Search Results

Search found 6376 results on 256 pages for 'git reset'.

Page 1/256 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • How Do I 'git fetch' and 'git merge' from a Remote Tracking Branch (like 'git pull')

    - by kaybenleroll
    I have set up some remote tracking branches in git, but I never seem to be able to merge them into the local branch once I have updated them with 'git fetch'. For example, suppose I have remote branch called 'an-other-branch'. I set that up locally as a tracking branch using git branch --track an-other-branch origin/an-other-branch So far, so good. But if that branch gets updated (usually by me moving machine and commiting from that machine), and I want to update it on the original machine, I'm running into trouble with fetch/merge: git fetch origin an-other-branch git merge origin/an-other-branch Whenever I do this, I get an 'Already up-to-date' message and nothing merges. However, a git pull origin an-other-branch always updates it like you would expect. Also, running git diff git diff origin/an-other-branch shows that there are differences, so I think I have my syntax wrong. What am I doing wrong?

    Read the article

  • Can't install git on Ubuntu 12.10

    - by Lucas Windir
    I'm following these instructions to install git on my laptop: http://git-scm.com/download/linux When I do: $ sudo apt-get install git-core This is what my terinal shows: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libasprintf0c2:i386 libcroco3:i386 libgettextpo0:i386 libgomp1:i386 libunistring0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: git git-man liberror-perl Suggested packages: git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn git-email git-gui gitk gitweb The following NEW packages will be installed: git git-core git-man liberror-perl 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,825 kB of archives. After this operation, 15.3 MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-man git git-core Install these packages without verification [y/N]? E: Some packages could not be authenticated lucas@lucas-Inspiron-N5050:~$ sudo apt-get install git-core Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libasprintf0c2:i386 libcroco3:i386 libgettextpo0:i386 libgomp1:i386 libunistring0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: git git-man liberror-perl Suggested packages: git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn git-email git-gui gitk gitweb The following NEW packages will be installed: git git-core git-man liberror-perl 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,825 kB of archives. After this operation, 15.3 MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-man git git-core Install these packages without verification [y/N]? y Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main liberror-perl all 0.17-1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git-man all 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git amd64 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git-core all 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/libe/liberror-perl/liberrorperl_0.17-1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git-man_1.7.10.4-1ubuntu1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git_1.7.10.4-1ubuntu1_amd64.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch http://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git-core_1.7.10.4-1ubuntu1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? How could I install git on Ubuntu 12.10? I can't even do it from the Ubuntu Software Center. Thanks in advance!

    Read the article

  • git pull gives error: 401 Authorization Required while accessing https://git.foo.com/bar.git

    - by spuder
    My macbook pro is able to clone/push/pull from the company git server. My cent 6.3 vm gets a 401 error git clone https://git.acme.com/git/torque-setup "error: The requested URL returned error: 401 Authorization Required while accessing https://git.acme.com/git/torque-setup/info/refs As a work around, I've tried creating a folder, with an empty repository, then setting the remote to the company server. I get the same error when trying a git pull The remotes are identical between the machines MacBook Pro (working) git --version git version 1.7.10.2 (Apple Git-33) git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) Cent 6.3 (not working) yum install -y git git --version git version 1.7.1 git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) The git server only allows https. Not git or ssh connections. Why is the macbook pro able to do a git pull, while the cent os machine can't? Solution Update 2013-5-15 As jku mentioned, the culprit is the old version of git installed on the cent box. Unfortunately, 1.7.1 is what you get when you run yum install git The work around is to manually install a newer version of git, or simply add the username to the repo git clone https://[email protected]/git/torque-setup

    Read the article

  • Git push over http (using git-http-backend) and Apache is not working

    - by Ole_Brun
    I have desperately been trying to get push for git working through the "smart-http" mode using git-http-backend. However after many hours of testing and troubleshooting, I am still left with error: Cannot access URL http://localhost/git/hello.git/, return code 22 fatal: git-http-push failed` I am using latest versions of Ubuntu (12.04), Apache2 (2.2.22) and Git (1.7.9.5) and have followed different tutorials found on the Internet, like this one http://www.parallelsymmetry.com/howto/git.jsp. My VHost file currently looks like this: <VirtualHost *:80> SetEnv GIT_PROJECT_ROOT /var/www/git SetEnv GIT_HTTP_EXPORT_ALL SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER DocumentRoot /var/www/git ScriptAliasMatch \ "(?x)^/(.*?)\.git/(HEAD | \ info/refs | \ objects/info/[^/]+ | \ git-(upload|receive)-pack)$" \ /usr/lib/git-core/git-http-backend/$1/$2 <Directory /var/www/git> Options +ExecCGI +SymLinksIfOwnerMatch -MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have changed the ownership of the /var/www/git folder to root.www-data and for my test repositories I have enabled anonymous push by doing git config http.receivepack true. I have also tried with authenticated users but with the same outcome. The repositories were created using: sudo git init --bare --shared [repo-name] While looking at the apache2 access.log, it appears to me that WebDAV is trying to be used, and that git-http-backend is never fired: 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "GET /git/hello.git/info/refs?service=git-receive-pack HTTP/1.1" 200 207 "-" "git/1.7.9.5" 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "GET /git/hello.git/HEAD HTTP/1.1" 200 232 "-" "git/1.7.9.5" 127.0.0.1 - - [20/May/2012:23:04:53 +0200] "PROPFIND /git/hello.git/ HTTP/1.1" 405 563 "-" "git/1.7.9.5" What am I doing wrong? Is it an issue with the version of git and/or apache that I am using perhaps? BTW: I have read all the git http related questions on ServerFault and StackOverflow, and none of them provided me with a solution, so please don't mark this as duplicate.

    Read the article

  • Git - post-receive hook with git pull "Failed to find a valid git directory"

    - by ludicco
    It's very weird but when setting a git repository and creating a post-receive hook with: echo "--initializing hook--" cd ~/websites/testing echo "--prepare update--" git pull echo "--update completed--" the hook runs indeed, but it never manage to run git pull properly: 6bfa32c..71c3d2a master -> master --initializing hook-- --prepare update-- fatal: Not a git repository: '.' Failed to find a valid git directory. --update completed-- so I'm asking myself now, how it's possible to make the hook update the clone with post-receive? in this case the user running the processes is the same, and its everything inside the user folder so I really don't understand...because if if I go manually into cd ~/websites/testing git pull it works without any problem... any help on that would be pretty much appreciated Thanks a lot

    Read the article

  • Git apache : unable to push via http

    - by GlinesMome
    I have to setup a server which can allow http vcs management (such as git and svn). svn support works well, but I have some trouble with git. Actual configuration: CentOS 5 Apache 2.2.8 Git 1.7.4.1 The /etc/httpd/conf/httpd.conf content: ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 10 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule mysql_auth_module modules/mod_auth_mysql.so LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2 PassengerRuby /usr/bin/ruby Include conf.d/*.conf User apache Group apache ServerAdmin aedi.admin@domain ServerName s1.domain UseCanonicalName Off DocumentRoot "/data/www/" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/data/www/"> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </IfModule> </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /data/www/s1/html ServerName s1.asso.domain ErrorLog logs/s1.error.log </VirtualHost> <VirtualHost *:80> DocumentRoot /data/www/s2/old ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> <VirtualHost *:443> DocumentRoot /data/www/s2/html ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> The /etc/httpd/conf.d/git.conf content: Alias /git /data/www/s2/git <Directory /data/www/s2/git> Options +Indexes DAV on SSLRequireSSL </Directory> Fine, every repository are created by the same way: git --bare init "$1.git" && cd "$1.git" && git update-server-info && chmod -R 770 . && cd .. && git clone `pwd`/"$1.git" && cd "$1" && echo 42 > answer && git add . && git commit -m "Initial commit" && git push origin master && git rm answer && git commit -a -m "Clean repository" && git push && cd .. && rm -Rf "$1" Then, on the client side, I try: ~ $ git clone https://s2.domain/git/repo.git Cloning into 'repo'... warning: You appear to have cloned an empty repository. ~ $ cd repo repo $ echo 42 > answer && git add . && git commit -m "init" && git push origin master [master (root-commit) a2aadb1] init 1 file changed, 1 insertion(+) create mode 100644 answer Fetching remote heads... refs/ refs/heads/ refs/tags/ updating 'refs/heads/master' from 0000000000000000000000000000000000000000 to a2aadb1772e12104ce358f7ff9a11db5d93ead7d sending 3 objects MOVE d81cc0710eb6cf9efd5b920a8453e1e07157b6cd failed, aborting (22/502) MOVE 2c186ad49fa24695512df5e41cb5e6f2d33c119b failed, aborting (22/502) MOVE a2aadb1772e12104ce358f7ff9a11db5d93ead7d failed, aborting (22/502) Updating remote server info fatal: git-http-push failed The apache associated logs: my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/info/refs?service=git-upload-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:48 +0200] "GET /git/repo.git/info/refs?service=git-receive-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/ HTTP/1.1" 207 569 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/info/refs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/objects/info/packs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/info/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/info/refs HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/objects/info/packs HTTP/1.1" 200 1 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/heads/ HTTP/1.1" 405 342 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/refs/heads/master HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/a2/ HTTP/1.1" 404 317 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/2c/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/d8/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/objects/a2/ HTTP/1.1" 201 296 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/refs/heads/master HTTP/1.1" 204 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/info/refs HTTP/1.1" 204 - "-" "git/1.7.11.4" I have tried many configurations (even smart http from progit), but a major part of them consider the fact that they have a dedicated domain, but I'm in a sub-directory, so I can't apply these examples. Have you got an idea of the problem? have you got solutions? have you got configuration example with non-root directory? For your help, In advance, Thanks.

    Read the article

  • git on HTTP with gitolite and nginx

    - by Arnaud
    I am trying to setup a server where my git repo would be accessible with HTTP(S). I am using gitolite and nginx (and gitlab for web interface but I doubt it makes any difference). I have searched the whole afternoon and I think I'm stuck. I have think I have understood that nginx needs fcgiwrap to work with gitolite, so I tried several configurations, but none of them work. My repositories are at /home/git/repositories. Here's the three nginx configurations I have tried. 1: location ~ /git(/.*) { gzip off; root /usr/lib/git-core; fastcgi_pass unix:/var/run/fcgiwrap.socket; include /etc/nginx/fcgiwrap.conf; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param DOCUMENT_ROOT /usr/lib/git-core/; fastcgi_param SCRIPT_NAME git-http-backend; fastcgi_param GIT_HTTP_EXPORT_ALL ""; fastcgi_param GIT_PROJECT_ROOT /home/git/repositories; fastcgi_param PATH_INFO $1; #fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; } Result: > git clone http://myservername/projectname.git test/ Cloning into test... fatal: http://myservername/projectname.git/info/refs not found: did you run git update-server-info on the server? and > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed 2: location ~ /git(/.*) { fastcgi_pass localhost:9001; include /etc/nginx/fcgiwrap.conf; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param GIT_HTTP_EXPORT_ALL ""; fastcgi_param GIT_PROJECT_ROOT /home/git/repositories; fastcgi_param PATH_INFO $1; } Result: > git clone http://myservername/projectname.git test/ Cloning into test... fatal: http://myservername/projectname.git/info/refs not found: did you run git update-server-info on the server? and > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed 3: location ~ ^.*\.git/objects/([0-9a-f]+/[0-9a-f]+|pack/pack-[0-9a-f]+.(pack|idx))$ { root /home/git/repositories/; } location ~ ^.*\.git/(HEAD|info/refs|objects/info/.*|git-(upload|receive)-pack)$ { root /home/git/repositories; fastcgi_pass unix:/var/run/fcgiwrap.socket; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param PATH_INFO $uri; fastcgi_param GIT_PROJECT_ROOT /home/git/repositories; include /etc/nginx/fcgiwrap.conf; } Result: > git clone http://myservername/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/projectname.git/info/refs fatal: HTTP request failed and > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed Also note that with any of those configurations, when I try to clone with a project name that actually doesn't exist, I get a 502 error. Does anyone already succeeded in doing this? What am I doing wrong? Thanks. UPDATE: nginx error log file said: 2012/04/05 17:34:50 [crit] 21335#0: *50 connect() to unix:/var/run/fcgiwrap.socket failed (13: Permission denied) while connecting to upstream, client: 192.168.12.201, server: myservername, request: "GET /git/oct_editor.git/info/refs HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "myservername" So I changed permissions for /var/run/fcgiwrap.socket, and now I have : > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 403 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed Here is the error.log file I have now: 2012/04/05 17:36:52 [error] 21335#0: *78 FastCGI sent in stderr: "Cannot chdir to script directory (/usr/lib/git-core/git/projectname.git/info)" while reading response header from upstream, client: 192.168.12.201, server: myservername, request: "GET /git/projectname.git/info/refs HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "myservername" I keep on investigating.

    Read the article

  • Redmine git integration - issue in accessing git from redmine but not from external git client

    - by Guruprasad
    I have setup redmine integration with apache as described in the redmine documentation. I have a /git path accessible with auth and /git-private accessible only to redmine. When I clone the repository through /git path, I get the up-to-date repo. But when I try to view it in redmine repo viewer, I get a 404 "The entry or revision was not found in the repository." error. Trying to clone using the git-private url in the redmine box gives a bare repository though it is the same repo as the one cloned by the /git path. I have enabled RedmineGitSmartHttp in the /git path. What could be the issue here? PerlLoadModule Apache::Redmine SetEnv GIT_PROJECT_ROOT /path/to/git/root SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/lib/git-core/git-http-backend/ <Location /git> AuthType Basic Require valid-user AuthName "Git" PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=<dbname>;host=<db host>" RedmineDbUser "<user>" RedmineDbPass "<password" RedmineGitSmartHttp yes </Location> <Location /git-private> Order deny,allow Deny from all <Limit GET PROPFIND OPTIONS REPORT> Options Indexes FollowSymLinks MultiViews Allow from <redmine public ip> Allow from <redmine pvt ip> Allow from <localhost> </Limit> </Location>

    Read the article

  • Using git submodules in a git-svn project

    - by Matthias
    In our git-svn managed project, we have 3 upstream projects that are all kept in native git repositories on GitHub. Since the source code of those upstream projects is under our control and changes frequently, our current solution, namely re-deploying the build artifacts to the super-project everytime we change something is quite cumbersome. What I'd like to have is this: parent project (git-svn): --> submodule 1 (git) --> submodule 2 (git) --> submodule 3 (git) That way, the source code for submodules 1-3 is compiled along with the sources for the super project, but I can push changes to submodules separately. The question is: what happens when I git svn dcommit on the parent project? Does this even work? UPDATE Hm, I just set up a simple project structure, trying to resemble this scenario, and I receive this error message when trying to dcommit on the superproject: a0301b11f3544a1e71067ff270eded65e4c8afbd doesn't exist in the repository at /opt/local/libexec/git-core/git-svn line 4775 Failed to read object a0301b11f3544a1e71067ff270eded65e4c8afbd at /opt/local/libexec/git-core/git-svn line 574 Any ideas/suggestions?

    Read the article

  • PHP remote development workflow: git, symfony and hudson

    - by user2022
    I'm looking to develop a website and all the work will be done remotely (no local dev server). The reason for this is that my shared hosting company a2hosting has a specific configuration (symfony,mysql,git) that I don't want to spend time duplicating when I can just ssh and develop remotely or through netbeans remote editing features. My question is how can I use git to separate my site into three areas: live, staging and dev. Here's my initial thought: public_html (live site and git repo) testing: a mirror of the site used for visual tests (full git repo) dev/ticket# : git branches of public_html used for features and bug fixes (full git repo) Version Control with git: Initial setup: cd public_html git init git add * git commit -m ‘initial commit of the site’ cd .. git clone public_html testing mkdir dev Development: cd /dev git clone ../testing ticket# all work is done in ./dev/ticket#, then visit www.domain.com/dev/ticket# to visually test make granular commits as necessary until dev is done git push origin master:ticket# if the above fails: merge latest testing state into current dev work: git merge origin/master then try the push again mark ticket# as ready for integration integration and deployment process: cd ../../testing git merge ticket# -m "integration test for ticket# --no-ff (check for conflicts ) run hudson tests visit www.domain.com/testing for visual test if all tests pass: if this ticket marks the end of a big dev sprint: make a snapshot with git tag git push --tags origin else git push origin cd ../public_html git checkout -f (live site should have the latest dev from ticket#) else: revert the merge: git checkout master~1; git commit -m "reverting ticket#" update ticket# that testing failed with the failure details Snapshots: Each major deployment sprint should have a standard name and should be tracked. Method: git tag Naming convention: TBD Reverting site to previous state If something goes wrong, then revert to previous snapshot and debug the issue in dev with a new ticket#. Once the bug is fixed, follow the deployment process again. My questions: Does this workflow make sense, if not, any recommendations Is my approach for reverting correct or is there a better way to say 'revert to before x commit'

    Read the article

  • git local master branch stopped tracking remotes/origin/master, can't push

    - by Paul Smith
    Just when I thought I'd got the hang of the git checkout -b newbranch - commit/commit/commit - git checkout master - git merge newbranch - git rebase -i master - git push workflow in git, something blew up, and I can't see any reason for it. Here's the general workflow, which has worked for me in the past: # make sure I'm up to date on master: $ git checkout master $ git pull # k, no conflicts # start my new feature $ git checkout -b FEATURE9 # master @ 2f93e34 Switched to a new branch 'FEATURE9' ... work, commit, work, commit, work, commit... $ git commit -a $ git checkout master $ git merge FEATURE9 $ git rebase -i master # squash some of the FEATURE9 ugliness Ok so far; now what I expect to see -- and normally do see -- is this: $ git status # On branch master # Your branch is ahead of 'origin/master' by 1 commit. # nothing to commit (working directory clean) But instead, I only see "nothing to commit (working directory clean)", no "Your branch is ahead of 'origin/master' by 1 commit.", and git pull shows this weirdness: $ git pull From . # unexpected * branch master -> FETCH_HEAD # unexpected Already up-to-date. # expected And git branch -a -v shows this: $ git branch -a -v FEATURE9 3eaf059 started feature 9 * master 3eaf059 started feature 9 remotes/origin/HEAD -> origin/master remotes/origin/master 2f93e34 some boring previous commit # should=3eaf059 git branch clearly shows that I'm currently on * master, and git log clearly shows that master (local) is at 3eaf059, while remotes/origin/HEAD - remotes/origin/master is stuck back at the fork. Ideally I'd like to know the semantics of how I might have gotten into this, but I would settle for a way to get my working copy tracking the remote master again & get the two back in sync without losing history. Thanks! (Note: I re-cloned the repo in a new directory and manually re-applied the changes, and everything worked fine, but I don't want that to be the standard workaround.) Addendum: The title says "can't push", but there's no error message. I just get the "already up to date" response even though git branch -a -v shows that local master is ahead of /remotes/origin/master. Here's the output from git pull and git remote -v, respectively: $ git pull From . * branch master -> FETCH_HEAD Already up-to-date. $ git remote -v origin [email protected]:proj.git (fetch) origin [email protected]:proj.git (push) Addendum 2: It looks as if my local master is configured to push to the remote, but not to pull from it. After doing for remote in 'git branch -r | grep -v master '; do git checkout --track $remote ; done, here's what I have. It seems I just need to get master pulling from remotes/origin/master again, no? $ git remote show origin * remote origin Fetch URL: [email protected]:proj.git Push URL: [email protected]:proj.git HEAD branch: master Remote branches: experiment_f tracked master tracked Local branches configured for 'git pull': experiment_f merges with remote experiment_f Local refs configured for 'git push': experiment_f pushes to experiment_f (up to date) master pushes to master (local out of date)

    Read the article

  • Maintain set of local commits working with git-svn

    - by benizi
    I am using git to develop against a project hosted in subversion, using git-svn: git svn clone svn://project/ My general workflow has been to repeatedly edit-and-commit on the master branch, then commit to the svn repository via: git stash git svn dcommit git stash apply One of the local modifications that 'stash' command is preserving, that I don't want to commit to the svn repository, is a changed database connection string. What's the most convenient way to keep this local change without the extra 'stash' steps? I suspect that something like 'stash' or 'quilt' is what I'm looking for, but I'm still new enough to git that I think I'm missing some terminology that would lead to the exact incantation. Update: The only solution I found that seems to avoid the git stash + git-svn action + git stash apply series was to update the git-svn ref manually: (check in local-only change to 'master', then...) $ cat .git/refs/master > .git/refs/remote/git-svn $ git svn fetch (with at least one new SVN revision) And that leaves the local-only commit as a weird (probably unsafe) commit between two svn revisions.

    Read the article

  • git problems installing stuff [closed]

    - by dale
    root@Frenzen:~# cd root@Frenzen:~# git clone --depth 1 git://source.ffmpeg.org/ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ root@Frenzen:~# cd root@Frenzen:~# git clone --depth 1 git://source.ffmpeg.org/ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ root@Frenzen:~# git clone git://source.ffmpeg.org/ffmpeg.git ffmpeg Initialized empty Git repository in /root/ffmpeg/.git/ cd root@Frenzen:~# wget "http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz" -O ffmpeg-snapshot.tar.gz --2012-10-05 05:43:55-- http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz Resolving git.videolan.org... 2a01:e0d:1:3:58bf:fa76:0:1, 88.191.250.118 Connecting to git.videolan.org|2a01:e0d:1:3:58bf:fa76:0:1|:80... root@Frenzen:~# cd root@Frenzen:~# wget "http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz" -O ffmpeg-snapshot.tar.gz --2012-10-05 05:44:17-- http://git.videolan.org/?p=ffmpeg.git;a=snapshot;h=HEAD;sf=tgz Resolving git.videolan.org... 2a01:e0d:1:3:58bf:fa76:0:1, 88.191.250.118 Connecting to git.videolan.org|2a01:e0d:1:3:58bf:fa76:0:1|:80...

    Read the article

  • msysgit git-am can't apply it's own git format-patch sequence

    - by Andrian Nord
    I'm using msysgit git on windows to operate on central svn repository. I'm using git as I want to have it's awesome little local branches for everything and rebasing on each other. I also need to update from central repo often, so using separate svn/git is not an option. Problem is - git svn --help (man page) says that it is not a good idea to use git merge into master branch (which is set to track from svn's trunk) from local branches, as this will ruin the party and git svn dcommit would not work anymore. I know that it's not exactly true and you may use git merge if you are merging from branch which was properly rebased on master prior merge, but I'm trying to make it safer and actually use git format-patch and git am. We are using code review, so I'm making patches anyway. I also knew about git cherry-pick, but I want to just git am /reviewed/patches/dir/* without actually recalling what commits was corresponding to this patches (without reading patches, that is). So, what's wrong with git svn and git am? It's simple - git am for a few very hard points is doing CRLF into LF conversion for patches supplied (git-mailsplit is doing this, to be precise), if not rebasing. git format-patch is also producing proper (LF-ended) patches. As my repo is mostly CRLF (and it should remain so), patches are, obviously, failing due to wrong EOL. Converting diffs to CRLF and somehow hacking git am to prevent it from conversion is not working, too. It will fail if any file was removed or deleted - git apply will complain about expected /dev/null (but he got /dev/null^M). And if I'm applying it with git am --ignore-space-change --ignore-whitespace that it will commit LF endings straight to the index, which is also weird. I don't know if it will preserve over commiting into svn (via git svn dcommit) and checking it out and I don't want to try out. Of course, it's still possible to try hacking around patches to convert only actual diffs, but this is too much hacks for simple task. So, I wonder, is there really no established way to produce patches and apply them to the same repo on the same system? It just feels weird that msysgit can't apply it's own patches.

    Read the article

  • Git subtree workflow

    - by Cedric
    In my current project I'm using an open source forum (https://github.com/vanillaforums/Garden.git). I was planning on doing something like this : git remote add vanilla_remote https://github.com/vanillaforums/Garden.git git checkout -b vanilla vanilla_remote/master git checkout master git read-tree --prefix=vanilla -u vanilla This way I can make change into the vanilla folder (like changing config) and commit it to my master branch and I can also switch into my vanilla branch to fetch updates. My problem is when I try to merge the branch together git checkout vanilla git pull git checkout master git merge --squash -s subtree --no-commit vanilla The problem is that the "update commit" goes on top of my commits and "overwrite" my change. I would rather like to have my commits replay on top of the update. Is there a simple way to do that? I'm not very good in git so maybe this is the wrong approach. Also, I really don't want to mix my history with the vanilla history.

    Read the article

  • Cloning git repository from svn repository, results in file-less, remote-branch-less git repo.

    - by Tchalvak
    Working SVN repo I'm starting a git repo to interact with a svn repo. The svn repository is set and working fine, with a single commit of a basic README file in it. Checking it out works fine: tchalvak:~/test/svn-test$ svn checkout --username=myUsernameHere http://www.url.to/project/here/charityweb/ A charityweb/README Checked out revision 1. Failed git-svn clone of svn repo When I try to clone the repository in git, the first step shows no errors... tchalvak:~/test$ git svn clone -s --username=myUserNameHere http://www.url.to/project/here/charityweb/ Initialized empty Git repository in /home/tchalvak/test/charityweb/.git/ Authentication realm: <http://www.url.to/project/here:80> Charity Web Password for 'myUserNameHere': ...but results in a useless folder: tchalvak:~/test$ ls charityweb tchalvak:~/test$ cd charityweb/ tchalvak:~/test/charityweb$ ls tchalvak:~/test/charityweb$ ls -al total 12 drwxr-xr-x 3 tchalvak tchalvak 4096 2010-04-02 13:46 . drwxr-xr-x 4 tchalvak tchalvak 4096 2010-04-02 13:46 .. drwxr-xr-x 8 tchalvak tchalvak 4096 2010-04-02 13:47 .git tchalvak:~/test/charityweb$ git branch -av tchalvak:~/test/charityweb$ git status # On branch master # # Initial commit # nothing to commit (create/copy files and use "git add" to track) tchalvak:~/test/charityweb$ git fetch fatal: Where do you want to fetch from today? tchalvak:~/test/charityweb$ git rebase origin/master fatal: bad revision 'HEAD' fatal: Needed a single revision invalid upstream origin/master tchalvak:~/test/charityweb$ git log fatal: bad default revision 'HEAD' How do I get something I can commit back to? I expect I'm doing something wrong in this process, but what?

    Read the article

  • Host your own private git repository via SSH

    - by kerry
    If you are like me you have tons of projects you would like to keep private but track with git, but do not want to pay a git host for a private plan. One of the problems is that most hosts scale their plans by project instead of users. Luckily, it is easy to host your own git repositories on any el cheapo host that provides ssh access. In the interest of full disclosure, I learned this trick from this blog post. I decided to recreate it in case the source material vanishes for some reason. To setup your host, login via ssh and run the following commands: mkdir ~/git/yourprojectname.git cd ~/git/yourprojectname.git git --bare init Then in your project directory (on your local machine): # setup your user info git config --global user.name "Firstname Lastname" git config --global user.email "[email protected]" # initialize the workspace git init git add . git commit -m "initial commit" git add remote origin ssh://[email protected]/~/git/yourprojectname.git git push origin master It’s that easy! To keep from entering your password every time add your public key to the server: Generate your key with ‘ssh-keygen -t rsa‘ on your local machine.  Then add the contents of the generated file to ~/.ssh/authorized_keys on your server.

    Read the article

  • Mirroring git and mercurial repos the lazy way

    - by Greg Malcolm
    I maintain Python Koans on mirrored on both Github using git and Bitbucket using mercurial. I get pull requests from both repos but it turns out keeping the two repos in sync is pretty easy. Here is how it's done... Assuming I’m starting again on a clean laptop, first I clone both repos ~/git $ hg clone https://bitbucket.org/gregmalcolm/python_koans ~/git $ git clone [email protected]:gregmalcolm/python_koans.git python_koans2 The only thing that makes a folder a git or mercurial repository is the .hg folder in the root of python_koans and the .git folder in the root of python_koans2. So I just need to move the .git folder over into the python_koans folder I'm using for mercurial: ~/git $ rm -rf python_koans/.git ~/git $ mv python_koans2/.git python_koans ~/git $ ls -la python_koans total 48 drwxr-xr-x 11 greg staff 374 Mar 17 15:10 . drwxr-xr-x 62 greg staff 2108 Mar 17 14:58 .. drwxr-xr-x 12 greg staff 408 Mar 17 14:58 .git -rw-r--r-- 1 greg staff 34 Mar 17 14:54 .gitignore drwxr-xr-x 13 greg staff 442 Mar 17 14:54 .hg -rw-r--r-- 1 greg staff 48 Mar 17 14:54 .hgignore -rw-r--r-- 1 greg staff 365 Mar 17 14:54 Contributor Notes.txt -rw-r--r-- 1 greg staff 1082 Mar 17 14:54 MIT-LICENSE -rw-r--r-- 1 greg staff 5765 Mar 17 14:54 README.txt drwxr-xr-x 10 greg staff 340 Mar 17 14:54 python 2 drwxr-xr-x 10 greg staff 340 Mar 17 14:54 python 3 That’s about it! Now git and mercurial are tracking files in the same folder. Of course you will still need to set up your .gitignore to ignore mercurial’s dotfiles and .hgignore to ignore git’s dotfiles or there will be squabbling in the backseat. ~/git $ cd python_koans/ ~/git/python_koans $ cat .gitignore *.pyc *.swp .DS_Store answers .hg <-- Ignore mercurial ~/git/python_koans $ cat .hgignore syntax: glob *.pyc *.swp .DS_Store answers .git <-- Ignore git Because both my mirrors are both identical as far as tracked files are concerned I won’t yet see anything if I check statuses at this point: ~/git/python_koans $ git status # On branch master nothing to commit (working directory clean) ~/git/python_koans $ hg status ~/git/python_koans But how about if I accept a pull request from the bitbucket (mercuial) site? ~/git/python_koans $ hg status ~/git/python_koans $ git status # On branch master # Your branch is behind 'origin/master' by 1 commit, and can be fast-forwarded. # # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: python 2/koans/about_decorating_with_classes.py # modified: python 2/koans/about_iteration.py # modified: python 2/koans/about_with_statements.py # modified: python 3/koans/about_decorating_with_classes.py # modified: python 3/koans/about_iteration.py # modified: python 3/koans/about_with_statements.py Mercurial doesn’t have any changes to track right now, but git has changes. Commit and push them up to github and balance is restored to the force: ~/git/python_koans $ git commit -am "Merge from bitbucket mirror: 'gpiancastelli - Fix for issue #21 and some other tweaks'" [master 79ca184] Merge from bitbucket mirror: 'gpiancastelli - Fix for issue #21 and some other tweaks' 6 files changed, 78 insertions(+), 63 deletions(-) ~/git/python_koans $ git push origin master Or just use hg-git? The github developers have actually published a plugin for automatic mirroring: http://hg-git.github.com I haven’t used it because at the time I tried it a couple of years ago I was having problems getting all the parts to play nice with each other. Probably works fine now though..

    Read the article

  • Reset the controls within asp placeholder

    - by alaa9jo
    I use placeholders very much in many projects,but in one of the projects I was asked to reset the controls within a specific placeholder to their original state after the user has finished from inserting his/her data. As everyone of us know,to keep the controls within a placeholder from disappearing after postbacks you have to recreate them,we add such a code in i.e. page_load,the controls will be recreated and their values will be loaded from viewstate (for some of them like textbox,checkboxs,..etc) automatically,that placeholder contains only textboxs so what I need is to block/ loading/clear that viewstate after inserting the data. First thought: Customizing placeholder I thought about it and tried overriding many methods but no success at all...maybe I'm missing something not sure. Second thought: recreate the controls 2 times: In page_load,I recreate the controls within that placeholder then in button click (the button that saves user's data) I recreate them once more and it worked! I just thought of sharing my experience in that case with everyone in case anyone needed it,any better suggestion(s) is welcomed.

    Read the article

  • Git checkout doesn't change anything, and it's getting very frustrating

    - by Josh
    I really like git. At least, I like the idea of git. Being able to checkout my master project as a separate branch where I can change whatever I want without risk of screwing everything else up is awesome. But it's not working. Every time I checkout a branch to another branch, make changes to the one branch, and then checkout the original branch, I still have all the files and changes that happened in the other branch. This is getting extremely frustrating. I've read that this can happen when you have files open in the IDE while doing this, but I've been pretty careful about that and both closed the files in the IDE, closed the IDE, and shut down my rails server before switching branches, and this still happens. Also, running 'git clean -f' either deletes everything that happened after some arbitrary commit (and randomly, at that), or, as in the latest case, didn't change anything back to its original state. I thought I was using git correctly, but at this point, I'm at my wit's end here. I'm trying to work with a bunch of experimental code using a stable version of my project, but I keep having to manually track down and fix all the changes I made. Any ideas or suggestions? git checkout -b photo_tagging git branch # to make sure it's right # make a bunch of changes, creations, etc git status # see what's changed since before git add . # approve of the changes, I guess, since if I do git commit after this, it says no changes git commit -m 'these are changes I made' git checkout master git branch #=> *master # look at files, tags_controller is still there, added in photo_tagging # and code added in photo_tagging branch are still there in *master This seems to happen whether I do a commit or not on the branch.

    Read the article

  • git | error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied [SOLVED]

    - by Corbin Tarrant
    I am having a strange issue that I can't seem to resolve. Here is what happend: I had some log files in a github repository that I didn't want there. I found this script that removes files completely from git history like so: #!/bin/bash set -o errexit # Author: David Underhill # Script to permanently delete files/folders from your git repository. To use # it, cd to your repository's root and then run the script with a list of paths # you want to delete, e.g., git-delete-history path1 path2 if [ $# -eq 0 ]; then exit 0are still fi # make sure we're at the root of git repo if [ ! -d .git ]; then echo "Error: must run this script from the root of a git repository" exit 1 fi # remove all paths passed as arguments from the history of the repo files=$@ git filter-branch --index-filter "git rm -rf --cached --ignore-unmatch $files" HEAD # remove the temporary history git-filter-branch otherwise leaves behind for a long time rm -rf .git/refs/original/ && git reflog expire --all && git gc --aggressive --prune I, of course, made a backup first and then tried it. It seemed to work fine. I then did a git push -f and was greeted with the following messages: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything seems to have pushed fine though, because the files seem to be gone from the GitHub repository, if I try and push again I get the same thing: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything up-to-date EDIT $ sudo chgrp {user} .git/logs/refs/remotes/origin/master $ sudo chown {user} .git/logs/refs/remotes/origin/master $ git push Everything up-to-date Thanks! EDIT Uh Oh. Problem. I've been working on this project all night and just went to commit my changes: error: Unable to append to .git/logs/refs/heads/master: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/refs/heads/master sudo chgrp {user} .git/logs/refs/heads/master I try the commit again and I get: error: Unable to append to .git/logs/HEAD: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/HEAD sudo chgrp {user} .git/logs/HEAD And then I try the commit again: 16 files changed, 499 insertions(+), 284 deletions(-) create mode 100644 logs/DBerrors.xsl delete mode 100644 logs/emptyPHPerrors.php create mode 100644 logs/trimXMLerrors.php rewrite public/codeCore/Classes/php/DatabaseConnection.php (77%) create mode 100644 public/codeSite/php/init.php $ git push Counting objects: 49, done. Delta compression using up to 2 threads. Compressing objects: 100% (27/27), done. Writing objects: 100% (27/27), 7.72 KiB, done. Total 27 (delta 15), reused 0 (delta 0) To [email protected]:IAmCorbin/MooKit.git 59da24e..68b6397 master -> master Hooray. I jump on http://GitHub.com and check out the repository, and my latest commit is no where to be found. ::scratch head:: So I push again: Everything up-to-date Umm...it doesn't look like it. I've never had this issue before, could this be a problem with github? or did I mess something up with my git project? EDIT Nevermind, I did a simple: git push origin master and it pushed fine.

    Read the article

  • Can't clone gitosis-admin.git local from my snow leopard server running gitosis

    - by joggink
    I've installed gitosis as described here: http://gist.github.com/264304 One of the things that I had to adjust was to give my git user permissions to use ssh (which I did trough server admin - access - ssh and added the 'git' user). When I ssh from my local machine (mac osx) as the git user, I get this response: PTY allocation request failed on channel 0 bash: gitosis-serve: command not found Connection to 10.0.0.108 closed. Which I think is normal, because in Pro GIT the author says you should get something like this if you try ssh'ing to the server using your git user: PTY allocation request failed on channel 0 fatal: unrecognized command 'gitosis-serve schacon@quaternion' Connection to gitserver closed. So far so good, I think? Now when I try to clone my gitosis-admin.git repository using this command: $git clone [email protected]:gitosis-admin.git I get this: Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ bash: gitosis-serve: command not found fatal: The remote end hung up unexpectedly So after doing some searching, I found an answer here on serverfault claiming I should use ssh:// as protocol for my git clone (which I thought is the default git protocol?) However, when I try: $git clone ssh://[email protected]:gitosis-admin.git This is the response: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: Password: Password: Permission denied (publickey,keyboard-interactive). fatal: The remote end hung up unexpectedly When I type in my own password (because my git user has no password), I get following error: The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: bash: git-upload-pack: command not found fatal: The remote end hung up unexpectedly I added my upload-pack location as followed: $git clone -u /usr/local/git/bin/git-upload-pack ssh://[email protected]:gitosis-admin.git I get the error that gitosis-admin.git isn't a git repo... Initialized empty Git repository in /Users/joggink/gitosis-admin/.git/ The authenticity of host ' (::1)' can't be established. RSA key fingerprint is 80:4d:77:c7:78:cb:c9:42:e3:82:06:7c:fe:c0:08:ce. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '' (RSA) to the list of known hosts. Password: fatal: '[email protected]:gitosis-admin.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly I've been searching for a solution for almost a week now, and every topic I've found on the internet gives no result...

    Read the article

  • How to use crontab, .netrc, and git push?

    - by Jon
    Hi all, I am in the process of automating the backups from various servers to a central point then pushing those config changes into a git repo so i can track any changes over time. The rest of the scripts are working well, I can copy / rsync the files across the network to a central point. The last script is to get the config files to be put into / updated in repository. The script is as follows: #!/bin/bash clear SERVERNAME="betty" SCRIPTDIR="/home/jon" GITROOT="/tmp/git" TEMPROOT="/tmp/backups" BACKUPROOTDIR="/mnt/backups" echo " - running as user: $UID" echo "backingup git config on $SERVERNAME" echo "" # check to see if root backup folder exists, otherwise create it. if [ -d $GITROOT ]; then rm -rf $GITROOT fi mkdir $GITROOT cd $GITROOT echo " - testing if home is where I think it should be!" echo $HOME echo " - testing if it can see netrc" tail $HOME/.netrc git clone http://192.168.10.97:8000/repositories/HOH-config-backups.git cd HOH-config-backups echo " - copy Configuration Folders across" cp -r $BACKUPROOTDIR/Configuration/* $GITROOT/HOH-config-backups/ cp -r $BACKUPROOTDIR/scripts $GITROOT/HOH-config-backups/ git add . git commit -a -m "committing any new configuration changes!" git push origin master echo "" echo "Git repo updated" echo "" echo " - backing up this script" FIREWIGSCRIPTLOC="$BACKUPROOTDIR/scripts/$SERVERNAME" if [ ! -d $FIREWIGSCRIPTLOC ]; then mkdir $FIREWIGSCRIPTLOC fi cp /home/jon/gitConfig.sh $FIREWIGSCRIPTLOC The git repo is on a different machine in the network using Apache and HTTP-backend.exe (smart HTTP protocol). If I run this script as me "jon" it works. If I run it in crontab it fails. git uses the /home/jon/.netrc file for authentication: machine 192.168.10.97 login gitconfig password 1234579 The log from crontab is: TERM environment variable not set. - running as user: 1000 backingup git config on betty - testing if home is where I think it should be! /home/jon - testing if it can see netrc machine 192.168.10.97 login gitconfig password 1234579 got 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd walk 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd got be880f2d306778a538d592e7a02eb19f416612f7 got bd387e8def9f77aafa798bf53e80d949aba443e8 got 1bc1a59e12775841d4c59d77c63b8a73823138c2 walk bd387e8def9f77aafa798bf53e80d949aba443e8 Getting alternates list for http://192.168.10.97:8000/repositories/HOH-config-backups.git got 030512237bca72faf211e0e8ec2906164eac34f6 got 9bc2f575240bc1f61ff7d69777ce1a165d06b184 got b8400f7f01429104a9d4786a6bb1a16d293e37c1 got 2403b5bf611010e0b401f776f0e23b09ce744838 got 1a27944c48269ef3608a8f2466e43402d06faac0 got b686f45b7d57af4fa8ca0d528bb85216d6247e19 Getting pack list for http://192.168.10.97:8000/repositories/HOH-config-backups.git Getting index for pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff Getting pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff which contains ff84d6d48e9326066438d167a10251218d612b3d walk b686f45b7d57af4fa8ca0d528bb85216d6247e19 got 364e30daec17814073e668f490bb84af891fe1f7 got 23f6497e7f9b80e0d90adad73bd0407a0e5ac6ce got 9e77c47574b5e23ea669afe0c23ab235e4917ee1 got 6654e0d328a216b3783e98c47206cb2d01b3353d got 28821ffd437d2689ffb82c6e4b9c3f5372c95c4b got 8c384a24f645389e4d4b08013c79e9e73a658342 got d203be0123736ee025ce20c081f1489098648dfc got 1852603bf7709e71417d8ccec02390279d533642 got fb753a26b20b04694419fce8ecdaa8dbec105cf1 got 736028997cd84dd1c135f57e9d246674b9cd0b9d got 7af836249e20096d0476a548d5be702a071cdd4b got 240dc39d9db50df63073fc7927b2d002dfa0f54c got 93abd36e3935a01011eb753b635a1a0e984bf31e got c6269e28fecf4d8d0d98b9358aecb3acff02df44 got b0aa29432f73e64032682a351d436c24b14078ab walk 240dc39d9db50df63073fc7927b2d002dfa0f54c got 58fb66d9f35f8a5e32ff4683309c5f0c2a3a03c5 got 0da2def4de0565483cdbe6b87418ee2beb122e58 got 0f6a86c6f87ed52ad2ed01e5c6edd661d364930c got 437a93d27b5bb89c739a0564a34a616e832c3ebe got fe0385abe5c0acd8462268dac330bae00e934f1b got 24259f8f5c5c9ee974a75fe3d1e07c02e3e20fe9 got d29f624bf1a5eceedaa86c10fee35f62747c7d04 got 0154e4c987132585ea7a92b77d02dba285512d6b got eda8bf526567c25ee70addb2ad3c3c6aa57eac77 got 9f3d9d7262d66f9fa4f6a13b7c86199953f4bc4e got 8e20881e19667aa22245d0598646991067455a4d got abb1123145689b35eb19519952c71253ee45fa98 got dfeff593c79b4156ce2ce1adf043d0e80356488c got e20c5b48b1d360e0bcf34189e3f3d2bbf23e92cc got b13eb81cc274780322ecf786372320343926bec9 walk 8de83868b3fac748b0a55eba16c8f668ec852abb got b5961421bbc42afe7a07cc1c8b615aba26ba74d7 got 2650ba819019df4193b482733e29ca79b29f3f2c got b3111e1be8103e91803a97a817ed81f28025aca1 got b060be934d709684f5eb5dad3c03932a3589e864 got cf70d2043f081d7a4438e9d5a290a9f986c84060 got 80bf0f1cc836feab86d6935bb7968d8555a8d531 got da318d167920e34bc6573e4fc236249ccbbee316 got d82ac853d387b760149599e6e1ab96403f6ec672 got 0005f691d1f46550fdb4e56025f52e30a5b18cc2 Initialized empty Git repository in /tmp/git/HOH-config-backups/.git/ - copy Configuration Folders across Created commit 424df2f: committing any new configuration changes! 3 files changed, 55 insertions(+), 1 deletions(-) create mode 100755 scripts/betty/gitConfig.sh error: Cannot access URL http://192.168.10.97:8000/repositories/HOH-config-backups.git/, return code 22 error: failed to push some refs to 'http://192.168.10.97:8000/repositories/HOH-config-backups.git' Git repo updated - backing up this script cp: cannot create regular file `/mnt/backups/scripts/betty/gitConfig.sh': Permission denied my crontab is: # m h dom mon dow command 04 * * * * /home/jon/gitConfig.sh > /tmp/gitconfig.log 2>&1 I open it by doing: $crontab -e i.e. not as root. I am a bit confused as to why it is not running as my user (or what user id 1000 is). Not sure what I need to do to get the push with git to work within crontab. edit: found out about the userid: jon@betty:~$ id uid=1000(jon) gid=1000(jon) groups=4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),114(lpadmin),115(admin),1000(jon) here is my $HOME/.gitconfig file: [user] name = Jon Hawkins email = [email protected] Thanks

    Read the article

  • Git: can't undo local changes (error: path ... is unmerged)

    - by mklhmnn
    I have following working tree state $ git status foo/bar.txt # On branch master # Unmerged paths: # (use "git reset HEAD <file>..." to unstage) # (use "git add/rm <file>..." as appropriate to mark resolution) # # deleted by us: foo/bar.txt # no changes added to commit (use "git add" and/or "git commit -a") File foo/bar.txt is there and I want to get it to the "unchanged state" again (similar to 'svn revert'): $ git checkout HEAD foo/bar.txt error: path 'foo/bar.txt' is unmerged $ git reset HEAD foo/bar.txt Unstaged changes after reset: M foo/bar.txt Now it is getting confusing: $ git status foo/bar.txt # On branch master # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # new file: foo/bar.txt # # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: foo/bar.txt # The same file in both sections, new and modified? What should I do? Thanks in advance.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >