Search Results

Search found 299 results on 12 pages for 'mic e'.

Page 1/12 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • 3.5mm Headphone and Mic --> 3.5mm Headphone and 3.5mm Mic

    - by Taylor Price
    I am looking for a way to take the plug from a ear bud and mic set (e.g. the VModa Vibe Duo) and split it into separate headphone and mic 3.5mm plugs so that I can plug into my computer. Has anybody seen such a splitter? (Yes, I have done some quick searching for it) Thanks in advance. The reason why if you care to read this far is that I work from home and long conference calls with a big set of over-the-hear headphones can get tiring. Thus, I'd like to try with a nice ear bud/mic set and see if that is more comfortable.

    Read the article

  • Bad sound quality of 3.5mm headphone with mic on laptop

    - by Isaac
    I have a set of headphones that have a built-in mic for hands-free calling. They just work great on my Sony Ericsson Cedar cellphone. The problem is that when I connect headphone to my Dell N5010 laptop to listen to music, the quality is horrible, with very weak or no vocals. They funny part is when I hold down the talk button on the mic (headphone mic), at which point it sounds great, but goes back to bad quality as soon as I release talk button. Also, when I take out the jack a little, at some point, the sound is great but I have to hold the jack there. I looked for any configuration on the sound card driver but find nothing. Besides using a glue to hold down the talk button of mic :), is there any other solution?

    Read the article

  • How to debug ssh authentication failures with gssapi-with-mic

    - by Arthur Ulfeldt
    when i ssh to DOMAIN\user@localhosts-name authentication works fine through gssapi-with-mic: debug3: remaining preferred: gssapi,publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug2: we sent a gssapi-with-mic packet, wait for reply debug3: Wrote 112 bytes for a total of 1255 debug1: Delegating credentials debug3: Wrote 2816 bytes for a total of 4071 debug1: Delegating credentials debug3: Wrote 80 bytes for a total of 4151 debug1: Authentication succeeded (gssapi-with-mic). when I connect to a different machine It just seems to stop half way through the gssapi-with-mic authentication: debug1: Next authentication method: gssapi-with-mic debug2: we sent a gssapi-with-mic packet, wait for reply debug3: Wrote 112 bytes for a total of 1255 debug1: Delegating credentials debug3: Wrote 2816 bytes for a total of 4071 <----- ???? debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive How should I go about finding out what happened differently the second time. How can I find out if/why the auth was rejected by kerberos?

    Read the article

  • Internal mic not working on Aspire One D255

    - by user50652
    I can't get my internal mic to work with any app other than Sound Recorder. I've scoured the other posts on this topic and none seem to have an answer. I've installed Alsa Mixer, Pulse Audio controls, tried minimising one of the stereo channels but nothing works. The mic is not muted. There is no function key on the keyboard to mute the mic either. The only connector options are analogue mic or analgue input. Neither do anything.

    Read the article

  • Detect blow in Mic and do something {iPhone SDK}

    - by Momeks
    Hi , i found this tutorial , and it's good , but doesn't work for me ! here is the code : - (void)listenForBlow:(NSTimer *)timer { [recorder updateMeters]; const double ALPHA = 0.05; double peakPowerForChannel = pow(10, (0.05 * [recorder peakPowerForChannel:0])); lowPassResults = ALPHA * peakPowerForChannel + (1.0 - ALPHA) * lowPassResults; if (lowPassResults > 0.95) NSLog(@"Mic blow detected"); //change the background color e.g ! } in the console show me the nslog reseult like this (without any bowling !): 2010-04-11 23:32:27.935 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:27.965 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:27.995 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.026 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.055 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.086 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.115 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.145 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.175 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.205 MicBlow[2358:207] Mic blow detected 2010-04-11 23:32:28.236 MicBlow[2358:207] Mic blow detected i change this value : if (lowPassResults < 0.95) to if (lowPassResults > 0.95) so it seems work ! but doesn't chage anything , again if i put the background changing code the , my code change background but without any bowling !! what's the problem ?

    Read the article

  • About the new Microsoft Innovation Center (MIC) in Miami

    - by Herve Roggero
    Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/08/21/about-the-new-microsoft-innovation-center-mic-in-miami.aspxLast night I attended a meeting at the new MIC in Miami, run by Blain Barton (@blainbar), Sr IT Pro Evangelist at Microsoft. The meeting was well attended and is meant to be run as a user group format in a casual setting. Many of the local Microsoft MVPs and group leaders were in attendance as well, which allows technical folks to connect with community leaders in the area. If you live in South Florida, I highly recommend to look out for future meetings at the MIC; most meetings will be about the Microsoft Azure platform, either IT Pro or Dev topics. For more information on the MIC, check out this announcement:  http://www.microsoft.com/en-us/news/press/2014/may14/05-02miamiinnovationpr.aspx. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

    Read the article

  • {solved}stream TV audio through mic input?

    - by Drew S
    I have a gaming headset and use it with a few devices and am looking for a way to stream my audio through my pc from tv through the mic jack and then through the optical out. the system is detecting sound from the mic port. I would put this directly through the headset but that port is being used by my ps3. So I would like a way as I said to stream it through my pc to my headset, and it be great to have an integrated volume option in the sound drop down too. [TV - mic - Ubuntu - headset(optical out)] Ubuntu 13.04 EDIT I found part of a solution. Solution by installing pavucontrol and using "pactl load-module module-loopback latency_msec=1" I can stream the audio through my pc.

    Read the article

  • Internal Mic not working on Dell Adamo 13

    - by AFD
    So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

    Read the article

  • Android app not releasing mic/speaker

    - by SeaRoth
    I have a VOIP application that blocks the microphone and speaker after using it! Steps to reproduce: Place a call on 4G (both mic and speaker work) Place a call on app (both mic and speaker work) Place a call on 4G (Neither mic nor speaker work) Steps to fix mic and speaker: Open applications / Voice Recorder Record something quickly Place call (both mic and speaker work) I have 2 classes with about 300 lines of code each: RtpStreamReceiver RtpStreamSender Am I not releasing something?

    Read the article

  • Internal Mic Ubuntu 12.04 on Compaq Presario CQ50

    - by Genius FDE
    I have problem with the internal microphone not working on Ubuntu 12.04. It looks like a common problem on most of the laptops running ubuntu 12.04. I tried a lot of possible solutions available online but nothing seems to work! sudo aplay -l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 By the way, the Laptop has no HDMI port! I've seen the same problem with Sony laptop but the mic was working with too much static noise. Thank you.

    Read the article

  • Can't get my Blue Snowflake Mic to work

    - by TheNerdAL
    It was working fine when I bought it. I think it was an update or something that made it stop. I don't think the Mic is broken, at least I hope not. Can anyone help? Please? I need it before tommorrow. I'm working on a video. I get this when I check the terminal for what USB devices are connected: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 2525:8912 Bus 003 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 003 Device 002: ID 056a:00d2 Wacom Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks.

    Read the article

  • How to enable Mic in Wine (pulseaudio)

    - by Postadelmaga
    I'm not able to make mic work with wine 1.5 I found some suggestions but they don't seem to work: -Disable winepulse.drv (aka: PulseAudio): "A1: Go to winecfg, in the tab 'libraries', enter 'winepulse.drv' in the box and click on add, click yes on the warning. Select winepulse.drv and change load order to 'disabled'. Now try to trigger your bug again, if it was a winepulse bug it shouldn't trigger any more. A2 (easier and preferred): From 1.5.3 onward, launch your program with WINENOPULSE=1 wine program.exe to temporarily disable winepulse for that program." reference: http://ubuntuforums.org/showthread.php?t=1960599

    Read the article

  • Can't get my Blue Snowflake Mic to work

    - by TheNerdAL
    It was working fine when I bought it. I think it was an update or something that made it stop. I don't think the Mic is broken, at least I hope not. Can anyone help? Please? I need it before tommorrow. I'm working on a video. I get this when I check the terminal for what USB devices are connected: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 2525:8912 Bus 003 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 003 Device 002: ID 056a:00d2 Wacom Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks.

    Read the article

  • Mic not working on Lenovo G470

    - by Caveman
    I used a Lenovo G470 laptop (Core i5 2410M processor, AMD Radeon 6370M and 2GB DDR3 RAM) and I installed Ubuntu 12.04. I can't get the microphone to work. I encountered this type of issue before in my old Acer Aspire One with Ubuntu 10.04/10.10, and installing PulseAudio Volume Control and tweaking a little solves the problem. I tried the same solution to no avail in 12.04. I tried entering the alsa in terminal and my mic is not detected there. Does anybody encountered a similar problem? Any help will be greatly appreciated.

    Read the article

  • ssh key error - Permission denied (publickey,gssapi-keyex,gssapi-with-mic)

    - by user1963938
    Amazon Ec2 :: Redhat 6. 64 Bit I'm trying to follow the socks5 guidelines (http://www.catonmat.net/blog/linux-socks5-proxy/ ) to open a socks on one of our servers but unfortunately I got suck at step 1 . ssh -N -D 0.0.0.0:1080 localhost I get error Permission denied (publickey,gssapi-keyex,gssapi-with-mic). How do I fix it ? More debug info ssh -v -f -N -D 0.0.0.0:1080 localhost OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

    Read the article

  • Super key to pause, mute mic, and mute speakers in windows

    - by Bruce Connor
    EDIT:Just rephrasing the question: Does anyone know how to mute the mic using autohotkey? Here's why I need it: Whenever someone walks in my office I have to pause the media player. Sometimes, when I'm watching a video, I also have to mute the headphone speakers. And if I'm on a skype call I have to mute the mic. I want to assign all those functions to a single hotkey for convienience (probably the "mute" or "play/pause" key) and I'm pretty sure autohotkey can do that, but I don't know how to mute the mic using autohotkey. Plus, I also want to assign all reverse commands (play and unmute) to a single key (could be a different one or the same one). (I don't think it matters, but I'm using windows 7)

    Read the article

  • Stop playback of my voice when using mic during a call with twinkle voip

    - by ageis23
    Hi When I'm making voip calls with twinkle I can hear myself via the speakers. It's not like an echo you might get in empty room for example. While this is useful if you're trying to check if your mic is working, it's annoying when you're trying to have a conversion. Constantly trying to filter out your own voice. I'm using twinkle as my client. Is it my client or is it a setting on my ATA/ mic configuration?

    Read the article

  • Mac internal mic not working with Xlite

    - by Pablo Fernandez
    I've used xlite for a while now but all of the sudden the internal mic from my mac stopped to work with it. It does call, and you can see the red bar rising but the other person can't hear a thing. The mic does work when using Skype so I think it's a problem with Xlite Things I've already tried: Reconfigure Xlite Reinstall Xlite Install Xlite Beta (After every step I rebooted the macbook) Obviously none of them worked. Thanks

    Read the article

  • Bluetooth headset A2DP works, HSP/HFP not (no sound/no mic)

    - by Stefan Armbruster
    My Philips SBH9001 headset pairs fine using Ubuntu 12.04. In the audio settings it's properly detected as A2DP device and as HSP/HFP device. Hardware: Thinkpad X230, Ubuntu 12.04 64bit, Kernel 3.6.0-030600rc3-generic (build from Ubuntu mainline repo), Bluetooth device is USB-Id 0a5c:21e6 from Broadcom, Headset is a Philips SBH9001. Note: Kernel 3.6 rc3 is used because of a fix for audio on the dockingstation that is not in any previous branches. Playing audio in A2DP works just fine out of the box, but when switching the headset to HSP/HSP mode there is no sound nor does the microphone work. When connecting the headset, /var/log/syslog shows: Aug 25 21:32:47 x230 bluetoothd[735]: Badly formated or unrecognized command: AT+CSRSF=1,1,1,1,1,7 Aug 25 21:32:49 x230 rtkit-daemon[1879]: Successfully made thread 17091 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:32:49 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:32:50 x230 kernel: [ 4860.627585] input: 00:1E:7C:01:73:E1 as /devices/virtual/input/input17 When switching from A2DP (standard profile) to HSP/HFP: Aug 25 21:34:36 x230 bluetoothd[735]: /org/bluez/735/hci0/dev_00_1E_7C_01_73_E1/fd3: fd(34) ready Aug 25 21:34:36 x230 rtkit-daemon[1879]: Successfully made thread 17309 of process 14713 (n/a) owned by '1000' RT at priority 5. Aug 25 21:34:36 x230 rtkit-daemon[1879]: Supervising 4 threads of 1 processes of 1 users. Aug 25 21:34:41 x230 bluetoothd[735]: Audio connection got disconnected Any hints how to get HSP/HFP working here?

    Read the article

  • mic on cam don't work

    - by ezz9
    the cam works. I pull up PulseAudio I can see it pick me up for 1sec then stops. don't work on Skype I've tried every USB port same thing it worked on 10.04 fine. but now I'm on 12.04 and it don't work. it is a logitech B500 desktop:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 046d:0807 Logitech, Inc. Webcam B500 Bus 003 Device 002: ID 03f0:6104 Hewlett-Packard DeskJet 5650c Bus 005 Device 002: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for Notebooks I have changed some setting in flash Player Settings Manager, I don't think it would affect it after all the cam is still working it's the microphone that freezes up, but thought I would tell you this, info is good.

    Read the article

  • Mic not working when vga connector removed

    - by yygyt
    I have a computer that should run continuously without any connection to a monitor. For developmental purposes I have been keeping the vga connection with the monitor and experienced no problem until now. When I start the machine removing the vga connection beforehand, external microphone does not work. At first I didn't know anywhere to look and see the problem, but after a google search I saw that there is a command as alsamixer I ssh the machine end type alsamixer when it is connected to the monitor, here is the result If I remove monitor connection and reboot again, and then type alsamixer, I see the error, $ alsamixer cannot open mixer: No such file or directory I suspect that this error is related to X somehow. I really don't know anything about what goes beyond. This machine needs to work without any connection to a monitor. I would deeply appreciate any suggestions.

    Read the article

  • How to get the mic on the Creative X-Mod soundcard working correctly?

    - by Nyamiou The Galeanthrope
    Well, I have this problem for a while now. When my computer start the mic seem to work but it's like it's muted. I have to go to a terminal and type alsamixer -c 1 and then I set up PCM Capture Source on Line and set up it back to Mic to get the mic actually working. Is there is a way to do this automatically or to solve the problem. I use a special workaround on this card because of the bug #429642. My workaround is having this at the end of my /usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf : [Mapping xmod-stereo-out] device-strings = surround51:%f description = Analog Stereo Creative Xmod channel-map = front-left,front-right paths-output = analog-output analog-output-headphones analog-output-mono analog-output-lfe-on-mono paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line priority = 10 Maybe the bug come from here, maybe I have to change something. Thank you for any help.

    Read the article

  • No sound through headset - only mic is working

    - by Kristis
    I noticed that no sound is being played to my headphones. The laptop has a conexant sound card together with the sounds apps provided. But the thing is that I also noticed that now instead of one playback device - 2 are presented: speakers and headphones. And while speakers do play sound nicely - even test sound are not played through headphone output. Also, headphone output does not have a jack assigned to it, while speakers have L R Rear panel Analog Jack(my laptop does not have a jack on the back - only on the right). Also - my headphones have a mic as well - and when I plug it in - the mic is working(using top panel digital jack),but the headphones themselves are not. And laptop is recognizing when audio device is plugged in. And I checked the headset on other devices - the headphones are working. I have tried updating drivers, rolling back drivers and completely uninstalling drivers and then restarting - nothing helped. I imagine that I somehow need to reconfigure the jack configuration just have no idea how and where. Any suggestions? Thanks

    Read the article

  • Key to mute my Skype mic?

    - by lo_fye
    I'm using a Mac. Is there a keyboard shortcut for muting the mic during a call? I can't find one, and I often need to toggle mute/unmute. Clicking the button on the Skype interface is very inconvenient :(

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >