Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 182/235 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Double entries in the gnome 3 task bar

  - by Mark

  I am running Ubuntu 12.04 with Gnome 3. All was working well except that graphics were slow and even moving a window on the screen seemed slow. I installed the fglrx ati driver. Which seems to have improved matters. But on first login I had all gnome items duplicated. That is my task bar has the ubuntu sign, then says Applications, then places then the ubuntu sign then Aplications and then places. Any application I run produces two icons at the bottom of the screen. This was after a reboot. I rebooted again. Now I have 3!! On the right each set of icons such as printer is also trippled!! See screenshot at http://jetmark.co.uk/Screenshot.png See Dmesg at http://jetmark.co.uk/dmesg.txt Any suggestions welcome. Reboot - now I have 4!! So one set gets added on each reboot. Help!! I am going to be task barred out before long!!

  Read the article

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

• How do I troubleshoot system slowness seen when viewing PDFs or videos?

  - by asp

  Whenever I watch videos, either online of local via Totem and/or open PDF files using evince. The system gets really, really bogged down. All apps get really slow, menus take forever to display, switching windows gives me time to make a coffee, etc. I have a couple of bug reports open on this, but what do I need to do to really troubleshoot the issue? I've purged Adobe Flash from the system, but YouTube HTML5 videos still have the issue. A bunch of PDFs saved locally trigger the problem. And to (temporarily) remove the slowness, I need to shutdown the computer, breath for a few minutes, then restart. A simple reboot does not do the trick. How can I identify the cause? This only started on 13.04. I've had Ubuntu on this machine for a year without a problem until "upgrading" to 13.04. I am not a programmer, but I suspect an issue with the Intel video driver. Is there something I can run which will diagnose this, or are there concrete steps I can follow to find the culprit?

  Read the article

• LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

  - by Richek

  Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

  Read the article

• How can I extend the desktop onto an external monitor/projector?

  - by hellocatfood

  I've plugged in a projector into my laptop and I'm attempting to extend the desktop onto it (so that I can run a full screen app on the projector and have the controls on my laptop). I'm able to mirror the screens effectively (it does this by default) but I can't extend it. When I untick "Mirror screens" and press apply it asks me to log out and then back in again but it goes back to mirroring the screens. I'm able to extend desktop on to my external monitor at home, just not this projector. Is there a manual way or other way to do this other that through Monitors setting? My computer model is Dell Studio 1555: Pentium Dual Core T4300(2.1GHz,800MHz,1MB), 4096MB 800MHz DDR2 Dual Channel, 512 MB ATI Mobility RADEON HD 4570 using the ATI proprietary driver. My screen resolution is 1366x768 (16:9) The projector that it wont connect properly is a Hitachi CPX3. That page specifies that it's especially designed for projectors that use 16:10 aspect ratio, but considering my external monitor at home uses 4:3 should the differences in aspect ratio matter or be causing this error?

  Read the article

• ubuntu 12.10 Lenovo b570e, WiFi connected but not working

  - by koogee

  I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

  Read the article

• 13.10 Saucy login issues; black screen, loop, and freeze

  - by user135598

  Once upgraded to I 13.10 I was not able to get past the login screen. I had the black screen. Also; I can not log on with low graphics mode from recovery either. It makes no difference if I try default graphics driver or not. Then after running sudo install -f from recovery root prompt I got a login loop. I have purged fglrx, fglrx-legacy, and nvidia-current. I updated my repository with xorg-edgers and reinstalled nvidia-current. Now it semi-freezes at the login screen when I try to log on as my normal user. I say 'semi' because I can still use my mouse to click on the upper right hand Ubuntu logo and Shut Down or Restart the PC. I still cannot log on with my user name, but I can through the Guest login. While logged in as Guest I added a new user account with administrative privileges. I CAN log into this account without problem and from here am able to see that my .dmrc file in my original account reads: [Desktop] Session=XBMC I have changed 'Session=XBMC' to 'Session=ubuntu' and rebooted, but to no avail. The file resets itself and makes a backup of my changes. Any help would be greatly appreciated.

  Read the article

• Opportunities in Cloud Computing

  - by Paul Sorensen

  A recent article from CIO Journal indicates that there is an extreme labor shortage (in certain technology areas) that is is leading to upward pressure on wages for IT Workers. This represents a great opportunity for those with certain skill-sets, among which include Java (Oracle certification is mentioned specifically). The article points out that a key driver of the labor shortage is the expansion of cloud computing. Cloud computing is set up to make life extremely simple for end-users, but the model pushes the complexity to back-end systems which are sophisticated, enterprise-level computing stacks (Oracle has an extensive set of cloud computing solutions). These complex systems require very highly-skilled IT professionals (the best-of-the-best) to successfully develop, implement, administer and maintain them. What this mean for you is that there is opportunity for those who have the appropriate skills at the appropriate levels. If you want to be a part of this opportunity you should do a self-assessment of your own skill-sets and experience. Based upon your results you can decide where it would be most appropriate to spend your time and resources for the highest return on your investment. By expanding and sharpening your skills and by gaining greater experience you will be better prepared to take advantage of career opportunities (like this) that come along periodically. As you evaluate your needs remember that Oracle University has a tremendous selection of high-quality eduction offerings (including training and certification) that can you help move your career forward. Thanks and best of luck!

  Read the article

• Robust way to keep records of software releases?

  - by japreiss

  We release a number of small plug-ins that go along with our software. Each plug-in allows our software to talk to a single manufactuer's hardware. I would like to devise a system for keeping track of plug-in releases. Example info that should be stored: Hardware manufacturer name 32-bit? 64-bit? both? What modes of operation does the hardware support? What versions of the manufacturer's driver have been tested with the plugin? Desirable properties of the system: Able to synchronize with version control software Stores data in human-readable text file (also good for differ tool) Free visual, spreadsheet-like editor available Able to do simple analysis like "What is the oldest plug-in?" I've got to imagine that someone else has tackled this problem already. Right now my best guess is XML/JSON with a visual editor, but I have been disappointed in the editors I've tried so far. I'd like to get input from some more experienced developers. Thanks!

  Read the article

• Wifi doesn't connect if I'm upstairs

  - by user11233

  Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

  Read the article

• Printing Off Center or Images Offset After Upgrade to 14.04 LTS (Brother HL-2240)

  - by fortitude

  :) I have a very frustrating problem with my Brother HL-2240 under Ubuntu 14.04. Bear in mind this was working perfectly under Ubuntu 13.10. In Firefox, when I print a webpage, all of the images are off center and cut off, this is a big deal for my work. In Google Chrome, when I print a webpage, the page is off center, toward the right margin. In Opera, when I print a webpage, all of the white areas within the margins are black, using a lot of toner. PDF opened in document viewer, prints off center. Steps I have taken to troubleshoot: 1) Playing with the printer settings, resetting to defaults, etc. 2) Un-installing the Brother driver and re-installing (linux-brprinter-installer-2.0.0-1 from the Brother website), which works perfectly in Ubuntu 13.10. I see a similar, un-answered question, here. Hopefully this question provides some additional clarity to the matter. If anyone would like some additional detail because she or he is willing to help, please let me know. I can scan output from the printer to show you. Thank you.

  Read the article

• Can't get Unity 3D to work in 11.10

  - by pmoseph

  I recently upgraded to 11.10 on my Lenovo ThinkPad T520, and I'm not able to load Unity 3D (I'm not selecting 2D at login menu either). me@mycomp:~$ echo $DESKTOP_SESSION ubuntu-2d I ran the unity support test below as well. me@mycomp:~$ /usr/lib/nux/unity_support_test -p Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: unable to create the OpenGL context And it looks like I only have one graphics card: me@mycomp:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Also, Ubuntu lists nothing under the "Additional Drivers" window. Any help would be extremely appreciated as I'm somewhat of a noob. Thanks! Edit 1: Here is the output of lshw -C display me@mycomp:~$ sudo lshw -C display *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64)

  Read the article

• Updated 12.04 and now Xorg is dead from NVidia drivers

  - by Xatolos

  I updated (August 16) Ubuntu 12.04 today and while I admit I didn't look what was being updated, it was large enough to have had an NVidia update in it. Problem is later on when I turned on my laptop again it won't boot into a GUI, just to the terminal (which I don't really know much of how to do anything). Now I have been able to log in and type "startx" to start up the GUI and now its complaining that my NVidia driver (if I remember correctly) is listed as being version 304.(number) and the version installed/found is version 295.(number). I don't know how this happened and now I'm stuck. I have no idea how it happened and don't know how to fix. Does anyone have any ideas? I have only access to wifi internet and no idea how to log on without the GUI so getting a new NVidia package isn't something I would know how to do even... Any and all help would be highly appreciated. edit: If it helps, I'm using a ASUS G Series G53JW-A1 http://www.newegg.com/Product/Product.aspx?Item=N82E16834220861

  Read the article

• External TV only allows 640x480 using VGA cable

  - by EdC

  I have Ubuntu precise installed on a MacBook Pro. When connecting to an external television using a VGA style cable the highest resolution available seems to be 640x480. I'm using the proprietary NVIDEA Accelerated Graphics Driver (version current) and attempting to setup the TV using the nvidea-settings tool. I know all the equipment supports higher resolutions because of the following: Prior to rebuilding my machine with precise, the same TV, cabel & adapter gave higher resolutions The same machine & TV when used with a HDMI cable allows higher resolutions Windows laptops with the same cable & TV are able to achieve higher resolutions I'm not sure what to look for next, there are some similar FAQ questions but I'm not sufficiently familiar with the areas involved to know if these are my issue or are safe to try. Specifically: colord problem & my monitor resolution 640*480 with no other options! - is the closest, but as I'm having no problems with the main laptop monitor I'm not sure the described symptoms apply. I can't work out from the answer or Bumblebee site how to determine if nvidia optimus applies to my laptop. Why isn't my monitor's native resolution appearing as an option? - suggests configuring X by hand, but doesn't entirely match the symptoms I'm seeing

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• issues with ASUS S301L ultrabooks

  - by Wuerze

  I just like to tell you what still is a Problem in Ubuntu 14.04 and should be solved for a nice experience of this distribution. Unfortunately I do not have any hints to tell you, because I am just a user and know not much about programming. Anyway, I hope it helps. 1) Intel open source Graphics issues (proprietary) -when attaching HDMI-cable the screen switches to the external monitor and it's fine, but there is no switching back unless restart with HDMI deattached -black screen appears for like 2 seconds as if I would change screen in the settings; frequency increases with intensity of driver use (i.e. videos or video games) 2) hotkeys (commonly recognised) -there is no possibility to adjust brightness with the hotkeys (Fn+F5 and Fn+F6) 3) touchscreen (commonly recognised) -the touchscreen is behaving like a mouse -configuring gestures for the multi touch screen seems to always end in disabling touch pad gestures 4) panel symbols -battery symbol has got a low accuracy while it determines accurately the energy left; only 5 steps of energy are shown by the symbol Thank you all for participating in the solution of these problems! I will stay tuned and edit this list if something has been solved.

  Read the article

• Intermittent sound on an Medion Akoya S5610

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• Getting error message when trying to start a virtual machine

  - by Sunil J

  I have been using VMWare on Windows for a long time. But after a long wait, I moved to VirtualBox on Ubuntu 11.10. I installed Ubuntu, 32 Bit, installed all available updates and installed Virtual Box. When I try to create a new Windows installation inside VirtualBox, I got the following error messages. 1st error dialogue VirtualBox - Error Failed to open a session for the virtual machine Windows XP.<br> The virtual machine '**Windows XP**' has terminated unexpectedly during startup with exit code 1.<p> Details<p> Result Code: <br> NS_ERROR_FAILURE (0x80004005)<br> Component: <br> Machine<br> Interface: <br> IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}<p> 2nd error dialogue **Virtualbox - Error in suplibOsinit**<br> **Kernal driver not installed (rc--1908)**<br> Please install the virtualbox-dkmbs package and execute 'modprobe vboxdrv' as root.<p> Steps I tried I have already tried reinstalling VirtualBox. Google result seem to indicate the the problem happens due to Kernel updates. Is there anyway I can get this working? I need this for malware analysis and if VirtualBox is going to crash on me all the time, then I won't be able to use Ubuntu for work. Output to dpkg -l | grep virtual server rc virtualbox 4.1.2-dfsg-1ubuntu1 x86 virtualization solution - base binaries rc virtualbox-qt 4.1.2-dfsg-1ubuntu1 x86 virtualization solution - Qt based user interface cute 'modprobe vboxdrv' as root.<p>

  Read the article

• UBUNTU's Network Connection Manger can't detect Huawei ETS2051 Modem device!

  - by Doctoa

  I have a modem device called Huawei ETS2051 and the Network Connection Manger can't detect it, but when I use Gnome-PPP it work fine but the problem is when I use Gnome-PPP; apps like Ubuntu software Center Can't reconice that's Iam connecting to the Internet so the app is just act like it's offline while other apps like web browsers and IM's work good under Gnome-PPP. any way what I want is to have a Full Ubuntu experince by making The Network Connection Manger detect my ETS2051. I have another 3G USB modem and The Network Connection Manger detect it and it's work just fine but the internet price for this one is high and I can't effort it so am count on that ETS2051 modem as you can see for it's low price and stable internet speed that satesfy my needs. More information: Gnome-PPP is a GUI for wvdial. the ETS2051 modem use a serial USB port. I have a Windows driver CD for the device. I have also find This qustion about the software Center acting like it's offline around wvdial and there's this launchpad bug. and am really insest to use Ubuntu Software Center so please no other software manger apps recomendation... I've also this Genius ColorPage HR6X Slim scanner that's Ubuntu can't detect it, so if you interset you can check and answer the qustion from here...

  Read the article

• Quick Fix for GlassFish/MySQL NoPasswordCredential Found

  - by MarkH

  Just the other day, I stood up a GlassFish 3.1.2 server in preparation for a new web app we've developed. Since we're using MySQL as the back-end database, I configured it for MySQL (driver) and created the requisite JDBC resource and supporting connection pool. Pinging the finished pool returned a success, and all was well. Until we fired up the app, that is -- in this case, after a weekend. Funny how things seem to break when you leave them alone for a couple of days. :-) Strangely, the error indicated "No PasswordCredential found". Time to re-check that pool. All the usual properties and values were there (URL, driverClass, serverName, databaseName, portNumber, user, password) and were populated correctly. Yes, the password field, too. And it had pinged successfully. So why the problem? A bit of searching online produced enough relevant material to offer promise. I didn't take notes as I was investigating the cause (note to self), but here were the general steps I took to resolve the issue: First, per some guidance I had found, I tried resetting the password value to nothing (using () for a value). Of course, this didn't fix anything; the database account requires a password. And when I tried to put the value back, GlassFish politely refused. Hmm. I'd seen that some folks created a new pool to replace the "broken" one, and while that did work for them, it seemed to simply side-step the issue. So I deleted the password property - which GlassFish allowed me to do - and restarted the domain. Once I was back in, I re-added the password property and its value, saved it, and pinged...success! But now to the app for the litmus test. The web app worked, and everything and everyone was now happy. Not bad for a Monday.  :-D Hope this helps, Mark

  Read the article

• Intermittent sound

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• How can I connect my USB (HP) printer in 10.4, which can't be discovered and worked in 9.x

  - by Brian

  My printer was working under 9.x. It is a an hp photosmart C3100 series. When I open the Admin- printing. no local printers are found. I try to add via other (My local choices are Serial and other). I have tried many uri's - ipp://localhost:631/ipp, http://localhost/ipp, localhost, 127.0.0.1, etc... None have worked. Under the networked I have tried JetDirect, using localhost and 127.0.0.1 and port 631. I have tried many options under IPP with different variants in the host trying to verify a printer. No luck. I tried LPD/LPR with localhost and tried the probe. no luck. I tried the cups admin via localhost:631 and that didn't work. On the old version its simply found the local printer, I might have picked the driver, I can't remember but it was the photosmart c3100 series that was working. I just can't get 10.4 to print.

  Read the article

• Uninstall ax88179 package

  - by jackbenny

  I've installed the ax88179 package from the PPA (since the ax88179 driver isn't in the 3.8 kernel). But now I'd like to install kernel 3.11.6 and this module is already included here. So I'd like to uninstall the the module from the package but this fails with the following error message The following packages will be REMOVED: ax88179* 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 313 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 202833 files and directories currently installed.) Removing ax88179 ... Error! There are no instances of module: ax88179_178a 1.6.0 located in the DKMS tree. rm: cannot remove ‘/usr/src/AX88179_178A_LINUX_DRIVER_v1.6.0_SOURCE’: No such file or directory dpkg: error processing ax88179 (--purge): subprocess installed pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already ln: failed to create symbolic link ‘/usr/src/AX88179_178A_LINUX_DRIVER_v1.7.0_SOURCE’: File exists Error! DKMS tree already contains: ax88179_178a-1.7.0 You cannot add the same module/version combo more than once. Module ax88179_178a/1.7.0 already built for kernel 3.8.0-32-generic/4 Module ax88179_178a/1.7.0 already installed on kernel 3.8.0-32-generic/x86_64 Errors were encountered while processing: ax88179 E: Sub-process /usr/bin/dpkg returned an error code (1) It complains about both version 1.6 and 1.7. I've updated to 1.7 a couple of days ago. --force doesn't help either. I just want to get rid of it since when I'm running 3.11.6 the versions interfere with each other.

  Read the article

• Unable to enable wireless in ubuntu 12.04

  - by Joe

  I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes

  Read the article

• Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

  - by Coen

  After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >