Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 347/772 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• UPS compatible with Linux box?

  - by Somebody still uses you MS-DOS

  I'm buying this unit from deal extreme: it's a bitorrent downloader, with NAS capability. I'm interested in sharing an external HD in it, with media and backup purposes. I'm afraid of energy problems (don't know if this is the correct term), corrupting my mounted drives (like after a storm), so I thought about buying an UPS that sends a "signal" to my Linux box, and a script in my Linux box would unmout everything to avoid problems. Do this "UPS signal" feature exists? Do you have model suggestions? Thanks!

  Read the article

• After upgrade to 12.04 wireless keeps dropping on BCM4312

  - by Sheket

  I know there are plenty of questions very similar to these, but I've tried practically everything and it still isn't working. Some solutions get the wireless connection working, but it goes very slow and drops after a few minutes. Then it won't reconnect and keeps asking for password. Hope you can help me. Thanks in advance. This is the output for sudo lshw -C network *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:f0300000-f0303fff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: c0 serial: 00:23:5a:9b:6e:b1 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:f0200000-f023ffff ioport:a000(size=128) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:24:2c:83:f0:81 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-30-generic firmware=478.104 link=no multicast=yes wireless=IEEE 802.11bg And for lsmod | grep b43 b43 342643 0 mac80211 436455 1 b43 cfg80211 178679 2 b43,mac80211 bcma 25651 1 b43 ssb 50691 1 b43 And for rfkill list 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Drive reporting incorrect free space

  - by Oli

  So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

  Read the article

• How to select a user and remove all groups they are a member of using Powershell (with Quest)?

  - by Don

  I've read quite a bit online about this and thought I had found a solution, but it doesn't seem to be working like I would expect. I am wanting to get a user based on the username I input, then remove all groups that it is a member of. Basically the same thing as going into ADUC, selecting the user, selecting the Member Of tab, highlighting everything (except domain users of course) and selecting remove. Here's the command I'm trying to use: Get-QADUser -Name $username | Remove-QADMemberOf -RemoveAll Others have said online that it works for them, but so far it hasn't for me. It doesn't give an error, it accepts the command just fine, but when I look in ADUC, the groups are still there for the user. Any suggestions as to what I may be doing wrong? Executing from Windows 7 with domain admin rights, Exchange cmdlets and Quest snapin loaded. Thanks!

  Read the article

• Prevent Excel Chart Data Labels overlapping

  - by Nicholas

  I have an Excel dashboard with line charts containing data labels. Specifically, we are only using the data labels at the rightmost end of the lines, and the labels consist of the Series name and final value. By changing a dropdown, the dashboard is automatically updated to give 19 different dashboards. The problem is that we can't work out any way of preventing the labels overlapping. Everything else on the dashboard can be made to automatically update nicely, except for this. Can anybody think of a way to do this? E.g. plugin or macro.

  Read the article

• Make download dialog show up for pictures in IIS 6.0

  - by LinuxGnut

  I have a client that is offering picture downloads from their site. They want the user to have to download the picture, rather than having it appear in the browser when the link is clicked. Inserting the text "Right-click to save as" or something similar isn't an option with this client, as everything needs to be done their way. Now, I know I could accomplish this task in PHP or ASP, but I'd rather not have to write an addition to Magento to accomplish this. So is there a way in IIS 6.0 (Server 2003) to send the correct headers for image formats in that it will make a download dialog pop up?

  Read the article

• Complex, yet simple crafting system model

  - by KatShot

  I'm working on some arcade shooter/slasher, and the main logline is "Kick'em with everything you want". There's not so many enemies in GDD, main focus is on tons of weapons and gadgets to cause mayhem. To get weapon, you need to craft it, and now crafting system looks simple, like: 1) You got three slots for weapon parts (like A, B, C) 2) You collect misc weapon parts, and when you got atleast one for every slot, you can craft a weapon (for example, if you got A1, B1, B2, B3 and C1, you can craft such models - A1B1C1, A1B2C1, A1B3C1) As for me, this crafting system is too simple, because weapon parts will just fall from the top of screen, often enough. That's why I'm thinking about adding some more crafting system levels, like resources (collect 10 scrap pieces to make part A1 or C3), etc. My question is: How can i add some more complex, still simple, transparent levels in crafting system? upd. For example, in Minecraft or Terraria, first 5-10 crafting recipies quite transparent and simple IMHO. But then it turns into huge mess to understand, how to craft this or that (for example, fishing rod)

  Read the article

• Best ways to move a server room and 80 desktops to a new building

  - by Marko

  Need to plan the best way to physically move a server room (12 IBM x3400 towers) and all associated networking equipment to a new building. Everything is going, comms (80 strong call centre operation), desktops(80-90) the whole lot and has to be done efficiently over a weekend. What I cant seem to find are the best ways to move equipment, i.e is it best to remove hard drives and pack them separetely, do I pack the chassis' with foam and/or surround them in bubble wrap? Are there specific products designed to move computer equipment and where would I find these. The internet has failed me so far, please help

  Read the article

• Dump vim screen into a file

  - by user18151

  I need to dump whatever is seen on the vim screen as it is, with colors and everything. Is there a way do to id. I am hoping that ncurses uses the same escape sequence for colors as bash. So when I'll do cat on the file that I've dumped the screen to, I should get the same output as the vim file. I want to use it in the scenario when I am doing a side by side colorful diff of files and need to print them. If anyone knows of any other side-by-side colorful diff programs, please feel free to mention in the comments (not answers because I am hoping that this question will be answered so that it can be used by others).

  Read the article

• How to Check the Performance of VPS?

  - by Ngu Soon Hui

  I have subscribed to a VPS offered by a hosting provider. The guaranteed performance 1GB RAM, 1M bandwidth. But I found that from time to time the websites can be very slow, so slow that it could take more than 30 seconds to load a simple Joomla website. However the website resumed the usual speed after a few minutes. This created a problem for me when I want to report the performance problem to the hosting provider. They would say to me "see, no problem". Of course there is no problem because the problem is only there for a few minutes , and everything is normal. This ocassionally-slow problem will bug me a few days later and the cycle repeats. Any idea how to solve this problem?

  Read the article

• I have 4 GB RAM, but the system only reports 3 GB? [closed]

  - by RawR Crew

  Possible Duplicate: Windows 7 64-bit is only using 3 GB out of 4 GB My HP HDX 16 laptop has 4GB of ram and runs a 64-bit system. I always go into Dxdiag for some reason and i always see it says 4096 MB of RAM. But today I felt the PC was misbehaving, so i opened it and it said 3128 MB of RAM. Where did that 1 GB go?? When I check the computer properties, it says I'm using a 64-bit system with 4.00GB of RAM, but why does everything else say it has 3?

  Read the article

• Laptop connectd to 2 VPNs (1st for Internet over WiFi, 2nd to access shared folders on another network) is failing to route traffic over 2nd VPN

  - by Triynko

  I set up a VPN on Windows Server 2008 through its routing and remote access services. I connected to the VPN, and configured the client to allow for split tunneling (Internet traffic goes to my default gateway, and traffic directed to the VPN server goes through the VPN gateway). I had to adjust the routing table, adding an entry to ensure traffic to my VPN server goes through the tunnel by running the command "route add [VPN.IP] mask 255.255.255.255 [VPN.GATEWAY.IP] IF [VPN_INTERFACE_#]". Adding the correct route makes everything work flawlessly on all my machines, except for one. The problematic machine is a laptop that's not directly connected to a network. It connects to WiFi, and then connects to a VPN to obtain internet access. Finally, it connects to the target VPN server for file sharing. The "route add" trick doesn't work for that laptop, I'm assuming because it's connected to two VPNs, and I'm getting the routing wrong. Can anyone familiar with routing explain what routes I may need to add?

  Read the article

• Crontab file is garbled! HELP!

  - by DNA

  I accidentally deleted my .bashrc file in Ubuntu 11.10. I think I restored it but I have two major issues now: Everything that I type has a red squiggly line under it in this field and the suggestion is a german word. My crontab file is completely garbled and looks like this: \00\00\00\00\00\00\00\00\00\00\00\00\00\008\00\00\00\00\00\008@\00\00\00\00\008@\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00@\00\00\00\00\00\00\00@\00\00\00\00\00tw\00\00\00\00\00\00tw\00\00\00\00\00\00\00\00 \00\00\00\00\00\00\00\00\00\00\00(~\00\00\00\00\00\00(~\00\00\00\00\00(~\00\00\00\00\00\00\00\00\00\00\00H\00\00\00\00\00\00\00\00 \00\00\00\00\00\00\00\00\00\00\00P~\00\00\00\00\00\00P~\00\00\00\00\00P~\00\00\00\00\00\90\00\00\00\00\00\00\90\00\00\00\00\00\00\00\00\00\00 HELP!!!! I am new at Ubuntu and don't know what to do. Please don't tell me to reinstall because I don't know how to. I got this computer from system76 with Ubuntu installed in it.

  Read the article

• Computer stopped working (ASUS P5GD1-VM)

  - by Gordonrjones

  My computer stopped working the other day. I came down and it was kind of chirping away. Then, when I restarted it, it only did the same thing. I unplugged everything not needed and it did nothing at all. I thought maybe the power supply wasn't working, but when I took the cover off the green light on the motherboard was on and the power supply is making a little buzzing sound. But nothing happens when I turn the computer on, other than the green light on the motherboard flickers a bit. I checked the memory in other computer and it works fine. I'd love to be able to fix this with as little cost as possible. Can someone here help? P4-640 (3.2E GHz, 800 FSB, L2:2MB, EM64T, HT)

  Read the article

• How do I install Visual Studio 2010 Express somewhere besides C:?

  - by TwentyMiles

  I have a SSD as my primary (C:) drive, mainly used for quickly loading games. It's pretty small (~30 GB) so I want to keep things that don't really need a speed boost off of it. I attempted installing the Visual Studio 2010 Express beta last night, and It claimed to require 2.1 GB of space so I changed the install directory to a secondary, non-SSD drive. After this, the installer said that it would use 1.8 GB on C: and ~200 MB on the secondary drive. While this token gesture of moving 1/10 of the app to the place I told it to is cute, I really want to install everything I can to the secondary drive. Is there any way to install all of Visual Studio 2010 Express to a drive besides C:?

  Read the article

• Working for a company vs starting my own? [closed]

  - by Mark

  I need some advice, I am considering going to grad school for CS. I have a few big projects I came up with on my own that I am extremely motivated to work on and complete and try to turn it into a career. I am currently completing an internship working for a big company, decent pay, 9-5 hours in an office. I feel like working for the same company many people would enjoy and like, is extremely boring in my opinion and procedural at times and kills my motivation. As a result, I am kind of unsure if I should continue to get my CS M.S. degree and start working for a big company? What I would enjoy doing most is working for myself and developing my own project, but I am not sure if I will be able to finanically support myself doing that and I do not want to miss out on a big opportuinities/ job offers to work for a company. With that being said, I will never know if my project will ever succeed if I don't give it %110 of my time and dedication, so if I decide to go that route and work on my own project, I will have to set everything else aside, If anyone could give me any advice on what they think about my situation?

  Read the article

• mysql is not using multiple cpus

  - by mhost

  Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

  Read the article

• itunes equalizer per track settings

  - by DA

  I'm a little confused about iTune's ability to set eq presets on a per-song basis. I have a song that I open, set to a given EQ preset, then close. When I play this song, however, the audio isn't being adjusted. If I open the EQ and turn it 'on', though, it then obeys the song's eq setting. Of course, if I leave the EQ on, then songs that do not have their own EQ setting default to whatever the EQ was originally set at. Not a HUGE deal, but it means that I would then normally have to have EQ always turned on, set to flat, so that any song that I HAVE given a EQ setting to will use it. Am I understanding how that works correctly? Is there a way to have individual songs use their EQ setting without having to turn on the EQ for everything?

  Read the article

• mysql is not using multiple cpus

  - by helpmhost

  Hi, Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

  Read the article

• Total network data sent/received of a non-daemon Linux process?

  - by leden

  I'm looking for a simple and effective way of measuring total bytes received/sent from a single process upon its termination. Basically, I am looking for a tool which has the interface similar to "time" and "/usr/bin/time", e.g. measure-net-data <prog_to_run> <prog_args> Received (b): XYZ Sent (b): ABC I know that there are many tools for bandwidth/network monitoring, but as far I can tell all of them are performing the measurements it real-time, which is inappropriate not only because of overhead but also because of the inconvenience - I would need to stop the program, capture the output of the tool and then kill it. I have seen that newer versions of Linux 2.6.20+ provide /proc/<pid>/io/ which contain the information I'm looking for; however, everything under /proc/<pid> when the process terminates, so I'm again back to the same problem as with any network monitoring tool.

  Read the article

• How to make a backup VPN server?

  - by akalenuk

  I have a small VPN network with a bunch of clients working mostly with each other and a VPN server. Everything works fine, except, obviously I can't shut VPN server down without breaking the network. I have a spare machine, which worked as an VPN server for the same network before so it is signed with the same SA as the first one and basically configured just the same as the first one. Technically I can make my clients work with it with little adjustment (by setting remote in etc/openpvn/clientx.conf), but it would be great make this switch automated. So basically I want two VPN servers running in the same network to work completely interchangeable without clients even knowing this. Can I do this with VPN or should I dig deeper into physical network layer?

  Read the article

• Occasional HDD Related Hangs

  - by diolemo

  I have an issue that seems to be disk related. Occasionally my system will block for 30 or so seconds and is mostly unresponsive. Those things already in memory requiring no disk access continue to function but those things requiring disk access (even small) hang. 30 seconds later everything is back to normal. I have 2 Samsung drives in RAID 0. I have 1 WD drive (has pagefile) I have an SSD used for caching (Intel Smart Response). This is a new install of Windows and the drives were fine in my old PC (~1 month ago). Has anyone experienced anything similar? Any suggestions to solve this one? Thanks in advance.

  Read the article

• List all documents (webparts) and sites using a certain solution in sharepoint 2007

  - by tnolan

  I would like to uninstall a Sharepoint application template (GroupBoard Workspace to be exact) but I want to make sure nothing currently relies on it. I don't see any functions within stsadm that will tell me this information and I have even tried SPM which would work, but with such a huge site it's tedious to go through every single web and page to see which features are in use. Is there a way (probably with SQL using the id from stsadm -o enumsolutions) to list everything that relies on a template within a given solution, including webparts on custom pages? If this is not possible, what is the best way to check dependencies prior to uninstalling a solution (especially since GBW is not the only one on my axe list.) Note: I know that stsadm -o deletesolution will stop me from removing something that is in use, but I want to see all of the things that are using a given solution.

  Read the article

• Service Pack 1 for Telerik Extensions for ASP.NET MVC just released

  We just released the first service pack for the Q1 2010 release of Telerik Extensions for ASP.NET MVC. As you may have guessed this is mostly a maintenance release addressing all reported bugfixes. It is important to note that the service pack will be available only to licensed users. We will update the open source version only for major releases. However if a critical bug has been found we will publish builds in the forum so no worries.   Whats new Everything is described in the release notes. There are a few breaking changes in the TreeView and Grid. Check here to see if you are affected: Grid changes and backwards compatibility TreeView changes and backwards compatibility We have also tested the extensions with Visual Studio 2010 to confirm we fully support it. The source and samples will continue to ship in Visual Studio 2008 projects though. Opening ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Restoring the Windows 7 boot loader after uninstalling Windows 8?

  - by ???

  A while back I installed Windows 8 Consumer Preview on my PC. As expected, I quickly grew bored of it, and uninstalled it. I removed the whole partition on which I had installed the OS, and everything seemed okay, until I rebooted. Whenever I reboot, I'm displayed with the Windows 8 boot loader (even though I deleted the whole partition it was on?), and I can't choose any operating system to boot into. It just says that there was an error. I did some research, and found out that I should use EasyBCD, but I'm not sure if I can burn it on to a CD and then boot from it? (I have only 700 MB CDs available) Or if there's another tool that I could burn on to a CD that would let me remove the Windows 8 boot loader, and just let me boot to Windows 7.

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >