Search Results

Search found 716 results on 29 pages for 'gokhan nas'.

Page 1/29 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Copying files from NAS to NAS drives

    - by user1001421
    Very simple question. I've got 2 NAS drive that are "wire" connected via a router. If I have a wireless laptop and request a large amount of data be copied from one NAS drive to the other, does the network traffic go direct from the one drive to the other, going via the wired network, or does the network traffic go via my laptop, if you see what I mean. IE. From the NAS drives wired network, to the wireless network and then back to the wired network. Is this a common bottle-neck when copying a large amount of data? And if so, is there a way to avoid it. Thanks.

    Read the article

  • Backup NAS to another NAS?

    - by Tronic
    hey there, is there a way to backup / transfer a NAS (it's like a big harddrive with some access to a webinterface, but closed linux etc.... only two ethernet ports) to another one? or is the only way to connect both NASs to my computer and copy the data from one to the other? it's like 750gb of data... thanks in advance... regards

    Read the article

  • Thoughts on home NAS server

    - by user826955
    I currently have a NAS with a 2x2TB HDD 1x16GB SSD layout on a mini-itx atom board. The NAS is in a Lian Li PC-Q07 case. On this system I was running freebsd 8 with a gmirror raid 1 setup, which was enough for my needs. So far I was using the NAS for: Fileserver with AFP protocol (only mac clients used) SVN server hosting all my source trees of my projects JIRA (performance was okay-ish) Timemachine backup for the macs The power consumption was about 38W, although I did not put HDDs asleep when unused (I think this is not possible in a raid setup). I liked the NAS because: the performance was good through gigabit LAN (enough for my needs) power consumption was good its a pretty small case and fits in one of my cupboards I disliked the NAS a bit because: it was a bit noisy, the Q07 case vibrated a good amount because of the HDDs. I switched the NAS off every evening I do not have a real backup of the data on the NAS, only the internal raid 1 as safety. I really dont want to loose my source trees under no circumstances, so I would really be sleeping better if I knew I had regular backups somewhere. Recently, the board seemed to have died, I can't boot anymore. Thus, I was thinking about a redesign of my NAS (I still have to find out what parts are broken, I probably need to replace the mainboard and SSD. HDDs seem to be okay). First of all, I was wondering what other users have as backup for their NAS? Are you actually using a second NAS, and regularly copying over the data to have it safe? Or is there any better solution to this? I was thinking about getting a cheap NAS like the synology DS112j with only one disk, and use rsync or something similar to regularly copy data over to the second NAS (wake the second NAS upon start, shut it down after copy). Although this approach seems somewhat weird, It would have the benefit (?) that I could use a single disk instead of raid in the main NAS, and put the disk asleep when idle, and have the NAS running 24/7 with low energy consumption (I found no way to do this with a gmirror setup). Is there any recommended backup solution for a small NAS? Then I was thinking about a different raid setup. Since I have to buy a new mainboard as well as SSD, I might as well switch over to a i3 board with more ram, and also switch to ZFS. I am not familar with ZFS, I've never used it, but I read and hear much about it. Would it be viable to set up a ZFS storage with only 2 disks? Can I easily extend this storage with more disks, once I choose to add some? I could maybe get a new case like the Fractal Design Array R2 which has more 3,5" slots. I could as well get another 2 disks, but I would prefer sticking with the existing 2 for enegery/heat/noise reasons. Should I go for a ZFS storage or stick to my gmirror setup? I would also like to keep freebsd as operating system, and also I dont need any web gui or something (that is, I dont need/want to use FreeNAS or Openfiler etc). Does anyone maybe have a sample setup in use so I can compare energy consumption/noise/software setup? Any guidance towards the NAS of my dreams (silent, low energy, safe w/ backups) much appreciated.

    Read the article

  • How can Nautilus autodiscover a NAS?

    - by Private
    I have two machines: a 12.10 which autodiscovers my NAS fine and a 13.04 which does not autodiscover the NAS in Nautilus. The latter does not display the drive in Nautilus. I did install samba on the 13.04, I think a while ago, but I cannot remember what I did. Before I connected to the drive using afp, now I notice the 12.10 uses smb. How can I make my 13.04 autodiscover the NAS and how should I configure it?

    Read the article

  • Upgrading NAS hard drives

    - by Mihai Damian
    I was thinking of buying a NAS for home-usage. I've never used a NAS or had HDDs set up in Raids. Before I commit myself to moving all my data to a NAS I need to find out how difficult it is to upgrade and replace the NAS' hard drives. Suppose I set up a Raid 1 NAS with two 1TB hdds. At some point in the future I will use up all the space and will have to install two new 2TB hdds. Now I'll need to migrate the data from the old disks to the new ones. Will I have to hook up one of the old disks in a computer and copy all the data back in the NAS? Or can the migration be done using only the NAS? I realize the answer to the question might depend on the NAS model. Being a simple for-home solution I was thinking of getting something along the lines of D-link's 323.

    Read the article

  • How do I build a DIY NAS?

    - by Kaushik Gopal
    I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • How do I built a DIY NAS?

    - by Kaushik Gopal
    I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • Lost contact with my NAS after changing its IP

    - by Beles
    I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

    Read the article

  • Simple NAS setup for Ubuntu

    - by Sean Houlihane
    So, I want to connect my shiny new NAS (QNAP TS-210p II) to my Ubuntu 11.10 box. I have a 2nd Ubuntu machine, but I don't use that enough to be too worried about it. Use is ideally to offload all storage except for system (which can then run off a 30GB flash drive). The main machine also runs Myth front/backends. Both are on a wired network currently. I have got a basic setup working, mounted over NFS, but have some issues, and whenever I look for answers, I seem to get unto the UbuntuServer domain, with what seems like more detail than I want in an answer. Questions I have identified so far: 1) Sharing UIDs to get file permissions correct. LDAP or something else? What is necessary to make this work? 2) Mounting an NFS device reliably. Do I just add it in fstab or is some sort of auto-mount advisable? Its a wired network, but I shouldn't need to worry about reboot after power-outages and sequencing...

    Read the article

  • Which process is using my NAS?

    - by sethu
    I have a nas connected to my cluster. The NAS holds all our home directories. When I did a set of experiments last week, saving a 1 GB file to the nas took around 30 seconds. If i do the same to a local disk it takes 18 seconds. But when I tried doing the same process today, it takes 150 seconds. I am unsure what is the problem . Can someone help me pointout the issue? Is it possible to find out which process is accessing the NAS or how much NAS bandwidth is getting used ? Thanks for your help. -Sethu

    Read the article

  • Looking for detailed Instructions on building a DIY NAS

    - by Kaushik Gopal
    I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • Links to detailed instructions on building a DIY NAS

    - by Kaushik Gopal
    I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

    Read the article

  • NAS disk - problem with accessing SAMBA

    - by dominolog
    Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

    Read the article

  • Increase backup speed, Backup Exec 2010 - QNAP TS419U+ NAS

    - by user99912
    We have a QNAP NAS and the network shares are being backed up by Backup Exec 2010 over SMB. We can't install the remote agent on the NAS as it has an ARM processor and, as far as I am aware, there is no compatible agent. Do you have any suggestions on any faster method of backing up these shares as opposed to the current scenario? Currently the network bandwidth is not the issue, it seems that this access method is just not able to go any quicker. We've also added the NAS shares to the start of the selection list, but we're still running into 18 hours total backup time (total amount of data on the NAS is roughly 650GB). Any comments and/or suggestions welcome. EDIT: Data is being pulled from the NAS by Backup Exec to a LTO4 tape drive

    Read the article

  • Sabnzbd Installed on Linux NAS

    - by Mike Szp.
    I installed SABnzbd on a linux formatted NAS. Now the directory it downloads to is mapped differently on the NAS itself, because the path that SABnzbd knows about starts in it's own folder. If this sounds confusing let me give you an example: \\MYNAS\Volume_1\ That is the path of the drive on the NAS. I would like my SABnzbd downloads to go to: \\MYNAS\Volume_1\Downloads Right now SABnzbd is installed to: \\MYNAS\Volume_1\ffp\opt\optware\share\SABnzbd And the default download directory (as indicated in SABnzbd is): /ffp/opt/optware/share/SABnzbd/downloads/complete I know that the mapping is different somehow because It is installed on the NAS, but I just am lost as to what I should do. So far, I have tried for the complete folder: /192.168.restofip/Volume_1/downloads/complete /Volumes/Volume_1/downloads/complete /Volume_1/downloads/complete Does anyone know how to change the path so that I can have it download to one of the topmost folders on the NAS instead of having it download to a folder so deep in the drive?

    Read the article

  • Seasgate GoFlex NAS + Horrible Speed = Bad Experience

    - by Jon H
    I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

    Read the article

  • Looking for USB Network Attached Storage (NAS) Adapter that supports multiple drives, NTFS/FAT32 fil

    - by braveterry
    I'm looking for a NAS Adapter that supports attaching multiple USB devices to the network. Here's what I'd like to see in a NAS adapter: Under $100.00. Support for multiple devices. This can be through a USB hub or through multiple USB connectors on the device itself. Bittorrent support would be nice, but this isn't a deal-breaker. Filesystem support for at least NTFS or FAT32. I'd prefer to not have to reformat to use the device, but this is also not a deal-breaker. Here is what I am NOT looking for: I'm NOT looking for a NAS enclosure. I already have a couple of spare external USB drives that I'd like to use. I'm NOT looking for a networked USB hub like the one mentioned here. Network USB hubs only allow access to a drive from one PC at a time. I'm NOT looking for a wireless router with a NAS built in. I already have a wireless router, and I'd rather not go through the hassle of replacing it if possible. What I've looked at so far PogoPlug: This supports multiple devices via a USB hub, but there's not Bittorrent support. It's $99.00, so I may end up going with this and hope that they patch in Bittorrent support later. Addonics NAS Adapter: This supports only one device per adapter, so it's a non-starter. SimpleNET NAS Head USB 2.0 Portable Dongle: I'm not 100% sure this supports multiple devices. Plus there doesn't seem to be any Bittorrent support. I'll try to update this post as I explore other devices.

    Read the article

  • DIY NAS - links for Instructions

    - by Kaushik Gopal
    Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

    Read the article

  • VMware NAS/iSCSI recommendations - smallish organization

    - by Bubnoff
    I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

    Read the article

  • Copying symbolic links and filenames with special characters to NAS

    - by Mr E
    I have a new Western Digital My Book Live NAS. I am trying to copy files from an old drive to the NAS. I'm using Ubuntu 12.04 and I've mounted the drive by browsing the network in Nautilus and choosing a shared folder configured on the NAS. The shared folder is then automatically mounted at .gvfs/files on mybooklive. There are two problems so far: File names and directory names containing certain characters (e.g. : or |). Attempting to copy these results in the error message: cp: cannot stat `/path/to/destination.filename': Invalid argument Symbolic links. In Nautilus I get the error message: Symlinks not supported by backend My questions are: Can I connect to the NAS or configure the NAS so that I can copy my files without this problem? (In case it matters, I don't need Windows compatibility.) If not, what can I do to identify all the problem files? Can I do anything to automatically fix my filenames Please let me know if any of this needs clarification. I'm not too familiar with all of this so I may have left out some useful information.

    Read the article

  • Encryption setup for Linux NAS?

    - by Daniel
    There's a bazillion hard disk encryption HOWTOs, but somehow I can't find one that actually does what I want. Which is: I have a home NAS running Ubuntu, which is being accessed by a Linux and a Win XP client. (Hopefully MacOS X soon...) I want to setup encryption for home dirs on the NAS so that: It does not interfere with the boot process (since the NAS it tucked away in a cupboard), the home dirs should be accessible as a regular file system on the client(s) (e.g. via SMB), it is easy to use by 'normal' people, (so it does not require SSH-ing to the NAS, mount the encrypted partition on command line, then connecting via SMB, and finally umount the partition after being done. I can't explain that to my mom, or in fact to anyone.) does not store the encryption key the NAS itself, encrypts file meta-data and content (i.e. safe against the 'RIAA' attack, where an intruder should not be able to identify which songs are in your MP3 collection). What I hoped to do was use Samba + PAM. The idea was that on connecting to the SMB server, I'd have to enter the password on the client, which sends it to the server for authentication, which would use the password to mount the encrpytion partition, and would unmount it again when the session was closed. Turns out that doesn't really work, because SMB does not transmit the password in the plain and hence I can't configure PAM to use the incoming password to mount the encrypted patition. So... anything I'm overlooking? Is there any way in which I can use the password entered on the client (e.g. on SMB connect) to initiate mounting the encrypted dir on the server?

    Read the article

  • Snow Leopard and NAS share

    - by Andreas
    Hi, I bought a BlackArmor 220 from Seagate. When I start Snow Leopard the NAS shows up with its full name under shares. The problem is that when I click the NAS only a folder BA_Backup shows up, all the other folders, I created, don't. When I click the NAS, it says I'm connected as "guest". I mean I can connect by "Go to server" and additionally add the folders to the user startup objects, so they show up when I start my Mac, but when the NAS already shows up, why can't I configure it? Where can I change this? Thanks! Cheers, Andi

    Read the article

  • can't backup to a NAS drive as offline schedule task

    - by imageng
    I have seen this problem issue discussed in several forums including this one, but could not find a solution. On MS server 2003 I configured a Backup task, the target backup is on a NAS disc (Seagate BlackArmor NAS 110). The backup task is working well as a scheduled task or by a direct command, when I am logged on. It is not working when the user is offline (in this case - Administrator). I already tried the following actions: 1) addressing to the target as network drive (Y:location..), 2)Using UNC instead, 3) making the drive a domain member (the NAS admin S/W allows to define itself as a domain member) The result log message for 1 and 2 is: "The operation was not performed because the specified media cannot be found." The result log message for 3 is empty file. The schedule task "RUN" command is: C:\WINDOWS\system32\ntbackup.exe backup "@C:\Documents and Settings\Administrator\Local Settings\Application Data\Microsoft\Windows NT\NTBackup\data\de-board.bks" /a /d "Set created 2/14/2010 at 5:10 PM" /v:yes /r:no /rs:no /hc:off /m incremental /j "de-board" /l:s /f "\10.0.0.8\public\Backups\IBMServer\de-board.bkf" 10.0.0.8 is the static IP of the NAS. "Run only if logged on" is NOT marked. Password of the administrator user is set. It is obvious that there is no access to the NAS when the user is logged-out. Do you have any idea how can I solve it? Thanks

    Read the article

  • Windows server 2008 R2 nas connection

    - by Msmit1993
    I am a student and i'm experimenting with my own home server running windows server 2008 R2. Now i have a NAS in my network an i can connect with it trough my server but only if i am on the administrator account. My own account is in the administrators group but can't establish a connection with the NAS unless the administrator account has already connected. How do i make my own account connect with the NAS without first connecting with the admin account. The error message on my account: An error occurred while reconnecting Y: to \NAS\Download Microsoft Windows Network: The user name could not be found. This connection has not been restored.

    Read the article

  • Wireless NAS - options?

    - by Jinx999
    I want to put a NAS drive in an upstairs room (out of the way) but I believe most NAS drives need to be connected to the router. My router is hooked up close to the phone socket downstairs in a spot where we would rather just have the phone. Is there anyway to set-up a NAS drive without hooking it up directly to the router (e.g. wireless) or, better still, is there a way to move the router upstairs as well without significant recabling?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >