Search Results

Search found 32 results on 2 pages for 'khurram aziz'.

Page 1/2 | 1 2  | Next Page >

  • Firefox 3.5.6 causes entire computer to freeze

    - by Anthony Aziz
    Here's the situation: Environment: Just installed a fresh copy of Win7 Pro 32-bit to NTFS partition on 750GB SATA drive Hardware: E8400 3GHz ASUS P5QL Pro 4GB DDR2 1066 RAM EVGA 9800 GTX+ Plenty of cooling, no problems with hardware before Data is stored on a separate partition, including My Documents No security software is yet installed No extensions installed yet Problem: While using Firefox, sometimes the entire computer will freeze/hang. I get no mouse or keyboard input, can't CTRL+ALT+DEL, no "not responding" indication, just a static image on my display. My drivers are all up to date as far as I'm aware (I just installed this copy of Windows last week). I first noticed this when trying to install Xmarks. I went to the Xmarks site and tried to install and it would freeze. I managed to get it installed (Safe mode and the Mozilla addon site worked), but when I go to configure it (log in, etc), the computer freezes. I don't think it's a matter of usage time or memory issues, because while testing, I browsed wallpaper galleries for about 30 minutes, sometimes as many as 12-15 tabs open at a time, without issue. Sometimes I won't even try to install Xmarks at it will hang. I can install (some) other extensions, the only one I've tried is download status bar (which works). What I've done to try to fix: Restarted (duh) Windows safe mode Completely remove Firefox and install it to a new directory, according to Mozilla's KB (I haven't tried the profile manager, though I assume this does the same thing, except perhaps more thoroughly) Some BIOS changes, including Power options, disabling oveclocking (it was a modest overclock on the CPU, which has run Win7 beta and RC for almost a year now) Memtest Used another Windows user profile, same tragic results I'm STUCK now, with no idea what to do. I'm using Chrome as my main browser at the moment, but that's not something I want to be stuck with. I like Firefox and want to use it. I'm going to try creating a new profile first. One thing I did notice: I started leaving task manager and performance monitor open when anticipating (but dreading) a freeze. firefox.exe had low CPU and low memory, but it looked like overall disk usage was seeing some spikes on the small graph Performance Monitor gives you. I saw on one blog post a fellow using XP moved his Local Settings directory from a separate drive to his main drive, and that solved it, but I don't think my AppData directory is on my D: drive, and that's on the same physical device anyways. Still, something that might be worth trying. I'd extremely appreciate any help. Thanks very much. I really don't want to reinstall Windows from scratch again :( Anthony Aziz

    Read the article

  • Gnome Shell Theme Problem on Ubuntu 11.10

    - by Khurram Majeed
    I am trying to install ANewStart GNOME shell themes on Ubuntu 11.10. I have installed gnome shell extension for themes: sudo add-apt-repository ppa:webupd8team/gnome3 sudo apt-get update sudo apt-get install gnome-shell-extensions-user-theme I got the instructions from here ANewStart GNOME Shell Theme + AwOken Icons Theme = Pure Art. But when I go to "Advanced Settings - Shell Extensions" its empty... There is nothing. Also there is a orange triangle sign next to Shell Theme drop down in Advanced Settings - Theme. When I try to run the gnome-tweak-tool from terminal I get following error: imresh@imresh-laptop:~$ gnome-tweak-tool CRITICAL: Error parsing schema org.gnome.shell (/usr/share/glib-2.0/schemas/org.gnome.shell.gschema.xml) Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/gsettings.py", line 45, in __init__ summary = key.getElementsByTagName("summary")[0].childNodes[0].data IndexError: list index out of range WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 145, in __init__ shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Shell not running Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 57, in __init__ self._shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Could not list shell extensions Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 62, in __init__ extensions = self._shell.list_extensions() AttributeError: ShellThemeTweak instance has no attribute '_shell' (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed Please help me in fixing this. I have also restarted the computer many times it does not make a difference.

    Read the article

  • Keyboard freezes / stuck if a key pressed repeatedly

    - by Aziz Rahmad
    I use Acer 4530. This problem has happened long since Ubuntu 10.10 and now that I use 11.04 dual booted with Linux Mint 10. Everytime I press one key repeatedly, like when I read a long article in a website/ebook or when I play games which required me to press arrow keys repeatedly, it would randomly freeze. That is, whatever I press on keyboard has no effect, and that also happens with touchpad. However, the USB mouse works just fine. I later found out that it's not actually freeze but more like it's like the key stuck. For example when I play tetris which I usually press w (down) button repeatedly, after some times it would freeze. And if I put the cursor in, say, browser's address bar, it would type "wwww....." infinitely. The only way I could fix it is by suspend the laptop, either by using mouse or by closing the lid. And instead of suspended, in that case the laptop would automatically wake up and everything will be fine. (Usually my laptop would wake up after suspended by pressing any key) It has happened since the first time I use Ubuntu, 10.10, and it also happens in Linux Mint 10, and until now in Ubuntu 11.04. It never happened when I use Windows, though. Anyone has ever encounter similar problem? Anyone know how to fix it permanently?

    Read the article

  • call function between classes [closed]

    - by aziz joh
    hello I have 3 classes class A, B, and C class A is the main class and content the main function also, i call class B and class C in the main as b1,b2 and c1. in class B there is a vector (V) has list of int. and 3 functions Add, get and delete delete. all the thing in the class is public. in class C i have function that need to (B::get) from b. what I want is that how I can make c1 call get of b1 to return the value of the V in b1 after that use add of b2 to add new item in V of b2. Thanks in advance This is an example class a{ int main(){ b b1,b2; c c1; b1.add(10); b1.add(20); c1.start(); }} class b{ vector<int> v; void add(int i){ v.push_back(i)} int get(){int i=v.at(0); return i;} } class c{// take something from b1 and add it to b2 void play(){ int i=b.get();//should take it from b1 b.add(i*2);//should add it to b2 }} please I need your help I been searching to solve this problem for days.

    Read the article

  • Keyboard freezes / stuck if a key pressed repeatedly

    - by Aziz Rahmad
    I use Acer 4530. This problem has happened long since Ubuntu 10.10 and now that I use 11.04 dual booted with Linux Mint 10. Everytime I press one key repeatedly, like when I read a long article in a website/ebook or when I play games which required me to press arrow keys repeatedly, it would randomly freeze. That is, whatever I press on keyboard has no effect, and that also happens with touchpad. However, the USB mouse works just fine. I later found out that it's not actually freeze but more like it's like the key stuck. For example when I play tetris which I usually press w (down) button repeatedly, after some times it would freeze. And if I put the cursor in, say, browser's address bar, it would type "wwww....." infinitely. The only way I could fix it is by suspend the laptop, either by using mouse or by closing the lid. And instead of suspended, in that case the laptop would automatically wake up and everything will be fine. (Usually my laptop would wake up after suspended by pressing any key) It has happened since the first time I use Ubuntu, 10.10, and it also happens in Linux Mint 10, and until now in Ubuntu 11.04. It never happened when I use Windows, though. Anyone has ever encounter similar problem? Anyone know how to fix it permanently? UPDATE I just recently installed Windows 7 and Windows 8 Development Preview and both have similar symptoms. So I declare that this problem is not OS specific, probably hardware problem.

    Read the article

  • IIS - Tracing Web requests/resposes

    - by Khurram Aziz
    Being developer; I love Fiddler... Is there similar tool/utility (preferably free) for server side tracing the web requests and the responses? I would love some utility which is fiddler like, i-e on start up you select particular IIS web site and it start tracing the requests / response (full content) for debugging purposes.

    Read the article

  • cli commands not working asterisk on ubuntu

    - by Mian Khurram Ijaz
    hi guys today my first day on asterisk on ubuntu. I installed vmware and then ubuntu and then on ubuntu i am running asterisk. i started the asterisk server successfully by following a tutorial. After making few changes into the sip.conf i want to reload the sip.conf i issue the command sip reload and nothing happens neither the commands to restart the asterisk server work actually the commands do not exists can some please throw light or point to right direction. thanks

    Read the article

  • Why my dns server ip got blacklisted instead of my email server ip?

    - by Khurram Masood
    We are hosting our own dns server our scenario is as under; dns ip: a.b.c.1 fqdn:ns1.example.com ------ reverse lookup to a.b.c.1 mail server ip a.b.c.2 mail.example.com ------ reverse lookup to a.b.c.2 smtp.example.com ------ no reverse lookup pop.example.com ------ no reverse lookup web server ip a.b.c.3 example.com ------ reverse lookup to a.b.c.3 www.example.com ------ no reverse lookup a few days back our dns server ip got blacklisted and all our services were down from outside. We had also added a new dns server on a separate network that caused our domain and machines with same names as above to resolve on different ips, can this b a cause of being blacklisted? But all blacklists points towards spamming. Can anyone please explain why my dns ip got blacklisted instead of my email or web server ip?

    Read the article

  • What are the steps to set up a Hyper-V solution with one NIC

    - by Cameron Aziz
    I have successfully installed centos on a virtual machine via Hyper-V on Windows Server 2008 R2. This server has one NIC. I have created a virtual NIC, and virtual subnet, and within the virtual machine (via console) I can ping the gateway. But not google. Is there certain steps I am missing, I feel like I'm one setting away. Im not sure what other information would be useful. Here is the ipconfig of the host: Ethernet adapter vNIC losangeles1_1: Connection-specific DNS Suffix .. : IPv4 Address. . . . . . . . . . . : 10.10.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix .. : IPv4 Address. . . . . . . . . . . : 72.51.43.43 Subnet Mask . . . . . . . . . . . : 255.255.255.192 Default Gateway . . . . . . . . . : 72.51.43.1

    Read the article

  • Outlook 2010 "forgets" password

    - by Cameron Aziz
    I am running Outlook 2010 on Windows 7 Pro x64 on a domain. Outlook is connecting to exchange, and the username and password should be pulled from my logon credentials. The problem is, about every few hours, outlook "forgets" what my password is. In the taskbar, a caution triangle appears, and in the bottom right hand corner of exchange, a "Needs Password" replaces "Connected to Microsoft Exchange." Simply clicking "Needs Password" fixes the issue, and new messages are downloaded. What could the issue be? What could be timing out? Edit: Also, at times the following window appears: This is my Security Settings

    Read the article

  • CentOS: eth0 not starting on boot

    - by Cameron Aziz
    Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

    Read the article

  • DNS on Redhat - rdnc: no server specified and no default

    - by Syahmul Aziz
    Hi all. The error as shown in the 2 pictures below: The configurations for named.conf and the zones files as shown below: After applying "alveso" suggestion below. Now, I think there is no error but I still can't ping my own domain www.p0864868.com (10.0.0.1) nor can I do host or nslookup as shown on previous pictures. PLease assist. Thank you in advance. I also attached my the changes that I made to my named.conf as well as my resolve.conf configs as shown below: progress 2: turned on logging by typping "rndc queylog" The output as below when I pinged p0864868.com progress 3: changed permission of 10-0-0.zone and p086868.zone to 644 named:named Still can't ping www.p0864868.com or execute host command. It says something like network unreachable. I don't understand why it refer to I don't what address is that.

    Read the article

  • Extender controls must be registered using RegisterExtenderControl() before calling RegisterScriptDe

    - by Khurram Aziz
    I am trying to deploy a web application built with Dotnetnuke. There is an DNN Control/ASCX having a MultiView and few AjaxToolkit Controls like AutoComplete, ModalPopup. In Views other (plain) ASCXs are included and some of which have UpdatePanel. On the developer machine (WinXp / ASP.NET Web Server) there is no error...but when I try to deploy it on server, I get the above error.

    Read the article

  • Updating Workflow Task without Correlation Token

    - by Khurram Aziz
    I have inhertied a sequential sharepoint workflow which deals with multiple tasks for different people; multi step approval based on certain condition..For each approval new task is created and monitored...For some reason; we have decided to use single task for the whole workflow and the single task will get assigned to required person at different stages...this will help us reduce the cluter in the task list For refactoring it; I am trying to create "CreateOrUpdateTaskAndWaitForCompletition" activity...so that I can use this component multiple times as per given workflow. Create/Wait branch of my activity works fine; as I have the correlation token within the activity. But when I try two instances of this activity; task is created in first activity and it needs to be updated in second instance where I dont have the correlation token. In the second instance; (Update/Wait branch) I have tried updating the task through code activity but its not working and I am getting "This task is currently locked by a running workflow and cannot be edited" exception! Can I use UpdateTask activity without correlation token? Can I programmatically update the workflow task? Can I programmatically unlock the workflow task?

    Read the article

  • Connecting to Active Directory Application Mode from Perl

    - by Khurram Aziz
    I am trying to connect to Active Directory Application Mode instance. The instance is conenctable from third party LDAP clients like Softerra LDAP Browser. But I am getting the following error when connecting from Perl Net::LDAP=HASH(0x876d8e4) sending: Net::LDAP=HASH(0x876d8e4) received: 30 84 00 00 00 A7 02 01 02 65 84 00 00 00 9E 0A 0........e...... 01 01 04 00 04 84 00 00 00 93 30 30 30 30 30 34 ..........000004 44 43 3A 20 4C 64 61 70 45 72 72 3A 20 44 53 49 DC: LdapErr: DSI 44 2D 30 43 30 39 30 36 32 42 2C 20 63 6F 6D 6D D-0C09062B, comm 65 6E 74 3A 20 49 6E 20 6F 72 64 65 72 20 74 6F ent: In order to 20 70 65 72 66 6F 72 6D 20 74 68 69 73 20 6F 70 perform this op 65 72 61 74 69 6F 6E 20 61 20 73 75 63 63 65 73 eration a succes 73 66 75 6C 20 62 69 6E 64 20 6D 75 73 74 20 62 sful bind must b 65 20 63 6F 6D 70 6C 65 74 65 64 20 6F 6E 20 74 e completed on t 68 65 20 63 6F 6E 6E 65 63 74 69 6F 6E 2E 2C 20 he connection., 64 61 74 61 20 30 2C 20 76 65 63 65 00 __ __ __ data 0, vece.` My directory structure is Partition: CN=Apps,DC=MyCo,DC=COM User exists as CN=myuser,CN=Apps,DC=MyCo,DC=COM I have couple of other entries of the custom class which I am interested to browse; those instances appear fine in ADSI Edit, Softerra LDAP Browser etc. I am new to Perl....My perl code is #!/usr/bin/perl use Net::LDAP; $ldap = Net::LDAP->new("127.0.0.1", debug => 2, user => "CN=myuser,CN=Apps,DC=MyCo,DC=COM", password => "secret" ) or die "$@"; $ldap->bind(version => 3) or die "$@"; print "Connected to ldap\n"; $mesg = $ldap->search( filter => "(objectClass=*)" ) or die ("Failed on search.$!"); my $max = $mesg->count; print "$max records found!\n"; for( my $index = 0 ; $index < $max ; $index++) { my $entry = $mesg->entry($index); my $dn = $entry->dn; @attrs = $entry->attributes; foreach my $var (@attrs) { $attr = $entry->get_value( $var, asref => 1 ); if ( defined($attr) ) { foreach my $value ( @$attr ) { print "$var: $value\n"; } } } } $ldap->unbind();

    Read the article

  • IIS is closing connection on dynamic content

    - by Khurram
    there is a strange problem i am facing, if any of you might have seen before i have freshly install OS (Windows 2003 SP2) and just have configured IIS on it...and on the default site...the static content say hello.htm is working fine...but any dynamic content like hello.asp (classic asp) or hello.aspx (asp.net) is not working if i telnet and issue http headers manually...for static content it works...but for dynamic content...IIS is basically forcefully closing the connection there's nothing in event logs any clues....?

    Read the article

  • Can we use the task list from "another" web site of same site collection as task list for Sharepoint

    - by Khurram Aziz
    Can I specify/use an existing task list from "another" website but from same site collection to be used in my Sequential Sharepoint Workflow? I am using Visual Studio to code the workflow, and it will be deployed in /subsite, the root site already has a task list to which everyone has connected to Outlook etc...Instead of creating a new task list in /subsite and asking concerned to subscribe to this new task list...I want to use the existing one..

    Read the article

  • Migrating VseWss project to WspBuilder

    - by Khurram Aziz
    I have a VseWss project that I want to migrate to WspBuilder. The project has many features (Content Types, Fields, Lists, Event Listeners, Workflows, ASPX files, their code behind etc) and the project references couple of other assemblies as well. And it does the SafeControls entries and deploys the assemblies into GAC etc Important aspect is; the WSP that gets created from the VseWss is deployed to the production server and while migrating I want to preserve all of these things so that when I create the WSP from WspBuilder things are transparent for the Sharepoint Administrators. Please guide me how to proceed...any online tutorial or related stuff that talks about migrating a real world VseWss project (with 10-20 different types of features)

    Read the article

  • Storing Configurations into Active Direcotry Application Mode

    - by Khurram Aziz
    I have a network devices polling and do actions kind of app; currently it keeps the configuration (which devices to poll, what kind of device, ip, login, password etc) in the database. My network administrator wants that this information is stored in some LDAP server so that he maintain single store of configuration which he himself can use in other apps/scripts etc. I am looking for some article that walks me through setting up ADAM/AD LDS for storing configuration by authoring custom schema etc and how to setup some authentication infrastructure to protect the data.

    Read the article

  • Android RelativeLayout fill_parent unexpected behavior in a ListView with varying row heights

    - by Jameel Al-Aziz
    I'm currently working on a small update to a project and I'm having an issue with Relative_Layout and fill_parent in a list view. I'm trying to insert a divider between two sections in each row, much like the divider in the call log of the default dialer. I checked out the Android source code to see how they did it, but I encountered a problem when replicating their solution. To start, here is my row item layout: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout android:id="@+id/RelativeLayout01" android:layout_width="fill_parent" xmlns:android="http://schemas.android.com/apk/res/android" android:padding="10dip" android:layout_height="fill_parent" android:maxHeight="64dip" android:minHeight="?android:attr/listPreferredItemHeight"> <ImageView android:id="@+id/infoimage" android:layout_width="wrap_content" android:layout_height="wrap_content" android:clickable="true" android:src="@drawable/info_icon_big" android:layout_alignParentRight="true" android:layout_centerVertical="true"/> <View android:id="@+id/divider" android:background="@drawable/divider_vertical_dark" android:layout_marginLeft="11dip" android:layout_toLeftOf="@+id/infoimage" android:layout_width="1px" android:layout_height="fill_parent" android:layout_marginTop="5dip" android:layout_marginBottom="5dip" android:layout_marginRight="4dip"/> <TextView android:id="@+id/TextView01" android:textAppearance="?android:attr/textAppearanceLarge" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerVertical="true" android:layout_toRightOf="@+id/ImageView01" android:layout_toLeftOf="@+id/divider" android:gravity="left|center_vertical" android:layout_marginLeft="4dip" android:layout_marginRight="4dip"/> <ImageView android:id="@+id/ImageView01" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentLeft="true" android:background="@drawable/bborder" android:layout_centerVertical="true"/> </RelativeLayout> The issue I'm facing is that each row has a thumbnail of varying height (ImageView01). If I set the RelativeLayout's layout_height property to fill_parent, the divider does not scale vertically to fill the row (it just remains a 1px dot). If I set layout_height to "?android:attr/listPreferredItemHeight", the divider fills the row, but the thumbnails shrink. I've done some debugging in the getView() method of the adapter, and it seems that the divider's height is not being set properly once the row has it's proper height. Here is a portion of the getView() method: public View getView(int position, View view, ViewGroup parent) { if (view == null) { view = inflater.inflate(R.layout.tag_list_item, parent, false); } The rest of the method simply sets the appropriate text and images for the row. Also, I create the inflater object in the adapter's constructor with: inflater = LayoutInflater.from(context); Am I missing something essential? Or does fill_parent just not work with dynamic heights?

    Read the article

  • Changelog file: YAML vs JSON vs CSV

    - by Aziz Light
    Hello everybody. I am creating a simple Changelog lib in CodeIgniter that will basically log a message everytime someone adds, deletes, changes or publish a blog post. I will log messages in files by batches of 300. So every 301st message will go in a new file. At first I wanted to write the logs to simple .log files but then I got the idea to actually style the thing and I had to seperate each "attribute" of each message (ie: the user, the message, the type of the log, etc.). So .log files are out of the question since extracting the info would be a pain. What is the most appropriate format for such a task? I already ruled out MySQL and XML because they are too heavy (especially considering that the log files won't exceed (about) 300 lines). I suggested YAML vs JSON vs CSV in the title, but is there yet a better alternative?

    Read the article

  • HTML table to “graphical text” for code comments

    - by Atif Aziz
    Is there a tool (ideally command-line-based) that can help in converting the source to HTML tables into “graphical text” (think perhaps ASCII art for HTML tables) for use in code comments (like /*…*/), as show below? /* +--------------------------------------------------------------------+ | Network | +--------------------------------------------------------------------+ | 11.05.2010 | ABC | DEF | +------------+-------------+-------------+-------------+-------------+ | | INPUT | OUTPUT | INPUT | OUTPUT | +------------+-------------+-------------+-------------+-------------+ | Value | 366,899,791 | 0 | 213,001 | 2,132,827 | +------------+-------------+-------------+-------------+-------------+ */ Background: A piece of code that reads values from HTML tables can be annotated with comments depicting text-based graphical representations of complex HTML table layouts. Someone maintaining the code later can then find it easier to understand, for example, how a piece of code is slicing and dicing an HTML table or plucking values at certain cell positions.

    Read the article

  • What (kind of) project could I create to learn JavaScript?

    - by Aziz Light
    Hello, I started learning JavaScript a while ago. It's a fairly easy programming language considering that I learned Java in university, that I know php pretty well and that I already played around with python and ruby. The problem is that to properly learn a programming language I usually create a project. In javascript, I just don't know what kind of project I could create - that is, a project that is not web-based or related to the web browser. Can I create javascript shell scripts? Where is javascript commonly used beside the web browsers? So, can someone actually give me some ideas please?

    Read the article

  • Are Symphony and CakePHP too slow to be usable?

    - by Aziz Light
    Until now, I have always said that CakePHP is too bloated and slow. I don't really know that, I just saw "some" benchmarks. What I really want to know, is that if those two frameworks (Symfony and CakePHP) are too slow to be usable in a way that the user will get frustrated. I already know that those frameworks are slower than other alternatives, but that's not the question. I ask the question because I want to create a project management web application and I still hesitate between a couple frameworks. I've had some trouble learning Zend, but imho I haven't tried hard enough. So in conclusion, in addition to the first question above, I would like to ask another question: If I want to create a project management tool (which is a pretty big project), which of the following should you suggest, considering the developement time, the speed of the resulting application, and the robustness of the final product: Symphony CakePHP Zend Framework Also I should mention that I don't know any of those frameworks, and that I want to learn one of them (at least).

    Read the article

1 2  | Next Page >