Search Results

Search found 32 results on 2 pages for 'paragon'.

Page 1/2 | 1 2  | Next Page >

  • Any opinions on Paragon's NTFS for Mac solution?

    - by AngryHacker
    I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. I've been looking at buying Paragon NTFS for Mac OS X 7.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). Can someone tell me whether the product is stable and whether the speed claims are true.

    Read the article

  • HFS for Windows by Paragon BSOD

    - by texmex5
    Installed HFS for Windows 7 yesterday. Did a reboot. Copied some files from my internal drive to external hfs drive. Did another reboot and rebooted to Mac. Mac worked fine. Then yesterday the battery went dead on my mac and the computer switched off. This morning tried to boot into windows but got a BSOD as soon as I moved my mouse in the login screen. BSOD refeers to an error with service HFSPLUS.SYS Now when I try to boot into mac (pressing alt while restarding) the mac drive isn's shown and I can only boot into Windows 7 Safe Mode. Cannot uninstall HFS for Windows the uninstaller in control panel says: "THE WINDOWS INSTALLER SERVICE COULD NOT BE ACCESSED. THIS CAN OCCUR WHEN WINDOWS INSTALLER IS NOT CORRECTLY INSTALLED". SETUP: Intel Core 2 Duo, P8600 @ 2.40GHZ, 4GB RAM, WINDOWS 7 ULTIMATE 32 BIT

    Read the article

  • Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

    - by Steve
    I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

    Read the article

  • Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

    - by Steve
    I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

    Read the article

  • Opinions on NTFS for Mac solution?

    - by AngryHacker
    I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. In fact, it's painfully slow I've been looking at buying Paragon NTFS for Mac OS X 8.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). In addition, there is now an unsupported native solution with the snow leopard. Can folks here share their experiences. Is the native solution stable enough to be used for daily work? Should I just go with Paragon?

    Read the article

  • Why can I not use the full capacity of my SSD?

    - by bcmcfc
    I am using Paragon to migrate Windows 7 to an SSD. The C drive which should be migrated is a 100GB partition. During the process, Paragon formats the SSD to 80GB. Why doesn't it take the 100 GB? It later fails because it thinks there isn't enough space on the SSD. However the SSD is 11GB bigger than the partition, and only 45GB of the partition were used anyway. How do I get around this? Is there another tool to do the same job which does it better ?

    Read the article

  • Why does JavaScript's getElementsByClassName provide an object that is NOT an array?

    - by Paragon
    I'm trying to get a list in JavaScript (not using jQuery) of all the elements on the page with a specific class name. I therefore employ the getElementsByClassName() function as follows: var expand_buttons = document.getElementsByClassName('expand'); console.log(expand_buttons, expand_buttons.length, expand_buttons[0]); Note that I have three anchor elements on my page with the class 'expand'. This console.log() outputs [] 0 undefined Next, for kicks, I threw expand_buttons into its own array as follows: var newArray = new Array(expand_buttons); console.log(newArray, newArray.length); This suddenly outputs [NodeList[3]] 1 and I can click through the nodelist and see the attributes of the three 'expand' anchor elements on the page. It's also worth noting that I was able to get my code working in a w3schools test page. It may also be of note that my use of document.getElementsByName actually does output (to the console) an array of elements, but when I ask for its length, it tells me 0. Similarly, if I try to access an array element using array_name[0] as normal, it outputs 'undefined', despite there clearly being an element inside of an array when I print the object to the console. Does anybody have any idea why this might be? I just want to loop through DOM elements, and I'm avoiding jQuery at the moment because I'm trying to practice coding with vanilla JavaScript. Thanks, ParagonRG

    Read the article

  • How to change hybrid disk to basic disk in windows 7?

    - by Marco
    I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

    Read the article

  • Trouble loading an ISO

    - by crocyson
    I've created a boot disk and ISO image with paragon. I boot up the Virtual pc with the disk in and I get to my recovery page. When I am supposed to select an ISO image? My Virtual PC doesn't acknowledge any of my physical hard drives on my host PC. I've also tried copy/paste the files into my datastore and they do not show up. I've tried the option during the set up to start with the ISO but again I am not able to browse to my external hard drive that I have stored the ISO on. VMWare will acknowledge it and say that it is connected but I can't browse to it. Am I doing something wrong? I created the back up disk and ISO image on the external with paragon.

    Read the article

  • Help understanding my hard drive / partitioning situation... Pictures Included! :)

    - by xopenex
    So I have installed windows 7, and two different distros of linux... I have read and tried to understand things like "spanned" "extended" "primary" "swap" "dev/dev2/" "GRUB" "Windows Boot Loader/Manager" etc.... I have a very very limited understanding of all of it! :) I am trying to figure out how to get all OS boot options on one Boot manager (I'm thinking it will be GRUB), because at this point when i turn on my computer, I basically get two booting options (excluding the memtest options etc)... One options is to boot one of my Linux Distros and the second option is to boot my Windows 7. When i go with the first option, Linux boots up... when i go with the second Windows 7 option, I get the "windows boot manager screen" and I can choose Windows 7 or my other installation of Linux (Ubuntu)... In addition, I did not have swap partition from my first installation of Linux, I created it during the installation of my second distro... This is a lot of info for me, but I'm guessing that you linux Gurus, pretty much understand what is going on! Hope my question makes sense.. i will try and simplify... Can i get all 3 OS's optioned to boot from one GRUB? Can i get both Linux distros to use one swap file (I have seen this possible in other threads, but because of how my disk is partitioned, i dont know if i can do this) I hope that i dont have to start all over installing one after the other. Ive got some pics that may help understand my hard drive situation! Thanks guys! :) EDIT... i had some pics, but im a new member.. so cant post them... :( here is a description of the pics... incase i can email them or post later. [grub][3] First Screen I come to after turning on computer... "Ubuntu with linux 3.2.6" (highlighted) fires up Linux perfectly... other choice at bottom of list "Windows 7 (loader) (on dev/sda1)... brings me to the next picture below.. windows boot manager [win boot mngr][6] both options here load the os selected [Disk Manager Windows][1] picture of my hard drive situation through windows disk manager utility [gparted][2] picture of my hard drive situation through "gparted" [mycomp][4] picture of my hard drive situation through "my computer" [paragon][5] one last pic of my hard drive situation through the eyes of "paragon"

    Read the article

  • Migrate Windows Server 2008 to a new hard disk

    - by MainMa
    Hi, I have a machine with Windows Server 2008. I want to change the hard disk drive, but keep everything else. I don't have a cd/dvd drive and don't want to buy it. My first idea was to make a byte-to-byte copy of the disk with Paragon Advanced Recovery. The problem is that when I try to boot from a new hard disk, it says that there were hardware changes and that Windows must be repaired, inviting me to insert the installation disk and follow repair instructions. I searched and found that 1:1 copy is not a correct way to do things. The correct one is to restore Windows to a new hard disk from a full system backup. But to restore, I need to have a dvd drive. I tried to make a copy of the Windows Server 2008 .iso on an USB flash drive, but the drive is not bootable (while the same procedure applied to Paragon Advanced Recovery ISO produces a bootable recovery USB flash drive). Now what else can I do (except buying a dvd drive)? Is there a way either to make Windows work without doing recovery or recover Windows 2008 without using a cd drive?

    Read the article

  • NTFS on the mac - worth paying for?

    - by Console
    I currently use ntfs-3g on my mac to be able to write to NTFS-formatted drives. I have seen two commercial alternatives that boast better performance and more advanced features - Tuxera (a commercial version of ntfs-3g it seems) and Paragon. Are these products really better? Any experiences, hard facts, benchmarks from real-world use?

    Read the article

  • Windows no longer boots on dual-boot system

    - by N Alex
    While trying to delete an Ubuntu partition from my hdd I accidentally rebooted my computer. (Note: the partition was originally made from an existing partition using paragon.) After that when I tried to start the computer I got the GRUB rescue terminal prompt. I wasn't able to do much from that, but I did manage to boot Ubuntu from a USB drive and to run boot-repair. But now when I try to select Windows 7 from the boot selection menu I get the error 0xc0000225. Here is the link to the BootInfo summary created by boot-repair: http://paste.ubuntu.com/1032584/ I have a lot of very important data on my hdd and I would really appreciate your help.

    Read the article

  • Error 15 after manually installing Ubuntu 12.04 dualboot windows 7

    - by indraisme
    (this post contains as the same as my preceding post on Grub rescue problem after installing Ubuntu 12.04 LTS since I've post it on the wrong place) Thanks God I found this page. I'm a newby from Indonesia, and I have a laptop with 2 OSes (7 and Precise) installed. I have installed Ubuntu 12.04 manually by replacing Blankon 4.0's (an Ubuntu-based Indonesian distro) partition. I made /boot mountpoint and then chose it as the place for bootloading. As the result, I've been experiencing error 15 until now, and I have to boot my laptop from Paragon rescue kit every time I want to use it. Is there any way to solve the problem? Terima kasih (Thanks)

    Read the article

  • partitioning problems

    - by Remus Rigo
    I had on my laptop a dual system (Ubuntu 11.04 and Windows 7) and someway the partitions messed-up. Windows stopped from booting, I just got a blinking cursor, but Ubuntu worked fine. I tried to fix the windows boot (fixmbr, fixboot, bootsect /nt60 C:/....) but now grub was overwritten and I have no OS. Finally I formatted the hdd (low format), installed Windows, partition hdd with paragon partition manager and now I want to install Ubuntu, but Ubuntu sees an empty hdd, weird, can anyone tell me what can I do? EDIT: I have created: partition 1: 100MB ntfs - windows reserved (drive B) partition 2: 50GB ntfs win 7 (drive C) partition 3: 50GB ext3 linux partition 4: 'the rest' ntfs for data (drive E) (the swap i will create after)

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • DVD ROM not working only in windows?

    - by Behrooz A
    I have an Asus N53SV laptop, My DVD rom doesn't read any type of DVD in windows , but I just installed windows 7 from a bootable DVD , I think this problem occurred after I tried to change my partitioning with paragon partition magic , I was trying to shrink , join and so , after that my windows showed an error that windows cannot find [weird address] on hard disk every time on starts. windows itself says the DVD drive works correctly and driver is working properly, but no DVD or CD can be read , note that the DVD I'm trying to read is the same DVD which I used to install windows some minutes ago. I don't know what's the problem

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • How to set up a PC which can be booted from Linux AND Windows?

    - by Martin
    Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

    Read the article

  • Partition table damaged

    - by emaster70
    Hello, I'm currently in a terrible situation with my hdd: I was trying to install an OS side by side with my windows 7 x64 and I used the Paragon Partition Manager feature made for that. It disabled/hid/(damaged?) one of my partitions and now I can no longer access it. The partition, unfortunately, contains data I need to access urgently and I've got no backup. To complicate things even further I don't have another PC (I'm writing this msg from my iphone) and all I can rely on is a backtrac 4 disk (wkn't connect to my wifi, gets stuck obtaining IP address) and. Windows 7 x64 disk. Booting into windows fails with the pc hanging on the starting windows screen. Safe mode won't work either. Is there anything I can do? Here's the layout of the disk: Recovery partition Win partition Unallocated space (it's supposed to be my data partition) Other os partition (don't care about that, the installation of the other OS failed) Please help me, I'm desperate.

    Read the article

  • Can SysPrep (or anything else) be used to make a Win XP partition from another computer bootable?

    - by chris5gd
    I've used Paragon Backup and Recovery Free as recommended to me in my other question, to backup my C: (Win XP) and D: (installed apps) partitions. Before taking the rather scary step of breaking the RAID 0 array on which it's currently installed, and restoring to one of the individual drives, I'd quite like to test the restorability of the imaged partitions. I've restored them on to a spare disk in another computer, which of course won't boot from them in their current state. Is it possible to use SysPrep (or another tool) on the restored partitions, to make it bootable?

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • Warm Reception By Partners at EMEA Manageability Forum

    - by Get_Specialized!
    For the EMEA Partners that were able to attend the event in Istanbul Turkey, thank you for your attendance and feedback at the event. As you can see, the weather kept most of inside during the event and at times there was even some snow.  And while it may have been chilly outside, there was a warm reception from Partners who traveled from all over EMEA to hear from other Oracle Specialized Partners and subject matter experts about the opportunities and benefits of Oracle Enterprise Manager and Exadata Specialization. Here you can see David Robo, Oracle Technology Director for Manageability kicking off the event followed later by Patrick Rood, Oracle Indirect Manageability Business. A special thank you to all the Partner speakers including Ron Tolido, VP and CTO of Application Services Continental Europe Capgemini, who delivered a very innovative keynote where many in attendance learned that Black Swans do exist. And while at break, interactivity among partners continued and it was great to see such innovative partners who had listed their achieved specializations on their business cards. Here we can see Oracle Enterprise Manager customer, Turkish Oracle User Group board member and Blogger Gokhan Atil sharing his product experiences with others attending. Additionally, Christian Trieb of Paragon Data, also shared with other Partners what the German Oracle User Group (DOAG) was doing around manageability and invitation to submit papers for their next event. Here we can see at one of the breaks, one of the event organizers Javier Puerta (left), Oracle Director of Partner Programs, joined by Sebastiaan Vingerhoed (middle), Oracle EE & CIS Manager Manageability and speaker on Managing the Application Lifecycle, Julian Dontcheff (right), Global Head of Database Management at Accenture. Below is Julian Dontcheff's delivering his partner presentation on Exadata and Lifecycle Management. Just after his plane landed and 1 hour Turkish taxi experience to the event location, Julian still took the time to sit down with me and provide some extra insights on his experiences of managing the enterprise infrastructure with Oracle Enterprise Manager. Below is one of the Oracle Enterprise Management Product Management Team,  Mark McGill, Oracle Principal Product Manager, presenting to Partners on how you can perform Chargeback and Metering with Oracle Enterprise Manager 12c Cloud Control. Overall, it was a great event and an extra thank you to those OPN Specialized Partners who presented, to the Partners that attended, and to those Oracle team members who organized the event and presented.

    Read the article

1 2  | Next Page >