Search Results

Search found 5852 results on 235 pages for 'ram kumar sharma'.

Page 1/235 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Does seeding torrents affect the harddisk RAM caching?

    - by satuon
    I've downloaded a lot of torrent files and while I'm seeding them, I've noticed that very often when I start the browser it's slow and the hard disk activity indicator is on. Usually when I start a program it gets cached in RAM and starting it again is very quick, and I have 3 GB of RAM so usually it stays cached nearly forever. But when my torrent client is seeding it seems that after an hour programs that I ran are no longer cached in RAM. I was thinking maybe it's because of the disk reads which the torrent client performs are cached and fill up RAM eventually. But I don't think they need to be, as they are read only once and are unlikely to be read again soon. So my questions are - is this the way I think, and if so is it possible in principle to prevent the disk reads from being cached? I can try to edit the source code of the program.

    Read the article

  • How to allocate more ram to minecraft?

    - by harikrishnan
    Minecraft lags badly in my linux than windows! in windows i dont find trouble playing it! My system specs : processor : AMD Athlon x2 260 3.2ghz dual core Graphic card : Ati radeon 3000 series ram : 4gb (3.25 usable) I have ubuntu 12.04 and I want allocate more ram to minecraft! I have 4gb physical ram (ONLY 3.25 USABLE) I have openjdk 7 ALSO TELL ME OTHER WAYS TO RUN MINECRAFT SMOOTHLY! PLEASE HELP!!!!!!!!!!!!

    Read the article

  • RAM caching causes severe performance drops

    - by B T
    I have read plenty of threads on memory caching and the standard response of "large cache is good, it shouldn't effect performance", "the kernel knows best". I have recently upgraded from 12.04 to 12.10 and changed from VirtualBox to VMware Workstation and the performance differences are severe (I suspect it is because of the latter). When I am running my virtual machine the system load monitor graph shows less than 50% memory usage generally. System load indicator is showing me that the rest of my RAM is used in the cache all the time. Plain and simple this is the comparison: BEFORE Cache was very sparingly used, pretty much none of my memory usage was the cache Swappiness was 0 (caused my memory to be used first, then swap only if needed) Performance was quite good and logical RAM was used fully first, caching was minimal. I could run enough software to utilize my full 4GB of RAM without any performance degradation whatsoever Swap space was then used as needed which was obviously slower (I am on a HDD) but was still usable when the current program was loaded into memory AFTER Cache is used to fill the full 4GB as soon as my virtual machine is run Swappiness is 0 (same behaviour as before but cache uses full memory straight away) Performance is terrible and unusable while running Ubuntu software Basic things like changing windows takes 2 minutes + Changing screens happens frame by frame over sometimes up to 5 minutes Cannot run an IDE and VM like I could with ease before So basically, any suggestions on how to take my performance back to how it was before while keeping my current setup? My suspicion is VMWare is the problem, but how do I see what is tied to the use of the cache? Surely there is a way to control this behaviour in software as polished as VMware? Thanks EDIT: Could also be important to note that the behaviour differs depending on whether VMware is open or closed. If VMware is open, then the ram will lock at like 50% and 50% cache and go into the complete lock up mentioned above. Contrastingly, if VMware is closed (after being open), then the RAM will continue to rise as it needs / cache will stay as the complete remaining memory and there is no noticeable performance degradation.

    Read the article

  • 64 bit Ubuntu sees half my RAM

    - by koehn
    This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

    Read the article

  • Let the RAM improves performance

    - by user1717079
    I have a low profile machine but with a lot of fast RAM, 4 Gb, which is really an amount of memory that i probably will never use, not even an half, since i just use this machine for coding and browsing the web. The HDD is really slow and so the overall performance are bad when booting, caching or starting new program, I'm wondering if Ubuntu can provide some setting or utility to solve this situation and let my system rely more on the RAM usage.

