Only install this file if you trust the origin." If I "right-click" the .deb file and open with Archive Manager, it shows me the "DEBIAN" and "usr" folders, but I'm unsure what to do from there...and fairly certain this is not the right way to do things. Maybe I have the wrong version of b43-fwcutter for my machine/version of Ubuntu? The documentation for this problem is a mess. It refers to all sorts of out-of-date Ubuntu versions and to an array of different "cutter" and firmware files. Maybe I'd be able to figure this out if I were a more seasoned Ubuntu user, but I have no idea why Sofware Center won't let me do the install. I would be VERY grateful for an explanation of how to get the wifi card working on this machine again. Thank you!

  Read the article

• Getting Adobe Flash plugin on PowerBook G4 running Lubuntu

  - by mylottd

  I am running Lubuntu on my PowerBook G4 with a PowerPC processor. If I want to install any file, should I be looking for the Linux version or the PowerPC version? I specifically want to get a Adobe Flash Player 11 or newer plugin for Firefox, but it would be nice to know what to look for when I'm getting other files. You might have already been able to tell, but I don't know a lot at all about this stuff, sorry.

  Read the article

• ubuntu server 12.10 get input signal out of range on HP DL380 G4

  - by lix

  After installed ubuntu 12.10 server on HP DL380 G4, I can't boot into it. And the LCD got message "Input signal out of range, recommened settings is 1280x1024". I can't see the terminal and tried several LCDs and still can not work either. How can I should do now? I tried 12.04 but got fail message when installing (select and install software). Is that signal push me to change another os instead of my favorite ubuntu?

  Read the article

• HP DL360 G4 screen resolution problem

  - by dogmatic69

  I just bought an old blade server to mess about with at home and cant get the thing to work. I have run the installer 11.10 x64 server and that was fine. After installing and rebooting, POST is fine but when grub kicks in the screen shows a popup type box complaining that it cant use the resolution. I have tried different screens and its always the same. I can reboot and go back into the installer and the screen is fine. I tried to follow some guides on-line about changing the resolution but I cant get a terminal. I found one in the installer but that is using the ram as /. the installer says 'the drive is mounted as "/target"' but I don't see that, nor /mnt/target. Could anyone help me configure this and get it running. Thanks.

  Read the article

• Recovering/Creating NewWorld Partition on Mac G4 (PPC) after botched Debian Install

  - by Luis Espinal

  I was trying to install Debian 5.04 on a Mac G4, and in typical geek tradition, I didn't RTFM. During installation, I nuked all existing partitions, creating new to my liking. But as I learned later during the installation process, yaboot needed a NewWorld partition, so I can't boot the installation. I don't have any OSX CDs with me (this is a used G4 I purchased of craigslist) with which to create a HFS partition. I've re-run the Debian installer, which lets me create a partition that is supposed to be of type 'NewWorld', but the installer does not seem to like it or recognizes it. Any ideas how to proceed from here? Thanks.

  Read the article

• Recovering/Creating NewWorld Partition on Mac G4 (PPC) after botched Debian Install

  - by Luis Espinal

  I was trying to install Debian 5.04 on a Mac G4, and in typical geek tradition, I didn't RTFM. During installation, I nuked all existing partitions, creating new to my liking. But as I learned later during the installation process, yaboot needed a NewWorld partition, so I can't boot the installation. I don't have any OSX CDs with me (this is a used G4 I purchased of craigslist) with which to create a HFS partition. I've re-run the Debian installer, which lets me create a partition that is supposed to be of type 'NewWorld', but the installer does not seem to like it or recognizes it. Any ideas how to proceed from here? Thanks.

  Read the article

• Capturing a firewire video feed in Leopard on a G4

  - by Justin Dearing

  Hi, I have a powerbook G4 that I loaded up with Leopard (OSX 10.5). I don't have iMovie, since the Leopard version requires an intel mac. I have a Sony Digital 8 Camcorder with firewire and usb output. The usb output requires a special driver on windows. I don't think OSX will support it. I wish to capture the video stream from the camera on my G4. VLC does not support firewire capture on OSX, I don't want to pay for QT professional. I'm looking for a solution. I'd prefer open source, but I'd consider freeware and inexpensive for pay options. On a related note, if it can capture still frames, I have a related question.

  Read the article

• Complete Apple Powerbook G4 format without disk

  - by Sam

  I have gone through many sites to look for the exact answer. However I failed. What I want: To completely format my Powerbook G4 to factory or brand new without any DVD/CD or Disk/Disc I am not worried about ethical or un-ethical way. I just need to format the entire Powerbook G4 to factory setting WITHOUT ANY DVD/CD/DISC/DISK so that It’s a brand new one. I am ready to do anything, but please don’t advice me on buying or download the MAC OS 10.5 Leopard from torrent or blah blah.

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• Is the PowerPC (G4) architecture better than Intel x86 architecture for certain types of application

  - by ralphc

  I have a PowerMac G4 from around the year 2000. It's a serviceable Unix machine but I don't do much with it since I have plenty of Pentium 4 machines around with Linux on them. I was wondering if the PowerPC based machine is capable of handling certain tasks faster or "better" than Intel based machines, or is it just another computer to use. I have OSX 10.4 Tiger for it, and I don't mind installing Yellow Dog Linux or UbuntuPPC if that will make it more useable.

  Read the article

• IBook G4 Charging Problems?

  - by Drew

  Hello, I am having some trouble with my iBook G4. It seems that whenever I plug it into the wall charger that it doesn't charge. It's not the charger's fault. There's a button on the back of it right next the battery, when I push it all five lights next to the button light up. I don't think where the charger is put in is broken. Any help? .

  Read the article

• Two cursor keys not working on iBook G4

  - by Charles Stewart

  The left and right cursor keys on my iBook G4 running Macos 10.4 do not respond. Since this holds for both Aqua and X11, I am inclined to think that this is a hardware problem. Are there any other checks I should do before seeking out the repair guy?

  Read the article

• Desktop G4: Wireless?

  - by Yar

  I just inherited a G4 Server (I don't know much about it, except that it runs 10.4 and cannot go beyond that). It does not have an Airport connection. How would I figure out what kind of card or network interface I need for Wifi?

  Read the article

• Ubuntu Server on Proliant ML350 G4

  - by eduardoavdr

  Hi Everyone, I have been given the task to change OS of a HP Proliant ML350 G4 server, and I decided to use Ubuntu server edition for that matter. The thing is that the server has already installed Windows server 2000 on the only Hard drive it has (SCSI). My question is, could I install an IDE HD on the IDE connection it has and install ubuntu without overwritting the boot configuration, so if I wanted to go back to the windows 2000 server installation with no problems? It also has a tape drive which is used for backups. Do you guys know how buntu deals with such devices? Thanks for your time

  Read the article

• iPod Touch G4 disconnects from Belkin N+ Router at random intervals

  - by leeand00

  I have an iPod Touch G4 and a Belkin N+ Router F5D8235-4 v2, and for some reason the iPod Touch disconnects from the router at random intervals. Checking the settings in the iPod, it will read that it is still connected to the router, but before I can access the internet again, I have to turn on Airplane mode and then turn it off again to get any program to work with the Internet again. I've tried upgrading the firmware in the router, but that also doesn't seem to help. I'm using the wiresless mode 802.11b&802.11g&802.11n in the 20/40MHz frequency. Is there any way of fixing this issue? It doesn't happen with any of the other devices that are connected to the router. This post has been cross-posted here

  Read the article

• Formatting an HP ProLiant dl380 G4

  - by i.h4d35

  I have an old HP ProLiant dl380 G4 server whose hard disk needs to be formatted. Unfortunately, I cannot seem to do so. For one, it doesn't seem to be detecting any Hard Drives attached to the Server. The Hard Disks show up in the Ctrl+A option (SCSI Configuration Utility). Also, while inserting the SmartStart CD (7.01 or 7.04), it shows a message that no logical drives are found and there aren't any options to create one. Alternately I've tried slipstreaming the SCSI Driver into the OS but that doesn't seem to be helping. Also, I have a USB Floppy drive (for the SCSI driver) but that doesn't seem to be detected. Also, directly installing the OS (MS Server 2003 Standard Edition) obviously doesn't work (shows no hard disk found) Could anyone please advise as to what other needs to be done to format my server? Also please tell me what are the possible errors/mistakes which've been made so that I can learn from them. I went through some questions here on ServerFault and the HP guides here but they weren't of much help to a n00b like me. Thanks in Advance.

  Read the article

• iBook G4 has black screen on boot

  - by Jonathan Patt

  I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

  Read the article

• Ubuntu 12.04 - HP ProLiant DL380 G4 - Load Maxes Out / Unresponsive

  - by Brian S

  Trying to post this question on here. I've posted it on the Ubuntu forums as well with no replies. Recently I upgraded an HP ProLiant DL380 G4 server from Ubuntu 10.04 server to Ubuntu 12.04 server. Upon doing so, the server will not - at random times - get to a load of 400+ and then become completely non-responsive. I use an SNMP graphing program (cacti) and the load steadily increases by about 10 every five minutes until it gets over 400 and the graphing stops. The graphs may not be accurate, but the CPU load averages about 3% before this happens - and right when the load starts increasing, it jumps to about 25% for 15 minutes and dramatically dips down to less than 1% (about 0.3%) until the graphing stops. I'm not able to open a SSH tunnel to the server to do anything. I've checked the /var/log/syslog and all logging stops at that time as well - with nothing else in there. The odd thing is - the server still responds to DNS queries for the zones it is authoritative on during this time - and at normal speed. Just not sure what the next step would be in order to find out what is going on - and how this issue can be corrected. The server cannot stay with Ubuntu 10.04 Server and needs to stay upgraded.

  Read the article

1 2 3 4  | Next Page >