Search Results

Search found 1370 results on 55 pages for 'nat gr'.

Page 1/55 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Cisco 881 losing NAT NVI translation config after reload

    - by MasterRoot24
    This is a weird one, so I'll try to explain in as much detail as I can so I'm giving the whole picture. As I've mentioned in my other questions, I'm in the process of setting up a new Cisco 881 as my WAN router and NAT firewall. I'm facing an issue where NAT NVI rules that I have configured are not enabled after a reload of the router, regardless of the fact that they are present in the startup-config. In order to clarify this a little, here's the relevant section of my current running-config: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 ...and here's the mappings 'in action': Router1#show ip nat nvi translations | include --- tcp <WAN IP>:25 192.168.1.x:25 --- --- tcp <WAN IP>:80 192.168.1.x:80 --- --- tcp <WAN IP>:143 192.168.1.x:143 --- --- tcp <WAN IP>:443 192.168.1.x:443 --- --- tcp <WAN IP>:587 192.168.1.x:587 --- --- tcp <WAN IP>:993 192.168.1.x:993 --- --- tcp <WAN IP>:1723 192.168.1.x:1723 --- --- ...and here's proof that the mappings are saved to startup-config: Router1#show startup-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 However, look what happens after a reload of the router: Router1#reload Proceed with reload? [confirm]Connection to router closed by remote host. Connection to router closed. $ ssh joe@router Password: Authorized Access only Router1>en Password: Router1#show ip nat nvi translations | include --- Router1# Router1#show ip nat translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Here's proof that the running config should have the mappings setup as NVI: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 At this point, the mappings are not working (inbound connections from WAN on the HTTP/IMAP fail). I presume that this is because my interfaces are using ip nat enable for use with NVI mappings, instead of ip nat inside/outside. So, I re-apply the mappings: Router1#configure ter Router1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router1(config)#ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 Router1(config)#ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 Router1(config)#ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 Router1(config)#ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 Router1(config)#ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 Router1(config)#ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 Router1(config)#ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 Router1(config)#end ... then they show up correctly: Router1#show ip nat nvi translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Router1#show ip nat translations | include --- Router1# ... furthermore, now from both WAN and LAN, the services mapped above now work until the next reload. All of the above is required every time I have to reload the router (which is all too often at the moment :-( ). Here's my full current config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip access-group 101 in ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 access-list 101 permit udp 193.x.x.0 0.0.0.255 any eq 5060 access-list 101 deny udp any any eq 5060 access-list 101 permit ip any any ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end I'd appreciate it greatly if anyone can help me find out why these mappings are not setup correctly using the saved config after a reload.

    Read the article

  • asterisk/freeswitch in nat/no-nat setup

    - by pQd
    hi, my current setup - i use bunch of sip hard-phones around few offices. all devices have two sip accounts configured - one on internal sip proxy [for calls between the branches], another - at 3rd party voip providers [ since it's in different countries - those are different providers, but that's irrelevant ]. i was thinking about terminating sip calls on something like asterisk/freeswitch server and having all sip-devices log on just once to such server[s] - mostly to provide things like voicemail, groupcalls, redirections etc. it seems perfectly doable but there is one problem - i cannot find examples how to prepare for nat/no nat. for calls routed to from/to 3rd party voip operator - i'll need handling for nat/stun etc, but for handling of internal calls - i do not want any nat, all traffic should go via vpns to different branches. can you provide me some hints how to configure it? any tutorials? thanks!

    Read the article

  • IPtables AWS EC2 NAT/Reverse NAT - For Reverse Proxy style setup but with IPtables

    - by Mark
    I was thinking initially needing to do a reverse proxy or something so I could get some SSL/TLS traffic look like it is being terminated at a server and IP address in the AWS cloud, and then that traffic is forwarded onto our actual web servers that aren't in the cloud... I've not done much iptables pre and post routing before Dnat or Snat which I know are the things I need or a combination of the things I need in order achieve what i'm trying. Things to note:- Client/User - Must not be able to see backend IP address and only see the IP address of the cloud box https (TLS/SSL) - connection shouldn't be terminated at the cloud box, it should act like a router almost EC2 instance - Has only one network interface available to play with... this is thus an (internet <- internet) type of routing going on. EC2 instance IP address is already more or less behind a NAT that I have no control over, for example... Public ip address could be 46.1.1.1 but instance IP will be 10.1.1.1. Connections from client will go to 46.1.1.1 which will end up at the instance and on interface 10.1.1.1. The connection from the client then needs to be forwarded (DNAT) onto the backend web servers which are back out on the internet (SNAT). Possibly a part of the problem could be that the SNAT will need to be set to the external interface of the instance and I wonder if this makes it harder for IPtables to track the connection? So looking to basically, have it look as though connections are terminating at this server and its IP address. Whereas all that's really happening is the https request and connection is being forwarded straight onto another internet facing web server. How possible does that sound?

    Read the article

  • Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

    - by MasterRoot24
    I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

    Read the article

  • Amazon EC2 Nat Instance - goes out but not back in

    - by nocode
    I've followed Amazon's steps and list what I've done. I've created 6 subnets (4 private SN1: 10.50.1.0/24, SN2: 10.50.2.0/24, SN3: 10.50.3.0/24, SN4: 10.50.4.0/24) and 2 public (SN5: 10.50.101.0/24 and SN6: 10.50.102.0/24) -I have a Bastion host and a NAT instance on SN5 and assigned EIP's to both. I created a test instance on SN1. edit: -NAT instance has source/destination check disabled -On the NAT instance, I had enabled the following commands to be bootstrapped: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/16 -j MASQUERADE -In my VPC, the private subnets have their own route table and configured 0.0.0.0/0 to the NAT instance with 4 subnets being associated with the route table. I have a second route table for my public subnets and 0.0.0.0/16 is pointed towards the IGW (with the other 2 subnets associated with it). -For Security Groups, I have the NAT instance accepting all traffic on each of the 4 subnets and all OUTBOUND traffic is allowed. For my test server, I have allowed all outbound access and have allowed all traffic from the public subnet of the NAT host. I can ping internally with no issues. On my test instance, if I try to ping google.com, DNS resolves however I don't get a reply back. On my NAT instance, I run a tcpdump and can see the request being requested to google.com but it's not sending the reply back. My NAT host can ping and receive a reply from google. From the test host, when I ping the NAT instance, the tcpdump shows a request and receive. Is there something I'm missing? EDIT: I've figured it out - I had to save the iptable config and restart the service.

    Read the article

  • SubDomain creation issue.Ubuntu 12.04 Apache 2.22 Webmin

    - by anarchos78
    I have a technical question concerning subdomains. My installation is UBUNTU 12.04 and WEBMIN for administration (using Apache web server). I am trying to create a subdomain to one IP (the domain is www.ithemis.gr and I want to create test.ithemis.gr and/or test1.ithemis.gr) with no success. I think I've tried the right way to set subdomains. The address does not resolving (I have already created DNS records via BIND). Do you have any suggestions? I am very new in server administration. Any help will be greatly appreciated! Apache configuration: In /etc/apache2/sites-available: Conf file:www.ithemis.gr.conf (main website) <VirtualHost 184.171.255.110:80> DocumentRoot /home/ithemis.gr ServerName www.ithemis.gr <Directory "/home/ithemis.gr"> allow from all #Options +Indexes Options +Includes -Indexes </Directory> </VirtualHost> Conf file:www.test.ithemis.gr.conf (subdomain website): <VirtualHost *:80> DocumentRoot /home/test.ithemis.gr ServerName test.ithemis.gr <Directory "/home/test.ithemis.gr"> allow from all Options +Indexes </Directory> </VirtualHost> My DNS records: Master Zone: ithemis.gr Name Type TTL Values ithemis.gr. NS Default ns1.themis.gr. ithemis.gr. A Default 184.171.255.110 ns1.ithemis.gr. A Default 184.171.255.110 ns2.ithemis.gr. A Default 184.171.255.110 mail.ithemis.gr. A Default 184.171.255.110 www.ithemis.gr. CNAME Default ithemis.gr. ithemis.gr. MX Default 5 mail.ithemis.gr. www.test.ithemis.gr. CNAME Default ithemis.gr. test.ithemis.gr. CNAME Default ithemis.gr.

    Read the article

  • Cisco IPSec, nat, and port forwarding don't play well together

    - by Alan
    I have two Cisco ADSL modems configured conventionally to nat the inside traffic to the ISP. That works. I have two port forwards on one of them for SMTP and IMAP from the outside to the inside this provides external access to the mail server. This works. The modem doing the port forwarding also terminates PPTP VPN traffic. There are two DNS servers one inside the office which resolves mail to the local address, one outside the office which resolves mail for the rest of the world to the external interface. That all works. I recently added an IPSec VPN between the two modems and that works for every thing EXCEPT connections over the IPSec VPN to the mail server on port 25 or 143 from workstations on the remote lan. It would seem that the modem with the port forwards is confusing traffic from the mail server destined for a machine on the other side of the IPSec VPN for traffic that should go back to a port forward connection. PPTP VPN traffic to the mail server is fine. Is this a scenario anybody is familiar with and are there any suggestions on how to work around it? Many thanks Alan But wait there is more..... This is the strategic parts of the nat config. A route map is used to exclude the lans that are reachable via IPSec tunnels from being Nated. int ethernet0 ip nat inside int dialer1 ip nat outside ip nat inside source route-map nonat interface Dialer1 overload route-map nonat permit 10 match ip address 105 access-list 105 remark *** Traffic to NAT access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.9.0 0.0.0.255 access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.48.0 0.0.0.255 access-list 105 permit ip 192.168.1.0 0.0.0.255 any ip nat inside source static tcp 192.168.1.241 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.241 143 interface Dialer1 143 At the risk of answering my own question, I resolved this outside the Cisco realm. I bound a secondary ip address to mail server 192.168.1.244, changed the port forwards to use it while leaving all the local and IPSec traffic to use 192.168.1.241 and the problem was solved. New port forwards. ip nat inside source static tcp 192.168.1.244 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.244 143 interface Dialer1 143 Obviously this is a messy solution and being able to fix this in the Cisco would be preferable.

    Read the article

  • Ubuntu 12.04 LXC nat prerouting not working

    - by petermolnar
    I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

    Read the article

  • how to access samba shares via nat?

    - by HSM
    I have setup a virtual machine in Virtual Box and installed a Samba Server. I changed the guest operating system's NIC from Bridged to NAT for a reason that I can't remember. I then added a additional NIC in "host only adapter" mode. The Windows host OS now can access the Ubuntu 10.10 virtual server via the Host Only NIC. However, I can not access the Samba server running on the Ubuntu guest OS. I am not sure what to do now. How can I get the widows Host OS to access the Guest OS' samba server.

    Read the article

  • SIP and NAT routers?

    - by OverTheRainbow
    Hello SIP was not built with NAT routers in mind, and I'd like to get to the bottom of this issue to check what needs to be done on all devices so it works with NAT routers, and understand in what context it just can't be used and I should check more NAT-friendly alternatives like IAX. A picture being worth a thousand words, here's the layout I need to use: http://img62.imageshack.us/img62/4077/sipandnatrouters.jpg The PBX server is located in the private LAN behind a NAT router connected to the Internet (I know it'd be easier if it were located in the public network, but this router doesn't support DMZ's so the server has to be in the private network) A couple of (soft|hard)phones are located on the same LAN and connected to the PBX server, along with a PSTN gateway (Linksys 3102 or a Digium PCI card) Remote users using (soft|hard)phones are located somewhere on the Net with dynamic IP's and are also located behind NAT routers I may or may not have control over the local NAT router where the PBX server is located, but I have no control over the remote NAT routers, either because the users don't have the computer knowledge to map ports or because the routers are off-limit (eg. web cafés, hotel LAN's, etc.) Is it possible to configure the PBX server, the (soft|hard)phones, and the PSTN gateway so that the all conversations work fine, no matter the endpoints (POTS caller/local phone, POTS caller/remote phone, local phones, remote phone/local phone)? In which cases may I expect problems, and are there solutions? FWIW, I'm leaning toward using Freeswitch, but I could end up using Asterisk if there are technical advantages to it in this context. Thank you for any info.

    Read the article

  • Unable to PPTP through NAT on Cisco 881

    - by MasterRoot24
    I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

    Read the article

  • Why isn't ICMP routing with iptables nat routing

    - by Scott Forsyth - MVP
    I'm using iptables on Ubuntu server to route a public IP to a private IP. I want to nat all traffic, including 80, 443 and ICMP. However, it appears that ICMP isn't routing. I have a steady ping going to the public IP and it never stops, even with NAT pointing to a bogus IP. Here are the rules that I'm using: iptables -t nat -I PREROUTING -d 206.72.119.76 -j DNAT --to-destination 10.240.5.5 iptables -t nat -I POSTROUTING -s 10.240.5.5 -j SNAT --to-source 206.72.119.76 I tried with rules for ICMP specifically, but no such luck: iptables -t nat -I PREROUTING -d 206.72.119.76 - icmp --icmp-type echo-request -j DNAT --to-destination 10.240.5.5 Any ideas?

    Read the article

  • IPTables: NAT multiple IPs to one public IP

    - by Kaemmelot
    I'm looking for a way how to nat 2 or more inner IPs (in my case xen doms) to one outer IP. I tried to use iptables -t nat -A PREROUTING -d 123.123.123.123 -j DNAT --to 1.2.3.4 --to 1.2.3.7 iptables -t nat -A POSTROUTING -s 1.2.3.4 -j SNAT --to 123.123.123.123 iptables -t nat -A POSTROUTING -s 1.2.3.7 -j SNAT --to 123.123.123.123 And got an error: iptables v1.4.14: DNAT: Multiple --to-destination not supported Try `iptables -h' or 'iptables --help' for more information. I found this in the manpage: Later Kernels (= 2.6.11-rc1) don't have the ability to NAT to multiple ranges anymore. So my question is: Why is it not possible anymore and is there a workaround? Maybe I should use an other method I don't know yet? EDIT: The idea is to use the system like a router, so I have one address but multiple users behind. The problem is I don't know which connection reffers to a user (for example 1.2.3.4). But I know, they all have different ports open for incomming traffic. So my solution (for DNAT) would be to nat all incoming connections to all users and filter all unused ports, so the connection goes to one single user. For outgoing traffic I would use iptables -A FORWARD -i eth0 -d 1.2.3.4 -m state --state ESTABLISHED,RELATED -j ACCEPT

    Read the article

  • (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

    - by mschr
    My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

    Read the article

  • Destination NAT Onto the Same Network from internal clients

    - by mivi
    I have a DSL router which acts as NAT (SNAT & DNAT). I have setup a server on internal network (10.0.0.2 at port 43201). DSL router was configured to "port forward" (or DNAT) all incoming connections to 10.0.0.2:43201. I created a virtual server for port forwarding on DSL router. I also added following iptables rules for port forwarding. iptables -t nat -A PREROUTING -p tcp -i ppp_0_1_32_1 --dport 43201 -j DNAT --to-destination 10.0.0.2:43201 iptables -I FORWARD 1 -p tcp -m state --state NEW,ESTABLISHED,RELATED -d 10.0.0.2 --dport 43201 -j ACCEPT # ppp_0_1_32_1 is routers external interface. # routers internal IP address is 10.0.0.1 and server is setup at 10.0.0.2:43201 Problem is that connections coming from external IP addresses are able to access internal server using External IP address, but internal clients (under NAT) are not able to access server using external IP address. Example: http://<external_address>:43201 is working from external clients But, internal clients are not able to access using http://<external_address>:43201 This seems to be similar to the problem described in http://www.netfilter.org/documentation/HOWTO/NAT-HOWTO-10.html (NAT HOW-TO Destination NAT Onto the Same Network). Firstly, I am not able to understand why is this a problem for internal clients? Secondly, what iptables rule will enable internal clients to access server using external IP address? Please suggest.

    Read the article

  • NAT and P2P router crash

    - by returnFromException
    So..i had this argument with my networks teacher. He said that some people complains about router crashes due to many entrys on NAT tables on a router. I didnt understand and i asked: "If the application uses the same port, why does the router crash?. It should have only one entry (pc-ip,pcport;public-ip,public-port)". And he said: "it doesnt matter its using the same port". I got the idea that NAT creates an entry for every packet that passes trought it. Iam assuming NAT with overloading as you might have guessed. So the questions are: 1-How does nat entrys are created? On a packet basis or connection basis? I mean: suppose i send a udp packet..does the router create an entry? 2-When i start a TCP connection, does the router create a persistant nat entry until the connection closes? 3-Was my teacher right? The NAT table can overload assuming an aplication on the same port sending packets? Thanks in advance.

    Read the article

  • Problem with setup VPN in Ubuntu Server 12.04

    - by Yozone W.
    I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

    Read the article

  • Problem with setup VPN on Ubuntu Server 12.04

    - by Yozone W.
    I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

    Read the article

  • RRAS VPN Server on Windows 2008 Behind NAT

    - by Chris
    Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

    Read the article

  • Reloading NAT configuration on a running VMWare Server 2.0.2

    - by Jonathan Clarke
    I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

    Read the article

  • Mikrotik and NAT/Routing issue

    - by arul
    I have basic NAT/Routing problem with Mikrotik RB750 that I've been unable to solve over the past days. From our ISP we have 26 IP addresses: 10.10.10.192/27, with 10.10.10.193 being the gateway and 10.10.10.194 the first available IP. What I need is that everything connected to ether2 gets a public IP from the DHCP server, and everything connected to ether3 gets a local IP from another DHCP (192.168.100.0/24). All clients should have internet access (I'll figure out bandwidth throttling later) and optimally just 'see' each other (all boxes are Win7, I guess this can ultimately be handled with VPN). Here is my setup: ether1 (10.10.10.194) is connected directly to ISP. 20 clients connected to ether2(10.10.10.195), and another 20 to ether3(10.10.10.196) (both through same 24 port switches). This is my setup, which doesn't work, all 20 clients from ether2 can access the internet, though all comm. seems to come from 10.10.10.194 (is this due to the masquerade on ether1?), and ether3 can't access the internet at all. I think that I need to masquerade ether3, and SNAT/DNAT or NETMAP ether2, but that doesn't work either, I guess that I need to somehow 'wire' both ether2+3 to ether1. Address list: # ADDRESS NETWORK INTERFACE 0 ;;; public 10.10.10.194/32 10.10.10.192 ether1-gateway 1 ;;; inner DHCP 192.168.100.0/24 192.168.100.0 ether3-private 2 ;;; public 10.10.10.195/32 10.10.10.192 ether2-pub 3 ;;; public 10.10.10.196/32 10.10.10.192 ether3-private NAT 0 ;;; ether3 nat chain=srcnat action=src-nat to-addresses=10.10.10.196 src-address=192.168.100.0/24 out-interface=ether3-private 1 ;;; ether3 nat chain=dstnat action=dst-nat to-addresses=192.168.100.0/24 in-interface=ether3-private 2 ;;; ether1 masquerade chain=srcnat action=masquerade to-addresses=10.10.10.194 out-interface=ether1-gateway Routes: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 ether1-gateway 1 2 A S 10.10.10.192/27 10.10.10.195 ether2-pub 1 3 ADC 10.10.10.192/32 10.10.10.195 ether2-pub 0 ether1-gateway ether3-private 4 ADC 192.168.100.0/24 192.168.100.0 ether3-private 0 IP Pools: # NAME RANGES 0 public-pool 10.10.10.201-10.10.10.220 1 private-pool 192.168.100.2-192.168.100.254 DHCP configs: # NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP 0 public-dhcp ether2-pub public-pool 3d 1 private-dhcp ether3-private private-pool 3d Thanks!

    Read the article

  • Default Gateway solution on NAT'd network (best options)

    - by kwiksand
    I've recently changed a network from a bunch of machines exposed to the net on a network to a more security conscious Firewall-fronted network with a DMZ for public services. Everything's mostly working perfectly now, but I've got the old problem of NAT Loopback where a machine within the LAN wants to access a public service via the public/external IP. I've solved this problem previously in a small/SOHO environment simply using NAT loopback features of the router in use or a simple iptables rule to do the same, but I want to make sure I make the most resilient choice with the least concern. It seems I can: Use iptables as I've said to DNAT and MASQUERADE the change source/destination so the connection works correctly i.e iptables -A PREROUTING -t nat -d ip.of.eth0.here -p tcp --dport 8080 -j DNAT --to 192.168.0.201:8080 iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -p tcp --dport 8080 -d 192.168.0.201 -j MASQUERADE Use split DNS, with internal mappings for public IP's Potentially do some route nastyness by setting the Default Gateway to use a different externally exposed IP to then come back in the public route (messy) Someone mentioned putting the Default Gateway within the DMZ as well (on serverfault), but I can't find the post again. I'm sure this is a common issue for many with NAT'd networks, but I've not really seen the perfect solve all when it comes to fixing this problem. What is your opinion?

    Read the article

  • Amazon VPC NAT not working

    - by rpkelly
    I'm trying to create a NAT instance for my VPC to allow instances on private subnets connect to the internet (most importantly, S3). I tried following the instructions here: http://docs.amazonwebservices.com/AmazonVPC/2011-07-15/UserGuide/index.html?VPC_NAT_Instance.html . Unfortunately, the instances in the private subnet (call it 10.10.2.0/24) cannot reach the internet. I have done the following: Create a NAT instance (Amazon's ami-vpc-nat-1.0.0-beta.i386-ebs (ami-d8699bb1)) in public subnet (call it 10.10.1.0/24). Changed "Source / Dest Check" to disabled. Created a new entry in the default routing table (which is used by 10.10.2.0/24) and had it point to the ID of the newly created instance. Associated an Elastic IP address with the NAT instance. Allowed all outbound traffic on the security group of the NAT instance. Ensured that all traffic could pass between the two subnets. I've tried also doing this with an existing instance using iptables, but had no luck. And I have verified that sys.net.ipv4.ip_forward is 1, just in case anyone was wondering. And I still have no internet connectivity from the instances on 10.10.2.0/24. Does anyone have any suggestions?

    Read the article

  • How can private IPV4 addresses get past iptables NAT (tcp RST,FIN)

    - by gscott
    I've got a router performing simple NAT translation using iptables iptables -t nat -o -j MASQUERADE This works fine almost all of the time except for one particular case where some TCP RST and FIN packets are leaving the router un-NAT'd. In this scenario I setup 1 or 2 client computers streaming Flash video (eg www.nasa.gov/ntv) At the router I then tear down and re-establish the public interface (which is a modem) As expected the Flash streams stall out. After the connection is re-established and I try to refresh the Flash pages, I see some TCP RST and [FIN,ACK] packets leaving the public interface (I assume as Flash attempts to recover its stream). I don't know how these packets can leave the router non-NAT'd

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >