Search Results

Search found 10798 results on 432 pages for 'port scanning'.

Page 1/432 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Network vulnerability and port scanning services

    - by DigitalRoss
    I'm setting up a periodic port scan and vulnerability scan for a medium-sized network implementing a customer-facing web application. The hosts run CentOS 5.4. I've used tools like Nmap and OpenVAS, but our firewall rules have special cases for connections originating from our own facilities and servers, so really the scan should be done from the outside. Rather than set up a VPS or EC2 server and configuring it with various tools, it seems like this could just be contracted out to a port and vulnerability scanning service. If they do it professionally they may be more up to date than something I set up and let run for a year... Any recommendations or experience doing this?

    Read the article

  • Port forward to different port number

    - by ThatGuyYouKnow
    I have a router that sets up rules like so: TCP Any -> 5800 Any -> 5900 UDP Any -> 5800 Any -> 5900 Computer: ip-address This would allow someone 'outside' to connect to my router's port 5800 and 5900 and forward that to the same port on my computer. My issue is that I want the 'outside' port to be different without changing the port on my computer.

    Read the article

  • Rerouting traffic from port 80 to another port on a single ip

    - by zam
    I have a server with multiple IP addresses associated with it. I'm trying to run a node.js web server (which I do not want to run as root), using only one of those ip addresses (it would be very bad if the traffic from all the ip addresses were forwarded). Through searching superuser, it looked like this could be possible with iptables: How to setting up iptables for traffic fowarding on port 80 from specific sources iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 --source 212.333.111.222 -j REDIRECT --to-port 9020 However, I do not understand why eth0 is needed. According to: http://blog.softlayer.com/2011/iptables-tips-and-tricks-port-redirection/ this could be done with: iptables -t nat -A PREROUTING -p tcp --dport 2525 -j REDIRECT --to-ports 25 What is the correct way of forwarding traffic from a single ip on port 80, lets say 111.111.111.111:80 to another port on the same server, lets say 111.111.111.111:8765? thanks for your help!

    Read the article

  • Simple options for port forwarding to a different port?

    - by Nick
    I have three network printers at our local office, all of which listen on port 9100. Non of them offer the option of changing the listening port. We have a single public static IP address, and access to our main network is through a Linksys WRT-54G. We need to be able to print to these printers from outside the office. The problem is, with the 54G, I can only forward a port to the SAME port on a particular IP address. What I really need though is a way to forward to an ip address and a DIFFERENT port. I need to do this: In port Destination 9100 192.168.1.1 : 9100 9101 192.168.1.2 : 9100 9102 192.168.1.3 : 9100 So I'm looking for options. I could setup an old computer with two network cards and IPtables I suppose, but that seems like a lot of overhead for something relatively simple. Is there a way a virtual machine (read: one network card) could do the advanced port forwarding? Where I forward all traffic to it, and it forwards it on to the right printer? Or what about those mini Linux distros that replace the WRT-54G's firmware? Do any of those support what I need "out of the box"? I have a spare WRT- could I make it an IP tables router? Recommendations for mini distros? Or is there an off-the-shelf product that does this (cheap/local preferred)? Any advice / options appreciated. Thanks!

    Read the article

  • Port forwarding to asp.net development server

    - by ile
    I have configured my router so that I can access my localhost from internet. But I can't manage to port forward it to asp.net development server. In router's port forwarding I did the same thing as for the localhost but only changed port number so that it is the same as the one that is assigned to my application, but this doesn't work. Any idea how to get it work? Thanks in advance, Ile

    Read the article

  • How to run node.js app on port 80? Are processes blocking my port?

    - by Lucas
    I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

    Read the article

  • Port Forwarding a Specific Port (e.g. 22)

    - by Jerry Blair
    I'm still confused about establishing an SSH connection (port 22) between two computers on different internal networks. For example: I am on my computer with internal IP address IIP-1, connected to my router RT-1. There are 10 IIPs connected to RT-1. I want to establish an SSH connection to IIP-3 which is connected to router RT-2. There are 10 IIPs connected to RT-2. At any time, there can be multiple SSH connections between IIPs on RT-1 and RT-2. Since I only have port 22 available, I don't know which SSH session is talking between which IIPs. I looked at a couple of similar questions but am still unclear on the solution. Thanks much, Jerry

    Read the article

  • Redirecting a port to a remote server on windows

    - by Chris T
    I only have command line access to a server and I'm not allowed to disable the antivirus (which blocks netcat). What I would like to do is have a program that listens on port A and when a remote computer connects to it redirect all input/output of that socket to another server on a different port. Basically a small proxy. Is there anything that will let me do this from command line? If not I could try coding something simple that does this with C++

    Read the article

  • port forwarding with VirtualBox

    - by Argh
    I have a virtualbox VM running ubuntu. The Ubuntu guest is running a web server which listens on port 3000 (http://127.0.0.1:3000) The host machine is windows vista. I have configured port forwarding using VBoxManage. If I query the config using VboxManage getextradata "MyMachine", I get Key: GUI/AutoresizeGuest, Value: on Key: GUI/Fullscreen, Value: off Key: GUI/LastCloseAction, Value: shutdown Key: GUI/LastWindowPostion, Value: 9,34,640,529,max Key: GUI/MiniToolBarAlignment, Value: bottom Key: GUI/MiniToolBarAutoHide, Value: off Key: GUI/SaveMountedAtRuntime, Value: yes Key: GUI/Seamless, Value: off Key: GUI/ShowMiniToolBar, Value: yes Key: VBoxInternal/Devices/pcnet/0/LUN#0/Config/guesthttp/GuestPort, Value: 3000 Key: VBoxInternal/Devices/pcnet/0/LUN#0/Config/guesthttp/HostPort, Value: 3000 Key: VBoxInternal/Devices/pcnet/0/LUN#0/Config/guesthttp/Protocol, Value: TCP This looks like it should work... However when I try to access the web server from the host machine (windows box) I dont get a response. I ran a netstat on the windows box and nothing appears to be listening on port 3000 which explains why forwrding isnt working. Note that I have already tested with my firewall switched off... The version of VirtualBox I am using is 3.1.4 Any ideas?

    Read the article

  • Redirect packages directed to port 5000 to another port

    - by tdc
    I'm trying to use eboard to connect to the FICS servers (http://www.freechess.org), but it fails because port 5000 is blocked (company firewall). However, I can connect to the server through the telnet port (23): telnet freechess.org 23 (succeeds) telnet freechess.org 5000 (fails) Unfortunately the port number is hardcoded (see here: http://ubuntuforums.org/archive/index.php/t-1613075.html). I'd rather not have to hack the source code as the author of that thread ended up doing. Can I just forward the port on my local machine using iptables? I tried: sudo iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 5000 -j REDIRECT --to-port 23 and sudo iptables -t nat -I OUTPUT --src 0/0 -p tcp --dport 5000 -j REDIRECT --to-ports 23 but these didn't work... Note that: $ sudo iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:5000 redir ports 23 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:5000 redir ports 23 Chain POSTROUTING (policy ACCEPT) target prot opt source destination

    Read the article

  • Change the Integrated Weblogic Port number

    - by pavan.pvj
    There came a situation where I wanted to work with two JDevelopers simultaneously and start two different applications in two JDEVs. (Both of them have to in separate installation location, else it will create a problem because of system directory).Now, when we want to start WLS in JDEV, only the first one will be started and the other one fails with an exception of port conflict. Until few days back, $1million dollar question was how to change the integrated WLS port number?So, heres the answer after some R&D. In the view menu, click on "Application Server Navigator". Right click on Integrated Weblogic server.1) If it is the first time that you are trying to start the server, then there is a menu "Create Default Domain". If you click on this, a window will be displayed where it asks for the preferred port number. Change it here.2) If the domain is already created, then click on Properties and change the preferred port number.Again, if you want to change the port before starting JDEV from the file system, then goto $JDEV_USER_HOME/systemxxx/o.j2ee and open the file adrs-instances.xml and change the http-port in the startup-preferences:<hash n="startup-preferences">   <value n="http-port" v="7111"/></hash>Note 1: adrs-instances.xml will be created ONLY after you create the default domain.Note 2: systemxxx - refers to system.<JDEV version> like system.11.1.1.3.56.59 for PS2.Note 3: $JDEV_USER_HOME - in windows - would be C:\Documents and Settings\[user_name]\Application Data\JDeveloper"Now, you can run multiple Integrated WLS simultaneously. But please be aware that running more than one WLS server will degrade system performance.

    Read the article

  • Cisco 800 series won't forward port

    - by sam
    Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

    Read the article

  • "port forwarding": redirect calls to webservice at port 8081 to port 80

    - by niba
    Hi, a colleague of mine wrote a webservice that runs on port 8081 of our Windows 2008 Server. He uses the class ServiceHost, afaik this means its a standalone host (no IIS or ASP involvement). Note: I'm new into WCF ;) Now there are some issues with clients behind a firewall blocking the requests to remote port 8081 of our server (where the webservice runs). The easiest solution would be: run the webservice host at port 80 ... But: there is also a Apache 2.2 webserver running on the Windows Server, hosting some websites. By default it runs on port 80. My solution after some researching: use a virtual host to route requests to a virtual host (lets say http://webservice.[hostname]:80) to the webservice host (http://[hostname]:8081). Is this a good idea? Can Apache handle forwards to standalone webservice hosts? It would be nice if someone could lead me on to the right track :) Best regards, Niels

    Read the article

  • Opening port 80 in router has no results

    - by Ricardo Pieper
    A friend of mine has a ADSL modem and I need to forward some ports. I have already forwarded the 1521 port (Oracle) and it's working fine. Now I need to forward the port 80. I already set up his IIS bindings to this port, and also forwarded the port like this video shows: https://www.youtube.com/watch?v=DLKD-fyexoo So I think I did everything correctly. The local IP address is also the same as the machine where the IIS server is running. I'm sorry, but I can't post images since i don't have 10 points :( Somehow I can't forward this port, yougetsignal.com keeps saying that the door is closed. When I try to open the port, the Control Panel says me that I have to access the control panel in the 8080 port, because the 80 port will be open. Ok, that's fine. But I'm still able to access it in the 80 port, and when I try to access it in the 8080 port, it doesn't work. I'm trying it with the TPLINK 8816, but I also tried to open it in the Opticom DsLink 279, and it didn't worked (using another machine), I got the exact same results. He has a dynamic IP address, but he is also using No-ip, so I can always access his Oracle database in a certain static address. The 1521 port is open. I also tried to disable the firewall in Windows, but that makes no sense to me, since the router doesn't really open the port 80. Clearly I'm missing something. I have never done it in my life, so I dont know how to proceed. Restarting the router was the first I did, no results. I'm accessing his laptop through TeamViewer, so I'm testing the port outside his local network. Edit: My ISP says that they allow to open ports, and the 1521 port is opened. What could I do to open the 80 port?

    Read the article

  • Web Interfaces not opening even after Port Forwarding is said to be working!

    - by Ahmad
    I'm encountering this strange problem which has baffled me to the ground, and which I haven't encountered even after years of doing port forwarding .. ! I am hoping somebody here can help me solve this mystery .. :) My network configuration is as follows: I have a DSL modem (custom made and branded by my ISP) which is receiving a DSL stream ... it has an external IP which is visible to the world, say, 11.22.33.44 ... This modem has DHCP enabled, has an internal IP for itself, which is 192.168.1.1 .. it is connected to 2 laptops via and ethernet cable .. Laptop 1 has IP 192.168.1.2, and Laptop 2 has IP 192.168.1.3 ... On Laptop 1, two applications are running, jDownloader and Media Player Classic, which have their web interfaces on ports 8765 and 13579, respectively ... I can access both of these web interfaces from Laptop 2 by opening these addresses: 192.1681.2:8765 and 192.168.1.2:13579 ... both of their web interfaces open up, meaning the web interfaces are working fine .. Moving on, I now want to access these web interfaces from outside my network as well, and so I've configured port forwarding in my PTCL modem to forward all traffic on ports between 8000 and 14000 (both TCP and UDP) to IP 192.168.1.2 ... I have verified that port forwarding is working by testing it using PortForward.com's port checker tool, and this website too: [URL]http://www.yougetsignal.com/tools/open-ports/[/URL] When I use the website, if I'm running the applications on Laptop 2, the website reports that the port is open .. if I then close the application, the website reports the port is closed ... This makes sense as nothing is listening on my machine in the latter case .. Also, if I disable port forwarding in my modem, again, the website reports the port is closed ... so, the website's results seem to be okay ... Same of the above can be said when I'm used PortForward.com's port checker tool ... So again, everything okay so far ... Now, here comes the problem !! ... Despite the above tools reporting that port forwarding is working, I am unable to open the web interfaces from outside my network ... So for example, if I tried to browse 11.22.33.44:8765 or 11.22.33.44:13579, nothing opens in my browser ... But if I accessed these web server's locally from Laptop 3, by typing in 192.168.1.2:8765 or 192.168.1.2:13579, they opened ... So where is the problem here ?? The tools report unanimously that port forwarding is working, and yet I am unable to open the web interfaces from outside the network .. Also note that I have disabled the firewall from my computer, and have also made sure that any option in the above programs (whose web interfaces I am trying to open) that says only local connections are to be accepted, is disabled ... So whats the problem ... ?!! Any ideas ??

    Read the article

  • Reading a Serial Port - Ignore portion of data written to serial port for certain time

    - by farmerjoe
    I would like to read data coming and Arduino on a serial port on intervals. So essentially something like Take a reading Wait Take a reading Wait Take ... etc. The problem I am facing is that the port will buffer its information so as soon as I call a wait function the data on the serial port will start buffering. Once the wait function finishes I try and read the data again but I am reading from the beginning of the buffer and the data is not current anymore, but instead is the reading taken at roughly the time the wait function began. My question is whether there is a way that I am unaware of to ignore the portion of data read in during that wait period and only read what is currently being delivered on the serial port? I have this something analogous to this so far: import serial s = serial.Serial(path_to_my_serial_port,9600) while True: print s.readline() time.sleep(.5) For explanation purposes I have the Arduino outputting the time since it began its loop. By the python code, the time of each call should be a half second apart. By the serial output the time is incrementing in less than a millisecond. These values do not change regardless of the sleep timing. Sample output: 504 504 504 504 505 505 505 ... As an idea of my end goal, I would like to measure the value of the port, wait a time delay, see what the value is then, wait again, see what the value is then, wait again. I am currently using Python for this but am open to other languages.

    Read the article

  • problem getting scanning to work on epson workforce 610

    - by thatisvaliant
    i installed the latest epson software on my user's computer. everything works fine from the admin account (printing / scanning). yet, when i go to user's account (the standard user mode account the company employee uses on there machine) and launch the epson scan software or scan settings software it times out and puts up a dialog box asking me if i want to use the trouble assistant. my question is why would this all work in the admin account yet not work in the user mode account? any help is greatly appreciated.

    Read the article

  • HP Officejet 7410 AIO: Scanning/copying output is a solid black field

    - by William
    I recently tried to breathe some life back into an old Officejet 7410 for my parents. The printing is fine, but the scanning and the copying respectively produce images and copies that are mostly solid black, except for the first inch or so from the top of the original page. At first I thought this was a bulb problem, so I replaced it. Unfortunately, the problematic behavior is still there. I've tried resetting to factory defaults. Still no improvement. I don't think this is related to my OS or drivers, since the copying is also affected even when the connected computer is powered off. So... my question(s): What is the cause of this bad behavior? Given that, can my Officejet be repaired? If so, how? Thanks in advance.

    Read the article

  • Issues printing through ssh tunnel and port forwarding

    - by simogasp
    I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

    Read the article

  • Third Monitor (Mini Display Port, Display Port)

    - by muhsing
    I have got a Hd 6950(2x minidisplay port 2x DVI port 1x HDMI port) graphic cards. And I have got a three monitor. I want to active it all. I learned to need an active minidisplay port to vga or minidisplay port to dvi cable. Here's my problem. I want to buy minidisplay port to dvi but my country doesn't have it but I can find display port to active dvi cable. I have a minidisplay port to display port cable. If I buy Sapphire ACTIVE DP TO SL-DVI CABLE will my third monitor work? I mean I will plug mini display port to display port cable first and after I will plug active dp to dvi cable. Will it work? If someone help me I will be very grateful. I have this And I will buy this After this processing Will my third monitor work with eyefinity? Sorry for my English. I hope you will understand me. Take care.

    Read the article

  • Changing permissions on serial port

    - by Terrik
    I'm using the Arduino IDE in Ubuntu, and am having issues with the serial port. It has worked in the past, but for reasons that may be unnecesary, I felt the need to change the ownership of some of the files from root ownership to my users ownership. This made the IDE work correctly, but I lost the ability to use the correct serial port. In the dev folder, the port I need is listed as permission 166. Someone (who is no longer in the area to help me) swapped the permissions to 666, which made it all work gloriously. However, it reverted back as soon as I restarted my computer, and if I now try to use the command: sudo chmod 666 ttyACM0 nothing happens. No error messages, but no permission change either. How can I change it, and how can I get it to change permanently. I apologize if this question is overly simplistic or unclear, I'm an ubuntu noob, and I wouldn't begrudge feedback!

    Read the article

  • IP/PORT forward requests to another server

    - by DT.DTDG
    I have the following listening PORT:IP set up on my UBuntu server. 12.345.67.890:3636 It receives requests perfectly, however, I would now like to forward any requests to that IP:PORT to another IP:PORT, i.e.: 09.876.54.321:3636 Essentially I want to do a request forward 12.345.67.890:3636 -> 09.876.54.321:3636. How can I go about it in Terminal and if I wanted to change it back how can I go about that too? Is there also a way to test that the data is forwarding and it is setup properly? Thanks! Edit: Can I just do as follows, just wondering how I would go about testing it and how I could disable it? sysctl net.ipv4.ip_forward=1 iptables -t nat -A PREROUTING -p tcp --dport 3636 -j DNAT --to-destination 09.876.54.321:3636 iptables -t nat -A POSTROUTING -j MASQUERADE

    Read the article

  • Sms via a nokia phone over a serial port

    - by abigblackman
    Hi, I'm trying to send a sms via a Nokia phone over serial which is easy enough via putty. The commands from the nokia documentation works fine. However, trying to send the same commands from a c# application fails miserably. I've run Sysinternals PortMon and can see the commands come through OK, the only difference I can see is in the way it connects but I am having trouble finding the commands that would iron out those differences. The code I'm running looks a little bit like this using (SerialPort port = new SerialPort(comPort, 9600, Parity.None, 8, StopBits.One)) { port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.ErrorReceived += new SerialErrorReceivedEventHandler(port_ErrorReceived); //port.ReceivedBytesThreshold = 1; port.DtrEnable = true; port.RtsEnable = true; port.ReadTimeout = 1; port.Handshake = Handshake.XOnXOff; try { port.Open(); port.WriteLine("AT"); port.WriteLine("AT+CMGF=1"); port.WriteLine("AT+CMGS=\"" + number + "\""); port.WriteLine(message); port.Write(new byte[] { (byte)26 }, 0, 1); } finally { if (port.IsOpen) { port.Close(); } } The differences I'm seeing in the trace from the serial port are At the start 0.00001844 aspnet_wp.exe IOCTL_SERIAL_SET_HANDFLOW USBSER001 SUCCESS Shake:1 Replace:43 XonLimit:4096 XoffLimit:4096 And at the very end 0.00061153 aspnet_wp.exe IOCTL_SERIAL_PURGE USBSER001 SUCCESS Purge: RXABORT RXCLEAR 0.00004442 aspnet_wp.exe IOCTL_SERIAL_PURGE USBSER001 SUCCESS Purge: TXABORT TXCLEAR Has anyone got any tips on how to iron out these issues? I also notice that the phone is not responding back to the application with any acknowledgement when I issue a command so I suspect the problem is with the connection, not those messages at the end.

    Read the article

  • Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

    - by dannote
    I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

    Read the article

  • Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

    - by dannote
    I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >