console application - Page 799

Unit testing is… well, flawed.

- by Dewald Galjaard

Hey someone had to say it. I clearly recall my first IT job. I was appointed Systems Co-coordinator for a leading South African retailer at store level. Don’t get me wrong, there is absolutely nothing wrong with an honest day’s labor and in fact I highly recommend it, however I’m obliged to refer to the designation cautiously; in reality all I had to do was monitor in-store prices and two UNIX front line controllers. If anything went wrong – I only had to phone it in… Luckily that wasn’t all I did. My duties extended to some other interesting annual occurrence – stock take. Despite a bit more curious affair, it was still a tedious process that took weeks of preparation and several nights to complete. Then also I remember that no matter how elaborate our planning was, the entire exercise would be rendered useless if we couldn’t get the basics right – that being the act of counting. Sounds simple right? We’ll with a store which could potentially carry over tens of thousands of different items… we’ll let’s just say I believe that’s when I first became a coffee addict. In those days the act of counting stock was a very humble process. Nothing like we have today. A staff member would be assigned a bin or shelve filled with items he or she had to sort then count. Thereafter they had to record their findings on a complementary piece of paper. Every night I would manage several teams. Each team was divided into two groups - counters and auditors. Both groups had the same task, only auditors followed shortly on the heels of the counters, recounting stock levels, making sure the original count correspond to their findings. It was a simple yet hugely responsible orchestration of people and thankfully there was one fundamental and golden rule I could always abide by to ensure things run smoothly – No-one was allowed to audit their own work. Nope, not even on nights when I didn’t have enough staff available. This meant I too at times had to get up there and get counting, or have the audit stand over until the next evening. The reason for this was obvious - late at night and with so much to do we were prone to make some mistakes, then on the recount, without a fresh set of eyes, you were likely to repeat the offence. Now years later this rule or guideline still holds true as we develop software (as far removed as software development from counting stock may be). For some reason it is a fundamental guideline we’re simply ignorant of. We write our code, we write our tests and thus commit the same horrendous offence. Yes, the procedure of writing unit tests as practiced in most development houses today – is flawed. Most if not all of the tests we write today exercise application logic – our logic. They are based on the way we believe an application or method should/may/will behave or function. As we write our tests, our unit tests mirror our best understanding of the inner workings of our application code. Unfortunately these tests will therefore also include (or be unaware of) any imperfections and errors on our part. If your logic is flawed as you write your initial code, chances are, without a fresh set of eyes, you will commit the same error second time around too. Not even experience seems to be a suitable solution. It certainly helps to have deeper insight, but is that really the answer we should be looking for? Is that really failsafe? What about code review? Code review is certainly an answer. You could have one developer coding away and another (or team) making sure the logic is sound. The practice however has its obvious drawbacks. Firstly and mainly it is resource intensive and from what I’ve seen in most development houses, given heavy deadlines, this guideline is seldom adhered to. Hardly ever do we have the resources, money or time readily available. So what other options are out there? A quest to find some solution revealed a project by Microsoft Research called PEX. PEX is a framework which creates several test scenarios for each method or class you write, automatically. Think of it as your own personal auditor. Within a few clicks the framework will auto generate several unit tests for a given class or method and save them to a single project. PEX help to audit your work. It lends a fresh set of eyes to any project you’re working on and best of all; it is cost effective and fast. Check them out at http://research.microsoft.com/en-us/projects/pex/ In upcoming posts we’ll dive deeper into how it works and how it can help you. Certainly there are more similar frameworks out there and I would love to hear from you. Please share your experiences and insights.

Read the article

Oracle WebLogic Server 12c Launch Event - Dec 1, 2011, 10am PT

- by arungupta

Calling all IT managers, architects, and developers, to find out how the new release of Oracle WebLogic Server 12c is: Designed to help you seamlessly move into the public or private cloud with an open, standards-based platform Built to drive higher value for your current infrastructure and significantly reduce development time and cost Optimized to run your solutions for Java Platform, Enterprise Edition (Java EE); Oracle Fusion Middleware; and Oracle Fusion Enhanced with transformational platforms and technologies such as Java EE 6, Oracle’s Active GridLink for RAC, Oracle Traffic Director, and Oracle Virtual Assembly Builder When ? Dec 1, 2011, 10am - 12pm PT Where ? Register online! Here are some other links for you to follow: blogs.oracle.com/weblogicserver @OracleWebLogic youtube.com/OracleWebLogic facebook.com/OracleWebLogic Steve Button's Blog Jeff West's Blog WebLogic Forums WebLogic @ OTN Almost ready to unwrap the ribbons, pop open the cork, at the start line ... or whatever fits your analogy :-) And in case you are wondering ... here is a snapshot of WebLogic 12c administration console snapshot:

Read the article

Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

- by terje

Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled. To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that. However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code. If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks. I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post. When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate. Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check. Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds. Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”. The ruleset checks The following list is the essential and critical memory checks. CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set. ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones. All three rulesets can be found in the zip archive “Inmeta.Memorycheck” downloadable from here. Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN : Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

Read the article

Shallow Copy vs DeepCopy in C#.NET

Hope below example helps to understand the difference. Please drop a comment if any doubts. using System; using System.IO; using System.Runtime.Serialization.Formatters.Binary; namespace ShallowCopyVsDeepCopy { class Program { static void Main(string[] args) { var e1 = new Emp { EmpNo = 10, EmpName = "Smith", Department = new Dep { DeptNo = 100, DeptName = "Finance" } }; var e2 = e1.ShallowClone(); e1.Department.DeptName = "Accounts"; Console.WriteLine(e2.Department.DeptName); var e3 = new Emp { EmpNo = 10, EmpName = "Smith", Department = new Dep { DeptNo = 100, DeptName = "Finance" } }; var e4 = e3.DeepClone(); e3.Department.DeptName = "Accounts"; Console.WriteLine(e4.Department.DeptName); } } [Serializable] class Dep { public int DeptNo { get; set; } public String DeptName { get; set; } } [Serializable] class Emp { public int EmpNo { get; set; } public String EmpName { get; set; } public Dep Department { get; set; } public Emp ShallowClone() { return (Emp)this.MemberwiseClone(); } public Emp DeepClone() { MemoryStream ms = new MemoryStream(); BinaryFormatter bf = new BinaryFormatter(); bf.Serialize(ms, this); ms.Seek(0, SeekOrigin.Begin); object copy = bf.Deserialize(ms); ms.Close(); return copy as Emp; } } } span.fullpost {display:none;}

Read the article

EPM 11.1.2 - In WebLogic Server, Enable Native IO Performance Pack

- by Ahmed Awan

Performance can be improved by enabling native IO in production mode. WebLogic Server benchmarks show major performance improvements when native performance packs are used on machines that host Oracle WebLogic Server instances. Important Note: Always enable native I/O, if available, and check for errors at startup to make sure it is being initialed properly. Tip: The use of NATIVE performance packs are enabled by default in the configuration shipped with your distribution. You can use the Administration Console to verify that performance packs are enabled by clicking on each managed server and click on Tuning tab.

Read the article

What’s Outt Showcases What’s New in Theaters, TV, Music, Books, Games, and More

- by Jason Fitzpatrick

It’s tough to keep on top of all the new media that comes out; What’s Outt gathers current and future releases for everything from in-theater movies to console games. You can check out the current week, up to two weeks into the future, and–if you’re a bit behind the new release wave–you can page your way back through the archives to catch up. In addition to the web interface, What’s Outt has a simple once-a-week mailing list to keep you updated on the newest releases across all the categories they tracks. What’s Outt [via MakeUseOf] How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows?

Read the article

ASP.NET Web API and Simple Value Parameters from POSTed data

- by Rick Strahl

In testing out various features of Web API I've found a few oddities in the way that the serialization is handled. These are probably not super common but they may throw you for a loop. Here's what I found. Simple Parameters from Xml or JSON Content Web API makes it very easy to create action methods that accept parameters that are automatically parsed from XML or JSON request bodies. For example, you can send a JavaScript JSON object to the server and Web API happily deserializes it for you. This works just fine:public string ReturnAlbumInfo(Album album) { return album.AlbumName + " (" + album.YearReleased.ToString() + ")"; } However, if you have methods that accept simple parameter types like strings, dates, number etc., those methods don't receive their parameters from XML or JSON body by default and you may end up with failures. Take the following two very simple methods:public string ReturnString(string message) { return message; } public HttpResponseMessage ReturnDateTime(DateTime time) { return Request.CreateResponse<DateTime>(HttpStatusCode.OK, time); } The first one accepts a string and if called with a JSON string from the client like this:var client = new HttpClient(); var result = client.PostAsJsonAsync<string>(http://rasxps/AspNetWebApi/albums/rpc/ReturnString, "Hello World").Result; which results in a trace like this: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnString HTTP/1.1Content-Type: application/json; charset=utf-8Host: rasxpsContent-Length: 13Expect: 100-continueConnection: Keep-Alive "Hello World" produces… wait for it: null. Sending a date in the same fashion:var client = new HttpClient(); var result = client.PostAsJsonAsync<DateTime>(http://rasxps/AspNetWebApi/albums/rpc/ReturnDateTime, new DateTime(2012, 1, 1)).Result; results in this trace: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnDateTime HTTP/1.1Content-Type: application/json; charset=utf-8Host: rasxpsContent-Length: 30Expect: 100-continueConnection: Keep-Alive "\/Date(1325412000000-1000)\/" (yes still the ugly MS AJAX date, yuk! This will supposedly change by RTM with Json.net used for client serialization) produces an error response: The parameters dictionary contains a null entry for parameter 'time' of non-nullable type 'System.DateTime' for method 'System.Net.Http.HttpResponseMessage ReturnDateTime(System.DateTime)' in 'AspNetWebApi.Controllers.AlbumApiController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter. Basically any simple parameters are not parsed properly resulting in null being sent to the method. For the string the call doesn't fail, but for the non-nullable date it produces an error because the method can't handle a null value. This behavior is a bit unexpected to say the least, but there's a simple solution to make this work using an explicit [FromBody] attribute:public string ReturnString([FromBody] string message) andpublic HttpResponseMessage ReturnDateTime([FromBody] DateTime time) which explicitly instructs Web API to read the value from the body. UrlEncoded Form Variable Parsing Another similar issue I ran into is with POST Form Variable binding. Web API can retrieve parameters from the QueryString and Route Values but it doesn't explicitly map parameters from POST values either. Taking our same ReturnString function from earlier and posting a message POST variable like this:var formVars = new Dictionary<string,string>(); formVars.Add("message", "Some Value"); var content = new FormUrlEncodedContent(formVars); var client = new HttpClient(); var result = client.PostAsync(http://rasxps/AspNetWebApi/albums/rpc/ReturnString, content).Result; which produces this trace: POST http://rasxps/AspNetWebApi/albums/rpc/ReturnString HTTP/1.1Content-Type: application/x-www-form-urlencodedHost: rasxpsContent-Length: 18Expect: 100-continue message=Some+Value When calling ReturnString:public string ReturnString(string message) { return message; } unfortunately it does not map the message value to the message parameter. This sort of mapping unfortunately is not available in Web API. Web API does support binding to form variables but only as part of model binding, which binds object properties to the POST variables. Sending the same message as in the previous example you can use the following code to pick up POST variable data:public string ReturnMessageModel(MessageModel model) { return model.Message; } public class MessageModel { public string Message { get; set; }} Note that the model is bound and the message form variable is mapped to the Message property as would other variables to properties if there were more. This works but it's not very dynamic. There's no real easy way to retrieve form variables (or query string values for that matter) in Web API's Request object as far as I can discern. Well only if you consider this easy:public string ReturnString() { var formData = Request.Content.ReadAsAsync<FormDataCollection>().Result; return formData.Get("message"); } Oddly FormDataCollection does not allow for indexers to work so you have to use the .Get() method which is rather odd. If you're running under IIS/Cassini you can always resort to the old and trusty HttpContext access for request data:public string ReturnString() { return HttpContext.Current.Request.Form["message"]; } which works fine and is easier. It's kind of a bummer that HttpRequestMessage doesn't expose some sort of raw Request object that has access to dynamic data - given that it's meant to serve as a generic REST/HTTP API that seems like a crucial missing piece. I don't see any way to read query string values either. To me personally HttpContext works, since I don't see myself using self-hosted code much.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

GDC 2012: Best practices in developing a web game

GDC 2012: Best practices in developing a web game (Pre-recorded GDC content) There's a new wave of console/pc/mobile game developers moving to the web looking to take advantage of the massive user base, along side of the powerful social graphs available there. The web as a platform is a very different technology stack than consoles / mobile, and as such, requires different development processes. This talk is targeted towards game developers who are looking to understand more about the development processes for web development including where to host your assets, proper techniques in caching to the persistant file store; dealing with sessions, storing user state, user login, game state storage, social graph integration, localization, audio, rendering, hardware detection and testing / distribution. If you're interested in developing a web game, you need to attend this talk! Speaker: Colt McAnlis From: GoogleDevelopers Views: 5149 131 ratings Time: 01:03:52 More in Science & Technology

Read the article

What to do if you're burnt out?

- by rsteckly

Hi, I'm starting to get really frustrated with ASP.NET. It seems as if much of my time is spent learning abstractions over problems, then having to kick into overdrive when those abstractions (surprise!) have unexpected behavior. It seems as if I spend so much time just fixing those issues because they usually are UI related and therefore require integration testing that I spend very little time programming any kind of meaningful logic. I don't know if it is ASP or if it is programming. I just feel as if I'm getting paid, doing the work but really wasting time. On the other hand, I have fantasies about console programs and actually using algorithms. What is wrong with me? Why can't I force myself to churn through this ASP stuff more?

Read the article

Pella Increases Online Appointment Scheduling and Rapidly Personalizes and Updates Marketing Initiatives

- by Michael Snow

Originally posted on Oracle Customers page.Oracle Customer: Pella CorporationLocation: Pella, IowaIndustry: Industrial Manufacturing Employees: 7,100 Pella Corporation is an innovative leader in creating a better view for homes and businesses by designing, testing, manufacturing, and installing quality windows and doors for new construction, remodeling, and replacement applications. A family-owned company, Pella has an 88-year history of innovation and, today, is the second-largest manufacturer in the country of windows and doors, including patio, entry, and storm doors. The company has 10 manufacturing facilities in United States and window and door showrooms across the United States and Canada. In-home consultations are an important part of Pella’s sales process. Several years ago, the company launched an online appointment scheduling tool to improve customer convenience. While the functionality worked well, the company wanted to increase online conversion rates and decrease the number of incomplete, online appointment schedules. It also wanted to give its business analysts and other line-of-business personnel the ability to update the scheduling tool and interface quickly, without needing IT team intervention and recoding, to better capitalize on opportunities and personalize the interface for specific markets. Pella also looked to reduce IT complexity by selecting a system that integrated easily with its Oracle E-Business Suite Release 12.1 enterprise applications.Pella, which has a large Oracle footprint, selected Oracle WebCenter Sites as the foundation for its new, real-time appointment scheduling application. It used the solution to re-engineer the scheduling process and the information required to set up an appointment. Just a few months after launch, it is seeing improvement in the number of appointments booked online and experiencing fewer abandoned appointments during the scheduling process. As important, Pella can now quickly and easily make changes to images, video, and content displayed on the scheduling tool interface, delivering greater business agility. Previously, such changes required a developer and weeks of coding and testing. Today, a member of Pella’s business analyst team can complete the changes in hours. This capability enables Pella to personalize the Web experience for customers. For example, it can display different products or images for clients in different regions.The solution is also highly scalable. Pella is using Oracle WebCenter Sites for appointment scheduling now and plans to migrate Pella.com, its configurator tool, and dealer microsites onto the platform. Further, Pella plans to leverage the solution to optimize mobile devices. “Moving ahead, we expect to extensively leverage Oracle WebCenter Sites to gain greater flexibility in updating the Web experience, thanks to the ability to make updates quickly without developer resources. Segmentation and targeting capabilities will allow us to create a more personalized experience across both traditional and mobile platforms,” said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. A word from Pella Corporation "Oracle WebCenter Sites?from the start?delivered important benefits. We’ve redesigned the online scheduling process and are seeing more potential customers completing consultation bookings online. More important, the solution opens a world of other possibilities as we plan to migrate Pella.com and our dealer microsites to the platform, and leverage it to optimize the Web experience for our mobile devices.” – Teri Lancaster, IT Manager, Customer Experience Applications, Pella Corporation Oracle Product and Services Oracle WebCenter Sites Why Oracle Pella has a long-standing relationship with Oracle. “We look to Oracle first for a solution. Our Oracle account team came to us with several solutions, and Oracle WebCenter Sites delivered the scalability, ease-of-use, flexibility, and scalability that we required for the appointment scheduling initiative and other Web projects on the horizon, including migrating Pella.com and optimizing our site for mobile platforms,”said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. Implementation Process The Pella implementation team, working with Oracle partner Element Solutions, LLC, integrated the appointment setting application with Pella.com as well as the company’s Oracle E-Business Suite customer relationship management applications. Using Oracle WebCenter Site’s development tools and subversion capabilities to develop the application, the Element Solutions and Pella teams could work remotely and collaboratively, accelerating deployment. Pella went live with the new scheduling tool in just six months. Partner Oracle PartnerElement Solutions, LLC Element Solutions was instrumental at every major stage of the project, including design creation and approval, development, training, and rollout. “Element Solutions was a vital partner for our Oracle WebCenter Sites initiative. The team provided guidance, and more important, critical knowledge transfer at every stage?which equipped us to get the most out of this powerful and versatile solution. We were definitely collaboration partners,” Lancaster said. Resources Pella Corporation Upgrades Enterprise Applications to Continue to Improve Manufacturing Efficiency Thousands of Customers Successfully and Smoothly Upgrade to Oracle E-Business Suite 12.1 for New Functionality, Lower Operating Costs and Improved Shared Operations Managing the Virtual World

Read the article

Can't Boot, video drivers or x-server problem?

- by ZacharyH

I was uninstalling some programs that I installed to try and get my iPod touch working with Ubuntu (I gave up on that) when ubuntu just crashed. Now after I choose ubuntu in GRUB, it gives me a screen that says "Ubuntu is running in low-graphics mode: your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself" It was working just fine before I started to uninstall those programs. I think that I might have uninstalled something necessary to the system. If I click OK on the screen, it gives me options to reconfigure, troubleshoot, exit to console, or restart X. But no matter what I choose I still can't boot into ubuntu - I get stuck looking at the splash screen which stalls forever. I was receiving support from one of my mate's and he was doing something with the LiveCD, and now the message doesn't pop up any more, I just get stuck at a never ending splash screen. Any help would be appreciated, thanks!

Read the article

Google+ Platform Office Hours for March 28, 2012: Hangouts API v1.0

Google+ Platform Office Hours for March 28, 2012: Hangouts API v1.0 Here's another video from a previous session of our office hours. Watch this video to learn about the Hangouts Apps launch from +Wolff and +Jonathan. Discuss this video on Google+: goo.gl 3:31 - Publishing your hangout app 4:28 - Hangout applications vs extensions 8:00 - The application switcher 9:58 - On the terms of service, privacy policy and support contact fields 12:07 - OAuth client and hangout apps featuring the API console 15:50 - Registering as a Chrome web store developer 17:44 - Linking to your hangout 20:25 - The hangout button 24:33 - How data URIs can make things easier in your apps Q&A 29:00 - What's the status of the REST APIs? 30:41 - How do I set the hangout topic or title? 31:19 - How do those of us in other time zones know when your office hours will be held? 34:04 - Can I use the hangout button with other peoples' hangout apps? From: GoogleDevelopers Views: 2788 28 ratings Time: 35:18 More in Science & Technology

Read the article

User Experience Fundamentals

- by ultan o'broin

Understanding what user experience means in the modern work environment is central to building great-looking usable applications on the desktop or mobile devices. What better place to start a series of blog posts on such Applications User Experience team enablement for customers and partners than by sharing what the term really means, writes team member Karen Scipi. Applications UX have gained valuable insights into developing a user experience that reflects the experience of today’s worker. We have observed real workers performing real tasks in real work environments, and we have developed a set of new standards of application design that have been scientifically proven to be beneficial to enable today’s workers. We share such expertise to enable our customers and partners to benefit from our insights and to further their return on investment when building Oracle applications. So, What is User Experience? ?The user interface (UI) is about the on-screen user context provided by the layout of widgets (such as icons, fields, and buttons and more) and the visual impact of colors, typographic choices, and so on. The UI comprises the “look and feel” of the application that users interact with, and reflects, in essence, the most immediate aspects of usability we can now all relate to. User experience, on the other hand, is about understanding the whole context of the world of work, how workers go about completing tasks, crossing all sorts of boundaries along the way. It is a study of how business processes and workers goals coincide, how users work with technology or other tools to get their jobs done, their interactions with other users, and their response to the technical, physical, and cultural environment around them. User experience is all about how users work—their work environments, office layouts, desk tools, types of devices, their working day, and more. Even their job aids, such as sticky notes, offer insight for UX innovation. User experience matters because businesses needs to be efficient, work must be productive, and users now demand to be satisfied by the applications they work with. In simple terms, tasks finished quickly and accurately for a business evokes organization and worker satisfaction, which in turn makes workers feel good and more than willing to use the application again tomorrow. Design Principles for the Enterprise Worker The consumerization of information technology has raised the bar for enterprise applications. Applications must be consistent, simple, intuitive, but above all contextual, reflecting how and when workers work, in the office or on the go. For example, the Google search experience with its type-ahead keyword-prompting feature is how workers expect to be able to discover enterprise information, too. Type-ahead in PeopleSoft 9.1 To build software that enables workers to be productive, our design principles meet modern work requirements about consistency, with well-organized, context-driven information, geared for a working world of discovery and collaboration. Our applications must also behave in a simple, web-like way just like Amazon, Google, and Apple products that workers use at home or on the go. Our user experience must also reflect workers’ needs for flexibility and well-loved enterprise practices such as using popular desktop tools like Microsoft Excel or Outlook as required. Building User Experience Productively The building blocks of Oracle Fusion Applications are the user experience design patterns. Based on the Oracle Fusion Middleware technology used to build Oracle Fusion Applications, the patterns are reusable solutions to common usability challenges that ADF developers typically face as they build applications, extensions, and integrations. Developers use the patterns as part of their Oracle toolkits to realize great usability consistently and in a productive way. Our design pattern creation process is informed by user experience research and science, an understanding of our technology’s capabilities, the demands for simplification and intuitiveness from users, and the best of Oracle’s acquisitions strategy (an injection of smart people and smart innovation). The patterns are supported by usage guidelines and are tested in our labs and assembled into a library of proven resources we used to build own Oracle Fusion Applications and other Oracle applications user experiences. The design patterns library is now available to the ADF community and to our partners and customers, for free. Developers with ADF skills and other technology skills can now offer more than just coding and functionality and still use the best in enterprise methodologies to ensure that a great user experience is easily applied, scaled, and maintained, whether it be for SaaS or on-premise deployments for Oracle Fusion Applications, for applications coexistence, or for partner integrations scenarios. Oracle partners and customers already using our design patterns to build solutions and win business in smart and productive ways are now sharing their experiences and insights on pattern use to benefit your entire business. Applications UX is going global with the message and the means. Our hands-on user experience enablement through ADF is expanding. So, stay tuned to Misha Vaughan's Voice of User Experience (VOX) blog and follow along on Twitter at @usableapps for news of outreach events and other learning opportunities. Interested in Learning More? Oracle Fusion Applications User Experience Patterns and Guidelines Library Shout-outs for Oracle UX Design Patterns Oracle Fusion Applications User Experience Design Patterns: Productivity Realized

Read the article

Html.RenderAction Failed when Validation Failed

- by Shaun

RenderAction method had been introduced when ASP.NET MVC 1.0 released in its MvcFuture assembly and then final announced along with the ASP.NET MVC 2.0. Similar as RenderPartial, the RenderAction can display some HTML markups which defined in a partial view in any parent views. But the RenderAction gives us the ability to populate the data from an action which may different from the action which populating the main view. For example, in Home/Index.aspx we can invoke the Html.RenderPartial(“MyPartialView”) but the data of MyPartialView must be populated by the Index action of the Home controller. If we need the MyPartialView to be shown in Product/Create.aspx we have to copy (or invoke) the relevant code from the Index action in Home controller to the Create action in the Product controller which is painful. But if we are using Html.RenderAction we can tell the ASP.NET MVC from which action/controller the data should be populated. in that way in the Home/Index.aspx and Product/Create.aspx views we just need to call Html.RenderAction(“CreateMyPartialView”, “MyPartialView”) so it will invoke the CreateMyPartialView action in MyPartialView controller regardless from which main view. But in my current project we found a bug when I implement a RenderAction method in the master page to show something that need to connect to the backend data center when the validation logic was failed on some pages. I created a sample application below. Demo application I created an ASP.NET MVC 2 application and here I need to display the current date and time on the master page. I created an action in the Home controller named TimeSlot and stored the current date into ViewDate. This method was marked as HttpGet as it just retrieves some data instead of changing anything. 1: [HttpGet] 2: public ActionResult TimeSlot() 3: { 4: ViewData["timeslot"] = DateTime.Now; 5: return View("TimeSlot"); 6: } Next, I created a partial view under the Shared folder to display the date and time string. 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<dynamic>" %> 2: 3: <span>Now: <% 1: : ViewData["timeslot"].ToString() %></span> Then at the master page I used Html.RenderAction to display it in front of the logon link. 1: <div id="logindisplay"> 2: <% 1: Html.RenderAction("TimeSlot", "Home"); %> 3: 4: <% 1: Html.RenderPartial("LogOnUserControl"); %> 5: </div> It’s fairly simple and works well when I navigated to any pages. But when I moved to the logon page and click the LogOn button without input anything in username and password the validation failed and my website crashed with the beautiful yellow page. (I really like its color style and fonts…) How ASP.NET MVC executes Html.RenderAction In this example all other pages were rendered successful which means the ASP.NET MVC found the TimeSolt action under the Home controller except this situation. The only different is that when I clicked the LogOn button the browser send an HttpPost request to the server. Is that the reason of this bug? I created another action in Home controller with the same action name but for HttpPost. 1: [HttpPost] 2: [ActionName("TimeSlot")] 3: public ActionResult TimeSlot(object dummy) 4: { 5: return TimeSlot(); 6: } Or, I can use the AcceptVerbsAttribute on the TimeSlot action to let it allow both HttpGet and HttpPost. 1: [AcceptVerbs("GET", "POST")] 2: public ActionResult TimeSlot() 3: { 4: ViewData["timeslot"] = DateTime.Now; 5: return View("TimeSlot"); 6: } And then repeat what I did before and this time it worked well. Why we need the action for HttpPost here as it’s just data retrieving? That is because of how ASP.NET MVC executes the RenderAction method. In the source code of ASP.NET MVC we can see when proforming the RenderAction ASP.NET MVC creates a RequestContext instance from the current RequestContext and created a ChildActionMvcHandler instance which inherits from MvcHandler class. Then the ASP.NET MVC processes the handler through the HttpContext.Server.Execute method. That means it performs the action as a stand-alone request asynchronously and flush the result into the TextWriter which is being used to render the current page. Since when I clicked the LogOn the request was in HttpPost so when ASP.NET MVC processed the ChildActionMvcHandler it would find the action which allow the current request method, which is HttpPost. Then our TimeSlot method in HttpGet would not be matched. Summary In this post I introduced a bug in my currently developing project regards the new Html.RenderAction method provided within ASP.NET MVC 2 when processing a HttpPost request. In ASP.NET MVC world the underlying Http information became more important than in ASP.NET WebForm world. We need to pay more attention on which kind of request it currently created and how ASP.NET MVC processes. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

SQL SERVER – The Story of a Lesser Known Startup Parameter in SQL Server – Guest Post by Balmukund Lakhani

- by Pinal Dave

This is a fantastic blog post from my dear friend Balmukund ( blog | twitter | facebook ). He had presented a fantastic session in our last UG and there were lots of requests from attendees that he blogs about it. Well, here is the blog post about the same very popular UG session. Let us read the entire blog post in the voice of the Balmukund himself. During my last session in SQL Bangalore User Group (Facebook) meeting, I was lucky enough to deliver a session on SQL Server Startup issue. The name of the session was “SQL Engine Starting Trouble – How to start?” From the feedback, I realized that one of the “not well known” startup parameter is “-m”. Okay, you might say “I know that this is used to start the SQL in single user mode”. But what you might not know is that you can pass a string with -m which has special meaning and use. I have used this parameter in my blog here but looks like not many of you have seen that. It happens most of the time when we want to start SQL Server in single user mode, someone else makes connection before you can. The only choice you have is to repeat same process again till you succeed. Some smart DBAs may disable the remote network protocols (TCP/IP and Named Pipes) of SQL Instance and allow only local connections to SQL. Once the activity is complete, our dear smart DBA has to remember to re-enable network protocols. Sometimes, it may be a local service or application getting connection to SQL before we can. There is a better way to deal with it. Yes, you have guessed it correctly: -m parameter which a string. Since I work with SQL Product Support team, I may know little more undocumented commands and parameters, but this is not an undocumented stuff. It’s already documented in books online. So in this blog, I am going to show a demo of its usage. As documentation shows, “Do not use this option as a security feature.” So please read this blog as knowledge enhancer and troubleshooting issues not security feature. In my laptop, I have a default instance of SQL Server 2012 and here is what we would in the configuration manager. Now, I would go ahead and stop SQL Service by selecting SQL Server (MSSQLServer) > Right Click > Stop. There are multiple ways to start SQL with startup parameter. 1) Use Net Start Command from command prompt Net Start MSSQLServer /mSQLCMD The above command is the simplest way to add startup parameter to SQL. This parameter would be cleared once we stop and start SQL. 2) Add Startup Parameter via configuration manager. Step is already listed here. We need to add -mSQLCMD If we compare 1 and 2, it’s clear that unless we modify startup parameter and remove -m, it would be in effect. 3) Start SQL Service via command line SQLServr.exe –mSQLCMD –s<InstanceName> Wait, what does SQLCMD mean with /m? It’s the instruction to SQL that start SQL Server in Single User Mode and allow only the application which is SQLCMD. Any other application would fail with Login Failed for User Error message. It would be important to note that string is case sensitive. This value should be picked up from application_name column from sys.dm_exec_sessions. I have made a connection using SQLCMD and as we can see it comes as upper case “SQLCMD”. If we want only management studio query windows to connect then we need to give -m” Microsoft SQL Server Management Studio – Query” as startup parameter. In below example, I have given it as SQLCMd (lower case d at the end) and we would notice that we would not be able to connect to SQL Instance. Above proves that parameter works as expected and it’s case sensitive. Error Log would show below information. How to get error log location? I have already blogged about it. Hope you have learned something new. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

Read the article

International Radio Operators Alphabet in F# & Silverlight – Part 1

- by MarkPearl

So I have been delving into F# more and more and thought the best way to learn the language is to write something useful. I have been meaning to get some more Silverlight knowledge (up to now I have mainly been doing WPF) so I came up with a really simple project that I can actually use at work. Simply put – I often get support calls from clients wanting new activation codes. One of our main app’s was written in VB6 and had its own “security” where it would require about a 45 character sequence for it to be activated. The catch being that each time you reopen the program it would require a different character sequence, which meant that when we activate clients systems we have to do it live! This involves us either referring them to a website, or reading the characters to them over the phone and since nobody in the office knows the IROA off by heart we would come up with some interesting words to represent characters… 9 times out of 10 the client would type in the wrong character and we would have to start all over again… with this app I am hoping to reduce the errors of reading characters over the phone by treating it like a ham radio. My “Silverlight” application will allow for the user to input a series of characters and the system will then generate the equivalent IROA words… very basic stuff e.g. Character Input – abc Words Generated – Alpha Bravo Charlie After listening to Anders Hejlsberg on Dot Net Rocks Show 541 he mentioned that he felt many applications could make use of F# but in an almost silo basis – meaning that you would write modules that leant themselves to Functional Programming in F# and then incorporate it into a solution where the front end may be in C# or where you would have some other sort of glue. I buy into this kind of approach, so in this project I will use F# to do my very intensive “Business Logic” and will use Silverlight/C# to do the front end. F# Business Layer I am no expert at this, so I am sure to get some feedback on way I could improve my algorithm. My approach was really simple. I would need a function that would convert a single character to a string – i.e. ‘A’ –> “Alpha” and then I would need a function that would take a string of characters, convert them into a sequence of characters, and then apply my converter to return a sequence of words… make sense? Lets start with the CharToString function let CharToString (element:char) = match element.ToString().ToLower() with | "1" -> "1" | "5" -> "5" | "9" -> "9" | "2" -> "2" | "6" -> "6" | "0" -> "0" | "3" -> "3" | "7" -> "7" | "4" -> "4" | "8" -> "8" | "a" -> "Alpha" | "b" -> "Bravo" | "c" -> "Charlie" | "d" -> "Delta" | "e" -> "Echo" | "f" -> "Foxtrot" | "g" -> "Golf" | "h" -> "Hotel" | "i" -> "India" | "j" -> "Juliet" | "k" -> "Kilo" | "l" -> "Lima" | "m" -> "Mike" | "n" -> "November" | "o" -> "Oscar" | "p" -> "Papa" | "q" -> "Quebec" | "r" -> "Romeo" | "s" -> "Sierra" | "t" -> "Tango" | "u" -> "Uniform" | "v" -> "Victor" | "w" -> "Whiskey" | "x" -> "XRay" | "y" -> "Yankee" | "z" -> "Zulu" | element -> "Unknown" Quite simple, an element is passed in, this element is them converted to a lowercase single character string and then matched up with the equivalent word. If by some chance a character is not recognized, “Unknown” will be returned… I know need a function that can take a string and can parse each character of the string and generate a new sequence with the converted words… let ConvertCharsToStrings (s:string) = s |> Seq.toArray |> Seq.map(fun elem -> CharToString(elem)) Here… the Seq.toArray converts the string to a sequence of characters. I then searched for some way to parse through every element in the sequence. Originally I tried Seq.iter, but I think my understanding of what iter does was incorrect. Eventually I found Seq.map, which applies a function to every element in a sequence and then creates a new collection with the adjusted processed element. It turned out to be exactly what I needed… To test that everything worked I created one more function that parsed through every element in a sequence and printed it. AT this point I realized the the Seq.iter would be ideal for this… So my testing code is below… let PrintStrings items = items |> Seq.iter(fun x -> Console.Write(x.ToString() + " ")) let newSeq = ConvertCharsToStrings("acdefg123") PrintStrings newSeq Console.ReadLine() Pretty basic stuff I guess… I hope my approach was right? In Part 2 I will look into doing a simple Silverlight Frontend, referencing the projects together and deploying….

Read the article

Access Control Service: Passive/Active Transition Sample

- by Your DisplayName here!

Here you can find my updated ACS2 sample. In addition to the existing front ends (web [WS-Federation], console [SOAP & REST], Silverlight [REST]) and error handling, it now also includes a WPF client that shows the passive/active transition with a SOAP service as illustrated here. All the ACS interaction is encapsulated in a WPF user control that: retrieves the JSON feed displays a list of supported identity providers triggers the sign in via a browser control retrieves the token response packages the token as a GenericXmlSecurityToken (to be used directly with the WIF ChannelFactory extensions methods) All you need to supply is the ACS namespace and the realm. Have fun!

Read the article

Slow boot on Ubuntu 12.04

- by Hailwood

My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

Read the article

Can't login, kde loads, then back to kdm

- by Daniel

Hi @all (K)Ubuntu users, I installed Kubuntu 10.10 after it's realesing. (ordinary I use Ubuntu, but this time I want to try Kubuntu, too) Now I can't login in Kubuntu: When(/if) I login with mine username and password, KDE loads(I mean this splashscreen), but if it's ready nearly, the screen becomes dark and I'm back in the login-manager. I tried many things: With a new user or with installing gdm or install it new (two times!) Thank you for helping PS: Ubuntu works normal Sorry for my bad english ;-) EDIT: The text-console-mode(or however it's named in english) isn't working anytimes, seemes like a graphics bug or something similiar. And there aren't very many (hidden) ".folders", just .kde .config .dbus .fontconfig and some ".files".

Read the article

Cloud Computing Architecture Patterns: Don’t Focus on the Client

- by BuckWoody

Normally I try to put topics in the positive in other words "Do this" not "Don't do that". Sometimes its clearer to focus on what *not* to do. Popular development processes often start with screen mockups, or user input descriptions. In a scale-out pattern like Cloud Computing on Windows Azure, that's the wrong place to start. Start with the Data Instead, I recommend that you start with the data that a process requires. That data might be temporary or persisted, but starting with the data and its requirements helps to define not only the storage engine you need but also drives everything from security to the integrity of the application. For instance, assume the requirements show that the user must enter their phone number, and that this datum is used in a contact management system further down the application chain. For that datum, you can determine what data type you need (U.S. only or International?) the security requirements, whether it needs ACID compliance, how it will be searched, indexed and so on. From one small data point you can extrapolate out your options for storing and processing the data. Here's the interesting part, which begins to break the patterns that we've used for decades: all of the data doesn't have the same requirements. The phone number might be best suited for a list, or an element, or a string, with either BASE or ACID requirements, based on how it is used. That means we don't have to dump everything into XML, an RDBMS, a NoSQL engine, or a flat file exclusively. In fact, one record might use all of those depending on the use-case requirements. Next Is Data Management With the data defined, we can move on to how to store the data. Again, the requirements now dictate whether we need a full relational calculus or set-based operations, or we can choose another method based on the requirements for the data. And breaking another pattern its OK to store in more than once, in more than one location. We do this all the time for reporting systems and Business Intelligence systems, so this is a pattern we need to think about even for OLTP data. Move to Data Transport How does the data get around? We can use a connection-based method, sending the data along a transport to the storage engine, but in some cases we may want to use a cache, a queue, the Service Bus, or Complex Event Processing. Finally, Data Processing Most RDBMS engines, NoSQL, and certainly Big Data engines not only store data, but can process and manipulate it as well. Its doubtful that you'll calculate that phone number right? Well, if you're the phone company, you most certainly will. And so we see that even once we've chosen the data type, storage and engine, the same element can have different computing requirements based on how it is used. Sure, We Need A Front-End At Some Point Not all data is entered by human hands in fact most data isn't. We don't really need a Graphical User Interface (GUI) we need some way for a GUI to get data into and out of the systems listed earlier. But when we do need to allow users to enter or examine data, that should be left to the GUI that best fits the device the user has. Ever tried to use an application designed for a web browser on a phone? Or one designed for a tablet on a phone? Its usually quite painful. The siren song of "We'll just write one interface for all devices" is strong, and has beguiled many an unsuspecting architect. But they just don't work out. Instead, focus on the data, its transport and processing. Create API calls or a message system that allows for resilient transport to the device or interface, and let it do what it does best. References Microsoft Architecture Journal: http://msdn.microsoft.com/en-us/architecture/bb410935.aspx Patterns and Practices: http://msdn.microsoft.com/en-us/library/ff921345.aspx Windows Azure iOS, Android, Windows 8 Mobile Devices SDK: http://www.windowsazure.com/en-us/develop/mobile/tutorials/get-started-ios/ Windows Azure Facebook SDK: http://ntotten.com/2013/03/14/using-windows-azure-mobile-services-with-the-facebook-sdk-for-windows-phone/

Read the article

Who broke the build?

- by Martin Hinshelwood

I recently sent round a list of broken builds at SSW and asked for them to be fixed or deleted if they are not being used. My colleague Peter came back with a couple of questions which I love as it tells me that at least one person reads my email I think first we need to answer a couple of other questions related to builds in general. Why do we want the build to pass? Any developer can pick up a project and build it Standards can be enforced Constant quality is maintained Problems in code are identified early What could a failed build signify? Developers have not built and tested their code properly before checking in. Something added depends on a local resource that is not under version control or does not exist on the target computer. Developers are not writing tests to cover common problems. There are not enough tests to cover problems. Now we know why, lets answer Peters questions: Where is this list? (can we see it somehow) You can normally only see the builds listed for each project. But, you have a little application called “Build Notifications” on your computer. It is installed when you install Visual Studio 2010. Figure: Staring the build notification application on Windows 7. Once you have it open (it may disappear into your system tray) you should click “Options” and select all the projects you are involved in. This application only lists projects that have builds, so don’t worry if it is not listed. This just means you are about to setup a build, right? I just selected ALL projects that have builds. Figure: All builds are listed here In addition to seeing the list you will also get toast notification of build failure’s. How can we get more info on what broke the build? (who is interesting too, to point the finger but more important is what) The only thing worse than breaking the build, is continuing to develop on a broken build! Figure: I have highlighted the users who either are bad for braking the build, or very bad for not fixing it. To find out what is wrong with a build you need to open the build definition. You can open a web version by double clicking the build in the image above, or you can open it from “Team Explorer”. Just connect to your project and open out the “Builds” tree. Then Open the build by double clicking on it. Figure: Opening a build is easy, but double click it and then open a build run from the list. Figure: Good example, the build and tests have passed Figure: Bad example, there are 133 errors preventing POK from being built on the build server. For identifying failures see: Solution: Getting Silverlight to build on Team Build 2010 RC Solution: Testing Web Services with MSTest on Team Build Finding the problem on a partially succeeded build So, Peter asked about blame, let’s have a look and see: Figure: The build has been broken for so long I have no idea when it was broken, but everyone on this list is to blame (I am there too) The rest of the history is lost in the sands of time, there is no way to tell when the build was originally broken, or by whom, or even if it ever worked in the first place. Build should be protected by the team that uses them and the only way to do that is to have them own them. It is fine for me to go in and setup a build, but the ownership for a build should always reside with the person who broke it last. Conclusion This is an example of a pointless build. Lets be honest, if you have a system like TFS in place and builds are constantly left broken, or not added to projects then your developers don’t yet understand the value. I have found that adding a Gated Check-in helps instil that understanding of value. If you prevent them from checking in without passing that basic quality gate of “your code builds on another computer” then it makes them look more closely at why they can’t check-in. I have had builds fail because one developer had a “d” drive, but the build server did not. That is what they are there to catch. If you want to know what builds to create and why I wrote a post on “Do you know the minimum builds to create on any branch?” Technorati Tags: TFS2010,Gated Check-in,Builds,Build Failure,Broken Build

Read the article

ObjectStorageHelper now available via nuget

- by jamiet

One of my numerous little side projects has recently been ObjectStorageHelper, a library that makes it easy to read/write files in WinRT (aka Windows 8) applications. This is a short post to let you know that ObjectStorageHelper is now available in the nuget gallery and hence can easily be added to your WinRT applications by running the following command in the nuget Package Manager Console: Massive thanks to Scott Lovegrove (@scottisafool) for helping me with this making this happen. To read more about ObjectStorageHelper and what it can do for you please visit Generic Object Storage Helper for WinRT on Codeplex. I know of four apps in the Windows Store that are currently making use of ObjectStorageHelper, they are: myScoreboard pro BO2 Create-a-Class MW3 Create-a-Class Ctrl-Alt-Del The following code shows how easy it is to store files using ObjectStorageHelper: and subsequently retrieve them: @Jamiet

Read the article

ObjectStorageHelper now available via nuget

- by jamiet

One of my numerous little side projects has recently been ObjectStorageHelper, a library that makes it easy to read/write files in WinRT (aka Windows 8) applications. This is a short post to let you know that ObjectStorageHelper is now available in the nuget gallery and hence can easily be added to your WinRT applications by running the following command in the nuget Package Manager Console: Massive thanks to Scott Lovegrove (@scottisafool) for helping me with this making this happen. To read more about ObjectStorageHelper and what it can do for you please visit Generic Object Storage Helper for WinRT on Codeplex. I know of four apps in the Windows Store that are currently making use of ObjectStorageHelper, they are: myScoreboard pro BO2 Create-a-Class MW3 Create-a-Class Ctrl-Alt-Del The following code shows how easy it is to store files using ObjectStorageHelper: and subsequently retrieve them: @Jamiet

Read the article

Server Controls in ASP.NET MVC without ViewState

- by imran_ku07

Introduction : ASP.NET Web Forms provides a development environment just like GUI or windows application and try to hide statelessness nature of HTTP protocol. For accomplishing this target, Web Forms uses ViewState (a hidden field) to remove the gap between HTTP statelessness and GUI applications. But the problem with this technique is that ViewState size which grows quickly and also go back and forth with every request, as a result it will degrade application performance. In this article i will try to use existing ASP.NET server controls without ViewState. Description : When you add a server control which needs viewstate, in the presentation view in ASP.NET MVC application without a form tag, for example, <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> It will shows the following exception, Control 'TextBox1' of type 'TextBox' must be placed inside a form tag with runat=server When you place this textbox inside a form tag with runat=server, this will add the following ViewState even when you disable ViewState by using EnableViewState="false" <input type="hidden" value="/wEPDwUJMjgzMDgzOTgzZGQ6u9CwikhHEW39ObrHyLTPFSboPA==" id="__VIEWSTATE" name="__VIEWSTATE"/> The solution to this problem is to use the RenderControl method of server control which is simply renders HTML without any ViewState hidden field. <% TextBox txt = new TextBox(); txt.Text = "abc"; StringBuilder sb = new StringBuilder(); System.IO.StringWriter textwriter = new System.IO.StringWriter(sb); HtmlTextWriter htmlwriter = new HtmlTextWriter(textwriter); txt.RenderControl(htmlwriter); %> <%= sb.ToString() %> This will render <input type="text" > without any View State. This technique become very useful when you are using rich server controls like GridView. For example, let's say you have List of Recalls in Model.Recalls, then you will show your tabular data as, <% GridView gv = new GridView(); gv.AutoGenerateColumns = true; gv.DataSource = Model.Recalls; gv.DataBind(); StringBuilder sb = new StringBuilder(); System.IO.StringWriter textwriter = new System.IO.StringWriter(sb); HtmlTextWriter htmlwriter = new HtmlTextWriter(textwriter); gv.RenderControl(htmlwriter);%> <%= sb.ToString() %> This code might looks odd in your presentation view. A more better approach is to create a HTML Helper method which contains the above code. Summary : In some cases you might needs to use existing ASP.NET Web Forms server controls but also dislikes ViewState. In this article i try to solve this gap by using the RenderControl method of Control class. Hopefully you enjoyed and become ready to create HTML helpers for many of the existing server controls.

Read the article

Windows 7 doesn't boot after Ubuntu install

- by Omu

I had windows 7 installed on my pc, then I installed Ubuntu 10.10/ During the installation process I have chosen to manually set my partitions: I set a 10GB drive for ubuntu root 1GB drive for swap and for boot drive I've chosen the one used by windows 7 Now I can boot ubuntu, I have the windows 7 option in the boot list, but when I choose Windows 7, it shows me a black screen for a second and returns back to boot screen. Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== = Windows is installed in the MBR of /dev/sda sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Grub 2 Boot sector info: Grub 2 is installed in the boot sector of sda1 and looks at sector 304908237 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sda3: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda4: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 63 62,894,474 62,894,412 7 HPFS/NTFS /dev/sda2 62,894,478 291,579,749 228,685,272 7 HPFS/NTFS /dev/sda3 291,579,811 309,157,937 17,578,127 5 Extended /dev/sda5 291,579,813 309,157,937 17,578,125 83 Linux /dev/sda4 309,159,936 312,580,095 3,420,160 82 Linux swap / Solaris blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 1266BB2766BB0A8D ntfs /dev/sda2 BEDBF1147C76F703 ntfs DATA /dev/sda3: PTTYPE="dos" /dev/sda4 dd38226d-c7c9-4ae5-a726-6d18d34a22e4 swap /dev/sda5 e1dafd1c-f855-406b-8f9a-f9d527c70255 ext4 /dev/sda: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 1266bb2766bb0a8d chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda5 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda4 during installation UUID=dd38226d-c7c9-4ae5-a726-6d18d34a22e4 none swap sw 0 0 =================== sda5: Location of files loaded by Grub: =================== 156.1GB: boot/grub/core.img 156.3GB: boot/grub/grub.cfg 149.9GB: boot/initrd.img-2.6.35-22-generic 156.3GB: boot/vmlinuz-2.6.35-22-generic 149.9GB: initrd.img 156.3GB: vmlinuz

Search Results

Search found 56327 results on 2254 pages for 'console application'.

Page 799/2254 | < Previous Page | 795 796 797 798 799 800 801 802 803 804 805 806 | Next Page >

- by Dewald Galjaard

- by arungupta

- by terje

- by Ahmed Awan

- by Jason Fitzpatrick

- by Rick Strahl

- by rsteckly

- by Michael Snow

- by ZacharyH

- by ultan o'broin

- by Shaun

- by Pinal Dave

- by MarkPearl

- by Your DisplayName here!

- by Hailwood

- by Daniel

- by BuckWoody

- by Martin Hinshelwood

- by jamiet

- by jamiet

- by imran_ku07

- by Omu

< Previous Page | 795 796 797 798 799 800 801 802 803 804 805 806 | Next Page >