    Read the article

  • Need more RAM?? Running VMmachine + ubuntu

    - by JBizzle
    So I looked but im running ubuntu in vm machine and its running at a snails pace and I installed the 64bit ver. Running windows 7 64bit the down side is that I only have 2GB of ram installed.....bummer huh I know the answer is im going to need more ram I just want to confirm... Or is there an tip that I can do change some settings to make it run faster in VM? I just want verification on what steps I can take if any to speed things up? Thanks Experts!

    Read the article

  • Using usbdrive as ram in ubuntu

    - by tachyons
    In windows it is possible to use usb flash drive as a virtual ram. I wonder if it is possible to do so in ubuntu? If it is, how could one do it? [Edit]: I mean Ready boost equivallent for ubuntu. I know that it is not a perfect replacement for ram and it is not advisable for longterm use. Is creating swap file in a usb flash drive similar to it? Will it demonstrate performance gains over a swap file in a Hard Disk Drive?

    Read the article

  • SQLAuthority News – Reliving TechEd with Vinod Kumar at Bangalore User Groups

    - by pinaldave
    TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Here is my blog post reviewing the event SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos. For me this is family event – I get to meet my friends who are dear as my family. I like to call User Groups as family too. Family shares life’s personal happiness and experience – the same way User Group shares professional experiences and quite often UG members become just like family member. When I learned that follower user group together building up a unique event I was pretty excited to learn who is going to be speaker for the event. BDotNet.in – Bangalore .NET Usergroup BITPro.in – Bangalore ITPro Usergroup It was indeed joy when I learned that presenter will be Vinod Kumar, who is integral part of user groups and hardcore SQL Server enthusiast. Vinod Kumar is going to present on following two sessions which are both focused on internals of the Windows and SQL Server. Understanding Windows with SysInternals Tools – This session will cover various tools from usage of Memory, x86 architecture, x64, WOW mode, Page faults, Virtual Memory mapping, OOM scenario, Perf Tool, PAL tool, Logman and more. Peeling the Onion: SQL Server Internals Demystified – This session will cover advanced disk formats, SQL Server 2012 security changes, memory changes, indirect checkPoint and more. I am very excited as this time I will get opportunity to sit in front rows (as I will be reaching there to get best possible position) and learn. I am looking forward to the event and I hope you will join us as well. Event Details: Date: Saturday, April 7, 2012 (10:30am until 1:30pm) Venue: Microsoft, Domlur, Bangalore. Event Details: https://www.facebook.com/events/139444029517882/ This session is FREE for all and everybody and anybody can walk in. Community Blog Posts Here are few of the blog post written by the community on this subject. Vinod Kumar on Reliving #TechEdIn at Blr UG Manas Dash on Reliving TechEd India 2012 with Vinod Kumar Sudeepta Ganguly on SysInternals n SQLInternals with Vinod Kumar Lohith Re Live TechEd India 2012 with Vinod Kumar  Reference: Pinal Dave (http://blog.sqlauthority.com) http://www.youtube.com/watch?v=oRw-p4mahLU Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology, Video

    Read the article

  • RAM Cache always full

    - by Tobias
    I have 6GB RAM, i5 2.4GHZ Processor running Ubuntu 11.10. When streaming online or opening several tabs in Chromium I soon have 4GB Memory in the cache. And this makes my Notebook slow. When streaming a video, after a few minutes it really slows down and stumbles/jerks. I partitioned my HD so that I have 8GB swap. What could the problem be? How can I solve this? P.s: initially I had 4gb and recently upgraded to 6GB, but I did not experience a significant change. P.P.S: if I enter "free -g" in the terminal this is the result: total used free shared buffers cached Mem: 5 2 3 0 0 0 -/+ buffers/cache: 1 4 Swap: 8 0 8

    Read the article

  • How to empty swap if there is free RAM?

    - by jfoucher
    When I open a RAM-intensive app (VirtualBox set at 2 Gb RAM), Some swap space is generally used, depending on what else I have open at the time. However, when I quit that last application, the 2 Gb of RAM are freed, but the same swap space use remains. How can I tell ubuntu to stop using that swap and to revert to using the RAM? Thank you Edit : Right now, about 2 hours after having closed VirtualBox, I have 1.6 Gb free RAM and still 770 Mb in swap.

    Read the article

  • Ubuntu 12.04 LTS 32bit does not detect 4Gb ram

    - by David
    I have recently installed 4Gb of ram for an existing 12.04 32bit Ubuntu. It's not being recognised, only 3.2Gb is showing, See: administrator@Root2:~$ free total used free shared buffers cached Mem: 3355256 1251112 2104144 0 48664 391972 -/+ buffers/cache: 810476 2544780 System is PAE capable, See: administrator@Root2:~$ grep --color=always -i PAE /proc/cpuinfo flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts The system us fully patched and tried to run manual PAE upgrade, See: administrator@Root2:~$ sudo apt-get install linux-generic-pae linux-headers-generic-pae [sudo] password for administrator: Reading package lists... Done Building dependency tree Reading state information... Done linux-generic-pae is already the newest version. linux-headers-generic-pae is already the newest version. The following packages were automatically installed and are no longer required: language-pack-zh-hans language-pack-kde-en language-pack-kde-zh-hans language-pack-kde-en-base kde-l10n-engb kde-l10n-zhcn language-pack-zh-hans-base firefox-locale-zh-hans language-pack-kde-zh-hans-base Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I am not sure what else to try to recognise the full physical memory installed other than loading 64bit. Any thoughts? Thanks! output of uname -r administrator@Root2:~$ uname -r 3.2.0-24-generic-pae

    Read the article

  • Officially announced RAM support size doesn't apply to one of twin rigs with just one difference

    - by Deniz
    It'll take a little long to describe my situation but here goes the story : In January 2009 we bought (the OEM parts) two similar systems with just one difference. One of them had a Phenom X4 cpu and the other one (mine) a Phenom X3 cpu. At the beginning we had problems with both systems to power them on whilst having all of their ram slots being full. We decided to install the systems with just 2 slots populated and later try to install the rest of ram sticks. Both systems did succeed to support 3 sticks. We tried many different procedures to make the systems work with their fourth ram slots being populated. We waited for new bios updates and flashed the boards when they were available, we tried different ram sticks with different frequencies etc. One day while we were trying to install the fourth stick, the X4 machine did accept it. The other one did not. The most mind boggling thing was that after one of my trials the X3 system begun to not operate with the third slot populated. Our boards did have AMD 770 chipsets and we even tried to change the board of the X3 machine with another 770 chipset board. Now my questions are : Should we change the cpu ? What is causing the X3 system to not accept the fourth (or now the third) ram stick ? The manufacturers sites do claim that this boards do accept 4 ram sticks (but they only tested them with certain ram brands and models). What are the limitations for maximum ram configurations on motherboards ? Are there some "rules of thumb" except frequency, voltage, chip type considerations for which we did check our parts ? Our boards are : Gigabyte GA-MA770-DS3 Sapphire PC-AM2RX780 - PURE CrossFireX 770

    Read the article

  • Max ram for computer 16GB or 8GB

    - by Laptop memory question
    Manufacturer's specifications for my notebook say memory can be extended from 4GB to 8GB. Whereas, running sudo dmidecode suggests the computer can use 16GB as below: Handle 0x0037, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Which one is correct?

    Read the article

  • High Usage of RAM by wxPython's GUI and need some advice to reduce it

    - by user67024
    I've recently developed a GUI in wxPython for windows platform. It contains a five tabs, 4 of them are just richTextCtrl boxes and the other one has controls for uploading files, buttons, textctrls, a slider etc.. As I was new to GUI development in Python, I used wxFormBuilder to generate some of the code using a good amount of sizers. So, now the problem is that the GUI starts off with a initial memory of around 40MB which is too much for such a simple application (Or so I think) . Also, when the functions handling the functions use huge lists as the program is for debugging large data logs and identifying the problems in'em implying that I can't afford memory for GUI. So, how can I reduce that start working memory size? Is it a general issue in wxPython? And currently trying use profilers but not sure if it's going to help.

    Read the article

  • Relationship between RAM & processor speed

    - by deostroll
    RAM is just used for temporary storage. But since this storage is in the cpu memory (RAM) it is fast. Programs can easily read/write values into it. I've noticed more the RAM less time it takes for the application to load/execute. But doesn't this actually depend of the processor speed (MHz or GHz values). I am wondering what is the science/relationship between processor speed and RAM.

    Read the article

  • What is the difference in RAM speeds?

    - by jasondavis
    I am building a new PC with the intel i7-930 processor. I am wanting to use 12gb of RAM for it (6x2gb sticks). Here is some of the RAM I am looking at G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop 2 of these 3 stick kits. They are rated at 1600 however some of the user reviews on that product say they xcould not get it to run at 1600 and the supplier who makes the RAM made a comment that "I7 doesn't support over DDR3 1066" So I am curious, I do not know much about this, I know the more GB of RAM the better but as for the speeds, I am not sure how much of a difference it makes. So can someone explain to me what the difference in performance may be based on speeds of 1200 vs 1600 ram?

    Read the article

  • 3GB RAM Installed and Detected by BIOS, Windows Vista 32bit Only Sees 2GB

    - by Nathan Taylor
    I am attempting to install more RAM on a Windows Vista 32bit machine which is using a X6DAL-XG motherboard and the RAM amount reported in the BIOS is 3GB+, but Windows is only reporting 2GB installed. The motherboard has 6 RAM bays which I have populated with various combinations of 4 1GB sticks, and 2 512mb sticks, but no matter how I configure them Windows doesn't see more than 2GB. I realize of course 32-bit Windows has a 3gb cap on memory, but that doesn't explain why it will only report 2GB when there are in fact (currently) 5GB installed. I should think I would be able to see at least 3GB. According to the spec list for the motherboard the minimum RAM requirements are DDR333/266mhz installed in pairs. I have done this exactly, and the BIOS isn't reporting any problems at POST. RAM Configuration (according to CPU-Z): Slot #1: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #2: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #3: PQI - 512mb PC2700 (166mhz) Slot #4: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #5: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #6: PQI - 512mb PC2700 (166mhz) I'm not sure if memory specs above conflict with this statement in the motherboard manual or not: Memory Support The X6DAL-XG supports up to 12GB/24GB of registered ECC DDR333/266 (PC2700/PC2100) memory. The motherboard was designed to support 4GB (PC2100) modules in each slot, but only the 2GB modules have been tested. When using registered ECC DDR333 (PC2700) memory, installing four pieces of double-banked memory or six pieces of single-banked memory is supported. So, am I doing something wrong with the RAM I have now, or is there some sort of compatibility problem which I am missing? Thanks!

    Read the article

  • Can I use all my RAM for application data?

    - by gsedej
    Hi! I have yet another question about "where is my Linux memory" Question goes: can I use cache for application data? On my laptop I have 1GB ram. Situation after some time of work: browser takes 400MB and all other apps caa 300MB (quickly summed in system monitor). System monitor says I use 90% of RAM and I have already 200MB on swap. Laptop is getting slower when I start new things (e.g. open new tab in browser or open new Nautilus window). probably putting memory on swap So there should be 1200MB (ram+swap) used but all app I see uses only 600MB. Where are other 600MB? Out of this 600MB there is 400MB real RAM. I am not copying or any other massive IO activity. I read about Linux smartly uses all ram it has using buffers and cache. So, kernel (cache) uses 300MB. What if I don't want to have disk mirrored and I want to use memory for application data (e.g. new browser tab)? I don't need 200MB of mirrored disk data, because I (for example) won't use open the same photos on data partition I just seen. So can I use all my RAM for application data? (including browser, desktop, xorg, other services). How?

    Read the article

  • Transfer used ram to swap and free more physical ram

    - by AbuOmar
    I have a vps with 256m physical ram and 512m swap space, I am trying to use a software that need more than 256m and less than 512m ram, so it uses swap. The problem is at some moment of the installation, the installation process checks the available physical ram, it's full (some swap is used), so it pauses the installation and tills that it must be some more ram to continue the installation.. I see that I need to move some of used physical ram to swap while the process is running.. Is there anyway I can do that? or any other solution! For sorry I am using openvz vps, and the vm.swappiness option can't be modified as a solution.

    Read the article

  • Dell Poweredge 2650 RAM Upgrade

    - by Vik
    Hi, I bought an old Dell Poweredge 2650 off ebay to use as a dev server, but I need to get more RAM for it. From what I understand there were 2 versions of the 2650 released, with the older version only supporting PC1600 RAM (200MHz) and the 2nd version supporting PC2400. Unfortunately Dell thought it wasn't necessary to label their servers as such so I can't tell what version I have. Does anyone know if there is a way to tell without buying and testing RAM in the server?

    Read the article

  • Monitoring physical RAM errors on Linux

    - by user40157
    I would like to monitor the ram of two linux systems (Ubuntu and Red Hat). I realize I can run memtest86 from boot to diagnose bad ram. But are there are any solutions to monitor ram while the system is still running. I'm sort of thinking a daemon that writes and reads back from random unused memory. Anybody seen something like this before?

    Read the article

  • Developer's PC - worth getting more than 8GB RAM?

    - by Borek
    I'm building a developer PC and am wondering whether to get 8GB or 12GB. It's a Core-i7 860 system, i.e., 1156 motherboards with 4 slots for RAM sticks, dual channel, usually up 16GB (as opposed to 1366 sockets where 6 banks / triple-channel are used). 8GB would be cheaper to get especially because price per GB is lower with 4x2GB compared to 2x4GB. Also the availability is worse for 4GB DIMMs here where I live; those are the main practical advantages of 8GB. (Edit: I should have stressed the price difference more - in the eshop I'm buying from, the difference between 12GB and 8GB is so big that I could almost buy a whole new netbook for it.) However, I understand that more RAM can never do harm which is the point of this question - how much of a difference will 12GB make as opposed to 8GB? Honestly, I've always been on 3.2GB systems (4GB but 32bit system) and never felt much pain from having too little memory - of course there could be more but for instance compiler's performance was usually held back by slow I/O or not utilizing multiple cores on my CPU. Still, I'm not questioning that 8GB will be useful, however, I'm not sure about the additional 4GB difference between 8 and 12 gig. Anyone has experience with 8GB / 12GB systems? The software I usually run all the time: Visual Studio or Eclipse (both should be fine with ~2GB RAM, after that I feel their performance is I/O bound) Firefox (it can never have enough RAM can it? :) Office (~500MB RAM should be enough) ... and then some smaller apps like Skype, other browsers, some background services etc.

    Read the article

  • ram monitoring on linux

    - by user40157
    I would like to monitor the ram of two linux systems (Ubuntu and Red Hat). I realize I can run memtest86 from boot to diagnose bad ram. But are there are any solutions to monitor ram while the system is still running. I'm sort of thinking a daemon that writes and reads back from random unused memory. Anybody seen something like this before?

    Read the article

  • RAM modules compadibility

    - by teejmya
    My current laptop has 3GB (1x2GB, 1x1GB) of DDR2 RAM installed, and they run at 667MHz. I just ordered a new laptop, that comes with 2GB (2x1GB) of DDR3 RAM that runs at 1066MHz. Is there any compatibility with the two? Can I install the 2GB stick in my old laptop in the new laptop, and have both DDR2/DDR3 and 667MHz/1066MHz operating together? Or should I buy a new RAM stick for my new laptop?

    Read the article

  • CentOS only detecting 50% of ram

    - by Devator
    I have 16GB ram in my machine. Before, free -m outputted the normal 16 GB ram, however now (after a reboot) it only detects 8 GB ram. Is one ram module damaged? grep -i memory /var/log/dmesg outputs Memory: 15621184k/16017200k available (2535k kernel code, 387120k reserved, 1748k data, 196k init). (Which looks like 16 GB to me). Free -m outputs: total used free shared buffers cached Mem: 7484 7415 68 0 6104 524 -/+ buffers/cache: 786 6697 Swap: 2055 0 2054 Anything I might be missing? Thanks in advance.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >