Search Results

Search found 6580 results on 264 pages for 'require'.

Page 93/264 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • The Presentation Isn't Over Until It's Over

    - by Phil Factor
    The senior corporate dignitaries settled into their seats looking important in a blue-suited sort of way. The lights dimmed as I strode out in front to give my presentation.  I had ten vital minutes to make my pitch.  I was about to dazzle the top management of a large software company who were considering the purchase of my software product. I would present them with a dazzling synthesis of diagrams, graphs, followed by  a live demonstration of my software projected from my laptop.  My preparation had been meticulous: It had to be: A year’s hard work was at stake, so I’d prepared it to perfection.  I stood up and took them all in, with a gaze of sublime confidence. Then the laptop expired. There are several possible alternative plans of action when this happens     A. Stare at the smoking laptop vacuously, flapping ones mouth slowly up and down     B. Stand frozen like a statue, locked in indecision between fright and flight.     C. Run out of the room, weeping     D. Pretend that this was all planned     E. Abandon the presentation in favour of a stilted and tedious dissertation about the software     F. Shake your fist at the sky, and curse the sense of humour of your preferred deity I started for a few seconds on plan B, normally referred to as the ‘Rabbit in the headlamps of the car’ technique. Suddenly, a little voice inside my head spoke. It spoke the famous inane words of Yogi Berra; ‘The game isn't over until it's over.’ ‘Too right’, I thought. What to do? I ran through the alternatives A-F inclusive in my mind but none appealed to me. I was completely unprepared for this. Nowadays, longevity has since taught me more than I wanted to know about the wacky sense of humour of fate, and I would have taken two laptops. I hadn’t, but decided to do the presentation anyway as planned. I started out ignoring the dead laptop, but pretending, instead that it was still working. The audience looked startled. They were expecting plan B to be succeeded by plan C, I suspect. They weren’t used to denial on this scale. After my introductory talk, which didn’t require any visuals, I came to the diagram that described the application I’d written.  I’d taken ages over it and it was hot stuff. Well, it would have been had it been projected onto the screen. It wasn’t. Before I describe what happened then, I must explain that I have thespian tendencies.  My  triumph as Professor Higgins in My Fair Lady at the local operatic society is now long forgotten, but I remember at the time of my finest performance, the moment that, glancing up over the vast audience of  moist-eyed faces at the during the poignant  scene between Eliza and Higgins at the end, I  realised that I had a talent that one day could possibly  be harnessed for commercial use I just talked about the diagram as if it was there, but throwing in some extra description. The audience nodded helpfully when I’d done enough. Emboldened, I began a sort of mime, well, more of a ballet, to represent each slide as I came to it. Heaven knows I’d done my preparation and, in my mind’s eye, I could see every detail, but I had to somehow project the reality of that vision to the audience, much the same way any actor playing Macbeth should do the ghost of Banquo.  My desperation gave me a manic energy. If you’ve ever demonstrated a windows application entirely by mime, gesture and florid description, you’ll understand the scale of the challenge, but then I had nothing to lose. With a brief sentence of description here and there, and arms flailing whilst outlining the size and shape of  graphs and diagrams, I used the many tricks of mime, gesture and body-language  learned from playing Captain Hook, or the Sheriff of Nottingham in pantomime. I set out determinedly on my desperate venture. There wasn’t time to do anything but focus on the challenge of the task: the world around me narrowed down to ten faces and my presentation: ten souls who had to be hypnotized into seeing a Windows application:  one that was slick, well organized and functional I don’t remember the details. Eight minutes of my life are gone completely. I was a thespian berserker.  I know however that I followed the basic plan of building the presentation in a carefully controlled crescendo until the dazzling finale where the results were displayed on-screen.  ‘And here you see the results, neatly formatted and grouped carefully to enhance the significance of the figures, together with running trend-graphs!’ I waved a mime to signify an animated  window-opening, and looked up, in my first pause, to gaze defiantly  at the audience.  It was a sight I’ll never forget. Ten pairs of eyes were gazing in rapt attention at the imaginary window, and several pairs of eyes were glancing at the imaginary graphs and figures.  I hadn’t had an audience like that since my starring role in  Beauty and the Beast.  At that moment, I realized that my desperate ploy might work. I sat down, slightly winded, when my ten minutes were up.  For the first and last time in my life, the audience of a  ‘PowerPoint’ presentation burst into spontaneous applause. ‘Any questions?’ ‘Yes,  Have you got an agent?’ Yes, in case you’re wondering, I got the deal. They bought the software product from me there and then. However, it was a life-changing experience for me and I have never ever again trusted technology as part of a presentation.  Even if things can’t go wrong, they’ll go wrong and they’ll kill the flow of what you’re presenting.  if you can’t do something without the techno-props, then you shouldn’t do it.  The greatest lesson of all is that great presentations require preparation and  ‘stage-presence’ rather than fancy graphics. They’re a great supporting aid, but they should never dominate to the point that you’re lost without them.

    Read the article

  • Rspec2, Rails3, Authlogic: Can't run specs

    - by Sam
    When I do rspec spec in my rails project, I get No examples were matched. Perhaps {:if=>#<Proc:0x0000010126e998@/Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/configuration.rb:50 (lambda)>, :unless=>#<Proc:0x0000010126e970@/Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/configuration.rb:51 (lambda)>} is excluding everything? Finished in 0.00004 seconds 0 examples, 0 failures Now, this seems like maybe if I wrote a spec it would work, but as soon as I write a spec (and I do include spec_helper) /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/backward_compatibility.rb:20:in `const_missing': uninitialized constant Authlogic (NameError) from /{myapp}/app/models/user_session.rb:1:in `<top (required)>' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/engine.rb:138:in `block (2 levels) in eager_load!' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/engine.rb:137:in `each' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/engine.rb:137:in `block in eager_load!' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/engine.rb:135:in `each' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/engine.rb:135:in `eager_load!' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/application.rb:108:in `eager_load!' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/application/finisher.rb:41:in `block in <module:Finisher>' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/initializable.rb:25:in `instance_exec' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/initializable.rb:25:in `run' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/initializable.rb:50:in `block in run_initializers' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/initializable.rb:49:in `each' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/initializable.rb:49:in `run_initializers' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/application.rb:134:in `initialize!' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/railties-3.0.3/lib/rails/application.rb:77:in `method_missing' from /{myapp}/config/environment.rb:5:in `<top (required)>' from <internal:lib/rubygems/custom_require>:29:in `require' from <internal:lib/rubygems/custom_require>:29:in `require' from /{myapp}/spec/spec_helper.rb:3:in `<top (required)>' from <internal:lib/rubygems/custom_require>:29:in `require' from <internal:lib/rubygems/custom_require>:29:in `require' from /{myapp}/spec/controllers/pages_controller_spec.rb:1:in `<top (required)>' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/configuration.rb:388:in `load' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/configuration.rb:388:in `block in load_spec_files' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/configuration.rb:388:in `map' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/configuration.rb:388:in `load_spec_files' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/command_line.rb:18:in `run' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/runner.rb:55:in `run_in_process' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/runner.rb:46:in `run' from /Users/samliu/.rvm/gems/ruby-1.9.2-p0@rails3/gems/rspec-core-2.3.1/lib/rspec/core/runner.rb:10:in `block in autorun' The important line here seems to be /core/backward_compatibility.rb:20:in `const_missing': uninitialized constant Authlogic (NameError) Now if this were rails 2.3.8, I'd simply put config.gem "authlogic" into the environment.rb, in the initialization code block. However, the rails 3 environment.rb looks way different (there is no config code block, so putting it in arbitrarily causes an error where config is not defined). So my questions are 1) Do I actually have to put the gem config anywhere? I looked at https://github.com/trevmex/authlogic_rails3_example/ and it seems he didn't put it anywhere. 2) Does anyone know what I'm doing wrong in terms of rspec? My gem list is *** LOCAL GEMS *** abstract (1.0.0) actionmailer (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2, 2.3.4) actionpack (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2, 2.3.4) activemodel (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2) activerecord (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2, 2.3.4) activeresource (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2, 2.3.4) activesupport (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2, 2.3.4) arel (2.0.6, 1.0.1) asdf (0.5.0) authlogic (2.1.6, 2.1.3) autotest (4.4.6, 4.4.1) autotest-fsevent (0.2.4) autotest-growl (0.2.9) autotest-rails (4.1.0) autotest-rails-pure (4.1.2) bluecloth (2.0.9) builder (2.1.2) bundler (1.0.7, 1.0.2) cgi_multipart_eof_fix (2.5.0) commonwatir (1.6.2) couchrest (0.33) cri (1.0.1) cucumber (0.4.4, 0.4.3, 0.3.11) daemons (1.1.0, 1.0.10) dependencies (0.0.7) diff-lcs (1.1.2) erubis (2.6.6) fastercsv (1.5.0) fastthread (1.0.7) firewatir (1.6.2) flay (1.4.0) flog (2.2.0) funfx (0.2.2) gem_plugin (0.2.3) gemsonrails (0.7.2) giraffesoft-resource_controller (0.6.5) haml (2.2.14) hoe (2.3.3) i18n (0.4.1) jscruggs-metric_fu (1.1.5) json_pure (1.1.9) kramdown (0.12.0) mail (2.2.13, 2.2.6.1) memcache-client (1.8.5) mime-types (1.16) mojombo-chronic (0.3.0) mongrel (1.1.5) monk (0.0.7) nanoc (3.1.5) nanoc3 (3.1.5) nokogiri (1.4.3.1, 1.4.0) open4 (0.9.6) polyglot (0.3.1, 0.2.9) rack (1.2.1, 1.0.1) rack-mount (0.6.13) rack-test (0.5.6) rails (3.0.0, 2.3.4) rails3-generators (0.17.0, 0.14.0) railties (3.0.3, 3.0.1, 3.0.0, 3.0.0.rc2) rake (0.8.7) relevance-rcov (0.9.2.1) rest-client (1.0.3) rspec (2.3.0, 2.0.0.rc, 1.2.9) rspec-core (2.3.1, 2.0.0.rc) rspec-expectations (2.3.0, 2.0.0.rc) rspec-mocks (2.3.0, 2.0.0.rc) rspec-rails (2.3.1, 2.0.0.rc, 1.2.9) ruby_parser (2.0.4) rubyforge (2.0.3) rubygems-update (1.3.6, 1.3.5) rvm (1.0.13) s4t-utils (1.0.4) safariwatir (0.3.7) sexp_processor (3.0.3) spork (0.7.3) sqlite3-ruby (1.3.1, 1.2.5) sys-uname (0.8.5) term-ansicolor (1.0.4) text-format (1.0.0) text-hyphen (1.0.0) thor (0.14.6, 0.14.3, 0.12.0) treetop (1.4.8, 1.4.2) tzinfo (0.3.23) user-choices (1.1.6) vlad (2.0.0) vlad-git (2.1.0) webrat (0.7.1, 0.6.0, 0.5.3) xml-simple (1.0.12) ZenTest (4.4.2) I am using ruby 1.9.2 and rails 3.0.3 installed using RVM on OSX 10.6 Snow Leopard. I just want to be able to run my specs like I used to. As a separate issue, autotest yields an error about an include for autotest/growl but I installed autotest-growl. Maybe this is a gem issue? I tried doing the same things and get the same error when it comes to using my ubuntu 10.04 server machine though. Gemfile source 'http://rubygems.org' gem 'rails', '3.0.3' # Bundle edge Rails instead: # gem 'rails', :git => 'git://github.com/rails/rails.git' gem 'sqlite3-ruby', :require => 'sqlite3' group :couch do gem 'couchrest' end group :user_auth do gem 'authlogic' gem "rails3-generators" gem 'facebooker' end group :markup do gem 'haml' gem 'sass' end group :testing do gem 'rspec-rails' gem 'rspec' gem 'webrat' gem 'cucumber' gem 'capybara' gem 'factory_girl' gem 'shoulda' gem 'autotest' end group :server do gem 'unicorn' end # Use unicorn as the web server # gem 'unicorn' # Deploy with Capistrano # gem 'capistrano' # To use debugger # gem 'ruby-debug' # Bundle the extra gems: # gem 'bj' # gem 'nokogiri' # gem 'sqlite3-ruby', :require => 'sqlite3' # gem 'aws-s3', :require => 'aws/s3' # Bundle gems for the local environment. Make sure to # put test-only gems in this group so their generators # and rake tasks are available in development mode: # group :development, :test do # gem 'webrat' # end Gemfile.lock GEM remote: http://rubygems.org/ specs: ZenTest (4.4.2) abstract (1.0.0) actionmailer (3.0.3) actionpack (= 3.0.3) mail (~> 2.2.9) actionpack (3.0.3) activemodel (= 3.0.3) activesupport (= 3.0.3) builder (~> 2.1.2) erubis (~> 2.6.6) i18n (~> 0.4) rack (~> 1.2.1) rack-mount (~> 0.6.13) rack-test (~> 0.5.6) tzinfo (~> 0.3.23) activemodel (3.0.3) activesupport (= 3.0.3) builder (~> 2.1.2) i18n (~> 0.4) activerecord (3.0.3) activemodel (= 3.0.3) activesupport (= 3.0.3) arel (~> 2.0.2) tzinfo (~> 0.3.23) activeresource (3.0.3) activemodel (= 3.0.3) activesupport (= 3.0.3) activesupport (3.0.3) arel (2.0.6) authlogic (2.1.6) activesupport autotest (4.4.6) ZenTest (>= 4.4.1) builder (2.1.2) capybara (0.4.0) celerity (>= 0.7.9) culerity (>= 0.2.4) mime-types (>= 1.16) nokogiri (>= 1.3.3) rack (>= 1.0.0) rack-test (>= 0.5.4) selenium-webdriver (>= 0.0.27) xpath (~> 0.1.2) celerity (0.8.6) childprocess (0.1.6) ffi (~> 0.6.3) couchrest (1.0.1) json (>= 1.4.6) mime-types (>= 1.15) rest-client (>= 1.5.1) cucumber (0.10.0) builder (>= 2.1.2) diff-lcs (~> 1.1.2) gherkin (~> 2.3.2) json (~> 1.4.6) term-ansicolor (~> 1.0.5) culerity (0.2.13) diff-lcs (1.1.2) erubis (2.6.6) abstract (>= 1.0.0) facebooker (1.0.75) json_pure (>= 1.0.0) factory_girl (1.3.2) ffi (0.6.3) rake (>= 0.8.7) gherkin (2.3.2) json (~> 1.4.6) term-ansicolor (~> 1.0.5) haml (3.0.25) i18n (0.5.0) json (1.4.6) json_pure (1.4.6) kgio (2.0.0) mail (2.2.13) activesupport (>= 2.3.6) i18n (>= 0.4.0) mime-types (~> 1.16) treetop (~> 1.4.8) mime-types (1.16) nokogiri (1.4.4) polyglot (0.3.1) rack (1.2.1) rack-mount (0.6.13) rack (>= 1.0.0) rack-test (0.5.6) rack (>= 1.0) rails (3.0.3) actionmailer (= 3.0.3) actionpack (= 3.0.3) activerecord (= 3.0.3) activeresource (= 3.0.3) activesupport (= 3.0.3) bundler (~> 1.0) railties (= 3.0.3) rails3-generators (0.17.0) railties (>= 3.0.0) railties (3.0.3) actionpack (= 3.0.3) activesupport (= 3.0.3) rake (>= 0.8.7) thor (~> 0.14.4) rake (0.8.7) rest-client (1.6.1) mime-types (>= 1.16) rspec (2.3.0) rspec-core (~> 2.3.0) rspec-expectations (~> 2.3.0) rspec-mocks (~> 2.3.0) rspec-core (2.3.1) rspec-expectations (2.3.0) diff-lcs (~> 1.1.2) rspec-mocks (2.3.0) rspec-rails (2.3.1) actionpack (~> 3.0) activesupport (~> 3.0) railties (~> 3.0) rspec (~> 2.3.0) rubyzip (0.9.4) sass (3.1.0.alpha.206) selenium-webdriver (0.1.2) childprocess (~> 0.1.5) ffi (~> 0.6.3) json_pure rubyzip shoulda (2.11.3) sqlite3-ruby (1.3.2) term-ansicolor (1.0.5) thor (0.14.6) treetop (1.4.9) polyglot (>= 0.3.1) tzinfo (0.3.23) unicorn (3.1.0) kgio (~> 2.0.0) rack webrat (0.7.2) nokogiri (>= 1.2.0) rack (>= 1.0) rack-test (>= 0.5.3) xpath (0.1.2) nokogiri (~> 1.3) PLATFORMS ruby DEPENDENCIES authlogic autotest capybara couchrest cucumber facebooker factory_girl haml rails (= 3.0.3) rails3-generators rspec rspec-rails sass shoulda sqlite3-ruby unicorn webrat

    Read the article

  • VMWare Server 2 Install is Failing w/ Error 25032: "failed to customize windows logon process"

    - by Justin Searls
    VMWare Server 2 install question here.* Straightforward question that would probably require a VMWare expert to pull apart, given that Google has been totally worthless on this. On a patched Windows XP machine, any attempt to install VMWare Server 2.0.1 results in failure, just prior to completion (progress bar is full but I can tell network adapter stuff hasn't been fired yet and most of the services haven't been instaled). The error: Error 25032. Failed to customize Windows logon process (). Please contact your administrator. Upon dismissing the error, you're treated to: Warning 25033. Failed to remove Windows logon customization (VMGINA.DLL). Please contact your administrator. Clicking "OK" rolls back your installation. Killing the installer and hoping that it somehow leaves a working install behind was also unproductive. *I hope install troubleshooting isn't outside the purview of serverfault, I'm typically an SO user.

    Read the article

  • wildcard ssl certificate - exchange 2010 - POP/IMAP problem

    - by Sise
    previously we have requested a wildcard ssl certificate from godaddy for our major domain. one of the reasons was the new established exchange server 2010. usually you require following names included in certificiate: FQDN (e.g. mail.whatever.com) Hostname (mail) Domain name (whatever.com) Autodiscover.whatever.com MX Record with the wildcard certificate these are all covered (except of the local hostname). During creation/importing of the ssl certificate into exchange 2010, exchange first asks, if a wildcard certificate is used and then encounters an error - due to the certificate is a wildcard certificate and not a certificate especially generated for the FQDN, SSL for POP and IMAP can not be provided. couldn't find any workaround or solution for this on google, so I hope, maybe some one here has an answer or solution for me! :) the exchange 2010 is running on a windows server 2008 R2 enterprise. thanks in advance and best regards, sise

    Read the article

  • Ruby Debug IDE error : ruby-debug-ide-0.4.9/lib/ruby-debug-ide.rb:109:in `debug_load'

    - by Paul
    I hope someone can assist me. I have RubyMine 2.0.2 installed on Windows 7 32 bit computer. Since a week ago (I presume it must have been after I have update some gems) I cant seem to debug form the IDE. I am trying to debug a rake task which I could before. Running the rake task normally works perfect, just debug doesnt. Its not just limited to the rake, I cant debug any ruby files. I've tried installing older versions of debug-ide and debug-base but to no success. I've tried it with ruby 1.8.7 and 1.8.6 on different computers but nothing. Trying to search the web gave some information, which I've tried, but also no success. Im desperate to get this working. Below are the full error and my current settings: Error: C:\InstantRails\ruby\bin\ruby.exe -e STDOUT.sync=true;STDERR.sync=true;load($0=ARGV.shift) C:\InstantRails\ruby\bin/rdebug-ide --port 57167 -- C:/InstantRails/rails_apps/paperserve/lib/tasks/poll_snmp.rake Fast Debugger (ruby-debug-ide 0.4.9) listens on :57167 C:/InstantRails/rails_apps/paperserve/lib/tasks/poll_snmp.rake:5 C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/lib/ruby-debug ide.rb:109:in `debug_load' C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/lib/ruby-debug ide.rb:109:in `debug_program' C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/bin/rdebug-ide:87 C:\InstantRails\ruby\bin/rdebug-ide:19:in `load' C:\InstantRails\ruby\bin/rdebug-ide:19 -e:1:in `load' -e:1 Uncaught exception: undefined method `namespace' for main:Object Process finished with exit code 1 Code snippet (It fails at the start of namespace. If I remove this, it fails on the next line, etc, etc) #This script should run every 15 minutes require 'snmp' require 'yaml' namespace :cdeweb do RubyGems Environment: RUBYGEMS VERSION: 1.3.7 RUBY VERSION: 1.8.6 (2007-09-24 patchlevel 111) [i386-mswin32] INSTALLATION DIRECTORY: C:/InstantRails/ruby/lib/ruby/gems/1.8 RUBY EXECUTABLE: C:/InstantRails/ruby/bin/ruby.exe EXECUTABLE DIRECTORY: C:/InstantRails/ruby/bin RUBYGEMS PLATFORMS: ruby x86-mswin32-60 GEM PATHS: C:/InstantRails/ruby/lib/ruby/gems/1.8 C:/Users/Paul.LPFSYSTEMS/.gem/ruby/1.8 GEM CONFIGURATION: :update_sources = true :verbose = true :benchmark = false :backtrace = false :bulk_threshold = 1000 REMOTE SOURCES: http://rubygems.org/ * LOCAL GEMS * actionmailer (2.3.5, 2.0.2) actionpack (2.3.5, 2.0.2) activerecord (2.3.5, 2.0.2) activeresource (2.3.5, 2.0.2) activesupport (2.3.5, 2.0.2) capistrano (2.5.18, 2.1.0) cgi_multipart_eof_fix (2.5.0) cmdparse (2.0.2) columnize (0.3.1) fxri (0.3.7, 0.3.6) fxruby (1.6.12 mswin32) gem_plugin (0.2.3) highline(1.5.2, 1.4.0) hpricot (0.8.2 x86-mswin32, 0.6 mswin32) inaction_mailer (0.6) json (1.4.2 x86-mswin32) json_pure (1.4.2) linecache (0.43 mswin32) log4r (1.1.7, 1.0.5) mongrel (1.1.5 x86-mswin32-60, 1.1.2 mswin32) mysql(2.8.1 x86-mswin32, 2.7.3 mswin32) needle (1.3.0) net-scp (1.0.2) net-sftp (2.0.4, 1.1.0) net-ssh (2.0.22, 1.1.2) net-ssh-gateway (1.0.1) rack (1.0.1) rails (2.3.5, 2.0.2) rake (0.8.7, 0.8.1, 0.8.0, 0.7.3) ruby-debug-base (0.10.3 mswin32) ruby-debug-ide (0.4.9) ruby-net-ldap (0.0.4) rubygems-update (1.3.7, 1.3.6, 1.0.1) snmp (1.0.2) sources (0.0.1) sqlite3-ruby (1.2.5 x86-mswin32, 1.2.1 mswin32) win32-api (1.4.6 x86-mswin32-60, 1.0.4 mswin32) win32-clipboard (0.5.2, 0.4.3) win32-dir (0.3.6, 0.3.2) win32-eventlog (0.5.2, 0.4.6) win32-file (0.6.3, 0.5.4) win32-file-stat (1.3.4, 1.2.7) win32-process (0.6.2, 0.5.3) win32-sapi (0.1.5, 0.1.4) win32-sound (0.4.2, 0.4.1) windows-api (0.4.0, 0.2.0)

    Read the article

  • Mixing SSL and non-SSL content in an Apache2 virtual host

    - by gravyface
    I have a (hopefully) common scenario for one of my sites that I just can't seem to figure out how to deploy correctly. I have the following site and directories for example.com: These need to require SSL: /var/www/example.com/admin /var/www/example.com/order These need to be non-SSL: /var/www/example.com/maps These need to support both: /var/www/example.com/css /var/www/example.com/js /var/www/example.com/img I have two virtual host declarations for the one site in my /sites-available/example.com file; the top one is *:443 the second one is *:80. Since I have two sites, and if a request comes in on 443, the top virtualhost is used, same with the bottom if it's a port 80 request. However, I can't seem to enforce my SSL requirements using SSLRequireSSL because I'm assuming a port 80 request to /admin or /order is not even hitting the *:443 vhost. Should I just Deny All to /order and /admin within the *:80 virtual host so that if you try to request it on 80, you'll get a 403 Forbidden?

    Read the article

  • Windows 7: how to let AutoConfigURL change be effective immediately?

    - by Jeroen Pluimers
    I want to set both the script and the "Use automatic configuration script" checkbox in Windows 7 using a script that immediately affects anything using wininet.dll (Internet Explorer, Chrome, .NET apps, etc). I've done a before/after registry diff, and tried doing this through the registry, but things like the reg files below require the apps to be restarted. Chaning the settings by pressing the "LAN Settings" button through this Control panel shortcut has immediate affect: %windir%\system32\control.exe Inetcpl.cpl,,4 How can I script this immediate effect? These are the registry script files: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=”http://www.company.com/proxy.pac” (registry scripts borrowed from http://danny.quantumspark.net/wordpress/) [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=- --jeroen (who is checking out the notify function at superuser.com)

    Read the article

  • Can't get the L2TP IPSEC up and running

    - by Maciej Swic
    i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

    Read the article

  • Very large database, very small portion most being retrieved in real time

    - by mingyeow
    Hi folks, I have an interesting database problem. I have a DB that is 150GB in size. My memory buffer is 8GB. Most of my data is rarely being retrieved, or mainly being retrieved by backend processes. I would very much prefer to keep them around because some features require them. Some of it (namely some tables, and some identifiable parts of certain tables) are used very often in a user facing manner How can I make sure that the latter is always being kept in memory? (there is more than enough space for these) More info: We are on Ruby on rails. The database is MYSQL, our tables are stored using INNODB. We are sharding the data across 2 partitions. Because we are sharding it, we store most of our data using JSON blobs, while indexing only the primary keys

    Read the article

  • Sending emails from PHP - email providers vs GAE

    - by nrph
    I need to send emails from my social service (this is continuation of Experiences in mailing to registered users). I got strong feeling that it's better to avoid problems with email server configuration and maintance and to choose email provider which will take care of all painful problems. So several offers were compared: http://imgur.com/JkK2X.jpg Three of them look very attractive: Postageapp / Sendgrid / CritSend As alternative i'm considering setup GAE app. Email provider is quite easy to start work with, but have no idea how much effort require GAE to integrate with PHP. So my question is: which option is better to choose: email provider GAE ? Two factors are important here: business background (therefore prices are mentioned), work required to setup and maintain desired solution. Preferably i would love to avoid all email-related problems (like black lists and so on).

    Read the article

  • Disable .htaccess or disable some rules from .htaccess on specific URL

    - by petRUShka
    I have Kerberos-based authentication and I want to disable it on only root url: mysite.com/. And I want it to works fine on any other page like mysite.com/page1. I have such things in my .htaccess: AuthType Kerberos AuthName "Domain login" KrbAuthRealms DOMAIN.COM KrbMethodK5Passwd on Krb5KeyTab /etc/httpd/httpd.keytab require valid-user I want to turn it off only for root URL. As workaround it is possible to turn off using .htaccess in virtual host config. Unfortunately I don't know how to do it. Part of my vhost.conf: <Directory /home/user/www/current/public/> Options -MultiViews +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> It would be great if you can advice me something!

    Read the article

  • Apache2 Startup warning: NameVirtualHost *:80 has no VirtualHosts

    - by Kit Roed
    When my Ubuntu Apache server (apache2) starts up I get a warning message that reads: [warn] NameVirtualHost *:80 has no VirtualHosts however, the web server is working fine... could anyone explain what I might have wrong in my site's configuration to make it give me this warning? the config file in question (located in /etc/apache2/sites-available) reads like this (details removed for brevity) <VirtualHost *> <Location /mysite> # config details here... </Location> # use the following for authorization <LocationMatch "/mysite/login"> AuthType Basic AuthName "My Site" AuthUserFile /etc/sitepasswords/passwd Require valid-user </LocationMatch> </VirtualHost> Could the fact that I'm using <Location> be a part of the problem?

    Read the article

  • Setting up a VPN connection to Amazon VPC - routing

    - by Keeno
    I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

    Read the article

  • Openswan + xl2tpd connections time out after a while

    - by Halfgaar
    I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

    Read the article

  • Need help with setting up comet code

    - by Saif Bechan
    Does anyone know off a way or maybe think its possible to connect Node.js with Nginx http push module to maintain a persistent connection between client and browser. I am new to comet so just don't understand the publishing etc maybe someone can help me with this. What i have set up so far is the following. I downloaded the jQuery.comet plugin and set up the following basic code: Client JavaScript <script type="text/javascript"> function updateFeed(data) { $('#time').text(data); } function catchAll(data, type) { console.log(data); console.log(type); } $.comet.connect('/broadcast/sub?channel=getIt'); $.comet.bind(updateFeed, 'feed'); $.comet.bind(catchAll); $('#kill-button').click(function() { $.comet.unbind(updateFeed, 'feed'); }); </script> What I can understand from this is that the client will keep on listening to the url followed by /broadcast/sub=getIt. When there is a message it will fire updateFeed. Pretty basic and understandable IMO. Nginx http push module config default_type application/octet-stream; sendfile on; keepalive_timeout 65; push_authorized_channels_only off; server { listen 80; location /broadcast { location = /broadcast/sub { set $push_channel_id $arg_channel; push_subscriber; push_subscriber_concurrency broadcast; push_channel_group broadcast; } location = /broadcast/pub { set $push_channel_id $arg_channel; push_publisher; push_min_message_buffer_length 5; push_max_message_buffer_length 20; push_message_timeout 5s; push_channel_group broadcast; } } } Ok now this tells nginx to listen at port 80 for any calls to /broadcast/sub and it will give back any responses sent to /broadcast/pub. Pretty basic also. This part is not so hard to understand, and is well documented over the internet. Most of the time there is a ruby or a php file behind this that does the broadcasting. My idea is to have node.js broadcasting /broadcast/pub. I think this will let me have persistent streaming data from the server to the client without breaking the connection. I tried the long-polling approach with looping the request but I think this will be more efficient. Or is this not going to work. Node.js file Now to create the Node.js i'm lost. First off all I don't know how to have node.js to work in this way. The setup I used for long polling is as follows: var sys = require('sys'), http = require('http'); http.createServer(function (req, res) { res.writeHead(200, {'Content-Type': 'text/html'}); res.write(new Date()); res.close(); seTimeout('',1000); }).listen(8000); This listens to port 8000 and just writes on the response variable. For long polling my nginx.config looked something like this: server { listen 80; server_name _; location / { proxy_pass http://mydomain.com:8080$request_uri; include /etc/nginx/proxy.conf; } } This just redirected the port 80 to 8000 and this worked fine. Does anyone have an idea on how to have Node.js act in a way Comet understands it. Would be really nice and you will help me out a lot. Recources used An example where this is done with ruby instead of Node.js jQuery.comet Nginx HTTP push module homepage Faye: a Comet client and server for Node.js and Rack To use faye I have to install the comet client, but I want to use the one supplied with Nginx. Thats why I don't just use faye. The one nginx uses is much more optimzed. extra Persistant connections Going evented with Node.js

    Read the article

  • What are the steps to setup git-http-backend w/ Apache on Windows?

    - by Jordan
    I would like setup a Git server using the "Smart-HTTP" approach. However, I'm having difficulties getting it to work in Windows, and I'm new to Apache. My httpd.conf, in part: SetEnv GIT_PROJECT_ROOT "d:/repositories" SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ "C:/Program Files/Git/libexec/git-core/git-http-backend.exe" <VirtualHost 172.16.0.5:80> <LocationMatch "^/git/.*/git-receive-pack$"> AuthType Basic AuthName "Git Access" Require group committers </LocationMatch> </VirtualHost> Could someone provide the steps to setup a Git server using git-http-backend on Windows?

    Read the article

  • How much effort is SQL Server 2008 Administration?

    - by Adrian Grigore
    Hi, I am looking for a suitable hosting environment for an ASP.NET MVC application. One of the options I have is renting a Hyper-V server and installing my license of SQL Server 2008 on it. I'm a bit wary of shared hosting since the one I have tried so far did not seem to have very consistent performance. One potential problem is that I would have I do not not know much about SQL Server administration, so I am not sure if this is a good option. I've been running a failover cluster of two linux dedicated servers for over 5 years now and MySQL never gave me any trouble. But that was Linux, and it might be different with a windows system. Is running a halfway efficient MS SQL Server 2008 difficult? Does it require any in-depth administration knowledge? Or perhaps recurring administration effort (such as keeping the server up to date with the latest patches)? Or is it rather an "install and forget" experience similar to MySQL?

    Read the article

  • Offset the tickmarks of a secondary axis

    - by Dan
    I would like to offset the tickmarks of a secondary axis in excel WITHOUT changing the minimum. Here is a very complicated VBA class that apparently solves the issue but I would like a solution that doesn't require me to construct my entire chart in VBA. Here is an example of what I mean (I removed the chart insides so it looks funny, but really only the axes matter for this question): I am happy with the primary axis on the left. The secondary axis is just the primary axis plus 7.96%, so the secondary axis HAS TO have 0.0796 as a minimum. But I would like my tickmarks to be at nice rounder numbers so I would like to offset the starting point of the secondary axis' tickmarks to only start at 8%. Does anyone know of a way to achieve this? Just to be clear about the VBA, I am happy to use a VBA solution but I don't have the time to actually construct the chart itself in VBA. Using VBA to get a handle on the chart and make the adjustment would be perfect.

    Read the article

  • How much RAM required by Varnish?

    - by Gobind Singh Deo
    Hi, I'm using Apache for serving static files. Apache2 require too much RAM. I want to reduce the RAM usage. I don't have experience with Varnish. It's said to be faster. I don't know how Varnish works. So, How much RAM needed for running Apache2+Varnish? Will Apache2+Varnish have higher RAM usage than Apache2 without Varnish? Thanks.

    Read the article

  • Problems with wireless file copy - hangs during copy

    - by Eran Kampf
    I have this problem on my home network where when I try to copy files via wireless connection, at some point the copy fails and the machine doing the copy loses connection to the network. I'm pretty much lost as to figuring out the source for the problem... Some more details that might help: It's not OS related. I have Windows 7 machines and Leopard machines and this occurs on both I'm using a 3com OfficeConnect router Wired transfer works fine Other programs that require heavy wireless traffic work just fine:streaming large HD movies, Xbox Live! ... I'm lost as to how to even begin trying to diagnose the problem so any tips are welcome...

    Read the article

  • Subversion error: Repository moved permanently to please relocate

    - by Bart S.
    I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> Options +indexes DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this?

    Read the article

  • Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

    - by Chris Beach
    This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

    Read the article

  • Running emacs in GNU Screen overrides .emacs settings for [home] key binding in FreeBSD 8.2

    - by javanix
    If I use the following .emacs file, I am able to go to the beginning/end of the current line using the home/end keys as I would expect. (keyboard-translate ?\C-h ?\C-?) (add-to-list 'load-path "/home/sam/programs/go/go/misc/emacs/" t) (require 'go-mode-load) (global-set-key [kp-home] 'beginning-of-line) ; [Home] (global-set-key [home] 'beginning-of-line) ; [Home] (global-set-key [kp-end] 'end-of-line) ; [End] (global-set-key [end] 'end-of-line) ; [End] However, if I open up a screen session it does not function like this (the [home] key still brings me to the beginning of the buffer for some reason). Here is my .screenrc file if anyone can spot anything funky in there: term xterm defutf8 on defflow off startup_message off # terminfo and termcap for nice 256 color terminal # allow bold colors - necessary for some reason attrcolor b ".I" # tell screen how to set colors. AB = background, AF=foreground termcapinfo xterm 'Co#256:AB=\E[48;5;%dm:AF=\E[38;5;%dm' #use bash as the default login shell defshell -bash

    Read the article

  • how do I access XHR responseBody from Javascript?

    - by Cheeso
    I've got a web page that uses XMLHttpRequest to download a binary resource. Because it's binary I'm trying to use xhr.responseBody to access the bytes. I've seen a few posts suggesting that it's impossible to access the bytes directly from Javascript. This sounds crazy to me. Weirdly, xhr.responseBody is accessible from VBScript, so the suggestion is that I must define a method in VBScript in the webpage, and then call that method from Javascript. See jsdap for one example. var IE_HACK = (/msie/i.test(navigator.userAgent) && !/opera/i.test(navigator.userAgent)); if (IE_HACK) document.write('<script type="text/vbscript">\n\ Function BinaryToArray(Binary)\n\ Dim i\n\ ReDim byteArray(LenB(Binary))\n\ For i = 1 To LenB(Binary)\n\ byteArray(i-1) = AscB(MidB(Binary, i, 1))\n\ Next\n\ BinaryToArray = byteArray\n\ End Function\n\ </script>'); var xml = (window.XMLHttpRequest) ? new XMLHttpRequest() // Mozilla/Safari/IE7+ : (window.ActiveXObject) ? new ActiveXObject("MSXML2.XMLHTTP") // IE6 : null; // Commodore 64? xml.open("GET", url, true); if (xml.overrideMimeType) { xml.overrideMimeType('text/plain; charset=x-user-defined'); } else { xml.setRequestHeader('Accept-Charset', 'x-user-defined'); } xml.onreadystatechange = function() { if (xml.readyState == 4) { if (!binary) { callback(xml.responseText); } else if (IE_HACK) { // call a VBScript method to copy every single byte callback(BinaryToArray(xml.responseBody).toArray()); } else { callback(getBuffer(xml.responseText)); } } }; xml.send(''); Is this really true? The best way? copying every byte? For a large binary stream that's not gonna be very efficient. There is also a possible technique using ADODB.Stream, which is a COM equivalent of a MemoryStream. See here for an example. It does not require VBScript but does require a separate COM object. if (typeof (ActiveXObject) != "undefined" && typeof (httpRequest.responseBody) != "undefined") { // Convert httpRequest.responseBody byte stream to shift_jis encoded string var stream = new ActiveXObject("ADODB.Stream"); stream.Type = 1; // adTypeBinary stream.Open (); stream.Write (httpRequest.responseBody); stream.Position = 0; stream.Type = 1; // adTypeBinary; stream.Read.... /// ???? what here } I don't think that's gonna work - ADODB.Stream is disabled on most machines these days. In The IE8 developer tools - the IE equivalent of Firebug - I can see the responseBody is an array of bytes and I can even see the bytes themselves. The data is right there. I don't understand why I can't get to it. Is it possible for me to read it with responseText? hints? (other than defining a VBScript method)

    Read the article

  • rubygem Twitter4R Issues

    - by Leonardo Dario Perna
    Hi everyone, I'm trying to get started with twitter4r but I'm having some issues: Why I can't load the gem in IRB? $ sudo gem install twitter4r Successfully installed twitter4r-0.3.2 1 gem installed Installing ri documentation for twitter4r-0.3.2... Installing RDoc documentation for twitter4r-0.3.2... $ irb require 'rubygems' = false require 'twitter4r' LoadError: no such file to load -- twitter4r from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from (irb):2 I've downloaded the http://files.rubyforge.vm.bytemark.co.uk/twitter4r/twitter4rails.post-0_2_4.zip app and it works only with twitter4r-0.2.4 and NOT with last version twitter4r-0.3.2: $ script/server ./script/../config/boot.rb:26:Warning: Gem::SourceIndex#search support for String patterns is deprecated, use #find_name = Booting Mongrel (use 'script/server webrick' to force WEBrick) = Rails application starting on http://0.0.0.0:3000 = Call with -d to detach = Ctrl-C to shutdown server ** Starting Mongrel listening at 0.0.0.0:3000 ** Starting Rails with development environment... Exiting /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- twitter/rails (MissingSourceFile) from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ ruby/gems/1.8/gems/activesupport-1.4.2/lib/active_support/ dependencies.rb:495:in `require' from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ ruby/gems/1.8/gems/activesupport-1.4.2/lib/active_support/ dependencies.rb:342:in `new_constants_in' from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ ruby/gems/1.8/gems/activesupport-1.4.2/lib/active_support/ dependencies.rb:495:in `require' from /Users/leonardodarioperna/Projects/Kaaaki/marrakaaaki/ twitter4rails.post-0_2_4/config/environment.rb:64 from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ ruby/gems/1.8/gems/activesupport-1.4.2/lib/active_support/ dependencies.rb:495:in `require' ... 23 levels... from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ ruby/gems/1.8/gems/rails-1.2.3/lib/commands/server.rb:39 from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3 Last thing, in the /config/environment.rb I need to specify: RAILS_GEM_VERSION = '1.2.3' unless defined? RAILS_GEM_VERSION if I use my last rails version: RAILS_GEM_VERSION = '2.3.4' unless defined? RAILS_GEM_VERSION I get this error: $ script/server -p3002 = Booting Mongrel = Rails 2.3.4 application starting on http://0.0.0.0:3000 /Library/Ruby/Site/1.8/rubygems.rb:280:in `activate': can't activate activerecord (= 1.15.6, runtime) for [], already activated activerecord-2.3.4 for ["rails-2.3.4"] (Gem::LoadError) from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:35:in `require' from /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/ active_support/dependencies.rb:156:in `require' from /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/ active_support/dependencies.rb:521:in `new_constants_in' from /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/ active_support/dependencies.rb:156:in `require' from /Library/Ruby/Gems/1.8/gems/twitter4r-0.2.4/lib/twitter/rails.rb: 6 from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/ active_support/dependencies.rb:156:in `require' ... 8 levels... from /Library/Ruby/Gems/1.8/gems/rails-2.3.4/lib/commands/server.rb: 84 from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3 And that's all :-) Thank you!

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >