Search Results

Search found 22668 results on 907 pages for 'command prompt'.

Page 614/907 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• Trixbox CentOS Default GW Problem (Multi-homed server)

  - by slashp

  I'm having an issue with a CentOS trixbox server which is dual-homed (one private facing NIC [eth1], one internet-facing NIC [eth0]). I can't seem to get the default gateway to set properly to our ISP's GW via eth0. I've modified the /etc/sysconfig/network to contain both a GATEWAY & GATEWAYDEV line and removed the GATEWAY line from /etc/sysconfig/network-scripts/ifcfg-eth1 (as well as /etc/sysconfig/network-scripts/ifcfg-eth0). No default GW shows up in the routing table unless it's specified in the ifcfg-eth1 file (which both the wrong interface and wrong gateway IP), otherwise, the routing table simply does not contain a default gateway..any ideas would be greatly appreciated! Thanks! EDIT Just realized when attempting to add the default gateway manually using the route add command, I receive an error stating: SIOCADDRT: Network is unreachable I know this error can occur when your default gateway and interface IP address are not on the same subnet..in this case, my public IP address of eth0 is a /29.

  Read the article

• Creating CNAME to delegated domain

  - by Starsky

  We are trying to configure F5 to do load balancing on 4 sub domains similar to this article... http://support.f5.com/kb/en-us/solutions/public/0000/200/sol277.html For Example prod.wip.example.com. NS F5NS1.example.com. prod.wip.example.com. NS F5NS2.example.com. test.wip.example.com. NS F5NS1.example.com. test.wip.example.com. NS F5NS2.example.com. Then we want to make cnames instead of delegating individual sub-domains, e.g. myapp.example.com CNAME prod.wip.example.com Microsoft DNS gives an error when I attempt to make the CNAME... dnscmd ns1 /recordadd example.com myapp CNAME myapp.prod.wip.example.com. Command failed: DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION 9563 (0000255b) The error makes perfect sense, but does anyone know of a way around it? Or are my NS records incorrect for this setup? Thank you, -Steve

  Read the article

• Access Methods to a computer Using MAC Address

  - by Dimal Chandrasiri

  I have my own wifi network at home & recently when I checked the active clients on the wifi I found out the there is one active client. Router shows the MAC address of this client and I want to Access this computer in order to let him know that he's doing a wrong thing. I dont intent to do any harm to his data. I just want to know a method to send him a message saying "Buy you own wifi". How can I achieve this using a windows 8 computer. Is there any specific softwares that I can use or will the netsend command do the trick! Thank you.

  Read the article

• Run a script after killing lxsession (xorg)

  - by user284194

  I am trying to run a program automatically within a bash script after killing the LXDE session. My script consists of: #!/bin/sh pkill lxsession; sh /home/pi/RetroPie/EmulationStation/emulationstation My aim is to log out of the LXDE session and run EmulationStation on my Raspberry Pi with a bash script. I'm using pkill lxsession; to bypass lxsession's logout confirmation dialog. As it stands, this script just gets me to the command line from a working LXDE desktop. Thanks for reading.

  Read the article

• How to get osx terminal.app and screen/vim scrolling to play nice?

  - by rustychains

  OSX 10.6.3 terminal.app Am a pretty dedicated screen user. Terminal.app line buffer and/or scroll does not seem to work for me. That is while in screen anything that goes past the top of the frame is gone, can't scroll back to. This seems to work ok in other terminal apps gnome, cygwin. Perhaps this is a shell env, config, or command? .screenrc: startup_message off autodetach on shell -$SHELL vbell off defutf8 on caption always caption string "%{= wk}%w" I have tried using defscrollback here with different values, but doesn't have an effect. some .bashrc settings: set -o physical export TERM=xterm-color shopt -s checkwinsize

  Read the article

• jungledisk 3.16 doesn't launch

  - by Angelo

  Has anyone had success with jungledisk 3.16 on ubuntu 11.10? I installed it from the .deb file provided by jungledisk. The install goes fine, but I can't get the "jungle disk desktop" app to launch. It appears in the dash search bar, but doesn't launch or do anything upon selecting it. When I try the command line, I get the following... me@myComputer:~$ jungledisk -V -f Verbose mode enabled Shutting down... me@myComputer:~$ What's the deal here? Anybody else experience this? Does anyone have suggestions for what to try? I opened up a help-ticket with jungledisk, but they just asked me for which ubuntu version and which gui I was using and then went silent. I've used jungledisk since 2008 and had no problems. It is sad that it is not working on the new ubuntu for me. Should I just quit them and use dropbox or one? (those seem to be working)

  Read the article

• Hosting Bazaar shared repositories

  - by Kishor Kundan

  What i want ? We operate in a small team of 9 people including developers, QA and designers. I want to setup a version control. We have a ubuntu (server edition) and i want to host all our repositories there. I have no understanding that even if it is possible. What I have done? We have setup bazaar on all distributions. We are using Bazaar explorer as our gui front-end. The command edition from console isn't very comfortable to all members. We have gone through the manual, but it hasn't been very helpful. Our inexperience being the cause. Team The designers are using windows distribution and developers & QA are using ubuntu distributions. I have googled around and i am really struggling to find a good tutorial for this setup. So any links/guides/leads towards accomplishing the same would be very helpful. While posting links or answer please do consider our inexperience. Thank you !!! cheers

  Read the article

• Add TOC to PDF from XML/JSON/file?

  - by Elias

  I currently have a PDF file without any ToC (for example, in Mac's Preview.app, I can't see the ToC in the sidebar). But I have the TOC in XML format, where there is a title and a pagenumber where that section starts. Is there any way I can add that TOC to my PDF file in a batch way? Since I have the TOC in XML, I can basically parse it in any possible way, so if there were a command line to add an TOC item to a PDF, I could also do that. Any ideas?

  Read the article

• wbadmin incremental system state backup

  - by user74513

  I am doing system state backups on a Windows Server 2008 R2 Enterprise (Service Pack 1) machine and expected the backups after the first one to be incremental. However with each backup a new directory with vhd files are created and the vhd files are almost the same size as the with the first backup. So the backups does not seem to be incremental. I used the following command to do the backup: wbadmin start systemstatebackup -backupTarget:f: I played around with the settings under "Configure Performance Settings" in the Windows Server Backup plugin in Server Manager but according to the description at the top of the dialog these settings are not applied to system state backups. Are there any settings available for wbadmin system state backup to make the backups incremental?

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• compile error in Ubuntu 10

  - by yozloy

  Hey guys I got a vps which run solusVM. I'm now trying to install ruby 1.9.2 in it. I follow this guide: after I run this command apt-get update apt-get -y install build-essential zlib1g zlib1g-dev libxml2 libxml2-dev libxslt-dev I got this error below root@makserver:/usr/local/src/ruby-1.9.2-p0# apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies... Done The following extra packages will be installed: libc6 Suggested packages: glibc-doc The following packages will be upgraded: libc6 1 upgraded, 0 newly installed, 0 to remove and 80 not upgraded. Need to get 0B/4252kB of archives. After this operation, 4096B disk space will be freed. Do you want to continue [Y/n]? y debconf: apt-extracttemplates failed: Bad file descriptor (Reading database ... 21594 files and directories currently installed.) Preparing to replace libc6 2.11.1-0ubuntu7.2 (using .../libc6_2.11.1-0ubuntu7.8_amd64.deb) ... open2: fork failed: Cannot allocate memory at /usr/share/perl5/Debconf/ConfModule.pm line 59 dpkg: error processing /var/cache/apt/archives/libc6_2.11.1-0ubuntu7.8_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 12 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.11.1-0ubuntu7.8_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Anybody can tell me how can I correct this. Thanks

  Read the article

• Win7 OpenSSH config: no address associated with name

  - by Jonah

  I am using OpenSSH on win7. My home dir is C:\Users\JG, and inside that dir I have the file C:\Users\JG\.ssh\config, with these contents: Host <redacted server ip here> HostName digitalocean_git User git IdentityFile ~/.ssh/digitalocean_moocho/id_rsa The id file pointed to by the "IdentityFile" entry works, as I use it just fine via putty, but for this problem I am trying to get command line OpenSSH working. The crux of the problem is explained by this output: >ssh -v digitalocean_git OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Reading configuration data /c/Users/JG/.ssh/config ssh: digitalocean_git: no address associated with name Why is no address associated with the name? How can I make this work?

  Read the article

• Drive Shows No Files But Half Space Gone

  - by Chance Robertson

  I have a 500 GB USB drive. When I go to Windows Explorer or Finder, the drive shows that about half the drive is free. However, when I open either drive in Windows 7 or OS X, no files how up. I have tried to look at the files through the command line and nothing shows. A while back, I hooked it up to my MacBookPro and there was a quick message that said the drive was not ejected properly, blah, blah. And of course I did not read the message and hit OK. It there any way to get back my files from the drive?

  Read the article

• NIC disabled in AWS instance

  - by Elad Lachmi

  Nothing makes you feel dumber than disabling a NIC while in RDP, but here I am :) I have mounted the volume on another instance and tried editing the registry. I have tried enabling auto logon and using runonce to run a netsh command to enable the NIC, but that does not work. I read something about enabling the NIC through the registry directly, but have had no luck in doing this. Has anyone dealt with this type of issue? I'm going nuts! Thank you!

  Read the article

• Using Terminal Services 'query' in batch file

  - by dboarman-FissureStudios

  I have a batch file that checks several of our servers for a user. From the command: query user %userID% /server:ServerName I want to capture the output before it goes to the screen. Is there a way to redirect the output to a variable? The basic gist of what I want to accomplish is this - we iterate through our servers: query user %userID% /server:Server1 query user %userID% /server:Server2 query user %userID% /server:Server3 query user %userID% /server:Server4 Instead of outputting a message that the user could not be found on a specific server, I would like for it to only notify me if it finds the user on a server.

  Read the article

• Can't connect to YouTube from specific network

  - by Tyilo

  Using my current network, I am unable to connect to http://www.youtube.com/. It doesn't matter what browser I use or if I use a cli-command (wget, curl). Error in Google Chrome: Oops! Google Chrome could not connect to www.youtube.com Error using curl: curl: (7) couldn't connect to host If I use nslookup to get the IP-address of YouTube, I get 173.194.32.32. If I go to http://173.194.32.32/ in my browser it can connect, but as Google is probably checking the Host HTTP-header, it shows Google's frontpage instead. There is no blocked websites on the router and other devices on the network seems to work. My computer only has this problem on this specific network. I am using Mac OS X 10.8.2 on a MacBook (mid 2009).

  Read the article

• Coda-like experience for Ubuntu

  - by Dillon Gilmore

  I'm a web developer who's going to transition from using Mac OS X to Ubuntu. I've been using Coda for some time, only because it makes web development easy. I know a full fledged app isn't available for Linux, but would like to know about apps that specialize in the same tasks that Coda offers. I plan on switching to Vim for code editing, I'm extremely proficient and will install the Janus plugin and be good to go for editing code. One thing that makes editing on Coda so amazing is its extremely good at SFTP, you can drag and drop files and/or folders from your local drive to the server. Also, you can edit code directly on the server. The problem here, is that using Vim I don't know of a way to edit code on a remote server, while using my own Vim settings and plugins. To solve this, I would like to know of a good SFTP client OR a good SFTP CLI. A CLI that could synchronize your files after a file has been modified would be perfect, but not necessary. Now, one of the biggest and best features of Coda is its ability to view your databases. You get to create a database, create tables, add stuff, delete stuff and view the contents of the table (all this without writing a single SQL statement). I will admit that databases are my weak point, but is a very important part of my job. If there is a tool that specializes in databases would be perfect. I wouldn't prefer to use the command line for database stuff, but if there is a CLI for databases that I'm missing could potentially be useful. So I guess I'm asking for two things. A tool that makes databases easier to visualize and a tool that assists in pushing my local code to a server.

  Read the article

• Can I make ssh tell me which control file it would use for multiplexing?

  - by Ryan Thompson

  I am using the following options in my ~/.ssh/config in order to enable connection multiplexing: ControlMaster auto ControlPath ~/.ssh/control/master-%r@%h:%p However, this has the annoying problem that the first shell to connect to a particular server must be the last to disconnect, because it is the master connection that all the other connections are using. So if you log out of the master, it appears to just hang. To solve this, I would like to wrap ssh with a script that checks if the control master file exists, and if not, starts a master ssh process in the background. Then it would start a slave ssh session. In order to accomplish this, my script would have to determine the path to the control file that ssh would use. This would entail parsing the ssh command line options and config files and implementing the logic for determining the ControlPath. Is there any way to just ask ssh what path it would use, so I can check it?

  Read the article

• How to run "mongodb --repair" if it's an Upstart job?

  - by Wolfram Arnold

  My MongoDB server died. The log says something about an unclean shutdown and an existing mongodb.lock file. It recommends to remove the lock file, then restart the mongodb server with --repair. However, on my system (Ubuntu 10.10), I've installed MongoDB via an apt-get package, and it's set up as Upstart job. If I run mongodb from the command line, it won't find the data, none of the paths are set correctly. Surely, I could read the man page, try to emulate what Upstart would do, give it all the correct parameters plus --repair but that seems like a lot of trouble. There must be a simpler way, that's not fighting Upstart. What is it?

  Read the article

• Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

  - by Thunder

  I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

  Read the article

• Thunderbird: moving email from local Junk folder to IMAP folder yields "Message contains invalid header"

  - by Peltier

  Whenever I try to move an email from a local Junk folder to an IMAP folder in Thunderbird, I get the following error message: The current command did not succeed. The mail server responded: Message contains invalid header If Thunderbird's Junk folder is an IMAP folder on the server, then after Thunderbird has moved messages to that folder, I can successfully move messages from Junk back into to some other IMAP folder. However, if the Junk folder is not on the server, then moving a message from the local Junk folder to an IMAP folder yields the aforementioned error. The only interesting thing I've found about this error is "Message contains invalid header" from the MozillaZine Knowledge Base. That article officially is about importing folders from another email client, and does not mention the Junk filter as another possible cause. However the proposed solution is not very helpful since it requires manual editing of the message box files. Any better ideas? EDIT: make sure you read the comments before answering the question.

  Read the article

• Unix: Sync directory with FTP or SFTP directory

  - by Svish

  I have a website on my local computer running Mac OS X. I am wondering if there is any built-in command that I can run in the Terminal that will upload that website to my webserver either through FTP or, if possible, SFTP. Installing new commands through MacPorts is also a possibility. A big bonus would be that it only uploaded the files that needs to be updated and not everything else. It would also be nice if I can tell it to delete the files on the server that no longer exists locally once in a while. Any good tips?

  Read the article

• What are the common mistakes in 'tailored Scrum approaches'?

  - by Clark Gable

  I have seen this before. Management wants to be agile and be scrummified, but does not want to step out of the status quo. My latest observation is no different; here, the Scrum is 'tailored' to the organization; specifically into a weird many-people-process. The diagram showing the different participants. I am putting together a document listing why this will not work. Here are the obvious ones: 1. There are product owner agents (an obvious WTF), who report to the product owner: causing dilution of decision making capability 2. There is a role that looks similar to a manager in the traditional approach - development manager: an obvious attempt at command-and-control model 3. The ScrumMaster's role includes collecting timesheets, which are used to track progress instead of burndown charts: detrimental to agile's efforts to build teams with motivated individuals Leaving the question "how would you convince the management?", my question is more at, "what else do you see as failures in this/similar 'tailored Scrum approaches'? EDIT: The diagram might use a few more details 1. The development manager is not part of the development team, with not very clearly defined responsibilities, except: developer performance assessemnt, recruitment, etc., 2. There are more than two teams (with ScrumMaster+development manager+dev team) with the same product owner for all teams!

  Read the article

• PowerShell Remoting: No credentials are available in the security package

  - by TheSciz

  I'm trying to use the following script: $password = ConvertTo-SecureString "xxxx" -AsPlainText -Force $cred = New-Object System.Management.Automation.PSCredential("domain\Administrator", $password) $session = New-PSSession 192.168.xxx.xxx -Credential $cred Invoke-Command -Session $session -ScriptBlock { New-Cluster -Name "ClusterTest" -Node HOSTNAME } To remotely create a cluster (it's for testing purposes) on a Windows Server 2012 VM. I'm getting the following error: An error occurred while performing the operation. An error occurred while creating the cluster 'ClusterTest'. An error occurred creating cluster 'ClusterTest'. No credentials are available in the security package + CategoryInfo : NotSpecified: (:) [New-Cluster], ClusterCmdletException + FullyQualifiedErrorId : New-Cluster,Microsoft.FailoverClusters.PowerShell.NewClusterCommand All of my other remote commands (installing/making changes to DNS, DHCP, NPAS, GP, etc) work without an issue. Why is this one any different? The only difference is in the -ScriptBlock tag. Help!

  Read the article

• No free disk space ;[

  - by skomak

  Hi I have weird situation because Linux df command says that there is no free disk space [root@backup cache]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 72G 70G 0 100% / /dev/sda1 190M 11M 170M 7% /boot tmpfs 248M 0 248M 0% /dev/shm but du -sh /* says [root@backup cache]# du -sh /* 4.0K /bacula-restores 7.4M /bin 5.4M /boot 3.6T /data 116K /dev 55M /etc 204K /home 76M /lib 16K /lost+found 12K /media 0 /misc 16K /mnt 8.0K /mount 0 /net 8.0K /opt 0 /proc 2.3G /root 32M /sbin 8.0K /selinux 168K /share 8.0K /srv 0 /sys 361M /test 20K /tmp 3.2G /usr 1.5G /var Could you tell me where is a problem? Where is my space? I can't figure it out :(

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >