Search Results

Search found 4063 results on 163 pages for 'intel'.

Page 1/163 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Intel graphics driver installer, now the CPU fan is rarely quiet

  - by Space monkey

  I have an Optimus chipset: Intel HD 4000 (i7-3635QM CPU) Geforce 640m I don't care about the NVIDIA card, so I didn't try to install any proprietary drivers for it. So: I was having a choppy+high CPU experience with gnome-shell on Ubuntu 14.04. Only happened when I tried moving a window around quickly. I used the Intel graphics installer hoping that it will fix the problem. It did fix the problem, now there is no choppyness or high CPU when I move windows around. However, there is a new problem now: The fan is rarely quiet, doing barely anything at all will cause the fan to go into loud mode quickly. That happens despite the CPU usage being at just around 4%. This wasn't the case before installing Intel drivers. It would normally only do that if, for example, I'm installing packages or doing something that puts some stress on the CPU. I set all CPU cores to "powersave" using cpufreq-set, but nothing changed. Also on Windows, the fans are really quiet when I'm in powersave mode. I believe they completely shut off for most of the time. I remember the installer giving me a report at the end as to which packages it installed. Unfortunately, I didn't save the report and I don't know where it would have saved it if it did. Any ideas or similar experiences?

  Read the article

• Performance problem with an Intel Wireless 5100

  - by Piet

  I just installed 12.04 on a HP Elitebook 2530p. The performance with wireless connection to an Eminem 4551 is very bad. Wired connection just works great. If I connect to my router (Eminent 4551) wired I have a good performance accessing internet pages with Firefox. When I try to access the same internet pages wireless I get a real bad performance. piet@piet-HP-EliteBook-2530p:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 44:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 44:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) piet@piet-HP-EliteBook-2530p:~$

  Read the article

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• Nvidia 9 series or Intel HD 2000? [closed]

  - by EApubs

  I just tested an Nvidia 9300 GS card with a Intel Corei3 HD 2000 graphics system. Here is the windows experience index scores I got : Nvidia 9300 GS : Base Score 3.9 Processor : 7.1 Memory : 7.5 Graphics : 3.9 Gaming Graphics : 5.1 Hard Disk : 5.9 Intel HD 2000 : Base Score : 5.2 Processor : 7.1 Memory : 5.9 Graphics : 5.2 Gaming Graphics : 5.8 Hard Disk : 5.9 My questions are : When using Intel HD graphics, it reduces the score of my Ram! How is that possible? It checks the speed of the ram. Not the size (i think). Intel graphics take some of the ram space but how can that effect the speed? From both of them, what will be the good choice?

  Read the article

• latest intel graphics driver?

  - by Anwar Shah

  I have Intel Graphics Card, which have model number GM965. It is on a Notebook, (Lenovo 3000 Y410). My Ubuntu Installation worked good until I upgraded to 12.04. It was a fresh install. The Graphics performance is poor compared to Natty, Oneiric. In the details tab of System Settings, Graphics driver is shown as "Unknown". I have upgraded the xserver-xorg-video-intel package to version 2.19.. from 2.17. But still same. So, My question is How can I install latest Intel graphics driver for my Chipset? or Is there any other method to fix the problem with graphics.

  Read the article

• How to disable DisplayInfo for Intel i810 when there is no xorg.conf

  - by user86954

  I'm testing Ubuntu 12.04 on an office desktop. This machine has an integrated Intel i810. This very machine used to run Ubuntu (or kubuntu) quite well, until the natty narwhal release, when the xserver started freezing. This seems to be caused by an issue with a call to the video bios, which can be circumvented by disabling the option DisplayInfo. I tried creating an xorg.conf by using Xorg -configure, but it produced an error after trying to make a file. I did have a file, and I put it in /etc/X11 with DisplayInfo false (maybe it wants "disabled"?), but it wouldn't boot at all until I removed that xorg.conf. There is no 10-monitor.conf file either. All I want to do is set the appropriate option so that my intel display doesn't freeze. Is there any other way I can disable the DisplayInfo? Andrew

  Read the article

• wireless detected but Can't connect to network, Wifi card intel pro wireless N100 BGN

  - by Alexandre777

  Thanks in advance, I installed Linux Mint kernel 3.0.0-12 x64 ,wireless is detected and I configure it in network manager but can't coonect, there are the results of command line: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ sudo lshw -C network** *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:51:c9:d6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:d7400000-d7401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:5b:39:99:8f:16 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Thank you.

  Read the article

• Ubuntu 12.04, xbmc, opengl, intel motherboard

  - by Sean Hagen

  I've got an HTPC that I built myself, with a Asus P5G41T-M Motherboard. It's got an on-board HDMI port, and I've been using that with no problems. I started out with Mythbuntu ( an older version ), and recently updated to 12.04.1 LTS without any issues. I've been thinking about trying out XBMC for a while, and I decided to give it a go. Unfortunately, I seem to be running into quite a few issues. I got XBMC installed from the repos without any issues, but when I try to run it from a console, a box pops up with the following: XBMC needs hardware accelerated OpenGL rendering. Install an appropriate graphics driver. Please consule XBMC Wiki for supported hardware http://wiki.xbmc.org/?title=Supported_hardware In the console, it prints out the following: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 136 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 When I run vainfo, I get this: libva: VA-API version 0.32.0 libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva: va_openDriver() returns 0 vainfo: VA-API version: 0.32 (libva 1.0.15) vainfo: Driver version: Intel i965 driver - 1.0.15 vainfo: Supported profile and entrypoints VAProfileMPEG2Simple : VAEntrypointVLD VAProfileMPEG2Main : VAEntrypointVLD The file /usr/lib/x86_64-linux-gnu/dri/i964_drv_video.so exists: # ls -l /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so -rw-r--r-- 1 root root 628728 Mar 29 2012 /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so And in /var/log/Xorg.0.log the following error pops up: GLX error: Can not get required symbols. I'm not really sure where to go from here. I've tried searching all over for how to fix this problem. I've done "apt-get --reinstall xserver-xorg" ( as well as a few other video driver packages ) a few times, and no change. Any help in getting this issue sorted out would be awesome.

  Read the article

• Ubuntu 12.10 - Graphics driver shows Gallium 0.4 instead of intel HD

  - by nlooije

  I have a hybrid Intel/Nvidia system using bumblebee on Ubuntu 12.10 with specs: Clevo W150HR, SB i7-2720qm, 8GB RAM, 128GB Crucial M4 SSD + 500GB HDD It is reported to use software rendering (through Gallium driver) rather than accelerated through the intel HD driver. Reinstalling the intel driver has no effect: sudo apt-get install --reinstall xserver-xorg-video-intel The result is a rather sluggish desktop. Is there any way to blacklist the gallium driver? Or force the intel driver instead? Edit 1 - Ubuntu 12.04 shows the driver as Intel SandyBridge out of the box, but 12.10 does not even after running the above command. Edit 2 - Xorg.0.log shows: (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT1) (WW) intel(0): Disabling hardware acceleration on this pre-production hardware. Edit 3 - It turns out that SandyBridge rev.7 systems are known to be unstable per this link. Accordingly in the xserver-xorg-video-intel if it detects this rev. it disables it with the warning in above log.

  Read the article

• Intel Parallel XE : Intel publie un eBook gratuit pour découvrir son outil d'optimisation des développements parallèles

  Intel Parallel XE : Intel publie un eBook gratuit Pour découvrir son outil d'optimisation des développements parallèles Les solutions Intel Parallel développées, comme leur nm l'indique, par Intel sont un ensemble d'outils qui permettent une meilleure optimisation des développements parallèles pour tirer partie des architectures multi-coeurs. « La nouvelle gamme d'outils Intel Parallel XE permet aux équipes de développement de délivrer le code en temps et en heure avec le niveau de performance le plus élevé eet le minimum de défauts du cluster au desktop jusqu'au périphériques », explique Intel. Pour aider les développeurs dans la découverte et la prise en main d'Int...

  Read the article

• Video and LAN Cards are not recognized on Intel DG41RQ MB

  - by artyom

  Hello, My 32 bit Debian Etch with Etch-n-Half kernel 2.6.24 and Etch-n-half video driver xserver-xorg-video-intel 2.2.1-1~etchnhalf2 does not recognize my on-board LAN and Video. I can work only with VESA display. And additional PCI LAN card (that I wanted to use for Cross-X-Cabel). output of lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10 According to MB Spec: Video: Intel G41 Express Chipset Graphics and Memory Controller Hub Graphics (GMCH) LAN: Realtek 8111D Gigabit Ethernet Controller LAN Support When I run dpkg-reconfigure xserver-xorg is suggest i810 driver but X does not start, it does not start with intel driver as well; only vesa. LAN I even can't find in lspci... the last Realtek card is external one 100MB card. Where to start from?

  Read the article

• How do I get Intel 845g graphics working?

  - by Rayson Jimenez

  I need help enabling Intel 845g to run with intel drivers. I'v looked everywhere on the net with no joy. I can't seem to get intel video drivers to load the gui, only with vesa drivers. it drops me straight to the shell prompt. Xorg.0.log shows the following. Any help would be GREATLY appreciated. [ 244.843] (II) LoadModule: "intel" [ 244.843] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 244.844] (II) Module intel: vendor="X.Org Foundation" [ 244.844] compiled for 1.9.0, module version = 2.12.0 [ 244.844] Module class: X.Org Video Driver [ 244.844] ABI class: X.Org Video Driver, version 8.0 [ 244.844] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 244.844] (--) using VT number 8 [ 244.971] (EE) intel(0): No kernel modesetting driver detected. [ 244.971] (II) UnloadModule: "intel" [ 244.971] (EE) Screen(s) found, but none have a usable configuration. [ 244.971] Fatal server error: [ 244.971] no screens found [ 244.971] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 244.971] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 244.971] [ 245.213] ddxSigGiveUp: Closing log

  Read the article

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• Intel® Core™2 Duo Desktop Processor vs Intel® Core™ i3 Desktop Processor?

  - by metal gear solid

  Intel® Core™2 Duo Desktop Processor vs Intel® Core™ i3 Desktop Processor? Which CPU is better to buy ? Intel® Core™ i3-530 Processor (4M Cache, 2.93 GHz) (it supports DDR3 also) or Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) (it supports DDR2 only ) Although I do not play games on my PC but I need good performance in Adobe Photoshop, Watching Full HD Movies. I need good performance in Multitasking. Along with any of these CPU I would purchase 2 GB x 2 stick of RAM. and I will use Windows 7. and I will use Microsoft VPC images also with MS Virtual PC.

  Read the article

• Is the Core i5 Processor from Intel like the Celerons of yesteryear?

  - by Chris

  The title pretty much says it. I know that the Core i7's are Quad Core and Hyper-threaded (so 4 cores, and 8 logical), and the Core i5's are Quad Core as well but not Hyper-threaded, does this really make a difference? Or are the only people who are going to care are the ones who CPU intensive operations? I'm a developer, so I'm more concerned about hard drive speed most times than CPU speed. Any thoughts?

  Read the article

• Unity 3D Not working where as Unity 2D works fine [closed]

  - by Stephen Martin

  I updated from 11.10 to 12.04 using the distribution upgrade, after that I couldn't log into using the Unity 3D desktop after logging in I would either never get unity's launcher or I would get the launcher and once I tried to do anything the windows lost their decoration and nothing would respond. If I use Unity 2D it works fine and in fact I'm using it to type this. I managed to get some info out of dmesg that looks like it's the route of whats happening. dmesg: [ 109.160165] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 109.160180] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [ 109.167587] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 1226 at 1218, next 1227) [ 109.672273] [drm:i915_reset] *ERROR* Failed to reset chip. output of lspci | grep vga 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) output of /usr/lib/nux/unity_support_test -p IN 12.04 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no The same command in 11.10: stephenm@mcr-ubu1:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes stephenm@mcr-ubu1:~$ output of /var/log/Xorg.0.log [ 11.971] (II) intel(0): EDID vendor "LPL", prod id 307 [ 11.971] (II) intel(0): Printing DDC gathered Modelines: [ 11.971] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 12.770] (II) intel(0): Allocated new frame buffer 2176x800 stride 8704, tiled [ 15.087] (II) intel(0): EDID vendor "LPL", prod id 307 [ 15.087] (II) intel(0): Printing DDC gathered Modelines: [ 15.087] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 33.310] (II) XKB: reuse xkmfile /var/lib/xkb/server-93A39E9580D1D5B855D779F4595485C2CC66E0CF.xkm [ 34.900] (WW) intel(0): flip queue failed: Invalid argument [ 34.900] (WW) intel(0): Page flip failed: Invalid argument [ 34.900] (WW) intel(0): flip queue failed: Invalid argument [ 34.900] (WW) intel(0): Page flip failed: Invalid argument [ 34.913] (WW) intel(0): flip queue failed: Invalid argument [ 34.913] (WW) intel(0): Page flip failed: Invalid argument [ 34.913] (WW) intel(0): flip queue failed: Invalid argument [ 34.913] (WW) intel(0): Page flip failed: Invalid argument [ 34.926] (WW) intel(0): flip queue failed: Invalid argument [ 34.926] (WW) intel(0): Page flip failed: Invalid argument [ 34.926] (WW) intel(0): flip queue failed: Invalid argument [ 34.926] (WW) intel(0): Page flip failed: Invalid argument [ 35.501] (WW) intel(0): flip queue failed: Invalid argument [ 35.501] (WW) intel(0): Page flip failed: Invalid argument [ 35.501] (WW) intel(0): flip queue failed: Invalid argument [ 35.501] (WW) intel(0): Page flip failed: Invalid argument [ 41.519] [mi] Increasing EQ size to 512 to prevent dropped events. [ 42.079] (EE) intel(0): Detected a hung GPU, disabling acceleration. [ 42.079] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. [ 42.598] (II) intel(0): EDID vendor "LPL", prod id 307 [ 42.598] (II) intel(0): Printing DDC gathered Modelines: [ 42.598] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz) [ 51.052] (II) AIGLX: Suspending AIGLX clients for VT switch I know im using the beta version so I'm not expecting it to work but does any one know what the problem may be or even why they Unity compatibility test is describing my video card as vmware when its an intel i915 and Ubuntu is running on the metal not virtualised. Unity 3D worked fine in 11.10

  Read the article

• Speedstep and Intel x5570?

  - by sajal

  Hi, My new server has 2 x X5570 CPUs. Now here is the output of grep -i hz /proc/cpuinfo model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 model name : Intel(R) Xeon(R) CPU X5570 @ 2.93GHz cpu MHz : 1600.231 It always remains the same.. no matter how much load is mysql or any other app hogging. Even when mysql eats 2 or 3 CPUs at 100% each, the output of cpuinfo is the same. If fact mysql performance for some heavy inserts is poorer than my old E5430 server. Any clues? I contacted the server provider, they tried turning off SpeedStep and still we see the same results. Any insights would be helpful cause I am paying heavily for this box and would love to milk all juice i can.

  Read the article

• How to get a higher resolution on Ubuntu 11.04 using an intel chipset

  - by Saif Bechan

  I have a bit slow PC here, so I decided to put Ubuntu 11.04 on it. It use to run Windows Vista on a resolution of 1280x1024, so both my hardware and monitor support it. Now I'm on Ubuntu, but can only run 1024x768, and the screen is not that bright. Its like when you don't have the right drivers on a Windows machine. Now i'm new to linux, so I do not know what do do. I have an onboard Intel chipset i965. Maybe this is some useful information, I read something about it on a forum: lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Can someone please tell me how I can get the screen better? saif@sodium:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9

  Read the article

• Intel data bus of intel 80486 and above CPU

  - by JustAGuy

  Hi, I know this might be hard question, but why does Intel 80486 and above CPUs have doubled 32 bit internal data bus? I mean, ALU is still 32bit wide, so what is that extra 32 bit bus for? Thanks.

  Read the article

• Intel motherboard drops HDMI output after Windows boots

  - by Nick

  I have an Intel motherboard (DH67CL) that uses Intel HD 3000 video. It has two video output ports: HDMI and DVI. Both my monitors are DVI, so I have two cables: a DVI-DVI and an HDMI-DVI. If I plug a monitor into just one of these ports, things work fine. But if I plug monitors into each of the ports, the system startup screens show on both monitors, along with the "Starting Windows..." screen, but as soon as the system boots into Windows, the HDMI-connected monitor goes to sleep. When I use the Intel video control panel, the HDMI-connected monitor is not detected. How do I get a dual-monitor setup to work?

  Read the article

• How well does Intel 3000 HD work on Ubuntu?

  - by Simon

  Right now i have notebook with Nvidia 8400M GS (I know, it's not good card) and it's impossible to work normally when i'll plugin external monitor (1920x1080). Windows 7 can deal with it without problems (1440x900 on notebook + 1920x1080 external). On Ubuntu i have to choose one screen and turn off the second one. Even with only one screen Ubuntu (Unity or even Gnome3) sometimes hangs for a while, I've not found solution for this yet, but nevermind, it's probably because of my card or/and nvidia's drivers. I'm going to buy new PC, but for now only with integrated Intel 3000HD, and my question is: Should i expect similar problems with this card? Here i've found link to Intel's webpage about drivers - "only community develop them", and i'm a bit concerned. I'll use then only one monitor (the bigger one), but how well does those driver work? Are there any performance tests?

  Read the article

• Ubuntu 12.04 OpenCL with Intel and Radeon?

  - by Steve

  I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

  Read the article

• What's the difference between these Intel things?

  - by Coldblackice

  My head still spins with the various Intel "things" that may (or may not) need installing/configuring/yaddayadda'ing: Intel Rapid Storage Technology (is this driver? a software manager/package?), Intel Chipset (i.e., Intel INF Update Utility, Intel RST OROM, Intel RST driver, Intel Matrix Manager, etc. I think I have a basic understanding that the OROM is the low-level BIOS "driver", which communicates with the higher-level RST driver (in Windows). But what's the Chipset Installation software? What's the INF installation/update software? I'm confused as to what the other pieces are (or why there are so many to begin with). And as for a practical matter -- I'm wanting to upgrade my BIOS with a recent Intel OROM included, and then also update the Intel RST drivers in Windows -- BUT, as for the Windows side of things, I don't know what I should uninstall -- the Intel Chipset installer thing (through official uninstaller), Intel RST Manager, finding the individual Intel devices in Device Manager and right-clicking-uninstall/deleting, etc.

  Read the article

• Problems with my Intel HD GC

  - by Stevan Hranisavljevic

  I'm running Ubuntu and I have an Intel HD graphic card, I installed Counter Strike 1.6 and I cannot launch wide screen display mode, parts from the both side of my screen are black. Also when I am playing some clips on YouTube, both sides on the screen are black and I don't see the whole picture. When I click on "About this computer" I'm getting this: Intel® Sandybridge Mobile x86/MMX/SSE2 But I can't find the driver for my Intel GC. I have this driver installed: X.Org X server -- Intel i8xx, i9xx

  Read the article

• How to install new Intel Ethernet driver

  - by Alex Farber

  Ubuntu 12.04 x64 doesn't recognize newest Intel Ethernet adapter on my desktop (Intel Ethernet Connection i217-V). I downloaded required driver from Intel and compiled it using make. Now I have: alex@alex64-six:~$ find / -name 'e1000e.ko' 2>/dev/null /home/alex/Documents/IntelEthernetDriver/e1000e-3.0.4/src/e1000e.ko /lib/modules/3.2.0-64-generic/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko The first line is new driver compiled from Intel sources. The second line is probably existing driver from Ubuntu distribution, which doesn't recognize new Ethernet adapter. How can I apply the new driver instead of existing one? Any other solution is welcome. For now, I cannot upgrade to latest Ubuntu release, because I use some third-party products.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >