Search Results

Search found 36369 results on 1455 pages for 'document write'.

Page 298/1455 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

  • MVP Summit 2011 summary and thoughts: The &ldquo;I hope I don&rsquo;t cross a line and lose my MVP status&rdquo; post

    - by George Clingerman
    I've been wanting to write this post summarizing my thoughts about the MVP summit but have been dragging my feet since it's a very difficult one to write. However seeing Andy (http://forums.create.msdn.com/forums/t/77625.aspx) and Catalin (http://www.catalinzima.com/2011/03/mvp-summit-2011/) and Chris (http://geekswithblogs.net/cwilliams/archive/2011/03/07/144229.aspx) post about it has encouraged me to finally take the plunge. I'm going to have to write carefully though because I'm going to be dancing around a ton of NDA mine fields as well as having to walk the tight-rope of not sending the wrong message or having people read too much into what I'm saying. I want to note that most of what I'm about to say is just based on my observations, they're not thoughts that Microsoft has asked me to pass along and they're not things I heard Microsoft say. It's just me sharing what I think after going to the MVP summit. Let's start off with a short imaginary question and answer session.     Has the App Hub forums and XBLIG management been rather poor by Microsoft? Yes.     Do I think we're going to see changes to that overnight? No.     Will it continue to look bad from the outside? Somewhat. Confusing right? Well that's kind of how things are right now. Lots of confusion. XNA is doing AWESOME. Like, really, really awesome. As a result of that awesomeness, XNA is on three major platforms: Xbox 360, WP7 and PC. This means that internally Microsoft is really excited and invested in the technology. That's fantastic for XNA and really should show you the future the framework has. It's here to stay. So why are Xbox LIVE Indie Game developers feeling so much pain? The ironic thing is that pain is being caused by the success of XNA. When XNA was just a small thing, there was more freedom and more focus. It was just us and them. We were an only child. Now our family has grown and everyone has and wants some time with XNA. This gets XNA pulled in all directions and as it moves onto new platforms, it plays catch up trying to get those platforms up to speed to where Xbox LIVE Indie Games has grown. Forums, documentation, educational content. They all need to be there because Xbox LIVE Indie Games has all of that and more. Along with the catch up in features/documentation/awesomeness there's the catch up that the people on the team have to play. New platforms and new areas of development mean new players and those new guys don't have the history of being around from the beginning. This leads to a lack of understanding at times just how important some things are because they seem so small and insignificant (Rich Text defaulting for new forum profiles would be one things that jumps to mind). If you're not aware that the forums have become more than just a basic Q&A, if you're not aware that they're a central hub to a very active community, then you don't understand why that small change should be prioritized over something else. New people have to get caught up and figure out how to make a framework and central forum site work for everyone it's now serving. So yeah, a lot of our pain this last year has been simply that XNA is doing well and XBLIG is doing well so the focus was shifted to catch other things up. It hurts when a parent seems to not have any time for you and they're spending some much time with your new baby brother. Growing pains. All families and in our case our product family experience it to some degree. I think as WP7 matures we'll see the team figuring out how to give everyone the right amount of attention. While we're talking about some of our growing pains, it is also important to note (although not really an excuse) that the Xbox LIVE Arcade developers complain about many of the same things that we do. If you paid attention to talks and information coming out of GDC 2011, most of the the XBLA guys were saying things that sounded eerily similar to what the XBLIG developers are saying (Scott Nichols from GayGamer.net noticed http://twitter.com/#!/NaviFairyGG/status/43540379206811650). Does this mean we should just accept the status quo since we're being treated exactly the same? No way. However it DOES show that the way we're being treated is no indication of the stability and future of the platform, it's just Microsoft dropping the communication ball on two playing fields. We're not alone and we're not even being treated worse. Not great, but also in a weird way a very good sign. Now on to a few tidbits I think I CAN share from the summit (I'm really crossing my fingers I'm not stepping over some NDA line I shouldn't be). First, I discovered that the XBLIG user base is bigger than I personally had originally estimated. I won't give the exact numbers (although we did beg Microsoft to release some of these numbers so maybe someday?) but it was much larger than my original guestimates and I was pleasantly surprised. Maybe some of you guys had the right number when you were guessing, but I know that mine was much too low. And even MORE importantly the number of users/shoppers is growing at a steady pace as well. Our market is growing! That was fantastic news and really something that I had to share. On to the community manager discussion. It was mentioned. I was mentioned. I blushed. Nothing more to report there than the blush in my cheeks was a light crimson color. If I ever see a job description posted for that position I have a resume waiting in the wings. I can't deny that I think that would be my dream job... ...so after I finished blushing, the MVPs did make it very, very clear that the communication has to improve. Community manager or not the single biggest pain point with the Xbox LIVE Indie Game community has been a lack of communication. I have seen dramatic improvement in the team responding to MVPs and I'm even seeing more communication from them on the forums so I'm hoping that's a long term change. I really think they understood the issue, the problem remains how to open that communication channel in a way that was sustainable. I think they'll get it figured out and hopefully that's sooner rather than later. During the summit, you may have seen me tweeting about how I was "that guy" (http://twitter.com/#!/clingermangw/status/42740432471470081). You also may have noticed that Andy and Catalin both mentioned me in their summit write ups. I may have come on a bit strong while I was there...went a little out of character for myself. I've been agitated for a while with the way things have been and I've been listening to you guys and hearing you guys be agitated. I'm also watching some really awesome indie game developers looking elsewhere and leaving the platform. Some of them we might not have been able to keep even with changes, but others are only leaving because of perceptions and lack of communication from Microsoft. And that pisses me off. And I let Microsoft know that I was pissed off. You made your list and I took that list and verbalized it. I verbalized the hell out of it. [It was actually mentioned that I'm a lot nicer on the forums and in email than I am in person...I felt bad about that, but I couldn't stay silent]. Hopefully it did something guys, I really did try hard to get the message across. Along with my agitation, I also brought some pride. I mentioned several things in person to the team that I was particularly proud of. From people in the community that are doing an awesome job, to the re-launch of XboxIndies that was going on that week and even gamers like Steven Hurdle (http://writingsofmassdeduction.com/) who have purchased one XBLIG every day for over 100 days now. The community is freaking rocking it and I made sure to highlight that. So in conclusion, I'd just like to say hang in there (you know, like that picture of the cat). If you've been worried about investing in Xbox LIVE Indie Games because you think it's on shaky ground. It's not. Dream Build Play being about the Xbox 360 should have helped a little to point that out. The team is really scrambling around trying to figure things out and make improvements all around. There’s quite a few new gals and guys and it's going to take them time to catch up and there are a lot of constantly shifting priorities. We all have one toy, one team and we're fighting for time with it. It's also time for the community to continue spreading our wings and going out on our own more often. The Indie Game Winter Uprising was a fantastic example of that. We took things into our own hands and it got noticed and Microsoft got behind it. They do every time we stand up and do something (look at how many Microsoft employees tweeted, wrote about the re-launch of XboxIndies.com or the support I've gotten from them for my weekly XNA Notes). XNA is here to stay, it's time for us to stop being scared of that and figure out how to make our own games the successes they should be. There's definitely a list of things that need to be fixed, things that should be improved and I think we should definitely keep vocal about that with Microsoft. Keep it short, focused and prioritized. There's also a lot of things we can do ourselves while we're waiting on them to fix and change things. Lots of ways we can compensate for particular weaknesses in the channel. The kind of stuff that we can step up and do ourselves. Do it on our own, you know, the way Indies always do. And I'm really looking forward to watching us do just that.

    Read the article

  • Envista: Coordinating Utilities with Oracle Spatial 11g

    - by stephen.garth
    It's annoying when the same streets seem to be perpetually dug up for utility construction or maintenance by your water or sewer department, electric utility, gas company or telephone company. Can't they do a better job of coordinating these activities? In this podcast, Marc Fagan, Executive VP of Product Management from Envista describes a Software-as-a-Service solution that Envista provides for utilities and public works departments to coordinate upcoming construction work, using Oracle Database 11g with Oracle Spatial. Each participating utility enters key data into the Web-based application, including when and where their work is to take place, and who to contact for more information. The data is then available on a common base map, enabling all participants to coordinate their activities, save money, and minimize inconvenience to their customers. Listen to the podcast Find out more about Oracle Spatial 11g var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

    Read the article

  • Examples of temporal database designs? [closed]

    - by miku
    I'm researching various database design for historical record keeping - because I would like to implement a prototypical web application that (excessively) tracks changes made by users and let them undo things, see revisions, etc. I'd love use mercurial or git as backend (with files as records) - since they already implement the kind of append-only changes I imagine. I tried git and dulwich (python git API) - and it went ok - but I was concerned about performance; Bi-temporal database design lets you store a row along with time periods, when this record was valid. This sure sound more performant than to operate on files on disk (as in 1.) - but I had little luck finding real-world examples (e.g. from open source projects), that use this kind of design and are approachable enough to learn from them. Revisions à la MediaWiki revisions or an extra table for versions, as in Redmine. The problem here is, that DELETE would take the whole history with it. I looked at NoSQL solutions, too. With a document oriented approach, it would be simple to just store the whole history of an entity within the document itself - which would reduce design plus implementation time in contrast to a RDBMS approach. However, in this case I'm a bit concerned about ACID-properties, which would be important in the application. I'd like ask about experiences about real-world and pragmatic designs for temporal data.

    Read the article

  • SQLAuthority News – Download Whitepaper – Understanding and Controlling Parallel Query Processing in SQL Server

    - by pinaldave
    My recently article SQL SERVER – Reducing CXPACKET Wait Stats for High Transactional Database has received many good comments regarding MAXDOP 1 and MAXDOP 0. I really enjoyed reading the comments as the comments are received from industry leaders and gurus. I was further researching on the subject and I end up on following white paper written by Microsoft. Understanding and Controlling Parallel Query Processing in SQL Server Data warehousing and general reporting applications tend to be CPU intensive because they need to read and process a large number of rows. To facilitate quick data processing for queries that touch a large amount of data, Microsoft SQL Server exploits the power of multiple logical processors to provide parallel query processing operations such as parallel scans. Through extensive testing, we have learned that, for most large queries that are executed in a parallel fashion, SQL Server can deliver linear or nearly linear response time speedup as the number of logical processors increases. However, some queries in high parallelism scenarios perform suboptimally. There are also some parallelism issues that can occur in a multi-user parallel query workload. This white paper describes parallel performance problems you might encounter when you run such queries and workloads, and it explains why these issues occur. In addition, it presents how data warehouse developers can detect these issues, and how they can work around them or mitigate them. To review the document, please download the Understanding and Controlling Parallel Query Processing in SQL Server Word document. Note: Above abstract has been taken from here. The real question is what does the parallel queries has made life of DBA much simpler or is it looked at with potential issue related to degradation of the performance? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, SQLAuthority News, T SQL, Technology

    Read the article

  • ASP.NET MVC Postbacks and HtmlHelper Controls ignoring Model Changes

    - by Rick Strahl
    So here's a binding behavior in ASP.NET MVC that I didn't really get until today: HtmlHelpers controls (like .TextBoxFor() etc.) don't bind to model values on Postback, but rather get their value directly out of the POST buffer from ModelState. Effectively it looks like you can't change the display value of a control via model value updates on a Postback operation. To demonstrate here's an example. I have a small section in a document where I display an editable email address: This is what the form displays on a GET operation and as expected I get the email value displayed in both the textbox and plain value display below, which reflects the value in the mode. I added a plain text value to demonstrate the model value compared to what's rendered in the textbox. The relevant markup is the email address which needs to be manipulated via the model in the Controller code. Here's the Razor markup: <div class="fieldcontainer"> <label> Email: &nbsp; <small>(username and <a href="http://gravatar.com">Gravatar</a> image)</small> </label> <div> @Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield"}) @Model.User.Email </div> </div>   So, I have this form and the user can change their email address. On postback the Post controller code then asks the business layer whether the change is allowed. If it's not I want to reset the email address back to the old value which exists in the database and was previously store. The obvious thing to do would be to modify the model. Here's the Controller logic block that deals with that:// did user change email? if (!string.IsNullOrEmpty(oldEmail) && user.Email != oldEmail) { if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; } else // allow email change but require verification by forcing a login user.IsVerified = false; }… model.user = user; return View(model); The logic is straight forward - if the new email address is not valid because it already exists I don't want to display the new email address the user entered, but rather the old one. To do this I change the value on the model which effectively does this:model.user.Email = oldEmail; return View(model); So when I press the Save button after entering in my new email address ([email protected]) here's what comes back in the rendered view: Notice that the textbox value and the raw displayed model value are different. The TextBox displays the POST value, the raw value displays the actual model value which are different. This means that MVC renders the textbox value from the POST data rather than from the view data when an Http POST is active. Now I don't know about you but this is not the behavior I expected - initially. This behavior effectively means that I cannot modify the contents of the textbox from the Controller code if using HtmlHelpers for binding. Updating the model for display purposes in a POST has in effect - no effect. (Apr. 25, 2012 - edited the post heavily based on comments and more experimentation) What should the behavior be? After getting quite a few comments on this post I quickly realized that the behavior I described above is actually the behavior you'd want in 99% of the binding scenarios. You do want to get the POST values back into your input controls at all times, so that the data displayed on a form for the user matches what they typed. So if an error occurs, the error doesn't mysteriously disappear getting replaced either with a default value or some value that you changed on the model on your own. Makes sense. Still it is a little non-obvious because the way you create the UI elements with MVC, it certainly looks like your are binding to the model value:@Html.TextBoxFor( mod=> mod.User.Email, new {type="email",@class="inputfield",required="required" }) and so unless one understands a little bit about how the model binder works this is easy to trip up. At least it was for me. Even though I'm telling the control which model value to bind to, that model value is only used initially on GET operations. After that ModelState/POST values provide the display value. Workarounds The default behavior should be fine for 99% of binding scenarios. But if you do need fix up values based on your model rather than the default POST values, there are a number of ways that you can work around this. Initially when I ran into this, I couldn't figure out how to set the value using code and so the simplest solution to me was simply to not use the MVC Html Helper for the specific control and explicitly bind the model via HTML markup and @Razor expression: <input type="text" name="User.Email" id="User_Email" value="@Model.User.Email" /> And this produces the right result. This is easy enough to create, but feels a little out of place when using the @Html helpers for everything else. As you can see by the difference in the name and id values, you also are forced to remember the naming conventions that MVC imposes in order for ModelBinding to work properly which is a pain to remember and set manually (name is the same as the property with . syntax, id replaces dots with underlines). Use the ModelState Some of my original confusion came because I didn't understand how the model binder works. The model binder basically maintains ModelState on a postback, which holds a value and binding errors for each of the Post back value submitted on the page that can be mapped to the model. In other words there's one ModelState entry for each bound property of the model. Each ModelState entry contains a value property that holds AttemptedValue and RawValue properties. The AttemptedValue is essentially the POST value retrieved from the form. The RawValue is the value that the model holds. When MVC binds controls like @Html.TextBoxFor() or @Html.TextBox(), it always binds values on a GET operation. On a POST operation however, it'll always used the AttemptedValue to display the control. MVC binds using the ModelState on a POST operation, not the model's value. So, if you want the behavior that I was expecting originally you can actually get it by clearing the ModelState in the controller code:ModelState.Clear(); This clears out all the captured ModelState values, and effectively binds to the model. Note this will produce very similar results - in fact if there are no binding errors you see exactly the same behavior as if binding from ModelState, because the model has been updated from the ModelState already and binding to the updated values most likely produces the same values you would get with POST back values. The big difference though is that any values that couldn't bind - like say putting a string into a numeric field - will now not display back the value the user typed, but the default field value or whatever you changed the model value to. This is the behavior I was actually expecting previously. But - clearing out all values might be a bit heavy handed. You might want to fix up one or two values in a model but rarely would you want the entire model to update from the model. So, you can also clear out individual values on an as needed basis:if (userBus.DoesEmailExist(user.Email)) { userBus.ValidationErrors.Add("New email address exists already. Please…"); user.Email = oldEmail; ModelState.Remove("User.Email"); } This allows you to remove a single value from the ModelState and effectively allows you to replace that value for display from the model. Why? While researching this I came across a post from Microsoft's Brad Wilson who describes the default binding behavior best in a forum post: The reason we use the posted value for editors rather than the model value is that the model may not be able to contain the value that the user typed. Imagine in your "int" editor the user had typed "dog". You want to display an error message which says "dog is not valid", and leave "dog" in the editor field. However, your model is an int: there's no way it can store "dog". So we keep the old value. If you don't want the old values in the editor, clear out the Model State. That's where the old value is stored and pulled from the HTML helpers. There you have it. It's not the most intuitive behavior, but in hindsight this behavior does make some sense even if at first glance it looks like you should be able to update values from the model. The solution of clearing ModelState works and is a reasonable one but you have to know about some of the innards of ModelState and how it actually works to figure that out.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Html Agility Pack for Reading “Real World” HTML

    - by WeigeltRo
    In an ideal world, all data you need from the web would be available via well-designed services. In the real world you sometimes have to scrape the data off a web page. Ugly, dirty – but if you really want that data, you have no choice. Just don’t write (yet another) HTML parser. I stumbled across the Html Agility Pack (HAP) a long time ago, but just now had the need for a robust way to read HTML. A quote from the website: This is an agile HTML parser that builds a read/write DOM and supports plain XPATH or XSLT (you actually don't HAVE to understand XPATH nor XSLT to use it, don't worry...). It is a .NET code library that allows you to parse "out of the web" HTML files. The parser is very tolerant with "real world" malformed HTML. The object model is very similar to what proposes System.Xml, but for HTML documents (or streams). Using the HAP was a simple matter of getting the Nuget package, taking a look at the example and dusting off some of my XPath knowledge from years ago. The documentation on the Codeplex site is non-existing, but if you’ve queried a DOM or used XPath or XSLT before you shouldn’t have problems finding your way around using Intellisense (ReSharper tip: Press Ctrl+Shift+F1 on class members for reading the full doc comments).

    Read the article

  • Z axis in isometric tilemap

    - by gyhgowvi
    I'm experimenting with isometric tile maps in JavaScript and HTML5 Canvas. I'm storing tile map data in JavaScript 2D array. // 0 - Grass // 1 - Dirt // ... var mapData = [ [0, 0, 0, 0, 0], [0, 0, 1, 0, 0, ... ] and draw for(var i = 0; i < mapData.length; i++) { for(var j = 0; j < mapData[i].length; j++) { var p = iso2screen(i, j, 0); // X, Y, Z context.drawImage(tileArray[mapData[i][j]], p.x, p.y); } } but this function mean's all tile Z axis is equal to zero. var p = iso2screen(i, j, 0); Maybe anyone have idea and how to do something like mapData[0][0] Z axis equal to 3 mapData[5][5] Z axis equal to 5? I have idea: Write function for grass, dirt and store this function to 2D array and draw and later mapData[0][0].setZ(3); But it is good idea to write functions for each tiles?

    Read the article

  • Can any web-based email program let user paste an image (not link) as part of the email instead of a

    - by Jian Lin
    I think back in the old days, some email programs let users Paste an image right inside the email content. (maybe WinMail or Outlook?) So for example, we can write some text, embed an image, and then write some more text, and embed another image. The recipient will get the email content in the above text-image-text-image order (instead of having all images attached at the end of email) Can any web-based email program do that? Note that the image is not just a link, but a complete file. For example, Gmail lets us paste an image, but it is actually just a link to some web location. Can the actual file content be embedded instead?

    Read the article

  • SQL SERVER – Difference Between DATETIME and DATETIME2 – WITH GETDATE

    - by pinaldave
    Earlier I wrote blog post SQL SERVER – Difference Between GETDATE and SYSDATETIME which inspired me to write SQL SERVER – Difference Between DATETIME and DATETIME2. Now earlier two blog post inspired me to write this blog post (and 4 emails and 3 reads from readers). I previously populated DATETIME and DATETIME2 field with SYSDATETIME, which gave me very different behavior as SYSDATETIME was rounded up/down for the DATETIME datatype. I just ran the same experiment but instead of populating SYSDATETIME in this script I will be using GETDATE function. DECLARE @Intveral INT SET @Intveral = 10000 CREATE TABLE #TimeTable (FirstDate DATETIME, LastDate DATETIME2) WHILE (@Intveral > 0) BEGIN INSERT #TimeTable (FirstDate, LastDate) VALUES (GETDATE(), GETDATE()) SET @Intveral = @Intveral - 1 END GO SELECT COUNT(DISTINCT FirstDate) D_FirstDate, COUNT(DISTINCT LastDate) D_LastDate FROM #TimeTable GO SELECT DISTINCT a.FirstDate, b.LastDate FROM #TimeTable a INNER JOIN #TimeTable b ON a.FirstDate = b.LastDate GO SELECT * FROM #TimeTable GO DROP TABLE #TimeTable GO Let us run above script and observe the results. You will find that the values of GETDATE which is populated in both the columns FirstDate and LastDate are very much same. This is because GETDATE is of datatype DATETIME and the precision of the GETDATE is smaller than DATETIME2 there is no rounding happening. In other word, this experiment is pointless. I have included this as I got 4 emails and 3 twitter questions on this subject. If your datatype of variable is smaller than column datatype there is no manipulation of data, if data type of variable is larger than column datatype the data is rounded. Reference: Pinal Dave (http://www.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL DateTime, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • I have only two languages on my resume - how bad is this?

    - by Karl
    Hi there! I have a question that can be best answered here, given the vast experience some of you guys have! I am going to finish my bachelor's degree in CS and let's face it, I am just comfortable with C++ and Python. C++ - I have no experience to show for and I can't quote the C++ standard like some of the guys on SO do but yet I am comfortable with the language basics and the stuff that mostly matters. With Python, I have demonstrated work experience with a good company, so I can safely put that. I have never touched C, though I have been meaning to do it now. So I cannot write C on my resume because I have not done it ever. Sure I can finish K & R and get a sense of the language in a month, but I don't feel like writing it cause that would be being unfaithful to myself. So the big question is, are two languages on a a resume considered OK or that is usually a bad sign? Most resumes I have seen mention lots of languages and hence my question. Under the language section of my resume, I just mention: C++ and Python and that kinda looks empty! What are your views on this and what do you feel about such a situation? PS: I really don't want to write every single library or API I am familiar with. Or should I?

    Read the article

  • Uploading documents to WSS (Windows Sharepoint Services) using SSIS

    - by Randy Aldrich Paulo
    Recently I was tasked to create an SSIS application that will query a database, split the results with certain criteria and create CSV file for every result and upload the file to a Sharepoint Document Library site. I've search the web and compiled the steps I've taken to build the solution. Summary: A) Create a proxy class of WSS Copy.asmx. B) Create a wrapper class for the proxy class and add a mechanism to check if the file is existing and delete method. C) Create an SSIS and call the wrapper class to transfer the files.   A) Creating Proxy Class 1) Go to Visual Studio Command Prompt type wsdl http://[sharepoint site]/_vti_bin/Copy.asmx this will generate the proxy class (Copy.cs) that will be added to the solution. 2) Add Copy.cs to solution and create another constructor for Copy() that will accept additional parameters url, userName, password and domain.   public Copy(string url, string userName, string password, string domain) { this.Url = url; this.Credentials = new System.Net.NetworkCredential(userName, password, domain); } 3) Add a namespace.     B) Wrapper Class Create a C# new library that references the Proxy Class.         C) Create SSIS SSIS solution is composed of:   1) Execute SQL Task, returns a single column rows containing the criteria. 2) Foreach Loop Container - loops per result from query (SQL Task) and creates a CSV file on a certain folder. 3) Script Task - calls the wrapper class to upload CSV files located on a certain folder to targer WSS Document Library Note: I've created another overload of CopyFiles that accepts a Directory Info instead of file location that loops thru the contents of the folder. Designer View Variable View

    Read the article

  • Microsoft Word 2007 opening all docs with field codes toggled off

    - by WilliamKF
    Recently, something changed with my Microsoft Word 2007 installation/preferences on Windows XP, such that whenever I open a word document, all the field codes are displayed raw instead of as their expanded value. For example, my header reads: My Name { TITLE \* MERGEFORMAT } Version { REVNUM \* MERGEFORMAT } But, if I copy and paste it here, it reads expanded: My Name My Doc Title Version 42 I expect to see the copy and paste version directly inside Word, I can work around this by right clicking on each such field and choosing toggle field codes, however, I never had to do that before, as previously, the document opened with all such field codes expanded. Another example is the Table of Contents which shows as: { TOC \o "1-3" \h \z \u } Instead of the full table of contents. I searched the word options dialog, but could not find anything that appeared relevant. Please suggest how to restore the old behavior.

    Read the article

  • Learn Domain-Driven Design

    - by Ben Griswold
    I just wrote about how I like to present on unfamiliar topics. With this said, Domain-Driven Design (DDD) is no exception. This is yet another area I knew enough about to be dangerous but I certainly was no expert.  As it turns out, researching this topic wasn’t easy. I could be wrong, but it is as if DDD is a secret to which few are privy. If you search the Interwebs, you will likely find little information about DDD until you start rolling over rocks to find that one great write-up, a handful of podcasts and videos and the Readers’ Digest version of the Blue Book which apparently you must read if you really want to get the complete, unabridged skinny on DDD.  Even Wikipedia’s write-up is skimpy which I didn’t know was possible…   Here’s a list of valuable resources.  If you, too, are interested in DDD, this is a good starting place.  Domain-Driven Design: Tackling Complexity in the Heart of Software by Eric Evans Domain-Driven Design Quickly, by Abel Avram & Floyd Marinescu An Introduction to Domain-Driven Design by David Laribee Talking Domain-Driven Design with David Laribee Part 1, Deep Fried Bytes Talking Domain-Driven Design with David Laribee Part 2, Deep Fried Bytes Eric Evans on Domain Driven Design, .NET Rocks Domain-Driven Design Community Eric Evans on Domain Driven Design Jimmy Nilsson on Domain Driven Design Domain-Driven Design Wikipedia What I’ve Learned About DDD Since the Book, Eric Evans Domain Driven Design, Alt.Net Podcast Applying Domain-Driven Design and Patterns: With Examples in C# and .NET, Jimmy Nilsson Domain-Driven Design Discussion Group DDD: Putting the Model to Work by Eric Evans The Official DDD Site

    Read the article

  • AngularJS in 60-ish Minutes – The eBook

    - by dwahlin
    Back in April of 2013 I published a video titled AngularJS in 60-ish Minutes on YouTube that focused on learning the fundamentals of AngularJS such as data binding, controllers, modules, factories/services and more (watch it by clicking the link above or scroll to the bottom of this post). One of the people that watched the video was Ian Smith (his blog is at http://fastandfluid.blogspot.com). But, Ian did much more than just watch it. He took the time to transcribe the audio into text, added screenshots, and included the time that the topic appears in the original video. Here’s an example of one of the pages: The funny thing about this whole story is that I’m currently working on an AngularJS eBook concept that I plan to publish to Amazon.com that’ll be called AngularJS JumpStart and it’s also based on the video. It follows the same general format and I even paid a transcription company to generate a document for me a few months back. Ian and I have both developed training materials before and it turns out we were both thinking along the same lines which was funny to see when he first showed me what he created. I’m extremely appreciative of Ian for taking the time to transcribe the video (thank him if you use the document) and hope you find it useful! Download the AngularJS in 60-ish Minutes eBook here   AngularJS in 60-ish Minutes Video   If you’re interested in more articles, blog posts, and additional information on AngularJS check out the new The AngularJS Magazine (a Flipboard magazine) that I started:   The AngularJS Magazine

    Read the article

  • CodePlex Daily Summary for Friday, April 30, 2010

    CodePlex Daily Summary for Friday, April 30, 2010New ProjectsAcres2: This is the new hotnessAsoraX.de - AirlineTycoon: EntwicklungsPhase von AsoraX.deazshop: Ecommerce macros and user controls based on Commerce4Umbraco from Umbraco CMS Project.BioPhotoAnalyzer: Some exercises with F#, WPF and Mathematical methods for quantitative analysis of biological photos, such as those obtained from microscopy, PAGE etcCECS622 - Simulations - South Computing Center: This simulation will be used to study the traffic flow of the South Computing Center (SCC) on the UofL campus. Document.Viewer: Basic document viewer for Windows XP, Vista and Windows 7 that supports FlowDocument, Rich and Plan Text FormatsDotNetNuke 5 Thai Language Pack: DotNetNuke Thai Language PackDotNetNuke Skins Pack: We derive html/css template from www.freecsstemplates.org and apply to DotNetNuke 4 & 5 Skins Pack.Dynamics AX Business Intelligence: Sample code for creating and using Dynamics AX Business Intelligence Easy Chat: Very simple kind of chat; it got DOS interface. It's just to start the server start the client enter the IP, enter your name, and you're ready to go!Html Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that wa...HydroServer - CUAHSI Hydrologic Information System Server: HydroServer is a set of software applications for publishing hydrologic datasets on the Internet. HydroServer leverages commercial software such a...Lisp.NET: Lisp.NET is a project that demonstrates how the Embedded Common Lisp (ECL) environment can be loaded and used from .NET. This enables Common Lisp ...Live-Exchange Calendar Sync: Live - Exchange Calendar Sync synchronizes calendars of users between 2 Exchange servers (it can be Live Calendar also). It's developed in C#. It u...MaLoRT : Mac Lovin' RayTracer: RaytracerMojo Workflow Web UI: Mojo Workflow Web UIMoonRover - Enter Island: Simple Graphics consumer application that simulates Moon RoversMVC Music Store: MVC Music Store is a tutorial application built on ASP.NET MVC 2. It's a lightweight sample store which sells albums online, demonstrating ASP.NET ...OpenPOS: OpenPOS, a completely open and free point-of-sale systemPgcDemuxCLI: A modified version of PgcDemux (http://download.videohelp.com/jsoto/dvdtools.htm) that has better CLI support and progress reporting.Sample 01: basic summarySharedEx: App dev in VS2010 RTM and Silverlight 4.0 for Windows Phone 7!SharePoint 2010 Managed Metadata WebPart: This SharePoint 2010 webpart creates a navigation control from a Managed Metadata column assigned to a list/library. The Termset the column relates...SharePoint 2010 Service Manager: The SharePoint Service manager let's you start and stop all the SharePoint 2010 services on your workstation. This is useful if you are running S...Sharp DOM: Sharp DOM is a view engine for ASP.NET MVC platform allowing developers to design extendable and maintenable dynamic HTML layouts using C# 4.0 lang...simple fx: simple framework written in javascriptSimpleGFC.NET: Simple GFC is a .NET library written in C# for simplifying the connection to Google Friend Connect. It is designed to be simple and concise, not a...SPSS & PSPP file library: Library for importing SPSS (now called PASW) & PSPP .sav datafiles, developed in C#. Support for writing and SPSS portable-files will be implemente...TailspinSpyworks - WebForms Sample Application: Tailspin Spyworks demonstrates how extraordinarily simple it is to create powerful, scalable applications for the .NET platform. It shows off how t...VividBed: Business website.卢融凯的个人主页: 卢融凯的个人主页New ReleasesAssemblyVerifier: 4.0.0.0 Release: Updated to target .NET 4.0Bricks' Bane: Bricks' Bane Editor v1.0.0.4: I've added functionality to the editor, after some personal use. Plus I fixed a bug that was occurring on file loading mostly when the file was mod...Dambach Linear Algebra Framework: Linear Algebra Framework - Sneak Peak: This is just to get the code out there into the hands of potential users and to elicit feedback.DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 4a: DevTreks calculators, analyzers, and story tellers are being upgraded so that they can be extended by third parties using either add-ins (Managed ...DirectQ: Release 1.8.3c: Fixes some more late-breaking bugs and adds some optimizations from the forthcoming 1.8.4 release. No Windows 98 build this time. I may add one a...Document Assembly from a SharePoint Library using the Open XML SDK: Solution for March 2010 rel of the Open XML SDK: Microsoft changed some class names between the December 2009 CTP and the March 2010 release of the Open XML SDK which means that old solution will ...Document.Viewer: 0.9.0: Whats New?: New icon set Bug fix'sDotNetNuke Skins Pack: DNN 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DotNetWinService: Release 1.0.0.0: This release includes four different scheduled tasks: 1) TaskURL: Petition a specific URL: when working on a ASP.NET website, it's sometimes ...Hammock for REST: Hammock v1.0.1: v1.0.1 ChangesFixes to improve OAuth stability Fixes for asynchronous timeouts Fixes and simplification for retries v1.0 FeaturesSimple, clean...Home Access Plus+: v4.1.1: v4.1.1 Change Log: Added Enable for Booking Resource to allow Resources to be disabled but not deleted Updated HAP.Config for above File Changes...HouseFly controls: HouseFly controls alpha 0.9.6.0: HouseFly controls release 0.9.6.0 alphaHydroServer - CUAHSI Hydrologic Information System Server: ODM Data Loader 1.1.3: Version 1.1.3 of the ODM Data Loader is only compatible with version 1.1 of ODM This Version Addresses : Memory issues in Version 1.1.2 that were ...Jobping Url Shortener: Source Code v0.1: Source code for the 0.1 release.LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.6: Fixed the crash after accepting the use of internet access.mojoPortal: 2.3.4.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2343-released.aspxMoonRover - Enter Island: Moon Rover: Simulates Rover Moves on MoonNanoPrompt: Release 0.4.1 - Beta 1.1: Now released: Beta 1.1 for .NET 4.0ORAYLIS BI.SmartDiff: Release 1.0.0: see change log for detailsQuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.22: Main FeaturesClean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between s...SharePoint 2010 Managed Metadata WebPart: Taxonomy WebPart 0.0.1: Initial version releasedSharePoint 2010 Service Manager: SharePoint Service Manager 2010 v1: Starts and stops all SharePoint services Works with both Microsoft SQL Server and SQL Server Express Edition (for SharePoint) Supports disablin...Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet RTM Release: Shweet has been updated to work with the RTM of SharePoint and the latest version of Pex Visual Studio 2010 Power Tools. Know issues: Continuous I...Silverlight Testing Automation Tool: StatLight v1.0 - Beta 1: Things still to accomplish (before official v1 release)Item # 10716: Release build hangs on x64 machine Still awaiting UnitDriven change feedback...SPSS & PSPP file library: 0.1 alpha: This first test release allows to read an .sav SPSS/PSPP/PASW file and retreive the data, either in the form of a .net DataReader or as a custom Sp...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.0.0: Initial Public Release Requirements: .NET Framework 2.0 SqlDiffFramework is designed for the enterprise! Check with your system administrator (or...sqwarea: Sqwarea 0.0.210.0 (alpha): First public release. Deploy package contains : the documentation for classes. the azure package with the Web Role. the zip with assemblies wh...Sweeper: Sweeper Alpha 2: SweeperA Visual Studio Add-in for C# Code Formatting - Visual Studio 2008 Includes: A UI for options, Enable or disable any specific task you want ...TailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.8: ASP.NET 4 ECommerce ApplicationTweetSharp: TweetSharp Release Candidate: New FeaturesComplete core rewrite for stability and speed, introducing Hammock http://hammock.codeplex.com Windows Phone 7, Silverlight 4 OOB (El...Wicked Compression ASP.NET HTTP Module: Wicked Compression ASP.NET HTTP Module Beta: Now supports AJAX from .NET Framework 2.0 through 4.0! Bug Fix for Excluded Paths! Binary Release Included for .NET Framework 2.0 through 4.0!Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterHydroServer - CUAHSI Hydrologic Information System ServerGMap.NET - Great Maps for Windows Forms & PresentationParticle Plot Pivotpatterns & practices: Azure Security GuidanceSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleN2 CMS

    Read the article

  • SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28

    - by pinaldave
    Jonathan Kehayias (Blog | Twitter) is a MCITP Database Administrator and Developer, who got started in SQL Server in 2004 as a database developer and report writer in the natural gas industry. After spending two and a half years working in TSQL, in late 2006, he transitioned to the role of SQL Database Administrator. His primary passion is performance tuning, where he frequently rewrites queries for better performance and performs in depth analysis of index implementation and usage. Jonathan blogs regularly on SQLBlog, and was a coauthor of Professional SQL Server 2008 Internals and Troubleshooting. On a personal note, I think Jonathan is extremely positive person. In every conversation with him I have found that he is always eager to help and encourage. Every time he finds something needs to be approved, he has contacted me without hesitation and guided me to improve, change and learn. During all the time, he has not lost his focus to help larger community. I am honored that he has accepted to provide his views on complex subject of Wait Types and Queues. Currently I am reading his series on Extended Events. Here is the guest blog post by Jonathan: SQL Server troubleshooting is all about correlating related pieces of information together to indentify where exactly the root cause of a problem lies. In my daily work as a DBA, I generally get phone calls like, “So and so application is slow, what’s wrong with the SQL Server.” One of the funny things about the letters DBA is that they go so well with Default Blame Acceptor, and I really wish that I knew exactly who the first person was that pointed that out to me, because it really fits at times. A lot of times when I get this call, the problem isn’t related to SQL Server at all, but every now and then in my initial quick checks, something pops up that makes me start looking at things further. The SQL Server is slow, we see a number of tasks waiting on ASYNC_IO_COMPLETION, IO_COMPLETION, or PAGEIOLATCH_* waits in sys.dm_exec_requests and sys.dm_exec_waiting_tasks. These are also some of the highest wait types in sys.dm_os_wait_stats for the server, so it would appear that we have a disk I/O bottleneck on the machine. A quick check of sys.dm_io_virtual_file_stats() and tempdb shows a high write stall rate, while our user databases show high read stall rates on the data files. A quick check of some performance counters and Page Life Expectancy on the server is bouncing up and down in the 50-150 range, the Free Page counter consistently hits zero, and the Free List Stalls/sec counter keeps jumping over 10, but Buffer Cache Hit Ratio is 98-99%. Where exactly is the problem? In this case, which happens to be based on a real scenario I faced a few years back, the problem may not be a disk bottleneck at all; it may very well be a memory pressure issue on the server. A quick check of the system spec’s and it is a dual duo core server with 8GB RAM running SQL Server 2005 SP1 x64 on Windows Server 2003 R2 x64. Max Server memory is configured at 6GB and we think that this should be enough to handle the workload; or is it? This is a unique scenario because there are a couple of things happening inside of this system, and they all relate to what the root cause of the performance problem is on the system. If we were to query sys.dm_exec_query_stats for the TOP 10 queries, by max_physical_reads, max_logical_reads, and max_worker_time, we may be able to find some queries that were using excessive I/O and possibly CPU against the system in their worst single execution. We can also CROSS APPLY to sys.dm_exec_sql_text() and see the statement text, and also CROSS APPLY sys.dm_exec_query_plan() to get the execution plan stored in cache. Ok, quick check, the plans are pretty big, I see some large index seeks, that estimate 2.8GB of data movement between operators, but everything looks like it is optimized the best it can be. Nothing really stands out in the code, and the indexing looks correct, and I should have enough memory to handle this in cache, so it must be a disk I/O problem right? Not exactly! If we were to look at how much memory the plan cache is taking by querying sys.dm_os_memory_clerks for the CACHESTORE_SQLCP and CACHESTORE_OBJCP clerks we might be surprised at what we find. In SQL Server 2005 RTM and SP1, the plan cache was allowed to take up to 75% of the memory under 8GB. I’ll give you a second to go back and read that again. Yes, you read it correctly, it says 75% of the memory under 8GB, but you don’t have to take my word for it, you can validate this by reading Changes in Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2. In this scenario the application uses an entirely adhoc workload against SQL Server and this leads to plan cache bloat, and up to 4.5GB of our 6GB of memory for SQL can be consumed by the plan cache in SQL Server 2005 SP1. This in turn reduces the size of the buffer cache to just 1.5GB, causing our 2.8GB of data movement in this expensive plan to cause complete flushing of the buffer cache, not just once initially, but then another time during the queries execution, resulting in excessive physical I/O from disk. Keep in mind that this is not the only query executing at the time this occurs. Remember the output of sys.dm_io_virtual_file_stats() showed high read stalls on the data files for our user databases versus higher write stalls for tempdb? The memory pressure is also forcing heavier use of tempdb to handle sorting and hashing in the environment as well. The real clue here is the Memory counters for the instance; Page Life Expectancy, Free List Pages, and Free List Stalls/sec. The fact that Page Life Expectancy is fluctuating between 50 and 150 constantly is a sign that the buffer cache is experiencing constant churn of data, once every minute to two and a half minutes. If you add to the Page Life Expectancy counter, the consistent bottoming out of Free List Pages along with Free List Stalls/sec consistently spiking over 10, and you have the perfect memory pressure scenario. All of sudden it may not be that our disk subsystem is the problem, but is instead an innocent bystander and victim. Side Note: The Page Life Expectancy counter dropping briefly and then returning to normal operating values intermittently is not necessarily a sign that the server is under memory pressure. The Books Online and a number of other references will tell you that this counter should remain on average above 300 which is the time in seconds a page will remain in cache before being flushed or aged out. This number, which equates to just five minutes, is incredibly low for modern systems and most published documents pre-date the predominance of 64 bit computing and easy availability to larger amounts of memory in SQL Servers. As food for thought, consider that my personal laptop has more memory in it than most SQL Servers did at the time those numbers were posted. I would argue that today, a system churning the buffer cache every five minutes is in need of some serious tuning or a hardware upgrade. Back to our problem and its investigation: There are two things really wrong with this server; first the plan cache is excessively consuming memory and bloated in size and we need to look at that and second we need to evaluate upgrading the memory to accommodate the workload being performed. In the case of the server I was working on there were a lot of single use plans found in sys.dm_exec_cached_plans (where usecounts=1). Single use plans waste space in the plan cache, especially when they are adhoc plans for statements that had concatenated filter criteria that is not likely to reoccur with any frequency.  SQL Server 2005 doesn’t natively have a way to evict a single plan from cache like SQL Server 2008 does, but MVP Kalen Delaney, showed a hack to evict a single plan by creating a plan guide for the statement and then dropping that plan guide in her blog post Geek City: Clearing a Single Plan from Cache. We could put that hack in place in a job to automate cleaning out all the single use plans periodically, minimizing the size of the plan cache, but a better solution would be to fix the application so that it uses proper parameterized calls to the database. You didn’t write the app, and you can’t change its design? Ok, well you could try to force parameterization to occur by creating and keeping plan guides in place, or we can try forcing parameterization at the database level by using ALTER DATABASE <dbname> SET PARAMETERIZATION FORCED and that might help. If neither of these help, we could periodically dump the plan cache for that database, as discussed as being a problem in Kalen’s blog post referenced above; not an ideal scenario. The other option is to increase the memory on the server to 16GB or 32GB, if the hardware allows it, which will increase the size of the plan cache as well as the buffer cache. In SQL Server 2005 SP1, on a system with 16GB of memory, if we set max server memory to 14GB the plan cache could use at most 9GB  [(8GB*.75)+(6GB*.5)=(6+3)=9GB], leaving 5GB for the buffer cache.  If we went to 32GB of memory and set max server memory to 28GB, the plan cache could use at most 16GB [(8*.75)+(20*.5)=(6+10)=16GB], leaving 12GB for the buffer cache. Thankfully we have SQL Server 2005 Service Pack 2, 3, and 4 these days which include the changes in plan cache sizing discussed in the Changes to Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2 blog post. In real life, when I was troubleshooting this problem, I spent a week trying to chase down the cause of the disk I/O bottleneck with our Server Admin and SAN Admin, and there wasn’t much that could be done immediately there, so I finally asked if we could increase the memory on the server to 16GB, which did fix the problem. It wasn’t until I had this same problem occur on another system that I actually figured out how to really troubleshoot this down to the root cause.  I couldn’t believe the size of the plan cache on the server with 16GB of memory when I actually learned about this and went back to look at it. SQL Server is constantly telling a story to anyone that will listen. As the DBA, you have to sit back and listen to all that it’s telling you and then evaluate the big picture and how all the data you can gather from SQL about performance relate to each other. One of the greatest tools out there is actually a free in the form of Diagnostic Scripts for SQL Server 2005 and 2008, created by MVP Glenn Alan Berry. Glenn’s scripts collect a majority of the information that SQL has to offer for rapid troubleshooting of problems, and he includes a lot of notes about what the outputs of each individual query might be telling you. When I read Pinal’s blog post SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28, I noticed that he referenced Checking Memory Related Performance Counters in his post, but there was no real explanation about why checking memory counters is so important when looking at an I/O related wait type. I thought I’d chat with him briefly on Google Talk/Twitter DM and point this out, and offer a couple of other points I noted, so that he could add the information to his blog post if he found it useful.  Instead he asked that I write a guest blog for this. I am honored to be a guest blogger, and to be able to share this kind of information with the community. The information contained in this blog post is a glimpse at how I do troubleshooting almost every day of the week in my own environment. SQL Server provides us with a lot of information about how it is running, and where it may be having problems, it is up to us to play detective and find out how all that information comes together to tell us what’s really the problem. This blog post is written by Jonathan Kehayias (Blog | Twitter). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • How to study for 70-573 Microsoft SharePoint 2010, Application Development

    - by ybbest
    I just passed my 70-573 exam today and would like to Share my experience on learning SharePoint 2010 as a beginner. 1. Book Microsoft SharePoint 2010: Building Solutions for SharePoint 2010 by Sahil Malik http://apress.com/book/view/1430228652 Sahil is an expert and MVP in SharePoint 2010.He certainly know his field and the book is well written. More importantly Sahil has got very good sense of humor in delivering the knowledge. 2.A development machine It is of great importance to have a dev machine , you cannot learn a new technology by just reading a book nor by watching some training videos. You need get your hands dirty with SharePoint a lot. 3.Training videos Since I have one year subscription with learndev , I use them as my learning resources. It is quite cheap , only cost US $99 for a year subscription and you will get not only the SharePoint training but the whole training library .The videos are from Appdev . Appdev training is of high quality. http://www.appdev.com/ http://www.learndevnow.com/ You can also get the videos from Microsoft SharePoint site. They are pretty good too. But bear in mind , by just watching these videos you will not learn much , you need to build a SharePoint 2010 machine and play with it .Try to write the sample code yourself and not just copy and paste. 4. Write blogs about your learning. This will motive you in your long journey with SharePoint learning. 5. Do check out the patterns & practices SharePoint Guidance on codeplex. http://spg.codeplex.com/ 6.Thanks for Becky Bertram,who kindly put up all the exam requirements with links to MSDN http://blog.beckybertram.com/Lists/Exam%2070573%20Study%20Guide/AllItems.aspx

    Read the article

  • SQLAuthority News – Happy Deepavali and Happy News Year

    - by pinaldave
    Diwali or Deepavali is popularly known as the festival of lights. It literally means “array of light” or “row of lamps“. Today we build a small clay maps and fill it with oil and light it up. The significance of lighting the lamp is the triumph of good over evil. I work every single day in a year but today I am spending my time with family and little one. I make sure that my daughter is aware of our culture and she learns to celebrate the festival with the same passion and values which I have. Every year on this day, I do not write a long blog post but rather write a small post with various SQL Tips and Tricks. After reading them you should quickly get back to your friends and family – it is the most important festival day. Here are a few tips and tricks: Take regular full backup of your database Avoid cursors if they can be replaced by set based process Keep your index maintenance script handy and execute them at intervals Consider Solid State Drive (SDD) for crucial database and tempdb placement Update statistics for OLTP transactions at intervals I guess that’s it for today. If you still have more time to learn. Here are few things you should consider. Get FREE Books by Sign up for tomorrow’s webcast by Rick Morelan Watch SQL in Sixty Seconds Series – FREE SQL Learning Read my earlier 2300+ articles Well, I am sure that will keep you busy for the rest of the day! Happy Diwali to All of You! Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Free Webinar Featuring Oracle Spatial and MapViewer, Oracle Business Intelligence, and Oracle Utilities

    - by stephen.garth
    Maps, BI and Network Management: Together At Last Date: Thursday, January 20 | Time: 11:00 a.m. PDT | 2:00 p.m. EDT | Duration: 1 hour Cost: FREE For years, utilities have wrestled with the challenge of providing executive management and other decision makers with maps and business intelligence during outages without compromising the performance of their real-time network operations and control systems. Join experts from Directions Media, Oracle and ThinkHuddle in this webinar for a discussion on how Oracle has addressed this challenge by incorporating Oracle Spatial data and the dashboard capabilities of Oracle Business Intelligence into a new application, Oracle Utilities Advanced Spatial Outage Analytics. Jim Steiner, Vice President of Spatial Product Management at Oracle, will provide an overview of Oracle's spatial and location technology, including Oracle Spatial 11g and Oracle Fusion Middleware MapViewer, and describe how Oracle is using this technology to spatially-enable many of its own enterprise applications. Brad Williams, Vice President of Oracle Utilities, will describe why and how the company developed Oracle Utilities Advanced Spatial Outage Analytics, how it works with Oracle Utilities Network Management System, and how this can deliver improved decision support and operational benefits to utilities. Steve Pierce, Spatial Systems Consultant with ThinkHuddle, will discuss architectural aspects and best practices in the integration of Oracle's spatial and BI technology. Following the presentation, attendees will have an opportunity to engage the panelists in a live Q&A session. Who Should Attend Executives, decision makers and analysts from IT, customer service, operations, engineering and marketing - especially in utilities, but also any business where location is important. Don't miss this webinar - Register Now. Find out more: Oracle Spatial on oracle.com More technical information on Oracle Technology Network Information on Oracle Utilities applications var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

    Read the article

  • TOTD #166: Using NoSQL database in your Java EE 6 Applications on GlassFish - MongoDB for now!

    - by arungupta
    The Java EE 6 platform includes Java Persistence API to work with RDBMS. The JPA specification defines a comprehensive API that includes, but not restricted to, how a database table can be mapped to a POJO and vice versa, provides mechanisms how a PersistenceContext can be injected in a @Stateless bean and then be used for performing different operations on the database table and write typesafe queries. There are several well known advantages of RDBMS but the NoSQL movement has gained traction over past couple of years. The NoSQL databases are not intended to be a replacement for the mainstream RDBMS. As Philosophy of NoSQL explains, NoSQL database was designed for casual use where all the features typically provided by an RDBMS are not required. The name "NoSQL" is more of a category of databases that is more known for what it is not rather than what it is. The basic principles of NoSQL database are: No need to have a pre-defined schema and that makes them a schema-less database. Addition of new properties to existing objects is easy and does not require ALTER TABLE. The unstructured data gives flexibility to change the format of data any time without downtime or reduced service levels. Also there are no joins happening on the server because there is no structure and thus no relation between them. Scalability and performance is more important than the entire set of functionality typically provided by an RDBMS. This set of databases provide eventual consistency and/or transactions restricted to single items but more focus on CRUD. Not be restricted to SQL to access the information stored in the backing database. Designed to scale-out (horizontal) instead of scale-up (vertical). This is important knowing that databases, and everything else as well, is moving into the cloud. RBDMS can scale-out using sharding but requires complex management and not for the faint of heart. Unlike RBDMS which require a separate caching tier, most of the NoSQL databases comes with integrated caching. Designed for less management and simpler data models lead to lower administration as well. There are primarily three types of NoSQL databases: Key-Value stores (e.g. Cassandra and Riak) Document databases (MongoDB or CouchDB) Graph databases (Neo4J) You may think NoSQL is panacea but as I mentioned above they are not meant to replace the mainstream databases and here is why: RDBMS have been around for many years, very stable, and functionally rich. This is something CIOs and CTOs can bet their money on without much worry. There is a reason 98% of Fortune 100 companies run Oracle :-) NoSQL is cutting edge, brings excitement to developers, but enterprises are cautious about them. Commercial databases like Oracle are well supported by the backing enterprises in terms of providing support resources on a global scale. There is a full ecosystem built around these commercial databases providing training, performance tuning, architecture guidance, and everything else. NoSQL is fairly new and typically backed by a single company not able to meet the scale of these big enterprises. NoSQL databases are good for CRUDing operations but business intelligence is extremely important for enterprises to stay competitive. RDBMS provide extensive tooling to generate this data but that was not the original intention of NoSQL databases and is lacking in that area. Generating any meaningful information other than CRUDing require extensive programming. Not suited for complex transactions such as banking systems or other highly transactional applications requiring 2-phase commit. SQL cannot be used with NoSQL databases and writing simple queries can be involving. Enough talking, lets take a look at some code. This blog has published multiple blogs on how to access a RDBMS using JPA in a Java EE 6 application. This Tip Of The Day (TOTD) will show you can use MongoDB (a document-oriented database) with a typical 3-tier Java EE 6 application. Lets get started! The complete source code of this project can be downloaded here. Download MongoDB for your platform from here (1.8.2 as of this writing) and start the server as: arun@ArunUbuntu:~/tools/mongodb-linux-x86_64-1.8.2/bin$./mongod./mongod --help for help and startup optionsSun Jun 26 20:41:11 [initandlisten] MongoDB starting : pid=11210port=27017 dbpath=/data/db/ 64-bit Sun Jun 26 20:41:11 [initandlisten] db version v1.8.2, pdfile version4.5Sun Jun 26 20:41:11 [initandlisten] git version:433bbaa14aaba6860da15bd4de8edf600f56501bSun Jun 26 20:41:11 [initandlisten] build sys info: Linuxbs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 2017:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41Sun Jun 26 20:41:11 [initandlisten] waiting for connections on port 27017Sun Jun 26 20:41:11 [websvr] web admin interface listening on port 28017 The default directory for the database is /data/db and needs to be created as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db You can specify a different directory using "--dbpath" option. Refer to Quickstart for your specific platform. Using NetBeans, create a Java EE 6 project and make sure to enable CDI and add JavaServer Faces framework. Download MongoDB Java Driver (2.6.3 of this writing) and add it to the project library by selecting "Properties", "LIbraries", "Add Library...", creating a new library by specifying the location of the JAR file, and adding the library to the created project. Edit the generated "index.xhtml" such that it looks like: <h1>Add a new movie</h1><h:form> Name: <h:inputText value="#{movie.name}" size="20"/><br/> Year: <h:inputText value="#{movie.year}" size="6"/><br/> Language: <h:inputText value="#{movie.language}" size="20"/><br/> <h:commandButton actionListener="#{movieSessionBean.createMovie}" action="show" title="Add" value="submit"/></h:form> This page has a simple HTML form with three text boxes and a submit button. The text boxes take name, year, and language of a movie and the submit button invokes the "createMovie" method of "movieSessionBean" and then render "show.xhtml". Create "show.xhtml" ("New" -> "Other..." -> "Other" -> "XHTML File") such that it looks like: <head> <title><h1>List of movies</h1></title> </head> <body> <h:form> <h:dataTable value="#{movieSessionBean.movies}" var="m" > <h:column><f:facet name="header">Name</f:facet>#{m.name}</h:column> <h:column><f:facet name="header">Year</f:facet>#{m.year}</h:column> <h:column><f:facet name="header">Language</f:facet>#{m.language}</h:column> </h:dataTable> </h:form> This page shows the name, year, and language of all movies stored in the database so far. The list of movies is returned by "movieSessionBean.movies" property. Now create the "Movie" class such that it looks like: import com.mongodb.BasicDBObject;import com.mongodb.BasicDBObject;import com.mongodb.DBObject;import javax.enterprise.inject.Model;import javax.validation.constraints.Size;/** * @author arun */@Modelpublic class Movie { @Size(min=1, max=20) private String name; @Size(min=1, max=20) private String language; private int year; // getters and setters for "name", "year", "language" public BasicDBObject toDBObject() { BasicDBObject doc = new BasicDBObject(); doc.put("name", name); doc.put("year", year); doc.put("language", language); return doc; } public static Movie fromDBObject(DBObject doc) { Movie m = new Movie(); m.name = (String)doc.get("name"); m.year = (int)doc.get("year"); m.language = (String)doc.get("language"); return m; } @Override public String toString() { return name + ", " + year + ", " + language; }} Other than the usual boilerplate code, the key methods here are "toDBObject" and "fromDBObject". These methods provide a conversion from "Movie" -> "DBObject" and vice versa. The "DBObject" is a MongoDB class that comes as part of the mongo-2.6.3.jar file and which we added to our project earlier.  The complete javadoc for 2.6.3 can be seen here. Notice, this class also uses Bean Validation constraints and will be honored by the JSF layer. Finally, create "MovieSessionBean" stateless EJB with all the business logic such that it looks like: package org.glassfish.samples;import com.mongodb.BasicDBObject;import com.mongodb.DB;import com.mongodb.DBCollection;import com.mongodb.DBCursor;import com.mongodb.DBObject;import com.mongodb.Mongo;import java.net.UnknownHostException;import java.util.ArrayList;import java.util.List;import javax.annotation.PostConstruct;import javax.ejb.Stateless;import javax.inject.Inject;import javax.inject.Named;/** * @author arun */@Stateless@Namedpublic class MovieSessionBean { @Inject Movie movie; DBCollection movieColl; @PostConstruct private void initDB() throws UnknownHostException { Mongo m = new Mongo(); DB db = m.getDB("movieDB"); movieColl = db.getCollection("movies"); if (movieColl == null) { movieColl = db.createCollection("movies", null); } } public void createMovie() { BasicDBObject doc = movie.toDBObject(); movieColl.insert(doc); } public List<Movie> getMovies() { List<Movie> movies = new ArrayList(); DBCursor cur = movieColl.find(); System.out.println("getMovies: Found " + cur.size() + " movie(s)"); for (DBObject dbo : cur.toArray()) { movies.add(Movie.fromDBObject(dbo)); } return movies; }} The database is initialized in @PostConstruct. Instead of a working with a database table, NoSQL databases work with a schema-less document. The "Movie" class is the document in our case and stored in the collection "movies". The collection allows us to perform query functions on all movies. The "getMovies" method invokes "find" method on the collection which is equivalent to the SQL query "select * from movies" and then returns a List<Movie>. Also notice that there is no "persistence.xml" in the project. Right-click and run the project to see the output as: Enter some values in the text box and click on enter to see the result as: If you reached here then you've successfully used MongoDB in your Java EE 6 application, congratulations! Some food for thought and further play ... SQL to MongoDB mapping shows mapping between traditional SQL -> Mongo query language. Tutorial shows fun things you can do with MongoDB. Try the interactive online shell  The cookbook provides common ways of using MongoDB In terms of this project, here are some tasks that can be tried: Encapsulate database management in a JPA persistence provider. Is it even worth it because the capabilities are going to be very different ? MongoDB uses "BSonObject" class for JSON representation, add @XmlRootElement on a POJO and how a compatible JSON representation can be generated. This will make the fromXXX and toXXX methods redundant.

    Read the article

  • TOTD #166: Using NoSQL database in your Java EE 6 Applications on GlassFish - MongoDB for now!

    - by arungupta
    The Java EE 6 platform includes Java Persistence API to work with RDBMS. The JPA specification defines a comprehensive API that includes, but not restricted to, how a database table can be mapped to a POJO and vice versa, provides mechanisms how a PersistenceContext can be injected in a @Stateless bean and then be used for performing different operations on the database table and write typesafe queries. There are several well known advantages of RDBMS but the NoSQL movement has gained traction over past couple of years. The NoSQL databases are not intended to be a replacement for the mainstream RDBMS. As Philosophy of NoSQL explains, NoSQL database was designed for casual use where all the features typically provided by an RDBMS are not required. The name "NoSQL" is more of a category of databases that is more known for what it is not rather than what it is. The basic principles of NoSQL database are: No need to have a pre-defined schema and that makes them a schema-less database. Addition of new properties to existing objects is easy and does not require ALTER TABLE. The unstructured data gives flexibility to change the format of data any time without downtime or reduced service levels. Also there are no joins happening on the server because there is no structure and thus no relation between them. Scalability and performance is more important than the entire set of functionality typically provided by an RDBMS. This set of databases provide eventual consistency and/or transactions restricted to single items but more focus on CRUD. Not be restricted to SQL to access the information stored in the backing database. Designed to scale-out (horizontal) instead of scale-up (vertical). This is important knowing that databases, and everything else as well, is moving into the cloud. RBDMS can scale-out using sharding but requires complex management and not for the faint of heart. Unlike RBDMS which require a separate caching tier, most of the NoSQL databases comes with integrated caching. Designed for less management and simpler data models lead to lower administration as well. There are primarily three types of NoSQL databases: Key-Value stores (e.g. Cassandra and Riak) Document databases (MongoDB or CouchDB) Graph databases (Neo4J) You may think NoSQL is panacea but as I mentioned above they are not meant to replace the mainstream databases and here is why: RDBMS have been around for many years, very stable, and functionally rich. This is something CIOs and CTOs can bet their money on without much worry. There is a reason 98% of Fortune 100 companies run Oracle :-) NoSQL is cutting edge, brings excitement to developers, but enterprises are cautious about them. Commercial databases like Oracle are well supported by the backing enterprises in terms of providing support resources on a global scale. There is a full ecosystem built around these commercial databases providing training, performance tuning, architecture guidance, and everything else. NoSQL is fairly new and typically backed by a single company not able to meet the scale of these big enterprises. NoSQL databases are good for CRUDing operations but business intelligence is extremely important for enterprises to stay competitive. RDBMS provide extensive tooling to generate this data but that was not the original intention of NoSQL databases and is lacking in that area. Generating any meaningful information other than CRUDing require extensive programming. Not suited for complex transactions such as banking systems or other highly transactional applications requiring 2-phase commit. SQL cannot be used with NoSQL databases and writing simple queries can be involving. Enough talking, lets take a look at some code. This blog has published multiple blogs on how to access a RDBMS using JPA in a Java EE 6 application. This Tip Of The Day (TOTD) will show you can use MongoDB (a document-oriented database) with a typical 3-tier Java EE 6 application. Lets get started! The complete source code of this project can be downloaded here. Download MongoDB for your platform from here (1.8.2 as of this writing) and start the server as: arun@ArunUbuntu:~/tools/mongodb-linux-x86_64-1.8.2/bin$./mongod./mongod --help for help and startup optionsSun Jun 26 20:41:11 [initandlisten] MongoDB starting : pid=11210port=27017 dbpath=/data/db/ 64-bit Sun Jun 26 20:41:11 [initandlisten] db version v1.8.2, pdfile version4.5Sun Jun 26 20:41:11 [initandlisten] git version:433bbaa14aaba6860da15bd4de8edf600f56501bSun Jun 26 20:41:11 [initandlisten] build sys info: Linuxbs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 2017:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41Sun Jun 26 20:41:11 [initandlisten] waiting for connections on port 27017Sun Jun 26 20:41:11 [websvr] web admin interface listening on port 28017 The default directory for the database is /data/db and needs to be created as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db You can specify a different directory using "--dbpath" option. Refer to Quickstart for your specific platform. Using NetBeans, create a Java EE 6 project and make sure to enable CDI and add JavaServer Faces framework. Download MongoDB Java Driver (2.6.3 of this writing) and add it to the project library by selecting "Properties", "LIbraries", "Add Library...", creating a new library by specifying the location of the JAR file, and adding the library to the created project. Edit the generated "index.xhtml" such that it looks like: <h1>Add a new movie</h1><h:form> Name: <h:inputText value="#{movie.name}" size="20"/><br/> Year: <h:inputText value="#{movie.year}" size="6"/><br/> Language: <h:inputText value="#{movie.language}" size="20"/><br/> <h:commandButton actionListener="#{movieSessionBean.createMovie}" action="show" title="Add" value="submit"/></h:form> This page has a simple HTML form with three text boxes and a submit button. The text boxes take name, year, and language of a movie and the submit button invokes the "createMovie" method of "movieSessionBean" and then render "show.xhtml". Create "show.xhtml" ("New" -> "Other..." -> "Other" -> "XHTML File") such that it looks like: <head> <title><h1>List of movies</h1></title> </head> <body> <h:form> <h:dataTable value="#{movieSessionBean.movies}" var="m" > <h:column><f:facet name="header">Name</f:facet>#{m.name}</h:column> <h:column><f:facet name="header">Year</f:facet>#{m.year}</h:column> <h:column><f:facet name="header">Language</f:facet>#{m.language}</h:column> </h:dataTable> </h:form> This page shows the name, year, and language of all movies stored in the database so far. The list of movies is returned by "movieSessionBean.movies" property. Now create the "Movie" class such that it looks like: import com.mongodb.BasicDBObject;import com.mongodb.BasicDBObject;import com.mongodb.DBObject;import javax.enterprise.inject.Model;import javax.validation.constraints.Size;/** * @author arun */@Modelpublic class Movie { @Size(min=1, max=20) private String name; @Size(min=1, max=20) private String language; private int year; // getters and setters for "name", "year", "language" public BasicDBObject toDBObject() { BasicDBObject doc = new BasicDBObject(); doc.put("name", name); doc.put("year", year); doc.put("language", language); return doc; } public static Movie fromDBObject(DBObject doc) { Movie m = new Movie(); m.name = (String)doc.get("name"); m.year = (int)doc.get("year"); m.language = (String)doc.get("language"); return m; } @Override public String toString() { return name + ", " + year + ", " + language; }} Other than the usual boilerplate code, the key methods here are "toDBObject" and "fromDBObject". These methods provide a conversion from "Movie" -> "DBObject" and vice versa. The "DBObject" is a MongoDB class that comes as part of the mongo-2.6.3.jar file and which we added to our project earlier.  The complete javadoc for 2.6.3 can be seen here. Notice, this class also uses Bean Validation constraints and will be honored by the JSF layer. Finally, create "MovieSessionBean" stateless EJB with all the business logic such that it looks like: package org.glassfish.samples;import com.mongodb.BasicDBObject;import com.mongodb.DB;import com.mongodb.DBCollection;import com.mongodb.DBCursor;import com.mongodb.DBObject;import com.mongodb.Mongo;import java.net.UnknownHostException;import java.util.ArrayList;import java.util.List;import javax.annotation.PostConstruct;import javax.ejb.Stateless;import javax.inject.Inject;import javax.inject.Named;/** * @author arun */@Stateless@Namedpublic class MovieSessionBean { @Inject Movie movie; DBCollection movieColl; @PostConstruct private void initDB() throws UnknownHostException { Mongo m = new Mongo(); DB db = m.getDB("movieDB"); movieColl = db.getCollection("movies"); if (movieColl == null) { movieColl = db.createCollection("movies", null); } } public void createMovie() { BasicDBObject doc = movie.toDBObject(); movieColl.insert(doc); } public List<Movie> getMovies() { List<Movie> movies = new ArrayList(); DBCursor cur = movieColl.find(); System.out.println("getMovies: Found " + cur.size() + " movie(s)"); for (DBObject dbo : cur.toArray()) { movies.add(Movie.fromDBObject(dbo)); } return movies; }} The database is initialized in @PostConstruct. Instead of a working with a database table, NoSQL databases work with a schema-less document. The "Movie" class is the document in our case and stored in the collection "movies". The collection allows us to perform query functions on all movies. The "getMovies" method invokes "find" method on the collection which is equivalent to the SQL query "select * from movies" and then returns a List<Movie>. Also notice that there is no "persistence.xml" in the project. Right-click and run the project to see the output as: Enter some values in the text box and click on enter to see the result as: If you reached here then you've successfully used MongoDB in your Java EE 6 application, congratulations! Some food for thought and further play ... SQL to MongoDB mapping shows mapping between traditional SQL -> Mongo query language. Tutorial shows fun things you can do with MongoDB. Try the interactive online shell  The cookbook provides common ways of using MongoDB In terms of this project, here are some tasks that can be tried: Encapsulate database management in a JPA persistence provider. Is it even worth it because the capabilities are going to be very different ? MongoDB uses "BSonObject" class for JSON representation, add @XmlRootElement on a POJO and how a compatible JSON representation can be generated. This will make the fromXXX and toXXX methods redundant.

    Read the article

  • Building services with .Net Part 1

    - by Allan Rwakatungu
    On the 26th of May 2010 , I made a presentation to the .NET user group meeting (thanks to Malisa Ncube for organizing this event every month … ). If you missed my presentation , we talked about why we should all be building services … better still using the .NET framework. This blog post is an introduction to services , why you would want to build services and how you can build services using the .NET framework. What is a service? OASIS defines service as "a mechanism to enable access to one or more capabilities, where the access is provided using a prescribed interface and is exercised consistent with constraints and policies as specified by the service description." [1]. If the above definition sounds to academic , you can also define a service as loosely coupled units of functionality that have no calls to each other embedded in the. Instead of services embedding calls to each other in their service code they use defined protocols that describe how services pass and parse messages. This is a good way to think about services if you’re from an objected oriented background. While in object oriented programming functions make calls to each other, in service oriented programming, functions pass messages between each other. Why would you want to use services? 1. If your enterprise architecture looks like this   Services are the building blocks for SOA . With SOA you can move away from the sphaggetti infrastructure that is common in most enterprises. The complexity or lack of visibility of the integration points in your enterprises makes it difficult and costly to implement new initiatives and changes into the business - and even impossible in some cases - as it is not possible to identify the impact a change in one system might have to other systems. With services you can move to an architecture like this Your building blocks from Spaghetti infrastructure to something that is more well-defined and manageable to achieve cost efficiency and not least business agility - enabling you to react to changes in the market with speed and achieve operational efficiency and control are services. 2. If you want to become the Gates or Zuckerburger. Have you heard about Web 2.0 ? Mashups? Software as a service (SAAS) ? Cloud computing ?   They all offer you the opportunity to have scalable but low cost business models and they built using services.  Some of my favorite companies that leverage services for their business models include  https://www.salesforce.com/ (cloud CRM) http://www. twitter.com (more people use twitter clients built by 3rd parties than their official clients) http://www.kayak.com/ (compares data from other travel sites to give information to users in one location) Services with the .NET framework      If you are a .NET developer and you want to develop services, Windows Communication Framework (WCF) is the tool for you. WCF is Microsoft’s unified programming model (service model) for building service oriented applications. ( Before .NET 3.0 you had several models for programming services in .NET including .NET remoting, Web services (ASMX), COM +, Microsoft Messaging queuing (MSMQ) etc, after .NET 3.0 the programming model was unified into one i.e. WCF ). Windows Communication Framework (WCF) provides you 1. An Software Development Kit (SDK) for creating SOA applications 2. A runtime for running services on the Windows platform Why should you use Windows Communication Foundation if you’re programming services?   1. It supports interoperable and open standards e.g. WS* protocols for programming SOAP services 2. It has a unified programming model. Whether you use TCP or Http or Pipes or transmitting using Messaging Queues, programmers need to learn just one way to program. Previously you had .NET remoting, MSMQ, Web services, COM+ and they were all done differently 3. Productive programming model You don’t have to worry about all the plumbing involved to write services. You have a rich declarative programming model to add stuff like logging, transactions, and reliable messages in-built in the Windows Communication Framework. Understanding services in WCF The basic principles of WCF are as easy as ABC A – Address This is where the service is located B- Binding This describes how you communicate with the service e.g. Use TCP, HTTP or both. How to exchange security information with the service etc. C – Contract This defines what the service can do. E.g. Pay water bill, Make a phone call A - Addresses In WCF, an address is a combination of transport, server name, port and path Example addresses may include http://localhost:8001 net.tcp://localhost:8002/MyService net.pipe://localhost/MyPipe net.msmq://localhost/private/MyService net.msmq://localhost/MyService B- Binding   There are numerous ways to communicate with services , different ways that a message can be formatted/sent/secured, that allows you to tailor your service for the compatibility/performance you require for your solution. Transport You can use HTTP TCP MSMQ , Named pipes, Your own custom transport etc Message You  can send a plain text binary, Message Transmission Optimization Mechanism (MTOM) message Communication security No security Transport security Message security Authenticating and authorizing callers etc Behaviour You service can support Transactions Be reliable Use queues Support ajax etc C - Contract You define what your service can do using Service contracts :- Define operations that your service can do, communications and behaviours Data contracts :- Define the messages that are passed from and into your service and how they are formatted Fault contracts :- Defines errors types in your service   As an example, suppose your service service shows money. You define your service contract using a interface [ServiceContract] public interface IShowMeTheMoney {   [OperationContract]    Money Show(); } You define the data contract by annotating a class it with the Data Contract attribute and fields you want to pass in the message as Data Members. (Note:- In the latest versions of WCF you dont have to use attributes if you passing all the objects properties in the message) [DataContract] public Money {   [DataMember]   public string Currency { get; set; }   [DataMember]   public Decimal Amount { get; set; }   public string Comment { get; set; } } Features of Windows Communication Foundation Windows Communication Foundation is not only simple but feature rich , offering you several options to tweak your service to fit your business requirements. Some of the features of WCF include 1. Workflow services You can combine WCF with Windows WorkFlow Foundation (WWF) to write workflow type services 2. Control how your data (messages) are transferred and serialized e.g. you can serialize your business objects as XML or binary 3. control over session management , instance creation and concurrency management without writing code if you like 4. Queues and reliable sessions. You can store messages from the sending client and later forward them to the receiving application. You can also guarantee that messages will arrive at their destincation. 5.Transactions:  You can have different services participate in a transaction operations that can be rolled back if needed 6. Security. WCF has rich features for authorization and authentication  as well as keep audit trails 7. Web programming model. WCF allows developers to expose services as non SOAP endpoints 8. Inbuilt features that you can use to write JSON and services that support AJAX applications And lots more In my next blog I will show you how you can use WCF features to write a real world business service.               Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ]] /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Prevent Windows 7 User Accounts from accessing files in other User Accounts

    - by Mantis
    I'm trying to set up another User Account on my Windows 7 Professional laptop for use by another person. I do not want that person to have access to any of the files in my User Account on the same machine. This machine has a single hard disk formatted with NTFS. User accounts data is stored in the default location, C:\Users. I use the computer with a Standard Account (not an Administrator). Let's call my user account "User A." I have given the new user a Standard Account. Let's call the new user's account "User B." To be clear, I want User B to have the ability to log in to her account, to use the computer, but to be unable to access any of the files in the User A account on the same machine. Currently, User B cannot use Windows Explorer to navigate to the location C:\Users\User A. However, by simply using Windows Search, User B can easily find and open documents saved in C:\Users\User A\Documents. After opening a document, that document's full path appears in "Recent Places" in Windows Explorer, and the document appears as a file that can be opened using the "Recent" feature in Word 2010. This is not the desired behavior. User B should not have the ability to see any documents using Windows Search or anything else. I have attempted to set permissions using the following procedure. Using an Administrator account, navigate to C:\Users and right-click on the "User A" folder. Select "Properties." In the "User A Properties" window that appears, click the "Security" tab. Click the "Edit..." button to change permissions. IN the "Permissions for User B" window that appears, under "Group or User Names," select User B. Under "Permissions for User B", check the box under the "Deny" column for the "Full Control" row. Ensure that the "Deny" box is automatically checked for all the other rows, and then click "OK." The system should then begin working. The process could take several minutes. When I followed this procedure, I received several "Access Denied" errors, suggesting that the system was unable to set the permissions as I had directed. I think this might be one of the reasons why User B is still able to access files in User A's account folders. Is there any other way I could accomplish my goal here? Thank you.

    Read the article

  • 10 Useful CSS Tips And Tutorials

    - by Jyoti
    CSS is a technology that web designers use everyday, but yet it is something that most struggle with as well. Whether it’s keeping stylesheets for large sites manageable or creating image effects that are cross browser compatible, there are plenty of things to cause frustration. This article is an attempt to provide you with a few resources that might help you with your CSS or introduce you to a few tricks you didn’t know about. Organizing Your Stylesheet Using CSS Edit: Rob Soule of Viget Labs shows you how to organize your style sheets using CSS Edit, a powerful CSS editor built exclusively for the mac. Tips For Organizing Your CSS: A set of practical tips for organizing your style sheets. Write A Well Structured CSS File: A detailed and well written post about how to write a well structured CSS file. Expandable CSS Tabs Tutorials: A tutorial on creating expandable CSS tabs. Simple Round CSS Buttons: Learn how to create rounded corner buttons with only One Image and One CSS file. Beautiful CSS Buttons With Icons Set: Learn how to create a clean set of buttons with CSS and an icon set. Scalable CSS Buttons Using PNG And Background Colors: Create Resizing Thumbnails Using Overflow Property: Learn how to create a cool resizing thumbnail effect. CSS Decorative Gallery: Decorate your images and photo galleries without editing the source images. Placing Text Over Image Using CSS Position Property: A simple technique for placing text over an image.

    Read the article

  • OpenSSL Handshake Failure (14094410) - Erroneous Client Certificate Check from Mobile Phone

    - by Clayton Sims
    I'm running a proxy server through Apache with modssl, which we're using to proxy POSTs from mobile devices to another internal server. This works successfully for most clients, but requests from a specific phone model (Nokia 2690) are showing a bizarre handshake failure. It looks as though OpenSSL is either requesting (or attempting to read an unsolicited) client certificate from the phone (which is especially bizarre because j2me's kssl implementation doesn't support client certs). I've disabled client certificates with the SSLVerifyClient none directive in both the virtual host conf and the modssl conf. The trace from error.log on debug level is (details redacted): [client 41.220.207.10] Connection to child 0 established (server www.myserver.org:443) [info] Seeding PRNG with 656 bytes of entropy [debug] ssl_engine_kernel.c(1866): OpenSSL: Handshake: start [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: before/accept initialization [debug] ssl_engine_io.c(1882): OpenSSL: read 11/11 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d0] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1882): OpenSSL: read 49/49 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90db] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 read client hello A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write server hello A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write certificate A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write server done A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 flush data [debug] ssl_engine_io.c(1882): OpenSSL: read 5/5 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d0] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1882): OpenSSL: read 2/2 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d5] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_kernel.c(1879): OpenSSL: Read: SSLv3 read client certificate A [debug] ssl_engine_kernel.c(1898): OpenSSL: Exit: failed in SSLv3 read client certificate A [client 41.220.207.10] SSL library error 1 in handshake (server www.myserver.org:443) [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure [client 41.220.207.10] Connection closed to child 0 with abortive shutdown (server www.myserver.org:443) I've tried enabling all ciphers and all protocols temporarily with modssl, neither of which seemed to be the issue. The phone should be using RSA_RC4_128_MD5 and SSLv3, all of which are available. Am I missing something more fundamental about what's failing here? It seemed like the certificate request might have been part of a renegotiation failure. I tried enabling SSLInsecureRenegotiation On on the virtual host, in case it was an issue of the phone's SSL not supporting the new protocol, but to no avail. Currently running: Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o Apache proxy_html/3.0.1

    Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >