Search Results

Search found 8440 results on 338 pages for 'wms implementation'.

Page 261/338 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Zend_Auth and database session SaveHandler

  - by takeshin

  I have created Zend_Auth adapter implementing Zend_Auth_Adapter_Interface (similar to Pádraic's adapter) and created simple ACL plugin. Everything works fine with default session handler. So far, so good. As a next step I have created custom Session SaveHandler to persist session data in the database. My implementation is very similar to this one from parables-demo. Seems that everything is working fine. Session data are properly saved to the database, session objects are serialized, but authentication does not work when I enable this custom SaveHandler. I have debugged the authentication and all works fine up till the next request, when the authentication data are lost. I suspected, that is has something to do with the fact, that I use $adapter->write($object) instead $adapter->write($string), but the same happens with strings. I'm bootstrapping Zend_Application_Resource_Session in the first Bootstrap method, as early as possible. Does Zend_Auth need any extra configuration to persist data in the database? Why the authentity is being lost?

  Read the article

• Safe and polymorphic toEnum

  - by jetxee

  I'd like to write a safe version of toEnum: safeToEnum :: (Enum t, Bounded t) => Int -> Maybe t A naive implementation: safeToEnum :: (Enum t, Bounded t) => Int -> Maybe t safeToEnum i = if (i >= fromEnum (minBound :: t)) && (i <= fromEnum (maxBound :: t)) then Just . toEnum $ i else Nothing main = do print $ (safeToEnum 1 :: Maybe Bool) print $ (safeToEnum 2 :: Maybe Bool) And it doesn't work: safeToEnum.hs:3:21: Could not deduce (Bounded t1) from the context () arising from a use of `minBound' at safeToEnum.hs:3:21-28 Possible fix: add (Bounded t1) to the context of an expression type signature In the first argument of `fromEnum', namely `(minBound :: t)' In the second argument of `(>=)', namely `fromEnum (minBound :: t)' In the first argument of `(&&)', namely `(i >= fromEnum (minBound :: t))' safeToEnum.hs:3:56: Could not deduce (Bounded t1) from the context () arising from a use of `maxBound' at safeToEnum.hs:3:56-63 Possible fix: add (Bounded t1) to the context of an expression type signature In the first argument of `fromEnum', namely `(maxBound :: t)' In the second argument of `(<=)', namely `fromEnum (maxBound :: t)' In the second argument of `(&&)', namely `(i <= fromEnum (maxBound :: t))' As well as I understand the message, the compiler does not recognize that minBound and maxBound should produce exactly the same type as in the result type of safeToEnum inspite of the explicit type declaration (:: t). Any idea how to fix it?

  Read the article

• 'C++ object destroyed' in QComboBox descendant editor in delegate

  - by Max

  Hi, all! I have modified combobox to hold colors, using QtColorCombo (http://qt.nokia.com/products/appdev/add-on-products/catalog/4/Widgets/qtcolorcombobox) as howto for the 'more...' button implementation details. It works fine in C++ and in PyQt on linux, but I get 'underlying C++ object was destroyed' when use this control in PyQt on Windows. It seels like the error happens when: ... # in constructor: self.activated.connect(self._emitActivatedColor) ... def _emitActivatedColor(self, index): if self._colorDialogEnabled and index == self.colorCount(): print '!!!!!!!!! QtGui.QColorDialog.getColor()' c = QtGui.QColorDialog.getColor() # <----- :( delegate fires 'closeEditor' print '!!!!!!!!! ' + c.name() if c.isValid(): self._numUserColors += 1 #at the next line currentColor() tries to access C++ layer and fails self.addColor(c, self.currentColor().name()) self.setCurrentIndex(index) ... Maybe console output will help. I've overridden event() in editor and got: ... MouseButtonRelease FocusOut Leave Paint Enter Leave FocusIn !!!!!!!!! QtGui.QColorDialog.getColor() WindowBlocked Paint WindowDeactivate !!!!!!!!! 'CloseEditor' fires! Hide HideToParent FocusOut DeferredDelete !!!!!!!!! #6e6eff ... Can someone explain, why there is such a different behaviour in the different environments, and maybe give a workaround to fix this. Here is minimal example: http://docs.google.com/Doc?docid=0Aa0otNVdbWrrZDdxYnF3NV80Y20yam1nZHM&hl=en

  Read the article

• Rtti data manipulation and consistency in Delphi 2010

  - by Coco

  Has anyone an idea, how I can make TValue using a reference to the original data? In my serialization project, I use (as suggested in XML-Serialization) a generic serializer which stores TValues in an internal tree-structure (similar to the MemberMap in the example). This member-tree should also be used to create a dynamic setup form and manipulate the data. My idea was to define a property for the Data: TDataModel <T> = class {...} private FData : TValue; function GetData : T; procedure SetData (Value : T); public property Data : T read GetData write SetData; end; The implementation of the GetData, SetData Methods: procedure TDataModel <T>.SetData (Value : T); begin FData := TValue.From <T> (Value); end; procedure TDataModel <T>.GetData : T; begin Result := FData.AsType <T>; end; Unfortunately, the TValue.From method always makes a copy of the original data. So whenever the application makes changes to the data, the DataModel is not updated and vice versa if I change my DataModel in a dynamic form, the original data is not affected. Sure I could always use the Data property before and after changing anything, but as I use lot of Rtti inside my DataModel, I do not realy want to do this anytime. Perhaps someone has a better suggestion?

  Read the article

• Visual C++ overrides/mock objects for unit testing?

  - by Mark

  When I'm running unit tests, I want to be able to "stub out" or create a mock object, but I'm running into DLL Hell. For example: There are two DLL libraries built: A.dll and B.dll -- Classes in A.dll have calls to classes in B.dll so when A.dll was built, the link line was using B.lib for the defintions. My test driver (Foo.exe) is testing classes in A.dll, so it links against A.lib. However, I want to "stub out" some of the calls A.dll makes to B.dll with simple versions (return basic value, no DB look up, etc). I can't build an Override.dll that just overrides the needed methods (not entire classes) and replace B.dll because Foo.exe will A) complain that B.dll is missing if I just remove it and put Override.dll in it's place or B) if I rename Override.dll to B.dll, Foo.exe complains that there are unresolved symbols because Override.dll is not a complete implementation of B.dll. Is there a way to do this? Is there a way to statically link Foo.exe with A.lib, B.lib and Override.lib such that it will work without having to completely rebuild A.lib and B.lib to remove the __delcspec(dllexport)? Is there another option?

  Read the article

• NSOperations or NSThread for bursts of smaller tasks that continuously cancel each other?

  - by RickiG

  Hi I would like to see if I can make a "search as you type" implementation, against a web service, that is optimized enough for it to run on an iPhone. The idea is that the user starts typing a word; "Foo", after each new letter I wait XXX ms. to see if they type another letter, if they don't, I call the web service using the word as a parameter. The web service call and the subsequent parsing of the result I would like to move to a different thread. I have written a simple SearchWebService class, it has only one public method: - (void) searchFor:(NSString*) str; This method tests if a search is already in progress (the user has had a XXX ms. delay in their typing) and subsequently stops that search and starts a new one. When a result is ready a delegate method is called: - (NSArray*) resultsReady; I can't figure out how to get this functionality 'threaded'. If I keep spawning new threads each time a user has a XXX ms. delay in the typing I end up in a bad spot with many threads, especially because I don't need any other search, but the last one. Instead of spawning threads continuously, I have tried keeping one thread running in the background all the time by: - (void) keepRunning { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; SearchWebService *searchObj = [[SearchWebService alloc] init]; [[NSRunLoop currentRunLoop] run]; //keeps it alive [searchObj release]; [pool release]; } But I can't figure out how to access the "searchFor" method in the "searchObj" object, so the above code works and keeps running. I just can't message the searchObj or retrieve the resultReady objects? Hope someone could point me in the right direction, threading is giving me grief:) Thank you.

  Read the article

• C# Fun with Generics - Mutual Dependencies

  - by Kenneth Cochran

  As an experiment I'm trying to write a generic MVP framework. I started with: public interface IPresenter<TView> where TView: IView<IPresenter<... { TView View { get; set;} } public interface IView<TPresenter> where TPresenter:IPresenter<IView<... { TPresenter Presenter { get; set; } } Obviously this can't work because the types of TView and TPresenter can't be resolved. You'd be writing Type<Type<... forever. So my next attempt looked like this: public interface IView<T> where T:IPresenter { ... } public interface IView:IView<IPresenter> { } public interface IPresenter<TView> where TView: IView { ... } public interface IPresenter: IPresenter<IView> { ... } This actually compiles and you can even inherit from these interfaces like so: public class MyView : IView, IView<MyPresenter> { ... } public class MyPresenter : IPresenter, IPresenter<MyView> { ... } The problem is in the class definition you have to define any members declared in the generic type twice. Not ideal but it still compiles. The problem's start creeping up when you actually try to access the members of a Presenter from a View or vice versa. You get an Ambiguous reference when you try to compile. Is there any way to avoid this double implementation of a member when you inherit from both interfaces? Is it even possible to resolve two mutually dependent generic types at compile time?

  Read the article

• Why can't I pass self as a named argument to an instance method in Python?

  - by Joseph Garvin

  This works: >>> def bar(x, y): ... print x, y ... >>> bar(y=3, x=1) 1 3 And this works: >>> class foo(object): ... def bar(self, x, y): ... print x, y ... >>> z = foo() >>> z.bar(y=3, x=1) 1 3 And even this works: >>> foo.bar(z, y=3, x=1) 1 3 But why doesn't this work? >>> foo.bar(self=z, y=3, x=1) Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: unbound method bar() must be called with foo instance as first argument (got nothing instead) This makes metaprogramming more difficult, because it requires special case handling. I'm curious if it's somehow necessary by Python's semantics or just an artifact of implementation.

  Read the article

• iphone NSMutableArray loses objects at end of method

  - by Brodie4598

  Hello - in my app, an NSMutableArray is populated with an object in viewDidLoad (eventually there will be many objects but I'm just doing one til I get it working right). I also start a timer that starts a method that needs to access the NSMutableArray every few seconds. The NSMutableArray works fine in viewDidLoad, but as soon as that method is finished, it loses the object. myApp.h @interface MyApp : UIViewController { NSMutableArray *myMutableArray; NSTimer *timer; } @property (nonatomic, retain) NSMutableArray *myMutableArray; @property (nonatomic, retain) NSTimer *timer; @end myApp.m #import "MyApp.h" @implementation MyApp @synthesize myMutableArray; - (void) viewDidLoad { cycleTimer = [NSTimer scheduledTimerWithTimeInterval:4.0 target:self selector:@selector(newCycle) userInfo: nil repeats:YES]; MyObject *myCustomUIViewObject = [[MyObject alloc]init]; [myMutableArray addObject:myCustomUIViewObject]; [myCustomUIViewObject release]; NSLog(@"%i",[myMutableArray count]); /////outputs "1" } -(void) newCycle { NSLog(@"%i",[myMutableArray count]); /////outputs "0" ?? why is this?? }

  Read the article

• Font advance calculation problem on Blackberry OS 5.0

  - by John

  I am currently working on my own implementation of a tab bar for a BlackBerry app, where each tab bar has a title that is right aligned (i.e. the last character in each should be the same distance from the right hand side of the screen). To work out where to draw the text I am using the following calculation: screen width - advance of title - indent. The font I am using is 'BBAlpha Sans' (height 28). Using BlackBerry OS 4.6 everything seems to be calculated properly and the text is aligned when I move between tabs, however I am finding that when I use OS 5.0 it doesn't calculate the advance properly and as a result the alignment is off by maybe 5 pixels or so. With the default font (also BBAlpha Sans, but height 24 - for OS 5.0 at least) it works fine in both versions.. but I don't necessarily always want to use the default font/size, so any ideas what could be going wrong? Is this a bug in the 5.0 API? Thanks. Code: public class TitleBarBackground extends Background { .. public void draw(Graphics graphics, XYRect rect) { graphics.pushRegion(rect); .. Font titleBarFont = FontFamily.forName("BBAlpha Sans").getFont(Font.PLAIN, 28); ... int textWidth = titleBarFont.getAdvance(title); graphics.drawText(title, rect.width - textWidth - TITLE_OFFSET, textYOffset); graphics.popContext(); } .. }

  Read the article

• Values are not returning from MY SQL database to my java class

  - by sam

  Hi, This is my Query DELIMITER $$ DROP PROCEDURE IF EXISTSdiscoverdb.getuser_info$$ # MySQL returned an empty result set (i.e. zero rows). `CREATE PROCEDURE discoverdb.getuser_info ( IN name VARCHAR(100), IN pass VARCHAR(100) ) BEGIN SELECT * FROM ad_user WHERE sLogin = name AND sPassHash=password(pass); END $$ # MySQL returned an empty result set (i.e. zero rows). DELIMITER ; This is my calling method public Authentication getAuthentication (String username,String password) { //TODO write your implementation code here: Authentication ack = new Authentication(); try{ String simpleProc = "{ call getuser_infosam(?,?)}"; java.sql.CallableStatement cs = con.prepareCall(simpleProc); cs.setString(1, username); cs.setString(2, password); java.sql.ResultSet rs = cs.executeQuery(); while (rs.next()) { System.out.println(rs.getString("sLogin")); System.out.println(rs.getString("sPassHash")); System.out.println(rs.getString("sForename")); System.out.println(rs.getString("sName")); System.out.println(rs.getString("company")); System.out.println(rs.getString("sEmail")); rs.close();} }catch ( Exception e) { e.printStackTrace(); System.out.print(e); } return ack; }

  Read the article

• iPhone: Using dispatch_after to mimick NSTimer

  - by Joseph Tura

  Don't know a whole lot about blocks. How would you go about mimicking a repeating NSTimer with dispatch_after? My problem is that I want to "pause" a timer when the app moves to the background, but subclassing NSTimer does not seem to work. I tried something which seems to work. I cannot judge its performance implications or whether it could be greatly optimized. Any input is welcome. #import "TimerWithPause.h" @implementation TimerWithPause @synthesize timeInterval; @synthesize userInfo; @synthesize invalid; @synthesize invocation; + (TimerWithPause *)scheduledTimerWithTimeInterval:(NSTimeInterval)aTimeInterval target:(id)aTarget selector:(SEL)aSelector userInfo:(id)aUserInfo repeats:(BOOL)aTimerRepeats { TimerWithPause *timer = [[[TimerWithPause alloc] init] autorelease]; timer.timeInterval = aTimeInterval; NSMethodSignature *signature = [[aTarget class] instanceMethodSignatureForSelector:aSelector]; NSInvocation *aInvocation = [NSInvocation invocationWithMethodSignature:signature]; [aInvocation setSelector:aSelector]; [aInvocation setTarget:aTarget]; [aInvocation setArgument:&timer atIndex:2]; timer.invocation = aInvocation; timer.userInfo = aUserInfo; if (!aTimerRepeats) { timer.invalid = YES; } [timer fireAfterDelay]; return timer; } - (void)fireAfterDelay { dispatch_time_t delay = dispatch_time(DISPATCH_TIME_NOW, self.timeInterval * NSEC_PER_SEC); dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0); dispatch_after(delay, queue, ^{ [invocation performSelectorOnMainThread:@selector(invoke) withObject:nil waitUntilDone:NO]; if (!invalid) { [self fireAfterDelay]; } }); } - (void)invalidate { invalid = YES; [invocation release]; invocation = nil; [userInfo release]; userInfo = nil; } - (void)dealloc { [self invalidate]; [super dealloc]; } @end

  Read the article

• WCF REST adding data using POST or PUT 400 Bad Request

  - by user55474

  HI How do i add data using wcf rest architecture. I dont want to use the channelfactory to call my method. Something similar to the webrequest and webresponse used for GET. Something similar to the ajax WebServiceProxy restInvoke Or do i always have to use the Webchannelfactory implementation I am getting a 400 BAD request by using the following Dim url As String = "http://localhost:4475/Service.svc/Entity/Add" Dim req As WebRequest = WebRequest.Create(url) req.Method = "POST" req.ContentType = "application/xml; charset=utf-8" req.Timeout = 30000 req.Headers.Add("SOAPAction", url) Dim xEle As XElement xEle = <Entity xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <Name>Entity1</Name> </Entity> Dim sXML As String = xEle .Value req.ContentLength = sXML.Length Dim sw As New System.IO.StreamWriter(req.GetRequestStream()) sw.Write(sXML) sw.Close() Dim res as HttpWebResponse = req.GetResponse() Sercice Contract is as follows <OperationContract()> _ <WebInvoke(Method:="PUT", UriTemplate:="Entity/Add")> _ Function AddEntity(ByVal e1 As Entity) DataContract is as follows <Serializable()> _ <DataContract()> _ Public Class Entity private m_Name as String <DataMember()> _ Public Property Name() As String Get Return m_Name End Get Set(ByVal value As String) m_Name = value End Set End Property End Class thanks

  Read the article

• Is Stream.Write thread-safe?

  - by Mike Spross

  I'm working on a client/server library for a legacy RPC implementation and was running into issues where the client would sometimes hang when waiting to a receive a response message to an RPC request message. It turns out the real problem was in my message framing code (I wasn't handling message boundaries correctly when reading data off the underlying NetworkStream), but it also made me suspicious of the code I was using to send data across the network, specifically in the case where the RPC server sends a large amount of data to a client as the result of a client RPC request. My send code uses a BinaryWriter to write a complete "message" to the underlying NetworkStream. The RPC protocol also implements a heartbeat algorithm, where the RPC server sends out PING messages every 15 seconds. The pings are sent out by a separate thread, so, at least in theory, a ping can be sent while the server is in the middle of streaming a large response back to a client. Suppose I have a Send method as follows, where stream is a NetworkStream: public void Send(Message message) { //Write the message to a temporary stream so we can send it all-at-once MemoryStream tempStream = new MemoryStream(); message.WriteToStream(tempStream); //Write the serialized message to the stream. //The BinaryWriter is a little redundant in this //simplified example, but here because //the production code uses it. byte[] data = tempStream.ToArray(); BinaryWriter bw = new BinaryWriter(stream); bw.Write(data, 0, data.Length); bw.Flush(); } So the question I have is, is the call to bw.Write (and by implication the call to the underlying Stream's Write method) atomic? That is, if a lengthy Write is still in progress on the sending thread, and the heartbeat thread kicks in and sends a PING message, will that thread block until the original Write call finishes, or do I have to add explicit synchronization to the Send method to prevent the two Send calls from clobbering the stream?

  Read the article

• creating matrix with probabilities

  - by John Chan

  Hi all, I want to generate a matrix of NxN to test some code that I have where each row contains floats as the elements and has to add up to 1 (i.e. a row with a set of probabilities). Where it gets tricky is that I want to make sure that randomly some of the elements should be 0 (in fact most of the elements should be 0 except for some random ones to be the probabilities). I need the probabilities to be 1/m where m is the number of elements that are not 0 within a single row. I tried to think of ways to output this, but essentially I would need this stored in a C++ array. So even if I output to a file I would still have the issue of not having it in array as I need it. At the end of it all I need that array because I want to generate a Market Matrix file. I found an implementation in C++ to take an array and convert it to the market matrix file, so this is what I am basing my findings on. My input for the rest of the code takes in this market matrix file so I need that to be the primary form of output. The language does not matter, I just want to generate the file at the end (I found a way mmwrite and mmread in python as well) Please help, I am stuck and not really sure how to implement this.

  Read the article

• Cross-Platform Camera API

  - by Karim

  Hi, I'm now building a video transforming filter that have to transform video frames in real-time. One of the key requirements of the filter is to have high performance to minimize the number of dropped frames during the transform. Another requirement that is of lower priority but also nice to have is to make it cross-platform (both PC's and Mobile devices). The application is built in C++. Now my question is: is there any API that is more portable and has a similar or better performance characteristics than DirectShow? as DirectShow's portability is only limited to Windows-based devices (PCs and Windows Mobile&CE platforms). Also I've notices that for example using HTC's custom camera API has far better performance than what DirectShow offers. If you want to check this, try to build a filter in DirectShow that will multiply each color by 2 and render that in real-time from camera on the screen. Then do the same with HTC's API. There is almost 4-5x performance boost with vendor's specific API. So it'd be very nice if the library used the device-specific implementation of the driver, as performance is critical when doing this transforms on a mobile device (which is about ~500 MHz).

  Read the article

• Class unloading in java

  - by java_geek

  When a classloader is garbage collected, are the classes loaded by it unloaded? When the JVM is running is verbose mode, all the loaded classes are o/p. Similarly will the JVM log when it unloads a class? I wrote a custom class loader to test this, but could not see any verbose log for unloading of the classes. CustomClassLoader loader = new CustomClassLoader(new URL[]{}, CustomClassLoader.class.getClassLoader()); loader.addURL("D:\workspace\ClassLoaderTest\implementation.jar"); Class c = null; try { c = Class.forName("Horse",false,loader); if (c != null) { try { Animal animal = (Animal)c.newInstance(); animal.eat(); } catch(Exception ex) { ex.printStackTrace(); } } } catch(Exception e) { e.printStackTrace(); } loader = null; byte[] b = new byte[58*1024*1024]; System.gc(); ClassLoadingMXBean clBean = ManagementFactory.getClassLoadingMXBean(); System.out.println("Number of classes currently loaded " + clBean.getLoadedClassCount()); System.out.println("Number of classes loaded totally " + clBean.getTotalLoadedClassCount()); System.out.println("Number of classes unloaded " + clBean.getUnloadedClassCount()); Even the ClassLoadingMXBean gives number of unloaded classes as 0. How can i know that a class is unloaded when the class loader is GCed?

  Read the article

• Multiple websites, Single sign-on design

  - by Yannis

  Hi all, I have a question. A client I have been doing some work recently has a range of websites with different login mechanisms. He is looking to slowly migrate to a single sign-on mechanism for his websites (all written in asp.net mvc). I am looking at my options here, so here is a list of requirements: 1) It has to be secure (duh) 2) It needs to support extra user properties over and above the usual name, address stuff (such as money or credits for a user) 3) It has to provide a centralized user management web console for his convenience (I understand that this will be a small project on top of whatever design solution I choose to go for) 4) It has to integrate with the existing websites without re-engineering the whole product (I understand that this depends on the current product implementation). 5) It has to deal with emailing the user when he registers (in order for him to activate his account) 6) It has to deal with activating the user when he clicks the activate me link in the email (I understand that 5 and 6 require some form of email templating system to support different emails per application) I was thinking of creating a library working together with forms authentication that exposes whatever methods are required (e.g. login, logout, activate, etc. and a small restful service to implement activation from email, registration processing etc. Taking into account that loads of things have been left out to make this question brief and to the point, does this sound like a good design? But this looks like a very common problem so arent there any existing projects that I could use? Thanks for reading.

  Read the article

• C++: parsing with simple regular expression or shoud I use sscanf?

  - by Helltone

  I need to parse a string like func1(arg1, arg2); func2(arg3, arg4);. It's not a very complex parsing problem, so I would prefer to avoid resorting to flex/bison or similar utilities. My first approch was to try to use POSIX C regcomp/regexec or Boost implementation of C++ std::regex. I wrote the following regular expression, which does not work (I'll explain why further on). "^" "[ ;\t\n]*" "(" // (1) identifier "[a-zA-Z_][a-zA-Z0-9_]*" ")" "[ \t\n]*" "(" // (2) non-marking "\[" "(" // (3) non-marking "[ \t]*" "(" // (4..n-1) argument "[a-zA-Z0-9_]+" ")" "[ \t\n]*" "," ")*" "[ \t\n]*" "(" // (n) last argument "[a-zA-Z0-9_]+" ")" "]" ")?" "[ \t\n]*" ";" Note that the group 1 captures the identifier and groups 4..n-1 are intended to capture arguments except the last, which is captured by group n. When I apply this regex to, say func(arg1, arg2, arg3) the result I get is an array {func, arg2, arg3}. This is wrong because arg1 is not in it! The problem is that in the standard regex libraries, submarkings only capture the last match. In other words, if you have for instance the regex "((a*|b*))*" applied on "babb", the results of the inner match will be bb and all previous captures will have been forgotten. Another thing that annoys me here is that in case of error there is no way to know which character was not recognized as these functions provide very little information about the state of the parser when the input is rejected. So I don't know if I'm missing something here... In this case should I use sscanf or similar instead? Note that I prefer to use C/C++ standard libraries (and maybe boost).

  Read the article

• Change title of UINavigationBar

  - by Lemmy

  I've created a view-based application. I've placed a Navigation Bar on the view and two buttons. I'd like to change the title of the nav bar after pressing the buttons. In IB I've connected the buttons with the corresponding actions. Debugging shows that the actions are getting called but the title of the nav bar is not changed. Kindly help! // // NavBarViewController.h #import <UIKit/UIKit.h> @interface NavBarViewController : UIViewController { } -(IBAction) clickedOne: (id)sender; -(IBAction) clickedTwo: (id)sender; @end // // NavBarViewController.m #import "NavBarViewController.h" @implementation NavBarViewController -(IBAction) clickedOne: (id)sender { self.navigationItem.title = @"1"; } -(IBAction) clickedTwo: (id)sender { self.navigationItem.title = @"2"; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [super dealloc]; } @end

  Read the article

• Is there a standard pattern for scanning a job table executing some actions?

  - by Howiecamp

  (I realize that my title is poor. If after reading the question you have an improvement in mind, please either edit it or tell me and I'll change it.) I have the relatively common scenario of a job table which has 1 row for some thing that needs to be done. For example, it could be a list of emails to be sent. The table looks something like this: ID Completed TimeCompleted anything else... ---- --------- ------------- ---------------- 1 No blabla 2 No blabla 3 Yes 01:04:22 ... I'm looking either for a standard practice/pattern (or code - C#/SQL Server preferred) for periodically "scanning" (I use the term "scanning" very loosely) this table, finding the not-completed items, doing the action and then marking them completed once done successfully. In addition to the basic process for accomplishing the above, I'm considering the following requirements: I'd like some means of "scaling linearly", e.g. running multiple "worker processes" simultaneously or threading or whatever. (Just a specific technical thought - I'm assuming that as a result of this requirement, I need some method of marking an item as "in progress" to avoid attempting the action multiple times.) Each item in the table should only be executed once. Some other thoughts: I'm not particularly concerned with the implementation being done in the database (e.g. in T-SQL or PL/SQL code) vs. some external program code (e.g. a standalone executable or some action triggered by a web page) which is executed against the database Whether the "doing the action" part is done synchronously or asynchronously is not something I'm considering as part of this question.

  Read the article

• Web User Control og Event

  - by Mcoroklo

  I have a web user control, CreateQuestion.ascx, in ASP.NET. I want an event "QuestionAdded" to fire when a specific button is clicked. I don't want to send any data, I just want to know WHEN the button is fired. My implementation: CreateQuestion.ascx: public event EventHandler QuestionAdded; protected virtual void OnQuestionAdded(EventArgs e) { if (QuestionAdded != null) QuestionAdded(this, e); } /// This is the button I want to know when is fired protected void SubmitButton_Click(object sender, EventArgs e) { //question.Save(); this.OnQuestionAdded(new EventArgs()); } On the page AnswerQuestion.aspx, I use this: private void SetupControls(int myId) { CreateQuestionControl.QuestionAdded += new EventHandler(QuestionAdded); } private void QuestionAdded(object sender, EventArgs e) { Response.Write("HEJ KARL?"); } My problem No matter what, the event is never fired. I know that both SetupControls() is being run, and the code behind the button which should fire the event is run. When I debug, I can see the event QuestionAdded always are null. How do I make this work? Thanks a lot

  Read the article

• java.sql.SQLException: Parameter index out of range (3 > number of parameters, which is 2)

  - by sam

  @WebMethod(operationName = "SearchOR") public SearchOR getSearchOR (@WebParam(name = "comp") String comp, @WebParam(name = "name") String name) { //TODO write your implementation code here: SearchOR ack = null; try{ String simpleProc = "{ call getuser_info_or(?,?)}"; CallableStatement cs = con.prepareCall(simpleProc); cs.setString(1, comp); cs.setString(2, name); ResultSet rs = cs.executeQuery(); System.out.print("2"); /* int i = 0, j = 0; if (rs.last()) { i = rs.getRow(); ack = new SearchOR[i]; rs.beforeFirst(); }*/ while (rs.next()) { // ack[j] = new SearchOR(rs.getString(1), rs.getString(2)); // j++; ve.add(rs.getString(1)); ve.add(rs.getString(2)); }}catch ( Exception e) { e.printStackTrace(); System.out.print(e); } return ack; } I am getting error at portion i have made bold.It is pointing to that location.My Query is here: DELIMITER $$ DROP PROCEDURE IF EXISTS discoverdb.getuser_info_or$$ MySQL returned an empty result set (i.e. zero rows). CREATE PROCEDURE discoverdb.getuser_info_or ( IN comp VARCHAR(100), IN name VARCHAR(100), OUT Login VARCHAR(100), OUT email VARCHAR(100) ) BEGIN SELECT sLogin, sEmail INTO Login, email FROM ad_user WHERE company = comp OR sName=name; END $$ MySQL returned an empty result set (i.e. zero rows). DELIMITER ;

  Read the article

• (nested) user controls within a mvp pattern causing sporadic problems

  - by LLEA

  hi everyone, I have a serious problem with nested user controls (UCs) in WinForms while trying to implement the mvp pattern (passive view). The project consists of one model (designed as a singleton) and a set of different presenters with corresponding view interfaces. To avoid one huge view interface and therefore an overloaded main UI, I decided to make use of a set of different UCs. Each UC has one view interface and one presenter that can access the model. But there are nested UCs: meaning that one specialised UC implements sort of a basic UC. The main UI just represents a container for all those UCs. So far, so good (if not, please ask)?! There are two problems that I am facing now (but I guess both are of the same origin): From time to time it is not possible anymore to load the UCs and test them within the Visual Studio 2008 User Control Test Container. The error message just says that a project with an output type of class library cannot be started directly etc. I can "handle" that by unloading all UC projects and reloading them afterwards. (I guess the references to all mvp components and other UCs are then updated). Assuming that the implementation of my mvp pattern is okay and all those UCs are testable within the VS Test Container at a certain time - there is the biggest problem still left: I am not able to add any UC (even the basic and unnested ones) to a simple Form (UI). The error message: error message.jpg Could it be that my basic UC causes all these Problems?! It consists of two simple ComboBoxes and implements a basic presenter and basic view interface. Whenever I add this UC to a different UC the VS designer adds two references to the public getter methods of the UC as resources. I then manually remove those resources from the resx-file and commend the corresponding lines in the designer file. thx in advance

  Read the article

• Which plugin framework to use for native C++/Win32

  - by Kerido

  Hi everybody. I have an extensible product that allows 3rd party developers to extend it. The aspects that can be extended are documented and interfaces are provided in the SDK. Currently, I'm using COM and I'm getting pretty comfortable with it. I especially like the ability to provide interface versioning in a unified manner. I consider it to be a requirement because you never know what you're gonna need in the future. Just to be precise, here's an example. Let's suppose I have an interface representing a particular feature: class IFeature { public: virtual void DoFeatureTask() = 0; }; Then after the interface is already documented (and someone may have used it in the plugin code) I'm realizing, I need more from this feature. Maybe, there is an option I need to provide. I just define the second version: class IFeature2 { public: virtual void DoFeatureTask(int theOption) = 0; }; I don't mean I intend to have lots of versions. But it just may happen. In COM, because every interface is associated with a GUID, I can query a preferred implementation, determine its presence, and, finally, fall back to a legacy one. But after glancing through C++/COM-related questions, I noticed many recommendations against COM. So maybe it's not the best choice and I'm just too old-school. Can you advise on an alternative?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >