Search Results

Search found 25093 results on 1004 pages for 'console output'.

Page 264/1004 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

• Linux WD30EZRX WD Green HDD & Blacx Duet 5G Usb

  - by Adam

  I have connected up an WD30EZRX WD Green HDD to a Thermaltake Blacx Duet 5G USB dock in Ubuntu 12.04. Every thing seems fine except when the HDD idles it seems to have error ls: reading directory .: Input/output error after a while and is only fixed by unmounting and remounting the drive as root. I have the following line in /etc/fstab UUID=AAF670E9F670B6E3 /media/3TB ntfs defaults,user,auto 0 0 I have noticed that it seems to go between /dev/sdc2 and /dev/sdd2 devices on remount. I did copy 1TB last night without issue in 1 sitting. But after x mins of idle it has remount issue. Any tips/suggestions on how to proceed would be appreciated. Spent most of the night googling and all its done is made me sad. Edit (tried as suggested): root@mediaserver:/media/3TB# sudo hdparm -B 255 -S 253 /dev/sdd2 /dev/sdd2: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error setting standby to 253 (vendor-specific) APM_level = not supported Seems as if that didn't help with this particular drive.

  Read the article

• LXDE Interactive password change

  - by Edgar Lina

  I wanted to know if its possible that LXDE ask for a new password at login time when the password has expired. I can see that it works at console login it ask me for a password change, however, on graphic mode (LXDE) it just returns to login screen after entered my user and password and never asks me for a password chage. Let me know if its possible to do so. I am ussing Lubuntu. Thanks in advance to all.

  Read the article

• Linear Search in Python? [closed]

  - by POTUS

  def find_interval(mesh,x): '''This function finds the interval containing x according to the following rules, mesh is an ordered list with n numbers return 0 if x < mesh[0] return n if mesh[n-1] < x return k if mesh[k-1] <= x < mesh[k] return n-1 if mesh[n-2] <= x <= mesh[n-1] This function does a Linear search. 08/29/2012 ''' for n in range(len(mesh)): for k in range(len(mesh)): if x == mesh[n]: print "Found x at index:" return n elif x<mesh[n]: return 0 elif mesh[n-1]<x: return n elif mesh[n-2]<=x<=mesh[n-1]: return n-1 elif mesh[k-1]<=x<mesh[k]: return k mesh = [0, 0.1, 0.25, 0.5, 0.6, 0.75, 0.9, 1] print mesh print find_interval(mesh, -1) print find_interval(mesh, 0) print find_interval(mesh, 0.1) print find_interval(mesh, 0.8) print find_interval(mesh, 0.9) print find_interval(mesh, 1) print find_interval(mesh, 1.01) Output: [0, 0.100000000000000, 0.250000000000000, 0.500000000000000, 0.600000000000000, 0.750000000000000, 0.900000000000000, 1] 0 Found x at index: 0 2 6 -1 -1 0 I don't think the output is correct. Can anyone help me fix it? Thanks.

  Read the article

• How to install pecl uploadprogress on Debian Lenny

  - by kidrobot

  I am getting this output/error for # pecl install uploadprogress downloading uploadprogress-1.0.1.tgz ... Starting to download uploadprogress-1.0.1.tgz (8,536 bytes) .....done: 8,536 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 building in /var/tmp/pear-build-root/uploadprogress-1.0.1 running: /tmp/pear/temp/uploadprogress/configure checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. ERROR: `/tmp/pear/temp/uploadprogress/configure' failed php-pear is installed. I'm stumped.

  Read the article

• Alternate method to dependent, nested if statements to check multiple states

  - by octopusgrabbus

  Is there an easier way to process multiple true/false states than using nested if statements? I think there is, and it would be to create a sequence of states, and then use a function like when to determine if all states were true, and drop out if not. I am asking the question to make sure there is not a preferred Clojure way to do this. Here is the background of my problem: I have an application that depends on quite a few input files. The application depends on .csv data reports; column headers for each report (.csv files also), so each sequence in the sequence of sequences can be zipped together with its columns for the purposes of creating a smaller sequence; and column files for output data. I use the following functions to find out if a file is present: (defn kind [filename] (let [f (File. filename)] (cond (.isFile f) "file" (.isDirectory f) "directory" (.exists f) "other" :else "(cannot be found)" ))) (defn look-for [filename expected-type] (let [find-status (kind-stat filename expected-type)] find-status)) And here are the first few lines of a multiple if which looks ugly and is hard to maintain: (defn extract-re-values "Plain old-fashioned sub-routine to process real-estate values / 3rd Q re bills extract." [opts] (if (= (utl/look-for (:ifm1 opts) "f") 0) ; got re columns? (if (= (utl/look-for (:ifn1 opts) "f") 0) ; got re data? (if (= (utl/look-for (:ifm3 opts) "f") 0) ; got re values output columns? (if (= (utl/look-for (:ifm4 opts) "f") 0) ; got re_mixed_use_ratio columns? (let [re-in-col-nams (first (utl/fetch-csv-data (:ifm1 opts))) re-in-data (utl/fetch-csv-data (:ifn1 opts)) re-val-cols-out (first (utl/fetch-csv-data (:ifm3 opts))) mu-val-cols-out (first (utl/fetch-csv-data (:ifm4 opts))) chk-results (utl/chk-seq-len re-in-col-nams (first re-in-data) re-rec-count)] I am not looking for a discussion of the best way, but what is in Clojure that facilitates solving a problem like this.

  Read the article

• Implementing Cluster Continuous Replication, Part 3

  Cluster continuous replication (CCR) uses log shipping and failover to provide a more resilient email system with faster recovery. Once it is installed, a clustered server requires different management routines. These are done either with a GUI tool, The Failover Cluster Management Console, or the Exchange Management Shell. You can use Powershell as well for some tasks. Confused? Not for long, since Brien Posey is once more here to help.

  Read the article

• What's wrong with my ext4 partition?

  - by bumbling fool

  What is wrong with this picture? Top is output from "df -h", bottom is gparted. I suspect I'm missing a lot of free space. No problems other than that (yet). Can somebody suggest the best (non-destructive) way to correct this? sudo dumpe2fs -h /dev/sda3: (source http://pastebin.com/nAvrdT4E) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 9f6eff64-60d7-4eec-81d5-1e8acd818b38 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 1602496 Block count: 6406144 Reserved block count: 320306 Free blocks: 4842284 Free inodes: 1361222 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 1022 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8176 Inode blocks per group: 511 RAID stride: 32692 Flex block group size: 16 Filesystem created: Sun Nov 8 18:18:13 2009 Last mount time: Tue Mar 1 01:04:27 2011 Last write time: Mon Feb 28 04:27:34 2011 Mount count: 16 Maximum mount count: 28 Last checked: Thu Feb 24 06:23:39 2011 Check interval: 15552000 (6 months) Next check after: Tue Aug 23 07:23:39 2011 Lifetime writes: 227 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 268015 Default directory hash: half_md4 Directory Hash Seed: cc101517-e617-482b-a883-a72919419c84 Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x001d3000 Journal start: 7787 fdisk and parted output per requests: http://pastebin.com/EGVH7Ken

  Read the article

• Laptop battery life drastically decreased compared to Windows 7

  - by Aron Rotteveel

  I am running Ubuntu 10.10 on my Dell Studio XPS 1640 and have about one hour of battery life in it, compared to about 2.5 hours running on Windows 7. This is with wireless and bluetooth on, but still, the difference seems incredible. What could be causing such a difference and is there a way to close the gap without losing core functionality? EDIT: here's some output from powertop. This is with bluetooth turned off and Wifi turned on. The output seems pretty normal to me, but as indicated, this is about 1 hour of battery life on a full battery... Wakeups-from-idle per second : 476.2 interval: 10.0s Power usage (ACPI estimate): 2.5W (1.2 hours) Top causes for wakeups: 30.0% (167.2)D chrome 21.0% (117.3) [extra timer interrupt] 13.9% ( 77.4) [kernel scheduler] Load balancing tick 3.4% ( 18.9)D xchat 7.1% ( 39.8) [iwlagn] <interrupt> 5.9% ( 32.9) AptanaStudio3 3.9% ( 21.6)D java 2.7% ( 14.9) [TLB shootdowns] <kernel IPI> 2.5% ( 14.1) docky 1.8% ( 10.0) nautilus 1.6% ( 9.0) thunderbird-bin 1.0% ( 5.5) [ahci] <interrupt> 0.9% ( 5.0) syndaemon 0.8% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer) EDIT: after changing /proc/sys/vm/laptop_mode to 5 (it was set to 0), wakeups seem to have decreased, although usage still seems far too high: Wakeups-from-idle per second : 263.8 interval: 10.0s Power usage (ACPI estimate): 2.6W (0.9 hours) EDIT: I seem to have discovered the main cause: I was using the open source ATI Drivers. I recently installed the official ATI drivers and laptop battery life seems to have doubled since. EDIT: last edit. The previous 'solution' of installing the official ATI drivers turns out to be a non-solution. Although it does increase battery life, my laptop resolution is maxed out at 1200x800 after a reboot. (Please note that this problem does not need answering in this question as it is a seperate case)

  Read the article

• Website cookie scanner

  - by user359650

  I'm in charge of a relatively big corporate website (circa 95K pages) and need to perform a cookie audit. I can see cookies issued on a per-page basis with Chrome or Firefox console, but given the amount of pages I need a tool to automate the process. I tried to google for website cookie scanner but my search was unfruitful and found: either online tools which only scan the home page paid services (ex1, ex2) Does any of you know about a tool to scan an entire website and generate a report showing which cookies are being used and which page set them?

  Read the article

• Ubuntu Software Centre Issue (unity 11.10) after broken sun-java6-jre package installation

  - by Stephen Myall

  I have been installing software packages from USC and I am getting the following error message. Worked fine one minute then the message below. Tried to search but couldn't find a solution Previously I was installing the sun-java6-jre package in terminal and had an connection outage and it didnt complete. I attempted an apt-get -f install with no success. i dont know what to try next. I'm relatively new to Linux. The answer provided with a similar question on this site didnt resolve the issue for meClick on this link An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Details File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the sun-java6-jre package. This might mean you need to manually fix this package. Terminal Output Link http://dl.dropbox.com/u/48466855/Terminal%20output.odt

  Read the article

• Connect to bluetooth device from command line

  - by Ilari Kajaste

  Background: I'm using my bluetooth headset as audio output. I managed to get it working by the long list of instructions on BluetoothHeadset community documentation, and I have automated the process of activating the headset as default audio output into a script, thanks to another question. However, since I use the bluetooth headset with both my phone and computer (and the headset doesn't support two input connections) in order for the phone not to "steal" the connection when handset is turned on, I force the headset into a discovery mode when connecting to the computer (phone gets to connect to it automatically). So even though the headset is paired ok and would in "normal" scenario autoconnect, I have to always use the little bluetooth icon in the notification area to actually connect to my device (see screenshot). What I want to avoid: This GUI for connecting to a known and paired bluetooth device: What I want instead: I'd want to make the bluetooth do exactly what the clicking the connect item in the GUI does, only by using command line. I want to use command line so I can make a single keypress shortcut for the action, and would't need to navigate the GUI every time I want to establish a connection to the device. The question: How can I attempt to connect to a specific, known and paired bluetooth device from command line? Further question: How do I tell if the connection was successful or not?

  Read the article

• Design pattern for an automated mechanical test bench

  - by JJS

  Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

  Read the article

• Creating Ubuntu Live CD with customized Unity launcher

  - by toros

  I would like to create a custom Ubuntu image based on Natty using Ubuntu Customization Kit. I also want to customize the icons appearing on the Unity Launcher. I can change the icons on my desktop system with the following command: gsettings set com.canonical.Unity.Launcher favorites "['firefox.desktop', 'nautilus-home.desktop', 'libreoffice-writer.desktop']" I tried to run this command from the UCK console while creating the Live CD, but it doesn’t seem to work. Do you have any ideas how I could solve this?

  Read the article

• Change sysout logging level for Weblogic

  - by Justin Voss

  When I run a local copy of Weblogic, I like to see the output in the console so that I can observe my app's logging messages. But, Weblogic spits out a lot of log messages I don't care about, like these: [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. Can I configure Weblogic to not output those? I assume that I can change the logging level to something higher than INFO and that should fix it?

  Read the article

• Replacing files in a folder structure with files from an unsorted folder

  - by Andrew

  I have over 50,000 PDFs organized into folders in a file called PDFACT. I needed to compress these files so I ran them through Adobe to batch compress them and this worked—except Adobe could only output the files without their folder structure. So basically I have 50,000 PDFs set up in a folder with hundreds of subfolders, and everything was organized. I ended up with one folder with 50,000 compressed PDFs in it, just in alphabetical order. Somehow I need to replace all the orginal PDFs with their compressed copies. Let me give an example: In the folder PDFACT we have the following file: C:\PDFACT\BIG DINNER\BILL\NEWESTBILL.PDF … and in the output folder that Adobe created we have just: C:\COMPRESSED_PDF_FOLDER\NEWESTBILL.PDF This copy is smaller then the one in PDFACT and has the same name but it is just lumped in with every other PDF. The folder structure and subfolders are gone. Is there any way to replace all the larger uncompressed PDFS inside the orginal folder structure with their now compressed counterparts?

  Read the article

• Alienware M17x R3: Possible downclock

  - by Ywen

  I installed recently Kubuntu 11.10 32 bits (had graphics driver issues, wanted to try on 32 bits version) on my new Alienware M17x, with a Core i7-2670QM CPU. Cores are supposed to be clocked at 2.2 GHz, however the output of $ cat /proc/cpuinfo | grep -i "hz" gives me: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 If useful, the AC adapter is plugged in (yet the ouput is the same when the computer is powered only by the battery) and I have Firefox and Eclipse running. Does /proc/cpuinfo reflect a possible automatic downclock made to save power if processor load is low or is this output abnormal? EDIT: Ok, I checked and yes, the ouput does vary in function of the load. I reach 2.2 GHz when needed. But my following problem remains. I was checking my CPU clocking because I experienced poor performances when reading 720p video files on Ubuntu with VLC or mplayer when on battery (and I believe VLC by default only uses CPU, not GPU to decode), whereas I haven't got such problems with VLC on Windows (which made me think it wasn't coming from a BIOS option, plus every option in the BIOS regarding the CPU is turned ON).

  Read the article

• PSAD Firewall/ UDP flood?

  - by Asad Moeen

  Well I'm actually trying to block a UDP Flood on the Application port because the string "getstatus" is causing my application to make large output due to a small input to the attacker's IP. I installed PSAD firewall to do the job. psad -S shows 3000,000 logged packets at the application port and top ports in Scan but does not block the IP of the attacker however other IP Addresses with small number of connections are dropped. I'm thinking that since output is also being made to the attacker, this is why its not getting blocked because iptables rate-limiting is also exactly doing the same thing and not blocking the IP where outgoing connection is also made. Any guesses why it won't work?

  Read the article

• Why does ganglia think my host is down?

  - by NZKoz

  I have ganglia set up to monitor our staging server, it's working great but I'm confused by the definition of 'down' to ganglia. There's a single node, running gmetad, gmond and the web frontend, but some small percentage of the time the web frontend shows some confusing output. Despite the fact that it's a single server in the cluster, and that server is the one serving the web interface, the dashboard output insists that the host is down. Then below that it has a graph which shows 50% down, 50% up. You can see an example of this here: http://i.imgur.com/MCWaS.jpg There's obviously something confusing ganglia somewhere, but I'm not sure where to start looking. Unfortunately googling for any combination of 'ganglia' 'down' 'metric name' seems return nothing but other people's ganglia installations displaying the same nonsense. Any tips on where to start looking would be greatly appreciated

  Read the article

• How to get Messages Pending Count from a Queue using WLST?

  - by lmestre

  WLST is a scripting Language that helps to achieve similar functionality as the ones you have in WebLogic console, but in a command line fashion.You can develop your WLST Scripts using Eclipse OEPE, read more here:https://blogs.oracle.com/oepe/entry/new_oracle_enterprise_pack_forFinally, here is an example to get Messages Pending Count using WLST: . ./setDomainEnv.sh java weblogic.WLST connect('weblogic','welcome1','t3://localhost:7001') domainRuntime() jms= getMBean ('ServerRuntimes/MyManagedServer/JMSRuntime/MyManagedServer.jms/JMSServers/MyJMSServer/Destinations/MyModule!MyQueue') jms.getMessagesPendingCount() Enjoy!WLST documentation:http://docs.oracle.com/middleware/1212/wls/WLSTG/index.html

  Read the article

• RDA and Fusion Middleware Diagnostic Framework Integration

  - by Daniel Mortimer

  Further to my last blog entry "FMw Diagnostic Framework : Automatic Capture of Diagnostic Data Upon First Failure!" I have spent some time exploring how Remote Diagnostic Agent (RDA) integrates with Diagnostic Framework. Remote Diagnostic Agent, by default, collects the information about the last 10 incidents which have been captured in the Automatic Diagnostic Repository (ADR). This information can be located via RDA's Start Page Menu system. See screenshot below. Screenshot - Viewing Diagnostic Framework Incident Information in a RDA Package Note: In the next release of RDA - version 4.30 - the Diagnostic Repository menu label will have it's own position in the weblogic managed server sub menu hierarchy rather than be a child menu item of the logs menuDiagnostic Framework is also capable of launching RDA engine and including the output in an incident package. This is achieved via the command "IPS GENERATE PACKAGE". The RDA output is written to DOMAIN_HOME/servers/<server name>/adr/diag/ofm/<domain name>/<server name>/incpkg/pkg_[number]/seq_[number]/rda The RDA collected files are best viewed (as shown in the screenshot above) by opening the RDA Start Page - "DFW__start.htm" - from this directory in a browser. If you do not have a browser available on the host machine, zip the contents of the rda directory and transfer and extract to a machine which has a browser.  The explanation of the integration goes a little deeper. If you want to know more, read My Oracle Support document: Understanding RDA and FMW 11g Diagnostic Framework Integration [Document 1503644.1]

  Read the article

• How to connect two ubuntu computers with ethernet cable

  - by Lukasz Zaroda

  I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

  Read the article

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

• Setting font size of Closed Captions on iPhone using ffmpeg or mencoder

  - by forthrin

  Does anyone know how to either: Make ffmpeg set subtitle font size in the output video file Make mencoder produce an iPhone-compatible video file (with subtitles) I finally found out how to get Closed Captions video on iPhone, with mkv and srt files as source material. The secret was using the mov_text subtitle codec in ffmpeg (and turning on Closed Captions in the iPhone settings of course): ffmpeg -y -i in.mkv -i in.srt -map 0:0 -map 0:1 -map 1:0 -vcodec copy -acodec aac -ab 256k -scodec mov_text -strict -2 -metadata title="Title" -metadata:s:s:0 language=eng out.mp4 However, the font size appears very small on the iPhone, and I can't find out how to set it with ffmpeg (the iPhone has no option for this). I found out that mencoder has a -subfont-text-scale option, but I don't have a lot of experience with this program. The following, my best attempt so far, produces an output file which is not playable on the iPhone. sudo port install mplayer +mencoder_extras +osd mencoder in.mkv -sub in.srt -o out.mp4 -ovc copy -oac faac -faacopts br=256:mpeg=4:object=2 -channels 2 -srate 48000 -subfont-text-scale 10 -of lavf -lavfopts format=mp4 PS! As requested, here is the output from mencoder: 192 audio & 400 video codecs success: format: 0 data: 0x0 - 0xb64b9d2f libavformat version 54.6.101 (internal) libavformat file format detected. [matroska,webm @ 0x1015c9a50]Unknown entry 0x80 [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (ac3), -aid 0, -alang eng VIDEO: [H264] 1280x544 0bpp 49.894 fps 0.0 kbps ( 0.0 kbyte/s) [V] filefmt:44 fourcc:0x34363248 size:1280x544 fps:49.894 ftime:=0.0200 ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.23.100 (internal) AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000) Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3) ========================================================================== ** MUXER_LAVF ***************************************************************** REMEMBER: MEncoder's libavformat muxing is presently broken and can generate INCORRECT files in the presence of B-frames. Moreover, due to bugs MPlayer will play these INCORRECT files as if nothing were wrong! ******************************************************************************* OK, exit. videocodec: framecopy (1280x544 0bpp fourcc=34363248) VIDEO CODEC ID: 28 AUDIO CODEC ID: 15002, TAG: 0 Writing header... [mp4 @ 0x1015c9a50]Codec for stream 0 does not use global headers but container format requires global headers [mp4 @ 0x1015c9a50]Codec for stream 1 does not use global headers but container format requires global headers Then the following repeats itself for every frame: Pos: 0.0s 1f ( 2%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0] [mp4 @ 0x1015c9a50]malformated aac bitstream, use -absf aac_adtstoasc Error while writing frame. I recognize -absf aac_adtstoasc as an ffmpeg option (does mencoder spawn ffmpeg?), but I don't know how to pass this option on (my hunch is this is not even the origin of the problem).

  Read the article

• Subterranean IL: Exception handling 1

  - by Simon Cooper

  Today, I'll be starting a look at the Structured Exception Handling mechanism within the CLR. Exception handling is quite a complicated business, and, as a result, the rules governing exception handling clauses in IL are quite strict; you need to be careful when writing exception clauses in IL. Exception handlers Exception handlers are specified using a .try clause within a method definition. .try <TryStartLabel> to <TryEndLabel> <HandlerType> handler <HandlerStartLabel> to <HandlerEndLabel> As an example, a basic try/catch block would be specified like so: TryBlockStart: // ... leave.s CatchBlockEndTryBlockEnd:CatchBlockStart: // at the start of a catch block, the exception thrown is on the stack callvirt instance string [mscorlib]System.Object::ToString() call void [mscorlib]System.Console::WriteLine(string) leave.s CatchBlockEnd CatchBlockEnd: // method code continues... .try TryBlockStart to TryBlockEnd catch [mscorlib]System.Exception handler CatchBlockStart to CatchBlockEnd There are four different types of handler that can be specified: catch <TypeToken> This is the standard exception catch clause; you specify the object type that you want to catch (for example, [mscorlib]System.ArgumentException). Any object can be thrown as an exception, although Microsoft recommend that only classes derived from System.Exception are thrown as exceptions. filter <FilterLabel> A filter block allows you to provide custom logic to determine if a handler block should be run. This functionality is exposed in VB, but not in C#. finally A finally block executes when the try block exits, regardless of whether an exception was thrown or not. fault This is similar to a finally block, but a fault block executes only if an exception was thrown. This is not exposed in VB or C#. You can specify multiple catch or filter handling blocks in each .try, but fault and finally handlers must have their own .try clause. We'll look into why this is in later posts. Scoped exception handlers The .try syntax is quite tricky to use; it requires multiple labels, and you've got to be careful to keep separate the different exception handling sections. However, starting from .NET 2, IL allows you to use scope blocks to specify exception handlers instead. Using this syntax, the example above can be written like so: .try { // ... leave.s EndSEH}catch [mscorlib]System.Exception { callvirt instance string [mscorlib]System.Object::ToString() call void [mscorlib]System.Console::WriteLine(string) leave.s EndSEH}EndSEH:// method code continues... As you can see, this is much easier to write (and read!) than a stand-alone .try clause. Next time, I'll be looking at some of the restrictions imposed by SEH on control flow, and how the C# compiler generated exception handling clauses.

  Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >