Search Results

Search found 15344 results on 614 pages for 'layout manager'.

Page 514/614 | < Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• Formatting a a memory stick with two partitions?

  - by Marius

  I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. So, to summarize: I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.

  Read the article

• Public static ip for vagrant box

  - by Numbata

  I have server (Debian Squeeze) with 1 ethernet card and 2 public static IPs (188.120.245.4 and 188.120.244.5). What I want: Setup virtual box (Ubuntu) with access via static IP (188.120.244.5). What I was trying: config.vm.forward_port - good idea: setup interface "eth1:1" with 188.120.244.5 on host-machine, and add to Vagrant file "config.vm.forward_port = hmm..?" config.vm.network :hostonly, "188.120.244.5" - not working. Was created new interface on host-machine with ip "188.120.244.1". Of course 188.120.244.1 IP isn't mine and I can't access my server via this IP. config.vm.network :bridged - I'm confused how this works :) What I have now: Not working configuration. Debian-host-machine# cat Vagrantfile Vagrant::Config.run do |config| config.vm.define :gitlab do |box_config| box_config.vm.box = "ubuntu" box_config.vm.host_name = "ubuntu" box_config.vm.network :bridged box_config.vm.network :hostonly, "188.120.244.5", :auto_config => false end end Debian-host-machine# ifconfig eth1 Link encap:Ethernet HWaddr 00:15:17:69:71:bb inet addr:188.120.245.4 Bcast:188.120.247.255 Mask:255.255.248.0 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:188.120.244.1 Bcast:188.120.246.255 Mask:255.255.255.0 Ubuntu-virtual-machine# ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:ee:8d:0c inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 eth1 Link encap:Ethernet HWaddr 08:00:27:45:71:87 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 How I can access virtual box via public static IP from network? I'm using Oracle VM VirtualBox Manager 4.1.18 and Vagrant version 1.0.3. Thanks in advance for your feedback.

  Read the article

• Question about domain name registration

  - by Obay

  I received the following email from a certain [email protected] YYY is a company name ZZZ is OUR company name Dear Manager, We are a professional intellectual property rights consultant organization, mainly deal with the global domain name registration and internet intellectual property rights protection. On March. 24th, 2010, we formally received an application from YYY, they applied to register the internet brand “ZZZ” and some relevant domain names with our organization. During our preliminary investigation, we found that these domain names' keyword is fully identical with your trademark. Therefore, we need to confirm with you, whether you consigned YYY to register these domain names with us or not? Or, is YYY your business partner or distributor? If you have no relationship with this company, we assume that they have other purposes to obtain these domain names. Currently, we have already suspended this company's application temporarily due to the seriousness of this isuue. In order to avoid the vicious domain name grabbing, please let the relevant person make a confirmation with me via telephone or email as soon as possible. Thank you for your support to our work! Best Regards XXX Tel: xxxxx-xxxx xxxx Fax: xxxxx-xxxx xxxx Email: [email protected] www.world-wtc.cn This seems legit, or is it? By the way, XXX is just a first name, not a complete name.

  Read the article

• How to set up a serial connection to a Windows 7 computer

  - by oli_arborum

  I need to set up a "dial in" connection to a Windows 7 (Ultimate) computer via a serial null-modem cable to be able to connect from a Windows XP client to that computer and exchange data over IP. Question 1: How do I do that? I did neither find the information via Google nor in the MSDN. Seems like no one tried ever before... ;-) I already managed to install a legacy modem device called "Communications cable between two computers" and found the menu entry "New Incoming Connection..." in Network and Internet Network Connections. When I finish this wizard I get the message that the "Routing and Remote Access service" cannot be started. In the event viewer I see the following error messages: "The currently configured authentication provider failed to load and initialize successfully. The requested name is valid, but no data of the requested type was found." (Source: RemoteAccess, EventID: 20152) "The Routing and Remote Access service terminated with service-specific error The requested name is valid, but no data of the requested type was found." (Source: Service Control Manager, EventID: 7024) The Windows 7 installation is "naked", i.e. no additional software or services are installed. Question 2: Am I on the right path to set up the connection? Question 3: How can I get the Routing and Remote Access service running?

  Read the article

• DNS, subdomain, and IPv6 -- possible to add subdomain.example.com NS record to an IPv6 host?

  - by mpbloch

  example.com is listed with a registrar -- specifically, answerable.com. I want to host a subdomain in-house, specifically home.example.com. I am using an ipv6 gateway, specifically gogo6, to have a public IPv6 address. The IP address looks like 2001:xxxx:xx47. Then http://[2001:xxxx:xx47] goes to my test site (an instance of IIS7). I can add a quad-A record for my primary site -- home.example.com AAAA 2001:xxxx:xx47. Then http//home.example.com loads correctly. Must I add an A or quad-A record for all sub.home.example.com to my answerable.com DNS manager for example.com? Or can I delegate DNS queries to *.home.example.com to the machine at [2001:xxxx:xx47]? I have tried to add a AAAA record for tunnel.example.com to [2001:xxxx:xx47], and then add an NS entry for home.example.com to tunnel.example.com, but browsing then results in "DNS lookup error" from my browser. Is this a configurable scenario? Can DNS for subdomain only be delegated to IPv4 addresses?

  Read the article

• Error 550 Mail Relay Message Could Not Be Sent

  - by mraliks

  I'm not sure if this is the right area to ask, but here we go. I have a client who has a couple websites on a Windows server with MailEnable as the mail manager. Any emails being sent from the server work great, except when sending to some domains, the message does not go through due to the following error: 12/13/11 01:15:56 ME-I0026: [86476200E5834227A819E6E63E0EFDA2.MAI] Sending message 12/13/11 01:15:57 ME-IXXXX: [86476200E5834227A819E6E63E0EFDA2.MAI] Remote server returned a response indicating a permanent error. Server Response: (550 Relaying not allowed**) 12/13/11 01:15:57 ME-E0036: [86476200E5834227A819E6E63E0EFDA2.MAI] MAIL FROM command Failed. Can anyone give me some leads on how to correct the settings to allow emails to go through properly? In particular, the emails are not going through to a Network Solutions email account and Network Solutions has not been very helpful thus far. In addition, can a domain's DNS settings affect this error? Currently, the domains are hosted by Network Solutions and use the Network Solutions email service to send/receive email. The server is located with a different company and the Domains' DNS points to it. Which mail related DNS entries are allowed or not allowed in this scenario? Thanks

  Read the article

• IIS 6 + ASP.NET web service - DW20 and stackoverflow exception

  - by pcampbell

  Consider an ASP.NET SOAP web service that starts up fine, but craters hard when receiving its first hit. Please note that this is deployment works in the Test environment, but not in the PreProd environment. Both are Windows 2003 SP3 + IIS 6 + ASP.NET 3.5. All up-to-date. The behaviour that we're seeing is: restart the site & app pool the app pool is configured to run under Network Service. browsing to the .asmx and .wsdl responds normally, as expected. send a normal well-formed SOAP request / normal payload to the web service 100% CPU usage after 5 seconds, the page request / site returns "Service Unavailable" no entry is created in the IIS log file (i.e. c:\windows\system32\logfiles\W3C-foo) the app pool ends up being stopped The processes that hit the CPU hard are dw20.exe. I am unsure why Dr Watson is involved here. Event Log shows an ASP.NET Runtime error: Task Manager: Event log text: EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.3959, P3 45d6968e, P4 errormanagement, P5 1.0.0.0, P6 4b86a13f, P7 24, P8 0, P9 system.stackoverflowexception, P10 NIL. Questions Any thoughts on what this system.stackoverflow exception might be? Given that the code is the same between environments, might it be a payload problem? Could it be a configuration issue? You can see the name of my .NET assembly there in the exception message: "ErrorManagement"

  Read the article

• Apache2 Segmentation fault with wsgi_module

  - by a coder

  Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

  Read the article

• Xvnc4 started from xinetd only displays empty gray X screen

  - by scott8035

  I'm attempting to setup an Ubuntu 10.10 box so that anyone can connect to port 5900 and be greeted by the gdm login manager. To do so, I added a vnc entry in /etc/services and I am starting Xvnc4 using this xinetd config file: service vnc { protocol = tcp socket_type = stream wait = no user = nobody server = /usr/bin/Xvnc server_args = -geometry 1000x700 -depth 24 -broadcast -inetd -once -securitytypes None } This kind of works...I can start multiple sessions all to port 5900, and I get an X screen. The problem is that I only get an empty, gray X screen with no applications started. I know when you run vncserver from the command line it will look to your ~/.vnc/ directory for your passwd and xstartup files, and I think what I want to do is put "gnome-session" into the xstart file. However, which xstartup file? The running user is "nobody" who obviously doesn't have a ~/.vnc/ directory. I tried a /root/.vnc/xstartup file and a ~scott/.vnc/xstartup file and it doesn't look like they were even read. I changed the xinetd vnc service so that it would "strace" Xvnc4. I looked thru all the "open" lines and didn't get a clue as to what file it was trying to read for xstart. Can anyone help? I just want a terminal server where the user is presented with a gdm login screen.

  Read the article

• MySQL Workbench is not finding MySQL service? [closed]

  - by PhADDinTraining

  I set up a local MySQL server, currently with no databases. I'm trying to create a new server instance profile in MySQL Workbench to manage the server, and during the Create New Server Instance Profile wizard, it gets to the Windows Management section and tells me that No MySQL service found. I went into Task Manager and found the process mysqld.exe to be running, under the user name of NETWORK SERVICE. Then I went into the Services tab and found that MySQLServerName (I custom named the Windows service) is also there, and status is running. I ran cports and looked at what ports mysqld.exe is using, and ran a telnet command on that port. It's reporting that the port is being listened in on. I then ran the MySQL Command Line Client to be sure, and after \r it gives me a proper connection ID and a list of databases (NONE at this point). But with all this, I can't make the wizard find a running service. I've Googled this and found no answers, so please, if someone would help shed some light on this issue that'd be great!

  Read the article

• Any way to move Office Starter To-Go to a non-flash drive?

  - by Scott Bussinger

  Microsoft's Office Starter edition has an interesting option to create a portable version on a USB flash drive using the "Microsoft Office Starter To-Go Device Manager". This creates a portable version of the Word and Excel starter editions (limited versions of the normal applications that include ads). This would be great for use in Virtual Machines since it requires no registration and has a perpetual license. But I want to copy the files off of the flash drive and just store them in the VHD. The problem is that it appears when you try to run the office.exe executable from anywhere but the USB drive you get the error "Microsoft Office Starter To-Go cannot be launched because it is installed on an unsupported device." Any ideas what it is objecting to and is there a legal workaround for this? A limited but legal and portable version of Word and Excel is a great idea. But tying it specifically to a USB flash drive seems a bit odd. They don't seem to care how many of those flash drives you create so it's not clear what the restrictions are about.

  Read the article

• Selective Pointer device remapping in linux

  - by user6368

  I just got an HP 2710p (hp tablet, with digitizer), and I've played around with linux for a while now, and thought I would go ahead and install it. Everything works fine, excepting normal tablet functions, which is to be expected. I'm working on the screen rotation, and there are on-screen keyboards, etc, but I'm having issues with the stylus. I can tap and left click with the stylus as normal, but the side button (which in windows functions as a right mouse button) appears as a 'button 2' to xev (a middle/scroll wheel button). I can switch 'button 2' and 'button 3' universally using xmodmap, but I'd like to do so exclusively for stylus so I don't screw up regular pointing devices. Altering xorg.conf (which is surprisingly bare) with the recommended sections (adding sections for each of the stylus buttons) does nothing. I'm running crunchbang, which is an ubuntu/debian varient with openbox as the windows manager. Thanks Also, as a seperate note, does anybody know how to detect when I rotate and/or latch the lid shut? I was thinking maybe I could run a script to switch the buttons when I close it, but I can't find any information.

  Read the article

• How do I configure permissions for a cluster share using Powershell on 2008?

  - by Andrew J. Brehm

  I have a cluster resource of type "file share" but when I try to configure the "security" parameter I get the following error (excerpt): Set-ClusterParameter : Parameter 'security' does not exist on the cluster object Using cluster.exe I get a better result, namely the usual nothing when the command worked. But when I check in Failover Cluster Manager the permissions have not changed. In Server 2003 the cluster.exe method worked. Any ideas? Update: Entire command and error. PS C:\> $resource=get-clusterresource testshare PS C:\> $resource Name State Group ResourceType ---- ----- ----- ------------ testshare Offline Test File Share PS C:\> $resource|set-clusterparameter security "domain\account,grant,f" Set-ClusterParameter : Parameter 'security' does not exist on the cluster object 'testshare'. If you are trying to upda te an existing parameter, please make sure the parameter name is specified correctly. You can check for the current par ameters by passing the .NET object received from the appropriate Get-Cluster* cmdlet to "| Get-ClusterParameter". If yo u are trying to update a common property on the cluster object, you should set the property directly on the .NET object received by the appropriate Get-Cluster* cmdlet. You can check for the current common properties by passing the .NET o bject received from the appropriate Get-Cluster* cmdlet to "| fl *". If you are trying to create a new unknown paramete r, please use -Create with this Set-ClusterParameter cmdlet. At line:1 char:31 + $resource|set-clusterparameter <<<< security "domain\account,grant,f" + CategoryInfo : NotSpecified: (:) [Set-ClusterParameter], ClusterCmdletException + FullyQualifiedErrorId : Set-ClusterParameter,Microsoft.FailoverClusters.PowerShell.SetClusterParameterCommand

  Read the article

• SSL stops working on IIS7 after a reboot

  - by Mark Seemann

  I have a Windows 2008 Server with IIS7. Every time the server reboots, SSL stops working. Normal HTTP requests work fine, but any request to an HTTPS address gives the typical error message in the browser: Cannot find server or DNS I can temporarily fix it by opening IIS Manager and bring up the Bindings… window for the website in question. Then I select “https”, click on “Edit” then click “Ok” without making any changes to the settings. After doing this, browsing to https:// works again until the next reboot. This issue look as lot like the one described here, but according to the Certificates MMC snapin, the certificate in question does have a private key. I'm also pretty sure that I never installed the certificate in the personal store, but imported it straight into the machine store, but it's been a while... There's not a lot in the event log apart from the event ID 36870 also described in the post I linked to. Can anyone help me troubleshoot this issue so that SSL will work even after a server reboot?

  Read the article

• ASUS EAH5450 Graphics Card (ATI Radeon HD5450 - 1 GB DDR3) on Windows 2003? Anybody got it to work?

  - by JJarava

  Hi all! I've just bought an ASUS EAH5450 Graphics Card (ATI Radeon HD5450, 1 GB DDR3) for my main system, but I haven't been able to make it work under Windows 2003 (my OS in that system). When I plugged the card, I got a couple of "installing drivers" prompt for things such as "ATI High Definition Audio Device" that got themselves sorted out of the Internet, and then a "Standard VGA Graphics Adapter". The CD that came with the card installs something called "ATI Catalyst Install Manager" and .net 2.0, but no drivers. I've downloaded the latest (WinXP 32bits) drivers from ATI, and the experience is the same: I don't get any drivers installed. My Motherboard is an ASUS A8N-SLI with nVidia nForce 4 chipset (for an Athlon 64X2, somewhat old), but my previous card was an ATi Radeon X700, so it's been working with ATI cards before. On POST, during boot I see a "Display Card" Device (Vendor ID 1002-68F9-0300) and a "Multimedia Device" (1002-AA68-0403), and when viewing the properties of the "Standard VGA", they match the device ID. Any hints? I'd really hate having to get rid of the card, and I'm sure it's not that strange what I'm trying to do...

  Read the article

• URL sniffer/downloader

  - by Ricket

  Some websites have Flash content that plays music or videos. Most of the time they don't show you the URL of these music or videos, but for example, you can sniff a YouTube webpage and find the flv file that YouTube is actually requesting and playing. Right now I'm using Orbit Downloader, which has a feature called Grab++ that does just this; you start it, and then you refresh the page, and it shows you all files of certain types (image, audio, video) that the webpage requests, and then you can select one or more and download and it downloads them. But, I don't like Orbit, it installs plugins and has the whole download manager thing which I don't really want. What is a good alternative program? I'm not looking for websites like kickyoutube.com, I want a URL sniffer I guess. HTTPGuideDog used to be my Firefox add-on that did exactly this, but it hasn't been updated even to FF3 (and yes I know I can hack it to load anyway, I'm looking for something natively available preferably). I vaguely know of WireShark but last time I used it, I believe it captures individual packets, which is a little too fine-tuned for me. I just want to be able to see what's happening, and download something that the webpage downloaded. Oh, and I'm using Windows 7. Linux probably has some fancy command-line tool, but it just won't cut it for me. :-\ Edit: Oh, and something free please. Feel free to mention paid solutions though.

  Read the article

• Upgrade Nokia Maps from v2 to v3 fails

  - by ssollinger

  I'm trying to install Nokia Maps 3.0 on my Nokia N82, without much success. I believe other similar Nokia phones have the same problem. My phone is connected through USB in "PC Suite" mode, and the latest firmware available for N82 is installed. I currently have Maps 2.0 installed. I'm installing from a Windows XP PC, and tried the update first from within Ovi Suite (latest version) and from Nokia Maps Updater (latest version). In both cases it detects that there is an update available (Maps 3.0), downlowds it and starts the install. On my phone, I then get the following error message: Unable to install. Component is built in. And on the PC I get the error Error Cannot update maps application. The installation failed or was cancelled on the phone (18). I found an entry for Maps in the App. manager and deleted it (and turned phone off and on again afterwards), but this didn't make any difference (and I don't think it changed the version of Maps installed either). This is the release version of Maps 3.0, not the beta. I found the problem mentioned many times on various web sites, but couldn't find a solution anywhere. Has anybody any ideas how to get the upgrade from Maps 2.0 to Maps 3.0 to work?

  Read the article

• Where in the stack is Software Restriction Policies implemented?

  - by Knox

  I am a big fan of Software Restriction Policies for Microsoft Windows and was recently updating our settings for this. I became curious as to where Microsoft implemented this technology in the stack. I can imagine a very naive implementation being in Windows Explorer where when you double click on an exe or other blocked file type, that Explorer would check against the policy. I call this naive because obviously this wouldn't protect against someone typing something in a CMD window. Or worse, Adobe Reader running an external application. On the other hand, I can imagine that software restriction policies could be implemented deep in the stack almost at the metal. In this case, the low level loader would load into memory the questionable file, but mark the memory in the memory manager as non-executable data. I'm pretty sure that Microsoft did not do the most naive implementation, because if I block Java using a path block, Internet Explorer will crash if it attempts to load Java. Which is what I want. But I'm not sure how deep in the stack it's implemented and any insight would be appreciated.

  Read the article

• NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

  - by Corey Kennedy

  What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help!

  Read the article

• Where is the TFS database?

  - by Blanthor

  I've been using TFS 2010 with no problems. I tried adding a user and I got the following error message. "TF30063: You are not authorized to access <serverName>\DefaultCollection. -The remote server returned an error: (401) Unauthorized." I remoted into the server, <serverName>, and opened the TFS Console. The logs mentioned a connection string: ConnectionString: Data Source=<serverName>\SS2008;Initial Catalog=Tfs_DefaultCollection;Integrated Security=True While remoted in I open SQL Server 2008 Management Studio opening the (local) server with Windows Authentication. It shows the connection to be (local)(SQL Server 9.04.03 - <serverName>\Admin), and there is no Tfs_DefaultCollection database. Can someone tell me what is going on? Was I wrong in connecting to this instance of the database (i.e. Is the log file the wrong place to find the connection string)? Is the database so corrupted that SQL Manager Studio cannot see it anymore, although TFS could? Should I be logging into Management Studio as user SS2008? btw I don't know of any such credentials.

  Read the article

• Password-protected sharing allows access to users who have no account?

  - by romkyns

  Running Win7 on two computers in my LAN. Computer A has password-protected sharing enabled, and shares a folder. It has a single user account "Bob", and the Guest account is turned off. The network is workgroup-based. According to the descriptions of the "password-protected sharing" I could find, the only people who can access the shared folder via the LAN are those who know the username+password for the "Bob" account. However a second computer on the LAN is able to view this shared folder by simply browsing to Computer A. They don't need to enter any passwords or anything. The only user account registered on that PC is called "Jim", and has a different password from "Bob". How on earth is computer B able to view this shared folder? Is the popular description of the "password-protected sharing" feature inaccurate / did I misunderstand it big time? P.S. There is a possibility that the password for "Bob" has been entered on that PC once, and possibly the "remember password" box was checked. I've looked in the "Credential Manager" on both computers and there is nothing saved anywhere.

  Read the article

• Setting "Run WWW service in IIS 5.0 isolation mode" does not persist in IIS 6

  - by Saul Dolgin

  Our IIS server was recently patched with the latest Microsoft Security Updates and since then, I am unable to enable the "Run WWW service in IIS 5.0 isolation mode" setting. This setting was enabled prior to patching and somehow changed during the updates. I have tried both using the IIS Manager console and the adsutil.vbs approach to change it. Either way, after resetting IIS for the change to take effect, when I go to verify that the isolation mode setting is enabled (true) I find that is reverts back to being disabled (false). Now... The patches have already been rolled back, however the setting still does not persist when I enable it. While I am trying to research the patches that were applied to see if there is a known issue (or perhaps a change in this setting's behavior) I was hoping someone else might have come across the same problem. Any help towards a workaround would be greatly appreciated! >cscript adsutil.vbs set W3SVC/IIs5IsolationModeEnabled TRUE IIs5IsolationModeEnabled : (BOOLEAN) True >iisreset Attempting stop... Internet services successfully stopped Attempting start... Internet services successfully restarted >cscript adsutil.vbs get W3SVC/IIs5IsolationModeEnabled IIs5IsolationModeEnabled : (BOOLEAN) False

  Read the article

• Windows XP error message: "Windows cannot find 'explorer.exe'"

  - by Meysam

  In Windows XP I can open "My Computer" and see all the hard drives. I can also see the explorer.exe process running among other processes in Task Manager. But after opening "My Computer", when I double click on one of the drives to open it, I get the following error message: Windows cannot find 'explorer.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the start button, and then click search. Although I could detect and remove several suspicious files using Malwarebytes & Microsoft Security Essentials, the problem still remains. The interesting point is that if I right click on one folder and select Open or Explore from the menu bar, I can open the folder! but if I double click on the folder, it does not open and I get the above error message. How can I fix this problem? Any advice would be appreciated! Update: I formatted the C: drive (NTFS), a deep format, and installed a fresh Windows XP on it. I am not getting this error when I double click on C drive icon anymore. But the same error appears when I double click on other drive names. Maybe I should format them too!

  Read the article

• App-V Problems After SCCM 2007 SP2 Upgrade

  - by GAThrawn

  We're running an SCCM (MS System Centre Config Manager, successor to SMS) 2007 environment and delivering a number of applications to clients virtualized using App-V 4.5.1. The App-V apps are delivered by SCCM in Download-and-Execute, not streaming mode. The SCCM environment was recently service packed to SCCM 2007 SP2 (amongst other things this gives Win7 support). We also pushed out the updated SCCM clients to our workstations. This seems to have broken file associations for virtual apps for a large number of our users. The users can still open their App-V apps by finding the specific app on their Start Menu and clicking it's icon, but double-clicking an associated file in Explorer, or opening an email attachment gives the "This action is only valid for installed applications" error. There is a Technet blog entry from the App-V team talking about this issue "Upgrade to ConfigMgr 2007 SP2 may break App-V File Type Associations" but running the script there comes back saying "The User Interface option has been updated" but hasn't seemed to fix the problems for any of our users. Unfortunately the Technet blogs don't seem to have comments switched on so you can't see how this has worked out for other people. Anyone else had this problem, have you found any other way to fix it?

  Read the article

< Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >