Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 1/318 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Hardware compatibility on H97 chipset/hardware support

    - by user3238850
    I am aware that there is documentation about compatibility but it is way out dated. I am also aware that there is a hardware compatibility page on Ubuntu website, but that one is focused on the whole box rather than a single piece of hardware. I have some experience with Linux OS, and some experience playing Ubuntu Server in a virtual machine, but never worked on a machine that lives in the real internet. I am building a home server with an Intel H97 chipset motherboard. I have looked at several models and none of them has Linux in the supported OS category. I have the experience of installing Ubuntu Desktop 14.04 on my 4-years-old lap top, and except for some system errors on start up, there is not too much I can complain about, so I guess I should be fine. However, this time I am going to install Ubuntu Server 14.04 on a relatively new piece of hardware(I went to http://linux-drivers.org/ but found nothing really helpful). For example the ASUS motherboard has M.2 socket and Intel LAN I218V chip, the Gigabyte motherboard has two LAN chips(Intel LAN WGI217V and ATHEROS AR8161-BL3A-R). So I really want to make sure everything will work. Usually I would just trust Ubuntu and buy all hardware I need, but basing on my past experience with the Ubuntu Desktop version on my lap top, I am not so convinced. There is an easily noticeable difference: when the system is idle, the fan runs much more frequently and longer under Ubuntu. This leads to my suspicion that generally hardware will have worse support for Ubuntu, which is no surprising at all but enough for me to put this post here. And as far as I know, some Intel CPU features come with software that usually will not run under Linux. Any help, idea or thoughts would be greatly appreciated!

    Read the article

  • Installing a new hardware enablement (HWE) stack in 64 bit Ubuntu

    - by Alexey
    I'd like to install 13.10 (Saucy) hardware enablement (HWE) stack to my Ubuntu 12.04 (64-bit) because I need a newer Linux kernel. This wiki page explains what "hardware enablement stacks" are. Among other things it says: Only the -generic x86 kernel flavor ... will be supported... Also, this answer says: ...This is only recommended for x86 hardware installations... Is x86 here synonymous to 32-bit/i386 architecture (but not 64-bit/AMD64), or is it i386/AMD64 (but not ARM)? Can I install this "hardware enablement stack" in a 64-bit/AMD64 Ubuntu? Will it be supported with future updates?

    Read the article

  • ASP.NET Web Server Hardware Configuration

    - by Santa Te Banta
    I'm planning on deploying my ASP.NET Web app in the production environment using a Windows Server 2003 machine. But I know nothing about the CPU brand names and what's best. I know 4 GB RAM, with anything over 3 GHz clock speed will be a good bet and will serve a large number of users. But tell me what's the latest and greatest processor brand-names for running a Windows Server 2003 OS today? And what edition of the Windows 2003 Server do I need out of the following, if I have to run a website to support about 100,000 (a hundred thousand) users, 60% of who are expected to be online at all times? Web Edition Standard Enterprise Datacenter source: http://en.wikipedia.org/wiki/Windows_Server_2003 The article says that the Web edition can only support up to 2 GB of RAM. Will that be sufficient for the above user population?

    Read the article

  • WebGL and Hardware acceleration problems [duplicate]

    - by Harry
    This question already has an answer here: How To Enable WebGL In Chrome On Ubuntu? 1 answer I am currently running Ubuntu 12.04 and in Windows 7 on my ATI Mobility Radeon 4300 series graphics card WebGL and hardware acceleration worked perfectly fine. Now on Ubuntu 12.04 I have tried both the open-source drivers and the FGLRX drivers and it no longer works. Could somebody please help? I use Google Chrome 18

    Read the article

  • Best hardware for a Ubuntu Computer?

    - by Dante Ashton
    Hey all. I'll be needing a new PC soon, but I've decided to build my own, so my question is...what's the best hardware for Ubuntu? Specifically, in terms of graphics cards; I'm looking for something that will run smoothly (for Compiz's effects and Unity) but will be quite modern (IE: have a HDMI output) The machine itself is just a generic computer, nothing special; I just want to future-proof it. I'm looking at quad-core chips and 3-4 gig of RAM. I want something that will play nice with Ubuntu; now, and in the future... I used to build machines years ago, but I've fallen behind (that was in the Windows 98 era...so yeah, quite a while ago!) My main problem is the graphics card; I'd prefer to stick with NVIDIA, but only a tiny amount of computers I've seen play nice with Nouveau.

    Read the article

  • Building small Ubuntu server - What hardware is recommended?

    - by 10robinho
    There are many of us who need to build small Ubuntu server. Problem is that in some countries it is hard to find and quite expensive to buy server motherboards and processors. And when one is building small server with limited budget, buying some Xenons is not really an option. So, are there any general recommendations for hardware (I think that motherboards are the main issue) that is stable and fast under Linux? I read that Intel should be the best choice for cpu + mbo combo. So, I was looking around for some Intel motherboards + i7 Ivy Bridge (like Intel DZ77BH-55K with Z77 chipset and Intel i7 3770K) but I've read that they have some issues with kernel, booting and USB ports. That is why I ask community if you have any experience with this. Maybe Intel is not the best choice here? Maybe ASUS or Gigabyte or _other company_ are more stable with Linux? I hope that this Q&As can help people in building stable Ubuntu server.

    Read the article

  • How to Tell a Hardware Problem From a Software Problem

    - by Chris Hoffman
    Your computer seems to be malfunctioning — it’s slow, programs are crashing or Windows may be blue-screening. Is your computer’s hardware failing, or does it have a software problem that you can fix on your own? This can actually be a bit tricky to figure out. Hardware problems and software problems can lead to the same symptoms — for example, frequent blue screens of death may be caused by either software or hardware problems. Computer is Slow We’ve all heard the stories — someone’s computer slows down over time because they install too much software that runs at startup or it becomes infected with malware. The person concludes that their computer is slowing down because it’s old, so they replace it. But they’re wrong. If a computer is slowing down, it has a software problem that can be fixed. Hardware problems shouldn’t cause your computer to slow down. There are some rare exceptions to this — perhaps your CPU is overheating and it’s downclocking itself, running slower to stay cooler — but most slowness is caused by software issues. Blue Screens Modern versions of Windows are much more stable than older versions of Windows. When used with reliable hardware with well-programmed drivers, a typical Windows computer shouldn’t blue-screen at all. If you are encountering frequent blue screens of death, there’s a good chance your computer’s hardware is failing. Blue screens could also be caused by badly programmed hardware drivers, however. If you just installed or upgraded hardware drivers and blue screens start, try uninstalling the drivers or using system restore — there may be something wrong with the drivers. If you haven’t done anything with your drivers recently and blue screens start, there’s a very good chance you have a hardware problem. Computer Won’t Boot If your computer won’t boot, you could have either a software problem or a hardware problem. Is Windows attempting to boot and failing part-way through the boot process, or does the computer no longer recognize its hard drive or not power on at all? Consult our guide to troubleshooting boot problems for more information. When Hardware Starts to Fail… Here are some common components that can fail and the problems their failures may cause: Hard Drive: If your hard drive starts failing, files on your hard drive may become corrupted. You may see long delays when you attempt to access files or save to the hard drive. Windows may stop booting entirely. CPU: A failing CPU may result in your computer not booting at all. If the CPU is overheating, your computer may blue-screen when it’s under load — for example, when you’re playing a demanding game or encoding video. RAM: Applications write data to your RAM and use it for short-term storage. If your RAM starts failing, an application may write data to part of the RAM, then later read it back and get an incorrect value. This can result in application crashes, blue screens, and file corruption. Graphics Card: Graphics card problems may result in graphical errors while rendering 3D content or even just while displaying your desktop. If the graphics card is overheating, it may crash your graphics driver or cause your computer to freeze while under load — for example, when playing demanding 3D games. Fans: If any of the fans fail in your computer, components may overheat and you may see the above CPU or graphics card problems. Your computer may also shut itself down abruptly so it doesn’t overheat any further and damage itself. Motherboard: Motherboard problems can be extremely tough to diagnose. You may see occasional blue screens or similar problems. Power Supply: A malfunctioning power supply is also tough to diagnose — it may deliver too much power to a component, damaging it and causing it to malfunction. If the power supply dies completely, your computer won’t power on and nothing will happen when you press the power button. Other common problems — for example, a computer slowing down — are likely to be software problems. It’s also possible that software problems can cause many of the above symptoms — malware that hooks deep into the Windows kernel can cause your computer to blue-screen, for example. The Only Way to Know For Sure We’ve tried to give you some idea of the difference between common software problems and hardware problems with the above examples. But it’s often tough to know for sure, and troubleshooting is usually a trial-and-error process. This is especially true if you have an intermittent problem, such as your computer blue-screening a few times a week. You can try scanning your computer for malware and running System Restore to restore your computer’s system software back to its previous working state, but these aren’t  guaranteed ways to fix software problems. The best way to determine whether the problem you have is a software or hardware one is to bite the bullet and restore your computer’s software back to its default state. That means reinstalling Windows or using the Refresh or reset feature on Windows 8. See whether the problem still persists after you restore its operating system to its default state. If you still see the same problem – for example, if your computer is blue-screening and continues to blue-screen after reinstalling Windows — you know you have a hardware problem and need to have your computer fixed or replaced. If the computer crashes or freezes while reinstalling Windows, you definitely have a hardware problem. Even this isn’t a completely perfect method — for example, you may reinstall Windows and install the same hardware drivers afterwards. If the hardware drivers are badly programmed, the blue-screens may continue. Blue screens of death aren’t as common on Windows these days — if you’re encountering them frequently, you likely have a hardware problem. Most blue screens you encounter will likely be caused by hardware issues. On the other hand, other common complaints like “my computer has slowed down” are easily fixable software problems. When in doubt, back up your files and reinstall Windows. Image Credit: Anders Sandberg on Flickr, comedy_nose on Flickr     

    Read the article

  • ??Database Replay Capture????

    - by Liu Maclean(???)
    Database Replay?11g??????,??workload capture??????????????,???????? ??Workload Capture???????: ???????????????,???????2????,??????,???????????OLTP???????capture 10????1G???? ?????: ????????????????????? ??startup restrict????,?????????? ??capture???restrict?? ????????????? ???????????????: ??scn???????? ???????? ???????? Capture???????????workload????? ???????SYSDBA?SYSOPER????OS?? ????: ?TPCC???capture??????4.5% ????session????64KB??? ???Workload Capture?????????? ????????2?, ??RAC????workload capture  file??????????????,??start_capture????? ????session????64KB???,??????????????workload  capture file????Server Process??????,?????????parse???execution????,Server Process??LOGON?LOGOFF?SQL??????????PGA?,???WCR Capture PG?WCR Capture PGA?,?PGA?????????????????,Server Process???????????WCR???,?????WCR???Server Process??’WCR: capture file IO write’????? ?WCR?????????: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select name from v$event_name where name like '%WCR%'; NAME ---------------------------------------------------------------- WCR: replay client notify WCR: replay clock WCR: replay lock order WCR: replay paused WCR: RAC message context busy WCR: capture file IO write WCR: Sync context busy latch: WCR: sync latch: WCR: processes HT 11g????????WCR???LATCH 1* select name,gets from v$latch where name like '%WCR%' SQL> / NAME GETS ------------------------------ ---------- WCR: kecu cas mem 3 WCR: kecr File Count 37 WCR: MMON Create dir 1 WCR: ticker cache 0 WCR: sync 495 WCR: processes HT 0 WCR: MTS VC queue 0 7 rows selected. ????????????Database Replay Capture????? 1. ????capture dbms_workload_capture.start_capture CREATE OR REPLACE DIRECTORY dbcapture AS '/home/oracle/dbcapture'; execute dbms_workload_capture.start_capture('CAPTURE','DBCAPTURE',default_action=>'INCLUDE'); SQL> select id,name,status,start_time,end_time,connects,user_calls,dir_path from dba_workload_captures where id = (select max(id) from dba_workload_captures) ; ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 1 CAPTURE IN PROGRESS 08-DEC-12 11 ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 167 /home/oracle/dbcapture 2. ?? capture file?? [oracle@mlab2 dbcapture]$ ls -lR .: total 8 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 cap drwxr-xr-x 3 oracle oinstall 4096 Dec 8 07:24 capfiles -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:24 wcr_cap_00001.start ./cap: total 4 -rw-r--r-- 1 oracle oinstall 91 Dec 8 07:24 wcr_scapture.wmd ./capfiles: total 4 drwxr-xr-x 12 oracle oinstall 4096 Dec 8 07:24 inst1 ./capfiles/inst1: total 40 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 08:31 aa drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ab drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ac drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ad drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ae drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 af drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ag drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ah drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ai drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 aj ./capfiles/inst1/aa: total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec ./capfiles/inst1/ab: total 0 ./capfiles/inst1/ac: total 0 ./capfiles/inst1/ad: total 0 ./capfiles/inst1/ae: total 0 ./capfiles/inst1/af: total 0 ./capfiles/inst1/ag: total 0 ./capfiles/inst1/ah: total 0 ./capfiles/inst1/ai: total 0 ./capfiles/inst1/aj: total 0 [oracle@mlab2 dbcapture]$ cd ./capfiles/inst1/aa [oracle@mlab2 aa]$ ls -l total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec [oracle@mlab2 aa]$ ls -l |wc -l 14 ???????14??? 3. ??LOGON????Server Process [oracle@mlab2 ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Sat Dec 8 08:37:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ?????wcr?? [oracle@mlab2 aa]$ ls -ltr total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:37 wcr_c6hp4h0000018.rec ??????wcr_c6hp4h0000018.rec ??? SQL> select spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID ------------------------ 14293 ????????????????14293, ???????????????,??????wcr_c6hp4h0000018.rec [oracle@mlab2 ~]$ ls -l /proc/14293/fd total 0 lr-x------ 1 oracle oinstall 64 Dec 8 08:39 0 -> /dev/null l-wx------ 1 oracle oinstall 64 Dec 8 08:39 1 -> /dev/null lrwx------ 1 oracle oinstall 64 Dec 8 08:39 10 -> /u01/app/oracle/product/11201/db_1/rdbms/audit/CRMV_ora_14293_1.aud l-wx------ 1 oracle oinstall 64 Dec 8 08:39 11 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc l-wx------ 1 oracle oinstall 64 Dec 8 08:39 12 -> pipe:[34585895] l-wx------ 1 oracle oinstall 64 Dec 8 08:39 13 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trm l-wx------ 1 oracle oinstall 64 Dec 8 08:39 2 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 3 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 4 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 5 -> /u01/app/oracle/product/11201/db_1/rdbms/mesg/oraus.msb lr-x------ 1 oracle oinstall 64 Dec 8 08:39 6 -> /proc/14293/fd lr-x------ 1 oracle oinstall 64 Dec 8 08:39 7 -> /dev/zero lrwx------ 1 oracle oinstall 64 Dec 8 08:39 8 -> /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec lr-x------ 1 oracle oinstall 64 Dec 8 08:39 9 -> pipe:[34585894] ?????lsof?? [root@mlab2 ~]# lsof|grep wcr_c6hp4h0000018.rec oracle 14293 oracle 8u REG 8,1 0 17629644 /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec ????????,??Server Process????WCR REC??,?Server Process LOGON?????? 3.????SQL??: SQL> select 1 from dual; 1 ---------- 1 SQL> / 1 ---------- 1 [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec ==»????SQL????, ??????? ??????SQL???,???????????????WCR??????,LOGON???????????SQL????,????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 11.2.0.3.0 *File header info. (Shadow process='14293') D0576B5D710A34F4E043B201A8C0ECFE SYS; NLS_LANGUAGE? AMERICAN> NLS_TERRITORY? AMERICA> NLS_CURRENCY? NLS_ISO_CURRENCY? AMERICA> NLS_NUMERIC_CHARACTERS? NLS_CALENDAR? GREGORIAN> NLS_DATE_FORMAT? DD-MON-RR> NLS_DATE_LANGUAGE? AMERICAN> NLS_CHARACTERSET? AL32UTF8> NLS_SORT? BINARY> NLS_TIME_FORMAT? HH.MI.SSXFF AM> NLS_TIMESTAMP_FORMAT? DD-MON-RR HH.MI.SSXFF AM> NLS_TIME_TZ_FORMAT? HH.MI.SSXFF AM TZR> NLS_TIMESTAMP_TZ_FORMAT? DD-MON-RR HH.MI.SSXFF AM TZR> NLS_DUAL_CURRENCY? NLS_SPECIAL_CHARS? NLS_NCHAR_CHARACTERSET? UTF8> NLS_COMP? BINARY> NLS_LENGTH_SEMANTICS? BYTE> NLS_NCHAR_CONV_EXCP? FALSE (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/u01/app/oracle/product/11201/db_1/bin/oracle)(ARGV0=oracleCRMV)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=mlab2.oracle.com)(USER=oracle)))) ,[email protected] (TNS V1-V3)U tselect spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)) ` _ select 1 from dual select 1 from dual ??????????????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 9`9_^B create table vva(t1 int) `:_i :`:_iB `;_^ ;`;_^B create table vva(t1 int) `_i >`>_iB FusC `?_^ ?`?_^B FvWC _begin for i in 1..50000 loop execute immediate 'select 1 from dual where 2='||i; end loop; end; ?SERVER PROCESS LOGOFF ??????? C`E_ B k^2C ????Server Process????parse?execution???WCR??,??????????PGA?,????????????,????????,?????WCR???????????,???????? 4. ?????? SQL> oradebug setmypid Statement processed. SQL> oradebug dump processstate 10; Statement processed. SQL> oradebug tracefile_name /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc ?processstate ??????????????? WCR: capture file IO write,??Server process??WCR ?? 3: waited for 'SQL*Net message to client' driver id=0x62657100, #bytes=0x1, =0x0 wait_id=139 seq_num=140 snap_id=1 wait times: snap=0.000007 sec, exc=0.000007 sec, total=0.000007 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 0.934091 sec of elapsed time 4: waited for 'latch: shared pool' address=0x60106b20, number=0x133, tries=0x0 wait_id=138 seq_num=139 snap_id=1 wait times: snap=0.000066 sec, exc=0.000066 sec, total=0.000066 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 1.180690 sec of elapsed time 5: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=137 seq_num=138 snap_id=1 wait times: snap=0.000189 sec, exc=0.000189 sec, total=0.000189 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.122783 sec of elapsed time 6: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=136 seq_num=137 snap_id=1 wait times: snap=0.000191 sec, exc=0.000191 sec, total=0.000191 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.053132 sec of elapsed time 7: waited for 'WCR: capture file IO write' 5.??PGA???? SQL> oradebug dump heapdump 536870917; Statement processed. grep WCR /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6111e18 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6112e98 sz= 4184 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6113ef0 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6114f70 sz= 4104 recreate "WCR Capture PG " latch=(nil) Chunk 7fb1b6115f78 sz= 160 freeable "WCR Capture PGA" Chunk 7fb1b6116018 sz= 3248 freeable "WCR Capture PGA" Subheap ds=0x7fb1b6115f90 heap name= WCR Capture PG size= 82336 HEAP DUMP heap name="WCR Capture PG" desc=0x7fb1b6115f90 FIVE LARGEST SUB HEAPS for heap name="WCR Capture PG" desc=0x7fb1b6115f9 PGA???WCR Capture PG ?WCR Capture PGA?freeable or recreate??chunk,???????Server Process???OS Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 sz= 65600=» 64k ??????????64k??,???????????????64k WCR????????????:)! 6.???? ??WCR CAPTURE????????2? SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm in ('_capture_buffer_size','_wcr_control'); NAME VALUE DESCRIB -------------------- -------------------- ------------------------------------------------------------ _wcr_control 0 Oracle internal test WCR parameter used ONLY for testing! _capture_buffer_size 65536 To set the size of the PGA I/O recording buffers ??_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k _wcr_control ??WCR?????,?????? ????,??????: 1. ???WCR WORKLOAD CAPTURE???????????,??Server Process????(????)2. ???server process????WCR??3. Server Proess???LOGON?LOGOFF?SQL?????????WCR???4. Server Process????????Immediate mode,????????PGA?(WCR Capture) subheap?,??????????????(timeout?????)5. ????, Server Process????????Immediate mode,?capture????parse??execution??(?????capture???parse?????????????,parse????capture???),?????LOGON?SQL??(???????)??PGA?WCR Capture?????,???????,????????,??tpcc??????4.5%6. ????_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k7. WCR Capture?????binrary 2????,?????,????????????????WCR capture file8. WCR: capture file IO write?????Server Process??WCR??

    Read the article

  • Constructs for wrapping a hardware state machine

    - by Henry Gomersall
    I am using a piece of hardware with a well defined C API. The hardware is stateful, with the relevant API calls needing to be in the correct order for the hardware to work properly. The API calls themselves will always return, passing back a flag that advises whether the call was successful, or if not, why not. The hardware will not be left in some ill defined state. In effect, the API calls advise indirectly of the current state of the hardware if the state is not correct to perform a given operation. It seems to be a pretty common hardware API style. My question is this: Is there a well established design pattern for wrapping such a hardware state machine in a high level language, such that consistency is maintained? My development is in Python. I ideally wish the hardware state machine to be abstracted to a much simpler state machine and wrapped in an object that represents the hardware. I'm not sure what should happen if an attempt is made to create multiple objects representing the same piece of hardware. I apologies for the slight vagueness, I'm not very knowledgeable in this area and so am fishing for assistance of the description as well!

    Read the article

  • Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

    - by Newb
    I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

    Read the article

  • Older SAS1 hardware Vs. newer SAS2 hardware

    - by user12620172
    I got a question today from someone asking about the older SAS1 hardware from over a year ago that we had on the older 7x10 series. They didn't leave an email so I couldn't respond directly, but I said this blog would be blunt, frank, and open so I have no problem addressing it publicly. A quick history lesson here: When Sun first put out the 7x10 family hardware, the 7410 and 7310 used a SAS1 backend connection to a JBOD that had SATA drives in it. This JBOD was not manufactured by Sun nor did Sun own the IP for it. Now, when Oracle took over, they had a problem with that, and I really can’t blame them. The decision was made to cut off that JBOD and it’s manufacturer completely and use our own where Oracle controlled both the IP and the manufacturing. So in the summer of 2010, the cut was made, and the 7410 and 7310 had a hardware refresh and now had a SAS2 backend going to a SAS2 JBOD with SAS2 drives instead of SATA. This new hardware had two big advantages. First, there was a nice performance increase, mostly due to the faster backend. Even better, the SAS2 interface on the drives allowed for a MUCH faster failover between cluster heads, as the SATA drives were the bottleneck on the older hardware. In September of 2010 there was a major refresh of the rest of the 7000 hardware, the controllers and the other family members, and that’s where we got today’s current line-up of the 7x20 series. So the 7x20 has always used the new trays, and the 7410 and 7310 have used the new SAS2 trays since last July of 2010. Now for the bad news. People who have the 7410 and 7310 from BEFORE the July 2010 cutoff have the models with SAS1 HBAs in them to connect to the older SAS1 trays. Remember, that manufacturer cut all ties with us and stopped making the JBOD, so there’s just no way to get more of them, as they don’t exist. There are some options, however. Oracle support does support taking out the SAS1 HBAs in the old 7410 and 7310 and put in newer SAS2 HBAs which can talk to the new trays. Hey, I didn’t say it was a great option, I just said it’s an option. I fully realize that you would then have a SAS1 JBOD full of SATA drives that you could no longer connect. I do know a client that did this, and took the SAS1 JBOD and connected it to another server and formatted the drives and is using it as a plain, non-7000 JBOD. This is not supported by Oracle support. The other option is to just keep it as-is, as it works just fine, but you just can’t expand it. Then you can get a newer 7x20 series, and use the built-in ZFSSA replication feature to move the data over. Now you can use the newer one for your production data and use the older one for DR, snaps and clones.

    Read the article

  • Small web server hardware advice

    - by Dmitri
    We need to build a new web server for our organization. We have around 100 hundred small traffic web sites, so our hardware requirements are not too tough. We run CentOS 6, Varnish+Apache, PHP, MySQL, Typo3 CMS for most of websites. Here's a hardware we want to buy: SuperMicro X9SCA-F-O (we need to have a remote management capability) (or better X9SCM-F?) Intel Xeon E3-1220 v2 2*4Gb DDR-III 1600MHz Kingston ECC (KVR16E11/4) (currently we have 4gb, and it feels like enough, so no reason for 16gb yet). Procase EB140-B-0 (1 unit) PSU 350W Procase MG1350, Active PFC We already have: Intel 335 120GB SSD (for OS, databases and important websites). 2*2tb WD Green RAID1 (for other data and backups). Does it look like a reasonable choice for our needs? Any issues with hardware compatibility? Any other notes?

    Read the article

  • Hardware selection for Linux machine

    - by bguiz
    Hi, I am building a new box, and planning to install Ubuntu 9-04 or Ubuntu 9-10 on it. I am wary of the hardware selection because in the past I struggled with lack of drivers or driver incompatibility with the network card and video card, etc. The last time I built a Linux box was 2007, and I have not kept up to date with the changes since. One notable difference is that I can no longer find motherboards with nVidia chip sets. See what I mean (links to my local shop's website): Intel motherboards: http://www.centrecom.com.au/catalog/default.php?page=1&cPath=36_62 AMD motherboards: http://www.centrecom.com.au/catalog/default.php?page=1&cPath=36_63 I have already checked the Ubuntu forums, but their motherboards section is rather outdated, and I did not look further. I would like to know your suggestions for what Linux compatible hardware that you have got. Thank you!

    Read the article

  • Looking for QNX compatible server hardware

    - by Sergey Sobolev
    Can you help me to find compatible modern server for QNX, please? This is quite rare OS, so most of the hardware vendors do not have compatibility information. It would be very helpful to me if you can do the following: Download iso http://www.qnx.com/download/download/19602/qnxsdp-6.4.1-x86-200905201802-nto.iso burn to cd Start from cd press F2 - try from CD start Utilities/Terminal run sloginfo /tmp/sloginfo.log; get_hw_info; pci -vvv /tmp/pci-vvv.log send logs from /tmp/ to [email protected] with system model/build I will summarize results afterwards and post them here. I'm especially interested in Fujitsu RX100 S5 as it looks like one of the most compatible servers with frontally accessible HDDs.

    Read the article

  • Looking for Hardware that will easily interface with my .NET code.

    - by SkippyFire
    I'm a .NET C# developer looking to do some hardware interfacing/programming. I just want something super simple to mess around with. I have done one of those basic stamp projects, but I want something with less electrical work. A self-contained piece of hardware would be fine. I'm not really looking to do embedded programming... but that would actually be pretty cool if something was capable of running .net code. I'm looking for something that would be easy to connect, hopefully via USB. Serial ports seems to be more hit or miss nowadays with laptops and netbooks. Something I can easily send data to, like a mini LCD, or series of LED's. Better yet would be something that provides feedback, like a temperature sensor. The best would be something more featured that I could talk to. I would be able to send data to it, and it would send back responses. Maybe something like a servo that could report it's position? Or maybe something that I could set parameters on? Any ideas? Thanks in advance!

    Read the article

  • Installer Reboots at "Detecting hardware" (disks and other hardware) on all recent Server Installs

    - by Ryan Rosario
    I have a very frustrating problem with my PC. I cannot install any recent version of Ubuntu Server (or even Desktop) since 9.04 even using the text-based installer. I boot from a USB stick created by Unetbootin (I also tried other methods such as startup disk creator with no difference). On the Server installer, it gets to "Detecting Hardware" (the second one about disks and all other hardware, not network hardware) and then either hangs at 0% (waited 24 hours), or reboots after a minute or two. My system (late 2007): ASUS P5NSLI motherboard Intel Core 2 Duo E6600 2.4Ghz 2 x 1GB Corsair 667MHz RAM nVidia GeForce 6600 I have unplugged everything (including the only hard disk, CD-ROMs and floppy). I have only one stick of RAM (tried each one to no avail) and am booting the installer from a USB stick (booting from CD-ROM yields the same problem). I also tried several of the boot options (nomodeset, nousb, acpi=off, noapic, i915.modeset=1/0, xforcevesa) in all combinations) to no avail. The only active parts of my system are the video card, mouse, keyboard and USB stick. I have also updated the BIOS to the most recent version. (FWIW, on the Desktop installer, I get a black screen after hitting the Install option.) Even after removing "quiet" I am unable to see what kernel panic is occurring (or not occurring) to cause the install to crash. I am only able to save the debug logs via a simple webserver in the installer. After the last line (I repeatedly refreshed), the server stops responding and the installer hangs or reboots: Jan 2 01:04:03 main-menu[302]: INFO: Menu item 'disk-detect' selected Jan 2 01:04:04 kernel: [ 309.154372] sata_nv 0000:00:0e.0: version 3.5 Jan 2 01:04:04 kernel: [ 309.154409] sata_nv 0000:00:0e.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.154531] sata_nv 0000:00:0e.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.164442] scsi0 : sata_nv Jan 2 01:04:04 kernel: [ 309.167610] scsi1 : sata_nv Jan 2 01:04:04 kernel: [ 309.167762] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 10 Jan 2 01:04:04 kernel: [ 309.167774] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 10 Jan 2 01:04:04 kernel: [ 309.167948] sata_nv 0000:00:0f.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.168071] sata_nv 0000:00:0f.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.171931] scsi2 : sata_nv Jan 2 01:04:04 kernel: [ 309.173793] scsi3 : sata_nv Jan 2 01:04:04 kernel: [ 309.173943] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 11 Jan 2 01:04:04 kernel: [ 309.173954] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 11 Jan 2 01:04:04 kernel: [ 309.174061] pata_amd 0000:00:0d.0: version 0.4.1 Jan 2 01:04:04 kernel: [ 309.174160] pata_amd 0000:00:0d.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.177045] scsi4 : pata_amd Jan 2 01:04:04 kernel: [ 309.178628] scsi5 : pata_amd Jan 2 01:04:04 kernel: [ 309.178801] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Jan 2 01:04:04 kernel: [ 309.178811] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface lo Jan 2 01:04:04 kernel: [ 309.485062] ata3: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:04 kernel: [ 309.633094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jan 2 01:04:04 kernel: [ 309.641647] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 Jan 2 01:04:04 kernel: [ 309.641658] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) Jan 2 01:04:04 kernel: [ 309.657614] ata1.00: configured for UDMA/133 Jan 2 01:04:04 kernel: [ 309.657969] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 Jan 2 01:04:04 kernel: [ 309.658482] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 2 01:04:04 kernel: [ 309.658588] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 2 01:04:04 kernel: [ 309.658812] sd 0:0:0:0: [sda] Write Protect is off Jan 2 01:04:04 kernel: [ 309.658823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 2 01:04:04 kernel: [ 309.658918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 2 01:04:04 kernel: [ 309.675630] sda: sda1 sda2 Jan 2 01:04:04 kernel: [ 309.676440] sd 0:0:0:0: [sda] Attached SCSI disk Jan 2 01:04:05 kernel: [ 309.969102] ata2: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:05 kernel: [ 310.281137] ata4: SATA link down (SStatus 0 SControl 300) Anybody have any additional ideas I could try? I am getting ready to just toss the motherboard.

    Read the article

  • Hardware Compatibility

    - by thebradnet
    I am looking into buying a LENOVO RD330 SERVER with a ThinkServer RAID 500 Adapter II RAID controller. I am having problems finding out if all of the hardware that I am wanting will be compatible with Ubuntu. I have check the "Certified Hardware" list but the list is very limited. Both the computer and the RAID controller say they support RedHat and Suse but obviously Ubuntu isn't mentioned. I have talked with my vendor and they also not certain if this hardware will work. I have also Google around and the RAID controller appears to be an LSI chipset. But again I haven't been able to find any definitive information saying that this will work. Any suggestions on how I can find out if the hardware will work?

    Read the article

  • Oracle Standard Installation (OSI) Services – Service für Hardware-Upgrades

    - by swalker
    In diesem Update erfahren Sie alles über die Services der Oracle Standard Installation (OSI) von Oracle Advanced Customer Support (ACS). Oracle imformiert Sie außerdem über die Einführung weiterer OSI-Teile für die Bestellung von Komplettservices zur Installation von Upgrades bei bereits installierten Systemen. Darunter fallen auch zusätzliche Upgrades für Serverprozessoren (CPUs), Arbeitsspeicher, Netzwerkkarten, Speicher-Appliances und Bandbibliotheken. Die OSI Installationsservices für Hardware-Upgrades können wie folgt bestellt werden: beim Hardware Point of Sale (POS) – über den Offline-Prozess für Hardware im Oracle PartnerNetwork (OPN) unabhängige Bestellungen „After Point of Sale (APOS)“ – über den Offline-OSI-Prozess des ACS Services Order Desk. Diese Prozesse sowie die aktualisierten Dateien für die OSI-Teilezuordnung finden Sie auf der Website des Oracle Partner Stores (OPS). Die OSI-Teile für Hardware-Upgrades können im OPS ab Ende 2011 bestellt werden. Wenn Sie Fragen zu diesem Update haben, wenden Sie sich an das Global Partner Support Team unter [email protected].

    Read the article

  • Difference between "machine hardware" and "hardware platform"

    - by Adil
    My Linux machine reports "uname -a" outputs as below:- [root@tom i386]# uname -a Linux tom 2.6.9-89.ELsmp #1 SMP Mon Apr 20 10:34:33 EDT 2009 i686 i686 i386 GNU/Linux [root@tom i386]# As per man page of uname, the entries "i686 i686 i386" denotes:- machine hardware name (i686) processor type (i686) hardware platform (i386) Additional info: [root@tom i386]# cat /proc/cpuinfo <snip> vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5148 @ 2.33GHz stepping : 6 cpu MHz : 2328.038 cache size : 4096 KB </snip>

    Read the article

  • Installation problem Ubuntu 12.04 Crashing hardware error

    - by user93640
    I am running on Ubuntu 8.04 for quite some time without many problems. About almost a year ago or so I have been trying to upgrade to 10.04 LTS, but without any success. Each time when trying to upgrade or even newly install the installation process crashed after about an hour or so (I forgot exactly how long). Now I wanted to try Ubuntu 12.04 (not even installing, but I only selected "Try Ubuntu without installing") and I got similar errors. I did not try to install it, because of earlier experience with 10.04 when after I also lost 8.04 and had to install from scratch again (after which it worked). I get the following screen (as I am not allowed to upload photos here the text): 26.767262] [Hardware Error]: CPU 0: Machine Check Exception: 0 Bank 5: b200001804000e0f 26.767279] [Hardware Error]: TSC 0 26.767287] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 0 microcode 44 26.767297] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767307] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 1: b200000000000175 26.767316] [Hardware Error]: TSC 0 26.767323] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767331] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767339] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 5: b200003000000e0f 26.767348] [Hardware Error]: TSC 0 26.767354] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767363] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767371] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 1: b200000000000175 26.767379] [Hardware Error]: TSC 1bf231e65f 26.767386] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767395] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767403] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 5: b200003008000e0f 26.767413] [Hardware Error]: TSC 1bf231e65f 26.767421] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767429] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767437] [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 5: b200001806000e0f 26.767447] [Hardware Error]: RIP |INEXACT| 60:<00000000c1018b5c> {mwait_idle+0x7c/0x1d0} 26.767464] [Hardware Error]: TSC 1bf231e674 26.767471] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 0 microcode 44 26.767480] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767487] [Hardware Error]: Machine check: Processor context corrupt 26.767495] Kernel panic - not syncing: Fatal Machine check 26.767505] Pid: 579, comm: debconf-communi Tainted: G M 3.2.0.29-generic-pae #46-Ubuntu 26.767515] Call Trace: 26.767525] [<c158f812>] ? printk+0x2d/0x2f 26.767534] [<c158f6e0>] panic+0x5c/0x161 26.767542] [<c10247ef>] mce_panic.part.14+0x13f/0x170 26.767551] [<c1024872>] mce_panic+0x52/0x90 26.767558] [<c1024a18>] mce_reign+0x168/0x170 26.767565] [<c1024bb5>] mce_end+0x105/0x110 26.767572] [<c10252db>] do_machine_check+0x32b/0x4f0 26.767581] [<c1024fb0>] ? mce_log+0x120/0x120 26.767590] [<c15a5e47>] error_code+0x67/0x6c 26.767602] panic occurred, switching back to text console 26.768498] Rebooting in 30 seconds.. For information, I have also tried earlier Arch Linux. I can install it, but when I try to install a window manager (LXDE) again I got similar errors. Fedora also crashes when installing and also Mandriva did not work for me. Therefore I think something deep in the machine might be wrong. But as stated above I can (clean) install 8.04 and also 9.10 can be installed without problems. Also updates for 8.04 can be installed. My machine is dual boot with XP next to it on a different partition. My HW: Memory : 2.0 GiB; Processor 0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; Processor 1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; How can I install Ubuntu 12.04? Last option would be to completely format my machine and install everything from scratch, but even I am not sure if that would solve it in the end. Can anybody help me out?

    Read the article

  • Hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • Starting my own server - basic recommendations and questions [closed]

    - by Ilia Rostovtsev
    Possible Duplicate: Can you help me with my capacity planning? I'm planning to start my own high-performance server and then use collocation services for keeping it up and running. I'm planning to USE it for processing videos and keeping big video site up! (using FFMpeg, MENcoder and etc.) I just need recommendations on whether listed hardware is good enough and will work together well and fast enough. Do I need anything else (missed something). I remember about CPU coolers though! ;) I'm planning to use SSD drives so please tell me if it's going to work just as regular HDDs (but much faster)? Are they going to be used as RAID (is this possible for SSDs)? Here is what I would like to get: Intel ® Server System SR1600URHSR (Urbanna) or Intel® Server System SR1695WBAC 2 x Intel Xeon X5650 4 x 16Gb DDR-III 1333MHz Kingston ECC Reg (KVR13R9D4/16) 3 x (or maybe 4x) 480Gb SSD Intel 520 Series (SSDSC2CW480A3K5) Which server system would be better? Is listed hardware new/good enough and worth buying it at the moment? Should I probably take a look at something slightly more expensive but more up to date and powerful, may be? After all as software I would like to use CentOS 6 64 bit + WHM/CPanel? Any other suggestions on maybe cheaper and same/more powerful server management system but WHM? What most important points to keep in mind when starting/maintaining your own server?

    Read the article

  • C#/XNA get hardware mouse position

    - by Sunder
    I'm using C# and trying to get hardware mouse position. First thing I tryed was simple XNA functionality that is simple to use Vector2 position = new Vector2(Mouse.GetState().X, Mouse.GetState().Y); After that i do the drawing of mouse as well, and comparing to windows hardware mouse, this new mouse with xna provided coordinates is "slacking off". By that i mean, that it is behind by few frames. For example if game is runing at 600 fps, of curse it will be responsive, but at 60 fps software mouse delay is no longer acceptable. Therefore I tried using what I thought was a hardware mouse, [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool GetCursorPos(out POINT lpPoint); but the result was exactly the same. I also tried geting Windows form cursor, and that was a dead end as well - worked, but with the same delay. Messing around with xna functionality: GraphicsDeviceManager.SynchronizeWithVerticalRetrace = true/false Game.IsFixedTimeStep = true/fale did change the delay time for somewhat obvious reasons, but the bottom line is that regardless it still was behind default Windows mouse. I'v seen in some games, that they provide option for hardware acelerated mouse, and in others(I think) it is already by default. Can anyone give some lead on how to achieve that.

    Read the article

  • Register Now! Oracle Hardware Sales Training: Hardware and Software - Engineered to be Sold Together!

    - by swalker
    Dear partner, You can now register for Oracle’s EMEA Hardware Sales Training Roadshow: "Hardware and Software - Engineered to be Sold Together!" The objective of this one-day, face-to-face, free of charge training session is to share with you and your Oracle peers the latest information on Oracle’s products and solutions and to ensure that you are fully equipped to position and sell Oracle’s integrated stack. Please find agenda, schedule, details and registration information here. The EMEA Hardware Sales Training Roadshow is intended for Oracle Partners and Oracle Sales working together. Limited seats are available on a first-come-first-serve basis, so kindly register as early as possible to reserve your seat. We hope you will take maximum advantage of these great learning and networking opportunities and look forward to welcoming you to your nearest event! Best regards, Giuseppe Facchetti Partner Business Development Manager, Servers, Oracle EMEA Sasan Moaveni Storage Partner Sales Manager Oracle EMEA

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >