Search Results

Search found 18244 results on 730 pages for 'controller action'.

Page 690/730 | < Previous Page | 686 687 688 689 690 691 692 693 694 695 696 697  | Next Page >

  • European Interoperability Framework - a new beginning?

    - by trond-arne.undheim
    The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

    Read the article

  • Responsive Inline Elements with Twitter Bootstrap

    - by MightyZot
    Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/12/responsive-inline-elements-with-twitter-bootstrap.aspxTwitter Boostrap is a responsive css platform created by some dudes affiliated with Twitter and since supported and maintained by an open source following. I absolutely love the new version of this css toolkit. They rebuilt it with a mobile first strategy and it’s very easy to layout pages once you get the hang of it. Using a css / javascript framework like bootstrap is certainly much easier than coding your layout by hand. And, you get a “leg up” when it comes to adding responsive features to your site. Bootstrap includes column layout classes that let you specify size and placement based upon the viewport width. In addition, there are a handful of responsive helpers to hide and show content based upon the user’s device size. Most notably, the visible-xs, visible-sm, visible-md, and visible-lg classes let you show content for devices corresponding to those sizes (they are listed in the bootstrap docs.) hidden-xs, hidden-sm, hidden-md, and hidden-lg let you hide content for devices with those respective sizes. These helpers work great for showing and hiding block elements. Unfortunately, there isn’t a provision yet in Twitter Bootstrap (as of the time of this writing) for inline elements. We are using the navbar classes to create a navigation bar at the top of our website, www.crowdit.com. When you shrink the width of the screen to tablet or phone size, the tools in the navbar are turned into a drop down menu, and a button appears on the right side of the navbar. This is great! But, we wanted different content to display based upon whether the items were on the navbar versus when they were in the dropdown menu. The visible-?? and hidden-?? classes make this easy for images and block elements. In our case, we wanted our anchors to show different text depending upon whether they’re in the navbar, or in the dropdown. span is inherently inline and it can be a block element. My first approach was to create two anchors for each options, one set visible when the navbar is on a desktop or laptop with a wide display and another set visible when the elements converted to a dropdown menu. That works fine with the visible-?? and hidden-?? classes, but it just doesn’t seem that clean to me. I put up with that for about a week…last night I created the following classes to augment the block-based classes provided by bootstrap. .cdt-hidden-xs, .cdt-hidden-sm, .cdt-hidden-md, .cdt-hidden-lg {     display: inline !important; } @media (max-width:767px) {     .cdt-hidden-xs, .cdt-hidden-sm.cdt-hidden-xs, .cdt-hidden-md.cdt-hidden-xs, .cdt-hidden-lg.cdt-hidden-xs {         display: none !important;     } } @media (min-width:768px) and (max-width:991px) {     .cdt-hidden-xs.cdt-hidden-sm, .cdt-hidden-sm, .cdt-hidden-md.cdt-hidden-sm, .cdt-hidden-lg.cdt-hidden-sm {         display: none !important;     } } @media (min-width:992px) and (max-width:1199px) {     .cdt-hidden-xs.cdt-hidden-md, .cdt-hidden-sm.cdt-hidden-md, .cdt-hidden-md, .cdt-hidden-lg.cdt-hidden-md {         display: none !important;     } } @media (min-width:1200px) {     .cdt-hidden-xs.cdt-hidden-lg, .cdt-hidden-sm.cdt-hidden-lg, .cdt-hidden-md.cdt-hidden-lg, .cdt-hidden-lg {         display: none !important;     } } .cdt-visible-xs, .cdt-visible-sm, .cdt-visible-md, .cdt-visible-lg {     display: none !important; } @media (max-width:767px) {     .cdt-visible-xs, .cdt-visible-sm.cdt-visible-xs, .cdt-visible-md.cdt-visible-xs, .cdt-visible-lg.cdt-visible-xs {         display: inline !important;     } } @media (min-width:768px) and (max-width:991px) {     .cdt-visible-xs.cdt-visible-sm, .cdt-visible-sm, .cdt-visible-md.cdt-visible-sm, .cdt-visible-lg.cdt-visible-sm {         display: inline !important;     } } @media (min-width:992px) and (max-width:1199px) {     .cdt-visible-xs.cdt-visible-md, .cdt-visible-sm.cdt-visible-md, .cdt-visible-md, .cdt-visible-lg.cdt-visible-md {         display: inline !important;     } } @media (min-width:1200px) {     .cdt-visible-xs.cdt-visible-lg, .cdt-visible-sm.cdt-visible-lg, .cdt-visible-md.cdt-visible-lg, .cdt-visible-lg {         display: inline !important;     } } I created these by looking at the example provided by bootstrap and consolidating the styles. “cdt” is just a prefix that I’m using to distinguish these classes from the block-based classes in bootstrap. You are welcome to change the prefix to whatever feels right for you. These classes can be applied to spans in textual content to hide and show text based upon the browser width. Applying the styles is simple… <span class=”cdt-visible-xs”>This text is visible in extra small</span> <span class=”cdt-visible-sm”>This text is visible in small</span> Why would you want to do this? Here are a couple of examples, shown in screen shots. This is the CrowdIt navbar on larger displays. Notice how the text is two line and certain words are capitalized? Now, check this out! Here is a screen shot showing the dropdown menu that’s displayed when the browser window is tablet or phone sized. The markup to make this happen is quite simple…take a look. <li>     <a href="@Url.Action("what-is-crowdit","home")" title="Learn about what CrowdIt can do for your Small Business">         <span class="cdt-hidden-xs">WHAT<br /><small>is CrowdIt?</small></span>         <span class="cdt-visible-xs">What is CrowdIt?</span>     </a> </li> There is a single anchor tag in this example and only the spans change visibility based on browser width. I left them separate for readability and because I wanted to use the small tag; however, you could just as easily hide the “WHAT” and the br tag on small displays and replace them with “What “, consolidating this even further to text containing a single span. <span class=”cdt-hidden-xs”>WHAT<br /></span><span class=”cdt-visible-xs”>What </span>is CrowdIt? You might be a master of css and have a better method of handling this problem. If so, I’d love to hear about your solution…leave me some feedback! You’ll be entered into a drawing for a chance to win an autographed picture of ME! Yay!

    Read the article

  • Changing an HTML Form's Target with jQuery

    - by Rick Strahl
    This is a question that comes up quite frequently: I have a form with several submit or link buttons and one or more of the buttons needs to open a new Window. How do I get several buttons to all post to the right window? If you're building ASP.NET forms you probably know that by default the Web Forms engine sends button clicks back to the server as a POST operation. A server form has a <form> tag which expands to this: <form method="post" action="default.aspx" id="form1"> Now you CAN change the target of the form and point it to a different window or frame, but the problem with that is that it still affects ALL submissions of the current form. If you multiple buttons/links and they need to go to different target windows/frames you can't do it easily through the <form runat="server"> tag. Although this discussion uses ASP.NET WebForms as an example, realistically this is a general HTML problem although likely more common in WebForms due to the single form metaphor it uses. In ASP.NET MVC for example you'd have more options by breaking out each button into separate forms with its own distinct target tag. However, even with that option it's not always possible to break up forms - for example if multiple targets are required but all targets require the same form data to the be posted. A common scenario here is that you might have a button (or link) that you click where you still want some server code to fire but at the end of the request you actually want to display the content in a new window. A common operation where this happens is report generation: You click a button and the server generates a report say in PDF format and you then want to display the PDF result in a new window without killing the content in the current window. Assuming you have other buttons on the same Page that need to post to base window how do you get the button click to go to a new window? Can't  you just use a LinkButton or other Link Control? At first glance you might think an easy way to do this is to use an ASP.NET LinkButton to do this - after all a LinkButton creates a hyper link that CAN accept a target and it also posts back to the server, right? However, there's no Target property, although you can set the target HTML attribute easily enough. Code like this looks reasonable: <asp:LinkButton runat="server" ID="btnNewTarget" Text="New Target" target="_blank" OnClick="bnNewTarget_Click" /> But if you try this you'll find that it doesn't work. Why? Because ASP.NET creates postbacks with JavaScript code that operates on the current window/frame: <a id="btnNewTarget" target="_blank" href="javascript:__doPostBack(&#39;btnNewTarget&#39;,&#39;&#39;)">New Target</a> What happens with a target tag is that before the JavaScript actually executes a new window is opened and the focus shifts to the new window. The new window of course is empty and has no __doPostBack() function nor access to the old document. So when you click the link a new window opens but the window remains blank without content - no server postback actually occurs. Natch that idea. Setting the Form Target for a Button Control or LinkButton So, in order to send Postback link controls and buttons to another window/frame, both require that the target of the form gets changed dynamically when the button or link is clicked. Luckily this is rather easy to do however using a little bit of script code and jQuery. Imagine you have two buttons like this that should go to another window: <asp:LinkButton runat="server" ID="btnNewTarget" Text="New Target" OnClick="ClickHandler" /> <asp:Button runat="server" ID="btnButtonNewTarget" Text="New Target Button" OnClick="ClickHandler" /> ClickHandler in this case is any routine that generates the output you want to display in the new window. Generally this output will not come from the current page markup but is generated externally - like a PDF report or some report generated by another application component or tool. The output generally will be either generated by hand or something that was generated to disk to be displayed with Response.Redirect() or Response.TransmitFile() etc. Here's the dummy handler that just generates some HTML by hand and displays it: protected void ClickHandler(object sender, EventArgs e) { // Perform some operation that generates HTML or Redirects somewhere else Response.Write("Some custom output would be generated here (PDF, non-Page HTML etc.)"); // Make sure this response doesn't display the page content // Call Response.End() or Response.Redirect() Response.End(); } To route this oh so sophisticated output to an alternate window for both the LinkButton and Button Controls, you can use the following simple script code: <script type="text/javascript"> $("#btnButtonNewTarget,#btnNewTarget").click(function () { $("form").attr("target", "_blank"); }); </script> So why does this work where the target attribute did not? The difference here is that the script fires BEFORE the target is changed to the new window. When you put a target attribute on a link or form the target is changed as the very first thing before the link actually executes. IOW, the link literally executes in the new window when it's done this way. By attaching a click handler, though we're not navigating yet so all the operations the script code performs (ie. __doPostBack()) and the collection of Form variables to post to the server all occurs in the current page. By changing the target from within script code the target change fires as part of the form submission process which means it runs in the correct context of the current page. IOW - the input for the POST is from the current page, but the output is routed to a new window/frame. Just what we want in this scenario. Voila you can dynamically route output to the appropriate window.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  HTML  jQuery  

    Read the article

  • Custom Model Binding of IEnumerable Properties in ASP.Net MVC 2

    - by Doug Lampe
    MVC 2 provides a GREAT feature for dealing with enumerable types.  Let's say you have an object with a parent/child relationship and you want to allow users to modify multiple children at the same time.  You can simply use the following syntax for any indexed enumerables (arrays, generic lists, etc.) and then your values will bind to your enumerable model properties. 1: <% using (Html.BeginForm("TestModelParameter", "Home")) 2: { %> 3: < table > 4: < tr >< th >ID</th><th>Name</th><th>Description</th></tr> 5: <% for (int i = 0; i < Model.Items.Count; i++) 6: { %> 7: < tr > 8: < td > 9: <%= i %> 10: </ td > 11: < td > 12: <%= Html.TextBoxFor(m => m.Items[i].Name) %> 13: </ td > 14: < td > 15: <%= Model.Items[i].Description %> 16: </ td > 17: </ tr > 18: <% } %> 19: </ table > 20: < input type ="submit" /> 21: <% } %> Then just update your model either by passing it into your action method as a parameter or explicitly with UpdateModel/TryUpdateModel. 1: public ActionResult TestTryUpdate() 2: { 3: ContainerModel model = new ContainerModel(); 4: TryUpdateModel(model); 5:   6: return View("Test", model); 7: } 8:   9: public ActionResult TestModelParameter(ContainerModel model) 10: { 11: return View("Test", model); 12: } Simple right?  Well, not quite.  The problem is the DefaultModelBinder and how it sets properties.  In this case our model has a property that is a generic list (Items).  The first bad thing the model binder does is create a new instance of the list.  This can be fixed by making the property truly read-only by removing the set accessor.  However this won't help because this behaviour continues.  As the model binder iterates through the items to "set" their values, it creates new instances of them as well.  This means you lose any information not passed via the UI to your controller so in the examplel above the "Description" property would be blank for each item after the form posts. One solution for this is custom model binding.  I have put together a solution which allows you to retain the structure of your model.  Model binding is a somewhat advanced concept so you may need to do some additional research to really understand what is going on here, but the code is fairly simple.  First we will create a binder for the parent object which will retain the state of the parent as well as some information on which children have already been bound. 1: public class ContainerModelBinder : DefaultModelBinder 2: { 3: /// <summary> 4: /// Gets an instance of the model to be used to bind child objects. 5: /// </summary> 6: public ContainerModel Model { get; private set; } 7:   8: /// <summary> 9: /// Gets a list which will be used to track which items have been bound. 10: /// </summary> 11: public List<ItemModel> BoundItems { get; private set; } 12:   13: public ContainerModelBinder() 14: { 15: BoundItems = new List<ItemModel>(); 16: } 17:   18: protected override object CreateModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Type modelType) 19: { 20: // Set the Model property so child binders can find children. 21: Model = base.CreateModel(controllerContext, bindingContext, modelType) as ContainerModel; 22:   23: return Model; 24: } 25: } Next we will create the child binder and have it point to the parent binder to get instances of the child objects.  Note that this only works if there is only one property of type ItemModel in the parent class since the property to find the item in the parent is hard coded. 1: public class ItemModelBinder : DefaultModelBinder 2: { 3: /// <summary> 4: /// Gets the parent binder so we can find objects in the parent's collection 5: /// </summary> 6: public ContainerModelBinder ParentBinder { get; private set; } 7: 8: public ItemModelBinder(ContainerModelBinder containerModelBinder) 9: { 10: ParentBinder = containerModelBinder; 11: } 12:   13: protected override object CreateModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Type modelType) 14: { 15: // Find the item in the parent collection and add it to the bound items list. 16: ItemModel item = ParentBinder.Model.Items.FirstOrDefault(i => !ParentBinder.BoundItems.Contains(i)); 17: ParentBinder.BoundItems.Add(item); 18: 19: return item; 20: } 21: } Finally, we will register these binders in Global.asax.cs so they will be used to bind the classes. 1: protected void Application_Start() 2: { 3: AreaRegistration.RegisterAllAreas(); 4:   5: ContainerModelBinder containerModelBinder = new ContainerModelBinder(); 6: ModelBinders.Binders.Add(typeof(ContainerModel), containerModelBinder); 7: ModelBinders.Binders.Add(typeof(ItemModel), new ItemModelBinder(containerModelBinder)); 8:   9: RegisterRoutes(RouteTable.Routes); 10: } I'm sure some of my fellow geeks will comment that this could be done more efficiently by simply rewriting some of the methods of the default model binder to get the same desired behavior.  I like my method shown here because it extends the binder class instead of modifying it so it minimizes the potential for unforseen problems. In a future post (if I ever get around to it) I will explore creating a generic version of these binders.

    Read the article

  • Java Cloud Service Integration using Web Service Data Control

    - by Jani Rautiainen
    Java Cloud Service (JCS) provides a platform to develop and deploy business applications in the cloud. In Fusion Applications Cloud deployments customers do not have the option to deploy custom applications developed with JDeveloper to ensure the integrity and supportability of the hosted application service. Instead the custom applications can be deployed to the JCS and integrated to the Fusion Application Cloud instance.This series of articles will go through the features of JCS, provide end-to-end examples on how to develop and deploy applications on JCS and how to integrate them with the Fusion Applications instance.In this article a custom application integrating with Fusion Application using Web Service Data Control will be implemented. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Pre-requisites Access to Cloud instance In order to deploy the application access to a JCS instance is needed, a free trial JCS instance can be obtained from Oracle Cloud site. To register you will need a credit card even if the credit card will not be charged. To register simply click "Try it" and choose the "Java" option. The confirmation email will contain the connection details. See this video for example of the registration. Once the request is processed you will be assigned 2 service instances; Java and Database. Applications deployed to the JCS must use Oracle Database Cloud Service as their underlying database. So when JCS instance is created a database instance is associated with it using a JDBC data source. The cloud services can be monitored and managed through the web UI. For details refer to Getting Started with Oracle Cloud. JDeveloper JDeveloper contains Cloud specific features related to e.g. connection and deployment. To use these features download the JDeveloper from JDeveloper download site by clicking the “Download JDeveloper 11.1.1.7.1 for ADF deployment on Oracle Cloud” link, this version of JDeveloper will have the JCS integration features that will be used in this article. For versions that do not include the Cloud integration features the Oracle Java Cloud Service SDK or the JCS Java Console can be used for deployment. For details on installing and configuring the JDeveloper refer to the installation guide. For details on SDK refer to Using the Command-Line Interface to Monitor Oracle Java Cloud Service and Using the Command-Line Interface to Manage Oracle Java Cloud Service. Create Application In this example the “JcsWsDemo” application created in the “Java Cloud Service Integration using Web Service Proxy” article is used as the base. Create Web Service Data Control In this example we will use a Web Service Data Control to integrate with Credit Rule Service in Fusion Applications. The data control will be used to query data from Fusion Applications using a web service call and present the data in a table. To generate the data control choose the “Model” project and navigate to "New -> All Technologies -> Business Tier -> Data Controls -> Web Service Data Control" and enter following: Name: CreditRuleServiceDC URL: https://ic-[POD].oracleoutsourcing.com/icCnSetupCreditRulesPublicService/CreditRuleService?WSDL Service: {{http://xmlns.oracle.com/apps/incentiveCompensation/cn/creditSetup/creditRule/creditRuleService/}CreditRuleService On step 2 select the “findRule” operation: Skip step 3 and on step 4 define the credentials to access the service. Do note that in this example these credentials are only used if testing locally, for JCS deployment credentials need to be manually updated on the EAR file: Click “Finish” and the proxy generation is done. Creating UI In order to use the data control we will need to populate complex objects FindCriteria and FindControl. For simplicity in this example we will create logic in a managed bean that populates the objects. Open “JcsWsDemoBean.java” and add the following logic: Map findCriteria; Map findControl; public void setFindCriteria(Map findCriteria) { this.findCriteria = findCriteria; } public Map getFindCriteria() { findCriteria = new HashMap(); findCriteria.put("fetchSize",10); findCriteria.put("fetchStart",0); return findCriteria; } public void setFindControl(Map findControl) { this.findControl = findControl; } public Map getFindControl() { findControl = new HashMap(); return findControl; } Open “JcsWsDemo.jspx”, navigate to “Data Controls -> CreditRuleServiceDC -> findRule(Object, Object) -> result” and drag and drop the “result” node into the “af:form” element in the page: On the “Edit Table Columns” remove all columns except “RuleId” and “Name”: On the “Edit Action Binding” window displayed enter reference to the java class created above by selecting “#{JcsWsDemoBean.findCriteria}”: Also define the value for the “findControl” by selecting “#{JcsWsDemoBean.findControl}”. Deploy to JCS For WS DC the authentication details need to be updated on the connection details before deploying. Open “connections.xml” by navigating “Application Resources -> Descriptors -> ADF META-INF -> connections.xml”: Change the user name and password entry from: <soap username="transportUserName" password="transportPassword" To match the access details for the target environment. Follow the same steps as documented in previous article ”Java Cloud Service ADF Web Application”. Once deployed the application can be accessed with URL: https://java-[identity domain].java.[data center].oraclecloudapps.com/JcsWsDemo-ViewController-context-root/faces/JcsWsDemo.jspx When accessed the first 10 rules in the system are displayed: Summary In this article we learned how to integrate with Fusion Applications using a Web Service Data Control in JCS. In future articles various other integration techniques will be covered. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

    Read the article

  • Improved Performance on PeopleSoft Combined Benchmark using SPARC T4-4

    - by Brian
    Oracle's SPARC T4-4 server running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved a world record 18,000 concurrent users experiencing subsecond response time while executing a PeopleSoft Payroll batch job of 500,000 employees in 32.4 minutes. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 47% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. Performance Landscape Results are presented for the PeopleSoft HRMS Self-Service and Payroll combined benchmark. The new result with 128 streams shows significant improvement in the payroll batch processing time with little impact on the self-service component response time. PeopleSoft HRMS Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-4 (db) 18,000 0.988 0.539 32.4 128 SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-4 (db) 18,000 0.944 0.503 43.3 64 The following results are for the PeopleSoft HRMS Self-Service benchmark that was previous run. The results are not directly comparable with the combined results because they do not include the payroll component. PeopleSoft HRMS Self-Service 9.1 Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) 2x SPARC T4-2 (db) 18,000 1.048 0.742 N/A N/A The following results are for the PeopleSoft Payroll benchmark that was previous run. The results are not directly comparable with the combined results because they do not include the self-service component. PeopleSoft Payroll (N.A.) 9.1 - 500K Employees (7 Million SQL PayCalc, Unicode) Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-4 (db) N/A N/A N/A 30.84 96 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory Oracle Solaris 11 11/11 Oracle Database 11g Release 2 PeopleTools 8.52 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Micro Focus Server Express (COBOL v 5.1.00) Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. A total of 128 PeopleSoft streams server processes where used on the database node to complete payroll batch job of 500,000 employees in 32.4 minutes. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Managementoracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 8 November 2012.

    Read the article

  • Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

    - by SQLOS Team
    Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols --  This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes.   MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing     Peter Saddow Senior Program Manager – MAP Toolkit Team

    Read the article

  • SQL SERVER – Core Concepts – Elasticity, Scalability and ACID Properties – Exploring NuoDB an Elastically Scalable Database System

    - by pinaldave
    I have been recently exploring Elasticity and Scalability attributes of databases. You can see that in my earlier blog posts about NuoDB where I wanted to look at Elasticity and Scalability concepts. The concepts are very interesting, and intriguing as well. I have discussed these concepts with my friend Joyti M and together we have come up with this interesting read. The goal of this article is to answer following simple questions What is Elasticity? What is Scalability? How ACID properties vary from NOSQL Concepts? What are the prevailing problems in the current database system architectures? Why is NuoDB  an innovative and welcome change in database paradigm? Elasticity This word’s original form is used in many different ways and honestly it does do a decent job in holding things together over the years as a person grows and contracts. Within the tech world, and specifically related to software systems (database, application servers), it has come to mean a few things - allow stretching of resources without reaching the breaking point (on demand). What are resources in this context? Resources are the usual suspects – RAM/CPU/IO/Bandwidth in the form of a container (a process or bunch of processes combined as modules). When it is about increasing resources the simplest idea which comes to mind is the addition of another container. Another container means adding a brand new physical node. When it is about adding a new node there are two questions which comes to mind. 1) Can we add another node to our software system? 2) If yes, does adding new node cause downtime for the system? Let us assume we have added new node, let us see what the new needs of the system are when a new node is added. Balancing incoming requests to multiple nodes Synchronization of a shared state across multiple nodes Identification of “downstate” and resolution action to bring it to “upstate” Well, adding a new node has its advantages as well. Here are few of the positive points Throughput can increase nearly horizontally across the node throughout the system Response times of application will increase as in-between layer interactions will be improved Now, Let us put the above concepts in the perspective of a Database. When we mention the term “running out of resources” or “application is bound to resources” the resources can be CPU, Memory or Bandwidth. The regular approach to “gain scalability” in the database is to look around for bottlenecks and increase the bottlenecked resource. When we have memory as a bottleneck we look at the data buffers, locks, query plans or indexes. After a point even this is not enough as there needs to be an efficient way of managing such large workload on a “single machine” across memory and CPU bound (right kind of scheduling)  workload. We next move on to either read/write separation of the workload or functionality-based sharing so that we still have control of the individual. But this requires lots of planning and change in client systems in terms of knowing where to go/update/read and for reporting applications to “aggregate the data” in an intelligent way. What we ideally need is an intelligent layer which allows us to do these things without us getting into managing, monitoring and distributing the workload. Scalability In the context of database/applications, scalability means three main things Ability to handle normal loads without pressure E.g. X users at the Y utilization of resources (CPU, Memory, Bandwidth) on the Z kind of hardware (4 processor, 32 GB machine with 15000 RPM SATA drives and 1 GHz Network switch) with T throughput Ability to scale up to expected peak load which is greater than normal load with acceptable response times Ability to provide acceptable response times across the system E.g. Response time in S milliseconds (or agreed upon unit of measure) – 90% of the time The Issue – Need of Scale In normal cases one can plan for the load testing to test out normal, peak, and stress scenarios to ensure specific hardware meets the needs. With help from Hardware and Software partners and best practices, bottlenecks can be identified and requisite resources added to the system. Unfortunately this vertical scale is expensive and difficult to achieve and most of the operational people need the ability to scale horizontally. This helps in getting better throughput as there are physical limits in terms of adding resources (Memory, CPU, Bandwidth and Storage) indefinitely. Today we have different options to achieve scalability: Read & Write Separation The idea here is to do actual writes to one store and configure slaves receiving the latest data with acceptable delays. Slaves can be used for balancing out reads. We can also explore functional separation or sharing as well. We can separate data operations by a specific identifier (e.g. region, year, month) and consolidate it for reporting purposes. For functional separation the major disadvantage is when schema changes or workload pattern changes. As the requirement grows one still needs to deal with scale need in manual ways by providing an abstraction in the middle tier code. Using NOSQL solutions The idea is to flatten out the structures in general to keep all values which are retrieved together at the same store and provide flexible schema. The issue with the stores is that they are compromising on mostly consistency (no ACID guarantees) and one has to use NON-SQL dialect to work with the store. The other major issue is about education with NOSQL solutions. Would one really want to make these compromises on the ability to connect and retrieve in simple SQL manner and learn other skill sets? Or for that matter give up on ACID guarantee and start dealing with consistency issues? Hybrid Deployment – Mac, Linux, Cloud, and Windows One of the challenges today that we see across On-premise vs Cloud infrastructure is a difference in abilities. Take for example SQL Azure – it is wonderful in its concepts of throttling (as it is shared deployment) of resources and ability to scale using federation. However, the same abilities are not available on premise. This is not a mistake, mind you – but a compromise of the sweet spot of workloads, customer requirements and operational SLAs which can be supported by the team. In today’s world it is imperative that databases are available across operating systems – which are a commodity and used by developers of all hues. An Ideal Database Ability List A system which allows a linear scale of the system (increase in throughput with reasonable response time) with the addition of resources A system which does not compromise on the ACID guarantees and require developers to learn new paradigms A system which does not force fit a new way interacting with database by learning Non-SQL dialect A system which does not force fit its mechanisms for providing availability across its various modules. Well NuoDB is the first database which has all of the above abilities and much more. In future articles I will cover my hands-on experience with it. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

    Read the article

  • HTML5 Input type=date Formatting Issues

    - by Rick Strahl
    One of the nice features in HTML5 is the abililty to specify a specific input type for HTML text input boxes. There a host of very useful input types available including email, number, date, datetime, month, number, range, search, tel, time, url and week. For a more complete list you can check out the MDN reference. Date input types also support automatic validation which can be useful in some scenarios but maybe can get in the way at other times. One of the more common input types, and one that can most benefit of a custom UI for selection is of course date input. Almost every application could use a decent date representation and HTML5's date input type seems to push into the right direction. It'd be nice if you could just say:<form action="DateTest.html"> <label for="FromDate">Enter a Date:</label> <input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> <hr /> <input type="submit" id="btnSubmit" name="btnSubmit" value="Save Date" class="smallbutton" /> </form> but if you'd expect to just work, you're likely to be pretty disappointed. Problem #1: Browser Support For starters there's browser support. Out of the major browsers only the latest versions of WebKit and Opera based browsers seem to support date input. Neither FireFox, nor any version of Internet Explorer (including the new touch enabled IE10 in Windows RT) support input type=date. Browser support is an issue, but it would be OK if it wasn't for problem #2. Problem #2: Date Formatting If you look at my date input from before:<input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> You can see that my date is formatted in local date format (ie. en-us). Now when I run this sadly the form that comes up in Chrome (and also iOS mobile browsers) comes up like this: Chrome isn't recognizing my local date string. Instead it's expecting my date format to be provided in ISO 8601 format which is: 2012-11-08 So if I change the date input field to:<input type="date" id="FromDate" name="FromDate" value="2012-10-08" class="date" /> I correctly get the date field filled in: Also when I pick a date with the DatePicker the date value is also returned is also set to the ISO date format. Yet notice how the date is still formatted to the local date time format (ie. en-US format). So if I pick a new date: and then save, the value field is set back to: 2012-11-15 using the ISO format. The same is true for Opera and iOS browsers and I suspect any other WebKit style browser and their date pickers. So to summarize input type=date: Expects ISO 8601 format dates to display intial values Sets selected date values to ISO 8601 Now what? This would sort of make sense, if all browsers supported input type=date. It'd be easy because you could just format dates appropriately when you set the date value into the control by applying the appropriate culture formatting (ie. .ToString("yyyy-MM-dd") ). .NET is actually smart enough to pick up the date on the other end for modelbinding when ISO 8601 is used. For other environments this might be a bit more tricky. input type=date is clearly the way to go forward. Date controls implemented in HTML are going the way of the dodo, given the intricacies of mobile platforms and scaling for both desktop and mobile. I've been using jQuery UI Datepicker for ages but once going to mobile, that's no longer an option as the control doesn't scale down well for mobile apps (at least not without major re-styling). It also makes a lot of sense for the browser to provide this functionality - creating a consistent date input experience across apps only makes sense, which is why I find it baffling that neither FireFox nor IE 10 deign it necessary to support date input natively. The problem is that a large number of even the latest and greatest browsers don't support this. So now you're stuck with not knowing what date format you have to serve since neither the local format, nor the ISO format works in all cases. For my current app I just broke down and used the ISO format and so I'll live with the non-local date format. <input type="date" id="ToDate" name="ToDate" value="2012-11-08" class="date"/> Here's what this looks like on Chrome: Here's what it looks like on my iPhone: Both Chrome and the phone do this the way it should be. For the phone especially this demonstrates why we'd want this - the built-in date picker there certainly beats manually trying to edit the date using finger gymnastics, and it's one of the easiest ways to pick a date I can think of (ie. easier to use than your typical date picker). Finally here's what the date looks like in FireFox: Certainly this is not the ideal date format, but it's clear enough I suppose. If users enter a date in local US format and that works as well (but won't work for other locales). It'll have to do. Over time one can only hope that other browsers will finally decide to implement this functionality natively to provide a unique experience. Until then, incomplete solutions it is. Related Posts Html 5 Input Types - How useful is this really going to be?© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  HTML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Running Solaris 11 as a control domain on a T2000

    - by jsavit
    There is increased adoption of Oracle Solaris 11, and many customers are deploying it on systems that previously ran Solaris 10. That includes older T1-processor based systems like T1000 and T2000. Even though they are old (from 2005) and don't have the performance of current SPARC servers, they are still functional, stable servers that customers continue to operate. One reason to install Solaris 11 on them is that older machines are attractive for testing OS upgrades before updating current, production systems. Normally this does not present a challenge, because Solaris 11 runs on any T-series or M-series SPARC server. One scenario adds a complication: running Solaris 11 in a control domain on a T1000 or T2000 hosting logical domains. Solaris 11 pre-installed Oracle VM Server for SPARC incompatible with T1 Unlike Solaris 10, Solaris 11 comes with Oracle VM Server for SPARC preinstalled. The ldomsmanager package contains the logical domains manager for Oracle VM Server for SPARC 2.2, which requires a SPARC T2, T2+, T3, or T4 server. It does not work with T1-processor systems, which are only supported by LDoms Manager 1.2 and earlier. The following screenshot shows what happens (bold font) if you try to use Oracle VM Server for SPARC 2.x commands in a Solaris 11 control domain. The commands were issued in a control domain on a T2000 that previously ran Solaris 10. We also display the version of the logical domains manager installed in Solaris 11: root@t2000 psrinfo -vp The physical processor has 4 virtual processors (0-3) UltraSPARC-T1 (chipid 0, clock 1200 MHz) # prtconf|grep T SUNW,Sun-Fire-T200 # ldm -V Failed to connect to logical domain manager: Connection refused # pkg info ldomsmanager Name: system/ldoms/ldomsmanager Summary: Logical Domains Manager Description: LDoms Manager - Virtualization for SPARC T-Series Category: System/Virtualization State: Installed Publisher: solaris Version: 2.2.0.0 Build Release: 5.11 Branch: 0.175.0.8.0.3.0 Packaging Date: May 25, 2012 10:20:48 PM Size: 2.86 MB FMRI: pkg://solaris/system/ldoms/[email protected],5.11-0.175.0.8.0.3.0:20120525T222048Z The 2.2 version of the logical domains manager will have to be removed, and 1.2 installed, in order to use this as a control domain. Preparing to change - create a new boot environment Before doing anything else, lets create a new boot environment: # beadm list BE Active Mountpoint Space Policy Created -- ------ ---------- ----- ------ ------- solaris NR / 2.14G static 2012-09-25 10:32 # beadm create solaris-1 # beadm activate solaris-1 # beadm list BE Active Mountpoint Space Policy Created -- ------ ---------- ----- ------ ------- solaris N / 4.82M static 2012-09-25 10:32 solaris-1 R - 2.14G static 2012-09-29 11:40 # init 0 Normally an init 6 to reboot would have been sufficient, but in the next step I reset the system anyway in order to put the system in factory default mode for a "clean" domain configuration. Preparing to change - reset to factory default There was a leftover domain configuration on the T2000, so I reset it to the factory install state. Since the ldm command is't working yet, it can't be done from the control domain, so I did it by logging onto to the service processor: $ ssh -X admin@t2000-sc Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. Oracle Advanced Lights Out Manager CMT v1.7.9 Please login: admin Please Enter password: ******** sc> showhost Sun-Fire-T2000 System Firmware 6.7.10 2010/07/14 16:35 Host flash versions: OBP 4.30.4.b 2010/07/09 13:48 Hypervisor 1.7.3.c 2010/07/09 15:14 POST 4.30.4.b 2010/07/09 14:24 sc> bootmode config="factory-default" sc> poweroff Are you sure you want to power off the system [y/n]? y SC Alert: SC Request to Power Off Host. SC Alert: Host system has shut down. sc> poweron SC Alert: Host System has Reset At this point I rebooted into the new Solaris 11 boot environment, and Solaris commands showed it was running on the factory default configuration of a single domain owning all 32 CPUs and 32GB of RAM (that's what it looked like in 2005.) # psrinfo -vp The physical processor has 8 cores and 32 virtual processors (0-31) The core has 4 virtual processors (0-3) The core has 4 virtual processors (4-7) The core has 4 virtual processors (8-11) The core has 4 virtual processors (12-15) The core has 4 virtual processors (16-19) The core has 4 virtual processors (20-23) The core has 4 virtual processors (24-27) The core has 4 virtual processors (28-31) UltraSPARC-T1 (chipid 0, clock 1200 MHz) # prtconf|grep Mem Memory size: 32640 Megabytes Note that the older processor has 4 virtual CPUs per core, while current processors have 8 per core. Remove ldomsmanager 2.2 and install the 1.2 version The Solaris 11 pkg command is now used to remove the 2.2 version that shipped with Solaris 11: # pkg uninstall ldomsmanager Packages to remove: 1 Create boot environment: No Create backup boot environment: No Services to change: 2 PHASE ACTIONS Removal Phase 130/130 PHASE ITEMS Package State Update Phase 1/1 Package Cache Update Phase 1/1 Image State Update Phase 2/2 Finally, LDoms 1.2 installed via its install script, the same way it was done years ago: # unzip LDoms-1_2-Integration-10.zip # cd LDoms-1_2-Integration-10/Install/ # ./install-ldm Welcome to the LDoms installer. You are about to install the Logical Domains Manager package that will enable you to create, destroy and control other domains on your system. Given the capabilities of the LDoms domain manager, you can now change the security configuration of this Solaris instance using the Solaris Security Toolkit. ... ... normal install messages omitted ... The Solaris Security Toolkit applies to Solaris 10, and cannot be used in Solaris 11 (in which several things hardened by the Toolkit are already hardened by default), so answer b in the choice below: You are about to install the Logical Domains Manager package that will enable you to create, destroy and control other domains on your system. Given the capabilities of the LDoms domain manager, you can now change the security configuration of this Solaris instance using the Solaris Security Toolkit. Select a security profile from this list: a) Hardened Solaris configuration for LDoms (recommended) b) Standard Solaris configuration c) Your custom-defined Solaris security configuration profile Enter a, b, or c [a]: b ... other install messages omitted for brevity... After install I ensure that the necessary services are enabled, and verify the version of the installed LDoms Manager: # svcs ldmd STATE STIME FMRI online 22:00:36 svc:/ldoms/ldmd:default # svcs vntsd STATE STIME FMRI disabled Aug_19 svc:/ldoms/vntsd:default # ldm -V Logical Domain Manager (v 1.2-debug) Hypervisor control protocol v 1.3 Using Hypervisor MD v 1.1 System PROM: Hypervisor v. 1.7.3. @(#)Hypervisor 1.7.3.c 2010/07/09 15:14\015 OpenBoot v. 4.30.4. @(#)OBP 4.30.4.b 2010/07/09 13:48 Set up control domain and domain services At this point we have a functioning LDoms 1.2 environment that can be configured in the usual fashion. One difference is that LDoms 1.2 behavior had 'delayed configuration mode (as expected) during initial configuration before rebooting the control domain. Another minor difference with a Solaris 11 control domain is that you define virtual switches using the 'vanity name' of the network interface, rather than the hardware driver name as in Solaris 10. # ldm list ------------------------------------------------------------------------------ Notice: the LDom Manager is running in configuration mode. Configuration and resource information is displayed for the configuration under construction; not the current active configuration. The configuration being constructed will only take effect after it is downloaded to the system controller and the host is reset. ------------------------------------------------------------------------------ NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-c-- SP 32 32640M 3.2% 4d 2h 50m # ldm add-vdiskserver primary-vds0 primary # ldm add-vconscon port-range=5000-5100 primary-vcc0 primary # ldm add-vswitch net-dev=net0 primary-vsw0 primary # ldm set-mau 2 primary # ldm set-vcpu 8 primary # ldm set-memory 4g primary # ldm add-config initial # ldm list-spconfig factory-default initial [current] That's it, really. After reboot, we are ready to install guest domains. Summary - new wine in old bottles This example shows that (new) Solaris 11 can be installed on (old) T2000 servers and used as a control domain. The main activity is to remove the preinstalled Oracle VM Server for 2.2 and install Logical Domains 1.2 - the last version of LDoms to support T1-processor systems. I tested Solaris 10 and Solaris 11 guest domains running on this server and they worked without any surprises. This is a viable way to get further into Solaris 11 adoption, even on older T-series equipment.

    Read the article

  • Does Test Driven Development (TDD) improve Quality and Correctness? (Part 1)

    - by David V. Corbin
    Since the dawn of the computer age, various methodologies have been introduced to improve quality and reduce cost. In this posting, I will by sharing my experiences with Test Driven Development; both its benefits and limitations. To start this topic, we need to agree on what TDD is. The first is to define each of the three words as used in this context. Test - An item or action which measures something in some quantifiable form. Driven - The primary motivation or focus of a series of activities (process) Development - All phases of a software project/product from concept through delivery. The above are very simple definitions that result in the following: "TDD is a process where the primary focus is on measuring and quantifying all aspects of the creation of a (software) product." There are many places where TDD is used outside of software development, even though it is not known by this name. Consider the (conventional) education process that most of us grew up on. The focus was to get the best grades as measured by different tests. Many of these tests measured rote memorization and not understanding of the subject matter. The result of this that many people graduated with high scores but without "quality and correctness" in their ability to utilize the subject matter (of course, the flip side is true where certain people DID understand the material but were not very good at taking this type of test). Returning to software development, let us look at some common scenarios. While these items are generally applicable regardless of platform, language and tools; the remainder of this post will utilize Microsoft Visual Studio and Team Foundation Server (TFS) for examples. It should be realized that everyone does at least some aspect of TDD. At the most rudimentary level, getting a program to compile involves a "pass/fail" measurement (is the syntax valid) that drives their ability to proceed further (run the program). Other developers may create "Unit Tests" in the belief that having a test for every method/property of a class and good code coverage is the goal of TDD. These items may be helpful and even important, but really only address a small aspect of the overall effort. To see TDD in a bigger view, lets identify the various activities that are part of the Software Development LifeCycle. These are going to be presented in a Waterfall style for simplicity, but each item also occurs within Iterative methodologies such as Agile/Scrum. the key ones here are: Requirements Gathering Architecture Design Implementation Quality Assurance Can each of these items be subjected to a process which establishes metrics (quantified metrics) that reflect both the quality and correctness of each item? It should be clear that conventional Unit Tests do not apply to all of these items; at best they can verify that a local aspect (e.g. a Class/Method) of implementation matches the (test writers perspective of) the appropriate design document. So what can we do? For each of area, the goal is to create tests that are quantifiable and durable. The ability to quantify the measurements (beyond a simple pass/fail) is critical to tracking progress(eventually measuring the level of success that has been achieved) and for providing clear information on what items need to be addressed (along with the appropriate time to address them - in varying levels of detail) . Durability is important so that the test can be reapplied (ideally in an automated fashion) over the entire cycle. Returning for a moment back to our "education example", one must also be careful of how the tests are organized and how the measurements are taken. If a test is in a multiple choice format, there is a significant statistical probability that a correct answer might be the result of a random guess. Also, in many situations, having the student simply provide a final answer can obscure many important elements. For example, on a math test, having the student simply provide a numeric answer (rather than showing the methodology) may result in a complete mismatch between the process and the result. It is hard to determine which is worse: The student who makes a simple arithmetric error at one step of a long process (resulting in a wrong answer) or The student who (without providing the "workflow") uses a completely invalid approach, yet still comes up with the right number. The "Wrong Process"/"Right Answer" is probably the single biggest problem in software development. Even very simple items can suffer from this. As an example consider the following code for a "straight line" calculation....Is it correct? (for Integral Points)         int Solve(int m, int b, int x) { return m * x + b; }   Most people would respond "Yes". But let's take the question one step further... Is it correct for all possible values of m,b,x??? (no fair if you cheated by being focused on the bolded text!)  Without additional information regarding constrains on "the possible values of m,b,x" the answer must be NO, there is the risk of overflow/wraparound that will produce an incorrect result! To properly answer this question (i.e. Test the Code), one MUST be able to backtrack from the implementation through the design, and architecture all the way back to the requirements. And the requirement itself must be tested against the stakeholder(s). It is only when the bounding conditions are defined that it is possible to determine if the code is "Correct" and has "Quality". Yet, how many of us (myself included) have written such code without even thinking about it. In many canses we (think we) "know" what the bounds are, and that the code will be correct. As we all know, requirements change, "code reuse" causes implementations to be applied to different scenarios, etc. This leads directly to the types of system failures that plague so many projects. This approach to TDD is much more holistic than ones which start by focusing on the details. The fundamental concepts still apply: Each item should be tested. The test should be defined/implemented before (or concurrent with) the definition/implementation of the actual item. We also add concepts that expand the scope and alter the style by recognizing: There are many things beside "lines of code" that benefit from testing (measuring/evaluating in a formal way) Correctness and Quality can not be solely measured by "correct results" In the future parts, we will examine in greater detail some of the techniques that can be applied to each of these areas....

    Read the article

  • New ways for backup, recovery and restore of Essbase Block Storage databases – part 2 by Bernhard Kinkel

    - by Alexandra Georgescu
    After discussing in the first part of this article new options in Essbase for the general backup and restore, this second part will deal with the also rather new feature of Transaction Logging and Replay, which was released in version 11.1, enhancing existing restore options. Tip: Transaction logging and replay cannot be used for aggregate storage databases. Please refer to the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1). Even if backups are done on a regular, frequent base, subsequent data entries, loads or calculations would not be reflected in a restored database. Activating Transaction Logging could fill that gap and provides you with an option to capture these post-backup transactions for later replay. The following table shows, which are the transactions that could be logged when Transaction Logging is enabled: In order to activate its usage, corresponding statements could be added to the Essbase.cfg file, using the TRANSACTIONLOGLOCATION command. The complete syntax reads: TRANSACTIONLOGLOCATION [ appname [ dbname]] LOGLOCATION NATIVE ?ENABLE | DISABLE Where appname and dbname are optional parameters giving you the chance in combination with the ENABLE or DISABLE command to set Transaction Logging for certain applications or databases or to exclude them from being logged. If only an appname is specified, the setting applies to all databases in that particular application. If appname and dbname are not defined, all applications and databases would be covered. LOGLOCATION specifies the directory to which the log is written, e.g. D:\temp\trlogs. This directory must already exist or needs to be created before using it for log information being written to it. NATIVE is a reserved keyword that shouldn’t be changed. The following example shows how to first enable logging on a more general level for all databases in the application Sample, followed by a disabling statement on a more granular level for only the Basic database in application Sample, hence excluding it from being logged. TRANSACTIONLOGLOCATION Sample Hyperion/trlog/Sample NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Basic Hyperion/trlog/Sample NATIVE DISABLE Tip: After applying changes to the configuration file you must restart the Essbase server in order to initialize the settings. A maybe required replay of logged transactions after restoring a database can be done only by administrators. The following options are available: In Administration Services selecting Replay Transactions on the right-click menu on the database: Here you can select to replay transactions logged after the last replay request was originally executed or after the time of the last restored backup (whichever occurred later) or transactions logged after a specified time. Or you can replay transactions selectively based on a range of sequence IDs, which can be accessed using Display Transactions on the right-click menu on the database: These sequence ID s (0, 1, 2 … 7 in the screenshot below) are assigned to each logged transaction, indicating the order in which the transaction was performed. This helps to ensure the integrity of the restored data after a replay, as the replay of transactions is enforced in the same order in which they were originally performed. So for example a calculation originally run after a data load cannot be replayed before having replayed the data load first. After a transaction is replayed, you can replay only transactions with a greater sequence ID. For example, replaying the transaction with sequence ID of 4 includes all preceding transactions, while afterwards you can only replay transactions with a sequence ID of 5 or greater. Tip: After restoring a database from a backup you should always completely replay all logged transactions, which were executed after the backup, before executing new transactions. But not only the transaction information itself needs to be logged and stored in a specified directory as described above. During transaction logging, Essbase also creates archive copies of data load and rules files in the following default directory: ARBORPATH/app/appname/dbname/Replay These files are then used during the replay of a logged transaction. By default Essbase archives only data load and rules files for client data loads, but in order to specify the type of data to archive when logging transactions you can use the command TRANSACTIONLOGDATALOADARCHIVE as an additional entry in the Essbase.cfg file. The syntax for the statement is: TRANSACTIONLOGDATALOADARCHIVE [appname [dbname]] [OPTION] While to the [appname [dbname]] argument the same applies like before for TRANSACTIONLOGLOCATION, the valid values for the OPTION argument are the following: Make the respective setting for which files copies should be logged, considering from which location transactions are usually taking place. Selecting the NONE option prevents Essbase from saving the respective files and the data load cannot be replayed. In this case you must first manually load the data before you can replay the transactions. Tip: If you use server or SQL data and the data and rules files are not archived in the Replay directory (for example, you did not use the SERVER or SERVER_CLIENT option), Essbase replays the data that is actually in the data source at the moment of the replay, which may or may not be the data that was originally loaded. You can find more detailed information in the following documents: Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1) Oracle Essbase Online Documentation (rel. 11.1.2.1)) Enterprise Performance Management System Documentation (including previous releases) Or on the Oracle Technology Network. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here; (please make sure to select your country/region at the top of this page) or in the OU Learning paths section, where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected]. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis. Disclaimer: All methods and features mentioned in this article must be considered and tested carefully related to your environment, processes and requirements. As guidance please always refer to the available software documentation. This article does not recommend or advise any explicit action or change, hence the author cannot be held responsible for any consequences due to the use or implementation of these features.

    Read the article

  • Movement prediction for non-shooters

    - by ShadowChaser
    I'm working on an isometric 2D game with moderate-scale multiplayer, approximately 20-30 players connected at once to a persistent server. I've had some difficulty getting a good movement prediction implementation in place. Physics/Movement The game doesn't have a true physics implementation, but uses the basic principles to implement movement. Rather than continually polling input, state changes (ie/ mouse down/up/move events) are used to change the state of the character entity the player is controlling. The player's direction (ie/ north-east) is combined with a constant speed and turned into a true 3D vector - the entity's velocity. In the main game loop, "Update" is called before "Draw". The update logic triggers a "physics update task" that tracks all entities with a non-zero velocity uses very basic integration to change the entities position. For example: entity.Position += entity.Velocity.Scale(ElapsedTime.Seconds) (where "Seconds" is a floating point value, but the same approach would work for millisecond integer values). The key point is that no interpolation is used for movement - the rudimentary physics engine has no concept of a "previous state" or "current state", only a position and velocity. State Change and Update Packets When the velocity of the character entity the player is controlling changes, a "move avatar" packet is sent to the server containing the entity's action type (stand, walk, run), direction (north-east), and current position. This is different from how 3D first person games work. In a 3D game the velocity (direction) can change frame to frame as the player moves around. Sending every state change would effectively transmit a packet per frame, which would be too expensive. Instead, 3D games seem to ignore state changes and send "state update" packets on a fixed interval - say, every 80-150ms. Since speed and direction updates occur much less frequently in my game, I can get away with sending every state change. Although all of the physics simulations occur at the same speed and are deterministic, latency is still an issue. For that reason, I send out routine position update packets (similar to a 3D game) but much less frequently - right now every 250ms, but I suspect with good prediction I can easily boost it towards 500ms. The biggest problem is that I've now deviated from the norm - all other documentation, guides, and samples online send routine updates and interpolate between the two states. It seems incompatible with my architecture, and I need to come up with a better movement prediction algorithm that is closer to a (very basic) "networked physics" architecture. The server then receives the packet and determines the players speed from it's movement type based on a script (Is the player able to run? Get the player's running speed). Once it has the speed, it combines it with the direction to get a vector - the entity's velocity. Some cheat detection and basic validation occurs, and the entity on the server side is updated with the current velocity, direction, and position. Basic throttling is also performed to prevent players from flooding the server with movement requests. After updating its own entity, the server broadcasts an "avatar position update" packet to all other players within range. The position update packet is used to update the client side physics simulations (world state) of the remote clients and perform prediction and lag compensation. Prediction and Lag Compensation As mentioned above, clients are authoritative for their own position. Except in cases of cheating or anomalies, the client's avatar will never be repositioned by the server. No extrapolation ("move now and correct later") is required for the client's avatar - what the player sees is correct. However, some sort of extrapolation or interpolation is required for all remote entities that are moving. Some sort of prediction and/or lag-compensation is clearly required within the client's local simulation / physics engine. Problems I've been struggling with various algorithms, and have a number of questions and problems: Should I be extrapolating, interpolating, or both? My "gut feeling" is that I should be using pure extrapolation based on velocity. State change is received by the client, client computes a "predicted" velocity that compensates for lag, and the regular physics system does the rest. However, it feels at odds to all other sample code and articles - they all seem to store a number of states and perform interpolation without a physics engine. When a packet arrives, I've tried interpolating the packet's position with the packet's velocity over a fixed time period (say, 200ms). I then take the difference between the interpolated position and the current "error" position to compute a new vector and place that on the entity instead of the velocity that was sent. However, the assumption is that another packet will arrive in that time interval, and it's incredibly difficult to "guess" when the next packet will arrive - especially since they don't all arrive on fixed intervals (ie/ state changes as well). Is the concept fundamentally flawed, or is it correct but needs some fixes / adjustments? What happens when a remote player stops? I can immediately stop the entity, but it will be positioned in the "wrong" spot until it moves again. If I estimate a vector or try to interpolate, I have an issue because I don't store the previous state - the physics engine has no way to say "you need to stop after you reach position X". It simply understands a velocity, nothing more complex. I'm reluctant to add the "packet movement state" information to the entities or physics engine, since it violates basic design principles and bleeds network code across the rest of the game engine. What should happen when entities collide? There are three scenarios - the controlling player collides locally, two entities collide on the server during a position update, or a remote entity update collides on the local client. In all cases I'm uncertain how to handle the collision - aside from cheating, both states are "correct" but at different time periods. In the case of a remote entity it doesn't make sense to draw it walking through a wall, so I perform collision detection on the local client and cause it to "stop". Based on point #2 above, I might compute a "corrected vector" that continually tries to move the entity "through the wall" which will never succeed - the remote avatar is stuck there until the error gets too high and it "snaps" into position. How do games work around this?

    Read the article

  • The SPARC SuperCluster

    - by Karoly Vegh
    Oracle has been providing a lead in the Engineered Systems business for quite a while now, in accordance with the motto "Hardware and Software Engineered to Work Together." Indeed it is hard to find a better definition of these systems.  Allow me to summarize the idea. It is:  Build a compute platform optimized to run your technologies Develop application aware, intelligently caching storage components Take an impressively fast network technology interconnecting it with the compute nodes Tune the application to scale with the nodes to yet unseen performance Reduce the amount of data moving via compression Provide this all in a pre-integrated single product with a single-pane management interface All these ideas have been around in IT for quite some time now. The real Oracle advantage is adding the last one to put these all together. Oracle has built quite a portfolio of Engineered Systems, to run its technologies - and run those like they never ran before. In this post I'll focus on one of them that serves as a consolidation demigod, a multi-purpose engineered system.  As you probably have guessed, I am talking about the SPARC SuperCluster. It has many great features inherited from its predecessors, and it adds several new ones. Allow me to pick out and elaborate about some of the most interesting ones from a technological point of view.  I. It is the SPARC SuperCluster T4-4. That is, as compute nodes, it includes SPARC T4-4 servers that we learned to appreciate and respect for their features: The SPARC T4 CPUs: Each CPU has 8 cores, each core runs 8 threads. The SPARC T4-4 servers have 4 sockets. That is, a single compute node can in parallel, simultaneously  execute 256 threads. Now, a full-rack SPARC SuperCluster has 4 of these servers on board. Remember the keyword demigod.  While retaining the forerunner SPARC T3's exceptional throughput, the SPARC T4 CPUs raise the bar with single performance too - a humble 5x better one than their ancestors.  actually, the SPARC T4 CPU cores run in both single-threaded and multi-threaded mode, and switch between these two on-the-fly, fulfilling not only single-threaded OR multi-threaded applications' needs, but even mixed requirements (like in database workloads!). Data security, anyone? Every SPARC T4 CPU core has a built-in encryption engine, that is, encryption algorithms cast into silicon.  A PCI controller right on the chip for customers who need I/O performance.  Built-in, no-cost Virtualization:  Oracle VM for SPARC (the former LDoms or Logical Domains) is not a server-emulation virtualization technology but rather a serverpartitioning one, the hypervisor runs in the server firmware, and all the VMs' HW resources (I/O, CPU, memory) are accessed natively, without performance overhead.  This enables customers to run a number of Solaris 10 and Solaris 11 VMs separated, independent of each other within a physical server II. For Database performance, it includes Exadata Storage Cells - one of the main reasons why the Exadata Database Machine performs at diabolic speed. What makes them important? They provide DB backend storage for your Oracle Databases to run on the SPARC SuperCluster, that is what they are built and tuned for DB performance.  These storage cells are SQL-aware.  That is, if a SPARC T4 database compute node executes a query, it doesn't simply request tons of raw datablocks from the storage, filters the received data, and throws away most of it where the statement doesn't apply, but provides the SQL query to the storage node too. The storage cell software speaks SQL, that is, it is able to prefilter and through that transfer only the relevant data. With this, the traffic between database nodes and storage cells is reduced immensely. Less I/O is a good thing - as they say, all the CPUs of the world do one thing just as fast as any other - and that is waiting for I/O.  They don't only pre-filter, but also provide data preprocessing features - e.g. if a DB-node requests an aggregate of data, they can calculate it, and handover only the results, not the whole set. Again, less data to transfer.  They support the magical HCC, (Hybrid Columnar Compression). That is, data can be stored in a precompressed form on the storage. Less data to transfer.  Of course one can't simply rely on disks for performance, there is Flash Storage included there for caching.  III. The low latency, high-speed backbone network: InfiniBand, that interconnects all the members with: Real High Speed: 40 Gbit/s. Full Duplex, of course. Oh, and a really low latency.  RDMA. Remote Direct Memory Access. This technology allows the DB nodes to do exactly that. Remotely, directly placing SQL commands into the Memory of the storage cells. Dodging all the network-stack bottlenecks, avoiding overhead, placing requests directly into the process queue.  You can also run IP over InfiniBand if you please - that's the way the compute nodes can communicate with each other.  IV. Including a general-purpose storage too: the ZFSSA, which is a unified storage, providing NAS and SAN access too, with the following features:  NFS over RDMA over InfiniBand. Nothing is faster network-filesystem-wise.  All the ZFS features onboard, hybrid storage pools, compression, deduplication, snapshot, replication, NFS and CIFS shares Storageheads in a HA-Cluster configuration providing availability of the data  DTrace Live Analytics in a web-based Administration UI Being a general purpose application data storage for your non-database applications running on the SPARC SuperCluster over whichever protocol they prefer, easily replicating, snapshotting, cloning data for them.  There's a lot of great technology included in Oracle's SPARC SuperCluster, we have talked its interior through. As for external scalability: you can start with a half- of full- rack SPARC SuperCluster, and scale out to several racks - that is, stacking not separate full-rack SPARC SuperClusters, but extending always one large instance of the size of several full-racks. Yes, over InfiniBand network. Add racks as you grow.  What technologies shall run on it? SPARC SuperCluster is a general purpose scaleout consolidation/cloud environment. You can run Oracle Databases with RAC scaling, or Oracle Weblogic (end enjoy the SPARC T4's advantages to run Java). Remember, Oracle technologies have been integrated with the Oracle Engineered Systems - this is the Oracle on Oracle advantage. But you can run other software environments such as SAP if you please too. Run any application that runs on Oracle Solaris 10 or Solaris 11. Separate them in Virtual Machines, or even Oracle Solaris Zones, monitor and manage those from a central UI. Here the key takeaways once again: The SPARC SuperCluster: Is a pre-integrated Engineered System Contains SPARC T4-4 servers with built-in virtualization, cryptography, dynamic threading Contains the Exadata storage cells that intelligently offload the burden of the DB-nodes  Contains a highly available ZFS Storage Appliance, that provides SAN/NAS storage in a unified way Combines all these elements over a high-speed, low-latency backbone network implemented with InfiniBand Can grow from a single half-rack to several full-rack size Supports the consolidation of hundreds of applications To summarize: All these technologies are great by themselves, but the real value is like in every other Oracle Engineered System: Integration. All these technologies are tuned to perform together. Together they are way more than the sum of all - and a careful and actually very time consuming integration process is necessary to orchestrate all these for performance. The SPARC SuperCluster's goal is to enable infrastructure operations and offer a pre-integrated solution that can be architected and delivered in hours instead of months of evaluations and tests. The tedious and most importantly time and resource consuming part of the work - testing and evaluating - has been done.  Now go, provide services.   -- charlie  

    Read the article

  • ASP.NET MVC: Using ProfileRequiredAttribute to restrict access to pages

    - by DigiMortal
    If you are using AppFabric Access Control Services to authenticate users when they log in to your community site using Live ID, Google or some other popular identity provider, you need more than AuthorizeAttribute to make sure that users can access the content that is there for authenticated users only. In this posting I will show you hot to extend the AuthorizeAttribute so users must also have user profile filled. Semi-authorized users When user is authenticated through external identity provider then not all identity providers give us user name or other information we ask users when they join with our site. What all identity providers have in common is unique ID that helps you identify the user. Example. Users authenticated through Windows Live ID by AppFabric ACS have no name specified. Google’s identity provider is able to provide you with user name and e-mail address if user agrees to publish this information to you. They both give you unique ID of user when user is successfully authenticated in their service. There is logical shift between ASP.NET and my site when considering user as authorized. For ASP.NET MVC user is authorized when user has identity. For my site user is authorized when user has profile and row in my users table. Having profile means that user has unique username in my system and he or she is always identified by this username by other users. My solution is simple: I created my own action filter attribute that makes sure if user has profile to access given method and if user has no profile then browser is redirected to join page. Illustrating the problem Usually we restrict access to page using AuthorizeAttribute. Code is something like this. [Authorize] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } If this page is only for site users and we have user profiles then all users – the ones that have profile and all the others that are just authenticated – can access the information. It is okay because all these users have successfully logged in in some service that is supported by AppFabric ACS. In my site the users with no profile are in grey spot. They are on half way to be users because they have no username and profile on my site yet. So looking at the image above again we need something that adds profile existence condition to user-only content. [ProfileRequired] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } Now, this attribute will solve our problem as soon as we implement it. ProfileRequiredAttribute: Profiles are required to be fully authorized Here is my implementation of ProfileRequiredAttribute. It is pretty new and right now it is more like working draft but you can already play with it. public class ProfileRequiredAttribute : AuthorizeAttribute {     private readonly string _redirectUrl;       public ProfileRequiredAttribute()     {         _redirectUrl = ConfigurationManager.AppSettings["JoinUrl"];         if (string.IsNullOrWhiteSpace(_redirectUrl))             _redirectUrl = "~/";     }              public override void OnAuthorization(AuthorizationContext filterContext)     {         base.OnAuthorization(filterContext);           var httpContext = filterContext.HttpContext;         var identity = httpContext.User.Identity;           if (!identity.IsAuthenticated || identity.GetProfile() == null)             if(filterContext.Result == null)                 httpContext.Response.Redirect(_redirectUrl);          } } All methods with this attribute work as follows: if user is not authenticated then he or she is redirected to AppFabric ACS identity provider selection page, if user is authenticated but has no profile then user is by default redirected to main page of site but if you have application setting with name JoinUrl then user is redirected to this URL. First case is handled by AuthorizeAttribute and the second one is handled by custom logic in ProfileRequiredAttribute class. GetProfile() extension method To get user profile using less code in places where profiles are needed I wrote GetProfile() extension method for IIdentity interface. There are some more extension methods that read out user and identity provider identifier from claims and based on this information user profile is read from database. If you take this code with copy and paste I am sure it doesn’t work for you but you get the idea. public static User GetProfile(this IIdentity identity) {     if (identity == null)         return null;       var context = HttpContext.Current;     if (context.Items["UserProfile"] != null)         return context.Items["UserProfile"] as User;       var provider = identity.GetIdentityProvider();     var nameId = identity.GetNameIdentifier();       var rep = ObjectFactory.GetInstance<IUserRepository>();     var profile = rep.GetUserByProviderAndNameId(provider, nameId);       context.Items["UserProfile"] = profile;       return profile; } To avoid round trips to database I cache user profile to current request because the chance that profile gets changed meanwhile is very minimal. The other reason is maybe more tricky – profile objects are coming from Entity Framework context and context has also HTTP request as lifecycle. Conclusion This posting gave you some ideas how to finish user profiles stuff when you use AppFabric ACS as external authentication provider. Although there was little shift between us and ASP.NET MVC with interpretation of “authorized” we were easily able to solve the problem by extending AuthorizeAttribute to get all our requirements fulfilled. We also write extension method for IIdentity that returns as user profile based on username and caches the profile in HTTP request scope.

    Read the article

  • WebSocket Applications using Java: JSR 356 Early Draft Now Available (TOTD #183)

    - by arungupta
    WebSocket provide a full-duplex and bi-directional communication protocol over a single TCP connection. JSR 356 is defining a standard API for creating WebSocket applications in the Java EE 7 Platform. This Tip Of The Day (TOTD) will provide an introduction to WebSocket and how the JSR is evolving to support the programming model. First, a little primer on WebSocket! WebSocket is a combination of IETF RFC 6455 Protocol and W3C JavaScript API (still a Candidate Recommendation). The protocol defines an opening handshake and data transfer. The API enables Web pages to use the WebSocket protocol for two-way communication with the remote host. Unlike HTTP, there is no need to create a new TCP connection and send a chock-full of headers for every message exchange between client and server. The WebSocket protocol defines basic message framing, layered over TCP. Once the initial handshake happens using HTTP Upgrade, the client and server can send messages to each other, independent from the other. There are no pre-defined message exchange patterns of request/response or one-way between client and and server. These need to be explicitly defined over the basic protocol. The communication between client and server is pretty symmetric but there are two differences: A client initiates a connection to a server that is listening for a WebSocket request. A client connects to one server using a URI. A server may listen to requests from multiple clients on the same URI. Other than these two difference, the client and server behave symmetrically after the opening handshake. In that sense, they are considered as "peers". After a successful handshake, clients and servers transfer data back and forth in conceptual units referred as "messages". On the wire, a message is composed of one or more frames. Application frames carry payload intended for the application and can be text or binary data. Control frames carry data intended for protocol-level signaling. Now lets talk about the JSR! The Java API for WebSocket is worked upon as JSR 356 in the Java Community Process. This will define a standard API for building WebSocket applications. This JSR will provide support for: Creating WebSocket Java components to handle bi-directional WebSocket conversations Initiating and intercepting WebSocket events Creation and consumption of WebSocket text and binary messages The ability to define WebSocket protocols and content models for an application Configuration and management of WebSocket sessions, like timeouts, retries, cookies, connection pooling Specification of how WebSocket application will work within the Java EE security model Tyrus is the Reference Implementation for JSR 356 and is already integrated in GlassFish 4.0 Promoted Builds. And finally some code! The API allows to create WebSocket endpoints using annotations and interface. This TOTD will show a simple sample using annotations. A subsequent blog will show more advanced samples. A POJO can be converted to a WebSocket endpoint by specifying @WebSocketEndpoint and @WebSocketMessage. @WebSocketEndpoint(path="/hello")public class HelloBean {     @WebSocketMessage    public String sayHello(String name) {         return "Hello " + name + "!";     }} @WebSocketEndpoint marks this class as a WebSocket endpoint listening at URI defined by the path attribute. The @WebSocketMessage identifies the method that will receive the incoming WebSocket message. This first method parameter is injected with payload of the incoming message. In this case it is assumed that the payload is text-based. It can also be of the type byte[] in case the payload is binary. A custom object may be specified if decoders attribute is specified in the @WebSocketEndpoint. This attribute will provide a list of classes that define how a custom object can be decoded. This method can also take an optional Session parameter. This is injected by the runtime and capture a conversation between two endpoints. The return type of the method can be String, byte[] or a custom object. The encoders attribute on @WebSocketEndpoint need to define how a custom object can be encoded. The client side is an index.jsp with embedded JavaScript. The JSP body looks like: <div style="text-align: center;"> <form action="">     <input onclick="say_hello()" value="Say Hello" type="button">         <input id="nameField" name="name" value="WebSocket" type="text"><br>    </form> </div> <div id="output"></div> The code is relatively straight forward. It has an HTML form with a button that invokes say_hello() method and a text field named nameField. A div placeholder is available for displaying the output. Now, lets take a look at some JavaScript code: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/HelloWebSocket/hello";     var websocket = new WebSocket(wsUri);     websocket.onopen = function(evt) { onOpen(evt) };     websocket.onmessage = function(evt) { onMessage(evt) };     websocket.onerror = function(evt) { onError(evt) };     function init() {         output = document.getElementById("output");     }     function say_hello() {      websocket.send(nameField.value);         writeToScreen("SENT: " + nameField.value);     } This application is deployed as "HelloWebSocket.war" (download here) on GlassFish 4.0 promoted build 57. So the WebSocket endpoint is listening at "ws://localhost:8080/HelloWebSocket/hello". A new WebSocket connection is initiated by specifying the URI to connect to. The JavaScript API defines callback methods that are invoked when the connection is opened (onOpen), closed (onClose), error received (onError), or a message from the endpoint is received (onMessage). The client API has several send methods that transmit data over the connection. This particular script sends text data in the say_hello method using nameField's value from the HTML shown earlier. Each click on the button sends the textbox content to the endpoint over a WebSocket connection and receives a response based upon implementation in the sayHello method shown above. How to test this out ? Download the entire source project here or just the WAR file. Download GlassFish4.0 build 57 or later and unzip. Start GlassFish as "asadmin start-domain". Deploy the WAR file as "asadmin deploy HelloWebSocket.war". Access the application at http://localhost:8080/HelloWebSocket/index.jsp. After clicking on "Say Hello" button, the output would look like: Here are some references for you: WebSocket - Protocol and JavaScript API JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API Capturing WebSocket on-the-wire messages

    Read the article

  • Pet Peeves with the Windows Phone 7 Marketplace

    - by Bil Simser
    Have you ever noticed how something things just gnaw at your very being. This is the case with the WP7 marketplace, the Zune software, and the things that drive me batshit crazy with a side of fries. To go. I wanted to share. XBox Live is Not the Centre of the Universe Okay, it’s fine that the Zune software has an XBox live tag for games so can see them clearly but do we really need to have it shoved down our throats. On every click? Click on Games in the marketplace: The first thing that it defaults to on the filters on the right is XBox Live: Okay. Fine. However if you change it (say to Paid) then click onto a title when you come back from that title is the filter still set to Paid? No. It’s back to XBox Live again. Really? Give us a break. If you change to any filter on any other genre then click on the selected title, it doesn’t revert back to anything. It stays on the selection you picked. Let’s be fair here. The Games genre should behave just like every other one. If I pick Paid then when I come back to the list please remember that. Double Dipping On the subject of XBox Live titles, Microsoft (and developers who have an agreement with Microsoft to produce Live titles, which generally rules out indie game developers) is double dipping with regards to exposure of their titles. Here’s the Puzzle and Trivia Game section on the Marketplace for XBox Live titles: And here’s the same category filtered on Paid titles: See the problem? Two indie titles while the rest are XBox Live ones. So while XBL has it’s filter, they also get to showcase their wares in the Paid and Free filters as well. If you’re going to have an XBox Live filter then use it and stop pushing down indie titles until they’re off the screen (on some genres this is already the case). Free and Paid titles should be just that and not include XBox Live ones. If you’re really stoked that people can’t find the Free XBox Live titles vs. the paid ones, then create a Free XBox Live filter and a Paid XBox Live filter. I don’t think we would mind much. Whose Trial is it Anyways? You might notice apps in the marketplace with titles like “My Fart App Professional Lite” or “Silicon Lamb Spleen Builder Free”. When you submit and app to the marketplace it can either be free or paid. If it’s a paid app you also have the option to submit it with Trial capabilities. It’s up to you to decide what you offer in the trial version but trial versions can be purchased from within the app so after someone trys out your app (for free) and wants to unlock the Super Secret Obama Spy Ring Level, they can just go to the marketplace from your app (if you built that functionality in) and upgrade to the paid version. However it creates a rift of sorts when it comes to visibility. Some developers go the route of the paid app with a trial version, others decide to submit *two* apps instead of one. One app is the “Free” or “Lite” verions and the other is the paid version. Why go to the hassle of submitting two apps when you can just create a trial version in the same app? Again, visibility. There’s no way to tell Paid apps with Trial versions and ones without (it’s an option, you don’t have to provide trial versions, although I think it’s a good idea). However there is a way to see the Free apps from the Paid ones so some submit the two apps and have the Free version have links to buy the paid one (again through the Marketplace tasks in the API). What we as developers need for visibility is a new filter. Trial. That’s it. It would simply filter on Paid apps that have trial capabilities and surface up those apps just like the free ones. If Microsoft added this filter to the marketplace, it would eliminate the need for people to submit their “Free” and “Lite” versions and make it easier for the developer not to have to maintain two systems. I mean, is it really that hard? Can’t be any more difficult than the XBox Live Filter that’s already there. Location is Everything The last thing on my bucket list is about location. When I launch Zune I’m running in my native location setting, Canada. What’s great is that I navigate to the Travel Tools section where I have one of my apps and behold the splendour that I see: There are my apps in the number 1 and number 4 slot for top selling in that category. I show it to my wife to make up for the sleepless nights writing this stuff and we dance around and celebrate. Then I change my location on my operation system to United States and re-launch Zune. WTF? My flight app has slipped to the 10th spot (I’m only showing 4 across here out of the 7 in Zune) and my border check app that was #1 is now in the 32nd spot! End of celebration. Not only is relevance being looked at here, I value the comments people make on may apps as do most developers. I want to respond to them and show them that I’m listening. The next version of my border app will provide multiple camera angles. However when I’m running in my native Canada location, I only see two reviews. Changing over to United States I see fourteen! While there are tools out there to provide with you a unified view, I shouldn’t have to rely on them. My own Zune desktop software should allow me to see everything. I realize that some developers will submit an app and only target it for some locations and that’s their choice. However I shouldn’t have to jump through hoops to see what apps are ahead of mine, or see people comments and ratings. Another proposal. Either unify the marketplace (i.e. when I’m looking at it show me everything combined) or let me choose a filter. I think the first option might be difficult as you’re trying to average out top selling apps across all markets and have to deal with some apps that have been omitted from some markets. Although I think you could come up with a set of use cases that would handle that, maybe that’s too much work. At the very least, let us developers view the markets in a drop down or something from within the Zune desktop. Having to shut down Zune, change our location, and re-launch Zune to see other perspectives is just too onerous. A Call to Action These are just one mans opinion. Do you agree? Disagree? Feel hungry for a bacon sandwich? Let everyone know via the comments below. Perhaps someone from Microsoft will be reading and take some of these ideas under advisement. Maybe not, but at least let’s get the word out that we really want to see some change. Egypt can do it, why not WP7 developers!

    Read the article

  • Poner aplicaci&oacute;n Asp.Net en modo OFFLINE

    - by Jason Ulloa
    Una de las opciones que todo aplicación debería tener es el poder ponerse en modo OFFLINE para evitar el acceso de usuarios. Esto es completamente necesario cuando queremos realizar cambios a nuestra aplicación (cambiar algo, poner una actualización, etc) o a nuestra base de datos y evitarnos problemas con los usuarios que se encuentren logueados dentro de la aplicación en ese momento. Muchos ejemplos a través de la Web exponen la forma de realizar esta tarea utilizando dos técnicas: 1. La primera de ellas es utilizar el archivo App_Offline.htm sin embargo, esta técnica tiene un inconveniente. Y es que, una vez que hemos subido el archivo a nuestra aplicación esta se bloquea completamente y no tenemos forma de volver a ponerla ONLINE a menos que eliminemos el archivo. Es decir no podemos controlarla. 2. La segunda de ellas es el utilizar la etiqueta httpRuntime, pero nuevamente tenemos el mismo problema. Al habilitar el modo OFFLINE mediante esta etiqueta, tampoco podremos acceder a un modo de administración para cambiarla. Un ejemplo de la etiqueta httpRuntime <configuration> <system.web> <httpRuntime enable="false" /> </system.web> </configuration>   Tomando en cuenta lo anterior, lo mas optimo seria que podamos por medio de alguna pagina de administración colocar nuestro sitio en modo OFFLINE, pero manteniendo el acceso a la pagina de administración para poder volver a cambiar el valor que pondrá nuestra aplicación nuevamente en modo ONLINE. Para ello, utilizaremos el web.config de nuestra aplicación y una pequeña clase que se encargara de Leer y escribir los valores. Lo primero será, abrir nuestro web.config y definir dentro del appSettings dos nuevas KEY que contendrán los valores para el modo OFFLINE de nuestra aplicación: <appSettings> <add key="IsOffline" value="false" /> <add key="IsOfflineMessage" value="Sistema temporalmente no disponible por tareas de mantenimiento." /> </appSettings>   En las KEY anteriores tenemos el IsOffLine con value de false, esto es para indicarle a nuestra aplicación que actualmente su modo de funcionamiento es ONLINE, este valor será el que posteriormente cambiemos a TRUE para volver al modo OFFLINE. Nuestra segunda KEY (IsOfflineMessage) posee el value (Sistema temporalmente….) que será mostrado al usuario como un mensaje cuando el sitio este en modo OFFLINE. Una vez definidas nuestras dos KEY en el web.config, escribiremos una clase personalizada para leer y escribir los valores. Así que, agregamos un nuevo elemento de tipo clase al proyecto llamado SettingsRules y la definimos como Public. Está clase contendrá dos métodos, el primero será para leer los valores: public string readIsOnlineSettings(string sectionToRead) { Configuration cfg = WebConfigurationManager.OpenWebConfiguration(System.Web.Hosting.HostingEnvironment.ApplicationVirtualPath); KeyValueConfigurationElement isOnlineSettings = (KeyValueConfigurationElement)cfg.AppSettings.Settings[sectionToRead]; return isOnlineSettings.Value; }   El segundo método, será el encargado de escribir los nuevos valores al web.config public bool saveIsOnlineSettings(string sectionToWrite, string value) { bool succesFullySaved;   try { Configuration cfg = WebConfigurationManager.OpenWebConfiguration(System.Web.Hosting.HostingEnvironment.ApplicationVirtualPath); KeyValueConfigurationElement repositorySettings = (KeyValueConfigurationElement)cfg.AppSettings.Settings[sectionToWrite];   if (repositorySettings != null) { repositorySettings.Value = value; cfg.Save(ConfigurationSaveMode.Modified); } succesFullySaved = true; } catch (Exception) { succesFullySaved = false; } return succesFullySaved; }   Por último, definiremos en nuestra clase una región llamada instance, que contendrá un método encargado de devolver una instancia de la clase (esto para no tener que hacerlo luego) #region instance   private static SettingsRules m_instance;   // Properties public static SettingsRules Instance { get { if (m_instance == null) { m_instance = new SettingsRules(); } return m_instance; } }   #endregion instance   Con esto, nuestra clase principal esta completa. Así que pasaremos a la implementación de las páginas y el resto de código que completará la funcionalidad.   Para complementar la tarea del web.config utilizaremos el fabuloso GLOBAL.ASAX, este contendrá el código encargado de detectar si nuestra aplicación tiene el valor de ONLINE o OFFLINE y además de bloquear todas las paginas y directorios excepto el que le hayamos definido como administrador, esto para luego poder volver a configurar el sitio.   El evento del Global.Asax que utilizaremos será el Application_BeginRequest   protected void Application_BeginRequest(Object sender, EventArgs e) {   if (Convert.ToBoolean(SettingsRules.Instance.readIsOnlineSettings("IsOffline"))) {   string Virtual = Request.Path.Substring(0, Request.Path.LastIndexOf("/") + 1);   if (Virtual.ToLower().IndexOf("/admin/") == -1) { //We don't makes action, is admin section Server.Transfer("~/TemporarilyOfflineMessage.aspx"); }   } } La primer Línea del IF, verifica si el atributo del web.config es True o False, si es true toma la dirección WEB que se ha solicitado y la incluimos en un IF para verificar si corresponde a la Sección admin (está sección no es mas que un folder en nuestra aplicación llamado admin y puede ser cambiado a cualquier otro). Si el resultado de ese if es –1 quiere decir que no coincide, entonces, esa será la bandera que nos permitirá bloquear inmediatamente la pagina actual, transfiriendo al usuario a una pagina de mantenimiento. Ahora, en nuestra carpeta Admin crearemos una nueva pagina asp.net llamada OnlineSettings.aspx para actualizar y leer los datos del web.config y una pagina Default.aspx para pruebas. Nuestra página OnlineSettings tendrá dos pasos importantes: 1. Leer los datos actuales de configuración protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { IsOffline.Checked = Convert.ToBoolean(mySettings.readIsOnlineSettings("IsOffline")); OfflineMessage.Text = mySettings.readIsOnlineSettings("IsOfflineMessage"); } }   2. Actualizar los datos con los nuevos valores. protected void UpdateButton_Click(object sender, EventArgs e) { string htmlMessage = OfflineMessage.Text.Replace(Environment.NewLine, "<br />");   // Update the Application variables Application.Lock(); if (IsOffline.Checked) { mySettings.saveIsOnlineSettings("IsOffline", "True"); mySettings.saveIsOnlineSettings("IsOfflineMessage", htmlMessage); } else { mySettings.saveIsOnlineSettings("IsOffline", "false"); mySettings.saveIsOnlineSettings("IsOfflineMessage", htmlMessage); }   Application.UnLock(); }   Por último en la raíz de la aplicación, crearemos una nueva página aspx llamada TemporarilyOfflineMessage.aspx que será la que se muestre cuando se bloquee la aplicación. Al final nuestra aplicación se vería algo así Página bloqueada Configuración del Bloqueo Y para terminar la aplicación de ejemplo

    Read the article

  • Refactoring a Single Rails Model with large methods & long join queries trying to do everything

    - by Kelseydh
    I have a working Ruby on Rails Model that I suspect is inefficient, hard to maintain, and full of unnecessary SQL join queries. I want to optimize and refactor this Model (Quiz.rb) to comply with Rails best practices, but I'm not sure how I should do it. The Rails app is a game that has Missions with many Stages. Users complete Stages by answering Questions that have correct or incorrect Answers. When a User tries to complete a stage by answering questions, the User gets a Quiz entry with many Attempts. Each Attempt records an Answer submitted for that Question within the Stage. A user completes a stage or mission by getting every Attempt correct, and their progress is tracked by adding a new entry to the UserMission & UserStage join tables. All of these features work, but unfortunately the Quiz.rb Model has been twisted to handle almost all of it exclusively. The callbacks began at 'Quiz.rb', and because I wasn't sure how to leave the Quiz Model during a multi-model update, I resorted to using Rails Console to have the @quiz instance variable via self.some_method do all the heavy lifting to retrieve every data value for the game's business logic; resulting in large extended join queries that "dance" all around the Database schema. The Quiz.rb Model that Smells: class Quiz < ActiveRecord::Base belongs_to :user has_many :attempts, dependent: :destroy before_save :check_answer before_save :update_user_mission_and_stage accepts_nested_attributes_for :attempts, :reject_if => lambda { |a| a[:answer_id].blank? }, :allow_destroy => true #Checks every answer within each quiz, adding +1 for each correct answer #within a stage quiz, and -1 for each incorrect answer def check_answer stage_score = 0 self.attempts.each do |attempt| if attempt.answer.correct? == true stage_score += 1 elsif attempt.answer.correct == false stage_score - 1 end end stage_score end def winner return true end def update_user_mission_and_stage ####### #Step 1: Checks if UserMission exists, finds or creates one. #if no UserMission for the current mission exists, creates a new UserMission if self.user_has_mission? == false @user_mission = UserMission.new(user_id: self.user.id, mission_id: self.current_stage.mission_id, available: true) @user_mission.save else @user_mission = self.find_user_mission end ####### #Step 2: Checks if current UserStage exists, stops if true to prevent duplicate entry if self.user_has_stage? @user_mission.save return true else ####### ##Step 3: if step 2 returns false: ##Initiates UserStage creation instructions #checks for winner (winner actions need to be defined) if they complete last stage of last mission for a given orientation if self.passed? && self.is_last_stage? && self.is_last_mission? create_user_stage_and_update_user_mission self.winner #NOTE: The rest are the same, but specify conditions that are available to add badges or other actions upon those conditions occurring: ##if user completes first stage of a mission elsif self.passed? && self.is_first_stage? && self.is_first_mission? create_user_stage_and_update_user_mission #creates user badge for finishing first stage of first mission self.user.add_badge(5) self.user.activity_logs.create(description: "granted first-stage badge", type_event: "badge", value: "first-stage") #If user completes last stage of a given mission, creates a new UserMission elsif self.passed? && self.is_last_stage? && self.is_first_mission? create_user_stage_and_update_user_mission #creates user badge for finishing first mission self.user.add_badge(6) self.user.activity_logs.create(description: "granted first-mission badge", type_event: "badge", value: "first-mission") elsif self.passed? create_user_stage_and_update_user_mission else self.passed? == false return true end end end #Creates a new UserStage record in the database for a successful Quiz question passing def create_user_stage_and_update_user_mission @nu_stage = @user_mission.user_stages.new(user_id: self.user.id, stage_id: self.current_stage.id) @nu_stage.save @user_mission.save self.user.add_points(50) end #Boolean that defines passing a stage as answering every question in that stage correct def passed? self.check_answer >= self.number_of_questions end #Returns the number of questions asked for that stage's quiz def number_of_questions self.attempts.first.answer.question.stage.questions.count end #Returns the current_stage for the Quiz, routing through 1st attempt in that Quiz def current_stage self.attempts.first.answer.question.stage end #Gives back the position of the stage relative to its mission. def stage_position self.attempts.first.answer.question.stage.position end #will find the user_mission for the current user and stage if it exists def find_user_mission self.user.user_missions.find_by_mission_id(self.current_stage.mission_id) end #Returns true if quiz was for the last stage within that mission #helpful for triggering actions related to a user completing a mission def is_last_stage? self.stage_position == self.current_stage.mission.stages.last.position end #Returns true if quiz was for the first stage within that mission #helpful for triggering actions related to a user completing a mission def is_first_stage? self.stage_position == self.current_stage.mission.stages_ordered.first.position end #Returns true if current user has a UserMission for the current stage def user_has_mission? self.user.missions.ids.include?(self.current_stage.mission.id) end #Returns true if current user has a UserStage for the current stage def user_has_stage? self.user.stages.include?(self.current_stage) end #Returns true if current user is on the last mission based on position within a given orientation def is_first_mission? self.user.missions.first.orientation.missions.by_position.first.position == self.current_stage.mission.position end #Returns true if current user is on the first stage & mission of a given orientation def is_last_mission? self.user.missions.first.orientation.missions.by_position.last.position == self.current_stage.mission.position end end My Question Currently my Rails server takes roughly 500ms to 1 sec to process single @quiz.save action. I am confident that the slowness here is due to sloppy code, not bad Database ERD design. What does a better solution look like? And specifically: Should I use join queries to retrieve values like I did here, or is it better to instantiate new objects within the model instead? Or am I missing a better solution? How should update_user_mission_and_stage be refactored to follow best practices? Relevant Code for Reference: quizzes_controller.rb w/ Controller Route Initiating Callback: class QuizzesController < ApplicationController before_action :find_stage_and_mission before_action :find_orientation before_action :find_question def show end def create @user = current_user @quiz = current_user.quizzes.new(quiz_params) if @quiz.save if @quiz.passed? if @mission.next_mission.nil? && @stage.next_stage.nil? redirect_to root_path, notice: "Congratulations, you have finished the last mission!" elsif @stage.next_stage.nil? redirect_to [@mission.next_mission, @mission.first_stage], notice: "Correct! Time for Mission #{@mission.next_mission.position}", info: "Starting next mission" else redirect_to [@mission, @stage.next_stage], notice: "Answer Correct! You passed the stage!" end else redirect_to [@mission, @stage], alert: "You didn't get every question right, please try again." end else redirect_to [@mission, @stage], alert: "Sorry. We were unable to save your answer. Please contact the admministrator." end @questions = @stage.questions.all end private def find_stage_and_mission @stage = Stage.find(params[:stage_id]) @mission = @stage.mission end def find_question @question = @stage.questions.find_by_id params[:id] end def quiz_params params.require(:quiz).permit(:user_id, :attempt_id, {attempts_attributes: [:id, :quiz_id, :answer_id]}) end def find_orientation @orientation = @mission.orientation @missions = @orientation.missions.by_position end end Overview of Relevant ERD Database Relationships: Mission - Stage - Question - Answer - Attempt <- Quiz <- User Mission - UserMission <- User Stage - UserStage <- User Other Models: Mission.rb class Mission < ActiveRecord::Base belongs_to :orientation has_many :stages has_many :user_missions, dependent: :destroy has_many :users, through: :user_missions #SCOPES scope :by_position, -> {order(position: :asc)} def stages_ordered stages.order(:position) end def next_mission self.orientation.missions.find_by_position(self.position.next) end def first_stage next_mission.stages_ordered.first end end Stage.rb: class Stage < ActiveRecord::Base belongs_to :mission has_many :questions, dependent: :destroy has_many :user_stages, dependent: :destroy has_many :users, through: :user_stages accepts_nested_attributes_for :questions, reject_if: :all_blank, allow_destroy: true def next_stage self.mission.stages.find_by_position(self.position.next) end end Question.rb class Question < ActiveRecord::Base belongs_to :stage has_many :answers, dependent: :destroy accepts_nested_attributes_for :answers, :reject_if => lambda { |a| a[:body].blank? }, :allow_destroy => true end Answer.rb: class Answer < ActiveRecord::Base belongs_to :question has_many :attempts, dependent: :destroy end Attempt.rb: class Attempt < ActiveRecord::Base belongs_to :answer belongs_to :quiz end User.rb: class User < ActiveRecord::Base belongs_to :school has_many :activity_logs has_many :user_missions, dependent: :destroy has_many :missions, through: :user_missions has_many :user_stages, dependent: :destroy has_many :stages, through: :user_stages has_many :orientations, through: :school has_many :quizzes, dependent: :destroy has_many :attempts, through: :quizzes def latest_stage_position self.user_missions.last.user_stages.last.stage.position end end UserMission.rb class UserMission < ActiveRecord::Base belongs_to :user belongs_to :mission has_many :user_stages, dependent: :destroy end UserStage.rb class UserStage < ActiveRecord::Base belongs_to :user belongs_to :stage belongs_to :user_mission end

    Read the article

  • Tracing Silex from PHP to the OS with DTrace

    - by cj
    In this blog post I show the full stack tracing of Brendan Gregg's php_syscolors.d script in the DTrace Toolkit. The Toolkit contains a dozen very useful PHP DTrace scripts and many more scripts for other languages and the OS. For this example, I'll trace the PHP micro framework Silex, which was the topic of the second of two talks by Dustin Whittle at a recent SF PHP Meetup. His slides are at Silex: From Micro to Full Stack. Installing DTrace and PHP The php_syscolors.d script uses some static PHP probes and some kernel probes. For Oracle Linux I discussed installing DTrace and PHP in DTrace PHP Using Oracle Linux 'playground' Pre-Built Packages. On other platforms with DTrace support, follow your standard procedures to enable DTrace and load the correct providers. The sdt and systrace providers are required in addition to fasttrap. On Oracle Linux, I loaded the DTrace modules like: # modprobe fasttrap # modprobe sdt # modprobe systrace # chmod 666 /dev/dtrace/helper Installing the DTrace Toolkit I download DTraceToolkit-0.99.tar.gz and extracted it: $ tar -zxf DTraceToolkit-0.99.tar.gz The PHP scripts are in the Php directory and examples in the Examples directory. Installing Silex I downloaded the "fat" Silex .tgz file from the download page and extracted it: $ tar -zxf silex_fat.tgz I changed the demonstration silex/web/index.php so I could use the PHP development web server: <?php // web/index.php $filename = __DIR__.preg_replace('#(\?.*)$#', '', $_SERVER['REQUEST_URI']); if (php_sapi_name() === 'cli-server' && is_file($filename)) { return false; } require_once __DIR__.'/../vendor/autoload.php'; $app = new Silex\Application(); //$app['debug'] = true; $app->get('/hello', function() { return 'Hello!'; }); $app->run(); ?> Running DTrace The php_syscolors.d script uses the -Z option to dtrace, so it can be started before PHP, i.e. when there are zero of the requested probes available to be traced. I ran DTrace like: # cd DTraceToolkit-0.99/Php # ./php_syscolors.d Next, I started the PHP developer web server in a second terminal: $ cd silex $ php -S localhost:8080 -t web web/index.php At this point, the web server is idle, waiting for requests. DTrace is idle, waiting for the probes in php_syscolors.d to be fired, at which time the action associated with each probe will run. I then loaded the demonstration page in a browser: http://localhost:8080/hello When the request was fulfilled and the simple output of "Hello" was displayed, I ^C'd php and dtrace in their terminals to stop them. DTrace output over a thousand lines long had been generated. Here is one snippet from when run() was invoked: C PID/TID DELTA(us) FILE:LINE TYPE -- NAME ... 1 4765/4765 21 Application.php:487 func -> run 1 4765/4765 29 ClassLoader.php:182 func -> loadClass 1 4765/4765 17 ClassLoader.php:198 func -> findFile 1 4765/4765 31 ":- syscall -> access 1 4765/4765 26 ":- syscall <- access 1 4765/4765 16 ClassLoader.php:198 func <- findFile 1 4765/4765 25 ":- syscall -> newlstat 1 4765/4765 15 ":- syscall <- newlstat 1 4765/4765 13 ":- syscall -> newlstat 1 4765/4765 13 ":- syscall <- newlstat 1 4765/4765 22 ":- syscall -> newlstat 1 4765/4765 14 ":- syscall <- newlstat 1 4765/4765 15 ":- syscall -> newlstat 1 4765/4765 60 ":- syscall <- newlstat 1 4765/4765 13 ":- syscall -> newlstat 1 4765/4765 13 ":- syscall <- newlstat 1 4765/4765 20 ":- syscall -> open 1 4765/4765 16 ":- syscall <- open 1 4765/4765 26 ":- syscall -> newfstat 1 4765/4765 12 ":- syscall <- newfstat 1 4765/4765 17 ":- syscall -> newfstat 1 4765/4765 12 ":- syscall <- newfstat 1 4765/4765 12 ":- syscall -> newfstat 1 4765/4765 12 ":- syscall <- newfstat 1 4765/4765 20 ":- syscall -> mmap 1 4765/4765 14 ":- syscall <- mmap 1 4765/4765 3201 ":- syscall -> mmap 1 4765/4765 27 ":- syscall <- mmap 1 4765/4765 1233 ":- syscall -> munmap 1 4765/4765 53 ":- syscall <- munmap 1 4765/4765 15 ":- syscall -> close 1 4765/4765 13 ":- syscall <- close 1 4765/4765 34 Request.php:32 func -> main 1 4765/4765 22 Request.php:32 func <- main 1 4765/4765 31 ClassLoader.php:182 func <- loadClass 1 4765/4765 33 Request.php:249 func -> createFromGlobals 1 4765/4765 29 Request.php:198 func -> __construct 1 4765/4765 24 Request.php:218 func -> initialize 1 4765/4765 26 ClassLoader.php:182 func -> loadClass 1 4765/4765 89 ClassLoader.php:198 func -> findFile 1 4765/4765 43 ":- syscall -> access ... The output shows PHP functions being called and returning (and where they are located) and which system calls the PHP functions in turn invoked. The time each line took from the previous one is displayed in the third column. The first column is the CPU number. In this example, the process was always on CPU 1 so the output is naturally ordered without requiring post-processing, or the D script requiring to be modified to display a time stamp. On a terminal, the output of php_syscolors.d is color-coded according to whether each function is a PHP or system one, hence the file name. Summary With one tool, I was able to trace the interaction of a user application with the operating system. I was able to do this to an application running "live" in a web context. The DTrace Toolkit provides a very handy repository of DTrace information. Even though the PHP scripts were created in the time frame of the original PHP DTrace PECL extension, which only had PHP function entry and return probes, the scripts provide core examples for custom investigation and resolution scripts. You can easily adapt the ideas and and create scripts using the other PHP static probes, which are listed in the PHP Manual. Because DTrace is "always on", you can take advantage of it to resolve development questions or fix production situations.

    Read the article

  • Rebuilding CoasterBuzz, Part III: The architecture using the "Web stack of love"

    - by Jeff
    This is the third post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch in the next month or two. More: Part I: Evolution, and death to WCF Part II: Hot data objects I finally hit a point in the re-do of CoasterBuzz where I feel like the major pieces are in place... rewritten, ported and what not, so that I can focus now on front-end design and more interesting creative problems. I've been asked on more than one occasion (OK, just twice) what's going on under the covers, so I figure this might be a good time to explain the overall architecture. As it turns out, I'm using a whole lof of the "Web stack of love," as Scott Hanselman likes to refer to it. Oh that Hanselman. First off, at the center of it all, is BizTalk. Just kidding. That's "enterprise architecture" humor, where every discussion starts with how they'll use BizTalk. Here are the bigger moving parts: It's fairly straight forward. A common library lives in a number of Web apps, all of which are (or will be) powered by ASP.NET MVC 4. They all talk to the same database. There is the main Web site, which also has the endpoint for the Silverlight-based Feed app. The cstr.bz site handles redirects, which are generated when news items are published and sent to Twitter. Facebook publishing is handled via the RSS Graffiti Facebook app. The API site handles requests from the Windows Phone app. The main site depends very heavily on POP Forums, the open source, MVC-based forum I maintain. It serves a number of functions, primarily handling users. These user objects serve in non-forum roles to handle things like news and database contributions, maintaining track records (coaster nerd for "list of rides I've been on") and, perhaps most importantly, paid club memberships. Before I get into more specifics, note that the "glue" for everything is Ninject, the dependency injection framework. I actually prefer StructureMap these days, but I started with Ninject in POP Forums a long time ago. POP Forums has a static class, PopForumsActivation, that new's up an instance of the container, and you can call it from where ever. The downside is that the forums require Ninject in your MVC app as the default dependency resolver. At some point, I'll decouple it, but for now it's not in the way. In the general sense, the entire set of apps follow a repository-service-controller-view pattern. Repos just do data access, service classes do business logic, controllers compose and route, views view. The forum also provides Scoring Game functionality. The Scoring Game is a reasonably abstract framework to award users points based on certain actions, and then award achievements when a certain number of point events happen. For example, the forum already awards a point when someone plus-one's a post you made. You can set up an achievement that says, "Give the user an award when they've had 100 posts plus'd." It also does zero-point entries into the ledger, so if you make a post, you could award an achievement based on 100 posts made. Wiring in the scoring game to CoasterBuzz functionality is just a matter of going to the Ninject container and getting an instance of the event publisher, and passing it events. Forum adapters were introduced into POP Forums a few versions ago, and they can intercept the model generated for forum topic lists and threads and designate an alternate view. These are used to make the "Day in Pictures" forum, where users can upload photos as frame-by-frame photo threads. Another adapter adds an association UI, so users can associate specific amusement parks with their trip report posts. The Silverlight-based Feed app talks to a simple JSON endpoint in the main app. This uses an underlying library I wrote ages ago, simply called Feeds, that aggregates event information. You inherit from a base class that creates instances of a publisher interface, and then use that class to send it an event type and any number of data fields. Feeds has two publishers: One is to the database, and that's used for the endpoint that talks to the Silverlight app. The second publisher publishes to Twitter, if the event is of the type "news." The wiring is a little strange, because for the new posts and topics events, I'm actually pulling out the forum repository classes from the Ninject container and replacing them with overridden methods to publish. I should probably be doing this at the service class level, but whatever. It's my mess. cstr.bz doesn't do anything interesting. It looks up the path, and if it has a match, does a 301 redirect to the long URL. The API site just serves up JSON for the Windows Phone app. The Windows Phone app is Silverlight, of course, and there isn't much to it. It does use the control toolkit, but beyond that, it relies on a simple class that creates a Webclient and calls the server for JSON to deserialize. The same class is now used by the Feed app, which used to use WCF. Simple is better. Data access in POP Forums is all straight SQL, because a lot of it was ported from the ASP.NET version. Most CoasterBuzz data access is handled by the Entity Framework, using the code-first model. The context class in this case does a lot of work to make sure that the table and key mapping works, since much of it breaks from the normal conventions of EF. One of the more powerful things you can do with EF, once you understand the little gotchas, is split tables by row into different entities. For example, a roller coaster photo has everything in the same row, including the metadata, the thumbnail bytes and the image itself. Obviously, if you want to get a list of photos to iterate over in a view, you don't want to get the image data. The use of navigation properties makes it easier to get just what you want. The front end includes Razor views in MVC, and jQuery is used for client-side goodness. I'm also using jQuery UI in a few places, for tabs, a dialog box and autocomplete. I'm also, tentatively, using jQuery Mobile. I've already ported most forum views to Mobile, but they need some work as v1.1 isn't finished yet. I'm not sure if I'll ship CoasterBuzz with mobile views or not yet. It's on the radar, but not something in my delivery criteria. That covers all of the big frameworks in play. Next time I hope to talk more about the front-end experience, which to me is where most of the fun is these days. Hoping to launch in the next month or two. Getting tired of looking at the old site!

    Read the article

  • Evaluating Solutions to Manage Product Compliance? Don't Wait Much Longer

    - by Kerrie Foy
    Depending on severity, product compliance issues can cause all sorts of problems from run-away budgets to business closures. But effective policies and safeguards can create a strong foundation for innovation, productivity, market penetration and competitive advantage. If you’ve been putting off a systematic approach to product compliance, it is time to reconsider that decision, or indecision. Why now?  No matter what industry, companies face a litany of worldwide and regional regulations that require proof of product compliance and environmental friendliness for market access.  For example, Restriction of Hazardous Substances (RoHS) is a regulation that restricts the use of six dangerous materials used in the manufacture of electronic and electrical equipment.  ROHS was originally adopted by the European Union in 2003 for implementation in 2006, and it has evolved over time through various regional versions for North America, China, Japan, Korea, Norway and Turkey.  In addition, the RoHS directive allowed for material exemptions used in Medical Devices, but that exemption ends in 2014.   Additional regulations worth watching are the Battery Directive, Waste Electrical and Electronic Equipment (WEEE), and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives.  Additional evolving regulations are coming from governing bodies like the Food and Drug Administration (FDA) and the International Organization for Standardization (ISO). Corporate sustainability initiatives are also gaining urgency and influencing product design. In a survey of 405 corporations in the Global 500 by Carbon Disclosure Project, co-written by PwC (CDP Global 500 Climate Change Report 2012 entitled Business Resilience in an Uncertain, Resource-Constrained World), 48% of the respondents indicated they saw potential to create new products and business services as a response to climate change. Just 21% reported a dedicated budget for the research. However, the report goes on to explain that those few companies are winning over new customers and driving additional profits by exploiting their abilities to adapt to environmental needs. The article cites Dell as an example – Dell has invested in research to develop new products designed to reduce its customers’ emissions by more than 10 million metric tons of CO2e per year. This reduction in emissions should save Dell’s customers over $1billion per year as a result! Over time we expect to see many additional companies prove that eco-design provides marketplace benefits through differentiation and direct customer value. How do you meet compliance requirements and also successfully invest in eco-friendly designs? No doubt companies struggle to answer this question. After all, the journey to get there may involve transforming business models, go-to-market strategies, supply networks, quality assurance policies and compliance processes per the rapidly evolving global and regional directives. There may be limited executive focus on the initiative, inability to quantify noncompliance, or not enough resources to justify investment. To make things even more difficult to address, compliance responsibility can be a passionate topic within an organization, making the prospect of change on an enterprise scale problematic and time-consuming. Without a single source of truth for product data and without proper processes in place, ensuring product compliance burgeons into a crushing task that is cost-prohibitive and overwhelming to an organization. With all the overhead, certain markets or demographics become simply inaccessible. Therefore, the risk to consumer goodwill and satisfaction, revenue, business continuity, and market potential is too great not to solve the compliance challenge. Companies are beginning to adapt and even thrive in today’s highly regulated and transparent environment by implementing systematic approaches to product compliance that are more than functional bandages but revenue-generating engines. Consider partnering with Oracle to help you address your compliance needs. Many of the world’s most innovative leaders and pioneers are leveraging Oracle’s Agile Product Lifecycle Management (PLM) portfolio of enterprise applications to manage the product value chain, centralize product data, automate processes, and launch more eco-friendly products to market faster.   Particularly, the Agile Product Governance & Compliance (PG&C) solution provides out-of-the-box functionality to integrate actionable regulatory information into the enterprise product record from the ideation to the disposal/recycling phase. Agile PG&C makes it possible to efficiently manage compliance per corporate green initiatives as well as regional and global directives. Options are critical, but so is ease-of-use. Anyone who’s grappled with compliance policy knows legal interpretation plays a major role in determining how an organization responds to regulation. Agile PG&C gives you the freedom to configure product compliance per your needs, while maintaining rigorous control over the product record in an easy-to-use interface that facilitates adoption efforts. It allows you to assign regulations as specifications for a part or BOM roll-up. Each specification has a threshold value that alerts you to a non-compliance issue if the threshold value is exceeded. Set however many regulations as specifications you need to make sure a product can be sold in your target countries. Another option is to implement like one of our leading consumer electronics customers and define your own “catch-all” specification to ensure compliance in all markets. You can give your suppliers secure access to enter their component data or integrate a third party’s data. With Agile PG&C you are able to design compliance earlier into your products to reduce cost and improve quality downstream when stakes are higher. Agile PG&C is a comprehensive solution that makes product compliance more reliable and efficient. Throughout product lifecycles, use the solution to support full material disclosures, efficiently manage declarations with your suppliers, feed compliance data into a corrective action if a product must be changed, and swiftly satisfy audits by showing all due diligence tracked in one solution. Given the compounding regulation and consumer focus on urgent environmental issues, now is the time to act. Implementing an enterprise, systematic approach to product compliance is a competitive investment. From the start, Agile Product Governance & Compliance enables companies to confidently design for compliance and sustainability, reduce the cost of compliance, minimize the risk of business interruption, deliver responsible products, and inspire new innovation.  Don’t wait any longer! To find out more about Agile Product Governance & Compliance download the data sheet, contact your sales representative, or call Oracle at 1-800-633-0738. Many thanks to Shane Goodwin, Senior Manager, Oracle Agile PLM Product Management, for contributions to this article. 

    Read the article

  • Partner Blog Series: PwC Perspectives Part 2 - Jumpstarting your IAM program with R2

    - by Tanu Sood
    Identity and access management (IAM) isn’t a new concept. Over the past decade, companies have begun to address identity management through a variety of solutions that have primarily focused on provisioning. . The new age workforce is converging at a rapid pace with ever increasing demand to use diverse portfolio of applications and systems to interact and interface with their peers in the industry and customers alike. Oracle has taken a significant leap with their release of Identity and Access Management 11gR2 towards enabling this global workforce to conduct their business in a secure, efficient and effective manner. As companies deal with IAM business drivers, it becomes immediately apparent that holistic, rather than piecemeal, approaches better address their needs. When planning an enterprise-wide IAM solution, the first step is to create a common framework that serves as the foundation on which to build the cost, compliance and business process efficiencies. As a leading industry practice, IAM should be established on a foundation of accurate data for identity management, making this data available in a uniform manner to downstream applications and processes. Mature organizations are looking beyond IAM’s basic benefits to harness more advanced capabilities in user lifecycle management. For any organization looking to embark on an IAM initiative, consider the following use cases in managing and administering user access. Expanding the Enterprise Provisioning Footprint Almost all organizations have some helpdesk resources tied up in handling access requests from users, a distraction from their core job of handling problem tickets. This dependency has mushroomed from the traditional acceptance of provisioning solutions integrating and addressing only a portion of applications in the heterogeneous landscape Oracle Identity Manager (OIM) 11gR2 solves this problem by offering integration with third party ticketing systems as “disconnected applications”. It allows for the existing business processes to be seamlessly integrated into the system and tracked throughout its lifecycle. With minimal effort and analysis, an organization can begin integrating OIM with groups or applications that are involved with manually intensive access provisioning and de-provisioning activities. This aspect of OIM allows organizations to on-board applications and associated business processes quickly using out of box templates and frameworks. This is especially important for organizations looking to fold in users and resources from mergers and acquisitions. Simplifying Access Requests Organizations looking to implement access request solutions often find it challenging to get their users to accept and adopt the new processes.. So, how do we improve the user experience, make it intuitive and personalized and yet simplify the user access process? With R2, OIM helps organizations alleviate the challenge by placing the most used functionality front and centre in the new user request interface. Roles, application accounts, and entitlements can all be found in the same interface as catalog items, giving business users a single location to go to whenever they need to initiate, approve or track a request. Furthermore, if a particular item is not relevant to a user’s job function or area inside the organization, it can be hidden so as to not overwhelm or confuse the user with superfluous options. The ability to customize the user interface to suit your needs helps in exercising the business rules effectively and avoiding access proliferation within the organization. Saving Time with Templates A typical use case that is most beneficial to business users is flexibility to place, edit, and withdraw requests based on changing circumstances and business needs. With OIM R2, multiple catalog items can now be added and removed from the shopping cart, an ecommerce paradigm that many users are already familiar with. This feature can be especially useful when setting up a large number of new employees or granting existing department or group access to a newly integrated application. Additionally, users can create their own shopping cart templates in order to complete subsequent requests more quickly. This feature saves the user from having to search for and select items all over again if a request is similar to a previous one. Advanced Delegated Administration A key feature of any provisioning solution should be to empower each business unit in managing their own access requests. By bringing administration closer to the user, you improve user productivity, enable efficiency and alleviate the administration overhead. To do so requires a federated services model so that the business units capable of shouldering the onus of user life cycle management of their business users can be enabled to do so. OIM 11gR2 offers advanced administrative options for creating, managing and controlling business logic and workflows through easy to use administrative interface and tools that can be exposed to delegated business administrators. For example, these business administrators can establish or modify how certain requests and operations should be handled within their business unit based on a number of attributes ranging from the type of request or the risk level of the individual items requested. Closed-Loop Remediation Security continues to be a major concern for most organizations. Identity management solutions bolster security by ensuring only the right users have the right access to the right resources. To prevent unauthorized access and where it already exists, the ability to detect and remediate it, are key requirements of an enterprise-grade proven solution. But the challenge with most solutions today is that some of this information still exists in silos. And when changes are made to systems directly, not all information is captured. With R2, oracle is offering a comprehensive Identity Governance solution that our customer organizations are leveraging for closed loop remediation that allows for an automated way for administrators to revoke unauthorized access. The change is automatically captured and the action noted for continued management. Conclusion While implementing provisioning solutions, it is important to keep the near term and the long term goals in mind. The provisioning solution should always be a part of a larger security and identity management program but with the ability to seamlessly integrate not only with the company’s infrastructure but also have the ability to leverage the information, business models compiled and used by the other identity management solutions. This allows organizations to reduce the cost of ownership, close security gaps and leverage the existing infrastructure. And having done so a multiple clients’ sites, this is the approach we recommend. In our next post, we will take a journey through our experiences of advising clients looking to upgrade to R2 from a previous version or migrating from a different solution. Meet the Writers:   Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

    Read the article

  • Oracle Tutor: Top 10 to Implement Sustainable Policies and Procedures

    - by emily.chorba(at)oracle.com
    Overview Your organization (executives, managers, and employees) understands the value of having written business process documents (process maps, procedures, instructions, reference documents, and form abstracts). Policies and procedures should be documented because they help to reduce the range of individual decisions and encourage management by exception: the manager only needs to give special attention to unusual problems, not covered by a specific policy or procedure. As more and more procedures are written to cover recurring situations, managers will begin to make decisions which will be consistent from one functional area to the next.Companies should take a project management approach when implementing an environment for a sustainable documentation program and do the following:1. Identify an Executive Champion2. Put together a winning team3. Assign ownership4. Centralize publishing5. Establish the Document Maintenance Process Up Front6. Document critical activities only7. Document actual practice8. Minimize documentation9. Support continuous improvement10. Keep it simple 1. Identify an Executive ChampionAppoint a top down driver. Select one key individual to be a mentor for the procedure planning team. The individual should be a senior manager, such as your company president, CIO, CFO, the vice-president of quality, manufacturing, or engineering. Written policies and procedures can be important supportive aids when known to express the thinking for the chief executive officer and / or the president and to have his or her full support. 2. Put Together a Winning TeamChoose a strong Project Management Leader and staff the procedure planning team with management members from cross functional groups. Make sure team members have the responsibility - and the authority - to make things happen.The winning team should consist of the Documentation Project Manager, Document Owners (one for each functional area), a Document Controller, and Document Specialists (as needed). The Tutor Implementation Guide has complete job descriptions for these roles. 3. Assign Ownership It is virtually impossible to keep process documentation simple and meaningful if employees who are far removed from the activity itself create it. It is impossible to keep documentation up-to-date when responsibility for the document is not clearly understood.Key to the Tutor methodology, therefore, is the concept of ownership. Each document has a single owner, who is responsible for ensuring that the document is necessary and that it reflects actual practice. The owner must be a person who is knowledgeable about the activity and who has the authority to build consensus among the persons who participate in the activity as well as the authority to define or change the way an activity is performed. The owner must be an advocate of the performers and negotiate, not dictate practices.In the Tutor environment, a document's owner is the only person with the authority to approve an update to that document. 4. Centralize Publishing Although it is tempting (especially in a networked environment and with document management software solutions) to decentralize the control of all documents -- with each owner updating and distributing his own -- Tutor promotes centralized publishing by assigning the Document Administrator (gate keeper) to manage the updates and distribution of the procedures library. 5. Establish a Document Maintenance Process Up Front (and stick to it) Everyone in your organization should know they are invited to suggest changes to procedures and should understand exactly what steps to take to do so. Tutor provides a set of procedures to help your company set up a healthy document control system. There are many document management products available to automate some of the document change and maintenance steps. Depending on the size of your organization, a simple document management system can reduce the effort it takes to track and distribute document changes and updates. Whether your company decides to store the written policies and procedures on a file server or in a database, the essential tasks for maintaining documents are the same, though some tasks are automated. 6. Document Critical Activities Only The best way to keep your documentation simple is to reduce the number of process documents to a bare minimum and to include in those documents only as much detail as is absolutely necessary. The first step to reducing process documentation is to document only those activities that are deemed critical. Not all activities require documentation. In fact, some critical activities cannot and should not be standardized. Others may be sufficiently documented with an instruction or a checklist and may not require a procedure. A document should only be created when it enhances the performance of the employee performing the activity. If it does not help the employee, then there is no reason to maintain the document. Activities that represent little risk (such as project status), activities that cannot be defined in terms of specific tasks (such as product research), and activities that can be performed in a variety of ways (such as advertising) often do not require documentation. Sometimes, an activity will evolve to the point where documentation is necessary. For example, an activity performed by single employee may be straightforward and uncomplicated -- that is, until the activity is performed by multiple employees. Sometimes, it is the interaction between co-workers that necessitates documentation; sometimes, it is the complexity or the diversity of the activity.7. Document Actual Practices The only reason to maintain process documentation is to enhance the performance of the employee performing the activity. And documentation can only enhance performance if it reflects reality -- that is, current best practice. Documentation that reflects an unattainable ideal or outdated practices will end up on the shelf, unused and forgotten.Documenting actual practice means (1) auditing the activity to understand how the work is really performed, (2) identifying best practices with employees who are involved in the activity, (3) building consensus so that everyone agrees on a common method, and (4) recording that consensus.8. Minimize Documentation One way to keep it simple is to document at the highest level possible. That is, include in your documents only as much detail as is absolutely necessary.When writing a document, you should ask yourself, What is the purpose of this document? That is, what problem will it solve?By focusing on this question, you can target the critical information.• What questions are the end users likely to have?• What level of detail is required?• Is any of this information extraneous to the document's purpose? Short, concise documents are user friendly and they are easier to keep up to date. 9. Support Continuous Improvement Employees who perform an activity are often in the best position to identify improvements to the process. In other words, continuous improvement is a natural byproduct of the work itself -- but only if the improvements are communicated to all employees who are involved in the process, and only if there is consensus among those employees.Traditionally, process documentation has been used to dictate performance, to limit employees' actions. In the Tutor environment, process documents are used to communicate improvements identified by employees. How does this work? The Tutor methodology requires a process document to reflect actual practice, so the owner of a document must routinely audit its content -- does the document match what the employees are doing? If it doesn't, the owner has the responsibility to evaluate the process, to build consensus among the employees, to identify "best practices," and to communicate these improvements via a document update. Continuous improvement can also be an outgrowth of corrective action -- but only if the solutions to problems are communicated effectively. The goal should be to solve a problem once and only once, which means not only identifying the solution, but ensuring that the solution becomes part of the process. The Tutor system provides the method through which improvements and solutions are documented and communicated to all affected employees in a cost-effective, timely manner; it ensures that improvements are not lost or confined to a single employee. 10. Keep it Simple Process documents don't have to be complex and unfriendly. In fact, the simpler the format and organization, the more likely the documents will be used. And the simpler the method of maintenance, the more likely the documents will be kept up-to-date. Keep it simply by:• Minimizing skills and training required• Following the established Tutor document format and layout• Avoiding technology just for technology's sake No other rule has as major an impact on the success of your internal documentation as -- keep it simple. Learn More For more information about Tutor, visit Oracle.Com or the Tutor Blog. Post your questions at the Tutor Forum.   Emily Chorba Principle Product Manager Oracle Tutor & BPM 

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

< Previous Page | 686 687 688 689 690 691 692 693 694 695 696 697  | Next Page >