Search Results

Search found 8 results on 1 pages for 'onur'.

Page 1/1 | 1 

  • Device being used by VxVM

    - by Onur Bingul
    If you are using vxvm, you may have issues when you try to unconfigure a disk root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0cfgadm: Component system is busy, try again: failed to offline:     Resource             Information       ----------------       -------------------------/dev/dsk/c1t3d0   Device being used by VxVM“cfgadm unconfigure” command fails here.The way to resolve this is to disable the disks path from DMP control. Since there is only one path to this disk, the “-f” (for force) option needs to be used:root@techsupport2 # vxdmpadm -f disable path=c1t3d0s2root@techsupport2 # vxdmpadm getsubpaths NAME         STATE[A]   PATH-TYPE[M] DMPNODENAME  ENCLR-NAME   CTLR   ATTRS================================================================================c1t6d0       ENABLED(A)   -          disk_0       disk         c1       -c1t3d0       DISABLED(M)   -          disk_1       disk         c1       -c1t0d0s2     ENABLED(A)   -          disk_2       disk         c1       -c1t1d0       ENABLED(A)   -          disk_3       disk         c1       -c3t47d0      ENABLED(A)   -          sun35100_0   sun35100     c3       -c3t47d1      ENABLED(A)   -          sun35100_1   sun35100     c3       -c3t47d2s2    ENABLED(A)   -          sun35100_2   sun35100     c3       -c3t47d3s2    ENABLED(A)   -          sun35100_3   sun35100     c3       -You can see the path now disabled from DMP.root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0Now you can unconfigure the disk

    Read the article

  • Cluster Node Recovery Using Second Node in Solaris Cluster

    - by Onur Bingul
    Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition  Tag  Flags    Sector     Count    Sector  Mount Directory      0      2    00          0   2106432   2106431      1      3    01    2106432  74630784  76737215      2      5    00          0 143349312 143349311      4      7    00   76737216  50340672 127077887      5      4    00  127077888  14683968 141761855      6      0    00  141761856   1058304 142820159      7      0    00  142820160    529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices:   1.  fsck -o f /dev/rdsk/c1t2d0s0 (root)   2.  fsck -o f /dev/rdsk/c1t2d0s4 (/var)   3.  fsck -o f /dev/rdsk/c1t2d0s5 (/usr)   4.  fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201        -       -       swap    -       no      -/dev/md/dsk/d200        /dev/md/rdsk/d200       /       ufs     1       no      -/dev/md/dsk/d205        /dev/md/rdsk/d205       /usr    ufs     1       no      logging/dev/md/dsk/d204        /dev/md/rdsk/d204       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d206        /dev/md/rdsk/d206       /global/.devices/node@2 ufs     2       noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs     2       no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs      2       no  globalnew:/dev/md/dsk/d101        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/md/dsk/d105        /dev/md/rdsk/d105       /usr    ufs     1       no      logging/dev/md/dsk/d104        /dev/md/rdsk/d104       /var    ufs     1       no      logging#/dev/md/dsk/106       /dev/md/rdsk/d106       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d106        /dev/md/rdsk/d106       /global/.devices/node@1 ufs     2       noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

    Read the article

  • ORA-28001 the password has expired error in Solaris Cluster

    - by Onur Bingul
    Solaris Cluster start or stop Oracle database using credentials of a specified user in Oracle Database. If you have issues with starting of Oracle Database resource and see ORA-28001 error message in /var/adm/messages it means that database user's who is used by Solaris Cluster to start Oracle database, password has expired. To resolve the issue reset the password of the Oracle database user SQL> alter user user_name identified by password  and change connection string in Solaris Cluster using following command -bash-3.2 # /usr/cluster/bin/clresource set -p Connect_string="user/password" oracle_resource

    Read the article

  • Specialization of template after instantiation?

    - by Onur Cobanoglu
    Hi, My full code is too long, but here is a snippet that will reflect the essence of my problem: class BPCFGParser { public: ... ... class Edge { ... ... }; class ActiveEquivClass { ... ... }; class PassiveEquivClass { ... ... }; struct EqActiveEquivClass { ... ... }; struct EqPassiveEquivClass { ... ... }; unordered_map<ActiveEquivClass, Edge *, hash<ActiveEquivClass>, EqActiveEquivClass> discovered_active_edges; unordered_map<PassiveEquivClass, Edge *, hash<PassiveEquivClass>, EqPassiveEquivClass> discovered_passive_edges; }; namespace std { template <> class hash<BPCFGParser::ActiveEquivClass> { public: size_t operator()(const BPCFGParser::ActiveEquivClass & aec) const { } }; template <> class hash<BPCFGParser::PassiveEquivClass> { public: size_t operator()(const BPCFGParser::PassiveEquivClass & pec) const { } }; } When I compile this code, I get the following errors: In file included from BPCFGParser.cpp:3, from experiments.cpp:2: BPCFGParser.h:408: error: specialization of ‘std::hash<BPCFGParser::ActiveEquivClass>’ after instantiation BPCFGParser.h:408: error: redefinition of ‘class std::hash<BPCFGParser::ActiveEquivClass>’ /usr/include/c++/4.3/tr1_impl/functional_hash.h:44: error: previous definition of ‘class std::hash<BPCFGParser::ActiveEquivClass>’ BPCFGParser.h:445: error: specialization of ‘std::hash<BPCFGParser::PassiveEquivClass>’ after instantiation BPCFGParser.h:445: error: redefinition of ‘class std::hash<BPCFGParser::PassiveEquivClass>’ /usr/include/c++/4.3/tr1_impl/functional_hash.h:44: error: previous definition of ‘class std::hash<BPCFGParser::PassiveEquivClass>’ Now I have to specialize std::hash for these classes (because standard std::hash definition does not include user defined types). When I move these template specializations before the definition of class BPCFGParser, I get a variety of errors for a variety of different things tried, and somewhere (http://www.parashift.com/c++-faq-lite/misc-technical-issues.html) I read that: Whenever you use a class as a template parameter, the declaration of that class must be complete and not simply forward declared. So I'm stuck. I cannot specialize the templates after BPCFGParser definition, I cannot specialize them before BPCFGParser definition, how may I get this working? Thanks in advance, Onur

    Read the article

  • Using Simple XML and getting NoClassDefFoundError in Android

    - by Berat Onur Ersen
    I'm trying to use Simple XML to convert my java objects to XML format in my Android application. I'm getting NoClassDefFoundError at line Serializer serializer = new Persister(); java.lang.NoClassDefFoundError: org.simpleframework.xml.core.Persister I have simple-xml-2.6.1.jar in project class path and when I got NoClassDefFoundError I also put these 3 jars in classpath stax-1.2.0.jar stax-api-1.0.1.jar xpp3-1.1.3_8.jar but made no use. Still having NoClassDefFoundError. Any kind of help will be appreciated.Thank you.

    Read the article

  • floating div problem in IE7

    - by Onur
    I'm trying to use a second background image with a floated div but it doesn't work in IE6 & 7 I'm aware that the floating div's is a pain in * in IE7 and lower versions but I really need to make it work. here is the code I'm using <body style="background-color:#FFFFFF; margin-top:0px; margin-right:0px;" topmargin="0" rightmargin="0" leftmargin="0"> <div id="bg2" style="float:right; top:0px; width:450px; height:151px; margin-right:0px; padding-right:0px; font-size:1px; overflow:visible; background-image:url(images/back2.jpg);"></div> <center> <div style="position:relative; top:0px; width:1050px; margin:0px; padding:0px; vertical-align:top; text-align:left;"> ....(huge div container)... I also tried to remove width attribute from the div which contains 2nd background image, then get the windows size and add the difference to the container div as left attribute with Jquery. It worked fine in all IE versions but this time not on Chrome here is a print screen any ideas please?

    Read the article

1