Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 224/527 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

• Gödel, Escher, Bach - Gödel's string

  - by Brad Urani

  In the book Gödel, Escher, Bach: An Eternal Golden Braid by Douglas Hofstadter, the author gives us a representation of the precursor to Gödel's string (Gödel's string's uncle) as: ~Ea,a': (I don't have the book in front of me but I think that's right). All that remains to get Gödel's string is to plug the Gödel number for this string into the free variable a''. What I don't understand is how to get the Gödel number for the functions PROOF-PAIR and ARITHMOQUINE. I understand how to write these functions in a programming language like FlooP (from the book) and could even write them myself in C# or Java, but the scheme that Hofstadter defines for Gödel numbering only applies to TNT (which is just his own syntax for natural number theory) and I don't see any way to write a procedure in TNT since it doesn't have any loops, variable assignments etc. Am I missing the point? Perhaps Gödel's string is not something that can actually be printed, but rather a theoretical string that need not actually be defined? I thought it would be neat to write a computer program that actually prints Gödel's string, or Gödel's string encoded by Gödel numbering (yes, I realize it would have a gazillion digits) but it seems like doing so requires some kind of procedural language and a Gödel numbering system for that procedural language that isn't included in the book. Of course once you had that, you could write a program that plugs random numbers into variable "a" and run procedure PROOF-PAIR on it to test for theoromhood of Gödel's string. If you let it run for a trillion years you might find a derivation that proves Gödel's string.

  Read the article

• Obstacle Avoidance steering behavior: how can an entity avoid an obstacle while other forces are acting on the entity?

  - by Prog

  I'm trying to implement the Obstacle Avoidance steering behavior in my 2D game. Currently my approach is to apply a force on the entity, in the direction of the normal of the heading, scaled by a number that gets bigger the closer we are to the obstacle. This is supposed to push the entity to the side and avoid the obstacle that blocks it's way. However, in the same time that my entity tries to avoid an obstacle, it Seeks to a point more or less behind the obstacle (which is the reason it needs to avoid the obstacle in the first place). The Seek algorithm constantly applies a force on the entity that pushes it (more or less) in the direction of the obstacle, while the Obstacle Avoidance algorithm constantly applies a force that pushes the entity away (more accurately, to the side) of the obstacle. The result is that sometimes the entity succesfully avoids the obstacle, and sometimes it collides with it, depending on the strength of the avoidance force I'm applying. How can I make sure that a force will succeed in steering the entity in some direction, while other forces are currently acting on the entity? (And while still looking natural). I can't allow entities to collide with obstacles when realistically they should be able to easily avoid them, doesn't matter what they're currently doing. Also, the Obstacle Avoidance algorithm is made exactly for the case where another force is acting on the entity. Otherwise it wouldn't be moving and there would be no need to avoid anything. So maybe I'm missing something. Thanks

  Read the article

• From TFS to Git

  - by Saeed Neamati

  I'm a .NET developer and I've used TFS (team foundation server) as my source control software many times. Good features of TFS are: Good integration with Visual Studio (so I do almost everything visually; no console commands) Easy check-out, check-in process Easy merging and conflict resolution Easy automated builds Branching Now, I want to use Git as the backbone, repository, and source control of my open source projects. My projects are in C#, JavaScript, or PHP language with MySQL, or SQL Server databases as the storage mechanism. I just used github.com's help for this purpose and I created a profile there, and downloaded a GUI for Git. Up to this part was so easy. But I'm almost stuck at going along any further. I just want to do some simple (really simple) operations, including: Creating a project on Git and mapping it to a folder on my laptop Checking out/checking in files and folders Resolving conflicts That's all I need to do now. But it seems that the GUI is not that user friendly. I expect the GUI to have a Connect To... or something like that, and then I expect a list of projects to be shown, and when I choose one, I expect to see the list of files and folders of that project, just like exploring your TFS project in Visual Studio. Then I want to be able to right click a file and select check-in... or check-out and stuff like that. Do I expect much? What should I do to easily use Git just like TFS? What am I missing here?

  Read the article

• Implmenting RLE into a tilemap or how to create a large 3D array?

  - by Smallbro

  Currently I've been using a 3D array for my tiles in a 2D world but the 3D side comes in when moving down into caves and whatnot. Now this is not memory efficient and I switched over to a 2D array and can now have much larger maps. The only issue I'm having now is that it seems that my tiles cannot occupy the same space as a tile on the same z level. My current structure means that each block has its own z variable. This is what it used to look like: map.blockData[x][y][z] = new Block(); however now it works like this map.blockData[x][y] = new Block(z); I'm not sure why but if I decide to use the same space on say the floor below it wont allow me to. Does anyone have any ideas on how I can add a z-axis to my 2D array? I'm using java but I reckon the concept carries across different languages. Edit: As Will posted, RLE sounds like the best method for achieving a fast 3D array. However I'm struggling to understand how I would even start to implement it? Would I create a 4D array the 4th being something which controls how many to skip? Or would the x-axis simply change altogether and have large gaps in between - for example [5][y][z] would skip 5 tiles? Is there something really obvious here which I am missing? The number of z levels I'm trying to have is around 66, it would be preferably that I can have up to or more than 1000 in x and y.

  Read the article

• Cannot boot into ubuntu 12.10

  - by sriram

  Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

  Read the article

• CodePlex Daily Summary for Sunday, November 25, 2012

  CodePlex Daily Summary for Sunday, November 25, 2012Popular ReleasesMath.NET Numerics: Math.NET Numerics v2.3.0: Common: Continued major linear algebra storage rework, in this release focusing on vectors (previous release was on matrices) Static CreateRandom for all dense matrix and vector types Thin QR decomposition (in additin to existing full QR) Consistent static Sample methods for continuous and discrete distributions (was previously missing on a few) Portable build adds support for WP8 (.Net 4.0 and higher, SL5, WP8 and .NET for Windows Store apps) Various bug, performance and usability ...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.1: +2012-11-25 v3.2.1 +????????。 -MenuCheckBox?CheckedChanged??????，??????????。 -???????window.IDS??????????????。 -?????（??TabCollection，ControlBaseCollection）???，????????????????。 +Grid??。 -??SelectAllRows??。 -??PageItems??，?????????????，?????、??、?????。 -????grid/gridpageitems.aspx、grid/gridpageitemsrowexpander.aspx、grid/gridpageitems_pagesize.aspx。 -???????????????????。 -??ExpandAllRowExpanders??，?????????????????（grid/gridrowexpanderexpandall2.aspx）。 -??????ExpandRowExpande...VidCoder: 1.4.9 Beta: Updated HandBrake core to SVN 5079. Fixed crashes when encoding DVDs with title gaps.ZXing.Net: ZXing.Net 0.10.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2521 of the java version windows phone 8 assemblies improvements and fixesCharmBar: Windows 8 Charm Bar for Windows 7: Windows 8 Charm Bar for Windows 7BlackJumboDog: Ver5.7.3: 2012.11.24 Ver5.7.3 (1)SMTP???????、?????????、??????????????????????? (2)?????????、?????????????????????????? (3)DNS???????CNAME????CNAME????????????????? (4)DNS????????????TTL???????? (5)???????????????????????、?????????????????? (6)???????????????????????????????TEncoder: 3.1: -Added: Turkish translation (Translators, please see "To translators.txt") -Added: Profiles are now stored in different files under "Profiles" folder -Added: User created Profiles will be saved in a differen directory -Added: Custom video and audio options to profiles -Added: Container options to profiles -Added: Parent folder of input file will be created in the output folder -Added: Option to use 32bit FFmpeg eventhough the OS is 64bit -Added: New skin "Mint" -Fixed: FFMpeg could not open A...Liberty: v3.4.3.0 Release 23rd November 2012: Change Log -Added -H4 A dialog which gives further instructions when attempting to open a "Halo 4 Data" file -H4 Added a short note to the weapon editor stating that dropping your weapons will cap their ammo -Reach Edit the world's gravity -Reach Fine invincibility controls in the object editor -Reach Edit object velocity -Reach Change the teams of AI bipeds and vehicles -Reach Enable/disable fall damage on the biped editor screen -Reach Make AIs deaf and/or blind in the objec...Umbraco CMS: Umbraco 4.11.0: NugetNuGet BlogRead the release blog post for 4.11.0. Whats new50 bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesGetPropertyValue now returns an object, not a string (only affects upgrades from 4.10.x to 4.11.0) NoteIf you need Courier use the release candidate (as of build 26). The code editor has been greatly improved, but is sometimes problematic in Internet Explorer 9 and lower. Previously it was just disabled for IE and...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.3: Fixed supported files list on open dialog (added .pls and .m3u) Impulse Media Player splash message (can be disabled anyway)WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...HigLabo: HigLabo_20121119: HigLabo_2012111 --HigLabo.Mail-- Modify bug fix of ExecuteAppend method. Add ExecuteXList method to ImapClient class. --HigLabo.Net.WindowsLive-- Add AsyncCall to WindowsLiveClient class.SharePoint CAML Extensions: Version 1.1: Beta version! <Membership>, <Today/>, <Now/> and <UserID /> tags are not supported!mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...Keleyi: keleyi-1.1.0: ????： .NET Framework 4.0 ??：MD5??，?????IP??（??????），????? www.keleyi.com keleyi.codeplex.comHoliday Calendar: Calendar Control: Month navigation introduced.NDateTime: Version 1.0: This is the first releaseNew Projects.NET vFaceWall: .NET vFaceWall is autility script written in asp.net which allows developer to build next generation facebook wall style user profiles for asp.net websites.29th Infantry Division Engineer Corps: Code repository and project management hub for the 29th Infantry Division's Engineer Corps.A.M. Lost: A.M. Lost is game project developed during the GameDevParty Jam 3 event (23-24-25 november 2012).ABAP BLOG MIKE: ABAP blog AgileNETSlayer: Agile.Net Deobfuscator, supports all obfuscation methods.BERP Games: This project site contains XNA game development concepts and software produced by BERP Games.CFileUpload: This project will let you upload files with progress bar, without using Flash, HTML5 or similar technologies that the user's browser might not have. CharmBar: Windows 8 Charm Bar is a application that works just like the Windows 8 CharmBar. The word charmbar, the Windows 8 Logo are trademarks of Microsoft Corporation.Confidentialité des données: Développer une application permettant de faciliter la mise en œuvre, l’utilisation et la gestion de ces outils, en exploitant les API .NET.End of control: Project has not been started yet. Just absorbing attentions.Enhanced XML Search: Easy and fastest methods to manipulate XML Data.Exchange Automatic Replies Administrator: Exchange Automatic Replies Administrator is a PowerShell GUI tool for Helpdesk and Sysadmins to set a users' Out-Of-Office without using the command line.File Explorer for WPF: FileExplorer is a WPF control that's emulate the Windows Explorer, it supports both FIleSystem and non-FileSystem class.ForcePlot: Using brute force, plots any difficult equation even some popular software cannot plot. Currently supports 2D graphs, trigonometric and logarithmic functions.Game Dev: Currently in ideas phaseGroupEmulationEMK11: Discussion and sharing of member data Group Emulation Engineering Mechanical 2011Jenkins CI: Views, Jobs, Build status and color. mvcMusicOnLine: mvcMusicOnLinemy own site project no 1: still testing...Nauplius.KeyStore: Provides secure application key storage backed by SQL 2008 and Active Directory.Noctl Library: Noctl is a C# multiplatform Library.open Archive Mediator: High-performance middle-ware for process historiansOpen Source Game - Prince's Revenge: Open Source Game.PackToKindle: Project allow to send folder content to your kindle. Functionality is the same as the official SendToKindle application, but this project is designed to use froPunkPong: PunkPong is an open source "Pong" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard or mouse. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Quick Data Processor: A simple and quick data processor for csv files.SFProject: It'll be a game at some pointsilverlight ? flash? policy ??: silverlight? flash? policy socket server? ??Universe.WCF.Behaviors: Universe.WCF.Behaviors provides behaviors: - Easy migration from Remoting - Transparent delivery - Traffic Statistics - WCF Streaming Adaptor for BinaryWriter and TextWriter - etc WowDotNetAPI for Silverlight: Silverlight class library implementation of Briam Ramos World Of Warcraft WowDotNetAPI .NET library on GitHub ( https://github.com/briandek/WowDotNetAPI ) C# .Net library to access the new World of Warcraft Community Platform API.WP7NUMConvert: A really simple project to create a small library for number conversions in multiple formats. Written in VB for Windows PhoneWPF CodeEditor: The Dev Tools project is intended to contain a set of features, tools & controls useful for development purposes.

  Read the article

• Breakout ball collision detection, bouncing against the walls

  - by Sri Harsha Chilakapati

  I'm currently trying to program a breakout game to distribute it as an example game for my own game engine. http://game-engine-for-java.googlecode.com/ But the problem here is that I can't get the bouncing condition working properly. Here's what I'm using. public void collision(GObject other){ if (other instanceof Bat || other instanceof Block){ bounce(); } else if (other instanceof Stone){ other.destroy(); bounce(); } //Breakout.HIT.play(); } And here's by bounce() method public void bounce(){ boolean left = false; boolean right = false; boolean up = false; boolean down = false; if (dx < 0) { left = true; } else if (dx > 0) { right = true; } if (dy < 0) { up = true; } else if (dy > 0) { down = true; } if (left && up) { dx = -dx; } if (left && down) { dy = -dy; } if (right && up) { dx = -dx; } if (right && down) { dy = -dy; } } The ball bounces the bat and blocks but when the block is on top of the ball, it won't bounce and moves upwards out of the game. What I'm missing? Is there anything to implement? Please help me.. Thanks

  Read the article

• How AlphaBlend Blendstate works in XNA 4 when accumulighting light into a RenderTarget?

  - by cubrman

  I am using a Deferred Rendering engine from Catalin Zima's tutorial: His lighting shader returns the color of the light in the rgb channels and the specular component in the alpha channel. Here is how light gets accumulated: Game.GraphicsDevice.SetRenderTarget(LightRT); Game.GraphicsDevice.Clear(Color.Transparent); Game.GraphicsDevice.BlendState = BlendState.AlphaBlend; // Continuously draw 3d spheres with lighting pixel shader. ... Game.GraphicsDevice.BlendState = BlendState.Opaque; MSDN states that AlphaBlend field of the BlendState class uses the next formula for alphablending: (source × Blend.SourceAlpha) + (destination × Blend.InvSourceAlpha), where "source" is the color of the pixel returned by the shader and "destination" is the color of the pixel in the rendertarget. My question is why do my colors are accumulated correctly in the Light rendertarget even when the new pixels' alphas equal zero? As a quick sanity check I ran the following code in the light's pixel shader: float specularLight = 0; float4 light4 = attenuation * lightIntensity * float4(diffuseLight.rgb,specularLight); if (light4.a == 0) light4 = 0; return light4; This prevents lighting from getting accumulated and, subsequently, drawn on the screen. But when I do the following: float specularLight = 0; float4 light4 = attenuation * lightIntensity * float4(diffuseLight.rgb,specularLight); return light4; The light is accumulated and drawn exactly where it needs to be. What am I missing? According to the formula above: (source x 0) + (destination x 1) should equal destination, so the "LightRT" rendertarget must not change when I draw light spheres into it! It feels like the GPU is using the Additive blend instead: (source × Blend.One) + (destination × Blend.One)

  Read the article

• juju bootstrap key error?

  - by mxdog

  I followed the guides the best as i could. there is some information missing like do as root or as regular user ..formatting, quotes no quotes..what the password or paraphrase for ssh should be ..couple other trivial things. that im sure add up to where im at (stuck!) so i have a working mass server on mx-nas-01 and 3 nodes and have been trying to get juju to start. I have tried this as both root and my regular account, sudo no-sudo and here is the output i get from juju bootstrap (however i try it) I don't know if this could be a host,domain,account issue or what i will mention i did have to shut off my dhcp server and install masq (all defaults) to get the maas pxe to work for the nodes mxdog@mx-nas-01:/$ juju bootstrap Traceback (most recent call last): File "/usr/bin/juju", line 8, in main(sys.argv[1:]) File "/usr/lib/python2.7/dist-packages/juju/control/init.py", line 183, in main env_config.load_or_write_sample() File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 229, in load_or_write_sample self.load() File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 115, in load self.parse(file.read(), path) File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 138, in parse config = SCHEMA.coerce(config, []) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 266, in coerce new_dict[k] = self.schema[k].coerce(v, path) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 233, in coerce new_subvalue = self.value_schema.coerce(subvalue, value_path) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 301, in coerce return self.schemas[selected].coerce(value, path) KeyError: 'mass' environments: maas: type: mass mass-server: http://192.168.0.30:80/MAAS mass-oauth: tDRdtJeEKVARBh93eT:N5dK5HSZBsA45cBdx9:S8wMNrfkT9PeYvQN9YrnbHGxmKARv8vb admin-secret: ########## default-series: precise

  Read the article

• TBXML parsing issue while the value cannot get in UILabel

  - by Dany

  In my app I'm using TBXML parser where I need to get a value from xml file and print it on the label. This is my xml file in server <gold> <price> <title>22 K Gold</title> </price> <price> <title>24 K Gold</title> </price> </gold> any my Viewcontroller.h looks like #import <UIKit/UIKit.h> #import "TBXML.h" @interface ViewController : UIViewController{ IBOutlet UILabel *lab; IBOutlet UILabel *lab1; TBXML *tbxml; } @end and my Viewcontrooler.m looks like - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. NSData *xmlData = [[NSData alloc]initWithContentsOfURL:[NSURL URLWithString:@"http://www.abcde.com/sample.xml"]]; tbxml = [[TBXML alloc]initWithXMLData:xmlData]; TBXMLElement * root = tbxml.rootXMLElement; if (root) { TBXMLElement * elem_PLANT = [TBXML childElementNamed:@"price" parentElement:root]; while (elem_PLANT !=nil) { TBXMLElement * elem_BOTANICAL = [TBXML childElementNamed:@"title" parentElement:elem_PLANT]; NSString *botanicalName = [TBXML textForElement:elem_BOTANICAL]; lab.text=[NSString stringWithFormat:@"re %@", botanicalName]; elem_PLANT = [TBXML nextSiblingNamed:@"price" searchFromElement:elem_PLANT]; elem_BOTANICAL = [TBXML childElementNamed:@"title" parentElement:elem_PLANT]; botanicalName = [TBXML textForElement:elem_BOTANICAL]; lab1.text=[NSString stringWithFormat:@"re %@", botanicalName]; } } } I'm getting BAD_ACCESS thread. Am I missing anything?

  Read the article

• how can I get 32-bit program to run on 64-bit Ubuntu?

  - by Carol

  Sorry to be asking this, but I have read quite a few posts and articles a lot of places wrt the issue I am having, to no avail. I am trying to get a Second Life Viewer (Firestorm) to run, and just keep getting the '64-bit error message' it throws. I have installed every 32-lib I can find, still doesn't work. I think I am surely missing some setting somewhere, or running Firestorm from the wrong place, or something, but I have no idea what. FWIW, Firestorm loads but doesn't behave right in the 32-bit version, either. I have actually tried several linux distros, 32 and 64-bit. Mint 32-bit runs it straight off, and Mint 64-bit throws the '64-bit error'. openSUSE, any version, won't run it at all. Oh, and all the other SL viewers I have tried behave the same way. I am beginning to wonder if my set-up just doesn't like linux. Here is my system info: CPU: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (2661 MHz) Memory: 4026 MB OS Version: Linux 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 Graphics Card Vendor: ATI Technologies Inc. Graphics Card: ATI Radeon HD 5700 Series I appreciate any help anyone can give me! Thanks so much! Carol :)

  Read the article

• NetBeans Hangs on New Project Creation

  - by Jason

  When creating a New Project in NetBeans, it hangs on the creation screen; Screenshot I'm running Netbeans 7.0.1 on Xubuntu 13.04. Java -version prints: java version "1.7.0_25" OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1ubuntu0.13.04.2) OpenJDK 64-Bit Server VM (build 23.7-b01, mixed mode) /usr/lib/jvm/ contains the following folders; java-1.5.0-gcj-4.7-amd64 java-6-openjdk-amd64 java-7-openjdk-common java-1.6.0-openjdk-amd64 java-6-openjdk-common java-1.7.0-openjdk-amd64 java-7-openjdk-amd64 I tried editing /usr/share/netbeans/7.0.1/etc/netbeans.conf with the following (as was suggested in another post); netbeans_jdkhome="/usr/lib/jvm/java-7-openjdk-amd64/jre/" But that didn't work. Instead, NetBeans then presented an error on the loading splash when it reached "Turning on Modules..." claiming the JDK was missing. Both NetBeans and the OpenJDK Java 7/6 Runtimes were installed through the Ubuntu Software Centre. I've also tried uninstalling and reinstalling both Java and NetBeans. Any help would be greatly appreciated, thanks!

  Read the article

• Cannot access the filesystems using LiveCD (LVM2,EXT2)

  - by ftkg

  I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

  Read the article

• Include Binary Files in DEB package

  - by user22611

  I need to build a DEB package from mainly Node.js Javascript files, but it should include some binary files as well. They are listed inside debian/source/include-binaries. Otherwise I get the error message dpkg-source: error: unrepresentable changes to source The command in question is: bzr builddeb -- -us -uc After adding the file include-binaries, when running bzr builddeb -- -us -uc again, now I get a different error: It says dpkg-source: error: aborting due to unexpected upstream changes, see /tmp/mailadmin_0.0-1.diff.n6m5_6 I have no idea how to get rid of this. In the next line of output it tells me dpkg-source: info: you can integrate the local changes with dpkg-source --commit But if I run this command in the build area of my package, it gives me the unrepresentable changes to source error message again, even though debian/source/include-binaries is present in the build area as well. I am missing the way out of this... I tried deleting all files that are produced by the build process, still no success. Further details: The target directory is /opt/mailadmin. Since this directory is unusual, I listed it in the file debian/mailadmin.install (which contains one line:) opt/mailadmin opt/ The bzr builddeb process uses this file as expected.

  Read the article

• Collision detection, stop gravity

  - by Scott Beeson

  I just started using Gamemaker Studio and so far it seems fairly intuitive. However, I set a room to "Room is Physics World" and set gravity to 10. I then enabled physics on my player object and created a block object to match a platform on my background sprite. I set up a Collision Detection event for the player and the block objects that sets the gravity to 0 (and even sets the vspeed to 0). I also put a notification in the collision event and I don't get that either. I have my key down and key up events working well, moving the player left and right and changing the sprites appropriately, so I think I understand the event system. I must just be missing something simple with the physics. I've tried making both and neither of the objects "solid". Pretty frustrating since it looks so easy. The player starting point is directly above the block object in the grid and the player does fall through the block. I even made the block sprite solid red so I could see it (initially it was invisible, obviously).

  Read the article

• Allow user to SUDO a script without password.

  - by John Isaacks

  I have a php script with this: <?php #echo exec('whoami'); $output = shell_exec('bash /usr/local/svn/bash_repo/make-live'); echo "$output"; ?> The make-live script contains this: #!/bin/bash cd /var/www-cake sudo svn checkout file:///usr/local/svn/bash_repo/repo/ echo "Head revision has been pushed to live server" So the PHP user who is www-data needs to have nopasswd for that script. I am told I need to add: www-data ALL=NOPASSWD: /usr/local/svn/bash_repo/make-live To sudoers to allow this. First I run sudo visudo but I have no experience with vi so I try to open it in gedit with export EDITOR=gedit && sudo -E visudo which then just opens a sudoers.tmp file which is empty. I add the line and save it. But it doesn't do save. So I just try sudo visudo and I add the line right beneath this part: # User privilege specification root ALL=(ALL) ALL www-data ALL=NOPASSWD: /usr/local/svn/bash_repo/make-live I closed out sudoers and reopened to verify that it has saved. I even restart apache. I run the php file and it still doesn't work. What am I missing?

  Read the article

• Samba new file ownership, permissions configuration

  - by Martin Melka

  I have recently installed Samba on my server. Now I have a question about permissions and how to set it up. Currently I mount the Samba shared drive to my laptop with this line in /etc/fstab: //<host>/share /mnt/melka-server-data/ cifs username=<usrname> password=<passwd> _netdev 0 0 This works, as I can read from the files and create them (as root). The problem is when I want to create files as a regular user. I always get a Permission Denied error. These are ll outputs of the mounted folder: magicmaster@magicmaster-kubuntu:/mnt$ ll total 8 drwxr-xr-x 3 root root 4096 lis 11 14:15 ./ drwxr-xr-x 26 root root 4096 ríj 26 11:01 ../ drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 melka-server-data/ and the inside: magicmaster@magicmaster-kubuntu:/mnt/melka-server-data$ ll total 4 drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 ./ drwxr-xr-x 3 root root 4096 lis 11 14:15 ../ drwxrwxrwx 5 magicmaster magicmaster 0 lis 12 09:35 downloads/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 28 12:57 lost+found/ drwxrwxrwx 15 magicmaster magicmaster 0 lis 12 09:45 movies/ drwxrwxrwx 2 magicmaster magicmaster 0 lis 1 21:15 newest/ drwxrwxrwx 3 magicmaster magicmaster 0 lis 2 23:14 photos/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 30 12:44 software/ -rw-r--r-- 1 nobody nogroup 0 lis 12 22:12 zdar I called sudo chown -R magicmaster:magicmaster melka-server-data/ to try and change all the files to belong to me. Then the file zdar was created by magicmaster just by calling touch. I got the Permission Denied, but it was still created, though it belongs to nobody and I can't write into it. When I create a file as root, it still belongs to nobody, but at least I can write into it. What am I missing? I didn't notice anything in Samba config that would be related to this and I don't like the idea of having to log on as root in order to copy files.. Thanks

  Read the article

• Cannot mount USB drive -- FSTAB error

  - by user107646

  Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

  Read the article

• POP Forums will be at Mix!

  - by Jeff

  If you've never been to Mix, you're missing out on what is arguably one of the best conferences that Microsoft does. I'm not just saying that because I work here... I felt that way before, having been to most of them. The breadth of people and disciplines make it a really exciting event that pushes it well beyond the "Redmond bubble," as I like to call it. You should go.In any case, there's an Open Source Fest happening the night before Mix starts, on Monday, from 6 to 9 p.m. There will be people there representing a ton of great projects, some as enormous as Umbraco, as well as people doing SDK's, controls and other neat stuff. Best of all, you get to vote for your favorites. Unless your favorite is Orchard, because Microsoft is sponsoring that directly. Or if it's POP Forums, not because Microsoft is sponsoring it, but because that's where I work in my day job. No prizes for me! Come by and say hello. I think the app will be nearly final by then, and it's already running on MouseZoom, one of my little side projects.The quality and diversity of open source projects around the Microsoft stack just keeps getting better. Our platform is also pretty great at running stuff we don't make. This will be a pretty exciting Mix. Can't wait!

  Read the article

• glibc not found when trying to install Absinthe?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• Split a 2D scene in layers or have a z coordinate

  - by Bane

  I am in the process of writing a 2D game engine, and a dilemma emerged. Let me explain the situation... I have a Scene class, to which various objects can be added (Drawable, ParticleEmitter, Light2D, etc), and as this is a 2D scene, things will obviously be drawn over each other. My first thought was that I could have basic add and remove methods, but I soon realized that then there would be no way for the programmer to control the order in which things were drawn. So I can up with two options, each with its pros and cons. A) Would be to split the scene in layers. By that I mean instead of having the scene be a container of objects, have it be a container of layers, which are in turn the containers of objects. B) Would require to have some kind of z-coordinate, and then have the scene sorted so objects with lower z get drawn first. Option A is pretty solid, but the problem is with the lights. In what layer do I add it? Does it work cross-layer? On all bottom layers? And I still need the Z coordinate to calculate the shadow! Option B would require me to change all my code from having Vector2D positions, to some kind of class that inherits from Vector2D and adds a z coordinate to it (I don't want it to be a Vector3D because I still need all the same methods the 2D kind has, just with .z clamped on). Am I missing something? Is there an alternative to these methods? I'm working in Javascript, if that makes a difference.

  Read the article

• Ubuntu openGL issues

  - by Dank101

  my OpenGL doesn't work at all i get Xlib: extension "GLX" missing on display ":0". lspci output 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1246] (rev a1) (prog-if 00 [VGA controller]) dmesg | grep -i nvid [ 9.469068] nvidia: module license 'NVIDIA' taints kernel. [ 9.538786] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538792] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538796] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.538803] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.538809] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.538942] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.48 Sun Sep 9 [10300.955799] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10300.955803] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfff80000) [10300.955807] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001) [10300.955811] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xd000000c) [10300.955814] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [10300.955817] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [10300.955820] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x10) [10300.955823] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100007) my computer is a dell XPS l702x

  Read the article

• StyleCop 4.7.34.0 has been released

  - by TATWORTH

  StyleCop 4.7.34.0 was released, today, 6/July at http://stylecop.codeplex.com/releases/view/79972Compatible with the Visual Studio 2012 RC (11.0.50522).Install order should be : VS2008VS2010VS2012 RCR#6.1.1 (for VS2010)R#7.0 (tested with daily build 7.0.83.281) (down load from http://confluence.jetbrains.net/display/ReSharper/ReSharper+7+EAP)StyleCop This version is now compatible with R# 5.1 (5.1.3000.12), R# 6.0 (6.0.2202.688), R# 6.1 (6.1.37.86), R# 6.1.1 (6.1.1000.82) and R# 7.0 (7.0.83.281).Here are the bug details for fixed in 4.7 and closed in 4.7 issues (over 100 issues fixed since 4.6)Here are the bug details for all issues since 4.3.3.0 that have been fixed and closed (over 450 fixes).Updated Release Notes are available hereOnline Rules documentation is available hereFixes for this release are:Update ReSharper 7.0 references to 7.0.83.281Fix for 7343. Inheritdoc was raising false positives for some partial classes. Added regression test data.Fix for 7351. Remove the correct blank lines for SA1512 on code cleanup.Fix for 7346. Insert documentation fully on cleanup and on bulb items.Ensure that the SuppressMessage bulbItem can calculate the correct element to insert at.Fix for 7352. Module level suppressmessages were not working.Spelling mistake.Add missing typenames to resource file.Spelling fixes.Remove obsolete files.

  Read the article

• How to migrate user settings and data to new machine?

  - by torbengb

  I'm new to Ubuntu and recently started using it on my PC. I'm going to replace that PC with a new machine. I want to transfer my data and settings to the nettop. What aspects should I consider? Obviously I want to move my data over. What things am I missing if I only copy the entire home folder? This is a home pc (not corporate) so user rights and other security issues are not a concern, except that the files should be accessible on the new machine! Please take into account that the new machine is a nettop that doesn't have an optical drive and doesn't allow me to hook the old SATA disk into it, so any data transfer must be handled via home network (I can have both the old and the new machine turned on and connected to the home LAN) and I have an USB thumbdrive with limited capacity (2GB). This sounds like it might limit the general applicability, but it would in fact make it more general. I'll make this a wiki topic because there could be several "right" answers. Update: Or so I thought. I don't see a choice for that.

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >