Search Results

Search found 25660 results on 1027 pages for 'dotnetnuke development'.

Page 371/1027 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

  • Arbitrary Rotation about a Sphere

    - by Der
    I'm coding a mechanic which allows a user to move around the surface of a sphere. The position on the sphere is currently stored as theta and phi, where theta is the angle between the z-axis and the xz projection of the current position (i.e. rotation about the y axis), and phi is the angle from the y-axis to the position. I explained that poorly, but it is essentially theta = yaw, phi = pitch Vector3 position = new Vector3(0,0,1); position.X = (float)Math.Sin(phi) * (float)Math.Sin(theta); position.Y = (float)Math.Sin(phi) * (float)Math.Cos(theta); position.Z = (float)Math.Cos(phi); position *= r; I believe this is accurate, however I could be wrong. I need to be able to move in an arbitrary pseudo two dimensional direction around the surface of a sphere at the origin of world space with radius r. For example, holding W should move around the sphere in an upwards direction relative to the orientation of the player. I believe I should be using a Quaternion to represent the position/orientation on the sphere, but I can't think of the correct way of doing it. Spherical geometry is not my strong suit. Essentially, I need to fill the following block: public void Move(Direction dir) { switch (dir) { case Direction.Left: // update quaternion to rotate left break; case Direction.Right: // update quaternion to rotate right break; case Direction.Up: // update quaternion to rotate upward break; case Direction.Down: // update quaternion to rotate downward break; } }

    Read the article

  • How to create a "retro" pixel shader for transformed 2D sprites that maintains pixel fidelity?

    - by David Gouveia
    The image below shows two sprites rendered with point sampling on top of a background: The left skull has no rotation/scaling applied to it, so every pixel matches perfectly with the background. The right skull is rotated/scaled, and this results in larger pixels that are no longer axis aligned. How could I develop a pixel shader that would render the transformed sprite on the right with axis aligned pixels of the same size as the rest of the scene? This might be related to how sprite scaling was implemented in old games such as Monkey Island, because that's the effect I'm trying to achieve, but with rotation added. Edit As per kaoD's suggestions, I tried to address the problem as a post-process. The easiest approach was to render to a separate render target first (downsampled to match the desired pixel size) and then upscale it when rendering a second time. It did address my requirements above. First I tried doing it Linear -> Point and the result was this: There's no distortion but the result looks blurred and it loses most of the highlights colors. In my opinion it breaks the retro look I needed. The second time I tried Point -> Point and the result was this: Despite the distortion, I think that might be good enough for my needs, although it does look better as a still image than in motion. To demonstrate, here's a video of the effect, although YouTube filtered the pixels out of it: http://youtu.be/hqokk58KFmI However, I'll leave the question open for a few more days in case someone comes up with a better sampling solution that maintains the crisp look while decreasing the amount of distortion when moving.

    Read the article

  • Slick2D, Nifty GUI listeners problem

    - by Patokun
    I'm trying to get Nifty GUI to work with Slick2D. So far everything is going great, except that I can't seem to figure out how to properly interact with the GUI. I'm trying the example in the nifty manual http://sourceforge.n....0.pdf/download but it doesn't seem to entirely work. The Element controller is being called for bind(...), init(...) and onStartScreen() as it should, as I can see their println output, but the next() method isn't being called when I click on the GUI element that I assigned the controller to, nor the screen controller as no output from println is shown. What's weird is, that the player is moving, so the mouse input is working. It's supposed to be called when I click the mouse button on it from the in the XML. Here is my code: My Element controller: public class ElementController implements Controller { private Element element; @Override public void bind(Nifty nifty, Screen screen, Element element, Properties parameter, Attributes controlDefinitionAttributes) { this.element = element; System.out.println("bind() called for element: " + element); } @Override public void init(Properties parameter, Attributes controlDefinitionAttributes) { System.out.println("init() called for element: " + element); } @Override public void onStartScreen() { System.out.println("onStartScreen() alled for element: " + element); } @Override public void onFocus(boolean getFocus) { System.out.println("onFocus() called for element: " + element + ", with: " + getFocus); } @Override public boolean inputEvent(NiftyInputEvent inputEvent) { return false; } public void next() { System.out.println("next() clicked for element: " + element); } } MyScreenController: class MyScreenController implements ScreenController { public void bind(Nifty nifty, Screen screen) {} public void onEndScreen() {} public void onStartScreen() {} public void next() { System.out.println("next() called from MyScreenController"); } } And my XML file: <?xml version="1.0" encoding="UTF-8"?> <nifty xmlns="http://nifty-gui.sourceforge.net/nifty-1.3.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xsi:schemaLocation="http://niftygui.sourceforge.net/nifty-1.3.xsd http://nifty-gui.sourceforge.net/nifty-1.3.xsd"> <screen id="start" controller="predaN00b.theThing.V0004.MyScreenController"> <layer childLayout="center" controller="predaN00b.theThing.V0004.ElementController"> <panel width="100px" height="100px" childLayout="vertical" backgroundColor="#ff0f"> <text font="aurulent-sans-16.fnt" color="#ffff" text="Hello World!"> <interact onClick="next()" /> </text> </panel> </layer> </screen> </nifty> My main class, in case it's needed: public class MainGameState extends BasicGame { public Nifty nifty; public MainGame() { super("Test"); } public void init(GameContainer container, StateBasedGame game) throws SlickException { nifty = new Nifty(new SlickRenderDevice(container), new NullSoundDevice(), new PlainSlickInputSystem(), new AccurateTimeProvider()); nifty.addXml("/xml/MainState.xml"); nifty.gotoScreen("start"); } public void update(GameContainer container, StateBasedGame game, int delta) throws SlickException { nifty.update(); } public void render(GameContainer container, StateBasedGame game, Graphics graphics) throws SlickException { nifty.render(false); } public static void main(String[] args) throws SlickException { AppGameContainer app = new AppGameContainer(new MainGame()); app.setAlwaysRender(true); app.setDisplayMode( 1260 , 720, false); //window size app.start(); } }

    Read the article

  • How to properly render a Frame Buffer to the BackBuffer in Stage3D / AGAL

    - by bigp
    After doing a render pass with RenderToTarget (RTT), how do you properly render that texture buffer to the screen while maintaining original scale / proportions so it doesn't stretch or lose quality? Can an AGAL VertexShader & FragmentShader be written so it's adaptable to any Texture size and Viewport dimensions? I find I'm getting some "blocky" effects in some of my first attempts at "ping-ponging" between two Texture buffers (to create trailing effects). Perhaps I'm not using the UVs correctly between the rendering-to-target and/or the backbuffer? Is there a simpler way just to "splash" the texture on the backbuffer, or is a Quad absolutely necessary (4 vertices, 2 triangles)? If it needs the Quad, should the Texture buffer be fully drawn (0.0 to 1.0 for vertical and horizontal UVs), or only a percentage of it should, like the example below? Texture Buffer U: 0.0 to viewport.width/texturebuffer.width; Texture Buffer V: 0.0 to viewport.height/texturebuffer.height; Thanks!

    Read the article

  • Character progression through leveling, skills or items?

    - by Anton
    I'm working on a design for an RPG game, and I'm having some doubts about the skill and level system. I'm going for a more casual, explorative gaming experience and so thought about lowering the game complexity by simplifying character progression. But I'm having trouble deciding between the following: Progression through leveling, no complex skill progression, leveling increases base stats. Progression through skills, no leveling or base stat changes, skills progress through usage. Progression through items, more focus on stat-changing items, items confer skills, no leveling. However, I'm uncertain what the effects on gameplay might be in the end. So, my question is this: What would be the effects of choosing one of the above alternatives over the others? (Particularly with regards to the style and feel of the gameplay) My take on it is that the first sacrifices more frequent rewards and customization in favor of a simpler gameplay; the second sacrifices explicit customization and player control in favor of more frequent rewards and a somewhat simpler gameplay; while the third sacrifices inventory simplicity and a player metric in favor of player control, customization and progression simplicity. Addendum: I'm not really limiting myself to the above three, they are just the ones I liked most and am primarily interested in.

    Read the article

  • Low-level GPU code and Shader Compilation

    - by ktodisco
    Bear with me, because I will raise several questions at once. I still feel, though, that overall this can be treated as one question that may be answered succinctly. I recently dove into solidifying my understanding of the assembly language, low-level memory operations, CPU structure, and program optimizations. This also sparked my interest in how higher-level shading languages, GLSL and HLSL in particular, are compiled and optimized, as well as what formats they are reduced to before machine code is generated (assuming they are not converted directly into machine code). After a bit of research into this, the best resource I've found is this presentation from ATI about the compilation of and optimizations for HLSL. I also found sample ARB assembly code. This sort of addressed my original curiosity, but it raised several other questions. The assembler code in the ATI presentation seems like it contains instructions specifically targeted for the GPU, but is this merely a hypothetical example created for the purpose of conceptual understanding, or is this code really generated during shader compilation? If so, is it possible to inspect it, or even write it in place of the higher-level syntax? My initial searches for an answer to the last question tell me that this may be disallowed, but I have not dug too deep yet. Also, along the same lines, are GLSL shader programs compiled into ARB assembly code before machine code is generated, and is it possible to write direct ARB assembly? Lastly, and perhaps what I am most interested in finding out: are there comprehensive resources on shader compilation and low-level GPU code? I have been unable to find any thus far. I ask simply because I am curious :)

    Read the article

  • Network Multiplayer in Flash

    - by shadowprotocol
    Flash has come a long way in the last decade, and it's a well-kept secret getting a flash game to connect to a multi-client server for chat and/or basic avatar movement in real time. Why has the industry as a whole not made this a common-knowledge type of thing yet? We keep pushing to the web but I am finding it incredibly difficult gathering learning material on this subject. Sure, I can find multi-client server socket tutorials in various languages (using select statements and/or threads to handle multiple socket connections), but in regards to Flash applications inside of a browser? NOPE! Can everyone please share what they know? :] It's a subject I'd really love to get into but I'm afraid I just honestly don't know enough about how to do it. Thanks!

    Read the article

  • How to shoot a triangle out of an asteroid which floats all of the way up to the screen?

    - by Holland
    I currently have an asteroid texture loaded as my "test player" for the game I'm writing. What I'm trying to figure out how to do is get a triangle to shoot from the center of the asteroid, and keep going until it hits the top of the screen. What happens in my case (as you'll see from the code I've posted), is that the triangle will show, however it will either be a long line, or it will just be a single triangle which stays in the same location as the asteroid moving around (that disappears when I stop pressing the space bar), or it simply won't appear at all. I've tried many different methods, but I could use a formula here. All I'm trying to do is write a space invaders clone for my final in C#. I know how to code fairly well, my formulas just need work is all. So far, this is what I have: Main Logic Code protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(ClearOptions.Target, Color.Black, 1, 1); mAsteroid.Draw(mSpriteBatch); if (mIsFired) { mPositions.Add(mAsteroid.LastPosition); mRay.Fire(mPositions); mIsFired = false; mRay.Bullets.Clear(); mPositions.Clear(); } base.Draw(gameTime); } Draw Code public void Draw() { VertexPositionColor[] vertices = new VertexPositionColor[3]; int stopDrawing = mGraphicsDevice.Viewport.Width / mGraphicsDevice.Viewport.Height; for (int i = 0; i < mRayPos.Length(); ++i) { vertices[0].Position = new Vector3(mRayPos.X, mRayPos.Y + 5f, 10); vertices[0].Color = Color.Blue; vertices[1].Position = new Vector3(mRayPos.X - 5f, mRayPos.Y - 5f, 10); vertices[1].Color = Color.White; vertices[2].Position = new Vector3(mRayPos.X + 5f, mRayPos.Y - 5f, 10); vertices[2].Color = Color.Red; mShader.CurrentTechnique.Passes[0].Apply(); mGraphicsDevice.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.TriangleStrip, vertices, 0, 1); mRayPos += new Vector2(0, 1f); mGraphicsDevice.ReferenceStencil = 1; } }

    Read the article

  • How to Export Flash Animation Data

    - by charliep
    I'd love for my partner, the artist, to be able to animate using flash movieclips and timelines. Then I, the programmer, would like to read the raw Flash info and re-program it into my engine of choice (which happens to be Torque2D). The data I'd want is the bitmap images that were used in Flash, like the head and body the links between the images, like where the head connects to the body the motion data from the flash animation, like move, rotate (at what speed), shear, etc. for the head or arms or whatever. Is there any way to get this data? Here's what I know so far. There are tools like SWFSheet and Spriteloq that convert the entire flash animation into a frame by frame sprite animation (in a sprite sheet). This would take too much space in my case, so I'd like to avoid that. Re-animating on the fly would take much less texture memory. There is a PDF that describes the SWF file format but NOT the individual components like the movieclips. So anyone know of a library I can use, or how I can learn more about the movieclip components and whatnot? (more better tags: transform, export, convert)

    Read the article

  • Off center projection

    - by N0xus
    I'm trying to implement the code that was freely given by a very kind developer at the following link: http://forum.unity3d.com/threads/142383-Code-sample-Off-Center-Projection-Code-for-VR-CAVE-or-just-for-fun Right now, all I'm trying to do is bring it in on one camera, but I have a few issues. My class, looks as follows: using UnityEngine; using System.Collections; public class PerspectiveOffCenter : MonoBehaviour { // Use this for initialization void Start () { } // Update is called once per frame void Update () { } public static Matrix4x4 GeneralizedPerspectiveProjection(Vector3 pa, Vector3 pb, Vector3 pc, Vector3 pe, float near, float far) { Vector3 va, vb, vc; Vector3 vr, vu, vn; float left, right, bottom, top, eyedistance; Matrix4x4 transformMatrix; Matrix4x4 projectionM; Matrix4x4 eyeTranslateM; Matrix4x4 finalProjection; ///Calculate the orthonormal for the screen (the screen coordinate system vr = pb - pa; vr.Normalize(); vu = pc - pa; vu.Normalize(); vn = Vector3.Cross(vr, vu); vn.Normalize(); //Calculate the vector from eye (pe) to screen corners (pa, pb, pc) va = pa-pe; vb = pb-pe; vc = pc-pe; //Get the distance;; from the eye to the screen plane eyedistance = -(Vector3.Dot(va, vn)); //Get the varaibles for the off center projection left = (Vector3.Dot(vr, va)*near)/eyedistance; right = (Vector3.Dot(vr, vb)*near)/eyedistance; bottom = (Vector3.Dot(vu, va)*near)/eyedistance; top = (Vector3.Dot(vu, vc)*near)/eyedistance; //Get this projection projectionM = PerspectiveOffCenter(left, right, bottom, top, near, far); //Fill in the transform matrix transformMatrix = new Matrix4x4(); transformMatrix[0, 0] = vr.x; transformMatrix[0, 1] = vr.y; transformMatrix[0, 2] = vr.z; transformMatrix[0, 3] = 0; transformMatrix[1, 0] = vu.x; transformMatrix[1, 1] = vu.y; transformMatrix[1, 2] = vu.z; transformMatrix[1, 3] = 0; transformMatrix[2, 0] = vn.x; transformMatrix[2, 1] = vn.y; transformMatrix[2, 2] = vn.z; transformMatrix[2, 3] = 0; transformMatrix[3, 0] = 0; transformMatrix[3, 1] = 0; transformMatrix[3, 2] = 0; transformMatrix[3, 3] = 1; //Now for the eye transform eyeTranslateM = new Matrix4x4(); eyeTranslateM[0, 0] = 1; eyeTranslateM[0, 1] = 0; eyeTranslateM[0, 2] = 0; eyeTranslateM[0, 3] = -pe.x; eyeTranslateM[1, 0] = 0; eyeTranslateM[1, 1] = 1; eyeTranslateM[1, 2] = 0; eyeTranslateM[1, 3] = -pe.y; eyeTranslateM[2, 0] = 0; eyeTranslateM[2, 1] = 0; eyeTranslateM[2, 2] = 1; eyeTranslateM[2, 3] = -pe.z; eyeTranslateM[3, 0] = 0; eyeTranslateM[3, 1] = 0; eyeTranslateM[3, 2] = 0; eyeTranslateM[3, 3] = 1f; //Multiply all together finalProjection = new Matrix4x4(); finalProjection = Matrix4x4.identity * projectionM*transformMatrix*eyeTranslateM; //finally return return finalProjection; } // Update is called once per frame public void FixedUpdate () { Camera cam = camera; //calculate projection Matrix4x4 genProjection = GeneralizedPerspectiveProjection( new Vector3(0,1,0), new Vector3(1,1,0), new Vector3(0,0,0), new Vector3(0,0,0), cam.nearClipPlane, cam.farClipPlane); //(BottomLeftCorner, BottomRightCorner, TopLeftCorner, trackerPosition, cam.nearClipPlane, cam.farClipPlane); cam.projectionMatrix = genProjection; } } My error lies in projectionM = PerspectiveOffCenter(left, right, bottom, top, near, far); The debugger states: Expression denotes a `type', where a 'variable', 'value' or 'method group' was expected. Thus, I changed the line to read: projectionM = new PerspectiveOffCenter(left, right, bottom, top, near, far); But then the error is changed to: The type 'PerspectiveOffCenter' does not contain a constructor that takes '6' arguments. For reasons that are obvious. So, finally, I changed the line to read: projectionM = new GeneralizedPerspectiveProjection(left, right, bottom, top, near, far); And the error I get is: is a 'method' but a 'type' was expected. With this last error, I'm not sure what it is I should do / missing. Can anyone see what it is that I'm missing to fix this error?

    Read the article

  • AI Game Programming : Bayesian Networks, how to make efficient?

    - by Mahbubur R Aaman
    We know that AI is one of the most important part of Game Programming. Bayesian networks is one of the core part of AI at Game Programming. Bayesian networks are graphs that compactly represent the relationship between random variables for a given problem. These graphs aid in performing reasoning or decision making in the face of uncertainty. Here me, utilizing the monte carlo method and genetic algorithms. But tooks much time and sometimes crashes due to memory. Is there any way to implement efficiently?

    Read the article

  • How can I generate a navigation mesh for a tile grid?

    - by Roflha
    I haven't actually started programming for this one yet, but I wanted to see how I would go about doing this anyway. Say I have a grid of tiles, all of the same size, some traversable and some not. How would I go about creating a navigation mesh of polygons from this grid? My idea was to take the non-traversable tiles out and extend lines from there edges to make polygons... that's all I have got so far. Any advice?

    Read the article

  • How to implement a stack of game states in C++

    - by Lisandro Vaccaro
    I'm new to C++ and as a college proyect I'm building a 2D platformer with some classmates, I recently read that it's a good idea to have a stack of gamestates instead of a single global variable with the game state (which is what I have now) but I'm not sure how to do it. Currently this is my implementation: class GameState { public: virtual ~GameState(){}; virtual void handle_events() = 0; virtual void logic() = 0; virtual void render() = 0; }; class Menu : public GameState { public: Menu(); ~Menu(); void handle_events(); void logic(); void render(); }; Then I have a global variable of type GameState: GameState *currentState = NULL; And in my Main I define the currentState and call it's methods: int main(){ currentState = new Menu(); currentState.handle_events(); } How can I implement a stack or something similar to go from that to something like this: int main(){ statesStack.push(new Menu()); statesStack.getTop().handle_events(); }

    Read the article

  • How to improve batching performance

    - by user4241
    Hello, I am developing a sprite based 2D game for mobile platform(s) and I'm using OpenGL (well, actually Irrlicht) to render graphics. First I implemented sprite rendering in a simple way: every game object is rendered as a quad with its own GPU draw call, meaning that if I had 200 game objects, I made 200 draw calls per frame. Of course this was a bad choice and my game was completely CPU bound because there is a little CPU overhead assosiacted in every GPU draw call. GPU stayed idle most of the time. Now, I thought I could improve performance by collecting objects into large batches and rendering these batches with only a few draw calls. I implemented batching (so that every game object sharing the same texture is rendered in same batch) and thought that my problems are gone... only to find out that my frame rate was even lower than before. Why? Well, I have 200 (or more) game objects, and they are updated 60 times per second. Every frame I have to recalculate new position (translation and rotation) for vertices in CPU (GPU on mobile platforms does not support instancing so I can't do it there), and doing this calculation 48000 per second (200*60*4 since every sprite has 4 vertices) simply seems to be too slow. What I could do to improve performance? All game objects are moving/rotating (almost) every frame so I really have to recalculate vertex positions. Only optimization that I could think of is a look-up table for rotations so that I wouldn't have to calculate them. Would point sprites help? Any nasty hacks? Anything else? Thanks.

    Read the article

  • Rotate sprite to face 3D camera

    - by omikun
    I am trying to rotate a sprite so it is always facing a 3D camera. shaders->setUniform("camera", gCamera.matrix()); glm::mat4 scale = glm::scale(glm::mat4(), glm::vec3(5e5, 5e5, 5e5)); glm::vec3 look = gCamera.position(); glm::vec3 right = glm::cross(gCamera.up(), look); glm::vec3 up = glm::cross(look, right); glm::mat4 newTransform = glm::lookAt(glm::vec3(0), gCamera.position(), up) * scale; shaders->setUniform("model", newTransform); In the vertex shader: gl_Position = camera * model * vec4(vert, 1); The object will track the camera if I move the camera up or down, but if I rotate the camera around it, it will rotate in the other direction so I end up seeing its front twice and its back twice as I rotate around it 360. What am I doing wrong?

    Read the article

  • Drawing multiple Textures as tilemap

    - by DocJones
    I am trying to draw a 2d game map and the objects on the map in a single pass. Here is my OpenGL initialization code // Turn off unnecessary operations glDisable(GL_DEPTH_TEST); glDisable(GL_LIGHTING); glDisable(GL_CULL_FACE); glDisable(GL_STENCIL_TEST); glDisable(GL_DITHER); glEnable(GL_BLEND); glEnable(GL_TEXTURE_2D); // activate pointer to vertex & texture array glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); My drawing code is being called by a NSTimer every 1/60 s. Here is the drawing code of my world object: - (void) draw:(NSRect)rect withTimedDelta:(double)d { GLint *t; glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, [_textureManager textureByName:@"blocks"]); glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE); for (int x=0; x<[_map getWidth] ; x++) { for (int y=0; y<[_map getHeight] ; y++) { GLint v[] = { 16*x ,16*y, 16*x+16,16*y, 16*x+16,16*y+16, 16*x ,16*y+16 }; t=[_textureManager getBlockWithNumber:[_map getBlockAtX:x andY:y]]; glVertexPointer(2, GL_INT, 0, v); glTexCoordPointer(2, GL_INT, 0, t); glDrawArrays(GL_QUADS, 0, 4); } } } (_textureManager is a Singelton only loading a texture once!) The object drawing codes is identical (except the nested loops) in terms of OpenGL calls: - (void) drawWithTimedDelta:(double)d { GLint *t; GLint v[] = { 16*xpos ,16*ypos, 16*xpos+16,16*ypos, 16*xpos+16,16*ypos+16, 16*xpos ,16*ypos+16 }; glBindTexture(GL_TEXTURE_2D, [_textureManager textureByName:_textureName]); t=[_textureManager getBlockWithNumber:12]; glVertexPointer(2, GL_INT, 0, v); glTexCoordPointer(2, GL_INT, 0, t); glDrawArrays(GL_QUADS, 0, 4); } As soon as my central drawing routine calls the two drawing methods the second call overlays the first one. i would expect the call to world.draw to draw the map and "stamp" the objects upon it. Debugging shows me, that the first call is performed correctly (world is being drawn), but the following call to all objects ONLY draws the objects, the rest of the scene is getting black. I think i need to blend the drawn textures, but i cant seem to figure out how. Any help is appreciated. Thanks PS: Here is the github link to the project. It may not be in sync of my post here, but for some more in-depth analysis it may help.

    Read the article

  • Game server for an android/iOS turn-based board-game

    - by Cyril
    I am currently programming an iPhone game and I would like to create an online multiplayer mode. In the future, this app will be port to Android devices, so I was wondering how to create the game-server? First at all, which language should I choose? How to make a server able to communicate both with programs written in objective-c and Java? Then, how to effectively do it? Is it good if I open a socket by client (there'll be 2)? What kind of information should I send to the server? to the clients?

    Read the article

  • How to load stacking chunks on the fly?

    - by Brettetete
    I'm currently working on an infinite world, mostly inspired by minecraft. A Chunk consists of 16x16x16 blocks. A block(cube) is 1x1x1. This runs very smoothly with a ViewRange of 12 Chunks (12x16) on my computer. Fine. When I change the Chunk height to 256 this becomes - obviously - incredible laggy. So what I basically want to do is stacking chunks. That means my world could be [8,16,8] Chunks large. The question is now how to generate chunks on the fly? At the moment I generate not existing chunks circular around my position (near to far). Since I don't stack chunks yet, this is not very complex. As important side note here: I also want to have biomes, with different min/max height. So in Biome Flatlands the highest layer with blocks would be 8 (8x16) - in Biome Mountains the highest layer with blocks would be 14 (14x16). Just as example. What I could do would be loading 1 Chunk above and below me for example. But here the problem would be, that transitions between different bioms could be larger than one chunk on y. My current chunk loading in action For the completeness here my current chunk loading "algorithm" private IEnumerator UpdateChunks(){ for (int i = 1; i < VIEW_RANGE; i += ChunkWidth) { float vr = i; for (float x = transform.position.x - vr; x < transform.position.x + vr; x += ChunkWidth) { for (float z = transform.position.z - vr; z < transform.position.z + vr; z += ChunkWidth) { _pos.Set(x, 0, z); // no y, yet _pos.x = Mathf.Floor(_pos.x/ChunkWidth)*ChunkWidth; _pos.z = Mathf.Floor(_pos.z/ChunkWidth)*ChunkWidth; Chunk chunk = Chunk.FindChunk(_pos); // If Chunk is already created, continue if (chunk != null) continue; // Create a new Chunk.. chunk = (Chunk) Instantiate(ChunkFab, _pos, Quaternion.identity); } } // Skip to next frame yield return 0; } }

    Read the article

  • Correct level of abstraction for a 3d rendering component?

    - by JohnB
    I've seen lots of questions around this area but not this exact question so apologies if this is a duplicate. I'm making a small 3d game. Well to be honest, it's just a little hobby project and likely won't turn out to be an actual game, I'll be happy to make a nice graphics demo and learn about 3d rendering and c++ design. My intent is to use direct3d9 for rendering as I have some little experience of it, and it seems to meet my requirements. However if I've learned one thing as a programmer it's to ask "is there any conceivable reason that this component might be replaced by a different implmentation" and if the answer is yes then I need to design a proper abstraction and interface to that component. So even though I intend to implment d3d9 I need to design a 3d interface that could be implemented for d3d11, opengl... My question then is what level is it best to do this at? I'm thinking that an interface capable of creating and later drawing Vertex buffers and index buffers Textures Vertex and Pixel "shaders" Some representation of drawing state (blending modes etc...) In other words a fairly low level interface where my code to draw for example an animated model would use the interface to obtain abstract vertex buffers etc. I worry though that it's too low level to abstract out all the functionallity I need efficiently. The alternative is to do this at a higher level where the interface can draw objects, animations, landscapes etc, and implement them for each system. This seems like more work, but it more flexible I guess. So that's my question really, when abstracting out the drawing system, what level of interface works best?

    Read the article

  • Rotation of bitmap using a frame by frame animation

    - by pengume
    Hey every one I know this has probably been asked a ton of times but I just wanted to clarify if I am approaching this correctly, since I ran into some problems rotating a bitmap. So basically I have one large bitmap that has four frames drawn on it and I only draw one at a time by looping through the bitmap by increments to animate walking. I can get the bitmap to rotate correctly when it is not moving but once the animation starts it starts to cut off alot of the image and sometimes becomes very fuzzy. I have tried public void draw(Canvas canvas,int pointerX, int pointerY) { Matrix m; if (setRotation){ // canvas.save(); m = new Matrix(); m.reset(); // spriteWidth and spriteHeight are for just the current frame showed m.setTranslate(spriteWidth / 2, spriteHeight / 2); //get and set rotation for ninja based off of joystick m.preRotate((float) GameControls.getRotation()); //create the rotated bitmap flipedSprite = Bitmap.createBitmap(bitmap , 0, 0,bitmap.getWidth(),bitmap.getHeight() , m, true); //set new bitmap to rotated ninja setBitmap(flipedSprite); // canvas.restore(); Log.d("Ninja View", "angle of rotation= " +(float) GameControls.getRotation()); setRotation = false; } And then the Draw Method here // create the destination rectangle for the ninjas current animation frame // pointerX and pointerY are from the joystick moving the ninja around destRect = new Rect(pointerX, pointerY, pointerX + spriteWidth, pointerY + spriteHeight); canvas.drawBitmap(bitmap, getSourceRect(), destRect, null); The animation is four frames long and gets incremented by 66 (the size of one of the frames on the bitmap) for every frame and then back to 0 at the end of the loop.

    Read the article

  • Building a Flash Platformer

    - by Jonathan O
    I am basically making a game where the whole game is run in the onEnterFrame method. This is causing a delay in my code that makes debugging and testing difficult. Should programming an entire platformer in this method be efficient enough for me to run hundreds of lines of code? Also, do variables in flash get updated immediately? Are there just lots of threads listening at the same time? Here is the code... stage.addEventListener(Event.ENTER_FRAME, onEnter); function onEnter(e:Event):void { //Jumping if (Yoshi.y > groundBaseLevel) { dy = 0; canJump = true; onGround = true; //This line is not updated in time } if (Key.isDown(Key.UP) && canJump) { dy = -10; canJump = false; onGround = false; //This line is not updated in time } if(!onGround) { dy += gravity; Yoshi.y += dy; } //limit screen boundaries //character movement if (! Yoshi.hitTestObject(Platform)) //no collision detected { if (Key.isDown(Key.RIGHT)) { speed += 4; speed *= friction; Yoshi.x = Yoshi.x + movementIncrement + speed; Yoshi.scaleX = 1; Yoshi.gotoAndStop('Walking'); } else if (Key.isDown(Key.LEFT)) { speed -= 4; speed *= friction; Yoshi.x = Yoshi.x - movementIncrement + speed; Yoshi.scaleX = -1; Yoshi.gotoAndStop('Walking'); } else { speed *= friction; Yoshi.x = Yoshi.x + speed; Yoshi.gotoAndStop('Still'); } } else //bounce back collision detected { if(Yoshi.hitTestPoint(Platform.x - Platform.width/2, Platform.y - Platform.height/2, false)) { trace('collision left'); Yoshi.x -=20; } if(Yoshi.hitTestPoint(Platform.x, Platform.y - Platform.height/2, false)) { trace('collision top'); onGround=true; //This update is not happening in time speed = 0; } } }

    Read the article

  • Cocos2D 2.0 - masking a sprite

    - by Desperate Developer
    I have read this tutorial about how to mask sprites using Cocos2D 2.0. http://www.raywenderlich.com/4428/how-to-mask-a-sprite-with-cocos2d-2-0 But the author talks about OpenGL ES textures and vertices as they were common knowledge. My knowledge about OpenGl is zero raised to infinity. All I want is to use a rectangle to mask a sprite to it. How I would do in Photoshop using a rectangle as mask (yes, I want to clip a sprite to the rectangle bounds and no, I do not want to use the ClippingNode solution, that do not works for animation/scaling etc.). So, can you guys translate the klingon language used in this tutorial and tell how a solid rectangle can be used to mask a sprite in Cocos2D? I am desperate, as my username states. I am searching this for a week and have tried several solutions without satisfactory results. Please help me. Thanks!

    Read the article

  • How do I draw a scene with 2 nested frames

    - by Guido Granobles
    I have been trying for long time to figure out this: I have loaded a model from a directx file (I am using opengl and Java) the model have a hierarchical system of nested reference frames (there are not bones). There are just 2 frames, one of them is called x3ds_Torso and it has a child frame called x3ds_Arm_01. Each one of them has a mesh. The thing is that I can't draw the arm connected to the body. Sometimes the body is in the center of the screen and the arm is at the top. Sometimes they are both in the center. I know that I have to multiply the matrix transformation of every frame by its parent frame starting from the top to the bottom and after that I have to multiply every vertex of every mesh by its final transformation matrix. So I have this: public void calculeFinalMatrixPosition(Bone boneParent, Bone bone) { System.out.println("-->" + bone.name); if (boneParent != null) { bone.matrixCombined = bone.matrixTransform.multiply(boneParent.matrixCombined); } else { bone.matrixCombined = bone.matrixTransform; } bone.matrixFinal = bone.matrixCombined; for (Bone childBone : bone.boneChilds) { calculeFinalMatrixPosition(bone, childBone); } } Then I have to multiply every vertex of the mesh: public void transformVertex(Bone bone) { for (Iterator<Mesh> iterator = meshes.iterator(); iterator.hasNext();) { Mesh mesh = iterator.next(); if (mesh.boneName.equals(bone.name)) { float[] vertex = new float[4]; double[] newVertex = new double[3]; if (mesh.skinnedVertexBuffer == null) { mesh.skinnedVertexBuffer = new FloatDataBuffer( mesh.numVertices, 3); } mesh.vertexBuffer.buffer.rewind(); while (mesh.vertexBuffer.buffer.hasRemaining()) { vertex[0] = mesh.vertexBuffer.buffer.get(); vertex[1] = mesh.vertexBuffer.buffer.get(); vertex[2] = mesh.vertexBuffer.buffer.get(); vertex[3] = 1; newVertex = bone.matrixFinal.transpose().multiply(vertex); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[0])); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[1])); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[2])); } mesh.vertexBuffer = new FloatDataBuffer( mesh.numVertices, 3); mesh.skinnedVertexBuffer.buffer.rewind(); mesh.vertexBuffer.buffer.put(mesh.skinnedVertexBuffer.buffer); } } for (Bone childBone : bone.boneChilds) { transformVertex(childBone); } } I know this is not the more efficient code but by now I just want to understand exactly how a hierarchical model is organized and how I can draw it on the screen. Thanks in advance for your help.

    Read the article

  • Creating a new instance, C#

    - by Dave Voyles
    This sounds like a very n00b question, but bear with me here: I'm trying to access the position of my bat (paddle) in my pong game and use it in my ball class. I'm doing this because I want a particle effect to go off at the point of contact where the ball hits the bat. Each time the ball hits the bat, I receive an error stating that I haven't created an instance of the bat. I understand that I have to (or can use a static class), but I'm not sure of how to do so in this example. I've included both my Bat and Ball classes. namespace Pong { #region Using Statements using System; using System.Collections.Generic; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; #endregion public class Ball { #region Fields private readonly Random rand; private readonly Texture2D texture; private readonly SoundEffect warp; private double direction; private bool isVisible; private float moveSpeed; private Vector2 position; private Vector2 resetPos; private Rectangle size; private float speed; private bool isResetting; private bool collided; private Vector2 oldPos; private ParticleEngine particleEngine; private ContentManager contentManager; private SpriteBatch spriteBatch; private bool hasHitBat; private AIBat aiBat; private Bat bat; #endregion #region Constructors and Destructors /// <summary> /// Constructor for the ball /// </summary> public Ball(ContentManager contentManager, Vector2 ScreenSize) { moveSpeed = 15f; speed = 0; texture = contentManager.Load<Texture2D>(@"gfx/balls/redBall"); direction = 0; size = new Rectangle(0, 0, texture.Width, texture.Height); resetPos = new Vector2(ScreenSize.X / 2, ScreenSize.Y / 2); position = resetPos; rand = new Random(); isVisible = true; hasHitBat = false; // Everything to do with particles List<Texture2D> textures = new List<Texture2D>(); textures.Add(contentManager.Load<Texture2D>(@"gfx/particle/circle")); textures.Add(contentManager.Load<Texture2D>(@"gfx/particle/star")); textures.Add(contentManager.Load<Texture2D>(@"gfx/particle/diamond")); particleEngine = new ParticleEngine(textures, new Vector2()); } #endregion #region Public Methods and Operators /// <summary> /// Checks for the collision between the bat and the ball. Sends ball in the appropriate /// direction /// </summary> public void BatHit(int block) { if (direction > Math.PI * 1.5f || direction < Math.PI * 0.5f) { hasHitBat = true; particleEngine.EmitterLocation = new Vector2(aiBat.Position.X, aiBat.Position.Y); switch (block) { case 1: direction = MathHelper.ToRadians(200); break; case 2: direction = MathHelper.ToRadians(195); break; case 3: direction = MathHelper.ToRadians(180); break; case 4: direction = MathHelper.ToRadians(180); break; case 5: direction = MathHelper.ToRadians(165); break; } } else { hasHitBat = true; particleEngine.EmitterLocation = new Vector2(bat.Position.X, bat.Position.Y); switch (block) { case 1: direction = MathHelper.ToRadians(310); break; case 2: direction = MathHelper.ToRadians(345); break; case 3: direction = MathHelper.ToRadians(0); break; case 4: direction = MathHelper.ToRadians(15); break; case 5: direction = MathHelper.ToRadians(50); break; } } if (rand.Next(2) == 0) { direction += MathHelper.ToRadians(rand.Next(3)); } else { direction -= MathHelper.ToRadians(rand.Next(3)); } AudioManager.Instance.PlaySoundEffect("hit"); } /// <summary> /// JEP - added method to slow down ball after powerup deactivates /// </summary> public void DecreaseSpeed() { moveSpeed -= 0.6f; } /// <summary> /// Draws the ball on the screen /// </summary> public void Draw(SpriteBatch spriteBatch) { if (isVisible) { spriteBatch.Begin(); spriteBatch.Draw(texture, size, Color.White); spriteBatch.End(); // Draws sprites for particles when contact is made particleEngine.Draw(spriteBatch); } } /// <summary> /// Checks for the current direction of the ball /// </summary> public double GetDirection() { return direction; } /// <summary> /// Checks for the current position of the ball /// </summary> public Vector2 GetPosition() { return position; } /// <summary> /// Checks for the current size of the ball (for the powerups) /// </summary> public Rectangle GetSize() { return size; } /// <summary> /// Grows the size of the ball when the GrowBall powerup is used. /// </summary> public void GrowBall() { size = new Rectangle(0, 0, texture.Width * 2, texture.Height * 2); } /// <summary> /// Was used to increased the speed of the ball after each point is scored. /// No longer used, but am considering implementing again. /// </summary> public void IncreaseSpeed() { moveSpeed += 0.6f; } /// <summary> /// Check for the ball to return normal size after the Powerup has expired /// </summary> public void NormalBallSize() { size = new Rectangle(0, 0, texture.Width, texture.Height); } /// <summary> /// Check for the ball to return normal speed after the Powerup has expired /// </summary> public void NormalSpeed() { moveSpeed += 15f; } /// <summary> /// Checks to see if ball went out of bounds, and triggers warp sfx /// </summary> public void OutOfBounds() { // Checks if the player is still alive or not if (isResetting) { AudioManager.Instance.PlaySoundEffect("warp"); { // Used to stop the the issue where the ball hit sfx kept going off when detecting collison isResetting = false; AudioManager.Instance.Dispose(); } } } /// <summary> /// Speed for the ball when Speedball powerup is activated /// </summary> public void PowerupSpeed() { moveSpeed += 20.0f; } /// <summary> /// Check for where to reset the ball after each point is scored /// </summary> public void Reset(bool left) { if (left) { direction = 0; } else { direction = Math.PI; } // Used to stop the the issue where the ball hit sfx kept going off when detecting collison isResetting = true; position = resetPos; // Resets the ball to the center of the screen isVisible = true; speed = 15f; // Returns the ball back to the default speed, in case the speedBall was active if (rand.Next(2) == 0) { direction += MathHelper.ToRadians(rand.Next(30)); } else { direction -= MathHelper.ToRadians(rand.Next(30)); } } /// <summary> /// Shrinks the ball when the ShrinkBall powerup is activated /// </summary> public void ShrinkBall() { size = new Rectangle(0, 0, texture.Width / 2, texture.Height / 2); } /// <summary> /// Stops the ball each time it is reset. Ex: Between points / rounds /// </summary> public void Stop() { isVisible = true; speed = 0; } /// <summary> /// Updates position of the ball /// </summary> public void UpdatePosition() { size.X = (int)position.X; size.Y = (int)position.Y; oldPos.X = position.X; oldPos.Y = position.Y; position.X += speed * (float)Math.Cos(direction); position.Y += speed * (float)Math.Sin(direction); bool collided = CheckWallHit(); particleEngine.Update(); // Stops the issue where ball was oscillating on the ceiling or floor if (collided) { position.X = oldPos.X + speed * (float)Math.Cos(direction); position.Y = oldPos.Y + speed * (float)Math.Sin(direction); } } #endregion #region Methods /// <summary> /// Checks for collision with the ceiling or floor. 2*Math.pi = 360 degrees /// </summary> private bool CheckWallHit() { while (direction > 2 * Math.PI) { direction -= 2 * Math.PI; return true; } while (direction < 0) { direction += 2 * Math.PI; return true; } if (position.Y <= 0 || (position.Y > resetPos.Y * 2 - size.Height)) { direction = 2 * Math.PI - direction; return true; } return true; } #endregion } } namespace Pong { using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; using System; public class Bat { public Vector2 Position; public float moveSpeed; public Rectangle size; private int points; private int yHeight; private Texture2D leftBat; public float turbo; public float recharge; public float interval; public bool isTurbo; /// <summary> /// Constructor for the bat /// </summary> public Bat(ContentManager contentManager, Vector2 screenSize, bool side) { moveSpeed = 7f; turbo = 15f; recharge = 100f; points = 0; interval = 5f; leftBat = contentManager.Load<Texture2D>(@"gfx/bats/batGrey"); size = new Rectangle(0, 0, leftBat.Width, leftBat.Height); // True means left bat, false means right bat. if (side) Position = new Vector2(30, screenSize.Y / 2 - size.Height / 2); else Position = new Vector2(screenSize.X - 30, screenSize.Y / 2 - size.Height / 2); yHeight = (int)screenSize.Y; } public void IncreaseSpeed() { moveSpeed += .5f; } /// <summary> /// The speed of the bat when Turbo is activated /// </summary> public void Turbo() { moveSpeed += 8.0f; } /// <summary> /// Returns the speed of the bat back to normal after Turbo is deactivated /// </summary> public void DisableTurbo() { moveSpeed = 7.0f; isTurbo = false; } /// <summary> /// Returns the bat to the nrmal size after the Grow/Shrink powerup has expired /// </summary> public void NormalSize() { size = new Rectangle(0, 0, leftBat.Width, leftBat.Height); } /// <summary> /// Checks for the size of the bat /// </summary> public Rectangle GetSize() { return size; } /// <summary> /// Adds point to the player or the AI after scoring. Currently Disabled. /// </summary> public void IncrementPoints() { points++; } /// <summary> /// Checks for the number of points at the moment /// </summary> public int GetPoints() { return points; } /// <summary> /// Sets thedefault starting position for the bats /// </summary> /// <param name="position"></param> public void SetPosition(Vector2 position) { if (position.Y < 0) { position.Y = 0; } if (position.Y > yHeight - size.Height) { position.Y = yHeight - size.Height; } this.Position = position; } /// <summary> /// Checks for the current position of the bat /// </summary> public Vector2 GetPosition() { return Position; } /// <summary> /// Controls the bat moving up the screen /// </summary> public void MoveUp() { SetPosition(Position + new Vector2(0, -moveSpeed)); } /// <summary> /// Controls the bat moving down the screen /// </summary> public void MoveDown() { SetPosition(Position + new Vector2(0, moveSpeed)); } /// <summary> /// Updates the position of the AI bat, in order to track the ball /// </summary> /// <param name="ball"></param> public virtual void UpdatePosition(Ball ball) { size.X = (int)Position.X; size.Y = (int)Position.Y; } /// <summary> /// Resets the bat to the center location after a new game starts /// </summary> public void ResetPosition() { SetPosition(new Vector2(GetPosition().X, yHeight / 2 - size.Height)); } /// <summary> /// Used for the Growbat powerup /// </summary> public void GrowBat() { // Doubles the size of the bat collision size = new Rectangle(0, 0, leftBat.Width * 2, leftBat.Height * 2); } /// <summary> /// Used for the Shrinkbat powerup /// </summary> public void ShrinkBat() { // 1/2 the size of the bat collision size = new Rectangle(0, 0, leftBat.Width / 2, leftBat.Height / 2); } /// <summary> /// Draws the bats /// </summary> public virtual void Draw(SpriteBatch batch) { batch.Draw(leftBat, size, Color.White); } } }

    Read the article

  • Small adventure game

    - by Nick Rosencrantz
    I'm making a small adventure game where the player can walk through Dungeons and meet scary characters: The whole thing is 20 java classes and I'm making this a standalone frame while it could very well be an applet I don't want to make another applet since I might want to recode this in C/C++ if the game or game engine turns out a success. The engine is the most interesting part of the game, it controls players and computer-controlled characters such as Zombies, Reptile Warriors, Trolls, Necromancers, and other Persons. These persons can sleep or walk around in the game and also pick up and move things. I didn't add many things so I suppose that is the next thing to do is to add things that can get used now that I already added many different types of walking persons. What do you think I should add and do with things in the game? The things I have so far is: package adventure; /** * The data type for things. Subclasses will be create that takes part of the story */ public class Thing { /** * The name of the Thing. */ public String name; /** * @param name The name of the Thing. */ Thing( String name ) { this.name = name; } } public class Scroll extends Thing { Scroll (String name) { super(name); } } class Key extends Thing { Key (String name) { super(name); } } The key is the way to win the game if you figure our that you should give it to a certain person and the scroll can protect you from necromancers and trolls. If I make this game more Dungeons and Dragons-inspired, do you think will be any good? Any other ideas that you think I could use here? The Threadwhich steps time forward and wakes up persons is called simulation. Do you think I could do something more advanced with this class? package adventure; class Simulation extends Thread { private PriorityQueue Eventqueue; Simulation() { Eventqueue = new PriorityQueue(); start(); } public void wakeMeAfter(Wakeable SleepingObject, double time) { Eventqueue.enqueue(SleepingObject, System.currentTimeMillis()+time); } public void run() { while(true) { try { sleep(5); //Sov i en halv sekund if (Eventqueue.getFirstTime() <= System.currentTimeMillis()) { ((Wakeable)Eventqueue.getFirst()).wakeup(); Eventqueue.dequeue(); } } catch (InterruptedException e ) { } } } } And here is the class that makes up the actual world: package adventure; import java.awt.*; import java.net.URL; /** * Subklass to World that builds up the Dungeon World. */ public class DungeonWorld extends World { /** * * @param a Reference to adventure game. * */ public DungeonWorld(Adventure a) { super ( a ); // Create all places createPlace( "Himlen" ); createPlace( "Stairs3" ); createPlace( "IPLab" ); createPlace( "Dungeon3" ); createPlace( "Stairs5" ); createPlace( "C2M2" ); createPlace( "SANS" ); createPlace( "Macsal" ); createPlace( "Stairs4" ); createPlace( "Dungeon2" ); createPlace( "Datorsalen" ); createPlace( "Dungeon");//, "Ljushallen.gif" ); createPlace( "Cola-automaten", "ColaAutomat.gif" ); createPlace( "Stairs2" ); createPlace( "Fable1" ); createPlace( "Dungeon1" ); createPlace( "Kulverten" ); // Create all connections between places connect( "Stairs3", "Stairs5", "Down", "Up" ); connect( "Dungeon3", "SANS", "Down", "Up" ); connect( "Dungeon3", "IPLab", "West", "East" ); connect( "IPLab", "Stairs3", "West", "East" ); connect( "Stairs5", "Stairs4", "Down", "Up" ); connect( "Macsal", "Stairs5", "South", "Norr" ); connect( "C2M2", "Stairs5", "West", "East" ); connect( "SANS", "C2M2", "West", "East" ); connect( "Stairs4", "Dungeon", "Down", "Up" ); connect( "Datorsalen", "Stairs4", "South", "Noth" ); connect( "Dungeon2", "Stairs4", "West", "East" ); connect( "Dungeon", "Stairs2", "Down", "Up" ); connect( "Dungeon", "Cola-automaten", "South", "North" ); connect( "Stairs2", "Kulverten", "Down", "Up" ); connect( "Stairs2", "Fable1", "East", "West" ); connect( "Fable1", "Dungeon1", "South", "North" ); // Add things // --- Add new things here --- getPlace("Cola-automaten").addThing(new CocaCola("Ljummen cola")); getPlace("Cola-automaten").addThing(new CocaCola("Avslagen Cola")); getPlace("Cola-automaten").addThing(new CocaCola("Iskall Cola")); getPlace("Cola-automaten").addThing(new CocaCola("Cola Light")); getPlace("Cola-automaten").addThing(new CocaCola("Cuba Cola")); getPlace("Stairs4").addThing(new Scroll("Scroll")); getPlace("Dungeon3").addThing(new Key("Key")); Simulation sim = new Simulation(); // Load images to be used as appearance-parameter for persons Image studAppearance = owner.loadPicture( "Person.gif" ); Image asseAppearance = owner.loadPicture( "Asse.gif" ); Image trollAppearance = owner.loadPicture( "Loke.gif" ); Image necromancerAppearance = owner.loadPicture( "Necromancer.gif" ); Image skeletonAppearance = owner.loadPicture( "Reptilewarrior.gif" ); Image reptileAppearance = owner.loadPicture( "Skeleton.gif" ); Image zombieAppearance = owner.loadPicture( "Zombie.gif" ); // --- Add new persons here --- new WalkingPerson(sim, this, "Peter", studAppearance); new WalkingPerson(sim, this, "Zombie", zombieAppearance ); new WalkingPerson(sim, this, "Zombie", zombieAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "John", studAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Skeleton", skeletonAppearance ); new WalkingPerson(sim, this, "Sean", studAppearance ); new WalkingPerson(sim, this, "Reptile", reptileAppearance ); new LabAssistant(sim, this, "Kate", asseAppearance); new LabAssistant(sim, this, "Jenna", asseAppearance); new Troll(sim, this, "Troll", trollAppearance); new Necromancer(sim, this, "Necromancer", necromancerAppearance); } /** * * The place where persons are placed by default * *@return The default place. * */ public Place defaultPlace() { return getPlace( "Datorsalen" ); } private void connect( String p1, String p2, String door1, String door2) { Place place1 = getPlace( p1 ); Place place2 = getPlace( p2 ); place1.addExit( door1, place2 ); place2.addExit( door2, place1 ); } } Thanks

    Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >